Chloride Complexes Research Articles

Garnet geochronology, major and trace element geochemistry of the Huanggangliang Fe-Sn polymetallic deposit, NE China

Cu-Fe (Au), W-Sn (Mo), Pb-Zn (Ag) and other element assemblages are common in many skarn deposits, but examples of Fe and Sn coexistence in nature are relatively rare. The Huanggangliang deposit in the southern Great Xing'an Range is the largest Fe-Sn polymetallic deposit in northern China, and there are five main mining areas (SK Ⅰ–SK Ⅴ) distributed along a SW–NE trend. SK Ⅰ and SK Ⅲ are the two larger mining areas in the Huanggangliang deposit, and their mineral assemblages and wall-rocks are significantly different: cassiterite and metal sulfides are duncommon in SK Ⅰ (andesite), while they are widely distributed in SK Ⅲ (marble). Garnet is widely distributed in SK Ⅰ and SK Ⅲ mining areas, and provides a good opportunity to explore the mechanism of Fe-Sn assemblage differentiation. Three types of garnet are distinguishable (Grt 1, Grt 2 and Grt 3) based on their mineral associations, textures and locations, and they mainly belong to the andradite-grossular solid solution series. The LA–ICP–MS U-Pb ages of the garnets from SK Ⅰ and SK Ⅲ are 136.0 ± 1.2 Ma (n = 25, MSWD = 1.9) and 136.2 ± 2.6 Ma (n = 37, MSWD = 1.8), respectively, suggesting that magmatic-hydrothermal activity in these two mining areas began at the same time. Grt 1 (located deep in SK Ⅰ and SK Ⅲ) and Grt 2 (located shallowly in SK Ⅰ) are mainly andradite, while Grt 3 (located shallowly in SK Ⅲ) is mainly grossular. They are all enriched in high field strength elements (HFSEs) and depleted in large ion lithophile elements (LILEs), and their REE patterns are enriched in light rare earth elements (LREEs) and depleted in heavy rare earth elements (HREEs). However, Grt Ⅰ-1a and 1b (deep garnets in SK Ⅰ) exhibit obvious positive Eu anomalies, while the other garnet types exhibit negative or no obvious Eu anomalies. Additionally, Grt 3 has high contents of V, Sn, U, Th, Zn and Y, and low contents of W and Mo. This pattern implies that the garnets in deep SK Ⅰ may have formed under oxidizing conditions with high temperatures, high oxygen fugacity (fO2) and weak acidity, while the garnets in shallow SK Ⅲ formed under reducing conditions with moderate temperatures, moderate fO2 and near-neutral pH. The garnets in shallow SK Ⅰ and deep SK Ⅲ may have formed under weak oxidation–reduction conditions at moderate to high temperatures, moderate fO2 and weakly acidic to neutral pH conditions. Our newly reported field geological, mineralogical, and geochemical data from garnet suggest that the ore-forming fluids of the Huanggangliang were magmatic-hydrothermal fluids mixed with slightly acidic external fluids, chloride complexes may have been the main transport ligands of REEs. The metallogenic environment may be an important factor leading to the difference of mineral assemblages in the Huanggangliang deposit.

New penta-Coordinated Cadmium(II) Complexes: Synthesis, Characterization, Thermal, Antimicrobial, Antioxidant and Cytotoxicity Properties.

In this paper, a new tridentate Schiff base ligand (L) with nitrogen donor atoms and its cadmium(II) complexes with the general formula of CdLX2 (X=Cl-, Br-, I-, SCN-, N3 -, NO3 -) have been synthesized and characterized by physical and spectral (FT/IR, UV-Vis, Mass, and 1H, 13C NMR spectroscopies) methods. Also nano-structured cadmium chloride and bromide complexes were synthesized by sonochemical method and then used to prepare nanostructured cadmium oxide confirmed by XRD and SEM techniques. Thermal behavior of the compounds was studied in the temperature range of 25 to 900 °C under N2 atmosphere at a heating rate of 20 °C/ min. Moreover, thermo-kinetic activation parameters of thermal decomposition steps were calculated according to the Coats-Redfern relationship. Antimicrobial activities of the synthesized compounds against two gram-positive and two gram-negative bacteria such as Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and two fungi of Candida albicans and Aspergillus niger were investigated by well diffusion method. SEM technique was used to monitor the morphological changes of the bacteria treated with the compounds. The 2,2-Diphenyl-1-picrylhydrazyl(DPPH) and the ferric reducing antioxidant power (FRAP) methods were used to evaluate the antioxidant ability of the ligand and its cadmium(II) complexes. In final, the cytotoxicity properties of the ligand and some cadmium(II) complexes against PC3 cancer cells were evaluated by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) bioassay and nitric oxide (NO) level measurement. The morphological changes of prostate cancer (PC3) cells due to treatment with the ligand and its complexes confirmed their anticancer effectiveness.

Cheap and effective potentiometric PVC sensor for the determination of imidazolium based ionic liquids in aqueous and aqua-organic media

Owing to the extensive research on imidazolium based ionic liquids; the present study aims to design a potentiometric sensor for alkyl methylimidazolium ion. For this, poly(vinyl chloride) PVC membrane based on the neutral ion-pair complexes of cetylpyridinium chloride and sodium dodecyl sulfate (CPy+DS−) has been developed. The synthesized ion selective electrode (ISEs) have been found to show linear response with near-Nernstian slope for CnMeImCl (C10MeImCl, C12MeImCl and C14MeImCl). The proposed ISEs show quick response (5–6 s) and provide wide pH range for working. The influence of various ions on the performance of ion-selective electrode is investigated in terms of potentiometric selectivity coefficients, which were determined by separate solution method. The performance of synthesized ISE in examining the critical micellar concentration (cmc) of CnMeImCl in aqueous, aqua-organic media and in the presence of amino acids (glycine, L-glutamic acid and L-phenylalanine) has been found to be satisfactory and confirmed through conductivity and fluorescence measurements. This emphasizes its worth for in-situ analysis of alkyl methylimidazolium ions, during an organic reaction, and hence possible reaction mechanism evaluation. Different thermodynamic parameters such as Standard Gibbs energies of micellization (ΔGm∘), degree of counterion dissociation (α), amphiphile tail transfer Gibbs free energy (ΔGm,trans∘) have been evaluated. Further, the analytical application of synthesized electrode as end point indicator in the potentiometric titration of C14MeImCl with SDS has also been explored, which compared well with improved two-phase titration method. The current study is novel as it involves the use of a cheaper material (CPyCl) as ionophore and that the same electrode can be used for different chain alkyl methylimidazolium ions simply by changing the internal reference solutions.

Salinity-Induced Changes in Heavy Metal Behavior and Mobility in Semi-Arid Coastal Aquifers: A Comprehensive Review

Semi-arid coastal aquifers face critical challenges characterized by lower rainfall, higher evaporation rates, and looming risk of over-exploitation. These conditions, coupled with climate change, are conducive to seawater intrusion and promote mechanisms associated with it. The understanding of metal behavior in such environments is limited, and hence, an attempt is made through this review to bridge the knowledge gap. A study on the behavior of trace metals within a specific context of semi-arid coastal aquifers was carried out, and 11 aquifers from 6 different countries were included. The review observed that trace metals within semi-arid coastal aquifers exhibit distinctive behaviors influenced by their surrounding environment. The prevalence of evaporation and continuous seawater intrusion played a pivotal role in shaping trace metal dynamics by curtailing groundwater flux. The findings suggest that the formation of stable Cl and organic ligands under increased alkaline conditions (pH > 8) has higher control over Zn, Pb, and Cd toxicity in a highly ionic reactive condition. In addition, dominant control of Fe/Mn-hydroxide association with Pb and high organic affinity of Zn played a pivotal role in controlling its bioavailability in aquifers such as WFB, Saudi Arabia NW-C and India. On the contrary, under prevailing acidic conditions (pH < 6), carbonate and SO4-ligands become more dominant, controlling the bioavailability/desorption of Cu irrespective of its origin. The behavior of Ni is found to be controlled by stable organic ligands increasing salinity. An increase in salinity in the considered aquifers shows an increase in bioavailability of Ni, except UmC, South Africa, where organic ligands act as a sink for the metal, even at low pH conditions (pH < 5.5). This study indicates that factors such as mineral saturation, carbonate complexes, pH variations (pH > 8), and chloride complexes govern the distribution of trace metals further enhanced by prolonged water residence time. Nonetheless, specific conditions, such as a reducing and acidic environment, could potentially elevate the solubility of highly toxic Cr (VI) released from anthropogenic sources.

A spectroscopic study of the stability of uranyl-carbonate complexes at 25–150 °C and re-visiting the data available for uranyl-chloride, uranyl-sulfate, and uranyl-hydroxide species

The stabilities of uranyl-carbonate and uranyl-hydroxide aqueous complexes were experimentally determined at temperatures ranging from 25 to 125 °C using in situ UV–vis and Raman spectroscopic techniques. Combined with earlier determinations of the stability of chloride, sulfate, and hydroxide complexes at temperatures up to 250 °C, these data permit to create a consolidated dataset suitable for modeling of U(VI) mobilization in natural systems. The parameters of the Modified Ryzhenko-Bryzgalin and the Helgeson-Kirkham-Flowers (HKF) Equations of State (EoS) were derived based on this dataset and used for thermodynamic modeling different scenarios of U(VI) mobilization. These models suggest that at conditions relevant to natural systems, carbonate-mediated transport of U(VI) is likely suppressed by the high stability of solid UO2(OH)2 and Na2U2O7. In contrast, sulfate-mediated mobilization mechanisms are highly efficient at acidic and near-neutral pH conditions and can lead to effective hydrothermal mobilization of U(VI).

Unlocking Four-electron Conversion in Tellurium Cathodes for Advanced Magnesium-based Dual-ion Batteries.

Magnesium (Mg) batteries hold promise as a large-scale energy storage solution, but their progress has been hindered by the lack of high-performance cathodes. Here, we address this challenge by unlocking the reversible four-electron Te0/Te4+ conversion in elemental Te, enabling the demonstration of superior Mg//Te dual-ion batteries. Specifically, the classic magnesium aluminum chloride complex (MACC) electrolyte is tailored by introducing Mg bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2), which initiates the Te0/Te4+ conversion with two distinct charge-storage steps. Te cathode undergoes Te/TeCl4 conversion involving Cl- as charge carriers, during which a tellurium subchloride phase is presented as an intermediate. Significantly, the Te cathode achieves a high specific capacity of 543 mAh gTe -1 and an outstanding energy density of 850 Wh kgTe -1, outperforming most of the previously reported cathodes. Our electrolyte analysis indicates that the addition of Mg(TFSI)2 reduces the overall ion-molecule interaction and mitigates the strength of ion-solvent aggregation within the MACC electrolyte, which implies the facilized Cl- dissociation from the electrolyte. Besides, Mg(TFSI)2 is verified as an essential buffer to mitigate the corrosion and passivation of Mg anodes caused by the consumption of the electrolyte MgCl2 in Mg//Te dual-ion cells. These findings provide crucial insights into the development of advanced Mg-based dual-ion batteries.

Unlocking Four‐electron Conversion in Tellurium Cathodes for Advanced Magnesium‐based Dual‐ion Batteries

AbstractMagnesium (Mg) batteries hold promise as a large‐scale energy storage solution, but their progress has been hindered by the lack of high‐performance cathodes. Here, we address this challenge by unlocking the reversible four‐electron Te0/Te4+ conversion in elemental Te, enabling the demonstration of superior Mg//Te dual‐ion batteries. Specifically, the classic magnesium aluminum chloride complex (MACC) electrolyte is tailored by introducing Mg bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2), which initiates the Te0/Te4+ conversion with two distinct charge‐storage steps. Te cathode undergoes Te/TeCl4 conversion involving Cl− as charge carriers, during which a tellurium subchloride phase is presented as an intermediate. Significantly, the Te cathode achieves a high specific capacity of 543 mAh gTe−1 and an outstanding energy density of 850 Wh kgTe−1, outperforming most of the previously reported cathodes. Our electrolyte analysis indicates that the addition of Mg(TFSI)2 reduces the overall ion‐molecule interaction and mitigates the strength of ion‐solvent aggregation within the MACC electrolyte, which implies the facilized Cl− dissociation from the electrolyte. Besides, Mg(TFSI)2 is verified as an essential buffer to mitigate the corrosion and passivation of Mg anodes caused by the consumption of the electrolyte MgCl2 in Mg//Te dual‐ion cells. These findings provide crucial insights into the development of advanced Mg‐based dual‐ion batteries.

Non-Symmetrically Fused Bis(arylimino)pyridines with para-Phenyl Substitution: Exploring Their Use as N′,N,N″-Supports in Iron Ethylene Polymerization Catalysis

Through the implementation of a one-pot strategy, five examples of non-symmetrical [N,N-diaryl-11-phenyl-1,2,3,7,8,9,10-heptahydrocyclohepta[b]quinoline-4,6-diimine]iron(II) chloride complexes (aryl = 2,6-Me2Ph Fe1, 2,6-Et2Ph Fe2, 2,6-i-Pr2Ph Fe3, 2,4,6-Me3Ph Fe4, and 2,6-Et2-4-MePh Fe5), incorporating fused six- and seven-membered carbocyclic rings and appended with a remote para-phenyl group, were readily prepared. The molecular structures of Fe2 and Fe3 emphasize the variation in fused ring size and the skewed disposition of the para-phenyl group present in the N′,N,N″-ligand support. Upon activation with MAO or MMAO, Fe1–Fe5 all showed high catalytic activity for ethylene polymerization, with an exceptional level of 35.92 × 106 g (PE) mol−1 (Fe) h−1 seen for mesityl-substituted Fe4/MMAO operating at 60 °C. All catalysts generated highly linear polyethylene with good control of the polymer molecular weight achievable via straightforward manipulation of run temperature. Typically, low molecular weight polymers with narrow dispersity (Mw/Mn = 1.5) were produced at 80 °C (MMAO: 3.7 kg mol−1 and MAO: 4.9 kg mol−1), while at temperatures between 40 °C and 50 °C, moderate molecular weight polymers were obtained (MMAO: 35.6–51.6 kg mol−1 and MAO: 72.4–95.5 kg mol−1). Moreover, analysis of these polyethylenes by 1H and 13C NMR spectroscopy highlighted the role played by both β-H elimination and chain transfer to aluminum during chain termination, with the highest rate of β-H elimination seen at 60 °C for the MMAO-activated system and 70 °C for the MAO system.

An Evaluation of the Beneficial Effects of Polyamide 6's Thermal Stabilization by Ferric Chloride Complexation as a Novel Carbon Fiber Precursor

This study investigated the impact of stabilization time on pretreated polyamide 6 (PA6) fibers using various analytical techniques, including thermal analysis (TGA and DSC), infrared (IR) spectroscopy, X-ray diffraction (XRD), tensile testing, and density measurements. The two-step atmospheric air-based stabilization process for pretreated PA6 multifilament bundles involved initial thermal stabilization at 170 °C in an air atmosphere after ferric chloride impregnation, followed by a second step of thermal stabilization at 245 °C. Ferric chloride impregnation followed by thermal stabilization in an air atmosphere resulted in crucial structural transformations. The density values of the samples increased following thermal stabilization, accompanied by a decrease in tensile values. Ferric chloride pretreated and thermally stabilized PA6 fibers were found to be fully stabilized after 120 min of stabilization before the carbonization stage. The findings obtained from the DSC, XRD, and IR spectroscopy methods indicated the occurrence of disordering phases due to the scission of hydrogen bonds. The TGA findings showed significant increases in carbon yield percentages at 500 °C and 850 °C, reaching 71.4% and 63.5%, respectively, for the sample heat treated at 245 °C for 120 min. The addition of ferric chloride is expected to potentially reduce processing costs for final carbon fiber production by decreasing the time required for the thermal stabilization of PA6.

Specific features of Copper(II) chloride complexes with Caffeine: Synthesis, Structure, DFT calculations

The present article is devoted to the consideration of the interconversions of copper(II) chloride complexes with caffeine (caf) ([CuII2(μ2-Cl)2(caf)2(H2O)2] (1),[CuII3(μ-Cl)6(caf)(H2O)]n (1a), [Cu4(μ2-Cl)6(μ4-O)(caf)4](1b), 2[CuII(caf)Cl2].0.25THF (1c), [CuII(caf)2Cl2] (2)), depending on the synthesis conditions, and to studies on the four-nuclear copper(II) bromide complex with acetamide (AcAm) ([Cu4(μ2-Br)6(μ4-O)(AcAm)4](3)). The results obtained have been confirmed by different methods (powder XRD, single crystal XRD analysis, IR-, ESI-MS-, EPR-spectroscopy, and magnetic properties studies). Two bromide ions in (3) are non-equivalent to the other four and this fact may result in the modification of the exchange integral between bonded copper ions. Single crystal XRD data have been compared with the results of DFT calculations. It has been found that the thermodynamic stability of the complexes grows with an increase in the number of copper atoms and bridging chloride ions and a decrease in the number of water molecules in the formula unit of the compound. The calculation results for complexes with acetamide are in a good correlation with those of caffeine and experimental data.

Structural Control Enables Catalytic and Electrocatalytic Activity of Porous Tetrametallic Nanorods.

Integrating more than one type of metal into a nanoparticle that has a well-defined morphology and composition expands the functionalities of nanocatalysts. For a metal core/porous multimetallic shell nanoparticle, the availability of catalytically active surface sites and molecular mass transport can be enhanced, and the multielemental synergy can facilitate intraparticle charge transport. In this work, a reliable and robust synthesis of such a functional tetrametallic nanoparticle type is presented, where a micro- and mesoporous PdPtIr shell is grown on Au nanorods. The effect of critical synthesis parameters, namely temperature and the addition of HCl are investigated on the hydrodynamic size of the micellar pore template as well as on the stability of the metal chloride complexes and various elemental analysis techniques prove composition of the porous multimetallic shell. Due to the synergistic properties, the tetrametallic nanorods possess extensive negative surface charge making them a promising catalyst in reduction reactions. Dye degradation as well as the conversion of p-nitrophenol to p-aminophenol is catalyzed by the supportless nanorods without light illumination. By depositing the particles onto conductive substrates, the nanostructured electrodes show promising electrocatalytic activity in ethanol oxidation reaction. The nanocatalyst presents excellent morphological stability during all the catalytic test reactions.

Synthesis and characterization of the rare-earth chloride complexes with N,N,N′,N′-tetramethylmalonamide

Exploration of the solid-state chemistry of the f-elements and their coordination chemistry can assist in understanding the speciation of these elements in solution, which, in turn, can aid in the interpretation of their chemical behavior in complex liquid-liquid separations. Within these separation processes, malonamides are common organic extractants that are used for complexing both lanthanides and actinides, thus it is relevant to understand the malonamide ligand complexation under various conditions. In this work, we investigate solid-state complexes of the rare-earth chlorides with N,N,N′,N′-tetramethylmalonamide (TMMA) across the entire lanthanide series. We isolated two structural families of compounds Ln(TMMA)2Cl3 Ln = La–Dy and [Ln(TMMA)2(H2O)4]Cl3 • xH2O x = 0,4 Ln = Ho–Lu, showing differences in chloride coordination from the inner-sphere complex for early lanthanides to outer-sphere for the late lanthanides. Both structural series were additionally analyzed by both IR and Raman spectroscopy confirming similarities in malonamide ligand coordination modes, while showing differences in vibrational features associated with chloride and aqua ligand coordination.

Liquid crystalline behaviors of porphyrin iron(III) chloride complexes with different alkyl chain lengths

Two novel porphyrin liquid crystals were designed and synthesized. Their structures were characterized by NMR, FT-IR, UV-visible, and mass spectroscopies. The liquid crystalline properties were investigated by DSC, POM and XRD analyses. The C[Formula: see text] and C[Formula: see text] alkyl chains porphyrin iron(III) complex (1-2) displayed three liquid crystalline transitions in a wide temperature range. Both long alkyl chain porphyrin iron(III) complexes were exhibited a columnar mesophase type.

Trace Element Partitioning Between Saline Aqueous Fluids and Subducted Metasediments, and the Origin of the “Sediment Fingerprint” in Arc Magmas

AbstractIsotopic and elemental signatures in arc magmas bear similarities to marine sediments from the forearc. Partial melts of subducted sediments were previously invoked as the predominant carrier of material between the slab and mantle wedge, whereas aqueous fluids were deemed too inefficient at mobilizing trace elements to account for arc magma compositions. However, trace element solubility in aqueous fluids may be significantly affected by the formation of chloride complexes. We introduced NaCl into the sediment‐H2O system, and re‐investigated trace element partitioning between aqueous fluids and metasediments in a series of piston cylinder experiments at 2.5–4.5 GPa and 600–700°C. The diamond trap method was employed to separate the fluids, which were analyzed in the frozen state. Trace element compositions of fluids and all solid phases were obtained by LA‐ICP‐MS. We combined our data with published literature to demonstrate that saline fluids and sediment melts have a comparable efficiency in extracting incompatible elements from subducted sediments, producing similar element fractionation during mobile phase expulsion. Accessory phases such as allanite may only be stable in particularly Rare Earth Elements‐enriched lithologies. The Sr, Pb and Nd isotopic signatures of arc magma suggest that the mantle wedge is infiltrated by mobile phases derived from both the sediment and basalt sections of the subducted oceanic crust. Up to several percent of either sediment‐derived saline fluid or melt can account for the isotopic and elemental compositions of most arc magma. Geochemical similarities between arc magma and forearc sediments are not necessarily evidence of slab melting.

Novel N3-Schiff base and its zinc halide/pseudohalide complexes: Antimicrobial, antioxidant, cytotoxicity and burn wound healing activities

A new N3-tridentate Schiff base ligand(L) was synthesized by condensation reaction of 2-methoxycinnamaldehyde and diethylenetriamine. Thereafter some new zinc complexes formulated as [ZnLX2] (X is halide or pseudo-halide) were prepared using this chelating ligand. The suggested structures of these compounds were identified by melting point and molar conductivity measuring, UV–Visible, FT/IR, 1H and 13C NMR and MASS spectral analyses. Moreover, the thermal behaviors of the ligand and zinc complexes were investigated under N2 atmosphere and at a heating rate of 20 °C/min. Zinc bromide and chloride complexes were synthesized in nanostructured sizes by sonochemical method and used as precursor to prepare nanostructured ZnO approved by SEM, EDX and XRD analyzes. Furthermore antibacterial, antifungal and antioxidant properties were evaluated by well diffusion, ferric reducing antioxidant power (FRAP) and 2, 2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) methods respectively. Cytotoxicity properties of the ligand and zinc complexes were assessed against prostate cancerous cell lines (PC3) as compared with HUVEC normal cells. The morphology of PC3 cancer cells treated by the ligand and some zinc complexes were also visualized by images. Eventually, burn wound healing activities of the ligand and zinc chloride complex were examined for healing of the second degree burns in the rats in a period of 20 days.

Tridentate NacNac Tames T-Shaped Nickel(I) Radical.

The reaction of a nickel(II) chloride complex containing a tridentate β-diketiminato ligand with a picolyl group [2,6-iPr2 -C6 H3 NC(Me)CHC(Me)NH(CH2 py)]Ni(II)Cl (1)] with KSi(SiMe3 )3 conveniently afforded a nickel(I) radical with a T-shaped geometry (2). The compound's metalloradical nature was confirmed through electron paramagnetic resonance (EPR) studies and its reaction with TEMPO, resulting in the formation of a highly unusual three-membered nickeloxaziridine complex (3). When reacted with disulfide and diselenide, the S-S and Se-Se bonds were cleaved, and a coupled product was formed through carbon atom of the pyridine-imine group. The nickel(I) radical activates dihydrogen at room temperature and atmospheric pressure to give the monomeric nickel hydride.

Rhenium fac-Tricarbonyl Bisimine Chalcogenide Complexes: Synthesis, Photophysical Studies, and Confocal and Time-Resolved Cell Microscopy.

We describe the preparation, characterization, and imaging studies of rhenium carbonyl complexes with a pyta (4-(2-pyridyl)-1,2,3-triazole) or tapy (1-(2-pyridyl)-1,2,3-triazole)-based heteroaromatic N∧N ligand and thiolate or selenoate X ligand. The stability and photophysical properties of the selenolate complexes are compared with parent chloride complexes and previously described analogues with benzenethiolate ligands. Two complexes were imaged in A549 cells upon excitation at 405 nm. Colocalization studies suggest a lysosomal accumulation, while one parent chloride complex was described to localize at the Golgi apparatus. Preliminary fluorescence lifetime measurements and imaging demonstrate potential for application in time-resolved microscopy techniques due to the long and variable lifetimes observed in cellular environments, including an increase in lifetime between the solution and solid state many times larger than previously reported.

Gold(I) Chloride Complexes with 4-Halo-Substituted Phenyl Isocyanide Ligands

Gold(I) Chloride Complexes with 4-Halo-Substituted Phenyl Isocyanide Ligands

Interplay between anion-receptor and anion-solvent interactions in halide receptor complexes characterized with ultrafast infrared spectroscopies.

The competition between host-guest binding and solvent interactions is a crucial factor in determining the binding affinities and selectivity of molecular receptor species. The interplay between these competing interactions, however, have been difficult to disentangle. In particular, the development of molecular-level descriptions of solute-solvent interactions remains a grand experimental challenge. Herein, we investigate the prototypical halide receptor meso-octamethylcalix[4]pyrrole (OMCP) complexed with either chloride or bromide anions in both dichloromethane (DCM) and chloroform (trichloromethane, TCM) solvent using ultrafast infrared transient absorption and 2D IR spectroscopies. OMCP·Br- complexes in both solvents display slower vibrational relaxation dynamics of the OMCP pyrrole NH stretches, consistent with weaker H-bonding interactions with OMCP compared to chloride and less efficient intermolecular relaxation to the solvent. Further, OMCP·Br- complexes show nearly static spectral diffusion dynamics compared to OMCP·Cl-, indicating larger structural fluctuations occur within chloride complexes. Importantly, distinct differences in the vibrational spectra and dynamics are observed between DCM and TCM solutions. The data are consistent with stronger and more perturbative solvent effects in TCM compared to DCM, despite DCM's larger dielectric constant and smaller reported OMCP·X- binding affinities. These differences are attributed to the presence of weak H-bond interactions between halides and TCM, in addition to competing interactions from the bulky tetrabutylammonium countercation. The data provide important experimental benchmarks for quantifying the role of solvent and countercation interactions in anion host-guest complexes.

Synthesis of luminescent coumarin-substituted phosphinoamide-bridged polynuclear gold(i) metallacycles and reactivity studies

In this work, coumarin-substituted phosphinoamine gold(i) chloride complexes were synthesized. Further reactions with KOtBu led to isolation of unexpected cyclic rings, which were investigated for their luminescence properties and reactivity.