Click Chemical Ligation Research Articles

Mix-and-Read Digital MicroRNA Analysis Based on Flow Cytometric Counting of Target-Clicked Nanobead Dimer.

A one-step, enzyme-free, and highly sensitive digital microRNA (miRNA) assay is rationally devised based on flow cytometric counting of target miRNA-clicked nanobead dimers via a facile mix-and-read manner. In this strategy, highly efficient miRNA-sandwiched click chemical ligation of two DNA probes may remarkably stabilize and boost the dimer formation between two kinds of fluorescence-coded nanobeads, and the number of as-produced bead dimers will be target dose-responsive, particularly when the trace number of miRNA is much less than that of employed nanobeads. Finally, each fluorescence-coded bead dimer can be easily identified and digitally counted by a powerful flow cytometer (FCM) and accordingly, the amount of target miRNA can be accurately quantified in a digital way. This new digital miRNA assay can be accomplished with a facile mix-and-read operation just by simply mixing the target miRNA with two kinds of preprepared DNA probe-functionalized nanobeads, which do not require any nucleic acid amplification, purification, and complex operation procedures. In spite of the extremely simple one-step operation, benefiting from the low-background but high target-mediated click ligation efficiency, and the powerfully digital statistical capability of FCM, this strategy achieves high sensitivity with a quite low detection limit of 5.2 fM target miRNA as well as high specificity and good generality for miRNA analysis, pioneering a new direction for fabricating digital bioassays.

Click chemical ligation-enabled digital particle counting for multiplexed microRNA analysis

Digital counting assays, that quantify targets by counting individual signal entities, provide a promising way for the sensitive analysis of biomarkers even at the single-molecule level. Considering the requirements of complex enzyme-catalyzed amplification techniques and specialized instruments in traditional digital counting biosensors, herein, a simple digital counting platform for microRNA (miRNA) analysis is developed by employing the miRNA-templated click chemical ligation to hinge ultrabright quantum dot-doped nanoparticles (QDNPs) on the bottom of microplate well. Compared with the traditional short miRNA-mediated sandwich hybridization mechanism, the click chemistry-mediated ligation featured enhanced stability, achieving higher sensitivity by directly counting the number of QDNPs with a common wide-field fluorescence microscope. Furthermore, enzyme-free cycling click ligation strategy is adopted to push the detection limit of miRNA down to a low level of 8 fM. What is more, taking advantages of the tunable emission wavelength and narrow emission spectra of fluorescent nanoparticles, the platform enables simultaneous detection of multiplex miRNA targets without cross interference. Benefiting from the simple operation, high sensitivity, and good generality, miRNA analysis in complex samples is successfully achieved. This method not only pioneers a new route for digital counting assays but also holds great potential in miRNA-related biological researches.

Enzyme-free and copper-free strategy based on cyclic click chemical-triggered hairpin stacking circuit for accurate detection of circulating microRNAs

Accurate detection of circulating microRNAs (miRNAs) plays a vital role in the diagnosis of various diseases. However, enzyme-free amplification detection remains challenging. Here, we report an enzyme-free fluorescence resonance energy transfer assay termed “3C-TASK” (cyclic click chemical-triggered hairpin stacking kit) for the detection of circulating miRNA. In this strategy, the miRNA could initiate copper-free click chemical ligation reactions and the ligated products then trigger another hairpin stacking circuit. The first signal amplification was achieved through the recycling of the target miRNA in the click chemical ligation circuit, and the second signal amplification was realized through the recycling of ligated probes in a hairpin stacking circuit driven by thermodynamics. The two-step chain reaction event triggered by miRNAs was quantified by the fluorescence signal value so that accurate detection of target miRNA could be achieved. The 3C-TASK was easily controlled because no enzyme was involved in the entire procedure. Although simple, this strategy showed sensitivity with a detection limit of 8.63 pM and specificity for distinguishing miRNA sequences with single-base variations. In addition, the applicability of this method in complex biological samples was verified by detecting target miRNA in diluted plasma samples. Hence, our method achieved sensitive and specific detection of miRNA and may offer a new perspective for the broader application of enzyme-free chemical reaction and DNA circuits in biosensing.

High-throughput ultra-sensitive discrimination of single nucleotide polymorphism via click chemical ligation.

Single nucleotide polymorphisms (SNPs) have been proven to be important biomarkers for disease diagnosis, prognosis and disease pathogenesis. Here, taking the advantages of a self-assembled oligonucleotide sandwich structure and robust chemical reactions, we have developed a simple, high-throughput and effective colorimetric analytical technique termed CuAAC-based ligation-assisted assays (CuAAC-LA) for SNP detection using a DNA-BIND 96-well plate. With the 5'-azide and 3'-alkyne groups labelled on two oligonucleotide probes, the target DNA can direct a Cu(i)-catalyzed alkyne-azide cycloaddition (CuAAC) click reaction. Since the small difference in duplex stability caused by a single-nucleotide mismatch was amplified by the steric effects of these reactive groups for the ligation reaction of an unstable duplex, CuAAC-LA exhibited an ultra-sensitive discrimination ability for a mutant type target in the presence of large amounts of wild type targets. As low as 0.05% SNP could be clearly detected, which was better than most previously reported methods by various DNA ligases, indicating that a simple and rapid synthetic method i.e., the DNA template-directed click reaction held the potential to replace the ligase for SNP detection.

A Versatile Dynamic Light Scattering Strategy for the Sensitive Detection of Plant MicroRNAs Based on Click-Chemistry-Amplified Aggregation of Gold Nanoparticles.

Plant microRNAs (miRNAs) are naturally 2'-O-methylated at the 3'-terminal; as a consequence, they cannot be efficiently detected by traditional target-triggered polymerization reactions. Here, a simple but robust enzyme-free sensing strategy was developed for plant miRNA analysis by using dynamic light scattering (DLS) to monitor the crosslinking of gold nanoparticles (AuNPs) amplified by click chemical ligation. Combining the enzyme-free cycling chemical-ligation-mediated signal amplification, and the intrinsic outstanding ability of DLS for discriminating the extremely low level of particle aggregation in a large pool of monodisperse AuNPs, high sensitivity was achieved and as low as 78.6 fm plant miRNA could be easily detected.

An Enzyme-Free MicroRNA Assay Based On Fluorescence Counting of Click Chemical Ligation-Illuminated Magnetic Nanoparticles with Total Internal Reflection Fluorescence Microscopy.

MicroRNAs (miRNAs) have been considered as promising cancer biomarkers. However, the simple but sensitive detection of low levels of miRNAs in biological samples still remains challenging. Herein, we wish to report an entirely enzyme-free, simple, and highly sensitive miRNA assay based on the counting of cycling click chemical ligation (3CL)-illuminated fluorescent magnetic nanoparticles (MNPs) with a total internal reflection fluorescence microscopy (TIRFM). In this strategy, each miRNA molecule can trigger many cycles of click chemical ligation reactions to produce plentiful ligated oligonucleotides (ODNs) with both 5'-biotin and 3'-fluorophore, resulting in efficient signal amplification. It is worth noting that only the ligated ODNs can bring fluorophores onto streptavidin-functionalized MNPs (STV-MNPs). Notably, merely 10 fluorescent molecules on each 50 nm MNP can make it bright enough to be clearly visualized by the TIRFM, which can significantly improve the detection sensitivity for miRNA. Through fluorescence counting of individual MNPs and integrating their fluorescence intensities, the amount of target miRNA can be quantitatively determined. This miRNA assay can be accomplished in a mix-and-read manner just by simply mixing the enzyme-free 3CL reaction system with the MNPs before TIRFM imaging, which avoids tedious immobilization, washing, and purification steps. Despite the extremely simple operation, this strategy exhibits high sensitivity with a quite low detection limit of 50 fM target miRNA as well as high specificity to well discriminate miRNA sequences with a single-base variation. Furthermore, the applicability of this method in real biological samples is also verified through the accurate detection of the miRNA target in cancer cells.

Enzyme-free dual amplification strategy for protein assay by coupling toehold-mediated DNA strand displacement reaction with hybridization chain reaction

In this work, we present an enzyme-free electrochemical assay method that can detect target protein with ultra-high sensitivity through dual amplification. Firstly, target protein is specifically captured by its aptamer, and then is released due to toehold-mediated click chemical ligation (the first round of recycling) via DNA strand displacement reaction. Secondly, the overhang of aptamer on the electrode surface can hybridize with RP DNA and trigger hybridization chain reaction (the second round of recycling). Consequently, large amount of electrochemical species hexaammineruthenium (III) chloride ([Ru(NH3)6]3 +) can be embedded into double-stranded DNA to produce a remarkable electrochemical signal, thus the target protein can be quantified with ultra-high sensitivity. Taken thrombin as a model analyte, a wide linear dynamic range from 100 fM to 10 nM and a detection limit of 30 fM (S/N = 3) can be obtained. Meanwhile, since no enzyme is required for the measurement, the assay is relatively simple and inexpensive. Therefore, the protein assay method proposed in this work may have a great potential for clinical diagnosis and biomedical research in the future.

Enzyme-free and isothermal detection of microRNA based on click-chemical ligation-assisted hybridization coupled with hybridization chain reaction signal amplification.

An enzyme-free and isothermal microRNA (miRNA) detection method has been developed based on click-chemical ligation-assisted hybridization coupled with hybridization chain reaction (HCR) on magnetic beads (MBs). The click-chemical ligation between an azide-modified probe DNA and a dibenzocyclooctyne-modified probe DNA occurred through the hybridization of target miRNA (miR-141). HCR on MBs was performed by the addition of DNA hairpin monomers (H1 and H2). After magnetic separation and denaturation/rehybridization of HCR products ([H1/H2] n ), the resulting HCR products were analyzed by the fluorescence emitted from an intercalative dye, allowing amplification of the fluorescent signal. The proposed assay had a limit of detection of 0.55 fmol, which was 230-fold more sensitive than that of the HCR on the MBs coupled with a conventional sandwich hybridization assay (without click-chemical ligation) (limit of detection 127 fmol). Additionally, the proposed assay could discriminate between miR-141 and other miR-200 family members. In contrast to quantitative reverse transcription polymerase chain reaction techniques using enzymes and thermal cycling, this is an enzyme-free assay that can be conducted under isothermal conditions and can specifically detect miR-141 in fetal bovine serum.

Ultrasensitive detection of DNA and RNA based on enzyme-free click chemical ligation chain reaction on dispersed gold nanoparticles.

An ultrasensitive colorimetric DNA and RNA assay using a combination of enzyme-free click chemical ligation chain reaction (CCLCR) on dispersed gold nanoparticles (GNPs) and a magnetic separation process has been developed. The click chemical ligation between an azide-containing probe DNA-modified GNP and a dibenzocyclooctyne-containing probe biotinyl DNA occurred through hybridization with target DNA (RNA) to form the biotinyl-ligated GNPs (ligated products). Eventually, both the biotinyl-ligated GNPs and target DNA (RNA) were amplified exponentially using thermal cycling. After separation of the biotinyl-ligated GNPs using streptavidin-modified magnetic beads, the change in intensity of the surface plasmon band at 525 nm in the supernatants was observed by UV/vis measurement and was also evident visually. The CCLCR assay provides ultrasensitive detection (50 zM: several copies) of target DNA that is comparable to PCR-based approaches. Note that target RNA could also be detected with similar sensitivity without the need for reverse transcription to the corresponding cDNA. The amplification efficiency of the CCLCR assay was as high as 82% due to the pseudohomogeneous reaction behavior of CCLCR on dispersed GNPs. In addition, the CCLCR assay was able to discriminate differences in single-base mismatches and to specifically detect target DNA and target RNA from the cell lysate.

Enzyme-free fluorescent-amplified aptasensors based on target-responsive DNA strand displacement via toehold-mediated click chemical ligation

A new target-responsive DNA strand displacement system via toehold-mediated click chemical ligation was designed and prepared for enzyme-free fluorescent-amplified aptasensors. The aptasensors significantly amplified fluorescent signals in response to targets based on target recycling processes.

Labeling substrates of protein arginine methyltransferase with engineered enzymes and matched S-adenosyl-L-methionine analogues.

Elucidating physiological and pathogenic functions of protein methyltransferases (PMTs) relies on knowing their substrate profiles. S-adenosyl-L-methionine (SAM) is the sole methyl-donor cofactor of PMTs. Recently, SAM analogues have emerged as novel small-molecule tools to efficiently label PMT substrates. Here we reported the development of a clickable SAM analogue cofactor, 4-propargyloxy-but-2-enyl SAM, and its implementation to label substrates of human protein arginine methyltransferase 1 (PRMT1). In the system, the SAM analogue cofactor, coupled with matched PRMT1 mutants rather than native PRMT1, was shown to label PRMT1 substrates. The transferable 4-propargyloxy-but-2-enyl moiety of the SAM analogue further allowed corresponding modified substrates to be characterized through a subsequent click chemical ligation with an azido-based probe. The SAM analogue, in combination with a rational protein-engineering approach, thus shows potential to label and identify PMT targets in the context of a complex cellular mixture.