Photocatalytic CO2 Reduction Research Articles

Multi-species defect engineering synergistic localized surface plasmon resonance boosting photocatalytic CO2 reduction

Inadequate charge carrier kinetics and a scarcity of active sites still challenge photocatalytic CO2 reduction reaction (CO2RR). We exploit the synergy between multi-species defect engineering and the localized surface plasmon resonance (LSPR) effect in Bi/BiV1-mO4-m to address these limitations. Theoretical calculations show that V and O defects collectively modulate the work function of BiVO4, which induces hot electrons to transfer from Bi nanoparticles to BiV1-mO4-m. These electrons are then captured by O defects, confirmed by femtosecond transient absorption spectroscopy. Electron density is significantly increased at the O defects, enhancing CO2 adsorption and establishing it as a new reaction site. Bi/BiV1-mO4-m achieves photocatalytic CO2RR in pure water; Bi/BiV1-mO4-m achieves direct solar-driven photocatalytic CO2RR with a CO yield of 501 μmol/g/h under concentrated sunlight.

Constructing functionalized carbon quantum dots on amino-rich graphitic carbon nitride to enhance CO2 photocatalytic reduction: Critical role of functional group modulation

Carbon quantum dots (CQDs) decoration have been widely acknowledged as promising strategy in photocatalysis, yet in-depth understanding of the effect of different functionalized CQDs on CO2 photocatalytic reduction is still lacked. Herein, three kinds of functionalized CQDs, i.e. carboxylic CQDs (CCQDs), amino CQDs (NCQDs) and sulfonated CQDs (SCQDs), were homogeneously anchored on amino-rich g-C3N4 (U1W1-CN) to investigate their CO2 reduction behaviors under simulated solar-light illumination. Structural analysis demonstrated that potential amide covalent bonds formed between U1W1-CN and CCQDs, and noncovalent conjugations might exist between U1W1-CN and SCQDs, while strong electrostatic attraction between U1W1-CN and NCQDs. Performance tests showed CQDs decoration greatly enhanced the CO2 reduction activity, with 7%CCQDs/U1W1-CN exhibiting the optimal CO and CH4 productions of 40.94 μmol g−1 and 2.2 μmol g−1 under 4 h light irradiation, markedly higher than those of 7%SCQDs/U1W1-CN and 7%NCQDs/U1W1-CN. After comprehensive analysis, it was found that CCQDs decoration endowed U1W1-CN with better CO2 adsorption and activation. And due to the potential amide covalent bonds formed between CCQDs and U1W1-CN, 7%CCQDs/U1W1-CN delivered the largest electron density and most abundant COOH– intermediates, contributing much to its superior CO2 reduction activity over 7%NCQDs/U1W1-CN and 7%SCQDs/U1W1-CN. It is expected that the critical role of functional group modulation on CQDs in enhancing CO2 photocatalytic reduction revealed in this work can provide valuable insights into the rational design of more advanced photocatalysts for targeted reactions.

Sulfur-doped Bi2O2CO3 nanosheet for enhanced visible-light-driven photocatalytic CO2 reduction to CO with ultra-high selectivity.

The photocatalytic reduction of carbon dioxide (CO2) has emerged as a compelling strategy for the conversion of renewable energy. However, the expeditious recombination of photogenerated charge carriers and the inadequate light absorption capabilities are currently predominant challenges. Herein, we developed a facile hydrothermal approach to synthesize a sulfur doped Bi2O2CO3 nanosheet with a tunable energy band structure designed to enhance visible light absorption. Our findings indicate that the incorporation of sulfur into the catalytic sites induces an electron sink effect, significantly improving the separation efficiency of photogenerated charge carriers. Consequently, this sulfur-doped Bi2O2CO3 catalyst exhibits a remarkable carbon monoxide (CO) yield of 16.64 μmol gcat-1 h-1 with nearly 100 % selectivity under illumination ranging from 420 to 780 nm. Through in-situ characterization techniques and theoretical calculations, it was revealed that sulfur-coordinated bismuth sites greatly enhance CO2 adsorption and decrease the energy barrier for critical intermediates formation (*COOH), thus selectively driving the reaction towards CO production. This work not only advances our understanding of mechanisms underlying photocatalytic reduction of CO2 on sulfur-doped bismuth-based catalysts but also sets a precedent for developing sophisticated photocatalytic systems for enhanced photoreduction reactions.

Studying the productivity of sewage sludge (SS) components for photocatalytic CO2 transformation to CO and methane

AbstractEnergy-efficient photocatalytic CO2 conversion to sustainable solar fuels is a promising approach for simultaneously resolving energy and environmental concerns. The increased growth of sewage sludge necessitates research and innovation to propose more commercially viable options for lowering the socioeconomic and environmental complications associated with its current treatment. Sewage sludge can be applied to valuable products or used as a feedstock for energy production. According to the characterization results, the sewage sludge contains several metallic oxides (M), including Ni, Al, Mn, and Cu, and semiconductors (Fe2O3 and ZnO). According to the proposed mechanism, ZnO acts as an electron conductor between the Fe2O3 and the active sewage sludge due to forming an n–n type heterojunction. Under visible-light irradiation, photocatalytic CO2 reduction of sewage sludge was investigated using a fixed bed reactor. The CO2 reduction produced CO and CH4, with production rates of 9.76 and 4.20 µmol g−1 h−1, respectively, via the electrical conductivity in the sewage sludge elements. Furthermore, the impacts of photocatalyst loading, system reforming, light effect and pressure range were examined, where the methane yield at 0.1 g was 4.23 and 2.26 times significantly higher than at 0.05 and 0.2 g, correspondingly. With catalyst loadings of 0.1 and 0.2 g, the mono-oxide productivity was 1.69 and 2.58, notably greater, respectively. Moreover, the best yield of the CO and methane was obtained by using 0.3 bar as pressure and 10% methanol in H2O/CO2 as a reducing agent. Finally, using sewage sludge to produce a solar fuel based on the presence of active metallic oxide and semi-conductor heterojunctions provides novel insights from molecular and engineering perspectives into converting CO2 to a green fuel using wastewater sludge. Graphical abstract

Well-designed V2AlC MAX supported g-C3N4/TiO2 Z-scheme heterojunction for photocatalytic CO2 reduction through bi-reforming to produce CO and CH4

Well-designed V2AlC MAX supported g-C3N4/TiO2 Z-scheme heterojunction was synthesized and tested for photocatalytic CO2 reduction through bi-reforming under UV and visible light in batch and continuous photoreactors. Compared to V2AlC/g-C3N4, V2AlC/TiO2 produced 2.17 times more CO and 6.40 times more CH4, along with H2. The highest CO production of 14644 μmol g−1 h−1 was obtained over V2AlC-g-C3N4/TiO2 composite at a selectivity of 20.21 %. Similarly, CH4 and H2 production of 56567 and 1253 μmol g−1 h−1 was obtained, which were 11.11 and 169.9 folds higher for CH4 and 2.77 and 2.32 folds higher for H2 production compared to using g-C3N4/TiO2 and V2AlC/TiO2, respectively. The efficient generation and separation of charge carriers were achieved by the Z-scheme heterojunction of g-C3N4/TiO2 with V2AlC MAX cocatalysts, which led to a greatly increased photocatalytic activity. Using a continuous process, the production of CO was decreased by 1.12 folds, whereas the production of methane disappeared and the reaction pathway was the conversion of CO2 to CO. Using methanol with UV light resulted in higher production of protons and hydrogen, achieving the highest quantum efficiency. The stability study further confirmed the continuous evolution of CO, CH4, and H2 over four cycles.

Metal Center-Tuned Photocatalytic Carbon Dioxide Reduction for Frameworks with the Tetraphenylethene-Imidazole Ligand.

As heterogeneous photocatalysts that can effectively transform CO2 to CO, two MOFs with different metal centers, namely, [M(tipe)(H2O)2](ClO4)2·solvent (M = Ni named as Ni-MOF and M = Co referred to as Co-MOF), were synthesized by reactions of 1,1,2,2-tetrakis(4-(imidazole-1-yl)phenyl)ethene (tipe) with the corresponding metal perchlorate. Both Ni-MOF and Co-MOF have 3D structures, in which the metal centers have the same coordination environment with the N4O2 donor set. Driven by visible light, the CO production catalyzed by Co-MOF is 6734.1 μmol g-1 with 45.3% selectivity, and in contrast, Ni-MOF has 4601.3 μmol g-1 CO production with 97.6% selectivity in 5 h. Through photoelectrochemical characterization, DFT calculations, and in situ FT-IR measurements, the photocatalytic CO2 reduction process catalyzed by Ni-MOF and Co-MOF was investigated. The results show that the metal center of the MOF is crucial for photocatalytic CO2 reduction. This work offers an innovative approach for controlling the performance of photocatalytic CO2 reduction through tuning the metal centers of architectures.

Exchange of CO2 with CO as Reactant Switches Selectivity in Photoreduction on Co–ZrO2 from C1–3 Paraffin to Small Olefins

Photocatalytic reduction of CO2 into C2,3 hydrocarbons completes a C‐neutral cycle. The reaction pathways of photocatalytic generation of C2,3 paraffin and C2H4 from CO2 are mostly unclear. Herein, a Co0–ZrO2 photocatalyst converted CO2 into C1–3 paraffin, while selectively converting CO into C2H4 and C3H6 (6.0 ± 0.6 μmol h−1 gcat−1, 70 mol%) only under UV–visible light. The photocatalytic cycle was conducted under 13CO and H2, with subsequent evacuation and flushing with CO. This iterative process led to an increase in the population of C2H4 and C3H6 increased up to 61–87 mol%, attributed to the accumulation of CH2 species at the interface between Co0 nanoparticles and the ZrO2 surface. CO2 adsorbed onto the O vacancies of the ZrO2 surface, with resulting COH species undergoing hydrogenation on the Co0 surface to yield C1–3 paraffin using either H2 or H2O (g, l) as the reductant. In contrast, CO adsorbed on the Co0 surface, converted to HCOH species, and then split into CH and OH species at the Co and O vacancy sites on ZrO2, respectively. This comprehensive study elucidates intricate photocatalytic pathways governing the transformation of CO2 into paraffin and CO to olefins.

Exchange of CO2 with CO as Reactant Switches Selectivity in Photoreduction on Co-ZrO2 from C1-3 Paraffin to Small Olefins.

Photocatalytic reduction of CO2 into C2,3 hydrocarbons completes a C-neutral cycle. The reaction pathways of photocatalytic generation of C2,3 paraffin and C2H4 from CO2 are mostly unclear. Herein, a Co0-ZrO2 photocatalyst converted CO2 into C1-3 paraffin, while selectively converting CO into C2H4 and C3H6 (6.0±0.6 μmol h-1 gcat -1, 70 mol %) only under UV/Visible light. The photocatalytic cycle was conducted under 13CO and H2, with subsequent evacuation and flushing with CO. This iterative process led to an increase in the population of C2H4 and C3H6 up to 61-87 mol %, attributed to the accumulation of CH2 species at the interface between Co0 nanoparticles and the ZrO2 surface. CO2 adsorbed onto the O vacancies of the ZrO2 surface, with resulting COH species undergoing hydrogenation on the Co0 surface to yield C1-3 paraffin using either H2 or H2O (g, l) as the reductant. In contrast, CO adsorbed on the Co0 surface, converted to HCOH species, and then split into CH and OH species at the Co and O vacancy sites on ZrO2, respectively. This comprehensive study elucidates intricate photocatalytic pathways governing the transformation of CO2 into paraffin and CO to olefins.

An Efficient Strategy for Tailoring Interfacial Charge Transfer Pathway on Semiconductor Photocatalysts: A Case of (BiFeO3)x(SrTiO3)1−x/Mn3O4

AbstractThe ability to generate heterostructures with a desirable charge transfer pathway is essential for achieving semiconductor photocatalysts with super photocatalytic activity. Herein, it is proposed to realize robust tailoring of effective charge transfer pathway in semiconductor‐based heterostructures via work function regulation, and elucidate the influence of the work function of the semiconductor on the charge transfer mechanism at the heterostructure interface. Specifically, taking type‐II heterostructure SrTiO3/Mn3O4 as an example, introducing BiFeO3 into SrTiO3 effectively regulate the work function of the (BiFeO3)x(SrTiO3)1−x/Mn3O4 (BxT1−x/Mn3O4) solid solution through optimizing the x value. Combined with in situ testing, the results show that the original type‐II heterojunction SrTiO3/Mn3O4 is converted into S‐scheme heterojunction (BiFeO3)0.3(SrTiO3)0.7/Mn3O4 when BiFeO3 is introduced. This increases the work function of the semiconductor, inducing the light‐generated carriers to be guided and separated by the generated built‐in electric field. Therefore, the implementation of this strategy can achieve efficient photocatalytic CO2 reduction. In contrast to pristine SrTiO3/Mn3O4, the (BiFeO3)0.3(SrTiO3)0.7/Mn3O4 heterostructure exhibits a 28‐fold enhancement of in electron consumption rate during photocatalytic CO2 reduction, and the reaction mechanism is suggested. In this study, a strategy for effectively converting interfacial charge transfer pathways in semiconductor photocatalysts is developed to enhance the photoconversion kinetics of CO2 and H2O.

Self‐Confined Construction of Facet Heterojunction with Tunable Band Alignment for Enhanced Photocatalytic CO2 Reduction

AbstractAlthough crystal facet engineering is extensively studied in energy and environmental technologies, the in‐depth understanding of intrinsic mechanisms governing crystal facet heterojunctions in tuning band alignments is still limited. Here, novel Bi5O7NO3 crystals exposing tailor {080} facets are synthesized via NH4+‐assisted self‐confined construction. It has been confirmed that NH4+ ions selectively adsorb on the {141} facets, inversely inducing the growth of desired {080} crystal facets, while the tailored {080} facets facilitate the generation of oxygen vacancies. The controllable concentration of oxygen vacancies, influenced by different exposed facets, can optimize the relative positions of Fermi levels and shift the photoelectron transfer route between the {141} and {080}‐OV facets from type‐II to S‐scheme, thus triggering rapid charge transport channels and effectively suppressing electron‐hole recombination. DFT calculation verifies that the energy barrier for the *COOH formation on Bi5O7NO3‐{080}‐OV is the lowest, thereby promoting the generation of CO. The well‐designed Bi5O7NO3 crystals with the optimal {080}/{141} facet ratio exhibit a 3.8‐fold enhancement in photocatalytic CO2 reduction, compared to traditional Bi5O7NO3 dominated by the {141} facets. This work offers new insights into the regulation of band alignments at heterointerfaces and the design of high‐efficiency photocatalysts.

Decorating nitrogen-deficient crystalline g-C3N4 with Ti3C2(OH)2 for photocatalytic CO2 reduction and RhB degradation enhancement

Visible light responding photocatalytic technology has shown great potential to mitigate the greenhouse effect and global pollution issues in recent years. Herein, alkalized titanium carbide Ti3C2Tx (TCOH) is combined with nitrogen-deficient g-C3N4 (CN-Nx) by simply mixing for photocatalytic CO2 reduction and RhB degradation. TCOH replaces noble metals as a co-catalyst for CN-Nx due to its full-spectrum absorption properties and excellent conductivity, which effectively enhances the overall light absorption capacity of CN-Nx. Additionally, a large Fermi energy level difference between TCOH and CN-Nx leads to a built-in electric field forming at their interface when combined. This built-in electric field can enhance the photogenerated electron-hole pair separation and reduce the recombination rate. So the visible light utilization ranges of optimized 2TCOH-30 %/CN-N0.02 expanded from 477 nm (CN-N0.02) to 481 nm, and the average lifetimes of the photogenerated carriers is 4.37 ns, which is 2.64 times longer than CN-N0.02. Moreover, the CO yield reaches 67.55 μmol/g during photocatalytic CO2 reduction of 2TCOH-30 %/CN-N0.02, which is 4.06 and 2.54 times than 2TCOH and CN-N0.02. During the RhB degradation, 2TCOH-30 %/CN-N0.02 can remove approximately 98.3 % of RhB in 15 min, which is1.6 and 1.4 times of 2TCOH and CN-N0.02. Also, 2TCOH-30 %/CN-N0.02 shows excellent stability, the photocatalytic capacity for CO2 reduction and RhB degradation has no significant degradation after six times circles.

In-situ construction of Bi-MOF-derived S-scheme BiOBr/CdIn2S4 heterojunction with rich oxygen vacancy for selective photocatalytic CO2 reduction using water

In this study, a highly selective MOF-BiOBr/CdIn2S4 (MOF-BiOBr/CIS) heterostructure with CdIn2S4 nanosheets grown in situ on the tubular structure derived from Bi-MOF-based BiOBr was successfully constructed using a hydrothermal method. Under simulated solar light without sacrificial or photosensitizing agents, the 20-MOF-BiOBr/CIS composite exhibited excellent photocatalytic CO2 performance, achieving production rates of 30.18 μmol‧g−1‧h−1 for CO and 1.50 μmol‧g−1‧h−1 for CH4. Compared to pure MOF-BiOBr and CdIn2S4, the CO production rates were increased by approximately 9 and 116 times, respectively. It was revealed that the 20-MOF-BiOBr/CIS composite with rich oxygen vacancy exhibited close interfacial contact and efficient charge transfer. The formation of MOF-BiOBr/CdIn2S4 heterojunction thereby provided efficient CO2 photocatalytic reduction. The CO selectivity of 20-MOF-BiOBr/CIS reached 83.4 %, and the MOF-BiOBr/CIS heterojunction exhibited good stability over multiple cycles. Furthermore, a mechanism for enhanced photocatalytic CO2 reduction by the MOF-BiOBr/CIS heterojunction was also proposed.

Constructing type II heterojunction of 2D/1D Pg-C3N4/Ag3VO4 nanocomposite with high interfacial charge separation for boosting photocatalytic CO2 reduction under solar energy

The well-designed, template-free synthesis of 2D protonated g-C3N4 nanosheets (Pg-C3N4) coupled with novel 1D Ag3VO4 nanorods has been investigated to construct 2D/1D interface heterostructures with strong electrostatic interactions between the positively charged 2D Pg-C3N4 nanosheets and the negatively charged 1D Ag3VO4 nanorods. The coupling of Pg-C3N4 and Ag3VO4 with desirable characteristics resulted in a 2D/1D interface heterojunction with a type II charge carrier transfer mechanism, effectively maintaining and utilizing charge carriers. The 2D/1D Pg-C3N4/Ag3VO4 exhibited remarkable photocatalytic performance for CO2 conversion with H2O, resulting in maximum CH4 and dimethyl ether (DME) production of 352.3 and 130.9 µmol/g-cat, respectively. A quantum yield of 0.23 % for CH4 generation was achieved over the 2D/1D Pg-C3N4/Ag3VO4, which was 2.9 and 1.4 times higher than that of the Pg-C3N4 and Ag3VO4 samples, respectively. The improvement in photocatalytic performance primarily stems from the effective interaction between Pg-C3N4 and ternary Ag3VO4, leading to enhanced transfer and separation of photoinduced charge carriers through the creation of a type II heterojunction. The findings of this study are useful in designing template-free heterojunctions for photocatalytic CO2 conversion and other solar energy applications.

Microenvironment modulation of Fe-porphyrinic metal–organic frameworks for CO2 photoreduction

Photocatalytic CO2 reduction to fuels and chemicals is a promising pathway towards carbon resource recovery. Herein, three isomorphic Fe-porphyrinic MOFs, Zr6O4(OH)4(Fe-TCPP)3 (MOF-525, Fe-TCPP = iron 5,10,15,20-tetra(4-carboxyphenyl)-porphyrin), Zr6O4(OH)4(Fe-TCPP-NO2)3 (MOF-525-NO2, Fe-TCPP-NO2 = iron 5,10,15,20-tetra(2-nitro-4-carboxyphenyl)-porphyrin), and Zr6O4(OH)4(Fe-TCBPP-NO2)3 (MOF-526-NO2, Fe-TCBPP-NO2 = iron 5,10,15,20-tetra[4-(4′-carboxyphenyl)-2-nitrophenyl]-porphyrin) were synthesized and employed as photocatalysts for CO2 reduction. Among them, MOF-525-NO2 exhibited the highest catalytic activity with CO and H2 yields of 10.36 and 0.46 mmol·g−1 without any photosensitizer under visible light. Mechanism investigations suggested that the micro-environments of these MOFs were adjusted by introducing porphyrinic fragments with different lengths and functional groups, resulting in stronger CO2 affinity, faster photocurrent response, and efficient photogenerated electron-hole separation and transfer, which finally promoted the efficiency for photocatalytic CO2 reduction.

Ru Single Atom Dispersed Cu Nanoparticle with Dual Sites Enables Outstanding Photocatalytic CO2 Reduction.

Cu-based catalysts are promising candidates for CO2 reduction owing to the favorable energetics of Cu sites for CO2 adsorption and transformation. However, CO2 reduction involving insurmountable activation barriers and various byproducts remains a significant challenge to achieve high activity and selectivity. Herein, a photocatalyst constructed with single-Ru-site-on-Cu-nanoparticle on Bi4Ti3O12 exhibits exceptional activity and selectivity for CO2 conversion to CO. The experimental and theoretical results consistently reveal that the Ru-Cu dual sites allow the rapid transfer of photogenerated carriers for closely interacting with CO2 molecules. Importantly, the Ru-Cu dual sites exhibit extremely strong CO2 adsorption ability, and the Gibbs free energy of the rate-determining step (*CO2 to *COOH) has been significantly reduced, synergistically enhancing the entire CO2 conversion process. The optimal BTOCu2Ru0.5 photocatalyst manifests a high performance for selective reduction of CO2 to CO, yielding 10.84 μmol over 15 mg of photocatalyst in 4 h (180.67 μmol·g-1·h-1) under a 300 W Xe lamp without any photosensitizer and sacrificial reagent, outperforming all bismuth-based materials and being one of the best photocatalysts ever reported under similar reaction conditions. This work presents a strategy for the rational design of multiple metal sites toward efficient photocatalytic reduction of CO2.

Confinement Synthesis of Atomic Copper-Anchored Polymeric Carbon Nitride in Crystalline UiO-66-NH2 for High-Performance CO2-to-CH3OH Photocatalysis.

Photocatalytic CO2 reduction to value-added fuels displays an attractive scenario to enhance energy supply and reduce global warming. We report herein the confinement synthesis of polymeric carbon nitride (PCN) incorporating with Cu single atoms (CuSAs) inside the crystalline UiO-66-NH2, which combines the merits of heterojunction photocatalysis and single-atom catalysis (SAC) to achieve high-performance CO2-to-CH3OH conversion. A series of spectral studies displays the formation of CuSAs@PCN inside the crystalline UiO-66-NH2. Remarkably, the ternary composite shows an excellent photocatalytic turnover frequency of 4.15 mmol ⋅ h-1 ⋅ g-1 for CO2-to-CH3OH conversion. Theoretical and experimental studies demonstrate the doping of CuSAs, as well as the formation of type-II heterojunction, are causal factors to achieve CH3OH generation. The study provides new insights designing high-performance photocatalyst for CO2 conversion to fuels at atomic scale.

Disentangling the efficient photocatalytic reduction of CO2 by a stable UiO-66-NH2/Cs2AgBiBr6 catalyst

The compelling global warming crisis as well as extraterrestrial artificial light synthesis craves photocatalytic reduction of CO2 into fuels and value-added chemicals, for which efficient and robust catalysts with high selectivity and conversion rate is a prerequisite but hitherto a rarity. Herein we create a lead-free double metal perovskite of Cs2AgBiBr6, coupling with mesoporous/microporous UiO-66-NH2 MOF to form type-II heterojunctions for efficient photocatalytic reduction of CO2 with a high CO selectivity of 95 % at an electron consumption rate of 33 μmol g−1 h−1 (13.4 μmol g−1 h−1 for CO and 0.72 μmol g−1 h−1 for CH4). Multilayered mesoporous MOF particles manifest higher catalytic activity than their microporous counterparts due to the highly open mesoporous channels and larger pore volume of the former. Femtosecond transient absorption in combination with in situ infrared spectroscopic measurements disentangle the underlying mechanism accounting for the high product selectivity: the ultrafast electron transfer of 12.3 ps from Cs2AgBiBr6 to UiO-66-NH2-2 enables efficient charge separation; primary *COOH intermediates and rapid CO desorption from Bi-based photocatalyst lead to dominant CO product. Moreover, the MOF crystals maintain stability after γ-rays irradiation equivalent of over 45-year accumulation in a typical earth orbit, hinting their promising potential in extraterrestrial artificial light synthesis.

Coupling monoclinic Pb2(CrO4)O with Mn3O4 quantum dots as oxygen vacancies-rich S-scheme photocatalysts for visible-light-driven photocatalytic CO2 reduction with H2O

Simulating natural photosynthesis to convert CO2 and H2O into fuels achieving overall reaction is a promising solution for addressing environmental problems and energy crises. Constructing an S-scheme catalyst of two or more catalytic sites with rapid electron transfer and strong redox capability may be an effective strategy for coupling photocatalytic CO2 reduction and H2O oxidation. Here, an oxygen vacancies-rich S-scheme semiconductor photocatalyst composed of monoclinic lead chromate oxide (Pb2(CrO4)O) coupled with Mn3O4 quantum dots (QDs) (Pb2(CrO4)O@Mn3O4QDs) are synthesized and tested for photoconversion of CO2 with H2O under visible light. Through the integration of Pb2(CrO4)O with Mn3O4QDs, the photocatalytic C1-evolution rate on Pb2(CrO4)O@Mn3O4QDs is radically increased by 6.0 and 8.1 times, which is much faster than that of pristine Pb2(CrO4)O and Mn3O4. The origin of the greatly raised activity is revealed by advanced characterizations, and in situ X-ray photoelectron spectroscopy (XPS) confirms the electron transport pathway in Pb2(CrO4)O@Mn3O4QDs with light illumination, unveiling the efficient spatial separation/transfer of charge carriers in oxygen vacancies-rich Pb2(CrO4)O@Mn3O4QDs S-scheme heterojunction. Consequently, powerful photoelectrons and holes accumulate in the Mn3O4 conduction band and Pb2(CrO4)O valence band, respectively, exhibiting prolonged long lifetimes and facilitating their involvement in CO2 photoreduction and H2O photooxidation through altering the interfacial charge dynamics.

Photocatalytic CO2 Reduction to Solar Fuels by a Chemically Stable Bimetallic Porphyrin-Based Framework.

Porphyrin-based photocatalysts have emerged as promising candidates for facilitating carbon dioxide (CO2) reduction due to their exceptional light-harvesting properties. However, their performance is hindered by complex synthesis procedures, limited structural stability, inadequate CO2 activation capabilities, and a lack of comprehensive structure-property relationships. This study investigates the performance of a porphyrin-based bimetallic framework, [Cu(TPP)Cu2Mo3O11] (TPP = tetrapyridylporphyrin), termed MoCu-1 for photocatalytic CO2 reduction. In addition to its straightforward one-pot synthesis method, the framework shows remarkable chemical stability, particularly notable in alkaline reaction conditions, making it a compelling option for sustainable catalytic applications. By harnessing the superior photoabsorption properties of the porphyrin linker and the abundance of catalytic sites provided by the bimetallic structure, this framework exhibits the potential for enhancing CO2 reduction efficiency. MoCu-1 demonstrates excellent activity in converting CO2 into CO, achieving a maximum yield of 3.21 mmol g-1 with a selectivity of ∼93%. We unravel the intricate interplay of structural features and catalytic activity through systematic characterization techniques and an in situ diffuse reflectance Fourier transform study, which provided insights into the mechanism governing CO2 conversion and was supported by density functional theory calculations. This work contributes to advancing our understanding of photocatalytic processes and offers guidance for designing robust materials for CO2 utilization in renewable energy applications.

Precisely Regulating Asymmetric Charge Distribution by Single-Atom Central Doped Ag-Based Series Clusters for Enhanced Photoreduction of CO2 to Alcohol Fuels.

High efficiently photocatalytic CO2 reduction (CO2RR) into liquid fuels in pure water system remains challenged. Iron polyphthalocyanine (FePPc) with strong light harvesting, unique Fe-N4 structure, abundant pores, and good stability could serve as a promising catalyst for CO2 photoreduction. To further improve the catalytic efficiency, herein, symmetry-breaking Fe sites are constructed by coupling with atomically precise M1Ag24 (M=Ag, Au, Pt) series clusters. Especially, the introduction of Pt1Ag24 causes the most asymmetric charge distribution of Fe in FePPc (followed by Au1Ag24 and Ag25), leading to the favorable CO2 adsorption and activation. In addition, Pt1Ag24-FePPc exhibits the most effective photogenerated carriers transfer and separation. As a result, Pt1Ag24-FePPc shows the methanol/ethanol yield of 48.55/32.97 μmol·gcat-1·h-1 in H2O-CO2 system under visible light irradiation, ~ 1.65/1.25-fold, 1.83/1.37-fold, and 3.6/1.61-fold higher than that of Au1Ag24-FePPc, Ag25-FePPc, and FePPc, respectively. This work provides a concept for precisely construction and regulation symmetry-breaking sites of cluster-based catalysts for effective CO2 conversion.