Chemical Groups Research Articles

Chemical composition of Ecstasy tablets seized in Poland between 2005 and 2020.

The most commonly associated substance found in Ecstasy tablets is MDMA (3,4-methylenedioxymethamphetamine). In our study, we showed how the composition of psychoactive ingredients in Ecstasy tablets seized on the drug market in Poland has changed in the years 2005-2020. The study material consisted of nearly 20,000 single Ecstasy tablets seized by representatives of law enforcement (the police, prosecutors) from 2005 to 2020 and analysed by the Institute of Forensic Research, Krakow, Poland. The analysis of the tablets was carried out by gas chromatography-mass spectrometry (GC-MS), high-performance liquid chromatography with diode array detection (HPLC-DAD) and ultra-high-performance liquid chromatography with photodiode array detection (UHPLC-PDA). Currently, new types of MDMA tablets are introduced onto the market, available in various colours and shapes. Our study showed that tablets sold on the street as Ecstasy have variable purity and sometimes contain little or no MDMA. The mean content of MDMA in one tablet seized in 2005-2011 decreased from 90 to 50mg. In 2013, Ecstasy tablets with a very high MDMA content (average 195mg per tablet) appeared on the market, but in the next 2years, the MDMA content decreased again. From 2016, the average MDMA content began to rise again, ranging from 60 to 280mg. Tablets sold as Ecstasy also contained completely different psychoactive substances, including new psychoactive substances (NPS) (found in almost 20% of all examined tablets sold as Ecstasy) belonging to different chemical groups or their dangerous combinations (i.e. phenylethylamines, piperazines, tryptamines, cathinones, arylalkylamines, arylcyclohexylamines and piperidines). Such a large variety of psychoactive substances in Ecstasy tablets is associated with a high risk for users unaware of their composition.

Plant-Based Shape Memory Cryogel for Hemorrhage Control.

The escalating global demand for sustainable manufacturing, motivated by concerns over energy conservation and carbon footprints, encounters challenges due to insufficient renewable materials and arduous fabrication procedures to fulfill specific requirements in medical and healthcare systems. Here, biosafe pollen cryogel is engineered as effective hemostats without additional harmful crosslinkers to treat deep noncompressible wounds. A straightforward and low-energy approach is involved in forming stable macroporous cryogel, benefiting from the unique micro-hierarchical structures and chemical components of non-allergenic plant pollen. It is demonstrated that the pollen cryogel exhibits rapid water/blood-triggered shape-memory properties within 2 s. Owing to their inherent nano/micro hierarchical structure and abundant chemical functional groups on the pollen surface, the pollen cryogel shows effective hemostatic performance in a mouse liver penetration model, which is easily removed after usage. Overall, the self-crosslinking pollen cryogel in this work pioneers a framework of potential clinical applications for the first-hand treatment on deep noncompressible wounds.

Amino-modified nanoplastics at predicted environmental concentrations cause transgenerational toxicity through activating germline EGF signal in Caenorhabditis elegans

In the real environment, some chemical functional groups are unavoidably combined on the nanoplastic surface. Reportedly, amino-modified polystyrene nanoparticles (PS-A NPs) exposure in parents can induce severe transgenerational toxicity, but the underlying molecular mechanisms remain largely unclear. Using Caenorhabditis elegans as the animal model, this study was performed to investigate the role of germline epidermal growth factor (EGF) signal on modulating PS-A NPs' transgenerational toxicity. As a result, 1–10 μg/L PS-A NPs exposure transgenerationally enhanced germline EGF ligand/LIN-3 and NSH-1 levels. Germline RNAi of lin-3 and nsh-1 was resistant against PS-A NPs' transgenerational toxicity, implying the involvement of EGF ligand activation in inducing PS-A NPs' transgenerational toxicity. Furthermore, LIN-3 overexpression transgenerationally enhanced EGF receptor/LET-23 expression in the progeny, and let-23 RNAi in F1-generation notably suppressed PS-A NPs' transgenerational toxicity in the exposed worms overexpressing germline LIN-3 at P0 generation. Finally, LET-23 functioned in neurons and intestine for regulating PS-A NPs' transgenerational toxicity. LET-23 acted at the upstream DAF-16/FOXO within the intestine in response to PS-A NPs' transgenerational toxicity. In neurons, LET-23 functioned at the upstream of DAF-7/DBL-1, ligands of TGF-β signals, to mediate PS-A NPs' transgenerational toxicity. Briefly, this work revealed the exposure risk of PS-A NPs' transgenerational toxicity, which was regulated through activating germline EGF signal in organisms.

Obtention and Characterization of Microcrystalline Cellulose from Industrial Melon Residues Following a Biorefinery Approach

Residual melon by-products were explored for the first time as a bioresource of microcrystalline cellulose (MCC) obtention. Two alkaline extraction methods were employed, the traditional (4.5% NaOH, 2 h, 80 °C) and a thermo-alkaline in the autoclave (2% NaOH, 1 h, 100 °C), obtaining a yield of MCC ranging from 4.76 to 9.15% and 2.32 to 3.29%, respectively. The final MCCs were characterized for their chemical groups by Fourier-transform infrared spectroscopy (FTIR), crystallinity with X-ray diffraction, and morphology analyzed by scanning electron microscope (SEM). FTIR spectra showed that the traditional protocol allows for a more effective hemicellulose and lignin removal from the melon residues than the thermo-alkaline process. The degree of crystallinity of MCC ranged from 51.51 to 61.94% and 54.80 to 55.07% for the thermo-alkaline and traditional processes, respectively. The peaks detected in X-ray diffraction patterns indicated the presence of Type I cellulose. SEM analysis revealed microcrystals with rough surfaces and great porosity, which could remark their high-water absorption capacity and drug-carrier capacities. Thus, these findings could respond to the need to valorize industrial melon by-products as raw materials for MCC obtention with potential applications as biodegradable materials.

Carboxymethyl-Cellulose-Based Hydrogels Incorporated with Cellulose Nanocrystals Loaded with Vitamin D for Controlled Drug Delivery

Currently, the development of innovative materials for the treatment of various diseases is highly interesting and effective. Additionally, in recent years, environmental changes, including the search for a sustainable world, have become the main goal behind developing sustainable and suitable materials. In this context, this research produced innovative hydrogels that incorporate cellulose nanocrystals and nanofibres from underutilised fibres from a semiarid region of Brazil; the hydrogels were loaded with vitamin D to evaluate controlled drug release for the treatment of diverse diseases. Spectroscopic (FTIR, Raman, UV–VIS), X-ray diffraction, zeta potential and morphology (SEM, TEM) analyses were used to characterise these hydrogels. In addition, biocompatibility was assessed using a resazurin assay, and the in vitro kinetic accumulative release of vitamin D was measured. The results showed that nanocrystals and nanofibres changed the structure and crystallinity of the hydrogels. In addition, the chemical groups of the hydrogels were red- and blueshifted in the FTIR spectra when the nanocrystals, nanofibres and vitamin D were incorporated. Moreover, the nanocrystals and nanofibres were homogeneously spread into the hydrogel when vitamin D was loaded into the hydrogel matrix. Furthermore, the cytotoxicity was greater than 90%. Additionally, the in vitro accumulative kinetic data of vitamin D release were robust (close to 40 ng·mL−1), with equilibrium being reached in the first 30 min. These results confirm the potential of using these hydrogels as therapeutic biomaterials for diverse diseases and problems in humans, mainly in women, who are the most harmed by vitamin D deficiency.

DNA aptamer-functionalized PDA nanoparticles: from colloidal chemistry to biosensor applications

Polydopamine nanoparticles (PDA NPs) are widely utilized in the field of biomedical science for surface functionalization because of their unique characteristics, such as simple and low-cost preparation methods, good adhesive properties, and ability to incorporate amine and oxygen-rich chemical groups. However, challenges in the application of PDA NPs as surface coatings on electrode surfaces and in conjugation with biomolecules for electrochemical sensors still exist. In this work, we aimed to develop an electrochemical interface based on PDA NPs conjugated with a DNA aptamer for the detection of glycated albumin (GA) and to study DNA aptamers on the surfaces of PDA NPs to understand the aptamer-PDA surface interactions using molecular dynamics (MD) simulation. PDA NPs were synthesized by the oxidation of dopamine in Tris buffer at pH 10.5, conjugated with DNA aptamers specific to GA at different concentrations (0.05, 0.5, and 5 μM), and deposited on screen-printed carbon electrodes (SPCEs). The charge transfer resistance of the PDA NP-coated SPCEs decreased, indicating that the PDA NP composite is a conductive bioorganic material. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) confirmed that the PDA NPs were spherical, and dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy data indicated the successful conjugation of the aptamers on the PDA NPs. The as-prepared electrochemical interface was employed for the detection of GA. The detection limit was 0.17 μg/mL. For MD simulation, anti-GA aptamer through the 5′terminal end in a single-stranded DNA-aptamer structure and NH2 linker showed a stable structure with its axis perpendicular to the PDA surface. These findings provide insights into improved biosensor design and have demonstrated the potential for employing electrochemical PDA NP interfaces in point-of-care applications.

DNA aptamer-functionalized PDA nanoparticles: from colloidal chemistry to biosensor applications

Polydopamine nanoparticles (PDA NPs) are widely utilized in the field of biomedical science for surface functionalization because of their unique characteristics, such as simple and low-cost preparation methods, good adhesive properties, and ability to incorporate amine and oxygen-rich chemical groups. However, challenges in the application of PDA NPs as surface coatings on electrode surfaces and in conjugation with biomolecules for electrochemical sensors still exist. In this work, we aimed to develop an electrochemical interface based on PDA NPs conjugated with a DNA aptamer for the detection of glycated albumin (GA) and to study DNA aptamers on the surfaces of PDA NPs to understand the aptamer-PDA surface interactions using molecular dynamics (MD) simulation. PDA NPs were synthesized by the oxidation of dopamine in Tris buffer at pH 10.5, conjugated with DNA aptamers specific to GA at different concentrations (0.05, 0.5, and 5 μM), and deposited on screen-printed carbon electrodes (SPCEs). The charge transfer resistance of the PDA NP-coated SPCEs decreased, indicating that the PDA NP composite is a conductive bioorganic material. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) confirmed that the PDA NPs were spherical, and dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy data indicated the successful conjugation of the aptamers on the PDA NPs. The as-prepared electrochemical interface was employed for the detection of GA. The detection limit was 0.17 μg/mL. For MD simulation, anti-GA aptamer through the 5′terminal end in a single-stranded DNA-aptamer structure and NH2 linker showed a stable structure with its axis perpendicular to the PDA surface. These findings provide insights into improved biosensor design and have demonstrated the potential for employing electrochemical PDA NP interfaces in point-of-care applications.

Continuous flow mechanochemical synthesis of Zr-MOF as effective catalyst for 4-nitrophenol reduction

Nitroaromatic compounds (NACs) are a group of organic chemicals containing one or more nitro functional groups attached to an aromatic ring. These compounds are considered emerging pollutants (EPs) in wastewater due to their potential environmental and human health impacts. These NACs can enter wastewater through various sources, including the production and use of explosives, dyes, pesticides, or pharmaceuticals. 4-nitrophenol (4-NP) is considered a priority pollutant due to its toxicity and potential environmental and health hazards. Thus, its removal is crucial. For that purpose, a novel strategy to carry out Zr-MOFs syntheses has been developed employing I-CHEM technology (Impact Continuous flow Heated Mechanochemistry), an improved wet-milling process. The resulting materials have demonstrated efficacy as catalysts in the reduction of 4-NP towards 4-aminophenol (4-AP), a precursor to paracetamol.Notably, the most promising outcomes were achieved with Zr-MOF prepared through continuous flow mechanochemical processes utilizing Zr-methacrylate clusters as precursor (Zr-MOF/2@RL). 4-NP removal was successfully carried out at room temperature, with an outstanding optimal time of removal of 14 min, 30% faster than with synthesized by conventional methodologies. These findings underscore the innovation brought about by the I-CHEM synthetic approach, where more effective collisions are reached, as well as opening avenues for broader applications of MOFs. The wet-mechanochemical procedure not only demonstrates its novelty, but also presents the potential for scalability under continuous flow conditions, further enhancing the feasibility of large-scale production.

Study on chemical characterization and sleep-improvement function of Prunella vulgaris L. based on the functional components

Prunella vulgaris L. (P. vulgaris) has great application value and development prospects in improving sleep. In this study, we continued to evaluate the sleep-improvement function and mechanism of P. vulgaris from both chemical characterization and function based on sleep-improvement functional ingredients, rosmarinic acid and salviaflaside, screened out in the previous stage as the index components. The chemical constituents of P. vulgaris and its phenolic acid fraction were characterized by the UPLC-MSn technology. The quality of the sleep-improvement phenolic acid fraction of P. vulgaris was scientifically evaluated by fingerprints combined with quantitative analysis of rosmarinic acid and salviaflaside. The function of phenolic acid parts of P. vulgaris in improving sleep was verified by different insomnia models including the PCPA-induced insomnia model and surface platform sleep deprivation model. HE staining was used to observe the effect of P. vulgaris on the morphology of nerve cells in different brain regions. In vivo experiments and molecular docking explored the sedative-hypnotic effects of functional ingredients of P. vulgaris. All these results investigated the material basis and mechanism of P. vulgaris to improve sleep from multiple perspectives, which contribute to providing a basis for the development of functional food to improve sleep.

Investigation of optical, mechanical, thermal, wettability, and antibacterial activity of polyvinyl alcohol mixed with clay nanoparticles

In this research, polyvinyl alcohol (PVA) was mixed with clay nanoparticles with weight ratios of 1, 3, or 5 wt% to form PVA/clay composites using the solvent casting method for food packaging uses. Chemical bonds and function groups were identified using Fourier transform infrared spectroscopy, while mechanical parameters e.g. tensile strength (Tsr), elongation (Eb), and Young modulus (Ym) of the synthesized PVA/clay film were examined. Other characteristics were studied and discussed such as water uptake (swelling and porosity), contact angle, optical qualities (transmission, brightness), barrier properties i.e. water vapor transfer rate, and antimicrobial performance. The addition of clay nanoparticles raised Ym from 1.3 MPa to 2.9 MPa, while decreasing Tsr and Eb from 77 MPa and 3.8 % to 59 MPa and 3.6 %, respectively. Also, incorporating clay nanoparticles reduces water absorption, moisture level, transmission, and brightnesswhile improving the thermal conductivity and water vaportransport rates of PVA. Furthermore, the incorporation of clay nanoparticles improves thermal, mechanical, optical, and antibacterial performance, which could be beneficial for food packaging applications.

Phycobiliprotein from Arthrospira maxima: Conversion to nanoparticles by high-energy ball milling, structural characterization, and evaluation of their anti-inflammatory effect

Arthrospira maxima is a source of phycobiliproteins with different nutraceutical properties, e.g. antioxidant and anti-inflammatory activities. The current study was aimed at the elaboration, characterization, and evaluation of the anti-inflammatory effect of the phycobiliprotein nanoparticles extracted from Arthrospira maxima. Previously freeze-dried phycobiliproteins were milled by high-energy ball milling until reaching a nanometric size (optimal time: 4 h). Microscopy techniques were used for the characterization of the size and morphology of phycobiliproteins nanoparticles. Additionally, a spectroscopic study evidenced that nanosized reduction induced an increase in the chemical functional groups associated with its anti-inflammatory activity that was tested in a murine model, showing an immediate inflammatory effect. The novelty and importance of this contribution was to demonstrate that high energy ball milling is an emerging and green technology that can produce phycobiliprotein nanoparticles on a large-scale, without the use of organic solvents, to test their nutraceutical properties in a biological model by intragastric administration.

Searching for "Greener" Bioequivalents of CF3 to Lower its Environmental Impact.

Considering the broad use of the trifluoromethyl functional group (-CF3) in medicinal chemistry and taking into account the recent concerns on the negative environmental effects of CF3 containing compounds, we are searching for "greener" alternatives. Thus, different chemical groups (i.e. iodide, fluoride, cyclopropyl, isopropyl, cyclobutyl, 3-oxetyl, 2-oxetyl, methylsulfide, pentafluorosulfide, methylsulfonyl and sulfonamide) have been considered as potential bioequivalents of -CF3 aiming to use them in compounds with therapeutic interest instead of the polyfluoride functionality. Different structural (molecular surface and volume) and physicochemical (electronic and lipophilic) aspects of the bioequivalent functionalities proposed have been theoretically calculated and compared to those of -CF3. Additionally, the corresponding phenyl derivatives carrying these functionalities have been purchased or prepared and their experimental lipophilicity (i.e. LogP) measured using shake-flask experiments and UV-vis spectroscopy.

Expanding chemistry through in vitro and in vivo biocatalysis.

Living systems contain a vast network of metabolic reactions, providing a wealth of enzymes and cells as potential biocatalysts for chemical processes. The properties of protein and cell biocatalysts-high selectivity, the ability to control reaction sequence and operation in environmentally benign conditions-offer approaches to produce molecules at high efficiency while lowering the cost and environmental impact of industrial chemistry. Furthermore, biocatalysis offers the opportunity to generate chemical structures and functions that may be inaccessible to chemical synthesis. Here we consider developments in enzymes, biosynthetic pathways and cellular engineering that enable their use in catalysis for new chemistry and beyond.

Research on the Preparation and Performance of Biomimetic Warm-Mix Regeneration for Asphalt Mixtures

To determine the formula for biomimetic warm-mix regeneration and fulfill the requirements of a “high waste asphalt mixture content, high quality, and high level” for its usage in reclaimed asphalt pavement (RAP), this paper first determined the suitable preparation process and formula for biomimetic warm-mix regeneration based on orthogonal experiments and a gray correlation analysis. Then, the optimum dosage of the warm-mix regenerant was determined by a uniaxial penetration test, low-temperature splitting test, and freeze–thaw penetration test. The rutting test was conducted to characterize the high-temperature performance of the asphalt mixture. The Immersion Marshall Test and the freeze–thaw splitting test were used to characterize the water stability of the recycled asphalt mixture. The low-temperature small beam test was employed to study the low-temperature performance of the recycled asphalt mixture. The asphalt’s short-term and long-term aging processes were simulated using the rotary thin-film oven test (RTFOT) and the pressure aging test (PAV). The action mechanism of biomimetic warm-mix regeneration was revealed by Fourier-transform infrared spectroscopy (FTIR). Finally, a comprehensive thermal performance test was conducted on the aged asphalt after biomimetic warm-mix regeneration. The results showed that the self-made biomimetic warm-mix regeneration agent exhibited an excellent regenerative effect on RAP and significantly reduced the mixing temperature of the styrene–butadiene–styrene (SBS)-modified asphalt mixture. In addition, the self-made biomimetic warm-mix regeneration agent effectively improved the high- and low-temperature performance of the recycled asphalt mixture, but had no noticeable effect on the water stability. The suggested dosage of the biomimetic warm-mix regeneration agent was 6%, and the mixing temperature was 130 °C. The microscopic chemical analysis revealed that biomimetic warm-mix regeneration restored the performance of aged asphalt by supplementing the light component. The change rules of the chemical functional groups and the comprehensive thermal properties of the recycled mixture showed a good correlation with the change rules of its high- and low-temperature performance.

Preliminary Bioactivity Assessment of Myrothecium Species (Stachybotryaceae) Crude Extracts against Aedes aegypti (Diptera: Culicidae): A First Approach from This Phytopathogenic Fungi

Mosquitoes, as insect vectors, play a crucial role in transmitting viruses and parasites, leading to millions of human deaths in tropical and subtropical regions worldwide. This study aimed to evaluate the effects of ethanolic extracts of three species within the genus Myrothecium (M. roridum, M. dimerum, and M. nivale) on Aedes aegypti mosquito larvae to assess the inhibitory effect on growth and development, as well as to determine mortality. We quantify the average lethal concentrations and provide a qualitative characterization of the chemical groups responsible for their potential. Phytochemical screening revealed the presence of alkaloids, flavonoids, and terpenoids in the ethanolic extracts of the three fungal species. Tannins were found only in the extracts of M. dimerum and M. roridum. We observed a clear dependence of the effects of the crude extracts on mosquito larvae on the concentrations used and the duration of exposure. The toxic effect was observed after 48 h at a concentration of 800 ppm for both M. dimerum and M. nivale, while M. roridum showed effectiveness after 72 h. All three species within the genus Myrothecium exhibited 100% biological activity after 72 h of exposure at 600 ppm. At lower concentrations, there was moderate growth and development inhibitory activity in the insect life cycle. The study highlights the effectiveness of crude Myrothecium extracts in combating mosquito larvae, with effects becoming apparent between 48 and 72 h of exposure. This initial approach underscores the potential of the fungus’s secondary metabolites for further in-depth analysis of their individual effects or synergies between them.

Post-translational modifications in prion diseases.

More than 650 reversible and irreversible post-translational modifications (PTMs) of proteins have been listed so far. Canonical PTMs of proteins consist of the covalent addition of functional or chemical groups on target backbone amino-acids or the cleavage of the protein itself, giving rise to modified proteins with specific properties in terms of stability, solubility, cell distribution, activity, or interactions with other biomolecules. PTMs of protein contribute to cell homeostatic processes, enabling basal cell functions, allowing the cell to respond and adapt to variations of its environment, and globally maintaining the constancy of the milieu interieur (the body's inner environment) to sustain human health. Abnormal protein PTMs are, however, associated with several disease states, such as cancers, metabolic disorders, or neurodegenerative diseases. Abnormal PTMs alter the functional properties of the protein or even cause a loss of protein function. One example of dramatic PTMs concerns the cellular prion protein (PrPC), a GPI-anchored signaling molecule at the plasma membrane, whose irreversible post-translational conformational conversion (PTCC) into pathogenic prions (PrPSc) provokes neurodegeneration. PrPC PTCC into PrPSc is an additional type of PTM that affects the tridimensional structure and physiological function of PrPC and generates a protein conformer with neurotoxic properties. PrPC PTCC into PrPSc in neurons is the first step of a deleterious sequence of events at the root of a group of neurodegenerative disorders affecting both humans (Creutzfeldt-Jakob diseases for the most representative diseases) and animals (scrapie in sheep, bovine spongiform encephalopathy in cow, and chronic wasting disease in elk and deer). There are currently no therapies to block PrPC PTCC into PrPSc and stop neurodegeneration in prion diseases. Here, we review known PrPC PTMs that influence PrPC conversion into PrPSc. We summarized how PrPC PTCC into PrPSc impacts the PrPC interactome at the plasma membrane and the downstream intracellular controlled protein effectors, whose abnormal activation or trafficking caused by altered PTMs promotes neurodegeneration. We discussed these effectors as candidate drug targets for prion diseases and possibly other neurodegenerative diseases.

Towards chemical source tracking and characterization using physics-informed neural networks

This paper presents a new algorithm using physics-informed neural networks (PINNs) to track and characterize spatio-temporally varying chemical sources based on time-resolved measurements of chemical concentration, fluid velocity, and pressure. Chemical source emission functions, chemical concentration, fluid velocity and fluid pressure fields are modeled as multi-layer percepterons (MLPs). During the training process, sensors readings of chemical concentratio, fluid velocity, and fluid pressure are matched to the output of the respective MLPs at the given spatio-temporal locations. Simultaneously, the physics of fluid flow and chemical dispersion at an arbitrary number of spatio-temporal locations in the domain of interest are enforced through regularization. Once trained, the constituent MLPs can be evaluated to generate the time resolved maps of source emissions, chemical concentration, fluid velocity and pressure. Extensive numerical simulation validate the method, including scenarios with both static and dynamic sources in complex flow fields. This innovative approach marks a significant advancement in environmental monitoring technologies.

Investigation of optical, mechanical, thermal, wettability, and antibacterial activity of polyvinyl alcohol mixed with clay nanoparticles

In this research, polyvinyl alcohol (PVA) was mixed with clay nanoparticles with weight ratios of 1, 3, or 5 wt% to form PVA/clay composites using the solvent casting method for food packaging uses. Chemical bonds and function groups were identified using Fourier transform infrared spectroscopy, while mechanical parameters e.g. tensile strength (Tsr), elongation (Eb), and Young modulus (Ym) of the synthesized PVA/clay film were examined. Other characteristics were studied and discussed such as water uptake (swelling and porosity), contact angle, optical qualities (transmission, brightness), barrier properties i.e. water vapor transfer rate, and antimicrobial performance. The addition of clay nanoparticles raised Ym from 1.3 MPa to 2.9 MPa, while decreasing Tsr and Eb from 77 MPa and 3.8 % to 59 MPa and 3.6 %, respectively. Also, incorporating clay nanoparticles reduces water absorption, moisture level, transmission, and brightnesswhile improving the thermal conductivity and water vaportransport rates of PVA. Furthermore, the incorporation of clay nanoparticles improves thermal, mechanical, optical, and antibacterial performance, which could be beneficial for food packaging applications.

Influence of chemical structures on reduction rates and defluorination of fluoroarenes during catalytic reduction using a rhodium-based catalyst

Continuous growth in fluoroarene production has led to environmental pollution and health concerns owing to their persistence, which is attributed to the stable C–F bond in their structures. Herein, we investigated fluoroarene decomposition via hydrodefluorination using a rhodium-based catalyst, focusing on the effects of the chemical structure and functional group on the defluorination yield. Most compounds, except (pentafluoroethyl)benzene, exhibited full or partial reduction with pseudo-first-order rate constants in the range of 0.002–0.396 min−1 and defluorination yields of 0%–100%. Fluoroarenes with hydroxyl, methyl, and carboxylate groups were selected to elucidate how hydrocarbon and oxygen-containing functional groups influence the reaction rate and defluorination. Inhibition of the reaction rate and defluorination yield based on functional groups increased in the order of hydroxyl < methyl < carboxylate, which was identical to the order of the electron-withdrawing effect. Fluoroarenes with polyfluoro groups were also assessed; polyfluoro groups demonstrated a different influence on catalyst activity than non-fluorine functional groups because of fluorine atoms in the substituents undergoing defluorination. The reaction kinetics of (difluoromethyl)fluorobenzenes and their intermediates suggested that hydrogenation and defluorination occurred during degradation. Finally, the effects of the type and position of functional groups on the reaction rate and defluorination yield were investigated via multivariable linear regression analysis. Notably, the electron-withdrawing nature of functional groups appeared to have a greater impact on the defluorination yield of fluoroarenes than the calculated C–F bond dissociation energy.

Exploring the Impact of Bio-Based Plasticizers on the Curing Behavior and Material Properties of a Simplified Tire-Tread Compound.

The tire industry needs to become more sustainable to reduce pollution and fight climate change. Replacing fossil ingredients in a tire-tread compound with bio-based alternatives is an approach to create a more sustainable product. For instance, the plasticizer can be replaced, which is a petroleum-based ingredient used in relatively high amounts in the rubber. This approach was followed in the current study. Three plant-based plasticizers were selected as potential substitutes for treated distillate aromatic extract (TDAE) in a simplified tire-tread compound formulation, namely, sunflower oil, coconut oil, and cardanol. Additionally, squalane was used as a TDAE replacement to further investigate the possible interactions between plasticizers and other compound ingredients. Squalane (C30H62) is a fully saturated substance, containing six methyl groups but no additional chemical functional groups. Therefore, it was expected that squalane would result in limited interactions within the studied system. All alternatives to TDAE showed an increased cure rate and decreased scorch time, except squalane. This indicates that the three bio-based plasticizers might interact with the vulcanization system. For example, they could function as an additional coactivator of the curing system and/or shield the silica surface. A severe decrease in maximum torque and an increase in elongation at break were obtained for cardanol and sunflower oil. Both plasticizers also resulted in lower crosslink densities compared to the other compounds. A model study with the bio-plasticizers and sulfur verified that the unsaturation in the cardanol and sunflower oil reacted with the crosslinking agent. This leads to less sulfur available for the curing reaction, explaining the low maximum torque. The tan δ curves showed that all replacements resulted in a decrease in the glass transition temperature of the compound. Although all oil alternatives displayed promising results, none of them are suitable as a direct substitute for TDAE in a tire-tread compound due to its ability to interact additionally with other rubber ingredients and contribute in this form to the reinforcement of the compound.