Centroid Size Research Articles

Identification and Distribution of Wedge Clams (Donacidae: Bivalvia) in Thailand by Geometric Morphometric and Molecular Analysis.

The phylogenetic relationship of living Thai Donacidae was herein studied. Two methodologies, geometric morphometrics (GM) and genetic analysis of COI sequences, were combined and applied to identify the valid taxa and explain biodiversity and the distribution pattern in this family. A total of 587 living specimens were tested to analyze the shape and size patterns by Elliptic Fourier Analysis (EFA). Shell identification and GenBank sequences were added to construct the phylogenetic relationship and haplotype network. Centroid size was used to identify the specimens to the subgenus level. Donax (Hecuba) scortum, was easily distinguished from other species by Principal Component analysis (PCA) of shell size and shape. Donax (Dentilatona) incarnatus and Donax (Deltachion) semisulcatus semisulcatus were identified using Canonical Variates Analysis (CVA). Pairwise comparison of EFA was used for species level recognition, particularly shape overlap was observed for medium and small shell size. Based on genetic distance and haplotype network of COI sequences, Donax (Latona) faba and D. (Latona) solidus could be grouped in the same clade. Intraspecific and interspecific genetic data variation of some common species in different geographical localities of Thailand was observed. Three distribution patterns of Donax species were observed along the two-marine system of Thailand.

A geometric morphometric evaluation of facial hard tissue patterns

OBJECTIVE:The purpose of this study was to investigate the size and shape variations of hard tissue patterns in different skeletal relations in Malaysian Malay subjects using the two-dimensional geometric morphometrics method.MATERIALS AND METHODS:A total of 188 lateral cephalograms of adult Malay subjects (aged between 18 and 40 years) with Class I, II, and III skeletal relations were collected. Ten two-dimensional hard tissue landmarks were applied on lateral cephalograms which underwent landmark application and shape analyses as Procrustes ANOVA analysis, principal component analysis, canonical variate analysis, and discriminant function analysis. Statistical analyses were performed to find the mean and variance of each landmark using one-way ANOVA. The raw data from shape analysis were used to calculate the link between landmarks.RESULTS:Skeletal relations showed 16 Principal Components which indicated that variances existed in 16 different dimensions. In Procrustes ANOVA, the Centroid size was significantly different in genders and skeletal relations (P < 0.01). Canonical variate analysis showed the highest Mahalanobis distances and Procrustes distances between Class II and III among skeletal relations and between gender groups (P < 0.0001). Discriminant function analysis showed the classification was mostly accurate, especially for Class II and Class III with success rates of 90.6% and 83.3%, respectively, after cross-validation. The statistical analysis showed significant differences (P < 0.05) in hard tissue landmarks.CONCLUSION:There were different ANB angles in different skeletal relations. The GMM could be used as an alternative tool for diagnosis and treatment planning for craniofacial shape evaluations for future orthodontists and maxillofacial surgeons.

Larval clypeus shape provides an indicator for quantitative discrimination of species and larval stages in Japanese diving beetles Cybister (Coleoptera: Dytiscidae)

Morphological shapes of the larval clypei of seven Cybister diving beetles (Coleoptera: Dytiscidae) from Japan—namely C. brevis Aubé, 1838; C. chinensis Motschulsky, 1854; C. lewisianus Sharp, 1873; C. limbatus (Fabricius, 1775); C. rugosus (Macleay, 1825); C. tripunctatus lateralis (Fabricius, 1798); and C. sugillatus Erichson, 1834—were investigated using landmark-based geometric morphometrics (GM). Younger instar larvae possess clypei with smaller centroid sizes than older larvae in all species. Distinct morphological changes in clypeus are also observed during larval growth. Canonical variate (CV) analysis indicated that CV1 (53.5%) has the most contributing factor explaining shape variations representing clypeus length from anterior to posterior margin. Younger larvae have longer clypei than older ones in all species. Leave-one-out cross-validation indicates that larval clypeus morphology can identify species with greater than 90% accuracy. According to cluster analysis, clypeus shape can also categorize the same species with 99.8% for the first instar larvae and 100% accuracy for the second and third instars. Thus, the GM method can accurately identify species and developmental stages of larvae among the seven Cybister species.

Morphological variations based on geometric morphometrics between male and female pronota of Oxythyrea cinctella (Schaum, 1841) (Coleoptera: Scarabaeidae, Cetoniinae)

In this study, pronotum size and shape were used as an exemplar characteristic to evaluate the utility of pronotal morphology on the sexual dimorphism determination of the scarab beetle Oxythyrea cinctella (Schaum, 1841). Using geometric morphometrics, the sexual size and shape dimorphism of pronotum of 85 specimens (45 females, 40 males) collected from Ankara Province (Turkey) were analyzed. Results of geometric morphometrics revealed that there is statistically significant sexual size and shape dimorphism in pronotum. Further, the mean centroid sizes of the females was significantly larger than that of the males. Finally, multivariate regression results indicated that size has negligible influence on the differentiation in pronotum shape between sexes. We hope the results here presented would be helpful for the further understanding of the sexual dimorphism in the beetle genus Oxythyrea.

Comparing and combining sliding semilandmarks and weighted spherical harmonics for shape analysis.

Quantifying morphological variation is critical for conducting anatomical research. Three-dimensional geometric morphometric (3D GM) landmark analyses quantify shape using homologous Cartesian coordinates (landmarks). Setting up a high-density landmark set and placing it on all specimens, however, can be a time-consuming task. Weighted spherical harmonics (SPHARM) provides an alternative method for analyzing the shape of such objects. Here we compare sliding semilandmark and SPHARM analyses of the calcaneus of Gorilla gorilla gorilla (n=20), Pan troglodytes troglodytes (n=20), and Homo sapiens (n=20) to determine whether the SPHARM and sliding semilandmark analyses capture comparable levels of shape variation. We also compare both the sliding semilandmark and SPHARM analyses to a novel combination of the two methods, here termed SPHARM-sliding. In SPHARM-sliding, the vertices of the surface models produced from the SPHARM analysis (that are the same in number and relative location) are used as the starting landmark positions for a sliding semilandmark analysis. Calcaneal shape variation quantified by all three analyses was summarized using separate principal components analyses. Results were compared using the root mean square (RMS) and maximum distance between surface models of species averages scaled (up) to centroid size created from each analysis. The average RMS was 0.23mm between sliding semilandmark and SPHARM average surface models, 0.19mm between SPHARM and SPHARM sliding average surface models, and 0.22mm between sliding semilandmark and SPHARM sliding average surface models. Although results indicate that all three analyses are comparable methods for 3D shape analysis, there are advantages and disadvantages to each. While the SPHARM analysis is less time-intensive, it is unable to capture the same level of detail around the sharp edges of articular facets on average surface models as the sliding semilandmark analysis. The SPHARM analysis also does not allow for individual articular facets to be analyzed in isolation. SPHARM-sliding, however, captures the same level of detail as the sliding semilandmark analysis, and (as in the sliding semilandmark analysis) allows for the evaluation of individual portions of bone. SPHARM is a comparable method to a 3D GM analysis for small, irregularly shaped bones, such as the calcaneus, and SPHARM-sliding allows for an expedited set up process for a sliding semilandmark analysis.

Association of 3-dimensional facial changes and height and weight increase in children: A 2-year follow-up

This study aimed to evaluate changes in facial size and shape in children and their relationship to the changes in height and weight. One hundred and thirteen healthy children aged between 6 and 13years were followed annually for 2 consecutive years. The facial morphology was captured in 12-month intervals (from T1 to T2 and from T2 to T3) using a 3-dimensional stereophotogrammetric optical scanner; the body height and weight were recorded simultaneously. The changes in facial size and shape were analyzed with geometric morphometrics. Multiple regression mixed-effects models were exploited for evaluation of the association between the changes of facial size or shape and age at the beginning of the observation, gender, and change of height and weight. The centroid size (reflecting facial size) increased from T1 to T2 and T2 to T3 in boys and girls. In contrast, the facial shape did not change during both 12-month observation periods (T1 to T2 and T2 to T3) either in boys or girls. Of 2 multiple regression mixed-effects models, only the model with the change of natural logarithm of centroid size as a dependent variable was statistically significant (P<0.001; adjusted r2=0.29). It showed that height and weight changes were associated with a change of the facial size (with weight change having a greater effect than height change: adjusted r2=0.25 for weight change and adjusted r2=0.106 for height change). Most changes in the facial morphology observed in our cohort were associated with increasing facial size. In contrast, the shape of the face remained relatively constant. Body height and weight gains were associated with the change of the facial size only. However, only 29% of the variation in facial size was explained by height or weight changes during growth.

3D geometric morphometrics analysis of mandibular fragments of Ouranopithecus macedoniensis from the late Miocene deposits of Central Macedonia, Greece.

To explore mandibular shape differences between Ouranopithecus macedoniensis and a comparative sample of extant great apes using three-dimensional (3D) geometrics morphometrics. Other objectives are to assess mandibular shape variation and homogeneity within Ouranopithecus, explore the effects of size on mandibular shape, and explore the degree of mandibular sexual size dimorphism in Ouranopithecus. The comparative sample comprises digitized mandibles from adult extant great apes. The 3D analysis includes three datasets: one with landmarks registered on the mandibular corpus and symphysis of mandibles preserving both sides, one on hemimandibles only, and one focused on the ramus and gonial area. Multivariate statistical analyses were conducted, such as ordination analyses (PCA), intra-specific Procrustes distances pairs, pairwise male-female centroid size differences, and correlation analyses. The male and female specimens of Ouranopithecus have mandibular shapes that are quite similar, although differences exist. The Procrustes distances results suggest more shape variation in Ouranopithecus than in the extant great apes. Ouranopithecus shows some similarities in mandibular shape to the larger great apes, Gorilla and Pongo. Moreover, the degree of sexual dimorphism in the small Ouranopithecus sample is greater than any of the great apes. Based on our correlation analyses of principal components (PC) with size, some PCs are significantly correlated with size, with correlation varying from moderate to substantial. This study attempted to understand better the variation within the mandibles of O. macedoniensis and the expression of sexual dimorphism in this taxon in more detail than has been done previously. The overall mandibular morphology of Ouranopithecus shows some similarities to those of the larger great apes, which likely reflects similarities in size. Compared to Gorilla and Pongo, O. macedoniensis shows an elevated degree of morphological variation, although limitations relating to sample size apply. Sexual dimorphism in the mandibles of O. macedoniensis appears to be relatively high, seemingly greater than in Gorilla and high even in comparison to Pongo, but this again is possibly in part an artifact of a small sample size.

Assessing cervical spine and craniofacial morphology in Class II and Class III malocclusions: A geometric morphometric approach

ABSTRACT To compare craniofacial and cervical morphology between skeletal Classes II and III applying Geometric Morphometric Methods (GMM). Twenty-six cervical and craniofacial landmarks of 40 Class II and 39 Class III individuals were digitalized on lateral cephalograms. Procrustes ANOVA, generalized Procrustes, principal component analyses, and thin-plate spline function were applied to assess the pattern of shape variation of craniofacial structure and the cervical spine in relation to skeletal classes. Compared with Class III, Class II individuals presented a maxillary protrusion, mandibular retrusion, shorter mandibular corpus, posterior mandibular ramus rotation, anterior cranial base rotation, and a smaller centroid size. Furthermore, a forward and smaller cervical spine were observed. With GMM, the shape and size differences between skeletal classes can be analyzed visually and numerically.

A geometric morphometric assessment of shape variation in adult pelvic morphology.

In humans, the pelvis is the most sexually dimorphic skeletal element and is often utilized in aging and sexing remains. The pelvis has become greatly relied upon in anthropological research (e.g., forensics, demographics, obstetrics, evolutionary history); however, pelvis morphology is highly variable, and very little is known about the nature, sources, patterning, and interpretation of this variation. This study aims to quantify pelvis shape variation, document sexual shape variation, and estimate the plasticity of morphology. This will ultimately give greater ability to interpret modern, archaeological, and evolutionary patterns to gain deeper insight into processes which shape human anatomy. Using a sample of 129 Medieval Danish skeletons, shape variation is documented in the greater sciatic notch (GSN), iliac crest (IC), arcuate line (AL), and sub-pubic angle (SPA) using 3D geometric morphometrics. The landmarking method applied here has the advantage of being applicable to fragmentary remains, rather than requiring whole bones. This allows it to be easily applied to archaeological samples and for the interpretation of separate bone features. Differences in shape were statistically analyzed by principle component analysis, linear discriminate analysis, and morphological disparity. Relationships between maximum femur length, body mass, and shape centroid size were also test by allometric regression. Results quantify the sexual dimorphism and shape variation present in these features. The GSN shape is the most variable, while the AL is the least. Similarly, the IC is the only feature which shows almost no dimorphism in shape, and instead best reflects lifestyle/activity patterns. Evidence of dimorphism in the IC is likely a result of cultural labor patterns rather than genetic and hormonal influence. Finally, the shapes of the GSN, AL, and SPA are more related to body mass than to femur length, such that individuals with increased mass exhibit more classically "male" shapes and those with less mass have more "female" shapes. The results have important implications for the evolution of pelvic anatomy, and sexual dimorphism, but also highlight the plasticity inherent in pelvic morphology. Analyzing pelvis features separately in a clearly defined, relatively genetically homogenous population gives insight into the determinants of bone morphology, which are not readily observable by other means. The relationship between body mass and shape suggests dimorphism in body size and composition may affect bone shape.

Statistical shape analysis of putamen in early-onset Parkinson’s disease

ObjectiveTo investigate the shape differences in the putamen of early-onset Parkinson’s patients compared with healthy controls and to assess and to assess sub-regional brain abnormalities. MethodsThis study was conducted using the 3-T MRI scans of 23 early-onset Parkinson’s patients and age and gender matched control subjects. Landmark coordinate data obtained and Procrustes analysis was used to compare mean shapes. The relationships between the centroid sizes of the left and right putamen, and the durations of disease examined using growth curve models. ResultsWhile there was a significant difference between the right putamen shape of control and patient groups, there was not found a significant difference in terms of left putamen. Sub-regional analyses showed that for the right putamen, the most prominent deformations were localized in the middle-posterior putamen and minimal deformations were seen in the anterior putamen. ConclusionAlthough they were not as pronounced as those in the right putamen, the deformations in the left putamen mimic the deformations in the right putamen which are found mainly in the middle-posterior putamen and at a lesser extend in the anterior putamen.

Parallel Evolution of Allometric Trajectories of Trophic Morphology between Sympatric Morphs of Mesoamerican Astyanax (Characidae)

Parallel evolution of the body shape and trophic-related traits has been detected between sympatric pairs of lake-dwelling characin fishes in Mesoamerica. Here, we evaluated the variation in and the ontogenetic allometric trajectories of trophic morphology between sympatric Astyanax morphs (elongate and deep-body) in two geographic systems, Lake Catemaco (Mexico) and San Juan River basin (Nicaragua and Costa Rica). Using geometric morphometrics, we determined the shape variation and disparity in the premaxillary bone, and the patterns of allometric trajectories between morphs in each system. We found a higher differentiation and disparity in the premaxilla shape between morphs from San Juan River basin than between the Lake Catemaco ones. We found shared (parallel evolution) patterns of divergence between systems, which included allometric trajectories showing a positive correlation between the premaxilla shape and log centroid size, as well as trajectories being extended in the elongated-body morph (truncated in the deep-body morph). Regarding the unique patterns of divergence, we recovered parallel allometric trajectories between morphs from Lake Catemaco, while the San Juan River basin morphs showed divergent trajectories. Our results are congruent with the hypothesis that divergence in trophic morphology can be considered a triggering factor in the divergence in the genus Astyanax from Mesoamerica.

Automated description of the mandible shape by deep learning

PurposeThe shape of the mandible has been analyzed in a variety of fields, whether to diagnose conditions like osteoporosis or osteomyelitis, in forensics, to estimate biological information such as age, gender, and race or in orthognathic surgery. Although the methods employed produce encouraging results, most rely on the dry bone analyses or complex imaging techniques that, ultimately, hamper sample collection and, as a consequence, the development of large-scale studies. Thus, we proposed an objective, repeatable, and fully automatic approach to provide a quantitative description of the mandible in orthopantomographies (OPGs).MethodsWe proposed the use of a deep convolutional neural network (CNN) to localize a set of landmarks of the mandible contour automatically from OPGs. Furthermore, we detailed four different descriptors for the mandible shape to be used for a variety of purposes. This includes a set of linear distances and angles calculated from eight anatomical landmarks of the mandible, the centroid size, the shape variations from the mean shape, and a group of shape parameters extracted with a point distribution model.ResultsThe fully automatic digitization of the mandible contour was very accurate, with a mean point to the curve error of 0.21 mm and a standard deviation comparable to that of a trained expert. The combination of the CNN and the four shape descriptors was validated in the well-known problems of forensic sex and age estimation, obtaining 87.8% of accuracy and a mean absolute error of 1.57 years, respectively.ConclusionThe methodology proposed, including the shape model, can be valuable in any field that requires a quantitative description of the mandible shape and a visual representation of its changes such as clinical practice, surgery management, dental research, or legal medicine.

Clinging ability is related to particular aspects of foot morphology in salamanders.

The interaction between morphology, performance, and ecology has long been studied in order to explain variation in the natural world. Within arboreal salamanders, diversification in foot morphology and microhabitat use are thought to be linked by the impact of foot size and shape on clinging and climbing performance, resulting in an ability to access new habitats. We examine whether various foot shape metrics correlate with stationary cling performance and microhabitat to explicitly quantify this performance gradient across 14 species of salamander, including both arboreal and nonarboreal species. Clinging performance did not correlate with foot shape, as quantified by landmark‐based geometric morphometrics, nor with microhabitat use. Mass‐corrected foot centroid size and foot contact area, on the other hand, correlated positively with clinging performance on a smooth substrate. Interestingly, these foot variables correlated negatively with clinging performance on rough substrates, suggesting the use of multiple clinging mechanisms dependent upon the texture of the surface. These findings demonstrate that centroid size and foot contact area are more functionally relevant for clinging in salamanders than foot shape, suggesting that foot shape need not converge in order to achieve convergent performance. More broadly, our results provide an example of how the quantification of the performance gradient can provide the appropriate lens through which to understand the macroevolution of morphology and ecology.

Functional anatomy and adaptation of the third to sixth thoracic vertebrae in primates using three-dimensional geometric morphometrics.

The morphology of the cranial thoracic vertebrae has long been neglected in the study of primate skeletal functional morphology. This study explored the characteristics of the third to sixth thoracic vertebrae among various positional behavioural primates. A total of 67 skeletal samples from four species of hominoids, four of cercopithecoids, and two of platyrrhines were used. Computed tomography images of the thoracic vertebrae were converted to a three-dimensional (3D) bone surface, and 104 landmarks were obtained on the 3D surface. For size-independent shape analysis, the vertebrae were scaled to the same centroid size, and the normalised landmarks were registered using the generalised Procrustes method. Principle components of shape variation among samples were clarified using the variance-covariance matrix of the Procrustes residuals. The present study revealed that the transverse processes were more dorsally positioned in hominoids compared to non-hominoids. The results showed that not only a dorsolaterally oriented but also a dorsally positioned transverse process in relation to the vertebral arch contribute to the greater dorsal depth in hominoids than in monkeys. The thoracic vertebrae of Ateles and Nasalis show relatively dorsoventrally low and craniocaudally long vertebrae with craniocaudally long zygapophyses and craniocaudally long base/short tip of the caudally oriented spinous process, accompanied by a laterally oriented and craniocaudally long base of the transverse process. Despite being phylogenetically separated, the vertebral features of Ateles (suspensory platyrrhine with its prehensile tail's aid) are similar to those of Nasalis (arboreal quadrupedal/jumping/arm-swing colobine). The morphology of the third to sixth thoracic vertebrae tends to reflect the functional adaptation in relation to positional behaviour rather than the phylogenetic characteristics of hominoids, cercopithecoids, and platyrrhines.

Cranial skeletogenesis of one of the largest amphibians, Andrias japonicus, provides insight into ontogenetic adaptations for feeding in salamanders

Abstract Skeletal development in salamanders is greatly influenced by their complex life history. Although the relationship between skull development and life history has been investigated in a variety of salamander species, few studies have compared skull development among lineages. Here, we describe the cranial skeletogenesis of the Japanese giant salamander, Andrias japonicus (family Cryptobranchidae), for the first time. To conduct interspecific comparisons, we also describe the cranial skeletogenesis of Hynobius nebulosus (Hynobiidae), Pleurodeles waltl (Salamandridae) and Ambystoma mexicanum (Ambystomatidae). Our comparative analyses reveal interspecific differences in cranial skeletogenesis, particularly in the timing of the onset of ossification, the direction of ossification (e.g. from anterior to posterior) and the ossification pattern of the hyobranchial skeleton. The early onset of jaw ossification, posterior extension of the maxilla and posterolateral inclination of the squamosal in An. japonicus might be adaptations that allow An. japonicus to gulp feed, primarily using the suction force generated by opening the mouth wide, while also supplementing that force by depressing the hyobranchial skeleton. Multivariate regression of skull shape on log10-transformed centroid size revealed that the unique skull shape of adult and subadult An. japonicus forms through hypermorphosis.

Identification of Race: A Three-Dimensional Geometric Morphometric and Conventional Analysis of Human Fourth Cervical Vertebrae in Adult Malaysian Population

Introduction: Estimation of race plays a significant role in establishing personal identity in forensic anthropology. A cervical vertebra is one of the bones that is least researched in forensic applications. Our study aims to investigate the morphologic variations of the fourth cervical vertebrae (C4) between the different major races in the adult Malaysian population using a three-dimensional (3D) geometric morphometrics method. Methods: Computer tomography images of C4 vertebra, which consist of 386 subjects (169 Malay, 82 Chinese, and 135 Indian) were collected retrospectively from University of Malaya. Twenty-eight landmarks were placed on the images. Procrustes MANOVA, canonical variates analysis(CVA), discriminant function analysis (DFA), and linear measurement were performed using Planmeca Romexis, Checkpoint Stratovan, Morpho J, and Graphpad Prism software respectively to analyze the morphological variations of C4. Results: Procrustes MANOVA showed significant differences in the shape (p &amp;lt;0.0001) and centroid size (p = 0.0003) of the C4 vertebra between races. Canonical variate analysis showed significant differences for Mahalanobis (p &amp;lt;0.0001) and Procrustes (p &amp;lt;0.0001) distances among races. Besides that, a cross-validation value of 66.5% was demonstrated by discriminant function analysis. The use of linear measurements reveals no significant differences between the races, thesemeasurements are the vertebral body height, anterior-posterior length of the vertebral body, length of superior articular facet, and spinous process length. Both intra- and inter-observational reliabilities showed that acceptable human errors for measurement accuracy. Conclusions: Morphologic variations in the shape of C4 can assist in race estimation of the adult Malaysian population using the 3D geometric morphometric approach.

Effects of Preservative Concentrations on Larval Cephalopharyngeal Skeleton of Chrysomya megacephala (Fabricius, 1794) (Diptera: Calliphoridae), an Alternative Indicator to Larval Body Length for mPMI Estimation

Introduction: In forensic entomology, dipterous larval specimens found feeding on decomposing corpses are usually preserved in a range of 70-95% ethanol before being subjected to minimum postmortem interval (mPMI) assessment. However, larval body size, which is commonly used to infer mPMI, can be affected by preservatives resulting miscalculation of estimation. This study compared the effect of ethanol concentrations on larval body and cephalopharyngeal skeleton, a potential substitute to estimate larval age for mPMI estimation. Methods: Experiments were conducted on homogenised colony of Chrysomya megacephala (Fabricius, 1794) (Diptera: Calliphoridae) third instar larvae reared in similar conditions. They were fixed with hot water (»80ºC) and preserved in 70% and 90% ethanol. After seven days in preservatives, larvae were measured for total body length from furthest part of the head to the last abdominal segment. Cephalopharyngeal skeleton was subsequently extracted from the body and measured based on morphometric landmarks on the pharyngeal sclerite. Centroid size of the cephalopharyngeal skeleton was also calculated based on the configuration of five morphometric landmarks. Results: In all four study replicates, pairwise comparisons with the original size indicated that larval body length was significantly affected by ethanol concentration (p&lt;0.001) whilst only two of the study replicates showed cephalopharyngeal skeleton maintained its size when preserved in different ethanol concentration. Conclusion: Possible causes of variations are discussed herein with the results clearly indicated cephalopharyngeal skeleton should be considered as alternative growth parameter for mPMI estimation.

Geometric morphometric analysis of growth patterns among facial types

Introduction:Extreme patterns of vertical facial divergence are of great importance to clinicians because of their association with dental malocclusion and functional problems of the orofacial complex. Understanding the growth patterns associated with vertical facial divergence is critical for clinicians to provide optimal treatment. This study evaluates and compares growth patterns from childhood to adulthood among 3 classifications of vertical facial divergence using longitudinal, lateral cephalograms from the Craniofacial Growth Consortium Study.Methods:Participants (183 females, 188 males) were classified into 1 of 3 facial types on the basis of their adult mandibular plane angle (MPA): hyperdivergent (MPA >39°; n = 40), normodivergent (28° ≤ MPA ≤ 39°; n = 216), and hypodivergent (MPA <28°; n = 115). Each individual had 5 cephalograms between ages 6 and 20 years. A set of 36 cephalometric landmarks were digitized on each cephalogram. Landmark configurations were superimposed to align 5 homologous landmarks of the anterior cranial base and scaled to unit centroid size. Growth trajectories were calculated using multivariate regression for each facial type and sex combination.Results:Divergent growth trajectories were identified among facial types, finding more similarities in normodivergent and hypodivergent growth patterns than either share with the hyperdivergent group. Through the use of geometric morphometric methods, new patterns of facial growth related to vertical facial divergence were identified. Hyperdivergent growth exhibits a downward rotation of the maxillomandibular complex relative to the anterior cranial base, in addition to the increased relative growth of the lower anterior face. Conversely, normodivergent and hypodivergent groups exhibit stable positioning of the maxilla relative to the anterior cranial base, with the forward rotation of the mandible. Furthermore, the hyperdivergent maxilla and mandible become relatively shorter and posteriorly positioned with age compared with the other groups.Conclusions:This study demonstrates how hyperdivergent growth, particularly restricted growth and positioning of the maxilla, results in a higher potential risk for Class II malocclusion. Future work will investigate growth patterns within each classification of facial divergence.

Effect of septal deviation on nasomaxillary shape: A geometric morphometric study.

Nasal cavities in their primitive stage communicate with the oral cavity until the 8th week of intrauterine life where the posterior palate initiates its development. Hence, starting from the initial growth phases, a significant connection lays between the nasal structures and the maxillary bone and witnessing key functional roles, among which the respiration. Proper nasal breathing has been proven to be a crucial factor for the maturity of the craniofacial complex, and obstruction of the respiratory airway due to nasal septum deviation can generate clinically significant reduction of the nasal airflow. This situation will imply irreversible repercussions that hinders the harmonious development of the craniofacial complex. In order to understand such potential impacts of septal deviation, our first objective was to materialize the relation between septum deviation, and both nasal cavity and maxillary structures. For the second objective, we used Procrustes analysis to assess the shape variation of these two anatomical regions, the bivariate plots of Principal Components to evaluate their shape space, and a two-block Partial Least Square (PLS) to explore their covariation. We analysed, in this cross-sectional study, 62 posteroanterior cephalometric radiographs of adult subjects from both sexes (23males, 39 females; mean age 25.3years) collected from the database of the Department of Orthodontics at Lebanese University. Landmarks were plotted and variables were calculated and divided into nasal septum, nasal cavity and maxillary ones. The sample was further divided into two groups based on septal deviation severity (a septal deviation is considered minor if <6). The results suggested that nasal septum deviation was correlated to reduced nasal cavity area and a reduced maxillary area. Moreover, the comparison of the two groups concluded that the difference between all variables was statistically significant with higher scores in the minor septal deviation group. These findings were corroborated with the shape analysis where the mean centroid size of nasal cavity and that of the maxilla in the group of reduced septal deviation were significantly greater than those of the group with increased angle of deviation. Results of PLS analysis concluded to a strong covariation between nasal septum and nasomaxillary complex. These conclusions support the early septoplasty in growing patients as a solution to redirect the normal course of growth and re-establish a good function of the nasomaxillary complex.

When do apples stop growing, and why does it matter?

Apples in the commercial food chain are harvested up to two weeks before maturity. We explore apple fruit development through the growing season to establish the point at which physical features differentiating those cultivars become evident. This is relevant both for the understanding of the growing process and to ensure that any identification and classification tools can be used both on ripened-on-tree and stored fruit. Current literature presents some contradictory findings on apple growth, we studied 12 apple cultivars in the Brogdale National Fruit Collection, UK over two seasons to establish patterns of growth. Fruit were sampled at regular time points throughout the growing season and four morphometrics (maximum length, maximum diameter, weight, and centroid size) were collected. These were regressed against growing degree days in order to appropriately describe the growth pattern observed. All four morphometrics were adequately described using log-log linear regressions, with adjusted R2 estimates ranging from 78.3% (maximum length) to 86.7% (weight). For all four morphometrics, a 10% increase in growing degree days was associated with a 1% increase in the morphometric. Our findings refine previous work presenting rapid early growth followed by a plateau in later stages of development and contrast with published expo-linear models. We established that apples harvested for commercial storage purposes, two weeks prior to maturity, showed only a modest decrease in size compared with ripened-on-tree fruit, demonstrating that size morphometric approaches are appropriate for classification of apple fruit at point of harvest.