Cold Lateral Condensation Technique Research Articles

Effectiveness of a silicon-based root canal sealer for filling of simulated lateral canals

The purpose of this in vitro study was to evaluate the ability of a silicon-based root canal sealer, compared to zinc oxide and eugenol and an epoxy resin-based sealers, for filling of simulated lateral canals. Thirty extracted single-rooted human teeth were selected, conventional access was made and the working length was established 1 mm from the apical foramen. Three simulated lateral canals, one in each root third (coronal, middle and apical) were prepared in both the mesial and distal surfaces of each tooth using a size 15 reamer adapted to a low-speed handpiece. Each root canal was instrumented using ProTaper rotary files up to file F3 at the working length, and then irrigated with 2.5% NaOCl followed by EDTA. The teeth were assigned to 3 groups (n=10), according to the root canal sealer: Roeko Seal (Group 1), Sealer 26 (group 2) and Grossman's sealer (Group 3). Gutta-percha cold lateral condensation technique was performed in all groups. Postoperative radiographs were taken and the images were projected for evaluation of the quality of lateral canal filling. Data were submitted to statistical analysis by Kruskal Wallis test at 5% significance level. The results showed that Grossman's sealer filled a larger number of lateral canals than Roeko Seal (p<0.05) and Sealer 26 (p<0.01). It may be concluded that Roeko Seal silicone-based root canal sealer was not as effective as the Grossman's sealer for filling of simulated lateral canals. The lateral canals localized in the apical third of the root were more difficult to be filled.

Resistance to fracture of roots filled with three different techniques

To compare the fracture resistance of roots filled with different materials. Thirty-four freshly extracted human maxillary central incisor teeth with similar dimension were selected. Crowns were sectioned at the cemento-enamel junction, and the length of the roots were adjusted to 13 mm. Following the preparation of the root canals and final irrigation with EDTA and saline, the 10 root canals in group 1 were filled with Resilon cones and Epiphany sealer, the 10 root canals in group 2 were filled with gutta-percha and AH 26 and the 10 root canals in group 3 were filled with gutta-percha and MCS Canal Sealer. All materials were used with a cold lateral condensation technique. Four root canals remained unfilled and were used as a control group. Tests for fracture strength were performed using a universal testing machine and a round tip that had a diameter of 4 mm. The force was applied vertically with a constant speed of 1 mm min(-1). For each root, the force at the time of fracture was recorded in Newtons. Results were evaluated statistically with ANOVA and Tukey Honestly Significant Difference (HSD) tests. The mean force of fracture values was 1043 N, 967 N, 859 N and 517.5 N for groups 3, 1 and 2 and the control group, respectively. There was a significant difference (P < 0.01) between the experimental groups and the control group. No significant differences were found between the three experimental groups. All the materials used in the present study reinforced the prepared root canals.

Quality of root canal fillings performed by undergraduate dental students on single-rooted teeth

Introduction: Root canal therapy is an accepted and successful form of tooth conservation. Educational guidelines require dental schools to ensure that their graduates are competent on graduation at performing root canal therapy. The aim of this investigation was to assess the technical quality of root canal fillings placed by undergraduate students in single-rooted teeth. Materials and methods: A total of 100 radiographs of root canal fillings placed by undergraduate students in single-rooted teeth were examined under even illumination in a darkened room using ×2 magnification. These were graded as ‘adequate’, where the root canal filling was within 2 mm of the radiographic apex, ‘under-filled’, where the root canal filling was >2 mm from the radiographic apex, and ‘over-filled’, where the root canal filling was extruded beyond the radiographic apex. The presence of voids, fractured instruments, and root perforations were also noted. Results: All teeth were obturated with gutta-percha and sealer (Roth Cement), using a cold lateral condensation technique. Of 100 teeth, 10% (n = 10) had voids. Of the remainder, 70% (n = 63) were judged to be ‘acceptable’, 21% (n = 19) were ‘under-filled’, and 9% (n = 8) were ‘over-filled’. There was no evidence of fractured instruments or root perforations in any root filling examined. Conclusions: The quality of root canal fillings placed in single-rooted teeth by undergraduate dental students at the University Dental School and Hospital, Cork was acceptable (63% of root fillings placed in single rooted teeth were graded as ‘adequate’). The probable reasons for this are multi-factorial, but may be linked to the amount of pre-clinical and clinical teaching in endodontics at the University Dental School and Hospital, Cork. It should be remembered that factors other than radiographic quality/evidence must be considered when determining the outcome of root canal therapy.

Quality of root canal fillings performed by undergraduate dental students on single‐rooted teeth*

Root canal therapy is an accepted and successful form of tooth conservation. Educational guidelines require dental schools to ensure that their graduates are competent on graduation at performing root canal therapy. The aim of this investigation was to assess the technical quality of root canal fillings placed by undergraduate students in single-rooted teeth. A total of 100 radiographs of root canal fillings placed by undergraduate students in single-rooted teeth were examined under even illumination in a darkened room using x2 magnification. These were graded as 'adequate', where the root canal filling was within 2 mm of the radiographic apex, 'under-filled', where the root canal filling was >2 mm from the radiographic apex, and 'over-filled', where the root canal filling was extruded beyond the radiographic apex. The presence of voids, fractured instruments, and root perforations were also noted. All teeth were obturated with gutta-percha and sealer (Roth Cement), using a cold lateral condensation technique. Of 100 teeth, 10% (n = 10) had voids. Of the remainder, 70% (n = 63) were judged to be 'acceptable', 21% (n = 19) were 'under-filled', and 9% (n = 8) were 'over-filled'. There was no evidence of fractured instruments or root perforations in any root filling examined. The quality of root canal fillings placed in single-rooted teeth by undergraduate dental students at the University Dental School and Hospital, Cork was acceptable (63% of root fillings placed in single rooted teeth were graded as 'adequate'). The probable reasons for this are multi-factorial, but may be linked to the amount of pre-clinical and clinical teaching in endodontics at the University Dental School and Hospital, Cork. It should be remembered that factors other than radiographic quality/evidence must be considered when determining the outcome of root canal therapy.

Apical Leakage of Resin Based Root Canal Sealers with a New Computerized Fluid Filtration Meter

Abstract In this in vitro study, the apical leakage of three root-canal sealers: AH Plus, Diaket, and EndoREZ was evaluated using a new computerized fluid filtration meter. Forty-five extracted human premolar teeth with single root and canal were used. The coronal part of each tooth was removed and the root canals were prepared using GT Rotary files and crown-down technique. The roots were randomly divided into three groups of 15 samples, filled with one of the test materials and gutta-percha cones by the cold lateral condensation technique and were stored at 37°C and 100% humidity for 7 days. One-week later, apical parts of roots of 10 ± 0.05 mm were attached to computerized fluid filtration meter. Apical leakage quantity was determined as μl/cmH 2O/min −1. Statistical analysis indicated that root fillings with Diaket in combination with cold lateral condensation technique showed lower apical leakage than the others (p < 0.05). In addition, this new computerized fluid filtration meter allowed quantitative measurement of leakage easily. As it is a newly developed device to measure apical leakage of endodontic sealers, the reliability of it needed to be tested.

In vitroEvaluation Of Three Techniques To Obturate 0.06 Taper Canal Preparations

The aim of this study was to evaluate the ability of three obturation methods to seal root canals prepared using 0.06 taper rotary instruments. Forty-five extracted human single-rooted teeth were instrumented with 0.06 taper Profile nickel-titanium rotary files and randomly divided into three experimental groups containing 15 teeth each. The first group was obturated using the System B technique with 0.06 taper standardised gutta-percha points, the second group was obturated using the System B technique with non-standardised MF gutta-percha points, the third group was obturated by cold lateral condensation technique using standardised 0.02 taper master gutta-percha points. Apical leakage of the roots was evaluated by dye penetration using a stereomicroscope after sectioning the roots. The group obturated using System B and 0.06 taper gutta-percha points showed the least dye penetration. However, the difference in the linear extent of dye penetration was not statistically significant.

Survey of attitudes, materials and methods employed in endodontic treatment by general dental practitioners in North Jordan.

BackgroundGeneral dental practitioners provide the majority of endodontic treatment in Jordan. The aim of this study was to gather information on the methods, materials and attitudes employed in root canal treatment by dentists in North Jordan, in order to evaluate and improve the quality of current practice.MethodsA questionnaire was posted to all registered general dental practitioners working in private practice in Irbid Governate in North Jordan (n = 181). The questionnaire included information on methods, materials and techniques used in endodontic treatment.ResultsReply rate was 72% (n = 131). The results demonstrated that only five dentists used rubber dam occasionally and not routinely. The majority used cotton rolls for isolation solely or in combination with a high volume saliva ejector (n = 116). The most widely used irrigants were sodium hypochlorite and hydrogen peroxide, which were used by 32.9% (n = 43) and 33.6% (n = 44) of the respondents, respectively. Forty eight percent of the respondents (n = 61) used the cold lateral condensation technique for canal obturation, 31.3% (n = 41) used single cone, 9.9% (n = 13) used vertical condensation and 12.2% (n = 16) used paste or cement only for the obturation. The majority used zinc oxide eugenol as a sealer (72.5%). All, but one, respondents used hand instruments for canal preparation and the technique of choice was step back (52.7%). More than 50% (n = 70) of the dentists took one radiograph for determining the working length, whilst 22.9% (n = 30) did not take any radiograph at all. Most practitioners performed treatment in three visits for teeth with two or more root canals, and in two visits for teeth with a single root canal.ConclusionsThis study indicates that dentists practicing in North Jordan do not comply with international quality standards and do not use recently introduced techniques. Many clinicians never take a radiograph for determining the working length and never used rubber dam or intra-canal medicaments.

Effect of calcium hydroxide as an intracanal dressing on apical leakage.

In this in vitro study, we investigated the effects of the use of two different calcium hydroxide (Ca(OH)2) preparations as an intracanal dressing on the sealing ability of two different sealers were investigated. Eighty-eight freshly extracted, single-rooted maxillary anterior teeth were used. After the root canals were hand-instrumented, they were divided into six groups of 10 each. The root canals were dressed with Ca(OH)2 paste, either mixed with sterile water (in groups 1 and 2) or with glycerine (in groups 3 and 4). The dressed root canals were incubated in 100% humidity at 37 degrees C for 7 days. In groups 5 and 6, the root canals were not dressed. After the root canal dressings were removed by irrigation with 5.25% NaOCl and reaming with a K-type file, all canals of the experimental groups were obturated with sealer and gutta-percha using a cold lateral condensation technique. Calciobiotric Root Canal Sealer, (CRCS), (in groups 1, 3 and 5) and Diaket (in groups 2, 4 and 6) were used as sealers. All specimens were placed in India ink for 7 days, and the amount of apical leakage was scored. Eight further prepared specimens were dressed with Ca(OH)2 plus water or Ca(OH)2 plus glycerine and examined with scanning electron microscopy (SEM) following the removal of dressings. There was a statistical difference in the leakage patterns amongst the 6 experimental groups (P < 0.05). Specimens in group 2 exhibited less leakage than the other experimental groups, except group 4 (P < 0.05). There were no other significant interactions. SEM examination revealed that Ca(OH)2 crystals were present on the surface of smear layer in both groups where Ca(OH)2 paste had been placed, but they did not penetrate into the dentinal tubules.

Root positioning and leakage to dye in extracted teeth using reduced pressure

A study was conducted in vitro to assess the root apex position on leakage to dye under reduced pressure (560 mm Hg). A total of 132 extracted single-rooted teeth were randomly allocated to four groups. The teeth were prepared using a step-back technique and sealed with the cold lateral condensation technique, using gutta-percha without sealer. No significant differences (P < 0.813) were found between horizontally positioned experimental groups under reduced pressure and those in passive immersion. In the group in which the apices were in an upright position, the mean leakage was significantly different (P < 0.024) from the mean dye penetration in the group of teeth positioned horizontally under reduced pressure. Those teeth with apices upright allowed the most linear leakage (0.51 mm), whereas the groups in which the roots were horizontally positioned (with and without reduced pressure) had the least dye penetration (0.21 mm and 0.19 mm, respectively). These results show that tooth positioning has a significant effect on linear dye penetration under reduced pressure and emphasize the need to standardize factors that may influence penetration when assessing leakage study methodology.

Root positioning and leakage to dye in extracted teeth using reduced pressure

A study was conducted in vitro to assess the root apex position on leakage to dye under reduced pressure (560 mm Hg). A total of 132 extracted single-rooted teeth were randomly allocated to four groups. The teeth were prepared using a step-back technique and sealed with the cold lateral condensation technique, using gutta-percha without sealer. No significant differences (P < 0.813) were found between horizontally positioned experimental groups under reduced pressure and those in passive immersion. In the group in which the apices were in an upright position, the mean leakage was significantly different (P < 0.024) from the mean dye penetration in the group of teeth positioned horizontally under reduced pressure. Those teeth with apices upright allowed the most linear leakage (0.51 mm), whereas the groups in which the roots were horizontally positioned (with and without reduced pressure) had the least dye penetration (0.21 mm and 0.19 mm, respectively). These results show that tooth positioning has a significant effect on linear dye penetration under reduced pressure and emphasize the need to standardize factors that may influence penetration when assessing leakage study methodology.

Effect of two obturation techniques on the filling of lateral canals and the main canal

The three-dimensional obturation of the root canal system is widely accepted as a key factor for successful endodontic therapy. The purpose of this study was to evaluate the obturation of lateral canals and the main canal using cold lateral condensation versus the gutta-percha coated rigid carrier. Thirty epoxy blocks with five lateral canals placed at varying angles from the main canal were used. Each experimental group was obturated by a board certified endodontist with clinical experience in the respective obturation technique. The length of gutta-percha and sealer in the lateral canals was measured under a microscope (x30, Unitron) to the nearest 0.5 mm. The blocks were sectioned with an Isomet Plus precision saw (Buehler, Lake Bluff, IL) and copious water irrigation perpendicular to the main canal at the apex, the height of contour, and at 0.8, 1.6 and 2.4 mm from the canal apex. A microscope (x100, Leitz, Switzerland) was used to determine voids. There was significantly (p < .001) more gutta-percha in the lateral canals with the gutta-percha coated rigid carrier technique. In contrast, the cold lateral condensation technique had significantly (p < .001) more sealer in the lateral canals. However, there was no significant (p < .05) difference, in gutta-percha-plus-sealer filling of the lateral canals, between the two techniques. In the apical 1 mm of the main canal there were significantly (p < .011) fewer voids with the gutta-percha coated rigid carrier technique compared to the cold lateral condensation. In the model chosen, the gutta-percha coated rigid carrier technique and the cold lateral condensation technique were equally effective in filling lateral canals. In filling the main canal, however, the coated rigid carrier technique was more effective.

Influence of age on the extent of voids in root canals sealed using a cold lateral condensation technique.

The aim of this study was to examine whether it is more difficult to achieve complete obturation of the root canal in teeth from different age groups, using the measurement of voids within the obturated canal to determine the quality of endodontic therapy. One-hundred and fifty-two single-rooted premolar teeth extracted from patients of known age were collected. Following cleaning and storage the teeth were decoronated and radiographed. Forty selected teeth were allocated to one of four age-groups, (under 20, 20-35, 36-50, over 50 years) each consisting of 10 teeth. The working length was determined radiographically and preparation was carried out using the step-back technique. Each canal was obturated using cold lateral condensation with Tubliseal cement. The roots were then sectioned longitudinally and photographed. Sections and transparencies were subjected to image analysis to determine the total areas of root canal, sealer and voids respectively and statistical analysis of the differences between the various age groups was undertaken. There was a trend towards a reduction in the areas of sealer and sealer plus void with respect to increasing age group, although no significant differences existed. A significant relationship (P < 0.05) was found between the area of voids found in the youngest group when compared with all other groups, the greatest cumulative area of voids being found in the youngest teeth.

Evaluation of the dimensional stability of different thermoplasticized gutta‐percha fillings using simulated glass root canals

The dimensional stability of different thermoplasticized gutta-percha fillings was analyzed using simulated glass canals. For comparison, gutta-percha fillings obtained with the cold lateral condensation technique was used. The evaluation was done at 0 min, 2 min, 5 min, and 30 min after the filling was completed. The general analysis showed statistically significant differences between 0 min and 5 min-30 min recordings. No significant differences were found between 0 min and 2 min, and between 2 min, 5 min, and 30 min. Although warm lateral condensation resulted in a poor obturation, it was the only thermoplasticized technique analyzed that did not produce significant volumetric changes between 0 min and 30 min. All the other thermoplasticized filling techniques showed important shrinkage during cooling.

Fluid transport and bacterial penetration along root canal fillings.

Convective transport of water from the coronal to the apical end of obturated root canals was determined by the movement of an air bubble in a capillary glass tube connected to the apex of the experimental root section using a headspace pressure of 120 kPa (1.2 atm). Water transport through existing voids in the obturated canals could be measured reproducibly in this way. The root canals of 60 human maxillary canines were filled with gutta-percha and sealer by the cold lateral condensation technique. Thirty of these were first exposed to a small motile bacterium, Pseudomonas aeruginosa, growing in a reservoir at the coronal end of each root. After 50 days, two specimens allowed penetration of bacteria to a reservoir at the apical end. All the roots were then assessed quantitatively for convective transport of water. The results were divided into three defined categories: 39 obturated canals were in the 'bacteria tight' category, 14 canals in the 'slight leakage' and 7 canals in the 'gross leakage' category. The two specimens that showed bacterial penetration fell into the slight and gross leakage categories. The previous test for bacterial passage did not statistically influence the fluid transport pattern of these roots which was measured subsequently. These findings indicate that fluids transport through obturated root canals, most of which do not allow the passage of bacteria.

Endodontic leakage studies reconsidered. Part I. Methodology, application and relevance.

An increasing number of endodontic leakage studies have been published. In the 1990 volumes of Journal of Endodontics and International Endodontic Journal, there was one leakage study to every 4.3 scientific articles. The most popular method was linear measurement of tracer (dye or radioisotope) penetration along a root filling. Comparing some data on linear measurement of dye penetration following the cold lateral condensation of gutta-percha that were published between 1980 and 1990, a high level of variation has been found, although the experimental methods used in these studies were quite similar. In almost all studies evaluating various techniques, the cold lateral condensation technique has been used as a standard control for comparison. The reliability of these results is questionable. The problems with such studies are discussed. It seems that more research should be done on leakage study methodology, instead of continuing to evaluate the sealing ability of different materials and techniques by methods that may give little relevant information.