Clear Glass Research Articles

Evaluation of the Effects of Window Films on the Indoor Environment and Air-Conditioning Electricity Consumption of Buildings

The objective of this study was to evaluate the effects of window films on indoor environmental conditions and electricity consumption of air conditioning. The research focused on the performance of different window films (HAG, RG), taking into account variations from different building orientations. The findings of this research indicated that building orientation could significantly influence the duration of direct sunlight entering the interior, with the areas closer to the glass being more susceptible to the effects of outdoor temperature and solar radiation. The clear glass with heat-absorbing film (HAG) and reflective film (RG) both reduced the indoor temperature and indoor illuminance while increasing indoor comfort. The RG could accumulate less heat on the glass surface compared with the HAG. The glass temperature of the RG will be lower than the HAG. The electricity-saving ratios of the HAG were 1.4%, 1.9%, 1.4%, and 1.2%, respectively, when facing the east, south, west, and northwest orientations compared with the clear glass (OG). The electricity-saving ratios of the RG were 3%, 4.2%, 4.2%, and 10.3%, respectively.

Electrochromic Glazing and Evaluation of Visual and Non-Visual Effects of Daylight: Simulation Studies for Brasilia – Brazil

The employment of electrochromic glazing can be a solution to balance circadian lighting and avoid glare. This can be achieved by controlling daylight entering the room and may be useful within the context of highly glazed facades in buildings in hot climates. Nevertheless, the use of this technology is rarely discussed in this context. In this regard, the aim of this study is to investigate the electrochromic glazing for the lighting conditions, including visual and non-visual effects within the luminous context of Brasilia, Brazil. The method consisted of computer simulations of a representative highly glazed non-residential room with the comparison of electrochromic glazing and conventional clear glass. Climate Studio was used to evaluate the visual effects of light for the entire year, and ALFA for the evaluation of melanopic daylight illuminance, vertical illuminance, and melanopic daylight efficacy ratio (mel-DER) in four days, including two solstices and two equinoxes encompassing the beginning of the four seasons. Results for the electrochromic glazing showed a better balance between a minimum threshold of 250 lux of mel-EDI without exceeding 1,500 lux of vertical illuminance in comparison with the clear glass. This was achieved in 33.33% of the hours for the north, against 27.78% of the hours for the east, 29.17% for the west, and 24.72% for the south. For the clear glass, this balance was achieved in only 9.17% of the hours for north, 10.28% for east, 12.22% for west, and 15% for south. Regarding the spectrum, higher results of melanopic daylight efficacy ratio were observed for the clear glass over the four simulated days. The main conclusion was that the electrochromic glazing was capable of providing a better balance between visual and non-visual requirements and can be a suitable solution for highly glazed facades in Brasilia. Nevertheless, particularly for the north orientation, the supply of circadian lighting can be jeopardized when the electrochromic glazing remained at the dark state.

Numerical Investigation of the Effect of Changes in Glass Typeon the Cooling Load in a Building

Solar radiation enters the building through the glass by both radiation and conduction. The heat passing through the glass is one of the largest cooling loads. Therefore, modifying the glass type, will potentially reduce the cooling load significantly. This numerical study uses Cooling Load Temperature Difference (CLTD) method to calculate the change in cooling load in a five-story hospital. The Glass material was changed from clear glass to coated glass. Based on the calculation of cooling load per hour, from 07.00 to 19.00, it is obtained that the peak load occurs at 17.00, both when using clear glass clear and coated glass. The replacement of clear glass with coated glass results in a 70.0% decrease in radiation cooling load, from 104.59 kW to 31.38 kW. In addition, replacing this type of glass will reduce the total cooling load by 17.0%, from 418.80 kW to 347.57 kW. The decrease in total cooling load will lead to a decrease in the operational cost of the air conditioning system. If it is assumed that the AC system operates at 75% peak load for 16 hours per day, then replacing the glass will reduce electricity costs by approximately Rp. 43.6 million/month.

Light-Induced Colour Changes in Wood Surfaces in Indoor Conditions Determined by an Artificial Accelerated Test: Influence of Wood Species and Coating Materials

Stabilising the natural colour of wood species exposed to light in indoor conditions is a challenge that could be better addressed based on a deeper understanding of the occurring phenomena and influencing factors. This paper investigates comparatively the light-induced colour changes for three hardwood species, namely, European maple (Acer pseudoplatanus L.), European ash (Fraxinus excelsior L.) and European walnut (Juglans regia L.), as well as the influence of finishing with three types of clear, colourless waterborne lacquers: acrylic-polyurethane (F1), acrylic (F2) and polyurethane (F3) on their colour stability. Colour measurements in the CIELab system in conjunction with an artificial accelerated ageing test under the action of UV-VIS radiation, simulating natural light passing through window glass, and two types of test samples were employed to highlight the influence and contributions of the wood substrate and of the coating films to the global colour modifications. Coating films applied on 1 mm clear glass slides were employed as a sort of “detachable” finish for this purpose. Direct exposure to UV-VIS light caused visible colour changes for both uncoated and coated wood surfaces, the values of the calculated colour differences (ΔE) after a 72 h exposure being dependant on both the wood species and the coating material. Excepting two situations for walnut, statistically significantly higher colour differences were obtained for the uncoated samples: maple (9.36 units), ash (8.39 units), walnut (6.20 units), compared to the coated ones: maple (4.92–5.71 units), ash (2.25–3.94 units), walnut (4.74–7.70 units). The wood substrates underlying the coating films were found to bring the maximum contribution to the overall colour changes in the clear coated surfaces, while the coating films employed in this research demonstrated a fairly good colour stability to UV-VIS light exposure, with maximum colour changes (∆E) up to only 1.30 units. Overall, the wood species and the type of coating were found as influencing factors in interaction with the light-induced colour changes in wood surfaces in indoor conditions.

Combination of a propofol emulsion with alpha-2 adrenergic receptor agonists used for multimodal analgesia or sedation in intensive care units: a physicochemical stability study

ObjectivesTo assess the physicochemical stability of the combination of a propofol emulsion with an alpha-2 (α2) adrenergic receptor agonist (α2A; clonidine or dexmedetomidine) under conditions mimicking routine practice in an...

Efisiensi Energi Berkelanjutan: Strategi Desain dan Perhitungan Optimalisasi Efisiensi Energi pada Selubung Bangunan

Global warming is an increase in the temperature of the Earth's surface over the last few decades. Building energy consumption is the number two contributor to global warming. About 5-13% of the energy consumed during construction and the remaining 87-95% occur during the lifetime of a building, mainly for heating, cooling, and lighting purposes. This requires the selection of building materials that are certified green or environmentally friendly to help reduce energy consumption. The aim of this study is to evaluate the energy efficiency of a variety of designs of the building cover best in the glass protector as a building wall material. The research method uses comparative research that involves comparing energy efficiency between 4 different designs and materials with the calculation of OTTV on the facade of the building. Overal Thermal Transfer Value (OTTV) is a design parameter used to measure the level of energy efficiency of a building in reducing the heat from sunlight entering through walls and roofs. The results of the study showed massive walls with a 0.8 m high parapet and 1.2 m sharpening (Aluminum 4 mm with semi-flash white paint + 30 mm airspace + 150 mm precast concrete), along with window walls using the Stopray Vision 52 T (8 mm (#2) +12 mm Anti-Shatter+6 mm Clear Glass) and horizontal shading as high as 0.4 m, as well as openings with a configuration of 8 mm (No2) + 12 mm anti-shatter + 6 mm Clear glass, showing that the Overall Thermal Transfer Value (OTTV) reached its peak with a 29% decrease from the standard value. It states the combination of these elements provides optimal thermal performance, minimizing overall heat transfer.

Green synthesis of silica gel adsorbents: microwave boosts silanol groups for improved moisture uptake

This research investigates the influence of microwave irradiation on the silanol content and moisture adsorption capacity of silica gel prepared from clear glass waste. Employing a green and efficient microwave-assisted synthesis method, we demonstrate rapid formation of silica gel with enhanced properties. Fourier-transform infrared (FTIR) analysis confirms the presence of silanol (Si-OH) groups on the synthesized gel, with a focus on the characteristic peak at 956.44 cm⁻¹ indicating their abundance. Notably, the peak area of this peak significantly increases with increasing irradiation time (5 to 15 minutes). This translates to a parallel increase in moisture adsorption capacity, rising from 56% to 82%. The enhanced silanol content suggests the potential of microwave-derived silica gel as a high-performance desiccant, as these groups directly contribute to moisture binding. Our findings highlight the promising potential of waste glass valorization via microwave synthesis for developing sustainable and effective moisture adsorbents.

Kinetics of rancidity: 1H-NMR fingerprinting-based photodegradation monitoring of citronella oil

ABSTRACT Although known as a natural mosquito repellent, especially in the tropical region, citronella oil has many other therapeutic properties including antimicrobial and antifungal. Citronella oil can be applied in pure form or as a component in different cosmetic products. As with other essential oils, citronella has specific storage conditions to prevent its rancidity. 1H-NMR fingerprinting was used to monitor the changes in the concentration of citronellal, the main component of citronella oil. Quantitative analysis of the 1H-NMR spectral data digitized the degradation pattern of citronellal to determine the effect of sunlight exposure. Significant spectral changes were observed in clear glass vials starting from the 7th day of sun exposure. The degradation of citronellal followed first-order kinetics with a half-life of 15.7 ± 2.9 days. Moreover, the effect of sunlight exposure to citronellal is highly apparent in clear glass vials than in amber glass vials. The results of this study supported the general storage condition for essential oils to maximize shelf life.

Reducing Glare on Building Facade by Implementing Vertical Greenery Shading – user-sensation vs luminance-measurement

The user of high-rise office building usually feel discomfort glare because of high luminance from glass facade. This experimental research has an objective to find out how vertical greenery can reduce the sensation of glare. Using here a cubicle that represent one person workstation in 2m x 4m x 3.45m dimension with opening from clear glass, WWR 50%. The base case was the condition without vegetation compared to condition with Vernonia elliptica plant LAI 0.75 and LAI 1.5 which implemented as shading. The result found that vegetation LAI 1.5 can reduce luminance 54.3-56.1% compared to without vegetation. The sensation of glare from Uncomfortable becomes Perceptible (for direct light); from Perceptible-Acceptable becomes Imperceptible-Perceptible (for diffuse light). Vegetation LAI 0.75, for direct light, can reduce luminance 35.3-53.6% compared to condition without vegetation. The glare sensation vote becomes Acceptable. Whilst for diffuse light, although the luminance measurement was increase because of the reflected glare from surroundings, the natural aesthetic and green colour of leaves was relaxing, so that the sensation of glare still at the same vote, between Perceptible-Acceptable compared to without vegetation. This result proof that for biotic shading, besides the quantitative, the qualitative variables play the role.

An Experimental Method to Evaluate the Contribution of Wood Substrate and Coating Film to the Light Induced Colour Changes of Wood Surfaces

The paper presents an original laboratory method developed to determine and compare the light-induced colour changes of uncoated and coated wood surfaces, while also allowing the highlighting and evaluation of the individual contributions of the substrate and coating film to the global effect. Two types of wood test samples: V1 (uncoated) and V2 (coated) and coating films on 1mm thick clear glass slides were employed. The behaviour of the wood substrate under the coating film was simulated on uncoated substrate covered with a coated glass slide. European maple (Acer pseudoplatanus L.) and two types of transparent water-based varnishes with 2k formulations were used. The samples were exposed for up to 72 hours to artificial UV-VIS light in accelerated tests simulating natural light passing through window glass. Colour changes were measured in the CIELab system, as well as the chemical changes of the wood substrate and the coating films by FTIR analysis. Exposure of uncoated maple wood resulted in a total colour difference (E) of 10.83 units and this was only slightly reduced by coating (9.29-9.81 units). Exposure through the glass slide reduced the colour changes of the uncoated and coated wood surfaces by 37-43%. Colour changes of 5.79-6.85 units were measured on the wood substrate exposed under coated glass slides, whilst the colour changes of the coating films on glass slides were only 0.64-1.0 units, which indicates a maximum contribution of the wood substrate to the light-induced colour changes of the coated surfaces. FTIR investigation confirmed this finding.

Application of Citric Acid and Packaging Type Selection in Preserving Stability of Homemade Tomato Sauce

Tomatoes are horticultural product widely grown in Indonesia and consumed by societies. They contain minerals, vitamins, and bioactive compounds beneficial for health. Unfortunately, tomatoes quickly decline in quality, causing their post-harvest shelf life to be short. One attempt to prevent the wastage of tomatoes is to process them into sauce products. To extend the stability of tomato sauce, food-grade preservatives such as citric acid need to be added. Furthermore, different packaging also affects the stability of tomato sauce. This study used citric acid with varying concentrations of 0.05%, 0.10% and 0.15%. The packaging used included Clear Glass Bottles, Dark Glass Bottles, Clear Plastic Bottles, and Dark Plastic Bottles. The tomato sauce was evaluated by room storage for 30 days to investigate the stability of water content, acidity level, and total microbes. Adding 0.15% citric acid may be considered in preserving tomato sauce with a difference in increasing water content of 1.7%, a difference in decreasing pH of 0.1, and a difference in increasing total microbes of 1.4 cfu/g. Using a dark glass bottle may better protect tomato sauce from quality degradation.

PHYSICAL AND THERMAL CHARACTERISTICS OF EXPANDED FOAM GLASSES USING CRUDE GLYCEROL AS A FOAMING AGENT

Expanded foam glasses were fabricated from a clear color soda-lime silicate glass. Crude glycerol was used as an effective foaming agent which promoted small closed cell pores. This research studied the effect of crude glycerol content on the expanding characteristics and thermal properties. The expanding behavior relied on the thermal decomposition mechanism of the foaming agent as well as the sintereing temperature. Expanded foam glasses fabricated at 850°C showed uniform pore size compared to those fabricated at other temperatures (800°C and 900°C). Pore size of the synthesized foam glasses generally increased with increasing firing temperature. The evidence of black color in some areas for samples fabricated at 800°C occurred due to incomplete combustion of crude glycerol within the bulk structure. Samples produced at 850°C and 900°C showed white color shading associated with complete combustion of carbonaceous compound. Foam glasses sintered at 900°C showed structural distortion due to glass melting during the foaming process. Large holes or gaps within the structures occured due to the sweeping and combining of gas bubbles during sintering.

Effect of storing conditions (lighting, temperature and bottle color) on rosé wine attributes

The majority of rosé wines are bottled in clear bottles as color is an important factor in consumer preference. Post-bottling wine can be exposed to UV–visible light and temperature fluctuations resulting in quality degradation. This study investigated the impact of bottle color (flint and antique green), light exposure (darkness, LED and fluorescent bulb), and temperature (12 °C and 22 °C) on rosé wine quality using a full factorial design with three different wines (Grenache, Pinot noir and Zinfandel). The impact on chemical composition, color, phenolics and aromatics was determined. Projective mapping was carried out for sensorial analysis. Changes in the aromatics, color and phenolic composition were detectable after three months and more noticeable after six months of storage. Overall, all variables studied impacted rosé wine characteristics significantly. However, higher temperature in combination with clear glass bottles under fluorescent light were the most detrimental conditions.

Analisa Pencahayaan Alami Ruang Kerja Pada Gedung Perkantoran Dengan Software DIALux Evo 11.1 (Studi Kasus : Gedung Balai Kota, Tebing Tinggi)

Lighting is an important aspect of buildings, especially in office buildings. A office building as a work area requires adequate comfort and fulfils lighting standards so that users can perform their activities smoothly and have good productivity. According to the observations of the Balai Kota Teb ing Tinggi building, there are no other high-rise buildings around the building and the window opens on either side of the building using windows with clear glass but without shading devices resulting in the illumination or distribution of natural lighting leading to the room looks very good. This study aims to analyze the level of natural lighting in the office workspace of Balai Kota Tebing Tinggi whether it has met the lighting standard SNI 6197-2020 or not because the building is a government service center that has already met the requirements of lighting according to the standards that have been in force. The study was conducted using a quantitative method with a simulation approach using the Dialux evo 11.1 software. The results of the study showed that there were some workspaces that did not meet the standard due to the influence of several factors such as the conditions of the sky and the time at the time of the simulation.

Women as Industry 4.0. entrepreneurs: unlocking the potential of entrepreneurship in Higher Education in STEM-related fields

Industry 4.0 is the realization of digital transformation including enhanced productivity and flexibility due to real-time decision-making, which is possible due to the high-speed internet, the internet of things, and smart machines capable of autonomously exchanging information, triggering actions, and controlling each other independently. A high level of education and skills is increasingly more important in the job market over the next years necessitating finding a balance among behavioural, technological, analytical, and entrepreneurial skills. EU and governments worldwide should invest in closing the gender gap in science, technology, engineering, and mathematics (STEM) education as this will directly impact the economic growth. Even though there is some progress in the hiring percentage of women in large technological companies, a clear glass ceiling in leadership roles is still remains. Here, we have undertaken a pilot study at University Complutense of Madrid (UCM, Spain) aimed at empowering women in academia to transition from the “publish or perish” paradigm towards creating and protecting their intellectual property to close the gender gap in STEM fields and leadership roles as well as training to fuel the development of innovative start-ups addressing societal challenges. A total of 20 participants inclusive of UCM staff and postgraduate and postdoctoral researchers were enrolled after successfully obtaining at least a score of 5 out of 10 in custom-made Entrepreneurial competency test provided by Business and Professional Women Association (BPW, Spain) and theGrowBox Innovation Ltd. The study, approved by the UCM ethical committee, was conducted after participants engaged and completed a training programme on “Enterpreneurship in STEM-related fields in Higher Education” aimed to introduce the participants to the entrepreneurial world. This involved a structured training programme covering the (i) business canvas design; (ii) development of minimum viable product (MVP); (iii) market evaluation; (iv) finance analysis using the Growbox platform; (v) introduction to venture capital; and (vi) human resources management followed by individual mentoring sessions prior completion of their business plans that were pitched to a panel of mentors and BPW representatives. Finally, all participants completed an anonymous survey of 12 open questions to evaluate the impact of the training in awakening the entrepreneurial spirit in academic researchers in Higher Education in STEM-related fields. Three-quarters of participants were novices in terms of Entrepreneurship, but all participants after the programme presented a complete business plan. The three points that women identified as prohibitive factors were lack of self-confidence, ambition, and knowledge in the fields of patent filing, finance and marketing. Participants were likely to initiate their own start-up in the next five years, but had mixed fillings regarding the complexity of the process. Nine months after the course ended, four out of 20 participants have been successful in attracting initial funding to support the initiation of a start-up involving protected intellectual property and managed to secure an award to provide them with office space to build their company. The long-term impact of this training programme will need to be followed up. Entrepreneurial training is crucial to be embedded in curricula for postgraduate and if possible undergraduate students to pursue a major transformation targeting the STEM-related fields in Higher Education to enable women in becoming key participants and leaders in the Industry 4.0 era.

Smart double glazing integrated polymer dispersed liquid crystal for enhancing building's thermal performance in hot-arid climate

Polymer-dispersed liquid crystal glazing is an electrically activated smart switchable glazing that requires an AC power supply to become transparent and remains opaque without power. This dynamic feature, with multiple transparency states, is suitable for building in hot and arid climates. It can effectively reject unwanted solar energy, allowing visible light while contributing to building energy efficiency by reducing the carbon footprint. In this work, the PDLC glazing system was included with a low-e coated glass and this coupled system was investigated with two control approaches for residential buildings in hot arid climates. The first control is a standard On-Off operation based on the tenant preferences, while the second is able to set glazing transparencies according to the solar radiation intensity, in order to minimize the penetration of direct solar radiation and to provide daylighting and indoor privacy protection. The system is reversed to examine the proper positions and layer order in the glazing system. The proposed system demonstrates remarkable enhancements in indoor thermal performance, surpassing clear glass by 21 % in the south orientation and 25.5 % in the west orientation. Furthermore, when the PDLC is oriented towards the outdoor environment, the system achieves an impressive 53.9 % improvement in heat gain control compared to clear glass. Additionally, the system not only enables dynamic control over direct solar radiation but also offers efficient daylighting and indoor privacy protection.

Determination Of Optical Constant of a Clear Glass Material for Accurate Daylighting and Solar Heat Gain Assessment Using Spectrophotometer Measurements

Many qualities make glass attractive, as it is transparent, chemically inert, environmentally friendly, sustainable, strong, easily available and relatively cheap. Recently, many researchers have been interested in designing the buildings to get the benefit from daylight inside, which saves a lot of building consumption for artificial lighting, which gives visual and thermal comfort and also contributes to reducing costs. The complex refractive index of glass is a very crucial concept because it determines not only how much light is reflected and transmitted, but also its angle of refraction in glass. The optical constants of glass material are very useful for determining its radiative properties, as well as for selecting the appropriate thin-film coatings on a glass substrate. The objective of this study is to calculate the real part (n) and the imaginary part (k) of the complex refractive index of a clear glass material using a simple method based on the reflectivity and transmissivity measurements. In this study, the parts n and k are derived from the equations of the reflectivity at near zero incidence and transmissivity at normal incidence by using Shimadzu IR-70 Spectrophotometer and Cary 5E Spectrophotometer apparatuses. The real and the imaginary parts of the complex refractive index of the glass sample obtained in the present study are in very good agreement with Rubin’s data. Although, a direct comparison between different samples is not possible, due to the difference in manufacturing process and material composition.

The Influence of Storage Conditions of Cold-Pressed Rapeseed Oil on Its Quality Parameters

Stored vegetable oil undergoes numerous processes, i.e., oxidation, hydrolysis, and thermal polymerization. As a result, its quality and organoleptic parameters deteriorate. The content of natural chlorophyll and carotenoid pigments determines the color of rapeseed oil. Almost imperceptible changes in the color of the oil may indicate the deterioration of its quality. Therefore, vegetable oils must be stored in the appropriate conditions to protect them against unfavorable factors leading to deterioration. This publication examines and describes the influence of storage temperature, type of packaging (clear glass, colored glass, PET), and presence of an oxygen-free atmosphere on the quality of stored cold-pressed rapeseed oil for three and six months. Changes in the following parameters were verified: the content of chlorophyll and carotenoid pigments, oil color (measured by the CIE Lab method), acid value, and radical scavenging activity (%RSA) by the ABTS (diammonium 2,2′-azinobis[3-ethyl-2,3-dihydrobenzothiazole-6-sulphonate) method. The decrease in the content of natural dyes was 7 to 87% after three months, depending on storage conditions, and after six months, from 12 to 97%. To determine which factors were responsible for the change in the physicochemical properties of the oil during storage, a principal component analysis (PCA) was performed.

Physicochemical and sensory analysis of olive oil from roasted olives

Olive oil from toasted olives (OOt) is produced locally in the areas of the Moroccan Rif. The technique is based on extracting oil from olives that have been previously roasted to preserve them during the pre-processing storage and to preserve the extracted oil for a longer time. This study aims to characterize and compare OOt and olive oil from crude olives (OOc) from the same variety of fruit and harvest. Several physicochemical parameters were determined for the studied oil, such as acidity value (<1 % of oleic acid), peroxide value (<20 meq of O2/kg of oil), K270 (<0.25), and majority fatty acid composition Sensory analysis revealed that OOt was more appreciated by consumers because of its special aromatic roasting notes, receiving a higher score than OOc. From these data and the global quality index (5.67), OOt can be classified as virgin olive oil if the actual raw olive oil scale is used. OOt was found to be stable for six months under different temperature conditions (18–19 °C and –18 °C) and packaging (clear glass, PET, and ceramics).

Thermo-optical performance of building glass under salt sedimentation

The phenomenon of salt sedimentation on the building glass surface occurs in coastal salt-fog climates, leading to the changes in surface heat transfer characteristics and optical properties, which affects the indoor environment and gradually reduces building energy performance. Regrettably, there remains a paucity of research concerning the impact of salt sedimentation on the thermal and optical performances of building glass. This study investigated the salt sedimentation features of building glass using an indoor accelerated test, and explored the relationships between surface heat transfer coefficients, optical properties and salt sedimentation. As the spray duration grew, the sedimented salt stains appeared more dispersed and less dense, but their dimensions increased, exhibiting an exponential growth tendency. The salt sedimentation per unit area grew logarithmically with the spray duration, with the magnitudes being 14.4 to 40.0 mg/m2 and 15.6 to 44.3 mg/m2 under 5% and 10% brine concentration conditions, respectively. The convection heat transfer coefficient (CHTC) and radiative heat transfer coefficient (RHTC) showed a linear monotonic increase with the salt sedimentation, in contrast to the control condition, with the maximum growth rates reaching 178.7% and 97.2%, respectively. The extended CHTC model could be used to calculate the CHTC regarding the impact of salt sedimentation and wind speed. The entire solar spectral transmittance and reflectance was affected by salt sedimentation, and the visible light transmittance, reflectance, hemispherical emissivity, and shading coefficient of low-E and clear glasses all decreased linearly with the increase of salt sedimentation.