Cellular Forces Research Articles

Multifunctional role of GPCR signaling in epithelial tube formation

Epithelial tube formation requires Rho1-dependent actomyosin contractility to generate the cellular forces that drive cell shape changes and rearrangement. Rho1 signaling is activated by G-protein-coupled receptor (GPCR) signaling at the cell surface. During Drosophila embryonic salivary gland (SG) invagination, the GPCR ligand Folded gastrulation (Fog) activates Rho1 signaling to drive apical constriction. The SG receptor that transduces the Fog signal into Rho1-dependent myosin activation has not been identified. Here, we reveal that the Smog GPCR transduces Fog signal to regulate Rho kinase accumulation and myosin activation in the medioapical region of cells to control apical constriction during SG invagination. We also report on unexpected Fog-independent roles for Smog in maintaining epithelial integrity and organizing cortical actin. Our data support a model wherein Smog regulates distinct myosin pools and actin cytoskeleton in a ligand-dependent manner during epithelial tube formation.

The Role of the Fibronectin Synergy Site for Skin Wound Healing

Skin is constantly exposed to injuries that are repaired with different outcomes, either regeneration or scarring. Scars result from fibrotic processes modulated by cellular physical forces transmitted by integrins. Fibronectin (FN) is a major component in the provisional matrix assembled to repair skin wounds. FN enables cell adhesion binding of α5β1/αIIbβ3 and αv-class integrins to an RGD-motif. An additional linkage for α5/αIIb is the synergy site located in close proximity to the RGD motif. The mutation to impair the FN synergy region (Fn1syn/syn) demonstrated that its absence permits complete development. However, only with the additional engagement to the FN synergy site do cells efficiently resist physical forces. To test how the synergy site-mediated adhesion affects the course of wound healing fibrosis, we used a mouse model of skin injury and in-vitro migration studies with keratinocytes and fibroblasts on FNsyn. The loss of FN synergy site led to normal re-epithelialization caused by two opposing migratory defects of activated keratinocytes and, in the dermis, induced reduced fibrotic responses, with lower contents of myofibroblasts and FN deposition and diminished TGF-β1-mediated cell signalling. We demonstrate that weakened α5β1-mediated traction forces on FNsyn cause reduced TGF-β1 release from its latent complex.

Fibronectin anchoring to viscoelastic poly(dimethylsiloxane) elastomers controls fibroblast mechanosensing and directional motility

The established link between deregulated tissue mechanics and various pathological states calls for the elucidation of the processes through which cells interrogate and interpret the mechanical properties of their microenvironment. In this work, we demonstrate that changes in the presentation of the extracellular matrix protein fibronectin on the surface of viscoelastic silicone elastomers have an overarching effect on cell mechanosensing, that is independent of bulk mechanics. Reduction of surface hydrophilicity resulted in altered fibronectin adsorption strength as monitored using atomic force microscopy imaging and pulling experiments. Consequently, primary human fibroblasts were able to remodel the fibronectin coating, adopt a polarized phenotype and migrate directionally even on soft elastomers, that otherwise were not able to resist the applied traction forces. The findings presented here provide valuable insight on how cellular forces are regulated by ligand presentation and used by cells to probe their mechanical environment, and have implications on biomaterial design for cell guidance.

Polarized light retardation analysis allows for the evaluation of tension in individual stress fibers

The tension in the stress fibers (SFs) of cells plays a pivotal role in determining biological processes such as cell migration, morphological formation, and protein synthesis. Our previous research developed a method to evaluate the cellular contraction force generated in SFs based on photoelasticity-associated retardation of polarized light; however, we employed live cells, which could have caused an increase in retardation and not contraction force. Therefore, the present study aimed to confirm that polarized light retardation increases inherently due to contraction, regardless of cell activity. We also explored the reason why retardation increased with SF contractions. We used SFs physically isolated from vascular smooth muscle cells to stop cell activity. The retardation of SFs was measured after ATP administration, responsible for contracting SFs. The SFs were imaged under optical and electron microscopes to measure SF length, width, and retardation. The retardation of isolated SFs after ATP administration was significantly higher than before. Thus, we confirmed that retardation increased with elevated tension in individual SFs. Furthermore, the SF diameter decreased while the SF length remained almost constant. Thus, we conclude that a contraction force-driven increase in the density of SFs is the main factor for the rise in polarized light retardation.

A Stiff Extracellular Matrix Favors the Mechanical Cell Competition that Leads to Extrusion of Bacterially-Infected Epithelial Cells

Cell competition refers to the mechanism whereby less fit cells (“losers”) are sensed and eliminated by more fit neighboring cells (“winners”) and arises during many processes including intracellular bacterial infection. Extracellular matrix (ECM) stiffness can regulate important cellular functions, such as motility, by modulating the physical forces that cells transduce and could thus modulate the output of cellular competitions. Herein, we employ a computational model to investigate the previously overlooked role of ECM stiffness in modulating the forceful extrusion of infected “loser” cells by uninfected “winner” cells. We find that increasing ECM stiffness promotes the collective squeezing and subsequent extrusion of infected cells due to differential cell displacements and cellular force generation. Moreover, we discover that an increase in the ratio of uninfected to infected cell stiffness as well as a smaller infection focus size, independently promote squeezing of infected cells, and this phenomenon is more prominent on stiffer compared to softer matrices. Our experimental findings validate the computational predictions by demonstrating increased collective cell extrusion on stiff matrices and glass as opposed to softer matrices, which is associated with decreased bacterial spread in the basal cell monolayer in vitro. Collectively, our results suggest that ECM stiffness plays a major role in modulating the competition between infected and uninfected cells, with stiffer matrices promoting this battle through differential modulation of cell mechanics between the two cell populations.

Differential Impacts on Tensional Homeostasis of Gastric Cancer Cells Due to Distinct Domain Variants of E-Cadherin.

Simple SummaryTensional homeostasis describes the ability of cells and tissues to maintain their internal mechanical tension stable at a set point value. A breakdown of tensional homeostasis is the hallmark of disease progression, including cancers. In cancers of epithelial origin, this phenomenon is closely associated with dysfunction of E-cadherin. In this study, we investigated how E-cadherin mutations identified in patients with cancer affect tensional homeostasis. Our results show that mutations affecting the juxtamembrane and intracellular domains of E-cadherin are detrimental for tensional homeostasis of gastric cancer cells.In epithelia, breakdown of tensional homeostasis is closely associated with E-cadherin dysfunction and disruption of tissue function and integrity. In this study, we investigated the effect of E-cadherin mutations affecting distinct protein domains on tensional homeostasis of gastric cancer cells. We used micropattern traction microscopy to measure temporal fluctuations of cellular traction forces in AGS cells transfected with the wild-type E-cadherin or with variants affecting the extracellular, the juxtamembrane, and the intracellular domains of the protein. We focused on the dynamic aspect of tensional homeostasis, namely the ability of cells to maintain a consistent level of tension, with low temporal variability around a set point. Cells were cultured on hydrogels micropatterned with different extracellular matrix (ECM) proteins to test whether the ECM adhesion impacts cell behavior. A combination of Fibronectin and Vitronectin was used as a substrate that promotes the adhesive ability of E-cadherin dysfunctional cells, whereas Collagen VI was used to test an unfavorable ECM condition. Our results showed that mutations affecting distinct E-cadherin domains influenced differently cell tensional homeostasis, and pinpointed the juxtamembrane and intracellular regions of E-cadherin as the key players in this process. Furthermore, Fibronectin and Vitronectin might modulate cancer cell behavior towards tensional homeostasis.

Actomyosin contractility and buckling of microtubules in nucleation, growth and disassembling of focal adhesions

Building up and maintenance of cytoskeletal structure in living cells are force-dependent processes involving a dynamic chain of polymerization and depolymerization events, which are also at the basis of cells’ remodelling and locomotion. All these phenomena develop by establishing cell–matrix interfaces made of protein complexes, known as focal adhesions, which govern mechanosensing and mechanotransduction mechanisms mediated by stress transmission between cell interior and external environment. Within this framework, by starting from a work by Cao et al. (Biophys J 109:1807–1817, 2015), we here investigate the role played by actomyosin contractility of stress fibres in nucleation, growth and disassembling of focal adhesions. In particular, we propose a tensegrity model of an adherent cell incorporating nonlinear elasticity and unstable behaviours, which provides a new kinematical interpretation of cellular contractile forces and describes how stress fibres, microtubules and adhesion plaques interact mechanobiologically. The results confirm some experimental evidences and suggest how the actomyosin contraction level could be exploited by cells to actively control their adhesion, eventually triggering cytoskeleton reconfigurations and migration processes observed in both physiological conditions and diseases.

Sara Wickström: The forces controlling our cell fate.

Sara Wickström combines biophysics, next-generation sequencing, and basic cell biology to investigate how cellular forces regulate the fate and position of stem cells within epithelial tissues.

A redox-dependent thiol-switch and a Ca2+ binding site within the hinge region hierarchically depend on each other in α7β1 integrin regulation

Integrin-mediated cell contacts with the extracellular matrix (ECM) are essential for cellular adhesion, force transmission, and migration. Several effectors, such as divalent cations and redox-active compounds, regulate ligand binding activities of integrins and influence their cellular functions. To study the role of the Ca2+ binding site within the hinge region of the integrin α7 subunit, we genetically abrogated it in the α7hiΔCa mutant. This mutant folded correctly, associated with the β1 subunit and was exposed on the cell surface, but showed reduced ligand binding and weaker cell adhesion to laminin-111. Thus, it resembles the α7hiΔSS mutant, in which the redox-regulated pair of cysteines, closeby to the Ca2+ binding site within the hinge, was abrogated. Comparing both mutants in adhesion strength and cell migration revealed that both Ca2+ complexation and redox-regulation within the hinge interdepend on each other. Moreover, protein-chemical analyses of soluble integrin ectodomains containing the same α7 hinge mutations suggest that integrin activation via the subunit α hinge is primed by the formation of the cysteine pair–based crosslinkage. Then, this allows Ca2+ complexation within the hinge, which is another essential step for integrin activation and ligand binding. Thus, the α hinge is an allosteric integrin regulation site, in which both effectors, Ca2+ and redox-active compounds, synergistically and hierarchically induce far-ranging conformational changes, such as the extension of the integrin ectodomain, resulting in integrin activation of ECM ligand binding and altered integrin-mediated cell functions.

Measuring Cytoskeletal Mechanical Fluctuations and Rheology with Active Micropost Arrays.

The dynamics of the cellular actomyosin cytoskeleton are crucial to many aspects of cellular function. Here, we describe techniques that employ active micropost array detectors (AMPADs) to measure cytoskeletal rheology and mechanical force fluctuations. The AMPADS are arrays of flexible poly(dimethylsiloxane) (PDMS) microposts with magnetic nanowires embedded in a subset of microposts to enable actuation of those posts via an externally applied magnetic field. Techniques are described to track the magnetic microposts’ motion with nanometer precision at up to 100 video frames per second to measure the local cellular rheology at well‐defined positions. Application of these high‐precision tracking techniques to the full array of microposts in contact with a cell also enables mapping of the cytoskeletal mechanical fluctuation dynamics with high spatial and temporal resolution. This article describes (1) the fabrication of magnetic micropost arrays, (2) measurement protocols for both local rheology and cytoskeletal force fluctuation mapping, and (3) special‐purpose software routines to reduce and analyze these data. © 2022 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Fabrication of magnetic micropost arrays Basic Protocol 2: Data acquisition for cellular force fluctuations on non‐magnetic micropost arrays Basic Protocol 3: Data acquisition for local cellular rheology measurements with magnetic microposts Basic Protocol 4: Data reduction: determining microposts’ motion Basic Protocol 5: Data analysis: determining local rheology from magnetic microposts Basic Protocol 6: Data analysis for force fluctuation measurements Support Protocol 1: Fabrication of magnetic Ni nanowires by electrodeposition Support Protocol 2: Configuring Streampix for magnetic rheology measurements

Deep-learning-based 3D cellular force reconstruction directly from volumetric images

The forces exerted by single cells in the three-dimensional (3D) environments play a crucial role in modulating cellular functions and behaviors closely related to physiological and pathological processes. Cellular force microscopy (CFM) provides a feasible solution for quantifying mechanical interactions, which usually regains cellular forces from deformation information of extracellular matrices embedded with fluorescent beads. Owing to computational complexity, traditional 3D-CFM is usually extremely time consuming, which makes it challenging for efficient force recovery and large-scale sample analysis. With the aid of deep neural networks, this study puts forward a novel, data-driven 3D-CFM to reconstruct 3D cellular force fields directly from volumetric images with random fluorescence patterns. The deep-learning-based network is established through stacking deep convolutional neural networks (DCNN) and specific function layers. Some necessary physical information associated with constitutive relation of extracellular matrix material is coupled to the data-driven network. The mini-batch stochastic-gradient-descent and back-propagation algorithms are introduced to ensure its convergence and training efficiency. The networks not only have good generalization ability and robustness but also can recover 3D cellular forces directly from the input fluorescence image pairs. Particularly, the computational efficiency of the deep-learning-based network is at least one to two orders of magnitude higher than that of traditional 3D-CFM. This study provides a novel scheme for developing high-performance 3D-CFM to quantitatively characterize mechanical interactions between single cells and surrounding extracellular matrices, which is of vital importance for quantitative investigations in biomechanics and mechanobiology.

Wrinkle force microscopy: a machine learning based approach to predict cell mechanics from images

Combining experiments with artificial intelligence algorithms, we propose a machine learning based approach called wrinkle force microscopy (WFM) to extract the cellular force distributions from the microscope images. The full process can be divided into three steps. First, we culture the cells on a special substrate allowing to measure both the cellular traction force on the substrate and the corresponding substrate wrinkles simultaneously. The cellular forces are obtained using the traction force microscopy (TFM), at the same time that cell-generated contractile forces wrinkle their underlying substrate. Second, the wrinkle positions are extracted from the microscope images. Third, we train the machine learning system with GAN (generative adversarial network) by using sets of corresponding two images, the traction field and the input images (raw microscope images or extracted wrinkle images), as the training data. The network understands the way to convert the input images of the substrate wrinkles to the traction distribution from the training. After sufficient training, the network is utilized to predict the cellular forces just from the input images. Our system provides a powerful tool to evaluate the cellular forces efficiently because the forces can be predicted just by observing the cells under the microscope, which is much simpler method compared to the TFM experiment. Additionally, the machine learning based approach presented here has the profound potential for being applied to diverse cellular assays for studying mechanobiology of cells.

Simplified, High-throughput Analysis of Single-cell Contractility using Micropatterned Elastomers

Cellular contractile force generation is a fundamental trait shared by virtually all cells. These contractile forces are crucial to proper development, function at both the cellular and tissue levels,and regulate the mechanical systems in the body. Numerous biological processes are force-dependent, including motility, adhesion, and division of single-cells, as well as contraction and relaxation of organs such as the heart, bladder, lungs, intestines, and uterus. Given its importance in maintaining proper physiological function, cellular contractility can also drive disease processes when exaggerated or disrupted. Asthma, hypertension, preterm labor, fibrotic scarring, and underactive bladder are all examples of mechanically driven disease processes that could potentially be alleviated with proper control of cellular contractile force. Here, we present a comprehensive protocol for utilizing a novel microplate-based contractility assay technology known as fluorescently labeled elastomeric contractible surfaces (FLECS), that provides simplified and intuitive analysis of single-cell contractility in a massively scaled manner. Herein, we provide a step-wise protocol for obtaining two six-point dose-response curves describing the effects of two contractile inhibitors on the contraction of primary human bladder smooth muscle cells in a simple procedure utilizing just a single FLECS assay microplate, to demonstrate proper technique to users of the method. Using FLECS Technology, all researchers with basic biological laboratories and fluorescent microscopy systems gain access to studying this fundamental but difficult-to-quantify functional cell phenotype, effectively lowering the entry barrier into the field of force biology and phenotypic screening of contractile cell force.

Simplified, High-throughput Analysis of Single-cell Contractility using Micropatterned Elastomers.

Cellular contractile force generation is a fundamental trait shared by virtually all cells. These contractile forces are crucial to proper development, function at both the cellular and tissue levels,and regulate the mechanical systems in the body. Numerous biological processes are force-dependent, including motility, adhesion, and division of single-cells, as well as contraction and relaxation of organs such as the heart, bladder, lungs, intestines, and uterus. Given its importance in maintaining proper physiological function, cellular contractility can also drive disease processes when exaggerated or disrupted. Asthma, hypertension, preterm labor, fibrotic scarring, and underactive bladder are all examples of mechanically driven disease processes that could potentially be alleviated with proper control of cellular contractile force. Here, we present a comprehensive protocol for utilizing a novel microplate-based contractility assay technology known as fluorescently labeled elastomeric contractible surfaces (FLECS), that provides simplified and intuitive analysis of single-cell contractility in a massively scaled manner. Herein, we provide a step-wise protocol for obtaining two six-point dose-response curves describing the effects of two contractile inhibitors on the contraction of primary human bladder smooth muscle cells in a simple procedure utilizing just a single FLECS assay microplate, to demonstrate proper technique to users of the method. Using FLECS Technology, all researchers with basic biological laboratories and fluorescent microscopy systems gain access to studying this fundamental but difficult-to-quantify functional cell phenotype, effectively lowering the entry barrier into the field of force biology and phenotypic screening of contractile cell force.

Glycosaminoglycans modulate long-range mechanical communication between cells in collagen networks

Cells can sense and respond to mechanical forces in fibrous extracellular matrices (ECMs) over distances much greater than their size. This phenomenon, termed long-range force transmission, is enabled by the realignment (buckling) of collagen fibers along directions where the forces are tensile (compressive). However, whether other key structural components of the ECM, in particular glycosaminoglycans (GAGs), can affect the efficiency of cellular force transmission remains unclear. Here we developed a theoretical model of force transmission in collagen networks with interpenetrating GAGs, capturing the competition between tension-driven collagen fiber alignment and the swelling pressure induced by GAGs. Using this model, we show that the swelling pressure provided by GAGs increases the stiffness of the collagen network by stretching the fibers in an isotropic manner. We found that the GAG-induced swelling pressure can help collagen fibers resist buckling as the cells exert contractile forces. This mechanism impedes the alignment of collagen fibers and decreases long-range cellular mechanical communication. We experimentally validated the theoretical predictions by comparing the intensity of collagen fiber alignment between cellular spheroids cultured on collagen gels versus collagen–GAG cogels. We found significantly lower intensities of aligned collagen in collagen–GAG cogels, consistent with the prediction that GAGs can prevent collagen fiber alignment. The role of GAGs in modulating force transmission uncovered in this work can be extended to understand pathological processes such as the formation of fibrotic scars and cancer metastasis, where cells communicate in the presence of abnormally high concentrations of GAGs.

Point forces in elasticity equation and their alternatives in multi dimensions

Deep dermal wounds induce skin contraction as a result of the traction forcing exerted by (myo)fibroblasts on their immediate environment. These (myo)fibroblasts are skin cells that are responsible for the regeneration of collagen that is necessary for the integrity of skin We consider several mathematical issues regarding models that simulate traction forces exerted by (myo)fibroblasts. Since the size of cells (e.g. (myo)fibroblasts) is much smaller than the size of the domain of computation, one often considers point forces, modelled by Dirac Delta distributions on boundary segments of cells to simulate the traction forces exerted by the skin cells. In the current paper, we treat the forces that are directed normal to the cell boundary and toward the cell centre. Since it can be shown that there exists no smooth solution, at least not in H1 for solutions to the governing momentum balance equation, we analyse the convergence and quality of approximation. Furthermore, the expected finite element problems that we get necessitate to scrutinize alternative model formulations, such as the use of smoothed Dirac Delta distributions, or the so-called smoothed particle approach as well as the so-called ‘hole’ approach where cellular forces are modelled through the use of (natural) boundary conditions. In this paper, we investigate and attempt to quantify the conditions for consistency between the various approaches. This has resulted into error analyses in the L2-norm of the numerical solution based on Galerkin principles that entail Lagrangian basis functions. The paper also addresses well-posedness in terms of existence and uniqueness. The current analysis has been performed for the linear steady-state (hence neglecting inertia and damping) momentum equations under the assumption of Hooke’s law.

Exploring Integrin-Mediated Force Transmission during Confined Cell Migration by DNA-Based Tension Probes.

Mechanical forces have profound effects on the morphology and migration of cells in a two-dimensional environment. However, cells in vivo mostly migrate in three-dimensional space while physically constrained, and the mechanism by which cellular dynamic forces drive migration in this confined environment is unclear. Here, we present a method of fabricating microfluidic chips with integrated DNA-based tension probes to measure spatiotemporal variations in integrin-mediated force exerted during confined cell migration. Using this developed device, we measured the spatial locations, magnitudes, and temporal characteristics of integrin-ligand tension signals in motile cells in different microchannels and found that cells exerted less force and underwent increasingly transitory integrin-ligand interactions when migrating in confined spaces. This study demonstrates that the described method provides insights into understanding the migratory machinery of cells in geometrically confined environment that better mimics physiological conditions.

Integrative Toolkit to Analyze Cellular Signals: Forces, Motion, Morphology, and Fluorescence

Quantitative assessment of cellular forces and motion advanced considerably over the last four decades. These advancements provided the framework to examine insightful mechanical signaling processes in cell culture systems. However, the field currently faces three problems: lack of quality standardization of the acquired data, technical errors in data analysis and visualization, and perhaps most importantly, the technology remains largely out of reach for common cell biology laboratories. To overcome these limitations, we developed a new experimental platform - Integrative Toolkit to Analyze Cellular Signals (iTACS). iTACS consists of two components: Acquisition and Training Module (AcTrM) and Analysis and Visualization Module (AnViM). AcTrM is based on µManager - an NIH-ImageJ-based microscope control software - and facilitates user self-training and automation of common image acquisition protocols. AnViM is based on NIH-ImageJ and facilitates user-friendly automation of data analysis and insightful visualization of results. These experiments involve culturing adherent cells on hydrogels, imaging fiducial markers embedded in the hydrogel, and finally extracting from these images a comprehensive mechanical characterization of the cells. Currently, iTACS enables the user to analyze and track a wide array of properties, including morphology, motion, cytoskeletal forces, and fluorescence of individual cells and their neighboring region. The quality standardization issue was addressed in AcTrM with, a reference image-guided refocusing technique. The technical issues in data analysis were addressed in AnViM with a multi-pronged image segmentation procedure, a user-friendly approach to identify boundary conditions, and a novel cellular property-based data visualization. AcTrM is designed to facilitate the straightforward transformation of basic fluorescence microscopes into experimental cell mechanics rigs, and AnViM is equipped to enable users to measure cellular mechanical signals without requiring an engineering background. iTACS will be available to the research community as an open-source suite with community-driven development capabilities.

Integrative Toolkit to Analyze Cellular Signals: Forces, Motion, Morphology, and Fluorescence.

Quantitative assessment of cellular forces and motion advanced considerably over the last four decades. These advancements provided the framework to examine insightful mechanical signaling processes in cell culture systems. However, the field currently faces three problems: lack of quality standardization of the acquired data, technical errors in data analysis and visualization, and perhaps most importantly, the technology remains largely out of reach for common cell biology laboratories. To overcome these limitations, we developed a new experimental platform - Integrative Toolkit to Analyze Cellular Signals (iTACS). iTACS consists of two components: Acquisition and Training Module (AcTrM) and Analysis and Visualization Module (AnViM). AcTrM is based on µManager - an NIH-ImageJ-based microscope control software - and facilitates user self-training and automation of common image acquisition protocols. AnViM is based on NIH-ImageJ and facilitates user-friendly automation of data analysis and insightful visualization of results. These experiments involve culturing adherent cells on hydrogels, imaging fiducial markers embedded in the hydrogel, and finally extracting from these images a comprehensive mechanical characterization of the cells. Currently, iTACS enables the user to analyze and track a wide array of properties, including morphology, motion, cytoskeletal forces, and fluorescence of individual cells and their neighboring region. The quality standardization issue was addressed in AcTrM with, a reference image-guided refocusing technique. The technical issues in data analysis were addressed in AnViM with a multi-pronged image segmentation procedure, a user-friendly approach to identify boundary conditions, and a novel cellular property-based data visualization. AcTrM is designed to facilitate the straightforward transformation of basic fluorescence microscopes into experimental cell mechanics rigs, and AnViM is equipped to enable users to measure cellular mechanical signals without requiring an engineering background. iTACS will be available to the research community as an open-source suite with community-driven development capabilities.

High-Throughput Screening of a Promoter Library Reveals New Persister Mechanisms in Escherichia Coli.

ABSTRACTPersister cells are a small subpopulation of phenotypic variants that survive high concentrations of bactericidal antibiotics. Their survival mechanisms are not heritable and can be formed stochastically or triggered by environmental stresses such as antibiotic treatment. In this study, high-throughput screening of an Escherichia coli promoter library and subsequent validation experiments identified several genes whose expression was upregulated by antibiotic treatment. Among the identified genes, waaG, guaA, and guaB were found to be important in persister cell formation in E. coli as their deletion significantly enhanced the sensitivity of cells to various antibiotics. The GuaA and GuaB enzymes form the upstream reactions of ppGpp (a global persister molecule) biosynthesis, and the deletion of guaA and guaB drastically perturbs the ppGpp regulon in E. coli. WaaG, a lipopolysaccharide glucosyltransferase, plays an important role in shaping the outer membrane structure, and the deletion of waaG dissipates the proton gradient (ΔpH) component of cellular proton motive force (PMF), perturbs cellular ATP production, and reduces type I persister formation in stationary phase. Active respiration in the stationary phase, which drives the PMF, was previously shown to play a critical role in type I persister formation, and our results associated with the waaG deficient strain further corroborate these findings.IMPORTANCE Persistence is a nonheritable trait by which normal growing cells switch phenotypically to antibiotic tolerant persister cells. This transient state enables persister cells to recover and grow into an antibiotic-sensitive population. Persister cells have been observed in many pathogenic and nonpathogenic bacteria. Previous studies highlight the complexity and diversity of bacterial persister-cell mechanisms, many of which still remain to be elucidated. Here, using promoter and knockout cell libraries in Escherichia coli, we have identified genes that reveal novel persister mechanisms. As persistence is a critical survival strategy that evolved in many bacteria, our study will enhance the current molecular-level understanding of this conserved mechanism.