CH3 NH3 PbBr3 Research Articles

Lattice-Gradient Perovskite KTaO3 Films for an Ultrastable and Low-Dose X-Ray Detector.

Conventional indirect X-ray detectors employ scintillating phosphors to convert X-ray photons into photodiode-detectable visible photons, leading to low conversion efficiencies, low spatial resolutions, and optical crosstalk. Consequently, X-ray detectors that directly convert photons into electric signals have long been desired for high-performance medical imaging and industrial inspection. Although emerging hybrid inorganic-organic halide perovskites, such as CH3 NH3 PbI3 and CH3 NH3 PbBr3 , exhibit high sensitivity, they have salient drawbacks including structural instability, ion motion, and the use of toxic Pb. Here, this work reports an ultrastable, low-dose X-ray detector comprising KTaO3 perovskite films epitaxially grown on a Nb-doped strontium titanate substrate using a low-cost solution method. The detector exhibits a stable photocurrent under high-dose irradiation, high-temperature (200 °C), and aqueous conditions. Moreover, the prototype KTaO3 -film-based detector exhibits a 150-fold higher sensitivity (3150 µC Gyair -1 cm-2 ) and 150-fold lower detection limit (<40 nGyair s-1 ) than those of commercial α-Se-based direct detectors. Systematic investigations reveal that the high stability of the detector originates from the strong covalent bonds within the KTaO3 film, whereas the low detection limit is due to a lattice-gradient-driven built-in electric field and the high insulating property of KTaO3 film. This study unveils a new path toward the fabrication of green, stable, and low-dose X-ray detectors using oxide perovskite films, which have significant application potential in medical imaging and security operations.

All-Optical Switching Based on Sub-Bandgap Photoactivation of Charge Trapping in Metal Halide Perovskites.

Controllable optical properties are crucial for the application of light-emitting materials in optical devices. In this work, controllable photoluminescence in metal halide perovskite crystals is realized via photoactivation of their defects. It is found that under continuous excitation, the photoluminescence intensity of a CH3 NH3 PbBr3 crystal can be fully controlled by sub-bandgap energy photon illumination. Such optically controllable emission behavior is rather general as it is observed also in CsPbBr3 and other perovskite materials. The switching mechanism is assigned to reversible light-induced activation/deactivation of nonradiative recombination centers, the presence of which relates to an excess of Pb during perovskite synthesis. Given the success of perovskites in photovoltaics and optoelectronics, it is believed that the discovery of green luminescence controlled by red illumination will extend the application scope of perovskites toward optical devices and intelligent control.

Observation of 3D Biexcitons in Pristine-Quality CH3 NH3 PbBr3 Single Crystals.

Halide perovskites (HPs) are fascinating materials whose optoelectronic properties are arguably excitonic. In the HP family, biexcitons are known to exist only in low dimensions where exciton-exciton binding is strongly enhanced by quantum and dielectric confinements. In this paper, however, it is shown that they indeed do exist in 3D bulk CH3 NH3 PbBr3 (MAPbBr3 ) single crystals if the pristine crystal quality is ensured for subtle binding of two excitons. The existence of biexcitons is clearly evidenced below 30 K with a binding energy of ≈3.9 ± 0.3 meV according to i) exciton-biexciton population dynamics, ii) giant resonant two-photon excitation of biexcitons, iii) inverted Boltzmann-type spectral feature, and iv) zero degree of circular polarization in the biexciton photoluminescence. Because of the polariton effect, the two-photon resonance occurs at the excited biexciton state from which longitudinal-transverse splitting is calculated to be 3.7 meV. The discovery of the 3D biexcitons underscores the very quality of HP crystals for generating various many-body excitonic phases in MAPbBr3 and its analogues toward the improved understanding of their fundamental properties and highly efficient optoelectronic applications.

In Situ Vapor-Phase Halide Exchange of Patterned Perovskite Thin Films.

Metal halide perovskites (MHPs) exhibit optoelectronic properties that are dependent on their ionic composition, and the feasible exploitation of these properties for device applications requires the ability to control the ionic composition integrated with the patterning process. Herein, the halide exchange process of MHP thin films directly combined with the patterning process via a vapor transport method is demonstrated. Specifically, the patterned arrays of CH3 NH3 PbBr3 (MAPbBr3 ) are obtained by stepwise conversion from polymer-templated PbI2 thin films to CH3 NH3 PbI3 (MAPbI3 ), followed by halide exchange via precursor switching from CH3 NH3 I to CH3 NH3 Br. It is confirmed that the phase transformation from MAPbI3 patterns to MAPbBr3 shows time- and position-dependences on the substrate during halide exchange following the solid-solution model with Avrami kinetics. The photodetectors fabricated from the completely exchanged MAPbBr3 patterns display exceptional air stability and reversible detectivity from "apparent death" upon removing the adsorbed impurities, thereby suggesting the superior structural stability of perovskite patterns prepared through vapor-phase halide exchange. The results demonstrate the potential of chemical vapor deposition patterning of MHP materials in multicomponent optoelectronic device systems.

Blinking Mechanisms and Intrinsic Quantum-Confined Stark Effect in Single Methylammonium Lead Bromide Perovskite Quantum Dots.

Lead halide perovskite quantum dots (QDs) are promising materials for next-generation photoelectric devices because of their low preparation costs and excellent optoelectronic properties. In this study, the blinking mechanisms and the intrinsic quantum-confined Stark effect (IQCSE) in single organic-inorganic hybrid CH3 NH3 PbBr3 perovskite QDs using single-dot photoluminescence (PL) spectroscopy is investigated. The PL quantum yield-recombination rates distribution map allows the identification of different PL blinking mechanisms and their respective contributions to the PL emission behavior. A strong correlation between the excitation power and the blinking mechanisms is reported. Most single QDs exhibit band-edge carrier blinking under a low excitation photon fluence. While under a high excitation photon fluence, different proportions of Auger-blinking emerge in their PL intensity trajectories. In particular, significant IQCSEs in the QDs that exhibit more pronounced Auger-blinking are observed. Based on these findings, an Auger-induced IQCSE model to explain the observed IQCSE phenomena is observed.

High Efficiency (41.85) of Br Perovskites base solar cells with ZnO and TiO2 comparable study as ETM

Due to its ease of processing, low production costs, superb light-harvesting characteristics, and high efficiency, organic-inorganic perovskite solar cells have attracted great attention in the photovoltaic research community in recent years, making it more preferable than other existing solar cell materials. Lead-based perovskites (CH3NH3PbX3, X=Cl, I, Br) solar cells have recently achieved high efficiency of ~19.3 percent, well exceeding most thin-film and organic solar cells’ efficiencies despite its potential for photovoltaic applications, organometal halide perovskites have attracted considerable attention recently and are also considered as promising materials in light-emitting devices. In particular, photovoltaic devices with efficiencies above 20 percent have been prepared using organometal halide perovskites as absorbent materials in the last few years A planar. The standard design for a planar hetero-junction perovskite-based solar cell is: Back electrode/Hole Transport Material (HTM)/Perovskite absorber / Electron Transport Material (ETM) / Transparent electrode. The hole mobility and acceptor concentration of the HTM, interface trap density, and work-function of back contact metal have shown a significant influence on the device performance. Also with these good merits.In this research, two types of ETM (TiO2and ZnO) were used with the Perovskite CH3NH3PbBr3and was found that the use of TiO2 with perovskite achieved high efficiency of 41.85% while the use of ZnO with perovskites we obtained an efficiency 17.67%. Method/Analysis: Solar cell architecture assessment is conducted using Solar Cell Power Simulator(SCAPS). This is a computer-based software tool and is well equipped to research photovoltaic structures with barriers to homo and heterojunctions, multi-junctions, and Schottky. This model optimizes various parameters such as thickness, absorber layer density, Electron Transport Material (ETM),Density of accepter and donor (ND and NA), and Hole Transport Material (HTM) doping concentrations. Achievement and simulates electrons and holes based on the Poisson’s and continuity equation The effected thickness of CH3 NH3 PbBr3 different from 0.05μm to 1.2μm and the finest results are observed at 0.05 μm.

General Decomposition Pathway of Organic-Inorganic Hybrid Perovskites through an Intermediate Superstructure and its Suppression Mechanism.

Organic-inorganic hybrid perovskites (OIHPs) have generated considerable excitement due to their promising photovoltaic performance. However, the commercialization of perovskite solar cells (PSCs) is still plagued by the structural degradation of the OIHPs. Here, the decomposition mechanism of OIHPs under electron beam irradiation is investigated via transmission electron microscopy, and a general decomposition pathway for both tetragonal CH3 NH3 PbI3 and cubic CH3 NH3 PbBr3 is uncovered through an intermediate superstructure state of CH3 NH3 PbX2.5 , X = I, Br, with ordered vacancies into final lead halides. Such decomposition can be suppressed via carbon coating by stabilization of the perovskite structure framework. These findings reveal the general degradation pathway of OIHPs and suggest an effective strategy to suppress it, and the atomistic insight learnt may be useful for improving the stability of PSCs.

An Electrically Modulated Single-Color/Dual-Color Imaging Photodetector.

An electrically modulated single-/dual-color imaging photodetector with fast response speed is developed based on a small molecule (COi 8DFIC)/perovskite (CH3 NH3 PbBr3 ) hybrid film. Owing to the type-I heterojunction, the device can facilely transform dual-color images to single-color images by applying a small bias voltage. The photodetector exhibits two distinct cut-off wavelengths at ≈544 nm (visible region) and ≈920 nm (near-infrared region), respectively, without any power supply. Its two peak responsivities are 0.16 A W-1 at ≈525 nm and 0.041 A W-1 at ≈860 nm with a fast response speed (≈102 ns). Under 0.6 V bias, the photodetector can operate in a single-color mode with a peak responsivity of 0.09 A W-1 at ≈475 nm, showing a fast response speed (≈102 ns). A physical model based on band energy theory is developed to illustrate the origin of the tunable single-/dual-color photodetection. This work will stimulate new approaches for developing solution-processed multifunctional photodetectors for imaging photodetection in complex circumstances.

Semiconductor Quantum Dots: An Emerging Candidate for CO2 Photoreduction.

As one of the most critical approaches to resolve the energy crisis and environmental concerns, carbon dioxide (CO2 ) photoreduction into value-added chemicals and solar fuels (for example, CO, HCOOH, CH3 OH, CH4 ) has attracted more and more attention. In nature, photosynthetic organisms effectively convert CO2 and H2 O to carbohydrates and oxygen (O2 ) using sunlight, which has inspired the development of low-cost, stable, and effective artificial photocatalysts for CO2 photoreduction. Due to their low cost, facile synthesis, excellent light harvesting, multiple exciton generation, feasible charge-carrier regulation, and abundant surface sites, semiconductor quantum dots (QDs) have recently been identified as one of the most promising materials for establishing highly efficient artificial photosystems. Recent advances in CO2 photoreduction using semiconductor QDs are highlighted. First, the unique photophysical and structural properties of semiconductor QDs, which enable their versatile applications in solar energy conversion, are analyzed. Recent applications of QDs in photocatalytic CO2 reduction are then introduced in three categories: binary II-VI semiconductor QDs (e.g., CdSe, CdS, and ZnSe), ternary I-III-VI semiconductor QDs (e.g., CuInS2 and CuAlS2 ), and perovskite-type QDs (e.g., CsPbBr3 , CH3 NH3 PbBr3 , and Cs2 AgBiBr6 ). Finally, the challenges and prospects in solar CO2 reduction with QDs in the future are discussed.

Elucidation of Photoluminescence Blinking Mechanism and Multiexciton Dynamics in Hybrid Organic-Inorganic Perovskite Quantum Dots.

Halide perovskites (ABX3 ) have emerged as promising materials in the past decade owing to their superior photophysical properties, rendering them potential candidates as solar cells, light-emitting diode displays, and lasing materials. To optimize their utilization into optoelectronic devices, fundamental understanding of the optical behaviors is necessary. To reveal the comprehensive structure-property relationship, CH3 NH3 PbBr3 (MAPbBr3 ) perovskite quantum dots (PQDs) of three different sizes are prepared by controlling the precipitation temperature. Photoluminescence (PL) blinking, a key process that governs the emission efficiency of the PQD materials, is investigated in detail by the time-resolved spectroscopic measurements of individual dots. The nature of the generated species in the course of blinking events is identified, and the mechanism governing the PL blinking is studied as a function of PQD sizes. Further, the practical applicability of MAPbBr3 PQDs is assessed by studying the multiexciton dynamics under high photoexcitation intensity under which most of the display devices work. Ultrafast transient absorption spectroscopy helped in uncovering the volume-dependent Auger recombination rates, which are further explored by comparing the early-time transitions related to surface trap states and higher band states.

Understanding the Impact of Bismuth Heterovalent Doping on the Structural and Photophysical Properties of CH3 NH3 PbBr3 Halide Perovskite Crystals with Near-IR Photoluminescence.

A comprehensive study unveiling the impact of heterovalent doping with Bi3+ on the structural, semiconductive, and photoluminescent properties of a single crystal of lead halide perovskites (CH3 NH3 PbBr3 ) is presented. As indicated by single-crystal XRD, a perfect cubic structure in Bi3+ -doped CH3 NH3 PbBr3 crystals is maintained in association with a slight lattice contraction. Time-resolved and power-dependent photoluminescence (PL) spectroscopy illustrates a progressively quenched PL of visible emission, alongside the appearance of a new PL signal in the near-infrared (NIR) regime, which is likely to be due to energy transfer to the Bi sites. These optical characteristics indicate the role of Bi3+ dopants as nonradiative recombination centers, which explains the observed transition from bimolecular recombination in pristine CH3 NH3 PbBr3 to a dominant trap-assisted monomolecular recombination with Bi3+ doping. Electrically, it is found that the mobility in pristine perovskite crystals can be boosted with a low Bi3+ concentration, which may be related to a trap-filling mechanism. Aided by temperature (T)-dependent measurements, two temperature regimes are observed in association with different activation energies (Ea ) for electrical conductivity. The reduction of Ea at lower T may be ascribed to suppression of ionic conduction induced by doping. The modified electrical properties and NIR emission with the control of Bi3+ concentration shed light on the opportunity to apply heterovalent doping of perovskite single crystals for NIR optoelectronic applications.

Synergistic Surface Passivation of CH3 NH3 PbBr3 Perovskite Quantum Dots with Phosphonic Acid and (3-Aminopropyl)triethoxysilane.

CH3 NH3 PbBr3 perovskite quantum dots (PQDs) are synthesized by using four different linear alkyl phosphonic acids (PAs) in conjunction with (3-aminopropyl)triethoxysilane (APTES) as capping ligands. The resultant PQDs are characterized by means of XRD, TEM, Raman spectroscopy, FTIR spectroscopy, UV/Vis, photoluminescence (PL), time-resolved PL, and X-ray photoelectron spectroscopy (XPS). PA chain length is shown to control the PQD size (ca. 2.9-4.2 nm) and excitonic absorption band positions (λ=488-525 nm), with shorter chain lengths corresponding to smaller sizes and bluer absorptions. All samples show a high PL quantum yield (ca. 46-83 %) and high PL stability; this is indicative of a low density of band gap trap states and effective surface passivation. Stability is higher for smaller PQDs; this is attributed to better passivation due to better solubility and less steric hindrance of the shorter PA ligands. Based on the FTIR, Raman, and XPS results, it is proposed that Pb2+ and CH3 NH3 + surface defects are passivated by R-PO3 2- or R-PO2 (OH)- , whereas Br- surface defects are passivated by R-NH3 + moieties. This study establishes the combination of PA and APTES ligands as a highly effective dual passivation system for the synergistic passivation of multiple surface defects of PQDs through primarily ionic bonding.

Superficial-Layer-Enhanced Raman Scattering (SLERS) for Depth Detection of Noncontact Molecules.

Although the strength of Raman signals can be increased by many orders of magnitude on noble metal nanoparticles, this enhancement is confined to an extremely short distance from the Raman-active surface. The key to the development of Raman spectroscopy for applications in diagnosis and detection of cancer and inflammatory diseases, and in pharmacology, relies on the capability of detecting analytes that are noninteractive with Raman-active surfaces. Here, a new Raman enhancement system is constructed, superficial-layer-enhanced Raman scattering (SLERS), by covering elongated tetrahexahedral gold nanoparticle arrays with a superficial perovskite (CH3 NH3 PbBr3 ) film. Plasmonic decay is depressed along the vertical direction away from the noble metal surface and the penetration depth is increased in the perovskite media. The vertical penetration of SLERS is verified by the spatial distribution of the analytes via Raman imaging in layer-scanning mode.

A 1300 mm2 Ultrahigh-Performance Digital Imaging Assembly using High-Quality Perovskite Single Crystals.

By fine-tuning the crystal nucleation and growth process, a low-temperature-gradient crystallization method is developed to fabricate high-quality perovskite CH3 NH3 PbBr3 single crystals with high carrier mobility of 81 ± 5 cm2 V-1 s-1 (>3 times larger than their thin film counterpart), long carrier lifetime of 899 ± 127 ns (>5 times larger than their thin film counterpart), and ultralow trap state density of 6.2 ± 2.7 × 109 cm-3 (even four orders of magnitude lower than that of single-crystalline silicon wafers). In fact, they are better than perovskite single crystals reported in prior work: their application in photosensors gives superior detectivity as high as 6 × 1013 Jones, ≈10-100 times better than commercial sensors made of silicon and InGaAs. Meanwhile, the response speed is as fast as 40 µs, ≈3 orders of magnitude faster than their thin film devices. A large-area (≈1300 mm2 ) imaging assembly composed of a 729-pixel sensor array is further designed and constructed, showing excellent imaging capability thanks to its superior quality and uniformity. This opens a new possibility to use the high-quality perovskite single-crystal-based devices for more advanced imaging sensors.

Distinguishable Detection of Ultraviolet, Visible, and Infrared Spectrum with High-Responsivity Perovskite-Based Flexible Photosensors.

Distinguishable detection of the ultraviolet, visible, and infrared spectrum is promising and significant for the super visual system of artificial intelligences. However, it is challenging to provide a photosensor with such broad spectral response ability. In this work, the ultraviolet, visible, and infrared spectrum is distinguished by developing serial photosensors based on perovskite/carbon nanotube hybrids. Oraganolead halide perovskites (CH3 NH3 PbX3 ) possess remarkable optoelectronic properties and tunable optical band gaps by changing the halogens, and integration with single-walled carbon nanotubes can further improve their photoresponsivities. The CH3 NH3 PbCl3 -based photosensor shows a responsivity up to 105 A W-1 to ultraviolet and no obvious response to visible light, which is superior to that of most ultraviolet sensors. The CH3 NH3 PbBr3 -based photosensor exhibits a high responsivity to visible light. Serial devices of the two hybrid photosensors with comparable electric and sensory performances can distinguish the spectrum of ultraviolet, visible, and infrared even with varying light intensities. The photosensors also demonstrate excellent mechanical flexibility and bending stability. By taking full advantages of the oraganolead halide perovskites, this work provides flexible high-responsivity photosensors specialized for ultraviolet, and gives a simple strategy for distinguishable detection of ultraviolet, visible, and infrared spectrum based on the serial flexible photosensors.

Controlled Homoepitaxial Growth of Hybrid Perovskites.

Organic-inorganic hybrid perovskites have demonstrated tremendous potential for the next-generation electronic and optoelectronic devices due to their remarkable carrier dynamics. Current studies are focusing on polycrystals, since controlled growth of device compatible single crystals is extremely challenging. Here, the first chemical epitaxial growth of single crystal CH3 NH3 PbBr3 with controlled locations, morphologies, and orientations, using combined strategies of advanced microfabrication, homoepitaxy, and low temperature solution method is reported. The growth is found to follow a layer-by-layer model. A light emitting diode array, with each CH3 NH3 PbBr3 crystal as a single pixel, with enhanced quantum efficiencies than its polycrystalline counterparts is demonstrated.

Grain Size Modulation and Interfacial Engineering of CH3 NH3 PbBr3 Emitter Films through Incorporation of Tetraethylammonium Bromide.

Metal halide perovskites have demonstrated breakthrough performances as absorber and emitter materials for photovoltaic and display applications respectively. However, despite the low manufacturing cost associated with solution-based processing, the propensity for defect formation with this technique has led to an increasing need for defect passivation. Here, we present an inexpensive and facile method to remedy surface defects through a postdeposition treatment process using branched alkylammonium cation species. The simultaneous realignment of interfacial energy levels upon incorporation of tetraethylammonium bromide onto the surface of CH3 NH3 PbBr3 films contributes favorably toward the enhancement in overall light-emitting diode characteristics, achieving maximum luminance, current efficiency, and external quantum efficiency values of 11 000 cd m-2 , 0.68 cd A-1 , and 0.16 %, respectively.

Fast Postmoisture Treatment of Luminescent Perovskite Films for Efficient Light-Emitting Diodes.

Despite the recent advances in the performance of perovskite light-emitting diodes (PeLEDs), the effects of water on the perovskite emissive layer and its electroluminescence are still unclear, even though it has been previously demonstrated that moisture has a significant impact on the quality of perovskite films in the fabrication process of perovskite solar cells and is a prerequisite for obtaining high-performance PeLEDs. Here, the effects of postmoisture on the luminescent CH3 NH3 PbBr3 (MAPbBr3 ) perovskite films are systematically investigated. It is found that postmoisture treatment can efficiently control the morphology and growth of perovskite films and only a fast moisture exposure at a 60% high relative humidity results in significantly improved crystallinity, carrier lifetime, and photoluminescence quantum yield of perovskite films. With the optimized moisture-treated perovskite films, a high-performance PeLED is fabricated, exhibiting a maximum current efficiency of 20.4 cd A-1 , which is an almost 20-fold enhancement when compared with perovskite films without moisture treatment. The results provide valuable insights into the moisture-assisted growth of luminescent perovskite films and will aid in the development of high-performance perovskite light-emitting devices.

Fabry-Pérot Oscillation and Room Temperature Lasing in Perovskite Cube-Corner Pyramid Cavities.

Recently, organometal halide perovskite-based optoelectronics, particularly lasers, have attracted intensive attentions because of its outstanding spectral coherence, low threshold, and wideband tunability. In this work, high-quality CH3 NH3 PbBr3 single crystals with a unique shape of cube-corner pyramids are synthesized on mica substrates using chemical vapor deposition method. These micropyramids naturally form cube-corner cavities, which are eminent candidates for small-sized resonators and retroreflectors. The as-grown perovskites show strong emission ≈530 nm in the vertical direction at room temperature. A special Fabry-Pérot (F-P) mode is employed to interpret the light confinement in the cavity. Lasing from the perovskite pyramids is observed from 80 to 200 K, with threshold ranging from ≈92 µJ cm-2 to 2.2 mJ cm-2 , yielding a characteristic temperature of T0 = 35 K. By coating a thin layer of Ag film, the threshold is reduced from ≈92 to 26 µJ cm-2 , which is accompanied by room temperature lasing with a threshold of ≈75 µJ cm-2 . This work advocates the prospect of shape-engineered perovskite crystals toward developing micro-sized optoelectronic devices and potentially investigating light-matter coupling in quantum optics.

Tailored Engineering of an Unusual (C4 H9 NH3 )2 (CH3 NH3 )2 Pb3 Br10 Two-Dimensional Multilayered Perovskite Ferroelectric for a High-Performance Photodetector.

Two-dimensional (2D) layered hybrid perovskites have shown great potential in optoelectronics, owing to their unique physical attributes. However, 2D hybrid perovskite ferroelectrics remain rare. The first hybrid ferroelectric with unusual 2D multilayered perovskite framework, (C4 H9 NH3 )2 (CH3 NH3 )2 Pb3 Br10 (1), has been constructed by tailored alloying of the mixed organic cations into 3D prototype of CH3 NH3 PbBr3 . Ferroelectricity is created through molecular reorientation and synergic ordering of organic moieties, which are unprecedented for the known 2D multilayered hybrid perovskites. Single-crystal photodetectors of 1 exhibit fascinating performances, including extremely low dark currents (ca. 10-12 A), large on/off current ratios (ca. 2.5×103 ), and very fast response rate (ca. 150 μs). These merits are superior to integrated detectors of other 2D perovskites, and compete with the most active CH3 NH3 PbI3 .