Chitosan Research Articles

The adsorption and separation of tungsten and molybdenum by chitosan and chitosan-D301: Experiments and DFT theoretical calculation

The adsorption and separation of tungsten and molybdenum are important for efficient recycling of W-Mo resources, which requires green and efficient adsorbents. In this paper, Chitosan (CS)-D301 material was obtained by impregnation method and was applied to adsorb and separate W and Mo in solutions. The adsorption optimization results indicated that W was adsorbed by CS-D301, the separation factor of W/Mo increased to 26.45 compared with that of CS 21.34. The desorption efficiency was still above 94 % after five adsorption–desorption cycles. FT-IR, XPS and DFT theoretical calculations indicated that the surface group N+-R of CS-D301 showed more affinity for W, making it easier to selectively adsorb W over Mo than CS only. N was the surface-active adsorption site, and the adsorption process belonged to chemical adsorption with an adsorption energy of Eads = −957.64 kcal/mol. CS-D301 was expected to become green adsorbent for efficient separation of W and Mo to support resource recovery, protection and sustainable development.

Cotton-like antibacterial polyacrylonitrile nanofiber-reinforced chitosan scaffold: Physicochemical, mechanical, antibacterial, and MC3T3-E1 cell viability study

Bio-scaffolds, while mimicking the morphology of native tissue and demonstrating suitable mechanical strength, enhanced cell adhesion, proliferation, infiltration, and differentiation, are often prone to failure due to microbial infections. As a result, tissue engineers are seeking ideal scaffolds with antibacterial properties. In this study, silver nanoparticles (AgNPs) were integrated into cotton-like polyacrylonitrile nanofibers via a polydopamine (PDA) interlayer (Ag@p-PAN). These Ag@p-PAN nanofibers were then incorporated into the chitosan (CS) matrix, developing an antibacterial CS/Ag@p-PAN composite scaffold. The composite scaffold features an interconnected porous morphology with fiber-infused pore walls, improved water absorption and swelling properties, a controlled degradation profile, enhanced porosity, better mechanical strength, strong antibacterial properties, and excellent MC3T3-E1 cell viability, adhesion, proliferation, and infiltration. This study presents a novel method for reinforcing CS-based scaffolds by incorporating bioactive nanofibers, offering potential applications in tissue engineering and other biomedical fields.

Exploring the antimicrobial efficacy of tea tree essential oil and chitosan against oral pathogens to overcome antimicrobial resistance

BackgroundConsidering that antimicrobial resistance among oral pathogens is a significant concern in dental practice, with broader implications for overall health due to the oral microbiota serving as a reservoir for antibiotic resistance genes (ARGs), research into natural products is crucial for addressing this issue. ObjectiveThis study aimed to evaluate tea tree oil (TTO) and chitosan (CH) performance against oral pathogens, including mixed-species biofilm, and its effects on bacteria growth, in addition to chemical characterization and cytotoxicity of TTO. MethodsTea Tree Oil and low molecular weight chitosan were used in this study. The chemical composition of TTO was analyzed using gas chromatography coupled with mass spectrometry (GC-MS). To evaluate TTO's antimicrobial properties, time-kill and cell viability assays were conducted. Additionally, minimum inhibitory concentration (MIC), minimum microbiocidal concentration (MMC), checkerboard, and biofilm assays were performed using TTO and CH alone and in combination. ResultsTTO chromatography peaks found consistent with the standard ISO4730:2017 and literature. TTO and CH exhibited inhibitory activity against all tested microorganisms. The predominantly microbiostatic activity of TTO is probably related to terpinen-4-ol associated with terpinene. The oil at MIC value was able to delay the log phase of Aggregatibacter actinomycetemcomitans growth. Fibroblasts (L929) viability remained above 70 % during 24 h for TTO concentrations ranging from 0.5 to 0.0625 mg/ml. TTO-CH combination showed a synergistic activity (FIC = 0.5) against A. actinomycetemcomitans and Streptococcus sanguinis, at a concentration of 0,25MIC for both species. The compounds at MIC concentration inhibited both monospecies and mixed-species biofilms studied bacteria to the same extent as the azithromycin control. ConclusionTTO and CH demonstrated efficacy in combating oral pathogens and TTO-CH combination offers a promising approach to confront microbial resistance in the oral environment.

Development of Chitosan-Coated Graphene Oxide and Iron Oxide Nanocomposites for Targeted Delivery of Camptothecin to Liver Cancer Cells.

Innovative drug delivery platforms for selective, regulated, and sustained release of anticancer drugs are crucial in cancer treatment. This study presents nanoparticles developed from chitosan (CS), graphene oxide (GO), and magnetite (Fe3O4), and their nanocomposites, to enhance the loading and release efficiency of camptothecin (CPT). Nanostructures were characterized using imaging microscopy, FT-IR, and X-ray diffraction, with an average crystallite size of 5.5 nm. Camptothecin binding proportions were 70% for CS, 81% for CS@Fe3O4, 58% for CS@GO, and 74% for CS@GO/Fe3O4. At pH 5.0, CPT release ratios were 87%, 80%, 88%, and 90%, respectively, and at pH 7.4, 84%, 72%, 89%, and 87%. Cytotoxicity was assessed using the MTT assay against HepG2 and SMMC-7721 cancer cells. CPT-CS@GO/Fe3O4 exhibited the highest survival at 5 µM and 12.5 µM concentrations, indicating it as the most effective nanocarrier for camptothecin delivery. The study demonstrates CS@GO/Fe3O4's potential as a superior drug delivery system.

Effects of Chitosan-Based Additive on Rumen Fermentation and Microbial Community, Nutrients Digestibility and Lactation Performance in Goats.

Recently, the potential of using chitosan (CHI) as a feed additive to enhance ruminal fermentation and improve animal performance has gained increasing attention in ruminant nutrition. This study was undertaken to investigate the effect of dietary supplementation with increasing doses of CHI on rumen fermentation attributes and microbial composition, digestibility and milk performance in Dhofari goats. Twenty-four lactating goats (27 ± 1.8 kg of initial live body weight) were fed a control diet comprising of Rhodes grass hay plus a concentrate feed mixture. Goats were assigned to one of three experimental treatments (n = 8 per treatment) as: (1) control diet with no supplement (CTRL), (2) control diet with 0.300 g/day CHI (CHI0.3) and (3) control diet supplemented with 0.600 g/day CHI (CHI0.6) for a 45-day experimental period. Dietary supplementation with increasing doses of CHI decreased (p < 0.05) linearly ruminal pH (p = 0.023), total short chain fatty acids concentrations (p = 0.011), acetate (p = 0.013) and butyrate (p = 0.042) proportions, acetate to propionate ratio (p < 0.001), estimated methane (CH4) production (p < 0.001), ammonia nitrogen concentrations (p = 0.003) and protozoa abundance (p = 0.003). However, the ruminal propionate proportion augmented (p = 0.002) linearly with increasing doses of CHI in the diet. Increasing doses of CHI linearly increased the abundance of the ruminal propionate-producing bacteria, while diminished acetate and CH4-producing bacteria (p < 0.05). Serum total protein (p = 0.037) and glucose (p = 0.042) levels linearly increased as CHI doses increased in the diet. However, serum UREA levels decreased linearly (p = 0.002) by 21% with increasing CHI amounts in the diet. The digestibility of organic matter, crude protein and neutral detergent fibre increased linearly with the increasing CHI doses (p < 0.05). Neither linear nor quadratic responses (p > 0.05) were observed in daily milk yield and feed efficiency by supplementing the diet with CHI. In conclusion, supplementing the diet with CHI at a dose of 0.600 g/day as a feed additive for dairy goats reduced estimated CH4 generation and improved fibre and protein digestion, with no influence on feed intake, milk yield or composition.

Preparation of biocompatible Zein/Gelatin/Chitosan/PVA based nanofibers loaded with vitamin E-TPGS via dual-opposite electrospinning method

Wound management is a critical aspect of healthcare, necessitating effective and innovative wound dressing materials. Many existing wound dressings lack effectiveness and exhibit limitations, including poor antimicrobial activity, toxicity, inadequate moisture regulation, and weak mechanical performance. The aim of this study is to develop a natural-based nanofibrous structure that possesses desirable characteristics for use as a wound dressing. The chemical analysis confirmed the successful creation of Zein (Ze) (25% w/v) /gelatin (Gel) (10% w/v) /chitosan (CS) (2% w/v) /Polyvinyl alcohol (PVA) (10% w/v) nanofibrous scaffolds loaded with vitamin E tocopheryl polyethylene glycol succinate (Vit E). The swelling percentages of nanofiber (NF), NF + Vit E, cross-linked nanofiber (CNF), and CNF + Vit E were 49%, 110%, 410%, and 676%, respectively; and the degradation rates of NF, NF + Vit E, CNF, and CNF + Vit E were 29.57 ± 5.06%, 33.78 ± 7.8%, 14.03 ± 7.52%, 43 ± 6.27%, respectively. The antibacterial properties demonstrated that CNF impregnated with antibiotics reduced Escherichia coli (E. coli) counts by approximately 27–28% and Staphylococcus aureus (S. aureus) counts by about 34–35% compared to negative control. In conclusion, cross-linked Ze/Gel/CS/PVA nanofibrous scaffolds loaded with Vit E have potential as suitable wound dressing materials because environmentally friendly materials contribute to sustainable wound care and controlled degradation ensures wound dressings breakdown harmlessly.

Development of low-molecular-weight polysaccharide-based wound dressings for full-thickness cutaneous wound healing via coacervate formation

The development of polysaccharide-based wound dressings that are easy to prepare, adhere to tissue, adapt to diverse shapes and exhibit tunable mechanical properties holds significant clinical interest. This study introduced a simple spontaneous liquid-liquid phase separation technique employing low-molecular-weight and high polyion concentration of chitosan (CS) and hyaluronic acid (HA) to fabricate CS/HA coacervates. Upon increasing the molecular weight of chitosan from 7 kDa to 250 kDa, a transition in the CS/HA coacervates from liquid-like state to an elastic liquid and eventually to a solid-like state was observed. The resulting CS/HA coacervates demonstrated robust water resistance and adhesion to skin tissue. Notably, the molecular weight of chitosan significantly influenced the mechanical properties and hydration levels of the CS/HA coacervates. Moreover, in vivo studies using a full-thickness cutaneous defect model revealed that the CS/HA coacervates, prepared using 100 kDa chitosan, markedly accelerate wound healing. The coacervates' ease of preparation, wet adhesion, heterogeneous structure, suitability for irregularly shaped wounds, and exceptional wound healing promotion of the coacervates qualify them as an optimal wound dressing.

Ultra-Pressurized Deposition of Hydrophobic Chitosan Surface Coating on Wood for Fungal Resistance.

Fungi (Neolentinus lepideus, Nl, and Trametes versicolor, Tv) impart wood rot, leading to economic and environmental issues. To overcome this issue, toxic chemicals are commonly employed for wood preservation, impacting the environment and human health. Surface coatings based on antimicrobial chitosan (CS) of high molar mass (145 × 105 Da) were tested as wood preservation agents using an innovative strategy involving ultra-pressurizing CS solutions to deposit organic coatings on wood samples. Before coating deposition, the antifungal activity of CS in diluted acetic acid (AcOOH) solutions was evaluated against the rot fungi models Neolentinus lepideus (Nl) and Trametes versicolor (Tv). CS effectively inhibited fungal growth, particularly in solutions with concentrations equal to or higher than 0.125 mg/mL. Wood samples (Eucalyptus sp. and Pinus sp.) were then coated with CS under ultra-pressurization at 70 bar. The polymeric coating deposition on wood was confirmed through X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM) images, and water contact angle measurements. Infrared spectroscopy (FTIR) spectra of the uncoated and coated samples suggested that CS does not penetrate the bulk of the wood samples due to its high molar mass but penetrates in the surface pores, leading to its impregnation in wood samples. Coated and uncoated wood samples were exposed to fungi (Tv and Nl) for 12 weeks. In vivo testing revealed that Tv and Nl fungi did not grow on wood samples coated with CS, whereas the fungi proliferated on uncoated samples. CS of high molar mass has film-forming properties, leading to a thin hydrophobic film on the wood surface (water contact angle of 118°). This effect is mainly attributed to the high molar mass of CS and the hydrogen bonding interactions established between CS chains and cellulose. This hydrophobic film prevents water interaction, resulting in a stable coating with insignificant leaching of CS after the stability test. The CS coating can offer a sustainable strategy to prevent wood degradation, overcoming the disadvantages of toxic chemicals often used as wood preservative agents.

The Effect of Multilayer Nanoemulsion on the In Vitro Digestion and Antioxidant Activity of β-Carotene.

The objectives of this study were to design multilayer oil-in-water nanoemulsions using a layer-by-layer technique to enhance the stability of β-carotene and evaluate its effect on in vitro release and antioxidant activity. To prepare β-carotene-loaded multilayer nanoemulsions (NEs), a primary NE (PRI-NE) using Tween 20 was coated with chitosan (CS) for the secondary NE (SEC-CS), and with dextran sulfate (DS) and sodium alginate (SA) for the two types of tertiary NEs (TER-DS, TER-SA). The multilayer NEs ranged in particle size from 92 to 110 nm and exhibited high entrapment efficiency (92-99%). After incubation in a simulated gastrointestinal tract model, the release rate of free fatty acids decreased slightly after coating with CS, DS, and SA. The bioaccessibility of β-carotene was 7.02% for the PRI-NE, 7.96% for the SEC-CS, 10.88% for the TER-DS, and 10.25% for the TER-SA. The 2,2-diphenyl-1-picrylhydrazyl radical scavenging abilities increased by 1.2 times for the multilayer NEs compared to the PRI-NE. In addition, the cellular antioxidant abilities improved by 1.8 times for the TER-DS (87.24%) compared to the PRI-NE (48.36%). Therefore, multilayer nanoemulsions are potentially valuable techniques to improve the stability, in vitro digestion, and antioxidant activity of β-carotene.

Colorimetric chitosan/polyvinyl alcohol composite membrane incorporated with anthocyanins as pH indicator for monitoring fish freshness

AbstractDuring storage, food undergoes transformations, often producing volatile nitrogen compounds known as total volatile basic nitrogen (TVB‐N), which serves as an indicator of food freshness. In this study, chitosan (CTS) was blended with polyvinyl alcohol (PVA) and incorporated with anthocyanins (ACNs) to monitor the quality changes in fish fillets over different time intervals. The results demonstrated that the presence of PVA in the CTS membrane enhanced light transmittance and reduced water absorption due to the reinforcement of the membrane structure through chemical interactions. In the freshness monitoring experiments, the CTS/PVA membranes exhibited an improved value of total color difference (ΔE), facilitating better detection of pH changes of the surrounding environment. Moreover, the ΔE value of the CTS/PVA film was observed to be quite similar to the value at pH 9 after 24 h and at pH 11 after 36 h when the fish fillet was stored at 25°C. In contrast, the ΔE value of the CTS/PVA film closely matched the value at pH 11 after 96 h of storage at 4°C. Additionally, the correlation between the generated TVB‐N and the ΔE values indicated a higher correlation coefficient (R2) for the composite membranes compared to the pristine CTS or PVA membranes.

Fabrication, characterization and simulated gastrointestinal digestion of sea buckthorn pulp oil microcapsule: effect of wall material and interfacial bilayer stabilization.

Sea buckthorn (Hippophae rhamnoides L.) pulp oil is rich in functional components; however, low water solubility and stability limit its applications. This study fabricated sea buckthorn pulp oil microcapsules using whey protein isolate (WPI), soy protein isolate (SPI), sodium caseinate (NaCN), gum arabic (GA), starch sodium octenylsuccinate (OSAS) and SPI mixed with chitosan (CHI). The influences of these wall materials on physicochemical properties, release behavior and digestibility were explored. Protein-based wall materials (WPI, NaCN, SPI) demonstrated lower bulk densities due to their porous structures and larger particle sizes, while GA and OSAS produced denser microcapsules. Encapsulation efficiency was the highest for protein-based microcapsules (79.41-89.12%) and the lowest for GA and OSAS. The surface oil percentage of protein-based microcapsules (1.41-4.40%) was lower than that of the other microcapsules. Protein-based microcapsules showed concave and cracked surfaces, while GA and OSAS microcapsules were spherical and smooth. CHI improved reconstitution performance, leading to faster dissolution. During simulated gastrointestinal digestion, protein-based microcapsules released more free fatty acids (FFAs) in the intestinal phase, while CHI-modified SPI microcapsules showed a delayed release pattern due to thicker walls. Protein-based wall materials were more effective for sea buckthorn pulp oil microencapsulation, providing higher encapsulation efficiency, better flow properties and releasing more FFAs. The addition of CHI led to the layer-by-layer self-assembly of the microcapsule wall and resulted in sustained release during in vitro intestinal digestion. These findings suggested the potential of protein-based microcapsules for targeted delivery and improved applications of bioactive oils in the food industry. © 2024 Society of Chemical Industry. Published by John Wiley & Sons Ltd.

Environmentally friendly screen-printed electrodes for the selective detection of 4-bromo-2,5-dimethoxyphenethylamine (2C-B) in forensic analysis.

In response to the growing need for sustainable analytical methods, this study explores the repurposing of screen-printed electrodes (SPEs) that would otherwise be discarded. This involves recoating the working electrode surface with a graphite (Gr) and chitosan (CTS) dispersion, creating a reusable SPE (SPE-Gr/CTS). Demonstrating its utility, SPE-Gr/CTS was employed for the detection of 4-bromo-2,5-dimethoxyphenethylamine (2C-B), a phenylethylamine commonly used for recreational proposes. Identifying 2C-B in fluid oral and seized samples is of great interest for forensic and toxicological applications. The 2C-B detection using SPE-Gr/CTS was optimized in Britton-Robinson buffer solution (0.1 mol L-1) at pH 2.0, employing square-wave adsorptive stripping voltammetry. The electrochemical behavior of 2C-B on SPE-Gr/CTS exhibited one irreversible oxidation and a reversible redox process. The proposed method presented a dynamic linear range for 2C-B determination (0.05 to 7.5 μmol L-1) with a low LOD (0.015 μmol L-1). Moreover, the stability of 2C-B electrochemical responses on SPE-Gr/CTS was confirmed using the same or different electrodes (N = 3), with a relative standard deviation of less than 5.0%. Interference studies with seventeen other illicit drugs and adulterants demonstrated that the proposed method is selective for 2C-B detection even in the presence of these substances. Real seized and oral fluid samples containing 2C-B were analyzed using this method, and the results were confirmed by LC-MS. The proposed device demonstrates to be an environmentally friendly and selective sensor for 2C-B detection in forensic analysis, offering a rapid and straightforward screening method for seized and biological samples. In addition, a portable and sensitive determination of 2C-B in forensic samples is presented with minimal sample consumption (50 μL).

Mannose coated selenium nanoparticles normalize intestinal homeostasis in mice and mitigate colitis by inhibiting NF-κB activation and enhancing glutathione peroxidase expression

Impaired intestinal homeostasis is a major pathological feature of inflammatory bowel diseases (IBD). Mannose and selenium (Se) both demonstrate potential anti-inflammatory and anti-oxidative properties. However, most lectin receptors bind free monosaccharide ligands with relatively low affinity and most Se species induce side effects beyond a very narrow range of dosage. This has contributed to a poorly explored therapies for IBD that combine mannose and Se to target intestinal epithelial cells (IECs) for normalization gut homeostasis. Herein, a facile and safe strategy for ulcerative colitis (UC) treatment was developed using optimized, mannose-functionalized Se nanoparticles (M-SeNPs) encapsulated within a colon-targeted hydrogel delivery system containing alginate (SA) and chitosan (CS). This biocompatible nanosystem was efficiently taken up by IECs and led to increased expression of Se-dependent glutathione peroxidases (GPXs), thereby modulating IECs’ immune response. Using a mouse model of DSS-induced colitis, (CS/SA)-embedding M-SeNPs (C/S-MSe) were found to mitigate oxidative stress and inflammation through the inhibition of the NF-kB pathway in the colon. This stabilized mucosal homeostasis of IECs and ameliorated colitis-related symptoms, thereby providing a potential new approach for treatment of IBD.

Biosafe Cu-MOF loaded chitosan/gelatin-based multifunctional packaging film for monitoring shrimp freshness

As living standards improve, the demand for food freshness has gradually increased. Multifunctional packaging materials that monitor food freshness in real-time, delay spoilage, and are environmentally friendly have emerged as ideal solutions. This study synthesized an ammonia-sensitive copper-based metal-organic framework (Cu-MOF) and incorporated it into a matrix composed of chitosan (CS) and gelatin (Gel). The resulting film exhibits ammonia-sensitive color-changing properties, antibacterial activity, and excellent biodegradability. The effects of Cu-MOF incorporation on the structural, physical, and functional properties of the CS/Gel films were systematically evaluated. Results demonstrated that the Cu-MOF was uniformly distributed within the CS/Gel matrix, significantly enhancing the mechanical properties (tensile strength increased by 68.49%), oxygen/water vapor barrier properties, and UV-blocking capability of the films. Notably, the CS/Gel@Cu-MOF films exhibited excellent antibacterial performance, with sterilization rates of 94.2% against Escherichia coli and 99.6% against Staphylococcus aureus. Additionally, the films showed good biocompatibility, biodegradability, and a sensitive color response to ammonia. The films were successfully used to monitor shrimp freshness through color change, transitioning from light green to brown as spoilage occurred. These findings indicate that CS/Gel@Cu-MOF films have significant potential for real-time visual freshness monitoring in food packaging, contributing to reduced food safety risks and waste.

Preparation of magnetic chitosan/polyaniline nanocomposite for efficient remediation of nitrate and phosphate from water

A gel comprising of N-(2-hydroxyethyl)acrylamide (HEAAm), N,N’-methylenebis(acrylamide) (MBA), chitosan (CS), and polyaniline (PANI) made through microwave irradiation was evaluated for effective removal of nitrate and phosphate from water. The material was transformed into a nanocomposite by incorporation of magnetite (Fe3O4) nanoparticles. The nitrate and phosphate removal capacity of the nanocomposite was also evaluated in order to understand the effect of the presence of Fe3O4 on the adsorption efficiency of the gel. The nanocomposite exhibited enhanced adsorption capacity of 55.24 mg g−1 towards nitrate when compared to the value of 44.5 mg g−1 for the neat gel without nanoparticles. Also, the phosphate removal was enhanced from 51.4 to 60.60 mg g−1 due to the presence of Fe3O4 nanoparticles. The enhanced adsorption capacity of the nanocomposite is attributed to the increased surface area of the adsorbent (32.53 m2 g−1) arising from the contribution of the Fe3O4 nanoparticles embedded in the polymer matrix; as evidenced by surface area measurements. The superparamagnetic nature of the nanocomposite arising due to the presence of magnetite nanoparticles facilitates easy removal of the adsorbent after use during purification process. The mechanism of adsorption is confirmed to be the electrostatic interaction between the active sites on the nanocomposite and the adsorbate anions as indicated by XPS studies. The extent of adsorption and desorption as indicated by % desorption data and adsorption capacity values remained unchanged for about 5 cycles indicating the reusability potential of the material.

Protective effects of the exogenous application of salicylic acid and chitosan on chromium-induced photosynthetic capacity and osmotic adjustment in Aconitum napellus.

Chitosan (CTS) is recognized for enhancing a plant's resilience to various environmental stresses, such as salinity and drought. Moreover, salicylic acid (SA) is acknowledged as a growth regulator involved in addressing metal toxicity. However, the effectiveness of both compounds in mitigating Cr-induced stress has remained relatively unexplored, especially in the case of Aconitum napellus, a medicinally and floricultural important plant. Therefore, the primary objective of this study was to investigate the potential of CTS and SA in alleviating chromium (Cr)-induced stress in A. napellus. To address these research questions, we conducted a controlled experiment using potted plants to evaluate the individual and combined impacts of CTS and SA on plants exposed to Cr stress. Foliar application of CTS (0.4g/L) or SA (0.25 mmol/L) led to significant improvements in the growth, chlorophyll content, fluorescence, and photosynthetic traits of A. napellus plants under Cr stress. The most notable effects were observed with the combined application of CTS and SA, resulting in increases in various morphological parameters, such as shoot length (2.89% and 7.02%) and root length (27.75% and 3.36%) under the Cr 1 and Cr 2 treatments, respectively. Additionally, several physiological parameters, such as chlorophyll a (762.5% and 145.56%), chlorophyll b (762.5% and 145.56%), carotenoid (17.03% and 28.57%), and anthocyanin (112.01% and 47.96%) contents, were notably improved under the Cr 1 and Cr 2 treatments, respectively. Moreover, the combined treatment of CTS and SA improved the fluorescence parameters while decreasing the levels of enzymatic antioxidants such as catalase (27.59% and 43.79%, respectively). The application also notably increased osmoprotectant parameters, such as the total protein content (54.11% and 20.07%) and the total soluble sugar content (78.17% and 49.82%) in the leaves of A. napellus in the Cr 1 and 2 treatments, respectively. In summary, these results strongly suggest that the simultaneous use of exogenous CTS and SA is an effective strategy for alleviating the detrimental effects of Cr stress on A. napellus. This integrated approach opens promising avenues for further exploration and potential implementation within agricultural production systems.

Electroanalytical detection of fruit ethylene by a novel electroactive biosensing membrane

Purpose This study aims to present an innovative approach to detect and monitor ethylene gas during fruit ripening. Design/methodology/approach It uses a specialized composite membrane in conjunction with a solid-state electrochemical method. This unique electroactive membrane, composed of polyvinyl alcohol (PVA), chitosan (CHT), lithium chloride (LiCl) and ammonium molybdate (AMO), exhibits synergistic behavior when applied to a microelectrode chip surface. This composite enhances the sensitivity of electrochemical ethylene detection. Empirical experiments were conducted to elucidate the ripening kinetics in various fruit specimens, including apples, pears and mangoes. These fruits released ethylene, which was analyzed using the molybdenum-permeated electroactive biopolymer composite membrane, a critical determinant of ethylene levels. Findings Characterization of the synthesized composite through techniques such as X-ray diffraction and Fourier-transform infrared spectroscopy revealed reduced crystallinity and decreased hydrogen bond interactions upon activation with Mo ions. Field emission scanning electron microscopy images exhibited a distinctive porous surface morphology with spherical microgranules. Energy dispersive X-ray analysis indicated a significant change in the mass or atomic composition of Mo in the composite membrane after Mo ion activation. Electrochemical measurements, including cyclic voltammetry and potentiostatic electrochemical impedance spectroscopy, validated the efficiency of the Mo-activated PVA-CHT-LiCl-AMO membrane, manifesting an impressive 87.79% increase in sensitivity compared to the nonactivated membrane. Practical implications This research work represents a significant advancement in the field of ethylene detection and fruit ripening monitoring. The Mo-activated PVA-CHT-LiCl-AMO membrane offers a reliable and effective solution for real-time ethylene detection, providing an invaluable tool for the horticultural industry to optimize fruit ripening processes, extend shelf life and ensure the delivery of high-quality produce to consumers. Social implications The findings of this study hold great promise for fostering sustainability and efficiency within the global fruit supply chain, ultimately benefiting both producers and consumers alike. Originality/value The implications of this research extend to the fabrication of a sensor based on a solid-state electroactive PVA-CHT-LiCl-AMO composite membrane, which upon Mo-activation exhibits robust electrochemical fruit ethylene detection when exposed to different fruits.

Chitosan, Alginate and Polyethylene Glycol Capped Zinc Oxide Nanoparticles for Hyperthermia Applications

Functional oxides have been very ingeniously used for diverse applications, recently in biomedical applications. Among the functional oxides, zinc oxide nanoparticles (ZnONPs) have proven to be exceptional for biomedical applications. Chitosan (CS), alginate (Alg) and polyethylene glycol (PEG) have been explored in the synthesis of ZnONPs as potential capping agents for hyperthermia applications. X-rays diffraction (XRD), UV-visible spectroscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and Vibrating sample magnetometry (VSM) techniques have been used to analyze the crystallinity, absorbance, morphology and magnetic properties of the samples, respectively. In our research described here the hyperthermia analyses of ZnONPs and PEG, CS and Alg capped ZnONPs were conducted under an applied field of 180 Oe. The results indicated that the samples could reach elevated temperatures that fall within the therapeutic range. A high specific absorbance degree (SAR) was obtained for the capped samples when compared with the pristine sample, making them more suitable for hyperthermia applications.

An improved amperometric cholesterol biosensor based on cholesterol oxidase nanostructures for pre-diagnosis of myocardial infarction

Cholesterol plays a pivotal role in human health, serving as a crucial biomarker for cardiovascular diseases, including myocardial infarction. This study presents the development of an innovative amperometric cholesterol biosensor that enhances the detection and quantification of cholesterol levels in serum. The biosensor integrates cholesterol oxidase (ChOx) nanoparticles with a modified electrode, leveraging the unique properties of platinum nanoparticles (PtNPs) and graphene nanosheets (GNs) to improve sensitivity and stability. The synthesis of PtNPs was achieved using Camellia sinensis extract, while graphene oxide was reduced to form GNs. At 2.39 mg/mL or above is deemed a biomarker for cardiovascular disorders, peripheral artery disease, heart attack, diabetes mellitus, strokes, and hypertension. The monitoring of serum cholesterol level is therefore very significant. In the present study, an innovative amperometric cholesterol biosensor was constructed by immobilizing nanoparticles of cholesterol oxidase onto a pencil graphite (PG) electrode modified with graphene nanosheets (GNs), platinum nanoparticles (PtNPs), and chitosan (CHIT). At various stages of construction, the modified electrode was characterized by employing electrical impedance spectroscopy (EIS) and cyclic voltammetry (CV), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) spectroscopy. The biosensor responded best when run at 0.14Vs-1 at optimal pH and temperature of 8.0 and 35°C respectively. The biosensor has a wide linear range (0.1mg/mL-7.5 mg/mL), with great sensitivity (0.89 mA cm−1mgmL−1) and a low limit of detection (0.97 mg/mL). This research not only contributes to the field of biosensing but also offers a promising tool for the early diagnosis of cholesterol-related health issues, paving the way for enhanced cardiovascular disease management.

Chitosan-based anion exchange membranes for fuel cell application: Enhanced hydration & durability to dry-wet cycling

Herein, a new type of anion exchange membranes (AEMs) based on chitosan (CS) and poly(4-vinylbenzyl chloride) (PVB) polymers is reported. Depending on whether the PVB side chains are mono-cationic (quaternized PVB, QPVB) or di-cationic (di-quaternized PVB, DQPVB), the AEMs are denoted as QPVB@CS and DQPVB@CS, respectively. Due to the lateral aggregation of chitosan chains assisted by hydrogen bonds, the in-plane expansion is limited (1.4–11.5 % at 80 °C), resulting in excellent mechanical properties of AEMs (dry tensile strength of 55.2–81.0 MPa). And after 10 dry-wet cycles, the AEMs maintain their appearance and show improved mechanical properties. Due to high through-plane swelling degree, AEMs effectively retaining water (water uptake of 272.5–501.5 % at 80 °C) in the AEMs. DQPVB@CS AEMs, with their higher ion content, exhibit superior ionic conductivity (74.2–116.5 mS cm−1 at 80 °C) compared to QPVB@CS (27.7–44.3 mS cm−1 at 80 °C) and achieve a peak power density of 729.6 mW cm−2 in an anion exchange membrane fuel cell (AEMFC), versus 128.1 mW cm−2 for QPVB@CS-2. To the best of our knowledge, the AEMs developed in this study represent the first example of AEMs prepared from chitosan gel membranes, achieving anisotropic swelling degree, high water uptake, and excellent dry-wet cycling resistance without the need for additional chemical cross-linking.