Coal-fired Power Plants Research Articles

Monitoring For Elemental Composition Of Particulate Matter Deposited In Snow Cover Around Coal-Fired Thermal Power Plant (Karaganda, Central Kazakhstan).

Studies on thermal power plant areas with respect to chemical composition of particulate matter deposited in snow cover are limited. This study aims to monitor (2014–2022) particulate load and trace elements associated with the particulate matter distributed around (0.5-4.5 km) the coal-fired thermal power plant in Karaganda. In this study, snow cover was used as an effective scavenger of atmospheric pollutants. Using instrumental neutron activation analysis and atomic absorption spectrometry, the content of 26 elements and Hg, respectively, was determined in the particulate phase of snow. The results showed that particulate load varied from 26 to 1751, with mean of 427 and a background of 47 mg m-2 d-1. Anthropogenic impact caused a significant increase in content of U, Hg, Ta, Zn, Na, Cr, Co, Sr, Rb, Cs, Sc, Ca, Fe, Nd, Ba (2–30 times) in the samples compared to the background. Metal-bearing phases of Zn, Ba, As, U-Ta-Nb were detected through scanning electron microscope. The highest levels of particulate load (169–1032 mg m-2 d-1) and element contents in the samples were localized up to 0.7 km from the thermal power plant. The changes of particulate load and element composition of snow deposits during the monitoring period were connected with temperature, modernization of dust-collecting equipment, composition of coal and fly ash, long-range transport of emissions from other industries. The element content and metal-bearing phases in the particulate phase of snow can be used as markers for identifying emission sources from coal combustion.

Contribution of the carbon tax, phase-out of thermoelectric power plants, and renewable energy subsidies for the decarbonization of Chile − A CGE model and microsimulations approach

There are various climate policies to decarbonize the energy matrix of a country. In the case of Chile, a carbon tax of 5 USD/tCO2 was initially implemented, and later, a schedule was established for the phase-out of coal-fired thermoelectric plants, all the above in the absence of subsidies for non-conventional renewable energy (NCRE). This study uses a computable general equilibrium (CGE) model and microsimulations to assess the contribution of current climate policies and other more demanding scenarios that accelerate the decarbonization of the Chilean energy matrix, considering economic, environmental, and distributional impacts. Specifically, carbon taxes are simulated with and without complementary climate policies (phase-out of coal-fired power plants and NCRE subsidies). The results show that the scenarios that combine the three climate policies generate a greater decrease in greenhouse gas emissions (40.4% ∼ 57.5%). Besides, the drop in GDP is more pronounced when coal-fired thermoelectric plants phase out (0.3% additional), and NCRE subsidies contribute to moderately reducing emissions. However, NCRE subsidies reduce the negative effect on households’ expenditure and income, especially in the poorest quintile. Finally, microsimulations show marginal changes in income distribution and an increase of up to 0.4 percentage points in the poverty rate.

Social welfare and equality equilibrium based carbon tax subsidy incentive approach for biomass-coal co-firing towards carbon emissions

The lack of effective and scientifically supported policy measures has led to poor application of biomass-coal co-firing. A bi-level multi-objective model is developed to formulate a reasonable carbon tax subsidy policy and optimal biomass-coal co-firing plan, which considers the interactive relationship between authority and coal-fired power plants, and achieves a trade-off between social benefits, subsidy fairness, and environmental protection. A case study and scenarios demonstrate the feasibility and effectiveness of the proposed model. The ϵ-constraint method and Karush–Kuhn–Tucker conditions are employed to optimize the global equilibrium. The results indicate that model can achieve Stackelberg equilibrium between the hierarchical decision-makers with conflicting objectives, and the subsidy allocation is highly equitable. Sensitivity analyses show that the carbon tax subsidy policy can enhance biomass fuels utilization and encourage active participation of coal-fired power plants in achieving cleaner production. These findings provide a reference role for the authority to develop scientific subsidy mechanisms and coal-fired power plants to rationalize the planning of biomass-coal co-firing for power generation.

Quantifying particulate matter optical properties and flow rate in industrial stack plumes from the PRISMA hyperspectral imager

Abstract. Industrial activities such as metallurgy, coal and oil combustion, cement production, and petrochemistry release aerosol particles into the atmosphere. We propose analyzing the aerosol composition of plumes emitted by different industrial stacks using PRISMA (PRecursore IperSpettrale della Missione Applicativa) satellite hyperspectral observations. Three industrial sites have been observed: a coal-fired power plant in Matla, South Africa (imaged on 25 September 2021); a steel plant in Wuhan, China (24 March 2021); and gas flaring at an oil extraction site in Hassi Messaoud, Algeria (9 July 2021). Below-plume surface reflectances are constrained using a combination of PRISMA and Sentinel-2/MSI images. Radiative transfer simulations are performed for each scene including the surface, background atmosphere, and plume optical properties. The plume aerosol optical thickness (AOT), particle radius, volume of coarse-mode aerosol, and soot are then retrieved within the plumes following an optimal estimation framework. The mean plume retrieved AOT at 500 nm ranges between 0.27 and 1.27 and the median radius between 0.10 and 0.12 µm. We found a volume fraction of soot of 3.6 % and 10.4 % in the sinter plant and coal-fired plant plumes, respectively. The mass flow rate of particulate matter at a point source estimated by an integrated mass enhancement method varies from 840 ± 155 g s−1 for the flaring emission to 1348 ± 570 g s−1 at the coal-fired plant.

Techno-economic evaluation of CO2 capture and storage retrofit in decarbonizing different thermal power plants: A case study in China

Given that thermal power plants are the dominant mode of power generation in China, decarbonization from thermal power plants is significant to protect the global climate from further warming. CO2 capture and storage (CCS) is one of the most promising approaches for mitigating CO2 emissions; therefore, studies evaluating the effect of CCS retrofit on thermal power plants are urgently required. This study selected coal-fired power plant (CFPP) and natural gas combined cycle power plant (NGCC) as the representative technologies for thermal power plants, and proposed system models for their integrations with CCS. A comprehensive evaluation system was established using different metrics such as specific CO2 emission (CO2 emission per kWh), net electric efficiency, levelized cost of electricity (LCOE), and cost of avoiding CO2 emission (COAE). The detailed effects of fuel price fluctuations, technological advances, and different technology combinations on key metrics were analyzed, in order to propose policy recommendations for the decarbonization of China's thermal power plants using CCS technology. The following results were obtained: (1) The use of CCS to reduce CO2 emissions from thermal power plants will lead to a significant increase in LCOE. Each 100 g/kWh reduction in specific CO2 emission will result in 11 %–14.5 % increase in LCOE for CFPP + CCS, and 9.5 %–13.5 % increase for NGCC + CCS. (2) Technological advances toward reducing specific heat consumption for CO2 capture should be strongly promoted to reduce LCOE. Each 0.4 GJ/t reduction in specific heat consumption will result in an approximately 0.066 CNY/kWh reduction in LCOE for CFPP. (3) Both CFPP + CCS and NGCC + CCS exhibit potential for decreasing COAE below 600 CNY/t, although the technologies to meet this threshold are not currently realistic at higher fuel prices.

Emission characteristics and removal of heavy metals in flue gas: a case study in waste incineration and coal-fired power plants.

Heavy metal pollutants such as Hg, As, Pb, Cr, and Cd emitted from coal and waste combustion have received widespread attention. In this study, we systematically investigated the emission characteristics of heavy metals in waste incineration and coal-fired flue gases, focused on testing the removal effect of self-made cold electrode electrostatic precipitator (CE-ESP) on heavy metals in flue gas, and made a comparative analysis with the existing air pollution control devices (APCDs). Test results from waste incineration power plant showed that each APCD showed a certain effect on the removal of heavy metals in condensable particulate matter (CPM), with an average removal efficiency of bag filter was 86%, but its effect on Hg removal was slightly worse. Under the coupled field with electrified cold electrode plate operation mode, the average removal efficiency of CE-ESP on heavy metals in CPM was as high as 93%, including 76% for Hg. The removal efficiency of heavy metals (especially Hg) in CPM increased with the increase of flue gas temperature difference between inlet and outlet of CE-ESP. Test results from this coal-fired power plant showed that heavy metals were enriched in fly ash to a higher degree than in slag, the synergistic control of heavy metals in submicron particulate matter by the dust remover was not obvious, and there was a significant correlation between each heavy metal emission factor and its content in coal. Under the temperature field with non-electric cold electrode plate operation mode, the overall effect of CE-ESP on the removal of gaseous heavy metals was better than that of particulate heavy metals. Under the conventional electric field operation mode, CE-ESP was less effective in removing particulate Cr and gaseous Hg0. Under the coupled field with electrified cold electrode plate operation mode, the average removal efficiencies of CE-ESP for particulate and gaseous heavy metals were 82.37% and 76.16%, respectively.

Evaluation of radiological health risk caused by the use of fly ash in cement and concrete production and its storage

ABSTRACT As a result of firing pulverized coal in thermal power plants, enormous amounts of fly ash (FA) are produced as industrial waste. The release into the atmosphere and storage of this industrial waste remains one of the major environmental problems that threaten human health by contributing to air, water, and soil pollution. The recovery and reuse of FA in the construction industry is the only economic solution to the existing problem. In this study, the potential radiological risk caused by the usage of FA in concrete and cement production as a main component and its storage in landfill sites was evaluated for people and works by estimating radiological parameters (activity concentration and alpha index, annual effective doses, and the corresponding excess lifetime cancer risks) based on activity concentrations of terrestrial radionuclides in FA. Also, the radiological risk to the workers working in the FA landfill site was evaluated using the Residual Radioactivity Onsite 7.2 code. The average activity concentrations of terrestrial radionuclides in FA samples from the Tunçbilek lignite coal-fired thermal power plant at Kütahya province of Turkey were measured as 417, 156 and 454 Bq kg−1 for 226Ra, 232Th and 40K, respectively. When using up to 35% by mass of FA in cement and concrete, the average values of the radiological parameters revealed that they were within the recommended safety limits. However, code estimations showed that a regular worker in FA storage would be exposed to a total effective dose rate greater than 3 mSv y−1.

Effect of Fly Ash on the Mass Transfer Performance of CO2 Removal Using MEA and DEA Solutions in a Packed Tower

The accumulation of uncollected fly ash from flue gas in post-combustion CO2 capture processes is a significant concern in current coal-fired power plants due to its potential impact on the performance of CO2 absorbent and absorption towers. In order to determine the effect of fly ash on the mass transfer performance of CO2 absorption into monoethanolamine (MEA) and diethanolamine (DEA) aqueous solutions, experimental studies were carried out using a small-sized packed tower equipped with θ-ring random packing. These studies were conducted under various operating parameters, including solution temperature, liquid/gas ratio (L/G), packing height, and fly ash concentration. The results show that the effect of fly ash on the outlet CO2 concentration was primarily observed during the initial stages of the experimental process. Moreover, the presence of fly ash leads to a reduction in the volumetric overall mass transfer coefficient (KGav) when using MEA and DEA solution, and increasing the fly ash concentration further exacerbates this negative impact. However, the effect of fly ash on the reduction in KGav is not significantly related to its chemical composition but rather depends on the operational parameters. With increasing solution temperature, liquid/gas ratio (L/G), and packing height, the KGav values for different solutions exhibit an upward trend. The negative effect of fly ash on KGav remains relatively stable for MEA as solution temperature and packing height increase. Compared to MEA, fly ash has a greater negative effect on DEA solution under the same experimental conditions. The analysis reveals that the detrimental effect of fly ash on KGav primarily stems from its ability to alter the distribution state of the absorption liquid within the packed tower.

Significant spatial gradients in new particle formation frequency in Greece during summer

Abstract. Extensive continuous particle number size distribution measurements took place during two summers (2020 and 2021) at 11 sites in Greece for the investigation of the frequency and the spatial extent of new particle formation (NPF). The study area is characterized by high solar intensity and fast photochemistry and has moderate to low fine particulate matter levels during the summer. The average PM2.5 levels were relatively uniform across the examined sites. The NPF frequency during summer varied from close to zero in the southwestern parts of Greece to more than 60 % in the northern, central, and eastern regions. The mean particle growth rate for each station varied between 3.4 and 8 nm h−1, with an average rate of 5.7 nm h−1. At most of the sites there was no statistical difference in the condensation sink between NPF event and non-event days, while lower relative humidity was observed during the events. The high-NPF-frequency sites in the north and northeast were in close proximity to both coal-fired power plants (high emissions of SO2) and agricultural areas with some of the highest ammonia emissions in the country. The southern and western parts of Greece, where NPF was infrequent, were characterized by low ammonia emissions, while moderate levels of sulfuric acid were estimated (107 molec. cm−3) in the west. Although the emissions of biogenic volatile organic compounds were higher in western and southern sectors, they did not appear to lead to enhanced frequency of NPF. The infrequent events at these sites occurred when the air masses had spent a few hours over areas with agricultural activities and thus elevated ammonia emissions. Air masses arriving at the sites directly from the sea were not connected with atmospheric NPF. These results support the hypothesis that ammonia and/or amines limit new particle formation in the study area.

Health impact assessment of a proposed coal-fired power plant in Turkiye

ABSTRACT This paper presents the development process and key findings of the first-ever health impact assessment (HIA) conducted on the proposed Alpu coal-fired power plant (ACPP) in Eskisehir, Turkiye. The study followed a systematic HIA methodology, commencing with an extensive literature search on coal-fired power plants and the region’s specific characteristics during the screening step. In the subsequent scoping phase, in-depth discussions were conducted with a diverse range of experts and stakeholders to be used as inputs. The study findings highlight that the ACPP’s impact on human health will be multifaceted. In addition to the estimated additional 10,000 premature deaths attributed to air pollution during the 35-year, the ACPP is expected to have implications for occupational health, including increased occupational diseases and injuries. Furthermore, it may also affect income, employment, food access, and nutritional quality. The health implications of the ACPP will extend beyond Eskisehir, potentially affecting a region with a current population of approximately 11 million residents throughout its lifetime.

Design of a Level-3 electric vehicle charging station using a 1-MW solar system via the distributed maximum power point tracking technique

Abstract Solar power is mostly influenced by solar irradiation, weather conditions, solar array mismatches and partial shading conditions. Therefore, before installing solar arrays, it is necessary to simulate and determine the possible power generated. Maximum power point tracking is needed in order to make sure that, at any time, the maximum power will be extracted from the photovoltaic system. However, maximum power point tracking is not a suitable solution for mismatches and partial shading conditions. To overcome the drawbacks of maximum power point tracking due to mismatches and shadows, distributed maximum power point tracking is utilized in this paper. The solar farm can be distributed in different ways, including one DC–DC converter per group of modules or per module. In this paper, distributed maximum power point tracking per module is implemented, which has the highest efficiency. This technology is applied to electric vehicles (EVs) that can be charged with a Level 3 charging station in <1 hour. However, the problem is that charging an EV in <1 hour puts a lot of stress on the power grid, and there is not always enough peak power reserve in the existing power grid to charge EVs at that rate. Therefore, a Level 3 (fast DC) EV charging station using a solar farm by implementing distributed maximum power point tracking is utilized to address this issue. Finally, the simulation result is reported using MATLAB®, LTSPICE and the System Advisor Model. Simulation results show that the proposed 1-MW solar system will provide 5 MWh of power each day, which is enough to fully charge ~120 EVs each day. Additionally, the use of the proposed photovoltaic system benefits the environment by removing a huge amount of greenhouse gases and hazardous pollutants. For example, instead of supplying EVs with power from coal-fired power plants, 1989 pounds of CO2 will be eliminated from the air per hour.

“Waste to energy” as a driver towards a sustainable and circular energy future for the Balkan countries

BackgroundThe main goal of the paper is to review the existing state and propose a model solution for the introduction of the waste-to-energy concept in the Republic of Serbia and Bosnia and Herzegovina, as these Balkan countries are a source of high pollution due to the inefficient use of fossil fuels and the operation of coal-fired power plants. Besides, these countries have very low level of waste management, which results in the uncontrolled disposal of a large amount of waste which consists of plastic and microplastic materials which are difficult to decompose in natural ecosystems.MethodsConsidering the type and objectives of the study, a mixed research method was chosen as a combination of exploratory research, descriptive research, explanatory research, and modeling.ResultsThe main result of the research shows the unfavorable situation in the field of waste management in the Republic of Serbia, as well as in Bosnia and Herzegovina. Both countries have adopted adequate strategies and plans, but waste management is not implemented accordingly, Nevertheless, numerous problems create considerable opportunities for improvement, especially regarding the potential for energy production from waste, which is an important approach to implementing the circular economy model. The study showed that the situation is particularly unfavorable in rural areas. Hence, the research proposes (a) a novel model for waste-to-energy governance and (b) a novel model for waste-to-energy management in rural areas. The research was done, and models were developed based on the examples of the Republic of Serbia, and Bosnia and Herzegovina. However, the results can be used in countries with a similar level of waste management and with a larger share of rural areas.ConclusionsThe paper emphasizes the importance of a holistic and systemic approach to waste management, with emphasis on using waste-to-energy concept as particularly applicable in the transition to circular economy. This study proposes a model for the integration of waste management (with emphasis on plastic and microplastic) and energy efficiency, presenting a model of approach that can be used in countries that are at the beginning of introducing a circular economy.

The distribution and enrichment characteristics of rare earth elements between coals and coal ashes from four coal-fired power plants.

Coal and coal ash (slag and fly ash) have emerged as important potential sources for rare earth elements (REY). The distribution and enrichment of REY during coal combustion from coal-fired power plants are of great significance for the recovery of REY. In this study, the concentration of REY in coal and coal ash from four coal-fired power plants in China was determined using microwave digestion-inductively coupled plasma mass spectrometry. The distribution and enrichment characteristics of REY in coal and coal ash were studied. The coal ash contains 310-683 μg g-1 of REY, and the proportion of critical REY was greater than 30%, which is higher than the extraction concentration (300 μg g-1) recommended by the United States Department of Energy, indicating significant REY recovery potential. The concentration of REY in coal was positively correlated with ash yield, which could be explained by the fact that REY are mainly distributed in minerals. Coal and coal ash show similar REY distribution patterns, indicating that REY were not fractionated during the coal combustion. In addition, the enrichment coefficient of REY in fly ash was greater than that in slag, which revealed that REY were mainly enriched in fly ash. Therefore, the REY in fly ash has more recycling potential.

Comprehensive Environmental and Economic Assessment of Low-Carbon Energy Sources

The article presents the results of a study of various low-carbon energy sources based on a multi-criteria analysis for the purpose of a comprehensive environmental and economic assessment of the effectiveness of their use. The peculiarity of the study is that it analyzed both renewable energy sources and traditional fossil fuel based ones using innovative technologies for carbon dioxide capture and storage, as well as nuclear energy. The purpose of this work is to conduct a comprehensive assessment based on three criteria: normalized cost of electricity LCOE (Levelized Cost of Energy)/LEC (Levelized Energy Cost), specific value of carbon dioxide emissions and material intensity expressed in total MI (Material Input) numbers. The hypothesis of the study is as follows: the introduction of the criterion of material intensity in MI numbers into a comprehensive assessment will allow one to identify low-carbon energy sources with the greatest ecological and economic effect. As a result, it was found that in 2023, the global energy capacity of low-carbon energy sources reached 51.8%, but the share of energy produced by them is significantly lower, amounting to only 39.4%. The multi-criteria analysis made it possible to identify low-carbon energy sources that, at the lowest cost, provide the greatest reduction in carbon dioxide emissions, and at the same time reduce the overall environmental impact by reducing the disturbance of biospheric material flows. Wind farms have high ecological and economic efficiency, while solar energy sources and bioelectric power plants – slightly less so. Geothermal and hydroelectric power plants have a low normalized cost of electricity, but they have relatively high values of material intensity. The environmental and economic efficiency of nuclear power is higher than that of gas and coal-fired power plants using carbon dioxide capture technologies; it occupies an intermediate position between renewable and traditional energy sources. An unexpected established fact is that gas and coal-fired power plants with carbon dioxide capture technologies have the same environmental and economic efficiency. The results obtained can be useful in making decisions about the possibility of prioritizing the development of individual low-carbon energy sources.

Ash conveying system upgrade from hydraulic to pneumatic system in a 550MW coal-fired power plant in Taiwan

The paper presents a comprehensive study on the ash handling system upgrade from a hydraulic conveying system to a pneumatic system in a 550 MW coal-fired power plant located in Taiwan. The ash pond used to dispose of ash from the economizer and air preheater is almost full due to having been in service for more than forty years. An alternative location to dispose of the ash is sought. The design process of finding the new location and the equipment to be used is explored. Some options for the new economizer and air preheater ash disposal site, including building a new silo or using an existing silo, are taken into consideration in terms of design, cost, and timing of execution. The project’s execution procedure is reviewed, taking into account aspects of system integration, equipment installation, and commissioning. The primary objective of this paper is to detail the design, implementation, and outcomes of the ash handling system upgrade. This upgrade is accomplished in an effort to enhance operational efficiency, reduce maintenance requirements, and improve environmental compliance. The study explores the motivations behind adopting pneumatic conveying technology, focusing on its advantages over hydraulic systems, such as reduced maintenance needs and improved dust control. The case study provides insight into the lesson learned and recommendations for similar ash conveying system upgrades in other coal-fired power plants.

Exploring the Carbon Pricing Strategy to Decarbonizing Coal-Fired Power Plants: A System Thinking Approach

Carbon dioxide is an important component and one of the contributors to greenhouse gas emissions. Taiwan has set new goals to reduce emissions by 23%-25% in 2030. However, electricity production in 2021 is still contributed by coal-fired power plants. This research explores potential carbon pricing strategies to decarbonize coal-fired power plants, which are carbon fees and carbon emission trading. This research uses a system dynamics framework for causal loop diagram development. This research creates a causal loop diagram to describe the carbon pricing strategy's impact on reducing carbon emissions.

The health Loss Distribution of Coal-fired Power Plants and the relationship to Air Pollution Charges

In this study, the regional health loss due to the air pollution of a coal-fired power plant is analyzed by using the atmospheric dispersion model. AERMOD was used to simulate the increment concentration map of point source emission, and the GIS geographic information system was used to displace the distribution of air pollution concentration and regional health loss in grid receptors. The data of the continuous automatic monitoring facilities and the source of pollution sources were analyzed. Moreover, the effects of emissions, seasons, population, and distance on the simulated concentration were evaluated. The various influencing factors of air pollution concentration were evaluated.the R2 value of the empty product prediction map in summer has a better correlation with the concentration from monitor station, between 0.38 and 0.83, and the sulphur dioxide correlation has the best R2 value of 0.83. AERMOD was used to combined with pollutant emissions, weather, and terrain data, to simulate the distribution of rising concentration values due to coal-fired power plant emissions within the research area, and the study used the simulated rising concentration values to calculate the health loss. [1] The study used health loss of 25,647,291,161 NTD/year and medical loss of 319,153,198 NTD/year.

An Investigation of Selective Catalytic Reduction Catalyst SO2/SO3 Conversion in Coal-fired Power Plants

An Investigation of Selective Catalytic Reduction Catalyst SO2/SO3 Conversion in Coal-fired Power Plants

Influence of Reaction Parameters on Solid Outputs in CO2 Mineralization of Desulfurized Gypsum

Flue gas desulfurization gypsum is the main solid byproduct generated during the limestonegypsum wet desulfurization process in coal-fired power plants. This byproduct is produced in large quantities annually, and ineffective management or disposal can lead to significant environmental damage and land resource wastage. This study investigates how reaction conditions affect CO2 mineralization of desulfurization gypsum, focusing on the purity of the resultant solid minerals, the rate of carbonation of CaSO4·2H2O, and the proportion of vaterite in the produced calcium carbonate. The experimental findings suggest that an increase in ammonia solution concentration enhances the purity and carbonation rate of calcium carbonate from CaSO4·2H2O. Additionally, a higher CO2 flow rate speeds up the mineralization process but may decrease CO2 capture efficiency; however, an optimal increase in CO2 flow can reduce the Ca2+ to CO32- ratio, facilitating the formation of vaterite calcium carbonate. The solid-to-liquid ratio in the reaction does not generally impact the purity or carbonation rate of calcium carbonate but increasing this ratio leads to higher supersaturation of the solution, slowing the conversion of vaterite to calcite and increasing the vaterite content. However, this effect diminishes past a certain point. This research serves as a basis for refining the direct mineralization conditions for CO2 in desulfurization gypsum processes, aiming to optimize the conditions for producing high-quality vaterite-type calcium carbonate.

Formation Pathways and Emission Characteristics of PCDD/Fs during Co-combustion Tests of Sewage Sludge in Coal-fired Power Plants

Formation Pathways and Emission Characteristics of PCDD/Fs during Co-combustion Tests of Sewage Sludge in Coal-fired Power Plants