Cerium Oxide Nanoparticles Research Articles

Green mediated synthesis of cerium oxide nanoparticles by using Oroxylum indicum for evaluation of catalytic and biomedical activity.

The present perspective emphasizes the green synthesis of CeO2-NPs using Oroxylum indicum fruit extract. The synthesized NPs were characterized utilizing analytical techniques, including FT-IR, UV-vis, XRD, SEM-EDX, and VSM. Of them, XRD analysis ratifies the cubic fluorite crystal structure along with a particle size of 23.58 nm. EDX results support the presence of cerium and oxygen in a proper ratio. The surface morphology of NPs, however, was scrutinized using SEM. The lower IC50 value (20.8 μg mL-1) of NPs compared to the reference substance, ascorbic acid (33.2 μg mL-1), demonstrates CeO2-NPs to be a compatible antioxidant. Moreover, the drug-releasing capability of CeO2-NPs was a buffer pH-dependent parameter. The acidic pH solution was 20.5%, while the basic pH solution was 16.9%. The drug-releasing capability was analyzed using the Higuchi model and Korsmeyer-Peppas kinetics. The values of the determination coefficient (R 2) were found to be 0.9944 and 0.9834, respectively. The photocatalytic activity of CeO2-NPs was evaluated, considering methylene blue as a model dye. The degradation percentage was attained up to 56.77% after it had been exposed for 150 min. Apart from this, the synthesized NPs were screened against two fungus species, Bipolaris sorokiniana and Fusarium. The percentage of growth was measured at 56% and 49%, respectively.

Gelatin/Dopamine/Zinc-Doped Ceria/Curcumin nanocomposite hydrogels for repair of chronic refractory wounds

Chronic wound healing is a common clinical challenge, characterized by bacterial infection, protracted inflammatory response, oxidative stress, and insufficient neovascularization. Nanozymes have emerged as a promising solution for treating skin wounds due to their antioxidant, antibacterial, and angiogenic properties. In recent years, combining nanozymes with hydrogels to jointly promote wound healing has attracted increasing research interest. However, most of the current nanocomposite hydrogels are still not effective in simultaneously controlling inflammatory, oxidative stress and bacterial invasion in wound healing. Improving the therapeutic functional diversity and efficacy of nanocomposite hydrogels remains a problem that needs to be addressed. In this study, we prepared nanocomposite hydrogels (GelMD-Cur@ZHMCe) by combining methylacrylated gelatin modified with dopamine (GelMD) with Zinc-doped hollow mesoporous cerium oxide nanoparticles loaded with curcumin (Cur@ZHMCe). The resulting hydrogels exhibited excellent water absorption, adhesion, and biocompatibility. In vitro and in vivo studies have demonstrated that GelMD-Cur@ZHMCe has excellent antioxidant, antibacterial, anti-inflammatory and vasculature-promoting properties, which enable it to rapidly promote wound repair. The wound healing rate of the rat total skin defect infection model treated with GelMD-Cur@ZHMCe reached 98.5±4.9 % after 14 days of treatment. It was demonstrated that this multifunctional nanocomposite hydrogel provides a promising therapeutic strategy for skin repair.

Efficient adsorption and desorption of elemental mercury by ordered mesoporous cerium oxide nanoparticles derived from Ce-based metal–organic frameworks

Metal oxide-based adsorbents not only exhibit effective elemental mercury (Hg0) removal capacity but also offer suitability for wet desorption, which is a green treatment method to avoid secondary contamination of deactivated adsorbents. Nevertheless, the limited dispersing capacity of the carrier restricts the loading of active substances, hindering further enhancement of adsorption capacity. The pore structure of adsorbent is also a key factor for wet desorption. In this work, we synthesized a hollow cerium-based metal–organic framework (Ce-mesoMOF) as a sacrificial precursor to obtain ordered mesoporous cerium oxide (OM-CeO₂) via a mesoporous genetic pyrolysis-oxidation mechanism. OM-CeO2 inherits the excellent structural properties of mesoporous MOF with better catalytic activity, exhibiting strong adsorption capacity in various atmospheres (97.6 % in pure N2, 98.8 % in N2 + H2S). Wet desorption of Hg compounds and reduction of the active site can be synergized in Na2S2O3 solution. The octahedral structure with an ordered mesoporous shell greatly facilitates the mass transfer process, as evidenced by the strong adsorption capacity and fast kinetic parameters of OM-CeO2. Density functional theory analysis reveals that the conversion reaction of adsorbed Hg has a low energy barrier on the pyrolytic-oxidized OM-CeO2 and the inhibitory effect of reactive S for Hg0 adsorption transforms into a facilitating effect. This study leverages the structural advantages of ordered mesoporous MOFs in the field of Hg adsorption and imparts reactivity through modification for efficient adsorption–desorption.

Innovative sono-synthesis of cerium dioxide nanomaterials using mentha extract with efficient activity for cancer therapy application

Nanostructured CeO2 was fabricated through a facile sonochemical route utilizing cerium (III) nitrate hexahydrate as a metal source and mentha extract as a novel capping agent. To our knowledge, this experimental work is the first successful endeavor for fabricating nanostructured CeO2 employing mentha extract by an easy and eco-friendly route. The microstructure and various characteristics of the oxide nanostructure prepared utilizing mentha extract were investigated using various methods. This research examined the anticancer effects of green synthesized cerium oxide nanoparticles (CeO2-NPs) on cancer cell lines (T98 and SHSY5Y) at several concentrations of 0.0, 0.05, 0.1, 0.2, 0.4, and 0.8 mg/ml NPs by exposure time of 24/48 h. The obtained results presented a cytotoxicity of the prepared NPs against the cancerous cell lines. Considering the CeO2-NP's effects on cancer cells indicated significant toxicity against cancer cell lines, these nanoparticles could be applied in medicine and in developing new drug formulations for cancer cell lines. Additional investigations are desired to reveal other biological applications of synthesized NPs against normal and other cancerous cell lines.

Development of Cerium Oxide-Laden GelMA/PCL Scaffolds for Periodontal Tissue Engineering.

This study investigated gelatin methacryloyl (GelMA) and polycaprolactone (PCL) blend scaffolds incorporating cerium oxide (CeO) nanoparticles at concentrations of 0%, 5%, and 10% w/w via electrospinning for periodontal tissue engineering. The impact of photocrosslinking on these scaffolds was evaluated by comparing crosslinked (C) and non-crosslinked (NC) versions. Methods included Fourier transform infrared spectroscopy (FTIR) for chemical analysis, scanning electron microscopy (SEM) for fiber morphology/diameters, and assessments of swelling capacity, degradation profile, and biomechanical properties. Biological evaluations with alveolar bone-derived mesenchymal stem cells (aBMSCs) and human gingival fibroblasts (HGFs) encompassed tests for cell viability, mineralized nodule deposition (MND), and collagen production (CP). Statistical analysis was performed using Kruskal-Wallis or ANOVA/post-hoc tests (α = 5%). Results indicate that C scaffolds had larger fiber diameters (~250 nm) compared with NC scaffolds (~150 nm). NC scaffolds exhibited higher swelling capacities than C scaffolds, while both types demonstrated significant mass loss (~50%) after 60 days (p < 0.05). C scaffolds containing CeO showed increased Young's modulus and tensile strength than NC scaffolds. Cells cultured on C scaffolds with 10% CeO exhibited significantly higher metabolic activity (>400%, p < 0.05) after 7 days among all groups. Furthermore, CeO-containing scaffolds promoted enhanced MND by aBMSCs (>120%, p < 0.05) and increased CP in 5% CeO scaffolds for both variants (>180%, p < 0.05). These findings underscore the promising biomechanical properties, biodegradability, cytocompatibility, and enhanced tissue regenerative potential of CeO-loaded GelMA/PCL scaffolds for periodontal applications.

Biogenic synthesis of CeO2 nanoparticles via moringa oleifera seed extract: Photocatalytic and biological activity for textile dye degradation

This article presents a study on synthesizing cerium oxide nanoparticles utilizing cerium nitrate and Moringa oleifera seed extract as stabilizing and reducing agents. The XRD pattern of cerium oxide was a cubic structure with an average crystalline size of 11.92 nm. The surface feature of ceria nanoparticles has a foam-like nanostructure, type IV isotherms-mesoporous, with a 56.845 m2/g specific surface area. The UV–Vis absorbance and Tauc plot showed that the direct and indirect energy bandgap was 2.51 and 2.79 eV, respectively. TGA/DTA has established structural phase stability with corresponding mass changes by influencing bioactive molecules of seed extract in cerium nanoparticles. These nanoparticles exhibited effective antibacterial properties against S. aureus and E. coli pathogens, and the turbidimetry antioxidant properties were evaluated. Dye degradation through the photocatalyst was investigated, with the optimum degradation efficiency of 99.71 and 99.83 %, pseudo-first-order kinetics 4.62 × 10−2 and 5.07 × 10−2, respectively, for anionic-Congo red and cationic-Malachite green dye. The observed results concluded that green-mediated nanostructured ceria particles might effectively be used for antibacterial and photocatalytic purposes.

The effect of intra spinal administration of cerium oxide nanoparticles on central pain mechanism: An experimental study.

This study investigated Cerium oxide nanoparticles (CeONPs) effect on central neuropathic pain (CNP). The compressive method of spinal cord injury (SCI) model was used for pain induction. Three groups were formed by a random allocation of 24 rats. In the treatment group, CeONPs were injected above and below the lesion site immediately after inducing SCI. pain symptoms were evaluated using acetone, Radian Heat, and Von Frey tests weekly for six weeks. Finally, we counted fibroblasts using H&E staining. We evaluated the expression of Cx43, GAD65 and HDAC2 proteins using the western blot method. The analysis of results was done by PRISM software. At the end of the study, we found that CeONPs reduced pain symptoms to levels similar to those observed in normal animals. CeONPs also increased the expression of GAD65 and Cx43 proteins but did not affect HDAC2 inhibition. CeONPs probably have a pain-relieving effect on chronic pain by potentially preserving GAD65 and Cx43 protein expression and hindering fibroblast infiltration.

Promotion of CO2 Electroreduction on Bismuth Nanosheets with Cerium Oxide nanoparticles.

Formic acid (HCOOH) is a highly energy efficient product of the electrochemical CO2 reduction reaction (CO2RR). Bismuth-based catalysts have shown promise in the conversion of CO2 to formic acid, but there is still a great need for further improvement in selectivity and activity. Herein, we report the preparation of Bi nanosheets decorated by cerium oxide nanoparticles (CeOx) with high Ce3+/Ce4+ ratio and rich oxygen vacancies. The CeOx nanoparticles affect the electronic structures of bismuth, enhance CO2 adsorption, and thus promote the CO2RR properties of Bi nanosheets. Compared with elemental Bi nanosheets, the hetero-structured CeOx/Bi nanosheets exhibit much higher activity over a wide potential window, showing a current density of 16.1 mA cm-2 with a Faradaic efficiency of 91.1% at -0.9 V vs. reversible hydrogen electrode.

Mixing Order Asymmetry in Nanoparticle-Polymer Complexation and Precipitation Revealed by Isothermal Titration Calorimetry.

In recent years, there has been a renewed interest in complex coacervation, driven by concerted efforts to offer novel experimental and theoretical insights into electrostatic charge-induced association. While previous studies have primarily focused on polyelectrolytes, proteins, or surfactants, our work explores the potential of using cerium (CeO2) and iron (γ-Fe2O3) oxide nanoparticles (NPs) to develop innovative nanomaterials. By combining various charged species, such as polyelectrolytes, charged neutral block copolymers, and coated NPs, we study a wide variety of complexation patterns and compare them using isothermal titration calorimetry, light scattering, and microscopy. These techniques confirm that the titration of oppositely charged species occurs in two steps: the formation of polyelectrolyte complexes and subsequent phase (or microphase) separation, depending on the system studied. Across all examined cases, the entropic contribution to the total free energy surpasses the enthalpic contribution, in agreement with counterion release mechanisms. Furthermore, our investigation reveals a consistent asymmetry in the reaction enthalpy associated with the secondary process, with exothermic profiles observed upon the addition of cationic species to anionic ones and endothermic profiles in the reverse case.

Antibacterial properties of mesoporous silica coated with cerium oxide nanoparticles in dental resin composite

Cerium oxide nanoparticles are known for their antibacterial effects resulting from Ce3+ to Ce4+ conversion. Application of such cerium oxide nanoparticles in dentistry has been previously considered but limited due to deterioration of mechanical properties. Hence, this study aimed to examine mesoporous silica (MCM-41) coated with cerium oxide nanoparticles and evaluate the antibacterial effects and mechanical properties when applied to dental composite resin. Cerium oxide nanoparticles were coated on the MCM-41 surface using the sol–gel method by adding cerium oxide nanoparticle precursor to the MCM-41 dispersion. The samples were tested for antibacterial activity against Streptococcus mutans via CFU and MTT assays. The mechanical properties were assessed by flexural strength and depth of cure according to ISO 4049. Data were analyzed using a t-test, one-way ANOVA, and Tukey’s post-hoc test (p = 0.05). The experimental group showed significantly increased antibacterial properties compared to the control groups (p < 0.005). The flexural strength exhibited a decreasing trend as the amount of cerium oxide nanoparticle-coated MCM-41 increased. However, the flexural strength and depth of cure values of the silane group met the ISO 4049 standard. Antibacterial properties increased with increasing amounts of cerium oxide nanoparticles. Although the mechanical properties decreased, silane treatment overcame this drawback. Hence, the cerium oxide nanoparticles coated on MCM-41 may be used for dental resin composite.

Mitigating Pb-induced oxidative stress in rice plants by cerium oxide and iron oxide nanoparticles

Nanotechnology offers creative and effective solutions for addressing various environmental issues, such as heavy metals (HM). The rapidly increasing HM concentrations in agricultural land have drawn considerable attention. Nanoparticles (NPs) have special physiochemical features that help reduce stress. This study assessed the viability of applying CeO2NPs and FeONPs to rice plants at a concentration of 25 mg/L to effectively remove the detrimental effects of lead (Pb) by using various concentrations (100 and 200 ppm) on plant development and growth. To achieve the desired concentrations, a Pb solution was prepared by dissolving lead nitrate in distilled water and added to the soil. Interestingly, the application of CeO2NPs and FeONPs resulted in a notable increase in plant growth, biomass, gas exchange characteristics, antioxidant enzymatic activity (SOD, POD, APX, and CAT), their gene expressions, as well as other antioxidants (phenols, prolines, amino acids, flavonoids, anthocyanins, and ascorbic acids) while simultaneously reducing oxidative stress (MDA, H2O2, and electrolyte leakage) and Pb uptake in rice. Conversely, Pb elevation in the soil increased oxidative damage and organic acid exudation pattern in the rice. At 200 ppm, a significant rise in Pb content (416.67 % and 380 %) was found in the roots and leaves of rice plants. According to our findings, rice growth can be bio-stimulated by CeO2NPs and FeONPs. Subsequent investigations should focus on the persistent ecological consequences and molecular mechanisms associated with the application of cerium oxide and iron oxide nanoparticles in agriculture to reduce Pb-induced oxidative stress.

Green synthesis of cerium oxide nanoparticles using Quercus infectoria: Characterization and evaluation of antibacterial and antioxidant activities

Cerium oxide nanoparticles (CNP) have gained attention for their unique physical, chemical, and biological properties. This study aims to synthesize CNPs using Quercus infectoria gall extract, and its active components mainly tannic acid (TA), and gallic acid (GA), and compare them with chemically synthesized CNPs. Green synthesis involved adding gall extract, TA, or GA solution to cerium nitrate hexahydrate, followed by reaction at 70 °C and calcination at 500 °C. Characterization employed various methods, including dynamic light scattering, scanning electron microscopy, X-ray diffraction, UV–Vis spectroscopy, and Fourier-transform infrared spectroscopy to respectively characterize hydrodynamic diameter, morphology, crystallinity and purity, and surface functional groups. Antibacterial and antioxidant properties were evaluated using the broth microdilution and DPPH radical scavenging methods, respectively.It confirmed successful synthesis of crystalline CNPs, with UV spectra exhibiting a peak at 290 nm. Antibacterial tests revealed that pre-calcined TA-synthesized NPs, at 25 mg ml−1, exhibited inhibitory properties against Staphylococcus aureus and Pseudomonas aeruginosa. CNPs synthesized with gall extract at 100 mg ml−1displayed antibacterial activities against Escherichia coli and S. aureus, while gall extract had highest efficacy on S. aureus with MIC of 1.875 mg ml−1. GA, TA, and gall extract demonstrated DPPH scavenging activities of 86 %, 59 %, and 66 % at 50 µg/ml, respectively. Antioxidant potential of CNPs at 1 mg ml−1was 19 %, 20 %, 21 %, and 17 % for GA, TA, gall extract, and chemically synthesized CNPs, respectively.In conclusion, CNPs synthesized in this study can be considered as antioxidants. Further investigation is needed to optimize synthesis methods and achieve desired antibacterial properties, given contradictory findings in prior studies.

Synergistic approaches to NOx reduction: Fuel innovations and engine modifications in biomass waste-fueled CI engines

Achieving low nitric oxide emissions in biomass fuel combustion remains a challenge. This study aims at enhancement of NOx reduction by employing a sequence of strategies to arrive at the optimal combination of techniques. This work explores the role of nano particle emulsion, change in profile of combustion chamber geometry, exhaust gas recirculation rates and contribution of selective catalytic reduction (SCR) in the combustion and emission phenomena of CI engine. Cerium oxide and zinc oxide nanoparticles are added in emulsion form at 50 ppm and 100 ppm dosage to grapeseed oil biodiesel. Furthermore, combustion chamber geometry is modified to shallow depth and toroidal shape and tested with ZnO 100 nano blend of grapeseed oil biodiesel (GSBD). EGR at 5 %, 10 %, 15 % and 20 % rates are included in the toroidal shape after concluding that profile as the best performing geometry. A customized model of SCR is implemented to the above combination of ZnO fuel blend, toroidal combustion chamber geometry and 5 % EGR to further reduce NOx emission. SCR device is fabricated with suitable flow and injection parameters with dual type mixers to enhance its NOx conversion efficiency. Overall, this research work gives useful insights for development of NOx reduction strategies in biomass fuel combustion in CI engines. A comprehensive reduction of NOx from 9.3 g/kWh to 2.05 g/kWh is noticed at the end of cumulative set of experiments.

Cerium Oxide Nanoparticles Synthesis using Alhagi Maurorum Leaf Extract and Evaluation of Their Cytotoxic Effect on Breast Cancer Cell Lines and Antibacterial Effects.

Green synthesis offers a fast, simple, and economical method for producing metallic nanoparticles.The basis of this method is to obtain nanoparticles using natural materials, such as plants, fungi, and bacteria, instead of harmful and expensive chemical-reducing agents. In this study, CeO2NPs were produced using Alhagi maurorum extract, and their anticancer and antibacterial activities were evaluated. Alhagi maurorum extract was prepared according to a previously described protocol, and CeO2NPs were synthesized from the salt of this extract. The resulting nanoparticles were characterized using Transmission electron microscopy (TEM), scanning electron microscope (SEM), and X-ray diffraction (XRD) techniques. The antibacterial and cytotoxic effects of the nanoparticles were measured by MIC, MBC, and MTT assays, respectively. The results were analyzed using one-way analysis of variance (ANOVA) using Prism software. The MTT assay on breast cancer cell lines showed that the cytotoxic effect of CeO2NPs on cell lines was concentration-dependent. In addition, this nanoparticle was more effective against Gram-positive bacteria. These nanoparticles can be used as cancer drug delivery systems with specific targeting at low concentrations in addition to anticancer treatments. It can also have biological and medicinal applications, such as natural food preservation and wound dressing.

Nano-catalytic behavior of CeO2 nanoparticles in dye adsorption: Synthesis through bio-combustion and assessment of UV-light-driven photo-adsorption of indigo carmine dye

This study explores the adsorption of indigo carmine dye using bio-combusted cerium oxide nanoparticles (CeO2 NPs). CeO2 NPs were synthesized using a bio-combustion method, and then subjected to structural, morphological, and optical characterization for thorough investigation. Structural investigation was carried out using X-ray diffraction (XRD), which revealed a cubic structure with evaluated average crystallite size of 11.55 nm. Later, the same was verified by employing W–H plot (13.57 nm). UV–Vis spectroscopy revealed an effective band gap of 3 eV suited for photocatalytic applications. The metal-oxygen phonon band at 986.32 cm−1 and 871.96 cm−1 is confirmed using Infrared Spectroscopy (FTIR). The morphological analysis was done using Transmission and Scanning Electron Microscopy (TEM and SEM), which revealed well-dispersed, aggregated structure enclosing spherical nanoparticles with an average size of ∼14 nm. The early precursors were validated using EDAX analysis and SEM. Optical characteristics were investigated using photoluminescence (PL), which revealed a large charge transfer band between 360 nm and 435 nm. The dye removal efficiency of CeO2 NPs was evaluated against Indigo Carmine dye using UV light. The results showed that the significantly adsorption, with more than 70 % removed after 150 min. Kinetic experiments revealed that the depreciation occurred via a pseudo-first-order reaction process. Furthermore, the impacts of certain factors such as dye dosage, pH, reusability, and scavenger on adsorption rate were explored and shown to be effective values for the adsorption process. This study emphasizes the potential of CeO2 NPs as excellent photocatalysts for environmental remediation, especially in dye removal applications.

In-vitro cytotoxicity of biosynthesized nanoceria using Eucalyptus camaldulensis leaves extract against MCF-7 breast cancer cell line

Cerium oxide nanoparticles possess unique properties that make them promising candidates in various fields, including cancer treatment. Among the proposed synthesis methods for CNPs, biosynthesis using natural extracts, offers an eco-friendly and convenient approach for producing CNPs, particularly for biomedical applications. In this study, a novel method of biosynthesis using the aqueous extract of Eucalyptus camaldulensis leaves was used to synthesize CNPs. Scanning electron microscopy and Transmission electron microscopy (TEM) techniques revealed that the synthesized CNPs exhibit a flower-like morphology. The particle size of CNPs obtained using Powder X-ray diffraction peaks and TEM as 13.43 and 39.25 nm. Energy-dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy confirmed the effect of biomolecules during the synthesis process and the formation of CNPs. The cytotoxicity of biosynthesized samples was evaluated using the MTT method demonstrating the potential of these samples to inhibit MCF-7 cancerous cells. The viability of the MCF-7 cell line conducted by live/dead imaging assay confirmed the MTT cytotoxicity method and indicated their potential to inhibit cancerous cells. Furthermore, the successful uptake of CNPs by MCF-7 cancer cells, as demonstrated by confocal microscopy, provides evidence that the intracellular pathway contributes to the anticancer activity of the CNPs. In general, results indicate that the biosynthesized CNPs exhibit significant cytotoxicity against the MCF-7 cancerous cell line, attributed to their high surface area.

Controlled Release of Ceria and Ferric Oxide Nanoparticles via Collagen Hydrogel for Enhanced Osteoarthritis Therapy.

Osteoarthritis (OA), characterized by chronic inflammation and cartilage degeneration, significantly affects over 500 million people globally. Nanoparticles have emerged as promising treatments for OA; however, current strategies often employ a single type of nanoparticle targeting specific disease stages, limiting sustained therapeutic efficacy. In this study, a novel collagen hydrogel is introduced, thiol crosslinked collagen-cerium oxide-poly(D,L-lactic-co-glycolic acid) microspheres encapsulating nanoparticles (CSH-CeO2-pFe2O3), designed for the controlled release of cerium oxide (CeO2) and ferric oxide (Fe2O3) nanoparticles for comprehensive OA management. The sulfhydryl cross-linked collagen matrix embeds CeO2 nanoparticles and poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres encapsulating Fe2O3 nanoparticles. The CSH-CeO2-pFe2O3 hydrogel exhibits enhanced mechanical strength and remarkable injectability, along with a significant promotion of cell adhesion, proliferation, and chondrogenic differentiation. Notably, the hydrogel demonstrates intelligent responsiveness to high levels of reactive oxygen species, initiating the rapid release of CeO2 nanoparticles to address the intense inflammatory responses of early-stage OA, followed by the sustained release of Fe2O3 nanoparticles to facilitate cartilage regeneration during the proliferative phase. In a rat model with cartilage defects, the hydrogel significantly alleviates inflammation and enhances cartilage regeneration, holding substantial potential for effectively managing the pathologically complex OA.

Surfactant-Free Synthesis of Melon Seed-Like CeO2 and Ho@CeO2 Nanostructures with Enriched Oxygen Vacancies: Characterization and Their Enhanced Antibacterial Properties.

To overcome the poor antibacterial performance of cerium oxide (CeO2) nanoparticles at low concentrations, melon seed-shaped CeO2 (MS-CeO2) and holmium (Ho)-doped CeO2 (Ho@MS-CeO2) nanoparticles were synthesized using a simple precipitation method without the addition of any surfactants. The surface morphology, phase structure, crystallinity, Ce3+ and Ce4+ valence, lattice defects, and reactive oxygen species (ROS) production of both synthesized nanostructures were examined using different techniques, i.e., scanning electron microscopy (SEM), energydispersive X-ray (EDX), resolution transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), Raman spectroscopy, ultraviolet (UV) spectra, fluorescence spectra, and zeta potential (ζ). The results show that under certain stirring and aging temperatures, CeO2 and Ho-doped CeO2 nanoparticles with a melon seed-like morphology can be prepared in a short period. Both nanoparticles were tested as antiseptic agents against G+ and G - bacteria (E. coli and S. aureus), and the results confirmed that the Ho@MS-CeO2 nanostructures exhibited remarkable antimicrobial activity at a low concentration (0.5 mg/L) compared with the control group, which is attributed to the reversible conversion of Ce3+ and Ce4+ in the ceria crystal lattice, enriched oxygen vacancy, ROS species production, and positive surface charge.

Electrochemical identification of reductive enantiomers in wood channels: A low-cost and scalable platform for chiral sensing

Chirality, an inherent characteristic of natural substances (such as sugars, peptides, proteins, and nucleic acid), plays a vital role in human metabolism and exerts substantial impacts. In general, chiral drugs can display diverse pharmacological and pharmacokinetic properties. One enantiomer may exhibit therapeutic effects, while the other could cause adverse reactions. Selective recognition of enantiomers is thus a significant task in the biomolecular and pharmaceutical fields. Despite the development of several chiral identification techniques, low-cost enantioselective sensing methods remain highly desirable. Here, we designed and developed an electrochemical sensing device for reductive enantiomer identification using natural wood channels as the substrate. The wood channels were endowed with oxidase-like activity through the in-situ growth of cerium oxide nanoparticles (CeO2). Chiral recognition capability was further introduced by incorporating a layer of chiral ZIF-8 (L-ZIF) as the chiral selector. To demonstrate the enantioselective sensing performance, 3,4-dihydroxyphenylalanine (DOPA) enantiomers were employed as model analytes. Due to the oxidase-like activity and the confinement effect of the proposed channels, the captured DOPA enantiomers were effectively oxidized to their quinone structure, and the Ce(IV) in CeO2 was reduced to Ce(III). These changes led to alterations in the surface charge of the channels, thereby modulating their ionic transport properties. This sensing mechanism also proved useful for the identification of other reductive enantiomers. The limits of detection for l-DOPA and d-DOPA were determined as 2.41 nM and 1.56 nM, respectively. The resulting wood channel-based sensing device not only can be used for the recognition and detection of reductive enantiomers, but also is expected to be applied to the non-electochemically active substances. Moreover, this study offers a novel type of solid-state channel material with low cost, reproducibility, and easy accessibility for electrochemical chiral sensing.

Evaluation of Statistical and Machine Learning Analysis on CRDI Engine using Ternary Fuel doped with Cerium Oxide Nanoadditives

At present, diesel engines are confronted with the formidable task of reconciling aggressive emission regulations with the preservation of intended engine performance. In order to tackle this concern, India can implement a comprehensive strategy that includes waste reduction, recycling programs, and the innovative use of waste-to-energy technologies. The potential synergistic effects of combining fuel mixtures with cerium oxide nanoparticles in CRDI diesel engines remain unexplored. This study employs response surface methodology and MLP regression to investigate these effects. This study explores the experimental design includes variation in blend ratios of karanja biodiesel (upto 20 %), compression ratios (18–22), and injection pressure (400–1200 bar), as well as CeO2 nanoparticle concentrations (50–150 ppm) using 10 % biobutanol. A combination of response surface methodology (RSM) and artificial neural network (ANN) techniques is used to assess and optimise the influence of diverse process parameters on engine responses. The machine learning processor (MLP) regressor model is more capable of forecasting engine responses than RSM modelling, as it has lower MAE, RMSE, and higher R2 values. According to the study, the best blend ratio, CR, Injection Pressure, and CeO2 concentration for the best performance and lowest emissions are 9.97 % biodiesel blend, CR of 20, an injection pressure of 797.4 bar, and CeO2 nanoparticle concentration of 100.1 ppm. The MAE value of the MLP regressor-based model ranged from 0.0011 to 0.0119. In terms of RMSE, MLP regressor-based model outputs are within reasonable boundaries. This study highlights the optimization of engine operating parameters and the application of nanotechnology in biodiesel blends. These findings can lead to the development of durable and eco-friendly fuel alternatives for internal combustion engines, promoting sustainable transportation.