Energy Resources Research Articles

Comparative Analysis of Market Clearing Mechanisms for Peer-to-Peer Energy Market Based on Double Auction

This paper aims to develop an optimisation-based price bid generation mechanism for the sellers and buyers in a double-auction-aided peer-to-peer (P2P) energy trading market. With consumers being prosumers through the continuous adoption of distributed energy resources, P2P energy trading models offer a paradigm shift in energy market operation. Thus, it is essential to develop market models and mechanisms that can maximise the incentives for participation in the P2P energy market. In this sense, the proposed approach focuses on maximising profit at the sellers, as well as maximising cost savings at the buyers. The bids generated from the proposed approach are integrated with three different market clearing mechanisms, and the corresponding market clearing prices are compared. A numerical analysis is performed on a real-life dataset from Ausgrid to demonstrate the bids generated from sellers/buyers, as well as the associated market clearing prices throughout different months of the year. It can be observed that the market clearing prices are lower when the solar generation is higher. The statistical analysis demonstrates that all three market clearing mechanisms can achieve a consistent market clearing price within a range of 5 cents/kWh for 50% of the time when trading takes place.

The role of natural resources rent, energy efficiency and governance in reducing pollution – New evidence with MMQR method

AbstractThe question on whether natural resources are a curse or not remain with no satisfactory answer. There are two opposing school of thoughts on the role of natural resources rent in fostering sustainable development, that is, the natural resource curse and Rostow's hypothesis. The study uses the data of the 15 natural resources‐rich African countries, for the period ranging from 1990 to 2021. The Methods of Moments Quantile Regression with fixed effects, a contemporary method that gives heterogeneous results across quantiles is employed to ensure robust outcomes. Cross‐sectional dependence, dynamics and heterogeneity are catered for in the model. The major results presented in this research shows that the rule of law is fundamental in reducing pollution. Energy efficiency and the use of renewable energy resources is also observed to strongly lower the emission of carbon. Most importantly, the study results depict that natural resources rent exacerbates carbon emission; hence, supporting the postulations of the resources curse hypothesis that natural resources are counter‐productive. We also show that economic growth, along with non‐renewable energy worsens pollution. The major policies presented in this research are to promote renewable energy use, rule of law and efficient use of energy to attain sustainable development. This research bridges the gap in the literature by examining the effects of natural resources rent on carbon emission, a study that has not been widely covered. The present research also brings the importance of governance in reducing pollution in the natural resources‐rich African countries.

Modification of Poly(3-Hydroxybutyrate) with a Linear Polyurethane Modifier and Organic Nanofiller-Preparation and Structure-Property Relationship.

The growing demand for products made of polymeric materials, including the commonly used polypropylene (PP), is accompanied by the problem of storing and disposing of non-biodegradable waste, increasing greenhouse gas emissions, climate change and the creation of toxic products that constitute a health hazard of all living organisms. Moreover, most of the synthetic polymers used are made from petrochemical feedstocks from non-renewable resources. The use of petrochemical raw materials also causes degradation of the natural environment. A potential solution to these problems is the use of biopolymers. Biopolymers include biodegradable or biosynthesizable polymers, i.e., obtained from renewable sources or produced synthetically but from raw materials of natural origin. One of them is the poly(3-hydroxybutyrate) (P3HB) biopolymer, whose properties are comparable to PP. Unfortunately, it is necessary to modify its properties to improve its processing and operational properties. In the work, hybrid polymer nanobiocomposites based on P3HB, with the addition of chain, uncross-linked polyurethane (PU) and layered aluminosilicate modified with organic salts (Cloisite®30B) were produced by extrusion process. The introduction of PU and Cloisite®30B to the polymer matrix (P3HB) influenced the processing parameters beneficially and resulted in a decrease in the extrusion temperature of more than 10 °C. The influence of the simultaneous addition of a constant amount of PU (10 m/m%) and the different amounts of nanoadditives (1, 2 and 3 m/m%) on the compatibility, morphology and static mechanical properties of the resulted nanobiocomposites were examined. The component interactions by Fourier transformation infrared spectroscopy (FTIR) analysis, nano- and microscale structure studies using small-angle X-ray scattering (SAXS) and morphology by scanning electron microscopy (SEM) were carried out, and the hardness and tensile strength of the obtained polymer nanobiocomposites were determined. FTIR analysis identified the compatibility of the polyester matrix, PU, and organomodified montmorillonite, the greatest being 3 m/m% Cloisite30B content. The addition of PU to the polyester elasticizes the material and decreases the material's strength and ductility. The presence of nanoclay enhanced the mechanical properties of nanobiocomposites. The resulting nanobiocomposites can be used in the production of short-life materials applied in gardening or agriculture.

ZnxMnO2/PPy Nanowires Composite as Cathode Material for Aqueous Zinc‐Ion Hybrid Supercapacitors

ABSTRACTOver the past decade, the extensive consumption of finite energy resources has caused severe environmental pollution. Meanwhile, the promotion of renewable energy sources is limited by their intermittent and regional nature. Thus, developing effective energy storage and conversion technologies and devices holds considerable importance. Zinc‐ion hybrid supercapacitors (ZISCs) merge the beneficial aspects of both supercapacitors and batteries, rendering them an exceptionally promising energy storage method. As an important cathode material for ZISCs, the tunnel structure MnO2 has poor conductivity and structural stability. Herein, the ZnxMnO2/PPy (ZMOP) electrode materials are prepared by hydrothermal method. Doping with Zn2+ is used to enhance its structural stability, while adding polypyrrole to improve its conductivity. Therefore, the fabricated ZMOP cathode presents superb specific capacity (0.1 A g−1, 156.4 mAh g−1) and remarkable cycle performance (82.6%, 5000 cycles, 0.2 A g−1). Furthermore, the assembled aqueous ZISCs with ZMOP cathode and PPy‐derived porous carbon nanotube anode obtain a superb capacity of 109 F g−1 at 0.1 A g−1. Meanwhile, at a power density of 867 W kg−1, the corresponding energy density can achieve 20 Wh kg−1. And over 5000 cycles at 0.2 A g−1, the cycle performance of ZISCs maintains at 86.4%, which exhibits excellent cycle stability. This suggests that ZMOP nanowires are potential cathode materials for superior‐performance aqueous ZISCs.

Dielectric Elastomer Generators: Recent Advances in Materials, Electronic Circuits, and Prototype Developments

The ongoing climate crisis requires innovative methods to maximize renewable and sustainable energy resources. There have been advancements in harvesting energy from ambient motions such as wind, ocean waves, and human movements. Dielectric elastomer generators (DEGs) are a promising option for energy harvesting due to their high energy density and compatibility with low‐frequency oscillations. This review provides an in‐depth overview of DEGs, including electroactive materials, electromechanical characterization, electronics for harvesting, interfacing circuits, prototypes, and challenges. DEGs have the potential to play a significant role in decarbonizing energy for both small‐ and large‐scale applications using ambient energy sources.

CHARACTERISTICS OF THE DEVELOPMENT OF THE GAS SUPPLY SYSTEM IN THE REPUBLIC OF ARMENIA

Gas distribution and transportation networks make up the gas supply system. Providing natural gas to the public and the economy is the primary objective of the gas delivery system. Every nation's gas supply network is strategically vital since the cost of natural gas directly impacts the goods and services that are produced and rendered there. It is true that developed nations are looking for innovative technology for natural gas extraction because it is a non-renewable resource. Founded during the Soviet era and throughout multiple phases of development, the Republic of Armenia's gas supply system is a component of the worldwide network. The Public Services Regulatory Commission and the Armenian government, through the Ministry of Territorial Administration and Infrastructure, oversee the country's gas supply industry. The article discusses the Republic of Armenia's domestic natural gas market's supply and sales, its background and present state, investment initiatives, and features that increase the system's operational efficiency.

Photorespiratory Metabolism and Its Regulatory Links to Plant Defence Against Pathogens.

When plants face biotic stress, the induction of defence responses imposes a massive demand for carbon and energy resources, which could decrease the reserves allocated towards growth. These growth-defence trade-offs have important implications for plant fitness and productivity and influence the outcome of plant-pathogen interactions. Biotic stress strongly affects plant cells' primary metabolism, including photosynthesis and respiration, the main source of energy and carbon skeletons for plant growth, development, and defence. Although the nature of photosynthetic limitations imposed by pathogens is variable, infection often increases photorespiratory pressure, generating conditions that promote ribulose-1,5-bisphosphate oxygenation, leading to a metabolic shift from assimilation to photorespiration. Photorespiration, the significant metabolic flux following photosynthesis, protects the photosynthetic apparatus from photoinhibition. However, recent studies reveal that its role is far beyond photoprotection. The intermediates of the photorespiratory cycle regulate photosynthesis, and photorespiration interacts with the metabolic pathways of nitrogen and sulphur, shaping the primary metabolism for stress responses. This work aims to present recent insights into the integration of photorespiration within the network of primary metabolism under biotic stress. It also explores the potential implications of regulating photosynthetic-photorespiratory metabolism for plant defence against bacterial and fungal pathogens.

Exploring the thermal conductivity of green filamentous algae natural fibre: an experimental investigation

Abstract The use of non-renewable resources in thermal insulation has significant environmental impacts. Another major problem faced by the ecosystem is the invasive growth of water weeds. Making sustainable products from waterweeds helps to prevent its overgrowth that disrupts the balance of the ecosystem. This study explores the viability of Green Filamentous Algae (GFA) as an eco-friendly thermal insulation material. GFA was collected from water bodies, cleaned, and processed into two forms: untreated (UTD) and alkali-treated (TD). Experimental investigations were conducted to evaluate the physical properties of GFA, including density, self-ignition temperature, water absorption, moisture absorption, flammability, and thermal conductivity. Results show that the untreated GFA had a density of 402.52 kg m−3, while the treated GFA exhibited a slightly lower density of 392.32 kg m−3. The self-ignition temperature for both untreated and treated GFA was measured between 275 °C and 280 °C. The water absorption capacity was higher in treated GFA (654.7%) compared to untreated (493.83%). Moisture absorption capacity was 15.14% for untreated GFA and 17.47% for treated GFA. Flammability tests revealed a burning rate of 20.026 mm min−1, placing GFA in the combustibility classification 1 (CC1). Thermal conductivity values were found to be 0.308 W m−1K−1 (UTD) and 0.273 W m−1K−1 (TD), making treated GFA a promising candidate for sustainable insulation applications. This study demonstrates the potential of GFA as a bio-based insulation material and highlights future improvements to enhance its moisture resistance and thermal performance.

Assessing the environmental impact of institutional quality at aggregate and disaggregate levels: The role of renewable and non-renewable energy consumption and trade in MENA countries

Assessing the environmental impact of institutional quality at aggregate and disaggregate levels: The role of renewable and non-renewable energy consumption and trade in MENA countries

Exploring Recent Advances in Lignocellulosic Biomass Waste Delignification Through the Combined Use of Eutectic Solvents and Intensification Techniques

Growing awareness of resource sustainability and waste management has driven the search for circular-economy solutions. Lignocellulosic biomass waste, the most abundant renewable carbon resource, offers green potential as an alternative to declining non-renewable fuels. However, due to its recalcitrant nature, it requires pre-processing to convert it into valuable products like energy and chemicals. Biorefineries play a key role in this process by promoting the integral use of biomass, by finding ways to utilize lignin, previously treated as waste. Common pretreatment methods are unsustainable, prompting research into eco-friendly solvents and advanced techniques like ultrasound- and microwave-assisted methods. Recent approaches have also explored the use of eutectic solvents, which, when combined with these intensification techniques, offer promising results. These green technologies improve delignification efficiency, which in turn improves the saccharification process, reduces solvent use, and minimizes environmental impact. Despite progress, challenges remain in making these methods economically viable and adaptable to diverse biomass types. This review article highlights recent advances in sustainable treatment technologies, including the combined use of eutectic solvents and process-intensification techniques, and the potential of the obtained lignin in various industrial applications. It also discusses future prospects for more environmentally friendly processes in biomass utilization.

Use of Distributed Energy Resources Integrated with the Electric Grid in the Amazon: A Case Study of the Universidade Federal do Pará Poraquê Electric Boat Using a Digital Twin

Electric mobility is a global trend and necessity, with electric and solar boats offering a promising alternative for transportation electrification and carbon emission reduction, especially in the Amazon region. This study analyzes the system of a solar boat from an electric mobility project—to be implemented at Universidade Federal do Pará (UFPA)—using MATLAB software for modeling. The Simulink tool was utilized to model the system, focusing on operational parameters such as module voltage, converter voltage, and speed. The results indicate that the solar boat’s operational cost is significantly lower compared to a similar internal combustion model, considering diesel’s high consumption and cost. The environmental impact is also reduced, with nearly 72 tons of CO2 emissions avoided annually, thanks to Brazil’s renewable energy matrix. Simulations confirmed the project’s parameters, demonstrating the efficiency of digital-twin technology in monitoring and predicting system performance. The study underscores the importance of digital twins and renewable energy in promoting sustainable transportation solutions, advocating for the replication of such projects globally. Future research should focus on further advancing digital-twin applications in electric mobility to enhance predictive maintenance and operational efficiency.

Event-Triggered Transmission of Sensor Measurements Using Twin Hybrid Filters for Renewable Energy Resource Management Systems

Recently, solar and wind power generation have gained attention as pathways to achieving carbon neutrality, and Renewable Energy Resource Management System (RERMS) technology has been developed to monitor and control small-scale, distributed renewable energy resources. In this work, we present an Event-Triggered Transmission (ETT) algorithm for RERMS, which transmits sensor measurements to the base station only when necessary. The ETT algorithm helps prevent congestion in the communication channel between RERMS and the base station, avoiding time delays or packet loss caused by the excessive transmission of sensor measurements. We design a hybrid state estimation algorithm that combines Kalman and Finite Impulse Response (FIR) filters to enhance the estimation performance, and we propose a new ETT algorithm based on this design. We evaluate the performance of the proposed algorithm through experiments that transmit actual sensor measurements from a photovoltaic power generation system to the base station, demonstrating that it outperforms existing algorithms.

How Road and Rail Transport Respond to Economic Growth and Energy Prices: A Study for Poland

Transport drives economies. This statement covers complex and multifaceted economic, environmental, and political issues. The literature mainly describes the unidirectional impact of transport on the economy, and far less often bilateral or reverse impacts. This is the context in which this study was conducted. The question of whether the economy (GDP and exports and imports) and energy prices (crude oil and diesel) have an impact on road and rail transport in Poland was examined. The research was based on correlation methodology and VAR modelling for the January 2010–March 2024 period (quarterly data). It was found that there is no sufficiently strong basis to speak of an inverse relationship, i.e., that the economy is the cause of transport. This confirms the majority of studies, but it has been shown that this relationship occurs in the current period. And this statement means that both road transport, which is developing, and rail transport, which is declining in Poland, are able to serve the economy on a continuous basis. Moreover, rail transport is positively affected by changes in fuel prices, but the basic energy resource used in rail transport is not fuel but electricity. Therefore, as fuel prices rise, investment in rail transport or combined transport can have positive economic and environmental effects in the future.

Frequency-Voltage-var Function for Active Front-end VFD on Oil and Gas Platforms with Offshore Wind Generation

Renewable energy resources emerge as a sustainable alternative to augmenting the energy supply of floating production storage and offloading (FPSO) platforms. However, the increased generation at FPSO based on converter-interfaced energy decreases the system-equivalent inertia constant, which becomes more susceptible to frequency deviations. This paper proposes and evaluates the combined frequency-voltage-var control performance to mitigate frequency variation in a typical FPSO unit with penetration of floating wind energy generation. The control functions are communication-free and embedded in the active front-end variable frequency drives (AFE-VFDs), which are installed on the FPSO and have the primary function of controlling the speed of water injection pumps. The FPSO electrical power system model is developed in MATLAB/Simulink®. Comparative results obtained from the AFE-VFD equipped with volt-var, freq-var, and combined freq-volt-var functions are shown to highlight the proposed solution merits. The results have shown a conflicting behavior with the frequency and voltage deviation improvement associated with absorption and injection of reactive power, respectively. Accordingly, the frequency-volt-var prioritizes frequency deviations during heavy transient events and voltage deviations during regular operation.

Evidence of Strategic Information Literacy Practices in Early Career Teachers' Navigation of TeachersPayTeachers

Teachers Pay Teachers (TPT) has emerged as the most popular online educational marketplace of the moment, but exactly how curriculum marketplaces support professional learning and classroom curriculum design is still an emerging area of inquiry in educational research. This paper explores the perspectives of six novice teachers on the supplemental teaching materials available on TPT. Through semi-structured think-aloud interviews, we identified tensions related to teachers’ landscapes of practice, institutional mistrust, perceived authoritativeness of TPT sellers, curriculum marketplaces as altruistic platforms, and the affordances and constraints of TPT for managing finite resources. Findings suggest that professionals who work with preservice and in-service teachers must reframe their discussion of curriculum marketplaces toward developing early-career teachers’ critical curriculum cultivation practices. Such reframing has the potential to influence how educators make use of online curriculum marketplaces, what resources they download, and how those resources are employed.

Relationship between tooth macrowear and jaw morphofunctional traits in representative hypercarnivores.

The mammalian adult dentition is a non-renewable resource. Tooth attrition and disease must be accommodated by individuals using behavioral, physiological, and/or musculoskeletal shifts to minimize impact on masticatory performance. From a biomechanical perspective, the musculoskeletal system becomes less efficient at producing bite force for a given amount of muscle input force over an individual's life, because tooth-food contact area increases as cusps wear. In this study we ask the question: does mandibular biomechanical performance show evidence of compensation with increasing tooth wear? We use representative taxa of three carnivoran ecomorphologies (meat specialist, scavenger, bone cracker) as a study system to compare morphofunctional data on tooth macrowear, jaw depth, bite mechanical efficiency, and jaw stress during biting. No significant shifts in adult mandibular corpus dimensions occurs in the sampled taxa as canine and carnassial teeth wear. In bone cracking spotted hyenas carnassial biting mechanical efficiency increases significantly with increasing tooth wear, with no significant change in mandibular stress. Analyses of the fossil carnivore Hyaenodon suggests an increase in canine biting efficiency with increased tooth wear, but this may reflect interspecific variation or phylogenetic contingency rather than a life history shift. Overall, these findings indicate that scavenging hyaenids and felid meat specialists do not exhibit morphofunctional compensation for the decreased mechanical capability of worn and dull teeth. Behavioral modifications, rather than musculoskeletal adjustments, may instead play a major role in maintaining food acquisition and processing capabilities for individuals surviving into advanced ontogenetic age and tooth wear. These observations highlight the mammalian masticatory system as having a dynamic performance profile through its useful lifespan, and encourage a more nuanced understanding of past and present carnivore guilds by considering wear-dependent performance changes as a possible source of selection.

THE POTENTIAL FOR PEER-TO-PEER ELECTRICITY TRADING IN GEORGIA

The global energy transition is fundamentally reshaping electricity markets, moving from centralized systems reliant on fossil fuels to decentralized, renewable energy solutions. Distributed energy resources such as solar panels and storage batteries are empowering consumers to become active participants in the energy market. Peer-to-peer (P2P) electricity trading, enabled by blockchain technology, presents a new model for consumers to trade surplus energy directly with one another, bypassing traditional suppliers. This article explores the potential of P2P electricity trading in Georgia, a country with significant renewable energy resources but limited experience with decentralized energy systems. As Georgia aligns its energy policies with European regulations, the development of a P2P trading market could enhance energy security, empower prosumers, and drive local economic development. Through an analysis of global trends, technological innovations, and the current Georgian energy landscape, this article assesses the opportunities and challenges in implementing P2P trading. By building the necessary infrastructure and fostering public participation, Georgia has the potential to transform its energy market and contribute to a more resilient and sustainable energy future.

FIELD PERFORMANCE OF HOT IN-PLANT PRODUCED ASPHALTIC CONCRETE WEARING COURSE (ACWC) WITH 30% RECLAIMED ASPHALT PAVEMENT (RAP)

Hot in-plant recycling stands as an effective yet underutilized method in Malaysia for reusing pavement milling waste, resulting in insufficient established benchmarks and validated trials. The Utilization of Reclaimed Asphalt Pavement (RAP) can divert a significant amount of waste asphalt millings from landfills, while conserving energy and natural resources. This study focused on the recycled mixture, ACWC-30RAP, which integrated 30% Reclaimed Asphalt Pavement (RAP). In July 2022, a 400 m trial lay was conducted from KM413.90 to KM414.30 Southbound (SB), Section C3, along the PLUS North-South Expressway (NSE). Field tests were systematically conducted on both the ACWC-30RAP and conventional ACWC20 mixtures at different phases including month-6, month-9, and month-12 post-construction. The primary objective was to assess fundamental properties related to the structural stiffness of pavement layers as well as the pavement performance and condition for both trial sections using various field testing including Falling Weight Deflectometer (FWD) and Multi-Laser Profiler (MLP). Following the 12-month trial period, both the ACWC-30RAP and conventional ACWC20 mixtures experienced actual traffic loading and environmental conditions. Remarkably, the ACWC-30RAP demonstrated comparable field performance as the conventional ACWC20. This alignment in performance signified a promising avenue for employing the recycled mixture with high RAP content. Using ACWC-30RAP can also provide economic benefit, reducing the production cost by approximately 25%. In essence, the ACWC-30RAP had achieved an equivalent level of confidence to the conventional ACWC20 mixture, which was exclusively composed of virgin materials. cts.

Breeding and biotechnology approaches to enhance the nutritional quality of rapeseed byproducts for sustainable alternative protein sources- a critical review.

Global protein consumption is increasing exponentially, which requires efficient identification of potential, healthy, and simple protein sources to fulfil the demands. The existing sources of animal proteins are high in fat and low in fiber composition, which might cause serious health risks when consumed regularly. Moreover, protein production from animal sources can negatively affect the environment, as it often requires more energy and natural resources and contributes to greenhouse gas emissions. Thus, finding alternative plant-based protein sources becomes indispensable. Rapeseed is an important oilseed crop and the world's third leading oil source. Rapeseed byproducts, such as seed cakes or meals, are considered the best alternative protein source after soybean owing to their promising protein profile (30%-60% crude protein) to supplement dietary requirements. After oil extraction, these rapeseed byproducts can be utilized as food for human consumption and animal feed. However, anti-nutritional factors (ANFs) like glucosinolates, phytic acid, tannins, and sinapines make them unsuitable for direct consumption. Techniques like microbial fermentation, advanced breeding, and genome editing can improve protein quality, reduce ANFs in rapeseed byproducts, and facilitate their usage in the food and feed industry. This review summarizes these approaches and offers the best bio-nutrition breakthroughs to develop nutrient-rich rapeseed byproducts as plant-based protein sources.

INVESTIGATION ON CORROSION AND FLEXURAL BEHAVIOUR OF REINFORCED CONCRETE USING MARINE SAND

Traditionally, the construction industry relies on both manufactured sand (known as MF-Sand) and river sand as primary constituents for fine aggregates. However, in response to the dwindling supply of river sand, the contemporary preference is firmly in favor of MF-Sand. This research focuses the utilization of meticulously cleaned marine sand (referred to as MR-Sand) as a superior substitute for MF-Sand, aiming to curtail the reliance on and depletion of river sand, a finite natural resource. The objective of this research is to examine the mechanical property of flexural performance of Reinforced Cement Concrete (RCC) Beam and durability study of concrete using corrosion test in which washed MR - Sand as a fine aggregate in partial replacement of MF-Sand from 20% to 60%. The physical and chemical characteristics of treated and untreated marine sand are compared with a view to better comprehending the features of MR and MF-Sand. Experimental research works have been carried out to look into the corrosion test and flexural strength in order to better understanding the strength and durability attributes of concrete. The values for flexural strength, ultimate load, load-deflection, load-strain, and crack pattern have been compared for the RCC beam specimens MF100, MR20, MR40 and MR60. The findings indicate that 60% of MR-Sand possesses the desired properties of strength and durability of concrete. Additionally, Finite Element Analysis is carried out using the ABAQUS software to further validate the experimental findings of load-deflection, load carrying capacity, crack pattern and flexural strength.