Chiral Amide Research Articles

Enantioselective Synthesis of Chiral Amides by a Phosphoric Acid Catalyzed Asymmetric Wolff Rearrangement**

AbstractThe enantioselective addition of potent nucleophiles to ketenes poses challenges due to competing background reactions and poor stereocontrol. Herein, we present a method for enantioselective phosphoric acid catalyzed amination of ketenes generated from α‐aryl‐α‐diazoketones. Upon exposure to visible light, the diazoketones undergo Wolff rearrangement to generate ketenes. The phosphoric acid not only accelerates ketene capture by amines to form a single configuration of aminoenol intermediates but also promotes an enantioselective proton‐transfer reaction of the intermediates to yield the products. Mechanistic studies elucidated the reaction pathway and explained how the catalyst expedited the transformation and controlled the enantioselectivity.

Towards Efficient Synthesis of Chiral β-Amino Amides via Organocatalysis

Key words multicomponent - organocatalysis - amino amides - Brønsted acid - Ugi reaction - ynamides

Enantio-selective molecularly imprinted β-resorcylic acid-modified resin for chiral separation of cathinone

This article explains the development of an enantioselective durable material that is based on a cross-linked β-resorcylic acid-resorcinol-formaldehyde copolymer for the chiral recognition of S-cathinone (CTN) and the effective enantioseparation of the (±)-CTN racemic mixture. In a first step, a polymerizable S-CTN-β-resorcylic acid amide was produced and characterized through elemental analysis, Fourier transform infrared (FTIR), and nuclear magnetic resonance (NMR) spectroscopy. Thereafter, the obtained chiral amide was copolymerized with resorcinol-formaldehyde by means of acidic condensation polymerization, and the resulting polymeric resin was treated with sodium hydroxide and subsequently HCl to remove the S-CTN template molecules. The molecularly imprinted polymer that was formed was characterized through scanning electron microscopy, FTIR, and energy dispersive X-ray spectroscopy and then tested for selective extraction of S-CTN. Adsorption was carried out in line with the Langmuir model, and the findings showed that the maximum capacity was 205 ± 2 mg/g at a pH of 7. Moreover, the optical separation was performed utilizing a column, with results showing approximate enantiomeric excess values of 65% and 95% inside the supernatant and eluant solutions, respectively, for S- and R-CTN.

Photoactive Yellow Protein Adsorption at Hydrated Polyethyleneimine and Poly-l-Glutamic Acid Interfaces.

Chiral and achiral vibrational sum-frequency generation (VSFG) spectroscopy was performed in the 1400-1700 and 2800-3800 cm-1 range to study the interfacial structure of photoactive yellow protein (PYP) adsorbed on polyethyleneimine (PEI) and poly-l-glutamic acid (PGA) surfaces. Nanometer-thick polyelectrolyte layers served as the substrate for PYP adsorption, with 6.5-pair layers providing the most homogeneous surfaces. When the topmost material was PGA, it acquired a random coil structure with a small number of β2-fibrils. Upon adsorption on oppositely charged surfaces, PYP yielded similar achiral spectra. However, the VSFG signal intensity increased for PGA surfaces with a concomitant redshift of the chiral Cα-H and N-H stretching bands, suggesting increased adsorption for PGA compared to PEI. At low wavenumbers, both the backbone and the side chains of PYP induced drastic changes to all measured chiral and achiral VSFG spectra. Decreasing ambient humidity led to the loss of tertiary structure with a re-orientation of α-helixes, evidenced by a strongly blue-shifted chiral amide I band of the β-sheet structure with a shoulder at 1654 cm-1. Our observations indicate that chiral VSFG spectroscopy is not only capable of determining the main type of secondary structure of PYP, i.e., β-scaffold, but is also sensitive to tertiary protein structure.

Modular enantioselective access to β-amino amides by Brønsted acid-catalysed multicomponent reactions.

β-Amino acids are structural motifs widely found in therapeutic natural products, novel biomimetic polymers and peptidomimetics. As a convergent method, the synthesis of stereoenriched β-amino amides through the asymmetric Mannich reaction requires specialized amide substrates or a metal catalyst for enolate formation. By a redesign of the Ugi reaction, a conceptually different solution to prepare chiral β-amino amides was established using ambiphilic ynamides as two-carbon synthons. The modulation of ynamides or oxygen nucleophiles concisely furnished three classes of β-amino amides with generally good efficiency as well as excellent chemo- and stereo-control. The utility is verified in the preparation of over 100 desired products that bear one or two contiguous carbon stereocentres, including those that directly incorporate drug molecules. This advance also provides a synthetic shortcut to other valuable structures. The amino amides could be elaborated into β-amino acids, anti-vicinal diamines, γ-amino alcohols and β-lactams or undergo transamidation with amino acids and amine-containing pharmaceuticals.

Chiral Skeletons of Mesoporous Silica Nanospheres to Mitigate Alzheimer's β-Amyloid Aggregation.

Chiral mesoporous silica (mSiO2) nanomaterials have gained significant attention during the past two decades. Most of them show a topologically characteristic helix; however, little attention has been paid to the molecular-scale chirality of mSiO2 frameworks. Herein, we report a chiral amide-gel-directed synthesis strategy for the fabrication of chiral mSiO2 nanospheres with molecular-scale-like chirality in the silicate skeletons. The functionalization of micelles with the chiral amide gels via electrostatic interactions realizes the growth of molecular configuration chiral silica sols. Subsequent modular self-assembly results in the formation of dendritic large mesoporous silica nanospheres with molecular chirality of the silica frameworks. As a result, the resultant chiral mSiO2 nanospheres show abundant large mesopores (∼10.1 nm), high pore volumes (∼1.8 cm3·g-1), high surface areas (∼525 m2·g-1), and evident CD activity. The successful transfer of the chirality from the chiral amide gels to composited micelles and further to asymmetric silica polymeric frameworks based on modular self-assembly leads to the presence of molecular chirality in the final products. The chiral mSiO2 frameworks display a good chiral stability after a high-temperature calcination (even up to 1000 °C). The chiral mSiO2 can impart a notable decline in β-amyloid protein (Aβ42) aggregation formation up to 79%, leading to significant mitigation of Aβ42-induced cytotoxicity on the human neuroblastoma line SH-ST5Y cells in vitro. This finding opens a new avenue to construct the molecular chirality configuration in nanomaterials for optical and biomedical applications.

Enzymatic Synthesis of 2-Chloropurine Arabinonucleosides with Chiral Amino Acid Amides at the C6 Position and an Evaluation of Antiproliferative Activity In Vitro

A number of purine arabinosides containing chiral amino acid amides at the C6 position of the purine were synthesized using a transglycosylation reaction with recombinant E. coli nucleoside phosphorylases. Arsenolysis of 2-chloropurine ribosides with chiral amino acid amides at C6 was used for the enzymatic synthesis, and the reaction equilibrium shifted towards the synthesis of arabinonucleosides. The synthesized nucleosides were shown to be resistant to the action of E. coli adenosine deaminase. The antiproliferative activity of the synthesized nucleosides was studied on human acute myeloid leukemia cell line U937. Among all the compounds, the serine derivative exhibited an activity level (IC50 = 16 μM) close to that of Nelarabine (IC50 = 3 μM) and was evaluated as active.

Nickel-Catalyzed, Enantioselective Hydrofluoromethylation of Olefins: Access to Chiral α-Fluoromethylated Amides and Esters

We herein report the nickel-catalyzed enantioselective hydrofluoromethylation of enamides and enol esters with CH2FI as the fluoromethyl source to enable the diversity-oriented synthesis (DOS) of chiral α-fluoromethylated amides as well as esters with features of wide functional group compatibility as well as excellent enantioselectivity. The synthetic value of this protocol was demonstrated by transformations of the resulted α-fluoromethylated amides to different scaffolds including amine, oxazoline, thiazoline, and α-fluoromethylated tetrahydroquinoline.

Enantioconvergent Cu-catalysed N-alkylation of aliphatic amines.

Chiral amines are commonly used in the pharmaceutical and agrochemical industries1. The strong demand for unnatural chiral amines has driven the development of catalytic asymmetric methods1,2. Although the N-alkylation of aliphatic amines with alkyl halides has been widely adopted for over 100 years, catalyst poisoning and unfettered reactivity have been preventing the development of a catalyst-controlled enantioselective version3-5. Here we report the use of chiral tridentate anionic ligands to enable the copper-catalysed chemoselective and enantioconvergent N-alkylation of aliphatic amines with α-carbonyl alkyl chlorides. This method can directly convert feedstock chemicals, including ammonia and pharmaceutically relevant amines, into unnatural chiral α-amino amides under mild and robust conditions. Excellent enantioselectivity and functional-group tolerance were observed. The power of the method is demonstrated in a number of complex settings, including late-stage functionalization and in the expedited synthesis of diverse amine drug molecules. The current method indicates that multidentate anionic ligands are a general solution for overcoming transition-metal-catalyst poisoning.

Co(Salox)‐Catalyzed Enantioselective Reduction of α,β‐Unsaturated Esters

AbstractCo‐Salox complexes are suitable catalysts for the reduction of prochiral α,β‐unsaturated esters. These ligands can be prepared in a single step from available and inexpensive materials, thus representing an easily accessible alternative to previously reported Co‐catalysts. NaBH4 is employed as reducing agent in the presence of EtOH as proton source, leading to the stereoselective formation of chiral esters, amides, and nitriles in up to 99 % yield and 96.5 : 3.5 er. The concentration of the reductant counter cation (Na+) and the solvent polarity have been shown to correlate with reactivity and enantioselectivity, suggesting that a relatively complex mechanistic manifold is in place.

Copper-catalyzed enantioselective 1,4-hydroboration of α,β-unsaturated amides

Chiral borates can undergo various transformations that occur with high stereospecificity, so they are of great significance in asymmetric synthesis. Herein we described a new catalytic system for copper-catalyzed asymmetric conjugate hydroboration of α,β-unsaturated amides. Under the optimal conditions, the reactions proceeded smoothly to afford the corresponding chiral β-hydroxyl amides with up to 96% yield and 84% ee by employing chiral N,P-ligand. The reaction conditions are mild, the operation is simple, and it has good substrate generality.

Conformational Control of ortho-Phenylenes by Terminal Amides.

Control over the folding of oligomers, be it broad induction of a preferred helical handedness or subtle changes in the orientations of individual functional groups, is important for applications ranging from molecular recognition to long-range conformational communication. Here, we report a series of ortho-phenylene hexamers functionalized with achiral and chiral amides at their termini. NMR spectroscopy, taking advantage of 19F labeling, allows multiple conformers to be detected for each compound. In combination with CD spectroscopy and DFT calculations, specific geometries corresponding to each conformer have been identified and quantified. General conclusions about the effect of sterics and the amide linker on conformational behavior have been drawn, revealing some similarities to and key differences from previously reported imines. A model for twist sense control has been developed that is supported by computational models.

Chiral Auxiliary-Directed Site-Selective Deprotonation of the Cubane Skeleton.

The first diastereoselective synthesis of trisubstituted cubanes was achieved using a chiral auxiliary. To establish chirality within the cubane skeleton, at least three substituents must be introduced at the appropriate positions. Ready conversion of cubane carboxylic acid to a chiral amide followed by sequential ortho-selective deprotonations and electrophilic trapping afforded the corresponding 1,2,3-trisubstituted cubanes with high diastereoselectivity. This route opens new possibilities for the preparation of enantio-enriched cubanes.

Enantioselective synthesis of axially chiral carbamates and amides with carbon dioxide via copper catalysis

Enantioselective synthesis of axially chiral carbamates and amides was achieved via copper-catalyzed coupling of cyclic diaryliodonium salts with CO2 and amines. This method features mild conditions, broad substrate scope and excellent enantioselectivity.

Development of an amine transaminase-lipase cascade for chiral amide synthesis under flow conditions

An amine transaminase and a lipase have been immobilised in separated reactors containing EziG polymer-coated controlled porosity glass carrier materials to transform 1-phenoxypropan-2-one into the corresponding (R)-acetamide in organic solvent.

Re-Examining Interaction between Antimicrobial Peptide Aurein 1.2 and Model Cell Membranes via SFG.

Aurein 1.2 (Aur), a highly efficient 13-residue antimicrobial peptide (AMP) with a broad-spectrum antibiotic activity originally derived from the Australian frog skin secretions, can nonspecifically disrupt bacterial membranes. To deeply understand the molecular-level detail of the antimicrobial mechanism, here, we artificially established comparative experimental models to investigate the interfacial interaction process between Aur and negatively charged model cell membranes via sum frequency generation vibrational spectroscopy. Sequencing the vibrational signals of phenyl, C-H, and amide groups from Aur has characteristically helped us differentiate between the initial adsorption and subsequent insertion steps upon mutual interaction between Aur and the charged lipids. The phenyl group at the terminal phenylalanine residue can act as an anchor in the adsorption process. The time-dependent signal intensity of α-helices showed a sharp rise once the Aur molecules came into contact with the negatively charged lipids, indicating that the adsorption process was ongoing. Insertion of Aur into the charged lipids then offered the detectable interfacial C-H signals from Aur. The achiral and chiral amide I signals suggest that Aur had formed β-folding-like aggregates after interacting with the charged lipids, along with the subsequent descending α-helical amide I signals. The above-mentioned experimental results provide the molecular-level detail on how the Aur molecules interact with the cell membranes, and such a mechanism study can offer the necessary support for the AMP design and later application.

Catalytic Efficiency of Primary α-Amino Amides as Multifunctional Organocatalysts in Recent Asymmetric Organic Transformations

Chiral primary α-amino amides, consisting of an adjacent enamine bonding site (Bronsted base site), a hydrogen bonding site (Bronsted acid site), and flexible bulky substituent groups to modify the steric factor, are proving to be extremely valuable bifunctional organocatalysts for a wide range of asymmetric organic transformations. Primary α-amino amides are less expensive alternatives to other primary amino organocatalysts, such as chiral diamines and cinchona-alkaloid-derived primary amines, as they are easy to synthesize, air-stable, and allow for the incorporation of a variety of functional groups. In recent years, we have demonstrated the catalytic use of simple primary α-amino amides and their derivatives as organocatalysts for the aldol reaction, Strecker reaction, Michael tandem reaction, allylation of aldehydes, reduction of N-Aryl mines, opening of epoxides, hydrosilylation, asymmetric hydrogen transfer, and N-specific nitrosobenzene reaction with aldehydes.

Enantioselective Copper-Catalyzed Borylative Amidation of Allenes.

An approach for the copper-catalyzed synthesis of enantioenriched amides bearing an α-stereogenic center is disclosed. This method involves the addition of an allyl copper species to an isocyanate and allows access to α-substituted chiral amides in high yields and high-to-excellent enantioselectivities. The utility of α-vinyl β-boryl amides in synthesis is highlighted by the diversification of products to afford highly useful scaffolds. DFT calculations reveal that the catalyst preferentially coordinates to the oxygen of the isocyanate. Enantiocontrol arises from the steric repulsion between the boryl group and the stereodirecting phenyl of the chiral ligand.

One-Step Regio- and Stereoselective Electrochemical Synthesis of Orexin Receptor Antagonist Oxidative Metabolites.

Synthesis of drug metabolites, which often have complex structures, is an integral step in the evaluation of drug candidate metabolism, pharmacokinetic (PK) properties, and safety profiles. Frequently, such synthetic endeavors entail arduous, multiple-step de novo synthetic routes. Herein, we present the one-step Shono-type electrochemical synthesis of milligrams of chiral α-hydroxyl amide metabolites of two orexin receptor antagonists, MK-8133 and MK-6096, as revealed by a small-scale (pico- to nano-mole level) reaction screening using a lab-built online electrochemistry (EC)/mass spectrometry (MS) (EC/MS) platform. The electrochemical oxidation of MK-8133 and MK-6096 was conducted in aqueous media and found to produce the corresponding α-piperidinols with exclusive regio- and stereoselectivity, as confirmed by high-resolution nuclear magnetic resonance (NMR) characterization of products. Based on density functional theory (DFT) calculations, the exceptional regio- and stereoselectivity for this electrochemical oxidation are governed by more favorable energetics of the transition state, leading to the preferred secondary carbon radical α to the amide group and subsequent steric hindrance associated with the U-shaped conformation of the cation derived from the secondary α-carbon radical, respectively.

Supramolecular Assembly of Edge Functionalized Top-Down Chiral Graphene Quantum Dots.

The construction of supramolecular assemblies of heterogeneous materials at the nanoscale is an open challenge in science. Herein, new chiral graphene quantum dots (GQDs) prepared by amidation reaction introducing chiral amide groups and pyrene moieties into the periphery of GQDs are described. The analytical and spectroscopic data show an efficient chemical functionalization and the morphological study of the supramolecular ensembles using SEM and AFM microscopies reveals the presence of highly ordered fibers of several micrometers length. Fluorescence studies, using emission spectroscopy and confocal microscopy, reveal that the fibers stem from the π-π stacking of both pyrenes and GQDs, together with the hydrogen bonding interactions of the amide groups. Circular dichroism analysis supports the chiral nature of the supramolecular aggregates.