Chemical Groups Research Articles

Searching for "Greener" Bioequivalents of CF3 to Lower its Environmental Impact.

Considering the broad use of the trifluoromethyl functional group (-CF3) in medicinal chemistry and taking into account the recent concerns on the negative environmental effects of CF3 containing compounds, we are searching for "greener" alternatives. Thus, different chemical groups (i. e. iodide, fluoride, cyclopropyl, isopropyl, cyclobutyl, 3-oxetyl, 2-oxetyl, methylsulfide, pentafluorosulfide, methylsulfonyl and sulfonamide) have been considered as potential bioequivalents of -CF3 aiming to use them in compounds with therapeutic interest instead of the polyfluoride functionality. Different structural (molecular surface and volume) and physicochemical (electronic and lipophilic) aspects of the bioequivalent functionalities proposed have been theoretically calculated and compared to those of -CF3. Additionally, the corresponding phenyl derivatives carrying these functionalities have been purchased or prepared and their experimental lipophilicity (i. e. LogP) measured using shake-flask experiments and UV-vis spectroscopy.

Expanding chemistry through in vitro and in vivo biocatalysis.

Living systems contain a vast network of metabolic reactions, providing a wealth of enzymes and cells as potential biocatalysts for chemical processes. The properties of protein and cell biocatalysts-high selectivity, the ability to control reaction sequence and operation in environmentally benign conditions-offer approaches to produce molecules at high efficiency while lowering the cost and environmental impact of industrial chemistry. Furthermore, biocatalysis offers the opportunity to generate chemical structures and functions that may be inaccessible to chemical synthesis. Here we consider developments in enzymes, biosynthetic pathways and cellular engineering that enable their use in catalysis for new chemistry and beyond.

Influence of chemical structures on reduction rates and defluorination of fluoroarenes during catalytic reduction using a rhodium-based catalyst

Continuous growth in fluoroarene production has led to environmental pollution and health concerns owing to their persistence, which is attributed to the stable C–F bond in their structures. Herein, we investigated fluoroarene decomposition via hydrodefluorination using a rhodium-based catalyst, focusing on the effects of the chemical structure and functional group on the defluorination yield. Most compounds, except (pentafluoroethyl)benzene, exhibited full or partial reduction with pseudo-first-order rate constants in the range of 0.002–0.396 min−1 and defluorination yields of 0%–100%. Fluoroarenes with hydroxyl, methyl, and carboxylate groups were selected to elucidate how hydrocarbon and oxygen-containing functional groups influence the reaction rate and defluorination. Inhibition of the reaction rate and defluorination yield based on functional groups increased in the order of hydroxyl < methyl < carboxylate, which was identical to the order of the electron-withdrawing effect. Fluoroarenes with polyfluoro groups were also assessed; polyfluoro groups demonstrated a different influence on catalyst activity than non-fluorine functional groups because of fluorine atoms in the substituents undergoing defluorination. The reaction kinetics of (difluoromethyl)fluorobenzenes and their intermediates suggested that hydrogenation and defluorination occurred during degradation. Finally, the effects of the type and position of functional groups on the reaction rate and defluorination yield were investigated via multivariable linear regression analysis. Notably, the electron-withdrawing nature of functional groups appeared to have a greater impact on the defluorination yield of fluoroarenes than the calculated C–F bond dissociation energy.

Research on the Preparation and Performance of Biomimetic Warm-Mix Regeneration for Asphalt Mixtures

To determine the formula for biomimetic warm-mix regeneration and fulfill the requirements of a “high waste asphalt mixture content, high quality, and high level” for its usage in reclaimed asphalt pavement (RAP), this paper first determined the suitable preparation process and formula for biomimetic warm-mix regeneration based on orthogonal experiments and a gray correlation analysis. Then, the optimum dosage of the warm-mix regenerant was determined by a uniaxial penetration test, low-temperature splitting test, and freeze–thaw penetration test. The rutting test was conducted to characterize the high-temperature performance of the asphalt mixture. The Immersion Marshall Test and the freeze–thaw splitting test were used to characterize the water stability of the recycled asphalt mixture. The low-temperature small beam test was employed to study the low-temperature performance of the recycled asphalt mixture. The asphalt’s short-term and long-term aging processes were simulated using the rotary thin-film oven test (RTFOT) and the pressure aging test (PAV). The action mechanism of biomimetic warm-mix regeneration was revealed by Fourier-transform infrared spectroscopy (FTIR). Finally, a comprehensive thermal performance test was conducted on the aged asphalt after biomimetic warm-mix regeneration. The results showed that the self-made biomimetic warm-mix regeneration agent exhibited an excellent regenerative effect on RAP and significantly reduced the mixing temperature of the styrene–butadiene–styrene (SBS)-modified asphalt mixture. In addition, the self-made biomimetic warm-mix regeneration agent effectively improved the high- and low-temperature performance of the recycled asphalt mixture, but had no noticeable effect on the water stability. The suggested dosage of the biomimetic warm-mix regeneration agent was 6%, and the mixing temperature was 130 °C. The microscopic chemical analysis revealed that biomimetic warm-mix regeneration restored the performance of aged asphalt by supplementing the light component. The change rules of the chemical functional groups and the comprehensive thermal properties of the recycled mixture showed a good correlation with the change rules of its high- and low-temperature performance.

Preliminary Bioactivity Assessment of Myrothecium Species (Stachybotryaceae) Crude Extracts against Aedes aegypti (Diptera: Culicidae): A First Approach from This Phytopathogenic Fungi.

Mosquitoes, as insect vectors, play a crucial role in transmitting viruses and parasites, leading to millions of human deaths in tropical and subtropical regions worldwide. This study aimed to evaluate the effects of ethanolic extracts of three species within the genus Myrothecium (M. roridum, M. dimerum, and M. nivale) on Aedes aegypti mosquito larvae to assess the inhibitory effect on growth and development, as well as to determine mortality. We quantify the average lethal concentrations and provide a qualitative characterization of the chemical groups responsible for their potential. Phytochemical screening revealed the presence of alkaloids, flavonoids, and terpenoids in the ethanolic extracts of the three fungal species. Tannins were found only in the extracts of M. dimerum and M. roridum. We observed a clear dependence of the effects of the crude extracts on mosquito larvae on the concentrations used and the duration of exposure. The toxic effect was observed after 48 h at a concentration of 800 ppm for both M. dimerum and M. nivale, while M. roridum showed effectiveness after 72 h. All three species within the genus Myrothecium exhibited 100% biological activity after 72 h of exposure at 600 ppm. At lower concentrations, there was moderate growth and development inhibitory activity in the insect life cycle. The study highlights the effectiveness of crude Myrothecium extracts in combating mosquito larvae, with effects becoming apparent between 48 and 72 h of exposure. This initial approach underscores the potential of the fungus's secondary metabolites for further in-depth analysis of their individual effects or synergies between them.

Oxidation and mineralization rates of harmful organic chemicals in hydroxyl radical induced reactions

In most of advanced oxidation processes (AOPs) used to destroy harmful organic chemicals in water/wastewater hydroxyl radical (•OH) reactions oxidize (increasing the oxygen/carbon ratio in the molecules) and mineralize (transforming them to inorganic molecules, H2O, CO2, etc.) these contaminants. In this paper, we used the radiolysis of water to produce •OH and characterised the rate of oxidation and mineralization by the dose dependences of the Chemical Oxygen Demand (COD) and Total Organic Carbon (TOC) content values. Analysis of the dose dependences for 34 harmful organic compounds showed large differences in the oxidation and mineralization rates and these parameters are characteristic to the given group of chemicals. E.g., the rate of oxidation is relatively low for fluoroquinolone antibiotics; it is high for β-blocker medicines. Mineralization rates are low for both fluoroquinolones and β-blockers. The one-electron-oxidant •OH in most cases induces two − four-electron-oxidations. Most of the degradation takes place gradually, through several stable molecule intermediates. However, based on the results it is likely, that some part of the oxidation and mineralization takes place parallel. The organic radicals formed in •OH reactions react with several O2 molecules and release several inorganic fragments during the radical life cycle.

Post-translational modifications in prion diseases.

More than 650 reversible and irreversible post-translational modifications (PTMs) of proteins have been listed so far. Canonical PTMs of proteins consist of the covalent addition of functional or chemical groups on target backbone amino-acids or the cleavage of the protein itself, giving rise to modified proteins with specific properties in terms of stability, solubility, cell distribution, activity, or interactions with other biomolecules. PTMs of protein contribute to cell homeostatic processes, enabling basal cell functions, allowing the cell to respond and adapt to variations of its environment, and globally maintaining the constancy of the milieu interieur (the body's inner environment) to sustain human health. Abnormal protein PTMs are, however, associated with several disease states, such as cancers, metabolic disorders, or neurodegenerative diseases. Abnormal PTMs alter the functional properties of the protein or even cause a loss of protein function. One example of dramatic PTMs concerns the cellular prion protein (PrPC), a GPI-anchored signaling molecule at the plasma membrane, whose irreversible post-translational conformational conversion (PTCC) into pathogenic prions (PrPSc) provokes neurodegeneration. PrPC PTCC into PrPSc is an additional type of PTM that affects the tridimensional structure and physiological function of PrPC and generates a protein conformer with neurotoxic properties. PrPC PTCC into PrPSc in neurons is the first step of a deleterious sequence of events at the root of a group of neurodegenerative disorders affecting both humans (Creutzfeldt-Jakob diseases for the most representative diseases) and animals (scrapie in sheep, bovine spongiform encephalopathy in cow, and chronic wasting disease in elk and deer). There are currently no therapies to block PrPC PTCC into PrPSc and stop neurodegeneration in prion diseases. Here, we review known PrPC PTMs that influence PrPC conversion into PrPSc. We summarized how PrPC PTCC into PrPSc impacts the PrPC interactome at the plasma membrane and the downstream intracellular controlled protein effectors, whose abnormal activation or trafficking caused by altered PTMs promotes neurodegeneration. We discussed these effectors as candidate drug targets for prion diseases and possibly other neurodegenerative diseases.

Exploring the Impact of Bio-Based Plasticizers on the Curing Behavior and Material Properties of a Simplified Tire-Tread Compound.

The tire industry needs to become more sustainable to reduce pollution and fight climate change. Replacing fossil ingredients in a tire-tread compound with bio-based alternatives is an approach to create a more sustainable product. For instance, the plasticizer can be replaced, which is a petroleum-based ingredient used in relatively high amounts in the rubber. This approach was followed in the current study. Three plant-based plasticizers were selected as potential substitutes for treated distillate aromatic extract (TDAE) in a simplified tire-tread compound formulation, namely, sunflower oil, coconut oil, and cardanol. Additionally, squalane was used as a TDAE replacement to further investigate the possible interactions between plasticizers and other compound ingredients. Squalane (C30H62) is a fully saturated substance, containing six methyl groups but no additional chemical functional groups. Therefore, it was expected that squalane would result in limited interactions within the studied system. All alternatives to TDAE showed an increased cure rate and decreased scorch time, except squalane. This indicates that the three bio-based plasticizers might interact with the vulcanization system. For example, they could function as an additional coactivator of the curing system and/or shield the silica surface. A severe decrease in maximum torque and an increase in elongation at break were obtained for cardanol and sunflower oil. Both plasticizers also resulted in lower crosslink densities compared to the other compounds. A model study with the bio-plasticizers and sulfur verified that the unsaturation in the cardanol and sunflower oil reacted with the crosslinking agent. This leads to less sulfur available for the curing reaction, explaining the low maximum torque. The tan δ curves showed that all replacements resulted in a decrease in the glass transition temperature of the compound. Although all oil alternatives displayed promising results, none of them are suitable as a direct substitute for TDAE in a tire-tread compound due to its ability to interact additionally with other rubber ingredients and contribute in this form to the reinforcement of the compound.

Photophysical properties of porphyrins and their applications to polariton chemistry (a review)

Porphyrins are a fundamental class of molecules involved in a multitude of biological and chemical functions ranging from photosynthesis in plants to biomarkers in medicine to optoelectronic devises. Despite the porphyrin molecule being such an important class of molecules known for centuries, its photophysics are surprisingly complex and models describing the spectroscopic behavior of porphyrins did not emerge until the 1950s. This review aims to distil the basics of porphyrin photophysics, describing how the Soret band and the Q band of the molecule are formed. In particular, a discussion of the four orbital theory and Hertzberg-Teller coupling will be conducted, both of which are necessary to understand the spectral properties of the porphyrin molecule. The review further aims to complement previous work discussing the chemical applications of hybrid light-matter states by discussing how the spectroscopic behavior of porphyrins is particularly useful in polariton chemistry.

Creation, Control, and Modeling of NV Centers in Nanodiamonds

AbstractSensing based on Nitrogen‐Vacancy (NV) centers in nanodiamonds (NDs) represents a potentially groundbreaking technology with broad applications. Nevertheless, the optimization of their quantum‐optical properties is still a challenging issue. The present work aims at enhancing and controlling NV centers optical properties in NDs by combining their surface chemistry tuning and proton beam irradiation. Systematic thermal oxidations are carried out to study the evolution of surface chemical groups (IR spectroscopy), as well as their influence on optical properties (photoluminescence spectroscopy, PL decay measurements). Proton irradiation is performed by exploring a wide range of fluences (1014 – 1017 cm−2) in order to precisely control the amount of NV centers, thus defining the conditions that maximize their creation and emission intensity. In addition, NV centers charge state control is achieved by assessing NV−/NV0 ratio upon different surface termination tuning and NV centers amount. Finally, a novel predictive mathematical model is developed, allowing for the evaluation of the efficiencies of the formation of both NV− and NV0. Although the model is tested in the specific case study with proton irradiated NDs, it offers a broad applicability, thus representing a key landmark in the prediction of the outcome of ion‐beam‐based color centers generation in diamond.

Albumin Nanoparticle-Based Drug Delivery Systems.

Nanoparticle-based systems are extensively investigated for drug delivery. Among others, with superior biocompatibility and enhanced targeting capacity, albumin appears to be a promising carrier for drug delivery. Albumin nanoparticles are highly favored in many disease therapies, as they have the proper chemical groups for modification, cell-binding sites for cell adhesion, and affinity to protein drugs for nanocomplex generation. Herein, this review summarizes the recent fabrication techniques, modification strategies, and application of albumin nanoparticles. We first discuss various albumin nanoparticle fabrication methods, from both pros and cons. Then, we provide a comprehensive introduction to the modification section, including organic albumin nanoparticles, metal albumin nanoparticles, inorganic albumin nanoparticles, and albumin nanoparticle-based hybrids. We finally bring further perspectives on albumin nanoparticles used for various critical diseases.

Superhydrophobic ceramic membrane coupled with a biphasic solvent for efficient CO2 capture

An innovative strategy was proposed by integration of membrane contactor (MC) with biphasic solvent for efficient CO2 capture from flue gas. The accessible fly ash-based ceramic membrane (CM) underwent hydrophobic modification through silane grafting, followed by fluoroalkylsilane decoration, to prepare the superhydrophobic membrane (CSCM). The CSCM significantly improved resistance to wetting by the biphasic solvent, consisting of amine (DETA) and sulfolane (TMS). Morphological characterizations and chemical analysis revealed the notable enhancements in pore structure and hydrophobic chemical groups for the modified membrane. Predictions of wetting/bubbling behavior based on static wetting theory referred the liquid entry pressure (LEP) of CSCM increased by 20 kPa compared to pristine CM. Compared with traditional amine solvents, the biphasic solvent presented the expected phase separation. Performance experiments demonstrated that the CO2 capture efficiency of the biphasic solvent increased by 7%, and the electrical energy required for desorption decreased by 32%. The 60-h continuous testing and supplemental characterization of used membrane confirmed the excellent adaptability and durability of the CSCMs. This study provides a potential approach for accessing hydrophobic ceramic membranes and biphasic solvents for industrial CO2 capture.

Ketoprofen-Tromethamine: Binary Phase Diagram of Multicomponent Crystal, Dissolution Rate, and Analgesic Activity Evaluation

Ketoprofen is a non-steroidal anti-inflammatory drug (NSAID) whose formulation options are limited due to its low dissolution rate in aqueous media. This research aimed to enhance the solubility of ketoprofen in distilled water and to compare the anti-inflammatory and analgesic effects of its resulting multicomponent crystal with tromethamine. The binary phase diagram of ketoprofen-tromethamine was created across molar ratios ranging from 1:9 to 9:1. The multicomponent crystal comprising ketoprofen and tromethamine in the selected ratio was synthesized using a solvent drop grinding method and subjected to further characterization for thermal properties, crystallinity, chemical groups, and morphology. The dissolution rate assessments were evaluated in CO2-free distilled water. Pharmacological analyses examined the anti-inflammatory and analgesic effects of the multicomponent crystal. The binary phase analysis identified the 5:5 (1:1) molar ratio as optimal in forming a multicomponent crystal. Thermograms and diffractograms revealed crystalline alterations attributed to a new crystalline phase. The new multicomponent crystal exhibited approximately 2.7 times higher dissolution rate after 30 minutes, outperforming pure ketoprofen. Pharmacological assessments demonstrated superior analgesic effects of the multicomponent crystal. In summary, the ketoprofen-tromethamine cocrystal in 1:1 molar ratio offers enhanced dissolution rate and provides better analgesic activity than ketoprofen alone.

Neonicotinoid insecticides in a large-scale agricultural basin system-Use, emission, transportation, and their contributions to the ecological risks in the Pearl River Basin, China

Neonicotinoid pollution has increased rapidly and globally in recent years, posing significant risks to agricultural areas. Quantifying use and emission, transport and fate of these contaminants, and risks is critical for proper management of neonicotinoids in river basin. This study elucidates use and emissions of neonicotinoid pesticides in a typical large-scale agriculture basin of China, the Pearl River Basin, as well as the resulting agricultural non-point source pollution and related ecological risks using market surveys, data analysis, and the Soil and Water Assessment Tool. Neonicotinoid use in the basin was estimated at 1361 t in 2019, of which 83.1 % was used in agriculture. After application, approximately 99.1 t neonicotinoids were transported to the Pearl River, accounting for 7.2 % of the total applied. Estimated aquatic concentrations of neonicotinoids showed three seasonal peaks. Several distinct groups of neonicotinoid chemicals can be observed in the Pearl River, as estimated by the model. An estimated 3.9 % of the neonicotinoids used were transported to the South China Sea. Based on the present risk assessment result, several neonicotinoids posed risks to aquatic organism. Therefore, the use of alternative products and/or reduced use is deemed necessary. This study provides novel insights into the fate and ecological risks of neonicotinoid insecticides in large-scale watersheds, and underscores the need for greater efficiency of use and extensive environmental monitoring.

Effect of Gamma Irradiation (Cesium-137) on the Properties of Chemical Functional Groups from Collagen Extraction of Snakehead Fish Scales (Channa striata)

This study aims to determine the absorption spectrum of the functional groups of snakehead fish scale collagen before irradiation and the effect of the dose of Cesium-137 irradiation on the functional groups in snakehead fish scale collagen. The extraction method used is acid extraction. Measurement of the absorption spectrum of collagen samples from snakehead fish scales using an FTIR spectrophotometer. Samples were irradiated using doses of 10 mGy, 30 mGy and 50 mGy. The results of the functional group values before irradiation produce amide A, amide I, amide II and amide III which fill the absorption area of the functional group. The results of the functional group values produced after irradiation for a dose of 10 mGy produced amide I, amide II and amide III which filled the absorption area. Amide A and amide B do not fill the absorption region at a dose of 10 mGy. Doses of 30 mGy and 50 mGy produced amide A, amide I, amide II and amide III which filled the absorption area. Amide B did not fill the absorption area at doses of 30 mGy and 50 mGy. Amide groups that are not detected or do not meet standard collagen functional group standards can be caused by the chemical composition of the fish scale extraction process.

On the Use of Nanoparticles in Dental Implants.

Results obtained in physics, chemistry and materials science on nanoparticles have drawn significant interest in the use of nanostructures on dental implants. The main focus concerns nanoscale surface modifications of titanium-based dental implants in order to increase the surface roughness and provide a better bone-implant interfacial area. Surface coatings via the sol-gel process ensure the deposition of a homogeneous layer of nanoparticles or mixtures of nanoparticles on the titanium substrate. Nanotubular structures created on the titanium surface by anodic oxidation yield an interesting nanotopography for drug release. Carbon-based nanomaterials hold great promise in the field of dentistry on account of their outstanding mechanical properties and their structural characteristics. Carbon nanomaterials that include carbon nanotubes, graphene and its derivatives (graphene oxide and graphene quantum dots) can be used as coatings of the implant surface. Their antibacterial properties as well as their ability to be functionalized with adequate chemical groups make them particularly useful for improving biocompatibility and promoting osseointegration. Nevertheless, an evaluation of their possible toxicity is required before being exploited in clinical trials.

Broadening access to small-molecule parameterization with the force field toolkit.

Access to accurate force-field parameters for small molecules is crucial for computational studies of their interactions with proteins. Although a number of general force fields for small molecules exist, e.g., CGenFF, GAFF, and OPLS, they do not cover all common chemical groups and their combinations. The Force Field Toolkit (ffTK) provides a comprehensive graphical interface that streamlines the development of classical parameters for small molecules directly from quantum mechanical (QM) calculations, allowing for force-field generation for almost any chemical group and validation of the fit relative to the target data. ffTK relies on supported external software for the QM calculations, but it can generate the necessary QM input files and parse and analyze the QM output. In previous ffTK versions, support for Gaussian and ORCA QM packages was implemented. Here, we add support for Psi4, an open-source QM package free for all users, thereby broadening user access to ffTK. We also compare the parameter sets obtained with the new ffTK version using Gaussian, ORCA, and Psi4 for three molecules: pyrrolidine, n-propylammonium cation, and chlorobenzene. Despite minor differences between the resulting parameter sets for each compound, most prominently in the dihedral and improper terms, we show that conformational distributions sampled in molecular dynamics simulations using these parameter sets are quite comparable.

An in silico insight on inhibitory potential of short-chain PFHxA and PFHxS against endogenous antioxidant enzymes

Per- and polyfluoroalkyl substances (PFAS) are a large group of synthetic chemicals that are globally used in various commercial products like cloths, carpets, cookware, firefighting foams, cosmetics, electronic products, etc. Inappropriate disposal of these consumer products could lead to environmental contamination with PFAS. Nowadays short-chain PFAS are substituting the long chain PFAS due to their short half-life. However, multiple studies have suggested that short-chain PFAS such as Perfluorohexanoic acid (PFHxA) and Perfluorohexanesulfonic acid (PFHxS) modulate antioxidant enzyme activities, induce Reactive Oxygen Species production, and contribute to oxidative stress in organisms. Notably, experimental set-ups aiming to investigate the mode of action of these compounds on antioxidants are entirely lacking. Hence in the present study, a ligand-docking approach was adopted to investigate the potential intermolecular interactions between short-chain PFAS and major antioxidants such as Glutathione peroxidase-4, Glutathione reductase, Glutathione S-Transferase, Catalase, and Superoxide dismutase-1. Three-dimensional structures of proteins were processed and docked individually with PFHxA and PFHxS using the AutoDock vina.. Results indicated significant binding affinities between various antioxidant proteins and PFAS. Interestingly, non-covalent interactions such as H-bonds, van der Waals, CH bonds, halogen bonds, and alkyl/pi-alkyl were apparent at protein-ligand interface. Hence, these results suggest that both PFHxA and PFHxS may potentially interact with the endogenous antioxidants and this outcome can be detrimental to the redox homeostasis of living organisms.

Bletilla striata Polysaccharide-Containing Carboxymethyl Cellulose Bilayer Structure Membrane for Prevention of Postoperative Adhesion and Achilles Tendon Repair.

Postoperative tissue adhesion and poor tendon healing are major clinical problems associated with tendon surgery. To avoid postoperative adhesion and promote tendon healing, we developed and synthesized a membrane to wrap the surgical site after tendon suturing. The bilayer-structured porous membrane comprised an outer layer [1,4-butanediol diglycidyl ether cross-linked with carboxymethyl cellulose (CX)] and an inner layer [1,4-butanediol diglycidyl ether cross-linked with Bletilla striata polysaccharides and carboxymethyl cellulose (CXB)]. The morphology, chemical functional groups, and membrane structure were determined. In vitro experiments revealed that the CX/CXB membrane demonstrated good biosafety and biodegradability, promoted tenocyte proliferation and migration, and exhibited low cell attachment and anti-inflammatory effects. Furthermore, in in vivo animal study, the CX/CXB membrane effectively reduced postoperative tendon-peripheral tissue adhesion and improved tendon repair, downregulating inflammatory cytokines in the tendon tissue at the surgical site, which ultimately increased tendon strength by 54% after 4 weeks.

The Effects of Frass and Vermicompost Fertilization on the Biometrical Parameters of Plant and Soil Quality, and the Rhizobiome, in Red Beet (Beta vulgaris L.) Cultivation

Insect frass and vermicompost hold potential applications as fertilizers, with their abilities to improve plant resilience against unfavorable environmental conditions and increase their resistance to pests and diseases. In this study, we explored the effects of vermicompost fertilization, mealworm frass, and superworm frass as potential plant fertilizers for red beet cultivation. We analyzed the connections among chemical parameters, rhizobiome structure and function, and the biometrics of fertilizer-treated plants. In general, soils enriched with vermicompost and superworm frass exhibited the highest macroelement contents. Dry superworm frass fertilization was characterized by the increased availabilities of total nitrogen, NH4-N, and NO3-N. The use of vermicompost and mealworm frass resulted in significantly higher red beet biomass values. The presence of the highest N-fixation potential and key hormonal substances involved in plant development, such as auxins and gibberellins, was demonstrated using wet superworm frass. The results indicated that wet superworm frass, similar to vermicompost and dry superworm frass, exhibits high chemoheterotrophic potential. This suggests an r-type strategy and high adaptive flexibility of rhizobial bacteria. As a consequence, both life in the root zone and the microbiome itself may be better adapted to sudden, unfavorable environmental changes or attacks by plant pathogens.