Reaction Characteristics Research Articles

Characteristics of Drug Hypersensitivity Reactions in Children: A Retrospective Analysis in an Allergy Outpatient Clinic

Objective: Confirmation of drug hypersensitivity reactions (DHRs) is crucial—as various nonallergic reactions, such as viral infections, in children can mimic such reactions. This study aimed to evaluate the characteristics of children with suspected DHRs applying to an allergy outpatient clinic. Material and Methods: This study involved children who visited our hospital’s pediatric allergy outpatient clinic between April 1 and December 31, 2023, with suspected DHRs . The data of patients analyzed retrospectively. Patient demographics, reaction characteristics, culprit drugs, diagnostic procedures (including skin and/or provocation tests), and final diagnoses were recorded. Results: The study included 163 reactions of 140 patients with 176 suspected drugs. The median age was 7.7 years (interquartile range [IQR]; 5.1–12 years), with an equal gender distribution. Notably, 27.1% of the patients presented with concurrent atopic diseases. The median age at the onset of reaction was 72 months (IQR; 34.5–108 months), with 16% of reactions occurring within hospital settings and the remainder at home. Oral administration accounted for 84.7% of the reactions, with antibiotics being the most common culprit drug group (75.5%). Immediate reactions constituted 41.1% (n = 67) of reactions, while delayed reactions accounted for 58.9% (n = 96). Skin symptoms were predominant (97.5%). DHRs were excluded in 75.5% (n = 123) of reactions but confirmed by diagnostic drug allergy tests in 4.9% (n = 8). Conclusion: A through evaluation of suspected DHRs in children is essential. Despite high suspicion rates, confirmation via diagnostic tests was low, emphasizing the need for referral to specialized clinics and appropriate diagnostics for accurate management.

Электромагнитные поля сотовой связи как факторы риска негативного воздействия на центральную нервную систему детей и подростков (обзор). Часть 1. Моделирование. параметры электроэнцефалографии и сенсомоторных реакций

It is quite relevant to investigate possible outcomes of exposure to radio frequency electromagnetic fields (RF EMF) since contemporary children and adolescents have become active users of the most advanced technologies. They are especially susceptible to electromagnetic factors; therefore, it is necessary to have a proper insight into outcomes of such exposures for the body. The central nervous system (CNS) is one of the main targets under exposure to RF EMF. In most cases, users hold mobile phones close to their heads thereby directly exposing their brains to RF EMF. As the analysis of literature data has shown, there are few studies in this area; however, proposed options for assessing the impact of RF EMF on children and adolescents are very diverse. This part of the review focuses on various types of modeling. These are not only phantom, voxel models or the finite difference method but also new approaches such as distribution matrices, Monte Carlo simulations and an integrated radio frequency model based on the results of magnetic resonance imaging of the brain and other methods. The review provides the results obtained by investigating encephalography under exposure to RF EMF created by mobile communication devices. They are rather contradictory; however, changes in the bioelectrical activity of the brain are detected in most cases, in particular, a decrease in the alpha rhyme. Since the characteristics of sensorimotor reactions quite clearly reflect the power relations in the cerebral cortex, we analyzed changes in the parameters of simple auditory-motor and visual-motor reactions in children and adolescents who were mobile communication users. In addition, the review covers the results of changes in working capacity, fatigue, the duration of an individual minute and the reproduction of a given rhythm.

Electromagnetic fields of cellular communication as risk factors able to produce negative effects on the central nervous system of children and adolescents (review). Part 1. Modeling. parameters of electroencephalography and sensorimotor reactions

It is quite relevant to investigate possible outcomes of exposure to radio frequency electromagnetic fields (RF EMF) since contemporary children and adolescents have become active users of the most advanced technologies. They are especially susceptible to electromagnetic factors; therefore, it is necessary to have a proper insight into outcomes of such exposures for the body. The central nervous system (CNS) is one of the main targets under exposure to RF EMF. In most cases, users hold mobile phones close to their heads thereby directly exposing their brains to RF EMF. As the analysis of literature data has shown, there are few studies in this area; however, proposed options for assessing the impact of RF EMF on children and adolescents are very diverse. This part of the review focuses on various types of modeling. These are not only phantom, voxel models or the finite difference method but also new approaches such as distribution matrices, Monte Carlo simulations and an integrated radio frequency model based on the results of magnetic resonance imaging of the brain and other methods. The review provides the results obtained by investigating encephalography under exposure to RF EMF created by mobile communication devices. They are rather contradictory; however, changes in the bioelectrical activity of the brain are detected in most cases, in particular, a decrease in the alpha rhyme. Since the characteristics of sensorimotor reactions quite clearly reflect the power relations in the cerebral cortex, we analyzed changes in the parameters of simple auditory-motor and visual-motor reactions in children and adolescents who were mobile communication users. In addition, the review covers the results of changes in working capacity, fatigue, the duration of an individual minute and the reproduction of a given rhythm.

Latent Profiles of Co-occurring Sexual Problems and Posttraumatic Stress Symptoms Among Young Women Exposed to Sexual Violence.

Sexual dysfunctions (SDs) have been noted to occur following exposure to sexual violence although how these conditions covary with other mental health conditions, particularly posttraumatic stress disorder symptoms (PTSS), is relatively understudied. The current study examined patterns of co-occurring SDs and PTSS in a sample of 328 college-aged, female-identified survivors of adolescent/early adulthood sexual assault (ASA). Latent profile analysis was used to examine patterns of symptom endorsement of various types of SDs and PTSS at the symptom cluster level. Four profiles were identified: asymptomatic (41.2% of sample), sexually distressed + intrusions (24.7%), co-occurring (21%), and PTSS (13.1%). Profiles were compared to one another on various characteristics of sexual assault and social reactions from others following assault disclosure. Results indicated that those in the co-occurring symptom and PTSS profiles reported more severe ASA and more unsupportive social responses relative to the sexually distressed + intrusions and asymptomatic profiles. The asymptomatic profile was significantly less likely to have experienced rape relative to the other three profiles and was less likely to report instances where a close other treated them in a negative manner following assault disclosure. Results are discussed in light of mental health needs for young women who have experienced ASA, with implications discussed for future research and clinical services for university students.

High temperature infiltration behavior and reaction characteristics of Colima volcanic ashes on gadolinium zirconate coatings deposited by atmospheric plasma spraying

Volcanic ashes are considered a serious threat to the aircraft industry. At high temperatures, they inflict severe thermochemical damage to the typical 7 wt.% yttria-stabilized zirconia thermal barrier coatings that protect the aircraft turbine. There is a need to evaluate alternative materials with excellent resistance to infiltration of molten siliceous particles, such as gadolinium zirconate. In this work, free-standing thermal barrier coatings of gadolinium zirconate were manufactured by atmospheric plasma spraying, varying deposit parameters to obtain different relative densities to evaluate the infiltration of molten Colima volcanic ashes for 1 h and 10 h at 1250 °C. The infiltration depth and the reaction products resulting from each interaction, were studied by different characterization techniques. In general, the coatings show high resistance to the infiltration of the volcanic ashes, reaching infiltration depths between 50 µm and 80 µm after 10 h of infiltration time. In this sense, gadolinium zirconate coatings are excellent candidates against the infiltration of Colima volcanic ashes compared to the typical yttria-stabilized zirconia-based thermal barrier coatings.

Effect of heat treatment on the radial structure of coaxial polyacrylonitrile/mesophase pitch composite fiber

AbstractCoaxial composite fibers with a cortex of polyacrylonitrile (PAN) and a core layer of mesophase pitch (MP) and PAN were prepared by wet spinning, then heat‐treated in air. The effects of heat treatment on the thermal reaction characteristics, pre‐oxidation degree, radial structure, and thermal stability of coaxial composite fibers were studied by differential scanning calorometry, Raman, and thermogravimetric analysis. As the heat treatment temperature increases, the coaxial composite fibers only undergo cyclization without oxidation, the peak temperature of the thermal reaction increases from 258 to 270°C, and the enthalpy increases from 19.66 to 237.82 J g−1, the heat mainly arises from the PAN component. The Dr value of the coaxial fiber skin layer increases from 0.193 to 0.255 (330°C) and then decreases to 0.236; the core layer Dr value increases from 0.353 to 0.392 (310°C) and then decreases to 0.368. The pre‐oxidation reaction leads to an increase in sp2‐hybridized carbons and an increase in pre‐oxidation degree. When the heat treatment temperature <310°C, the pre‐oxidation degree of the composite fibers increases, leading to formation of a more stable structure compared with that at lower temperatures and an increase in the carbon residue rate.

Systematic analysis of dual-functional catalysts for simultaneous CO-NOx reduction: Toward an effective catalyst design strategy

The development of a multifunctional catalyst suitable for application in existing facilities with limited space, with specific emphasis on its capability to concurrently remove CO and NOx is vital for meeting stringent environmental regulations. This is particularly pertinent to industries such as liquefied natural gas-based power plants and multipollutant-emitting industrial facilities. Another important consideration is that the catalyst should operate over a wide temperature range to facilitate its application across various industrial sites. In this study, we synthesized vanadium-based catalysts with a series of noble metals (Pt, Pd, and Au). The V–W–Pd/TiO2 catalyst achieved a simultaneous CO–NOx reduction efficiency greater than 90% in the widest temperature range, 228–321 °C. The excellent catalytic activities resulted from the Pd active sites, which oxidated CO and adsorbed NOx. This enables the catalyst to easily participate in the NH3-SCR reaction and facilitates NOx reduction. Moreover, we systematically analyzed the reaction properties of each catalyst using diffuse reflectance infrared Fourier transform and temperature programmed desorption methods. This enabled the elucidation of the reaction characteristics and competitive adsorption properties of the catalysts.

Numerical modeling of triply period minimal surface structures with catalyst coating for hydrogen production of methanol steam reforming

The catalyst support structure has a significant influence on the performance of the methanol steam reforming (MSR) microreactor for in-situ hydrogen production. Triply period minimal surface (TPMS) structures are emerging as an attractive option as porous MSR catalyst supports owing to their excellent specific surface area, smooth surface and highly interconnected pores. This paper develops a numerical model of the sheet TPMS unit structures with catalyst coating to investigate the flow and reaction characteristics for hydrogen production of MSR reaction. The P, G, and D curved surface structural models were constructed with different porosities. The numerical results indicated that the P curved surface structure with the porosity of 90% had the lowest pressure drop of 0.15 Pa and the highest permeability of 6.31 × 10−9 m2, while the G curved surface structure always demonstrated excellent flow performance within the porosity range of 50–90%. The D curved surface structure exhibited the best reaction performance with hydrogen production exceeding P and G curved surface structures by about 23% and 78% respectively. Furthermore, the performance differences between the two flow phases of the sheet TPMS structures were investigated for the bicontinuous characteristic. The flow phases of the G curved surface structure demonstrated the best consistency in flow and reaction performances. Finally, the optimal design of the sheet, network, and multi-unit heterogeneous TPMS structural catalyst supports was discussed.

Co, Ni and Cu-doped Ca2Fe2O5-based oxygen carriers for enhanced chemical looping hydrogen production

Oxygen carrier determines the output characteristics of the chemical looping cycle reaction and is a key factor affecting the chemical looping hydrogen production (CLH) process. In this work, the effect of different dopants (Co, Ni and Cu) on Ca2Fe2O5 brownmillerite-type oxygen carriers and the feasibility of low doping were investigated in an attempt to improve CO conversion and hydrogen yield in the CLH reaction. The redox activity of the transition metal doped oxygen carriers was significantly enhanced. The fuel conversion of CaFeNi was increased to 1.29 times. The average hydrogen yield of CaFeCo was as high as 102.20 mL/g, which was 1.58 times that of CaFe. In addition, density functional theory calculations show that metal-doped Ca2Fe2O5 reduced the energy of oxygen vacancy formation, but they bore a significant energy barrier in the formation of hydrogen molecules. These findings may provide ideas for the modification of oxygen carriers for the CLH process.

Heparin as a Potential Therapeutic Substance for Post-Traumatic Stress Disorder.

In sexually mature male Wistar rats with modeled post-traumatic stress disorder, personalized characteristics of neurobiological reactions in the population of predator-induced stress-resilient and stress-susceptible heparinized animals were determined. Characteristics of the systemic response of immune mechanisms, hypothalamic-pituitary-adrenal axis, behavioral manifestations, as well as basic properties of the CNS (excitation/inhibition) are presented. The study demonstrated encouraging positive results of the course administration of unfractionated heparin at a dose below the therapeutic and prophylactic doses. The inclusion of heparin drugs into the clinical practice for the treatment of post-traumatic stress disorder will not require large-scale clinical trials, because many effects of heparin as a nonspecific adaptogen are well studied. Moreover, these properties were confirmed at a higher technological level during the COVID-19 pandemic.

Study on gasification reaction and energy conversion characteristics of the entrained flow coal gasification based on chemical kinetics simulation

Coal gasification that converts coal into syngas is a promising technology for efficient and clean utilization of coal. Current simulations of coal gasification are mostly based on equilibrium reactions, which cannot reflect the residence time and carbon conversion rate. In this paper, the reliable chemical kinetics simulation of the coal gasification is carried out considering the solid residence time and the effects of the main parameters on the gasification performance are analyzed. The results show that the higher the O2/coal ratio, the higher the carbon conversion rate until it reaches 100 %. However, an excessively high O2/coal ratio will reduce the cold gas efficiency. Therefore, the ideal cold gas efficiency is further proposed, revealing the energy saving potential of the system by reusing the ungasified coal. Based on this, the energy conversion characteristics of the combined cycle system were analyzed, showing that the effective conversion of coal to synthetic gas is the key to improving efficiency.

IMMUNOHISTOCHEMICAL CHANGES IN RAT LYMPH NODES DURING INTRALYMPHATIC IMMUNOSTIMULATION WITH ACID PEPTIDOGLYCAN

The purpose of this research was to study the characteristics of the immunohistochemical reaction of lymph nodes after intralymphatic immunostimulation with acid peptidoglycan in a rat model. Material and Methods: Immunostimulation was modeled in groups by introducing APG with a molecular weight of 1000–40000 kDa at a dose of 0.3 U. The drug was administered intramuscularly in the comparison group (n=30) and intralymphatically in the main group (n=30), on days 1, 2, 3, 8, 9, 10 of the experiment. Hyaluronidase was used as a lymphotropic substance at a dose of 0.07 U. We used Bcl-2 rabbit antibodies, сlone: SP66 (Roche, Switzerland) and CD-3 antibodies (PrimeBioMed, Russia). The UltraVision Quanto Detection System HRP Polymer (ThermoFisher, USA) was used as a detection system. Results: Intralymphatic administration of APG gives an immunostimulating effect on the third day from the start of administration. Meanwhile, with intramuscular immunostimulation, the effect occurred only on the seventh day of the experiment (p≤0.05). Immunohistochemical studies using Bcl-2 and CD-3 showed the effectiveness of APG as an immunostimulator, which was confirmed by increased expression of CD-3+, while an increase in the pool of Bcl-2+ cells indicated strengthened barrier and anti-apoptotic properties of lymph nodes. The duration of the immunostimulating effect depended on the route of APG administration. With the lymphatic route of administration, the effect occurred on the third day, with the intramuscular route – on the seventh day from the start of administration of the immunostimulant (p≤0.05). Conclusion: An APG based drug stimulates the expression of genes for signaling receptors of immune effectors, which increases their sensitivity to pathogens of various natures and elicits an adequate immune response in the body.

Model-based process intensification of deep eutectic solvent treatment of eucalyptus slabs for lignin extraction and pulp production

This work revealed the reaction characteristics in the delignification process of eucalyptus slabs catalyzed by acidic deep eutectic solvent (benzyltriethylammonium chloride/formic acid) from the perspective of heterogeneous reactions. The limitation of internal diffusion on delignification process cannot be ignored. Afterwards, a kinetic model based on cell wall structure was proposed to describe the relationship between the delignification degree and reaction conditions, and it also hold excellent predictive ability for lignin removal, carbohydrate retention and solid residue yield. Compared with other reported kinetic models, this novel model not only took into account all operational parameters of reaction process, but also can be applied to the entire reaction process without the need for segmentation. Besides, an essential requirement based on the developed model was a 44.40 wt% formic acid concentration and a temperature of 130 °C, when the purpose of DES treatment was pulping. Generally, this work could provide guidance on process adjustments and product quality control during the DES processing.

Synergistic catalytic mechanism of red mud in the co-gasification of spirit-based distillers’ grains and sewage sludge

Experiments of co-gasification of spirit-based distillers’ grains (SDG) and sewage sludge (SS) were carried out with red mud (RM) by using a self-designed fixed-bed gasifier. The effects of RM addition, gasification reaction temperature, SS and SDG blending ratio and other factors on the gasification reaction characteristics and synergism were investigated. The results are as follow: RM had catalytic effect on SS and SDG co-gasification, which can enhance the gasification reaction and H2 yield; increasing the temperature can enhance the gasification reaction and reduce the syngas H2/CO; with the increase of SDG, the H2 yield gradually grew; with the rise of SS, the gasification reaction gradually augmented. The catalytic mechanism was mainly due to the redox cycle of Fe2O3 in RM, which can promote the water transfer reaction. At the same time, the eutectic mixture of K, Na, Ca, Fe and other metal elements at high temperatures was the main reason for the synergistic effect.

Impact of the Potential Dependent Surface Adlayer Composition on the ORR Activity and H2O2 Formation on Ru(0001) in Acid Electrolytes

AbstractStimulated by the increasing interest in ion adsorption effects on electrocatalytic reactions and by recent more detailed reports on the potential dependent adlayer structures formed on Ru(0001) in pure HClO4 and H2SO4 electrolytes, we revisited the oxygen reduction reaction (ORR) on structurally well‐defined Ru(0001) single crystal surfaces prepared under ultrahigh vacuum conditions. We demonstrate that the complex, potential‐dependent activity both for the ORR and for H2O2 formation is closely related to potential‐dependent changes in the composition and structure of the adlayer. Our results demonstrate the enormous effects adsorbed species can have on the ORR reaction characteristics, either by surface blocking, e. g., by (co‐)adsorbed bisulfate species, or by participation in the reaction, e. g., by *H transfer from adsorbed H or OH to O2. The comparison with results obtained on polycrystalline Ru, which differ significantly from Ru(0001) data, furthermore underlines the importance of using structurally well‐defined surfaces as a reference system for future theoretical studies.

Effect of hydrogen permeation and operating parameters on thermochemical performance of solar-driven steam methane reforming membrane reactor

When the steam methane reforming membrane reactor is coupled with trough solar collector to achieve solar thermochemical energy storage, the dimension of the membrane reactor is enlarged and the catalyst filling amount increases dramatically. As a results, the hydrogen permeation property should be well addressed to match the permeation and the reaction characteristics for a better energy storage performance. In the present paper, the effect of hydrogen permeation, including the effective permeation area and the membrane permeance was investigated by numerical simulations. Results show that the sensitivity factors of the membrane surface area on CH4 conversion, H2 yield and H2 recovery are 0.379, 0.325 and 2.196 respectively while that of membrane permeance are 0.007, 0.009 and 0.488 respectively. This indicates that influence of membrane surface area is more remarkable and H2 recovery is the most sensitive to the hydrogen permeation. The reactor with a membrane tube diameter of 50 mm and a permeance of 1.07 × 10−2 mol/(m2·s·Pa0.62) can achieve best reaction performance. Besides the reaction performance, a solar thermochemical system is proposed and a solar-to-fuel efficiency is defined to evaluate the thermochemical performance. Again the aforementioned reactor has the highest solar-to-fuel efficiency which can exceed 70 %. Furthermore, for a better thermochemical performance, lower inlet mass flow rate and higher inlet temperature are recommended, but too small or too high values should be avoided to maintain the operating temperature of the membrane. A suitable combination of pressures in the reaction side and the permeating side is also suggested. The results of the present paper reveal the role of hydrogen permeation and helps the reactor design.

A literature review and expert consensus statement on diagnostics in suspected metal implant allergy.

Although rare, allergic reactions to metal implants represent a diagnostic challenge in view of missing guidelines. To develop an European expert consensus on characteristics of metal allergy reactions and the utility of various diagnostic tools in suspected metal implant allergy. A nominal group technique (NGT) was applied to develop consensus statements. Initially an online literature database was created on a secure server to enable a comprehensive information. Twenty-three statements were formulated on potential aspects of metal implant allergy with a focus on diagnostics and grouped into five domains. For the consensus development, the panel of 12 experts initially did refine and reformulate those statements that were ambiguous or had unclear wording. By face-to-face (9/12) or virtual participation (3/12), an anonymous online voting was performed. Consensus (≥80% of agreement) was reached in 20/23 statements. The panel agreed that implant allergy despite being rare should be considered in case of persistent unexplained symptoms. It was, however, recommended to allow adequate time for resolution of symptoms associated with healing and integration of an implant. Obtaining questionnaire-aided standardized medical history and standardized scoring of patient outcomes was also considered an important step by all experts There was broad consensus regarding the utility/performance of patch testing with additional late reading. It was recognized that the lymphocyte transformation test (LTT) has to many limitations to be generally recommended. Prior to orthopaedic implant, allergy screening of patients without a history of potential allergy to implant components was not recommended. Using an expert consensus process, statements concerning allergy diagnostics in suspected metal implant allergy were created. Areas of nonconsensus were identified, stressing uncertainty among the experts around topics such as preoperative testing in assumed allergy, histological correlate of periimplant allergy and invitro testing, which underscores the need for further research.

Guarding Our Guardians: Navigating Adverse Reactions in Healthcare Workers Amid Personal Protective Equipment (PPE) Usage During COVID-19.

The widespread utilization of personal protective equipment (PPE) during the COVID-19 pandemic has been crucial for reducing transmission risk among healthcare workers (HCWs) and the public. However, the extensive use of PPEhas brought about potential adverse reactions, particularly among HCWs. This study aims to investigate the prevalence and characteristics of adverse skin reactions associated with PPE use among different categories of HCWs, including faculty, residents, and nursing officers (NOs), in a dedicated tertiary care COVID-19 hospital. The study design was a hospital-based cross-sectional analytical study conducted over one month, involving a total of 240 participants. The participants were required to complete a pre-tested semi-structured questionnaire that covered demographic information, PPE-related data, preventive measures, observed reactions, and self-management strategies. Results indicated that adverse skin reactions were common among HCWs, with reactions reported by all participants. The most commonly used PPE included N95 masks, goggles, gloves, face shields, isolation gowns, and medical protective clothing. Excessive sweating (60% residents, 21.1% NOs, and 16.25% faculties), facial rash, dry palms (>70% of HCWs), and itching were among the most prevalent adverse reactions. Urticarial lesions (28.5% among NOs), pressure marks and pain (100% on the cheek among all HCWs), fungal infections (18.5% among residents at the web space of fingers), and skin breakdown were also reported. Factors such as age, gender, pre-existing skin problems, and oily/acne-prone skin history were found to be significantly associated with adverse skin reactions. In conclusion, the findings highlight the common adverse reactions reported by HCWs during the use of different PPEs. Certain steps taken by HCWs for the prevention of adverse reactions due to PPE emphasize the importance of tailored preventive measures and strategies to mitigate these adverse reactions, such as proper PPE selection, well-fitting equipment, regular breaks, and appropriate skincare practices. These insights contribute to the development of guidelines for optimal PPE usage and support the well-being of HCWs in their essential roles.

Study on characteristics of toluene/chlorobenzene nitrification in different microreactors

Aromatic nitrification with mixed acid is an important industrial reaction with fast, strong-exothermic, and high-risk reaction characteristics. To investigate the promotion for the preparation of nitrotoluene (MNT) and nitrochlorobenzene (NCB), three microreactors with different structural features, namely, heart-shaped, diamond-shaped, and zigzag-shaped microreactors, are designed and fabricated. Firstly, the effects of temperature, residence time, and molar ratio on toluene (TOL) and chlorobenzene (CB) nitrification are investigated, and orthogonal experiments are further conducted to determine the optimum reaction conditions. Results showed that channel structures and the residence time τ have negligible effects on the isomers selectivity of the three microreactors, and higher reaction temperatures and mole ratios would lead to the substantial occurrence of side reactions and byproducts in the zigzag microreactor. The heart-shaped microreactor has the highest value of 91.49 % for the MNT's optimal yield, followed by the diamond-shaped and zigzag-shaped microreactors (89.91 % and 89.81 %, respectively). The heart-shaped microreactor provides the maximum amount of NCB preparation (93.95 %), while the yields of the diamond-shaped and zigzag-shaped microreactors are 91.51 % and 88.25 %, respectively. This work provides the experimental basis for the efficient preparation and industrial scale-up of aromatic nitrification in microreactors.

Event-triggered passivity and synchronization of multiple derivative coupled reaction–diffusion neural networks

The paper studies the event-triggered passivity and synchronization problems for multiple derivative coupled reaction–diffusion neural networks. Two types of multiple derivative coupled reaction–diffusion neural networks, with and without time-varying delay, are considered. According to the characteristics of multiple derivative coupled reaction–diffusion neural networks, an event-triggered condition is constructed. By imposing appropriate Lyapunov functionals and inequality techniques, several passivity conditions are established for these two networks under the designed event-triggered controllers. Then, synchronization criteria of these two networks are derived based on the relationship between output-strict passivity and synchronization. Moreover, the non-occurrence of the Zeno behavior in the proposed control is proved. Numerical example is illustrated to verify the effectiveness of the proposed criteria. Finally, theoretical results and the associated image encryption application are validated through numerical simulations and statistical analyses.