Channel Data Research Articles

Energy-flow-reversing dynamics in vortex beams: OAM-independent propagation and enhanced resilience

Since their discovery in the 1990s, vortex beams, known for their ability to carry orbital angular momentum (OAM), have found substantial applications in optical manipulation and high-dimensional classical and quantum information communication. However, their inherent diffraction in free space, resulting in OAM-dependent beam expansion, has constrained their utility in spatial mode multiplexing communication, fiber optic transmission, and particle manipulation. These domains necessitate vortex beams with OAM-independent propagation characteristics. Addressing this, we report an approach that employs the energy redistribution mechanism to reverse the radial energy flows of traditional vortex beams, thereby presenting iso-propagation vortex beams (IPVBs) with OAM-independent propagation dynamics. These IPVBs, attributed to their reversed radial energy flows, maintain resilience in diverse environments, from free space to challenging media, including sustaining their form post-damage, retaining consistent intensity in lossy media, and experiencing reduced modal scattering in atmospheric turbulence. Their unique features position IPVBs as promising candidates for applications in imaging, microscopy, optical communication, metrology, quantum information processing, and light-matter interactions. Case studies within optical communication reveal that the IPVB basis potentially unlocks a broader spectrum of data channels, enhancing information capacity over traditional spatial multiplexing techniques.

Investigation of THOR-AV 5F Biofidelity in Sled Test Conditions with A Semi-Rigid Seat.

THOR-AV 5F, a modified THOR-5F dummy, was designed to represent both upright and reclined occupants in vehicle crashworthiness studies. The dummy was evaluated in four test conditions: a) 25° seatback, 15 km/h, b) 25° seatback, 32 km/h, c) 45° seatback, 15 km/h, d) 45° seatback, 32 km/h. The dummy's biomechanical responses were compared against those of postmortem human subjects (PMHS) tested in the same test conditions. The latest National Highway Traffic Safety Administration (NHTSA) BioRank method was used to provide a biofidelity ranking score (BRS) for each data channel in the tests to assess the dummy's biofidelity objectively. The evaluation was categorized into two groups: restraint system and dummy. In the four test conditions, the restraint system showed good biofidelity with BRS scores of 1.49, 1.47, 1.15, and 1.79, respectively. The THOR-AV 5F demonstrated excellent biofidelity in three test conditions: 25° seatback, 15 km/h (BRS = 0.76); 25° seatback, 32 km/h (BRS = 0.89); and 45° seatback, 32 km/h (BRS = 0.93). In the fourth test condition, 45° seatback, 15 km/h, the dummy demonstrated good biofidelity with a BRS score of 1.06. The dummy demonstrated good durability. No damage was identified with a full inspection conducted after the tests.

Quantification of EEG Characteristics for Epileptic Seizure Detection and Monitoring of Anaesthesia Using Spectral Analysis

Epilepsy is considered one of the primary neurological disorders, and its treatment requires abundant technological assistance. General Anaesthesia induces distinct patterns in brain activity, with the most common being a gradual increase in low-frequency signals as the level of Anaesthesia deepens. In this instance, a method of validating epileptic seizures and Anaesthesia through the utilization of electroencephalogram (EEG) data, acquired non-invasively, is introduced. Epileptic seizures and detection of the presence of Anaesthesia approaches make use of discrete Laplace Transformation (LT), Discrete Cosine Transformation (DCT), and Fast Fourier Transform (FFT). Here, it is discussed how power spectral analysis (PSA) helps study EEG characteristics in detecting epileptic behavior and the presence of Anaesthesia. A dataset of EEG (Epileptic and Anaesthesia), which is available publicly [1,2], has been used in the propounded technique using FIR filters and LT, DCT, and FFT are used to store and process 16 channel data. Power Spectrum Density (PSD) and its average were contrasted against a specific spectrum and frequency range of a typical EEG signal to obtain the results. This work uses a technique to determine whether the patient being studied is epileptic and awake or anesthetized.

Application and Research of Microseismic Monitoring System and Hydraulic Fracturing Technology in Coal Mines

In order to improve the effectiveness of coal mine gas control and enhance the level of coal mine safety production, the application of a microseismic monitoring system and hydraulic fracturing technology in coal mines was studied. Applying hydraulic fracturing technology to coal mine gas treatment, firstly, the geological structure and gas concentration in the mining area are detected using the radio tunnel perspective method and infrared differential absorption method. Then, the relevant parameters of hydraulic fracturing are determined, and finally, hydraulic fracturing technology is implemented. Microseismic monitoring technology is used to monitor the cracks formed during hydraulic fracturing construction and evaluate the fracturing effect. The instantaneous energy envelope is obtained from the microseismic data of each detection channel after stacking and Hilbert transform static correction. A microseismic in-phase inversion positioning objective function based on travel time residuals is constructed, and under the constraints of polarization analysis, the optimal solution is obtained through search iteration to complete microseismic in-phase inversion positioning. Experimental results have shown that after applying this method to coal mine gas control, the gas concentration decreases below the execution standard, achieving good control effects. Under microseismic monitoring in coal mines, the hydraulic fracturing effect can be effectively and reasonably evaluated, and the safety production level of coal mines can be improved.

Communication channel parameters estimation using a ray tracing model in heterogeneous networks

Currently, modern networks LTE, Wi-Fi, 5GNR are combined into a single heterogeneous network, which leads to an increase in intra-system interference. According to the integrated optimization method, to distribute data flows in a heterogeneous network, taking into account the intra-system interference influence, the collective dynamic routing method is used. At the analysis stage of this method it is necessary to estimate the channel data rate in all valid routes. To obtain correct channel data rates estimates, it is necessary to reliably estimate the channel matrix. Today, the ray tracing model is widely used to estimate the channel matrix. The verification results of the using ray tracing model given in [1] show the need for additional research to increase the channel matrix estimates reliability. Therefore increasing the reliability of channel matrix transmission coefficients estimates by analyzing the influence of the number of rays taken into account is the actual task. The work analyzes the influence of the number of rays taken into account on the reliability of estimating the complex transmission coefficients of the channel matrix for the cases of the presence and absence of line of sight be-tween the transmitter and the receiver. Expressions are obtained to take into account the influence of diffracted, singly reflected and passed through an obstacle rays. A program has been developed to find all possible rays arriving at the receiver location point and determine their parameters based on a digital 3D map indicating the map objects materials. Using the developed program, it is shown that taking into account the influence of additional rays makes it possible to increase the channel matrix estimation reliability, and therefore, the modified ray tracing model can be used to estimate channel data rates when applying the collective dynamic routing method in heterogeneous net-works.

Attention-ProNet: A Prototype Network with Hybrid Attention Mechanisms Applied to Zero Calibration in Rapid Serial Visual Presentation-Based Brain-Computer Interface.

The rapid serial visual presentation-based brain-computer interface (RSVP-BCI) system achieves the recognition of target images by extracting event-related potential (ERP) features from electroencephalogram (EEG) signals and then building target classification models. Currently, how to reduce the training and calibration time for classification models across different subjects is a crucial issue in the practical application of RSVP. To address this issue, a zero-calibration (ZC) method termed Attention-ProNet, which involves meta-learning with a prototype network integrating multiple attention mechanisms, was proposed in this study. In particular, multiscale attention mechanisms were used for efficient EEG feature extraction. Furthermore, a hybrid attention mechanism was introduced to enhance model generalization, and attempts were made to incorporate suitable data augmentation and channel selection methods to develop an innovative and high-performance ZC RSVP-BCI decoding model algorithm. The experimental results demonstrated that our method achieved a balance accuracy (BA) of 86.33% in the decoding task for new subjects. Moreover, appropriate channel selection and data augmentation methods further enhanced the performance of the network by affording an additional 2.3% increase in BA. The model generated by the meta-learning prototype network Attention-ProNet, which incorporates multiple attention mechanisms, allows for the efficient and accurate decoding of new subjects without the need for recalibration or retraining.

ASL MRI Denoising via Multi Channel Collaborative Low-Rank Regularization.

Arterial spin labeling (ASL) perfusion MRI is the only non-invasive imaging technique for quantifying regional cerebral blood flow (CBF), which is a fundamental physiological variable. ASL MRI has a relatively low signal-to-noise-ratio (SNR). In this study, we proposed a novel ASL denoising method by simultaneously exploiting the inter- and intra-receive channel data correlations. MRI including ASL MRI data have been routinely acquired with multi-channel coils but current denoising methods are designed for denoising the coil-combined data. Indeed, the concurrently acquired multi-channel images differ only by coil sensitivity weighting and random noise, resulting in a strong low-rank structure of the stacked multi-channel data matrix. In our method, this matrix was formed by stacking the vectorized slices from different channels. Matrix rank was then approximately measured through the logarithm-determinant of the covariance matrix. Notably, our filtering technique is applied directly to complex data, avoiding the need to separate magnitude and phase or divide real and imaginary data, thereby ensuring minimal information loss. The degree of low-rank regularization is controlled based on the estimated noise level, striking a balance between noise removal and texture preservation. A noteworthy advantage of our framework is its freedom from parameter tuning, distinguishing it from most existing methods. Experimental results on real-world imaging data demonstrate the effectiveness of our proposed approach in significantly improving ASL perfusion quality. By effectively mitigating noise while preserving important textural information, our method showcases its potential for enhancing the utility and accuracy of ASL perfusion MRI, paving the way for improved neuroimaging studies and clinical diagnoses.

FLEX: FLexible Transducer With External Tracking for Ultrasound Imaging With Patient-Specific Geometry Estimation.

Flexible array transducers can adapt to patient-specific geometries during real-time ultrasound (US) image-guided therapy monitoring. This makes the system radiation-free and less user-dependency. Precise estimation of the flexible transducer's geometry is crucial for the delay-and-sum (DAS) beamforming algorithm to reconstruct B-mode US images. The primary innovation of this research is to build a system named FLexible transducer with EXternal tracking (FLEX) to estimate the position of each element of the flexible transducer and reconstruct precise US images. FLEX utilizes customized optical markers and a tracker to monitor the probe's geometry, employing a polygon fitting algorithm to estimate the position and azimuth angle of each transducer element. Subsequently, the traditional DAS algorithm processes the delay estimation from the tracked element position, reconstructing US images from radio-frequency (RF) channel data. The proposed method underwent evaluation on phantoms and cadaveric specimens, demonstrating its clinical feasibility. Deviations in tracked probe geometry compared to ground truth were minimal, measuring 0.50 ± 0.29 mm for the CIRS phantom, 0.54 ± 0.35 mm for the deformable phantom, and 0.36 ± 0.24 mm on the cadaveric specimen. Reconstructing the US image using tracked probe geometry significantly outperformed the untracked geometry, as indicated by a Dice score of 95.1 ± 3.3% versus 62.3 ± 9.2% for the CIRS phantom. The proposed method achieved high accuracy (<0.5 mm error) in tracking the element position for various random curvatures applicable for clinical deployment. The evaluation results show that the radiation-free proposed method can effectively reconstruct US images and assist in monitoring image-guided therapy with minimal user dependency.

РАДИОМЕТРИЧЕСКАЯ КОРРЕКЦИЯ И ТЕМАТИЧЕСКАЯ ОБРАБОТКА ДАННЫХ ПРИБОРА МСУ-ГС/ВЭ ВЫСОКОЭЛЛИПТИЧЕСКОГО КОСМИЧЕСКОГО АППАРАТА “АРКТИКА-М” № 1 С ПРИМЕНЕНИЕМ МЕТОДОВ МАШИННОГО ОБУЧЕНИЯ

The paper presents the research work aimed at improving the quality characteristics of information products based on the MSU-GS/VE radiometer aboard the Arktika-M No. 1 satellite, as well as at obtaining data preprocessing products. All described methods are based on using machine learning algorithms, namely, neural networks of various architectures. The results of developing a technology for minimizing the interference that occurs in the channels of the satellite device are provided. The work on detecting cloud formations based on processing the channel data in the visible and infrared ranges is presented. It is shown that the use of neural networks makes it possible to implement automatic algorithms for obtaining thematic products that take into account various factors and have an accuracy that is commensurate with statistical and physical approaches and reduces the time of satellite data processing.

Channel Modeling Based on Transformer Symbolic Regression for Inter-Satellite Terahertz Communication

Channel modeling is crucial for inter-satellite terahertz communication system design. The conventional method involves manually constructing a mathematical channel model, which is labor-intensive, and using a neural network directly as a channel model lacks interpretability. This paper introduces a channel modeling approach based on symbolic regression. It is the first time that using transformer neural networks as the implementation tool of symbolic regression to generate the mathematical channel model from the channel data directly. It can save manpower and avoid the interpretability issue of using neural networks as a channel model. The feasibility of the proposed method is verified by generating a free space path loss model from simulation data in the terahertz frequency band.

Hybrid RSA–AES-Based Software-Defined Network to Improve the Security of MANET

Abstract Software-defined networking offers a flexible and programmatically efficient network design. Security in today’s ad hoc mobile wireless network is paramount and incredibly challenging. Software-defined network is used to automatically and dynamically manage and control large network devices, network services, traffic paths, network topology, and packet management (quality of service). Recently different attackers are attacking our data when forwarding from one device to another. Therefore, software-defined networking and a Hybrid Rivest, Shamir, and Adelman (RSA)–Advanced Encryption Standard (AES) cryptography algorithm are needed to establish the concept of software-defined networking in mobile ad hoc networks to improve security and routing efficiency. The proposed Hybrid Cryptography Algorithm (HCA)-Based SDN mainly creates strong detection, prevention, and authentication mechanisms for MANET. The proposed secure data channel throughput increased by 0.4%, and the suggested system latency was 3.6% lower than the Normal MANET. It is already proved that the Hybrid cryptography algorithm also generates a key for security faster than RSA (Rivest, Shamir, and Adelman). The performance of the RSA–AES (hybrid) approach for encrypting and decrypting broad data significantly beats the RSA-Blowfish algorithm. In decrypting files, the hybrid approach (RSA–AES) outperforms the RSA-Blowfish method 11.2 times more efficiently when the file size is 32 kB; however, efficiency is increased by 77.1 times when the file size exceeds 4,096 kB. The experimental result shows that as the file size increases the hybrid RSA–AES solution outperforms RSA when the file is only 145 bytes; however, when the file is 6,460 bytes in size, the efficiency is multiplied by 61.3. As file size increases, RSA is less efficient than the hybrid encryption method. This is more preferred to be implemented for different parts of wireless networks like MANET.

Realization of 4 × 200 Gbps 4-QAM OFDM-OWC System Using Higher Order OAM Modes for HAP-to-Satellites Scenario

Recently, there has been an increase in interest in using optical wireless communication (OWC) links on high-altitude platforms (HAPs) for satellite applications. We implement an orbital angular momentum (OAM) multiplexed orthogonal frequency division multiplexing (OFDM) system using an OWC link. A space-to-air scenario is considered in which transmission pointing errors, geometric loss, turbulence, and additional link losses are taken into account to extend the transmission range, system capacity, and throughput. At 200 Gbps per channel data rate, four different OAM modes are implemented with higher order Laguerre–Gaussian (LG) modes of [0,0], [0,13], [0,40], and [0,80]. An aggregate 800 Gbps data rate can deliver a maximum OWC range of 3300–5000 km for all channels. The maximum received power over the 1000 km range is −19.34 to −32.59 dBm with an additional gain of 0–2.5 dB. It is also possible to obtain a better performance over large distances of 500–3500 km with an error vector magnitude of 2.98–17.5%. Furthermore, a high gain of −40.80 dB, a signal-to-noise ratio (SNR) of 55.21 dB, and an optical SNR of 67.25 dB can be achieved for varied transmitter pointing errors of 0.1 rad. As compared to other literature, this system exhibits a superior performance.

Optimizing motion imagery classification with limited channels using the common spatial pattern-based integrated algorithm.

The extraction of effective classification features from electroencephalogram (EEG) signals in motor imagery is a popular research topic. The Common Spatial Pattern (CSP) algorithm is widely employed in this field. However, the performance of the traditional CSP method depends significantly on the choice of a specific frequency band and channel number of EEG data. Furthermore, inter-class variance among these frequency bands and the limited number of available EEG channels can adversely affect the CSP algorithm's ability to extract meaningful features from the relevant signal frequency bands. We hypothesize that multiple Intrinsic Mode Functions (IMFS), into which the raw EEG signal is decomposed, can better capture the non-Gaussian characteristics of the signal, thus compensating for the limitations of the CSP algorithm when dealing with nonlinear and non-Gaussian distributed data with few channels. Therefore, this paper proposes a novel method that integrates Variational Mode Decomposition (VMD), Phase Space Reconstruction (PSR), and the CSP algorithm to address these issues. VMD is used to filter and enhance the quality of the collected data, PSR is employed to increase the effective data channels (data augmentation), and the subsequent CSP filtering can obtain signals with spatial features, which are decoded by Convolutional Neural Networks (CNN) for action decoding. This study utilizes self-collected EEG data to demonstrate that the new method can achieve a good classification accuracy of 82.30% on average, confirming the improved algorithm's effectiveness and feasibility. Furthermore, this study conducted validation on the publicly available BCI Competition IV dataset 2b, demonstrating an average classification accuracy of 87.49%.

A high-precision fusion bathymetry of multi-channel waveform curvature for bathymetric LiDAR systems

Airborne LiDAR bathymetry (ALB) system is an attractive and efficient method for nearshore bathymetry and underwater topography mapping. To ensure and improve the measurement accuracy and reliability in various water environments, different receivers using a segmented field of view (FOV) have been designed and are implemented in ALB. These are used to obtain various echo data of multiple channels and perform bathymetry at various water depths. However, in echo waveform processing, detailed information about the water body described by the different echo waveforms is lacking, making it difficult to overcome severe waveform superposition in extremely shallow areas or to separate the weak echo of the water bottom from the noise in extremely deep areas. Therefore, we employed a novel method of multi-channel waveform fusion bathymetry (MWFB) to achieve information complementarity, gain multi-channel waveforms, and detect the robustness of water and bottom echo signals. This method uses an adaptive signal waveform extraction of a multichannel fusion mechanism to eliminate systematic and random noise, and the waveform curvature is used to reconstruct the energy–waveform curves. Iterative decomposition based on waveform curvature and energy curves was conducted to improve the correctness of waveform decomposition and the reliability of waveform components. Furthermore, the water surface and bottom peaks were detected based on the multichannel waveform curvature, which enabled acquisition of the accurate temporal positions of the peaks and achieve high-accuracy bathymetry. According to the experimental results and a comparison with reference datasets, the highest bathymetric accuracy of the MWFB method reached an RMSE of 0.22. For the different study areas, the bathymetric accuracy of the slope reached 95%, 92%, and 97% at Ganquan Island, Lingyang Reef, and Bei Island, respectively. Furthermore, the bathymetric point numbers were effectively increased and bathymetric accuracy was also improved in shallow and deep water, which illustrates the superior bathymetric performance of the MWFB method and its ability to provide a high-efficiency waveform dataset through multi-channel data fusion. The novel LiDAR bathymetric method proposed in this study can effectively achieve high-accuracy nearshore bathymetry and seafloor topographical mapping.

FNIRS is capable of distinguishing laterality of lower body contractions.

The use of functional near-infrared spectroscopy (fNIRS) for brain imaging during human movement continues to increase. This technology measures brain activity non-invasively using near-infrared light, is highly portable, and robust to motion artifact. However, the spatial resolution of fNIRS is lower than that of other imaging modalities. It is unclear whether fNIRS has sufficient spatial resolution to differentiate nearby areas of the cortex, such as the leg areas of the motor cortex. Therefore, the purpose of this study was to determine fNIRS' ability to discern laterality of lower body contractions. Activity in the primary motor cortex was recorded in forty participants (mean = 23.4years, SD = 4.5, female = 23, male = 17) while performing unilateral lower body contractions. Contractions were performed at 30% of maximal force against a handheld dynamometer. These contractions included knee extension, knee flexion, dorsiflexion, and plantar flexion of the left and right legs. fNIRS signals were recorded and stored for offline processing and analysis. Channels of fNIRS data were grouped into regions of interest, with five tolerance conditions ranging from strict to lenient. Four of five tolerance conditions resulted in significant differences in cortical activation between hemispheres. During right leg contractions, the left hemisphere was more active than the right hemisphere. Similarly, during left leg contractions, the right hemisphere was more active than the left hemisphere. These results suggest that fNIRS has sufficient spatial resolution to distinguish laterality of lower body contractions. This makes fNIRS an attractive technology in research and clinical applications in which laterality of brain activity is required during lower body activity.

Analysis of pressure-activated Piezo1 open and subconductance states at a single channel level

Mechanically activated Piezo1 channels undergo transitions from closed to open-state in response to pressure and other mechanical stimuli. However, the molecular details of these mechanosensitive gating transitions are unknown. Here, we used cell-attached pressure-clamp recordings to acquire single channel data at steady-state conditions (where inactivation has settled down), at various pressures and voltages. Importantly, we identify and analyze subconductance states of the channel which were not reported before. Pressure-dependent activation of Piezo1 increases the occupancy of open and subconductance state at the expense of decreased occupancy of shut-states. No significant change in the mean open time of subconductance states was observed with increasing negative pipette pressure or with varying voltages (ranging from -40 to -100 mV). Using Markov-chain modeling we identified a minimal four-states kinetic scheme, which recapitulates essential characteristics of the single channel data, including that of the subconductance level. This study advances our understanding of Piezo1 gating mechanism in response to discrete stimuli (such as pressure and voltage) and paves the path to develop cellular and tissue level models to predict Piezo1 function in various cell types.

Performance evaluation of cable-stayed bridge expansion joints based on Lasso dimensionality reduction and temperature-displacement-correlation model

Expansion joints play a crucial role in accommodating the longitudinal movement of the main beam, which is mainly caused by temperature variation. This paper establishes an accurate model that relates the temperature field of the main beam to the displacement of the expansion joint, enabling reliable performance prediction and early warning of the expansion joint. Firstly, three commonly used methods for characterizing the temperature field of the main beam are introduced, along with their advantages and disadvantages. Secondly, a novel method is proposed using the Lasso algorithm to calculate critical temperatures. The objective is to select temperature channels data that have significant impact on the longitudinal displacement of the main beam. The selected channels data is then linearly weighted based on feature importance to obtain critical temperature. Based on this, a precise relationship model between the main beam temperature and the expansion joint displacement is derived through regression. For the residual term in the model fitting, an expansion joint performance early warning procedure is developed based on the X-bar control chart. Finally, using one-year long-term monitoring data from a newly constructed cable-stayed bridge as an example, the proposed method demonstrates superior capability in predicting the predefined damage of the expansion joint compared to the other two commonly used methods.

Some thoughts on ultrasound futures

Development of ultrasound technology began in early 1950s and has maintained a fast pace. In this talk I will review some of this history with the goal of setting the stage for future development. I have opted to split this development chronology into four stages by the nature of the electronics with the culmination of software-based systems. This talk will consider near-term futures that are gained from technologies such as software beamformation. An aid in defining this future will be information gained from the programs of various technical conferences. It is assumed that much of the work presented at such meetings has gone through broader review processes such as reviews of grant proposals and manuscript submissions. A hopefully interesting recommendation that arises from this analysis is towards research for improved understanding of sound/tissue interactions based on received echo data (e.g., channel data) and how this understanding may be used to improve image formation and increase our understanding of pathologies. An aspect that may arise from this is the potential of being able to define an upper limit on performance of ultrasound scanners in a broad patient population.

Massive MIMO With Cauchy Noise: Channel Estimation, Achievable Rate and Data Decoding

Massive MIMO With Cauchy Noise: Channel Estimation, Achievable Rate and Data Decoding

Efficient methods for iterative ultrasound image reconstruction using L1 and L2 norm regularization

Ultrasound image reconstruction can be posed as an inverse problem, with image pixels as parameters to a model of wave propagation that are estimated from raw ultrasound channel data. Such framework allows one to make assumptions about channel signals and image properties in form of regularization that can be used to improve reconstruction accuracy in the presence of electronic and acoustic noise. A simple model assumes spherical wave propagation from point sources in a homogeneous medium, similar to delay-and-sum (DAS) beamforming; solving such problems numerically can require many iterations and can result in blurred images when traditional L2 norm regularization is used. We use Fast Iterative Shrinkage Thersholding Algorithm (FISTA) to reduce the number of iterations to less than 10, and to apply L1-norm regularization to the data, which improves edge sharpness and image contrast. We demonstrate the concept using FIELD II simulated ultrasound signals from point, speckle, and anechoic targets with controlled levels of electronic and speckle noise. The FISTA-reconstructed point targets show reduced sidelobe levels by 15 dB compared to the traditional DAS image, and the reduction in full-width at half maximum by a factor of 2. We also implement iterative reconstruction in omega-k frequency domain, which allows factoring the forward and adjoint operators at each spatial frequency and paves the way for an intuitive and more memory efficient, multi-threaded implementation of the method.