Cell Sheet Technique Research Articles

Transplantation of Neural Progenitor Cells Derived from Stem Cells from Apical Papilla Through Small-Molecule Induction in a Rat Model of Sciatic Nerve Injury

Background:Stem cell-based transplantation therapy holds promise for peripheral nerve injury treatment, but adult availability is limited. A cell culture protocol utilizing a small-molecule cocktail effectively reprogrammed stem cells from apical papilla (SCAPs) into neural progenitor cells, subsequently differentiating into neuron-like cells. This study aims to evaluate neural-induced SCAPs, with and without small-molecule cocktail, for sciatic nerve repair potential.Methods:A scaffold-free cell sheet technique was used to construct a three-dimensional cell sheet. Subsequently, this cell sheet was carefully rolled into a tube and seamlessly inserted into a collagen conduit, which was then transplanted into a 5 mm sciatic nerve injury rat model. Functional sciatic nerve regeneration was evaluated via toe spread test, walking track analysis and gastrocnemius muscle weight. Additionally, degree of sciatic nerve regeneration was determined based on total amount of myelinated fibers.Results:Small-molecule cocktail induced SCAPs enhanced motor function recovery, evident in improved sciatic function index and gastrocnemius muscle retention. We also observed better host myelinated fiber retention than undifferentiated SCAPs or neural-induced SCAPs without small-molecule cocktail. However, clusters of neuron-like cell bodies (surrounded by sparse myelinated fibers) were found in all cell sheet-implanted groups in the implantation region. This suggests that while the implanted cells likely survived transplantation, integration was poor and would likely hinder long-term recovery by occupying the space needed for host nerve fibers to project through.Conclusion:Neural-induced SCAPs with small-molecule cocktail demonstrated promising benefits for nerve repair; further research is needed to improve its integration and optimize its potential for long-term recovery.

Cell sheet produced from periodontal ligament stem cells activated by PAR1 improves osteogenic differentiation.

Periodontal regeneration is a challenge, and tissue engineering based on periodontal ligament stem cells (PDLSCs) has been shown to be a promising alternative to this process. However, the need for scaffolds has limited the therapeutic use of PDLSCs. In this context, scaffold-free tissue engineering using the cell sheet (CS) technique has been developed as an alternative approach to improve tissue regeneration. Previously, we showed that Protease-activated receptor-1 (PAR1) can regulate PDLSCs. Herein, we evaluate whether PAR1 influences osteogenesis in CSs produced from PDLSCs, without the use of scaffolds. PDLSCs were isolated and immunophenotyped. Then, CSs were obtained by supplementing the culture medium with ascorbic acid (50 µg/mL), and PAR1 was activated through its agonist peptide (100 nM). Scaffold-free 3D CSs were successfully produced from PDLSCs, and they showed higher proliferation potential than isolated PDLSCs. Also, PAR1 activation decreased senescence and improved osteogenic differentiation of CSs by increasing mineralized nodule deposition and alkaline phosphatase concentration; PAR1 also modulated osteogenic markers at the gene and protein levels. We further demonstrated that this effect was regulated by Wnt, TGF-βI, MEK, p38 MAPK, and FGF/VEGF signaling pathways in PDLSCs (p < 0.05%). Overall, PAR1 activation increased osteogenic activity in CSs, emerging as a promising scaffold-free therapeutic approach for periodontal regeneration.

Potential of Mesenchymal Stem Cell Sheets on Periodontal Regeneration: A Systematic Review of Pre-Clinical Studies.

Cell sheet technique using mesenchymal stem cells is a high-level strategy in periodontal regenerative medicine. Although recent studies have shown the role of MSCSs in increased dental supporting tissues and bone, there is no systematic review focused specifically on assessing periodontal regeneration in orthotopic animal models. To evaluate the potential of mesenchymal stem cell sheets (MSCSs) on periodontal regeneration, compared to control, in experimental animal models Methods: Pre-clinical studies in periodontal defects of animal models were considered eligible. The electronic search included the MEDLINE, Web of Science, EMBASE and LILACS databases. The review was conducted according to the Preferred Reporting Item for Systematic Reviews and Meta-Analyses statement guidelines. A total of 17 of the 3989 studies obtained from the electronic database search were included. MSCSs included dental follicle (DF) MSCSs, periodontal ligament (PL) MSCSs, dental pulp (DP) MSCSs, bone marrow (BM) MSCSs, alveolar periosteal (AP) MSCSs and gingival (G) MSCSs. Regarding cell sheet inducing protocol, most of the studies used ascorbic acid (52.94%). Others used culture dishes grafted with a temperature-responsive polymer (47.06%). Adverse effects were not identified in the majority of studies. Meta-analysis was not considered because of methodological heterogeneities. PDL-MSCSs were superior for periodontal regeneration enhancement compared to the control, but in an induced inflammatory microenvironment, DF-MSCSs were better. Moreover, DF-MSCSs, DP-MSCSs, and BM-MSCSs showed improved results compared to the control. MSCSs can improve periodontal regeneration in animal periodontal defect models.

The Progress of Stem Cell Therapy in Myocardial-Infarcted Heart Regeneration: Cell Sheet Technology.

Various tissues, including the heart, cornea, bone, esophagus, bladder and liver, have been vascularized using the cell sheet technique. It overcomes the limitations of existing techniques by allowing small layers of the cell sheet to generate capillaries on their own, and it can also be used to vascularize tissue-engineered transplants. Cell sheets eliminate the need for traditional tissue engineering procedures such as isolated cell injections and scaffold-based technologies, which have limited applicability. While cell sheet engineering can eliminate many of the drawbacks, there are still a few challenges that need to be addressed. The number of cell sheets that can be layered without triggering core ischemia or hypoxia is limited. Even when scaffold-based technologies are disregarded, strategies to tackle this problem remain a substantial impediment to the efficient regeneration of thick, living three-dimensional cell sheets. In this review, we summarize the cell sheet technology in myocardial infarcted tissue regeneration.

Zonal-Layered Chondrocyte Sheets for Repairment of Full-Thickness Articular Cartilage Defect: A Mini-Pig Model

The cell sheet technique is a promising approach for tissue engineering, and the present study is aimed to determine a better configuration of cell sheets for cartilage repair. For stratified chondrocyte sheets (S-CS), articular chondrocytes isolated from superficial, middle, and deep zones were stacked accordingly. Heterogeneous chondrocyte sheets (H-CS) were obtained by mixing zonal chondrocytes. The expressions of chondrocytes, cytokine markers, and glycosaminoglycan (GAG) production were assessed in an in vitro assay. The curative effect was investigated in an in vivo porcine osteochondral defect model. The S-CS showed a higher cell viability, proliferation rate, expression of chondrogenic markers, secretion of tissue inhibitor of metalloproteinase, and GAG production level than the H-CS group. The expressions of ECM destruction enzyme and proinflammatory cytokines were lower in the S-CS group. In the mini-pigs articular cartilage defect model, the S-CS group had a higher International Cartilage Repair Society (ICRS) macroscopic score and displayed a zonal structure that more closely resembled the native cartilage than those implanted with the H-CS. Our study demonstrated that the application of the S-CS increased the hyaline cartilage formation and improved the surgical outcome of chondrocyte implication, offering a better tissue engineering strategy for treating articular cartilage defects.

Improvement of the therapeutic capacity of insulin-producing cells trans-differentiated from human liver cells using engineered cell sheet

BackgroundAlthough pancreatic islet transplantation therapy is ideal for diabetes patients, several hurdles have prevented it from becoming a standard treatment, including donor shortage and low engraftment efficacy. In this study, we prepared insulin-producing cells trans-differentiated from adult human liver cells as a new islet source. Also, cell sheet formation could improve differentiation efficiency and graft survival.MethodsLiver cells were expanded in vitro and trans-differentiated to IPCs using adenovirus vectors carrying human genes for PDX1, NEUROD1, and MAFA. IPCs were seeded on temperature-responsive culture dishes to form cell sheets. Differentiation efficiency was confirmed by ß cell-specific gene expression, insulin production, and immunohistochemistry. IPC suspension was injected by portal vein (PV), and IPC sheet was transplanted on the liver surface of the diabetic nude mouse. The therapeutic effect of IPC sheet was evaluated by comparing blood glucose control, weight gain, histological evaluation, and hepatotoxicity with IPC injection group. Also, cell biodistribution was assessed by in vivo/ex vivo fluorescence image tagging.ResultsInsulin gene expression and protein production were significantly increased on IPC sheets compared with those in IPCs cultured on conventional culture dishes. Transplanted IPC sheets displayed significantly higher engraftment efficiency and fewer transplanted cells in other organs than injected IPCs, and also lower liver toxicity, improved blood glucose levels, and weight gain. Immunohistochemical analyses of liver tissue revealed positive staining for PDX1 and insulin at 1, 2, and 4 weeks after IPC transplantation.ConclusionsIn conclusion, cell sheet formation enhanced the differentiation function and maturation of IPCs in vitro. Additionally, parameters for clinical application such as distribution, therapeutic efficacy, and toxicity were favorable. The cell sheet technique may be used with IPCs derived from various cell sources in clinical applications.

Novel pre-vascularized tissue-engineered dermis based on stem cell sheet technique used for dermis-defect healing.

Insufficient donor dermis and the shortage of three-dimensional vascular networks are the main limitations in the tissue-engineered dermis (TED). To solve these problems, we initially constructed pre-vascularized bone marrow mesenchymal stem cell sheet (PBMCS) and pre-vascularized fibroblasts cell sheet (PFCS) by cell sheet technology, and then superimposed or folded them together to construct a pre-vascularized TED (PTED), aiming to mimic the real dermis structure. The constructed PTED was implanted in nude mice dorsal dermis-defect wound and the wound-healing effect was quantified at Days 1, 7 and 14 via the methods of histochemistry and immunohistochemistry. The results showed that PTED could rapidly promote the wound closure, especially at Day 14, and the wound-healing rate of three-layer PTED could reach 97.2% (P < 0.01), which was faster than the blank control group (89.1%), PBMCS (92.4%), PFCS (93.8%) and six-layer PTED (92.3%). In addition, the vessel density in the PTED group was higher than the other groups on the 14th day. Taken together, it is proved that the PTED, especially three-layer PTED, is more conducive to the full-thickness dermis-defect repair and the construction of the three-dimensional vascular networks, indicating its potential application in dermis-defect repair.

Osteogenic and angiogenic lineage differentiated adipose-derived stem cells for bone regeneration of calvarial defects in rabbits.

Cell sheet techniques are widely used in bone engineering. However, vascularization remains a challenge in fabricating vascularized engineered bone. The goal of this study was to induce adipose-derived stem cell (ADSC) osteogenic and angiogenic lineage differentiation and investigate the use of bidiretionally differentiated ADSCs for bone regeneration. ADSCs were cultured to form an osteogenic cell sheet. Other ADSCs were induced to differentiate into endothelial progenitor cells (EPCs), which were identified and characterized by morphological observation and CD31 immunofluorescent staining. Then, the ADSC sheet-EPC complexes were implanted subcutaneously into nude mice, while ADSC sheets alone were implanted as a control. After 8 weeks of transplantation, microcomputed tomography (micro-CT) and histological observation were used to assess bone formation. We then implanted the complexes in calvarial defects in rabbits and assessed bone repair by micro-CT and histological analysis. The ADSC sheets consisted of multiple layers of cells and extracellular matrix. The obtained EPCs formed capillary-like structures and expressed the specific antigen marker CD31. The osteogenic ADSC sheet-EPC complexes formed dense and well-vascularized new bone tissue at 8 weeks after implantation. Bone density was significantly lower in the control group than in the complex group (p < .05). In addition, the reconstruction of calvarial defects in rabbits in complex group was obviously greater than that in the control group (p < .05). These results suggested that the approach of engineering bone tissue with bidiretionally differentiated ADSCs enabled bone regeneration, thus offering a promising strategy for repairing bone defects.

Recent Advances in ROS-Responsive Cell Sheet Techniques for Tissue Engineering.

Cell sheet engineering has evolved rapidly in recent years as a new approach for cell-based therapy. Cell sheet harvest technology is important for producing viable, transplantable cell sheets and applying them to tissue engineering. To date, most cell sheet studies use thermo-responsive systems to detach cell sheets. However, other approaches have been reported. This review provides the progress in cell sheet detachment techniques, particularly reactive oxygen species (ROS)-responsive strategies. Therefore, we present a comprehensive introduction to ROS, their application in regenerative medicine, and considerations on how to use ROS in cell detachment. The review also discusses current limitations and challenges for clarifying the mechanism of the ROS-responsive cell sheet detachment.

Scaffold-Free 3-D Cell Sheet Technique Bridges the Gap between 2-D Cell Culture and Animal Models.

Various tissue engineering techniques have been created in research spanning two centuries, resulting in new opportunities for growing cells in culture and the creation of 3-D tissue-like constructs. These techniques are classified as scaffold-based and scaffold-free techniques. Cell sheet, as a scaffold-free technique, has attracted research interest in the context of drug discovery and tissue repair, because it provides more predictive data for in vivo testing. It is one of the most promising techniques and has the potential to treat degenerative tissues such as heart, kidneys, and liver. In this paper, we argue the advantages of cell sheets as a scaffold-free approach, compared to other techniques, including scaffold-based and scaffold-free techniques such as the classic systemic injection of cell suspension.

Hypoxic-conditioned cardiosphere-derived cell sheet transplantation for chronic myocardial infarction.

Cell therapy provides a suitable environment for regeneration through paracrine effects such as secretion of growth factors. Cardiosphere-derived cells (CDCs) have a high capacity for growth factor secretion and are an attractive target for clinical applications. In particular, a cell sheet technique was reported to have clinical advantages by covering a specific region. Here, we examined the effect of the hypoxic-conditioned (HC) autologous CDC sheet therapy on a rabbit chronic myocardial infarction model. CDC sheet function was assessed by the enzyme-linked immunosorbent assay and quantified by polymerase chain reaction in vitro (days 1-3 of conditioning). The rabbit chronic myocardial infarction model was established by left coronary ligation. Autologous CDCs were isolated from the left atrial specimen; CDC sheets with or without 2-day HC were transplanted onto the infarcted hearts at 4 weeks. The cardiac function was assessed by an echocardiography at 0, 4 and 8 weeks. A histological analysis of the host hearts was performed by tomato lectin staining at 8 weeks. The optimal HC duration was 48 h. HC significantly increased the mRNA expression levels of VEGF and ANG2 on day 2 compared to the normoxic-conditioned (NC) group. The HC group showed significant improvement in the left ventricular ejection fraction (64.4% vs 58.8% and 53.4% in the NC and control) and a greater lectin-positive area in the ischaemic region (HC:NC:control = 13:8:2). HC enhances the paracrine effect of a CDC sheet on angiogenesis to improve cardiac function in the chronic myocardial infarction model, which is essential for cardiomyocyte proliferation during cardiac regeneration.

Book-Shaped Acellular Fibrocartilage Scaffold with Cell-loading Capability and Chondrogenic Inducibility for Tissue-Engineered Fibrocartilage and Bone-Tendon Healing.

Functional fibrocartilage regeneration is a bottleneck during bone-tendon healing, and the currently available tissue-engineering strategies for fibrocartilage regeneration are insufficient because of a lack of appropriate scaffold that can load large seeding-cells and induce chondrogenesis of stem cells. The acellular fibrocartilage scaffold (AFS) contains active growth factors as well as tissue-specific epitopes for cell-matrix interactions, which make it a potential scaffold for tissue-engineered fibrocartilage. A limitation to this scaffold is that its low porosity inhibits cells loading and infiltration. Here, inspired by book appearance, we sectioned native fibrocartilage tissue (NFT) into book-shape to improve cells loading and infiltration, and then decellularized with four protocols: (1) 2% SDS for 6-h, (2) 2% SDS for 24-h, (3) 4 SDS for 6-h, (4) 4% SDS for 24-h, followed by nuclease digestion. The optimal protocol was screened with respect to microstructures, DNA residence, native ingredients reservation, and chondrogenic inducibility of the AFS. In vitro studies demonstrated that this screened scaffold is noncytotoxicity and low-immunogenicity, allows adipose-derived stromal cells (ASCs) attachment and proliferation, shows superior chondrogenic inducibility, and stimulates collagen or glycosaminoglycans secretion. The underlying mechanism for this chondrogenic inducibility may be related to hedgehog pathway activating. Additionally, a novel pattern for fabricating tissue-engineered fibrocartilage was developed to enlarge seeding-cells loading, namely, cell-sheets sandwiched by book-shaped scaffold. In-vivo studies indicate that this screened scaffold alone could induce endogenous cells to satisfactorily regenerate fibrocartilage at 16-week, as characterized by fibrocartilaginous extracellular matrix (ECM) deposition and good interface integration. Interleaving this book-shaped AFS with autologous ASCs-sheets significantly enhanced its ability to regenerate fibrocartilage. Cell tracking demonstrated that fibrochondrocytes, osteoblasts, and osteocytes in the healing interface at postoperative 8-week partly originated from the sandwiched ASCs-sheets. On that basis, we propose the use of this book-shaped AFS and cell sheet technique for fabricating tissue-engineered fibrocartilage to improve bone-tendon healing.

Construction of a Multilayered Mesenchymal Stem Cell Sheet with a 3D Dynamic Culture System.

Stem cell therapy shows a promising future in regenerating injured organ and tissues, and the cell sheet technique has been developed to improve the low cell retention and poor survival within the target zone. However, during the in vitro construction process, a solution for maintaining stem cell bioactivity and increasing the cell amount within the cell sheet is urgently needed. Here, this protocol presents a method for constructing a multilayered cell sheet with favorable stem cell bioactivity and optimal operability. Decellularized porcine pericardium (DPP) is prepared by phospholipase A2 (PLA2) decellularization method as the cell sheet scaffold, and rat bone marrow mesenchymal stem cells (BMSCs) are isolated and expanded as the seeded cells. The temporary multilayered cell sheet structure is constructed by using RAD16-I peptide hydrogel. Finally, the cell sheet is cultured with a dynamic perfusion system to stabilize the three-dimensional (3D) structure, and the cell sheet could be obtained following a 48-hour culture in vitro. This protocol provides an efficient and feasible method for constructing a multilayered stem cell sheet, and the cell sheet could be developed as a favorable stem cell therapy product in the future.

In Vivo Periodontium Formation Around Titanium Implants Using Periodontal Ligament Cell Sheet.

Osseointegrated implants have been recognized as being very reliable and having long-term predictability. However, host defense mechanisms against infection have been known to be impaired around a dental implant because of the lack of a periodontal ligament (PDL). The purpose of our experimental design was to produce cementum and PDL on the implant surface adopting cell sheet technology. To this aim we used PDL-derived cells, which contain multipotential stem cells, as the cell source and we cultured them on an implant material constituted of commercially pure titanium treated with acid etching, blasting, and a calcium phosphate (CaP) coating to improve cell attachment. Implants with adhered human PDL cell sheets were transplanted into bone defects in athymic rat femurs as a xenogeneic model. Implants with adhered canine PDL-derived cell sheets were transplanted into canine mandibular bone as an autologous model. We confirmed that PDL-derived cells cultured with osteoinductive medium had the ability to induce cementum formation. The attachment of PDL cells onto the titanium surface with three surface treatments was accelerated, compared with that onto the smooth titanium surface, at 40 min after starting incubation. Results in the rat model showed that cementum-like and PDL-like tissue was partly observed on the titanium surface with three surface treatments in combination with adherent PDL-derived cell sheets. On the other hand, osseointegration was observed on almost all areas of the smooth titanium surface that had PDL-derived cell sheets, but did not have the three surface treatments. In the canine model, histological observation indicated that formation of cementum-like and PDL-like tissue was induced on the titanium surface with surface treatments and that the PDL-like tissue was perpendicularly oriented between the titanium surface with cementum-like tissue and the bone. Results demonstrate that a periodontal-like structure was formed around a titanium implant, which is similar to the environment existing around a natural tooth. The clinical application of dental implants combined with a cell sheet technique may be feasible as an alternative implant therapy. Furthermore, application of this methodology may play an innovative role in the periodontal, prosthetic, and orthodontic fields in dentistry.

Preparation of high bioactivity multilayered bone-marrow mesenchymal stem cell sheets for myocardial infarction using a 3D-dynamic system

Cell sheet techniques offer a promising future for myocardial infarction (MI) therapy; however, insufficient nutrition supply remains the major limitation in maintaining stem cell bioactivity in vitro. In order to enhance cell sheet mechanical strength and bioactivity, a decellularized porcine pericardium (DPP) scaffold was prepared by the phospholipase A2 method, and aspartic acid was used as a spacer arm to improve the vascular endothelial growth factor crosslink efficiency on the DPP scaffold. Based on this scaffold, multilayered bone marrow mesenchymal stem cell sheets were rapidly constructed, using RAD16-I peptide hydrogel as a temporary 3D scaffold, and cell sheets were cultured in either the 3D-dynamic system (DCcs) or the traditional static condition (SCcs). The multilayered structure, stem cell bioactivity, and ultrastructure of DCcs and SCcs were assessed. The DCcs exhibited lower apoptosis, lower differentiation, and an improved paracrine effect after a 48 h culture in vitro compared to the SCcs. Four groups were set to evaluate the cell sheet effect in rat MI model: sham group, MI control group, DCcs group, and SCcs group. The DCcs group improved cardiac function and decreased the infarcted area compared to the MI control group, while no significant improvements were observed in the SCcs group. Improved cell survival, angiogenesis, and Sca-1+ cell and c-kit+ cell amounts were observed in the DCcs group. In conclusion, the DCcs maintained higher stem cell bioactivity by using the 3D-dynamic system to provide sufficient nutrition, and transplanting DCcs significantly improved the cardiac function and angiogenesis. Statement of SignificanceThis study provides an efficient method to prepare vascular endothelial growth factor covalent decellularized pericardium scaffold with aspartic acid, and a multilayered bone marrow mesenchymal stem cell (BMSC) sheet is constructed on it using a 3D-dynamic system. The dynamic nutrition supply showed a significant benefit on BMSC bioactivity in vitro, including decreasing cell apoptosis, reducing stem cell differentiation, and improving growth factor secretion. These favorable bioactivity improved BMSC survival, angiogenesis, and cardiac function of the infarcted myocardium. The study highlights the importance of dynamic nutrition supply on maintaining stem cell bioactivity within cell sheet, and it stresses the necessity and significance of setting a standard for assessing cell sheet products before transplantation in the future application.

Magnetically Controlled Growth-Factor-Immobilized Multilayer Cell Sheets for Complex Tissue Regeneration.

The scaffold-free cell-sheet technique plays a significant role in stem-cell-based regeneration. Furthermore, growth factors are known to direct stem cell differentiation and enhance tissue regeneration. However, the absence of an effective means to incorporate growth factors into the cell sheets hinders further optimization of the regeneration efficiency. Here, a novel design of magnetically controlled "growth-factor-immobilized cell sheets" is reported. A new Fe3 O4 magnetic nanoparticle (MNP) coated with nanoscale graphene oxide (nGO@Fe3 O4 ) is developed to label stem cells and deliver growth factors. First, the nGO@Fe3 O4 MNPs can be easily swallowed by dental-pulp stem cells (DPSCs) and have no influence on cell viability. Thus, the MNP-labeled cells can be organized via magnetic force to form multilayered cell sheets in different patterns. Second, compared to traditional Fe3 O4 nanoparticles, the graphene oxide coating provides plenty of carboxyl groups to bind and deliver growth factors. Therefore, with these nGO@Fe3 O4 MNPs, bone-morphogenetic-protein-2 (BMP2) is successfully incorporated into the DPSCs sheets to induce more bone formation. Furthermore, an integrated osteochondral complex is also constructed using a combination of DPSCs/TGFβ3 and DPSCs/BMP2. All these results demonstrate that the new cell-sheet tissue-engineering approach exhibits promising potential for future use in regenerative medicine.

The potential of cell sheet technique on the development of hepatocellular carcinoma in rat models.

BackgroundHepatocellular carcinoma (HCC) is considered the 3rd leading cause of death by cancer worldwide with the majority of patients were diagnosed in the late stages. Currently, there is no effective therapy. The selection of an animal model that mimics human cancer is essential for the identification of prognostic/predictive markers, candidate genes underlying cancer induction and the examination of factors that may influence the response of cancers to therapeutic agents and regimens. In this study, we developed a HCC nude rat models using cell sheet and examined the effect of human stromal cells (SCs) on the development of the HCC model and on different liver parameters such as albumin and urea.MethodsTransplanted cell sheet for HCC rat models was fabricated using thermo-responsive culture dishes. The effect of human umbilical cord mesenchymal stromal cells (UC-MSCs) and human bone marrow mesenchymal stromal cells (BM-MSCs) on the developed tumour was tested. Furthermore, development of tumour and detection of the liver parameter was studied. Additionally, angiogenesis assay was performed using Matrigel.ResultsHepG2 cells requires five days to form a complete cell sheet while HepG2 co-cultured with UC-MSCs or BM-MSCs took only three days. The tumour developed within 4 weeks after transplantation of the HCC sheet on the liver of nude rats. Both UC-MSCs and BM-MSCs improved the secretion of liver parameters by increasing the secretion of albumin and urea. Comparatively, the UC-MSCs were more effective than BM-MSCs, but unlike BM-MSCs, UC-MSCs prevented liver tumour formation and the tube formation of HCC.ConclusionsSince this is a novel study to induce liver tumour in rats using hepatocellular carcinoma sheet and stromal cells, the data obtained suggest that cell sheet is a fast and easy technique to develop HCC models as well as UC-MSCs have therapeutic potential for liver diseases. Additionally, the data procured indicates that stromal cells enhanced the fabrication of HepG2 cell sheets. This provides the foundation for future research using stromal cells in preclinical and clinical investigations.

Future Prospects for Human Tissue Engineered Urethra Transplantation: Decellularization and Recellularization-Based Urethra Regeneration.

To evaluate the histological characteristics of decellularized human urethra after transplantation into the rat omentum and compare in vivo cell seeding with perfusion-based and cell sheet urethral regeneration. Eight adult human male urethras accompanied with the surrounding corpus spongiosum were obtained. The tissues were decellularized with detergent-based method. The efficacy of decellularization and extracellular matrix preservation was evaluated by several techniques. Decellularized scaffolds were transplanted into the omentum of 12 male rats and located into the scrotum. Biopsies were taken 1, 3, and 6months postoperatively to assess the natural recellularization. Mesenchymal stem cells obtained from preputial tissue were seeded with perfusion-based and cell sheet techniques as well. Immunohistochemical staining with α-actin, cytokeratin AE1/AE3, synaptophysin, and CD31 antibodies were performed. Removal of nuclear components and preservation of biomechanical properties was confirmed. In-vivo recellularization revealed promising results in progressive angiogenesis and cell seeding of epithelium-like cells in the lining of the urethra as well as smooth muscle cells in the wall structure. In-vitro urethral regeneration revealed that cell sheet engineering was the technique of choice compared to perfusion-based technique. This study may paw the road for clinical application of acellular urethral matrix with the surrounding corpus spongiosum in urological reconstructive surgery.

Effect of Gelatin on Osteogenic Cell Sheet Formation Using Canine Adipose-Derived Mesenchymal Stem Cells

Osteogenically differentiated cell sheet techniques using mesenchymal stem cells (MSCs) are available to stimulate bone regeneration. The advantage of the cell sheet technique is delivering live cells effectively into the focal region. We developed a novel osteogenic cell sheet technique by adding gelatin to osteogenic cell medium. Gelatin-induced osteogenic cell sheets (GCSs) were compared to conventional osteogenic cell sheets (OCSs). Undifferentiated MSCs (UCs) were used as a control. The morphology of these cell sheets was evaluated microscopically and histologically. The time-dependent cell proliferation rate was estimated by DNA quantification. The expression of osteogenic gene markers and the number of calcium depositions were assessed by quantitative real-time polymerase chain reaction and Alizarin red S (ARS) staining, respectively. GCSs were thicker and stronger than OCSs. GCSs showed a significantly higher cell proliferation rate compared to OCSs (p < 0.05). GCSs exhibited significantly higher upregulation of BMP-7 mRNA compared to OCSs (p < 0.05). Both GCSs and OCSs showed negative ARS reactivity on day 10, but only GCSs showed positive ARS reactivity on day 21. With this technique, we observed active cell proliferation with abundant ECM and upregulation of osteogenic bone markers, and our results suggest that GCSs could be promising for therapeutic applications in bone regeneration.

Prefabrication of axially vascularized bone by combining β-tricalciumphosphate, arteriovenous loop, and cell sheet technique.

The repair of bone defects poses a great challenge for reconstructive surgeons. Although the development of tißsue engineering has exhibited promise in replacing damaged bone, the fabrication of large constructs with functional blood veßsels remains an obstacle. From the orthopedic surgeon's point of view, the generation of axially vascularized bone, which can anastomose with the recipient vessel, might be a solution to this medical problem. In this study, we aimed to prefabricate an axially vascularized bone by combining a ß-TCP scaffold, arteriovenous loop (AVL), and cell sheet in a bioreactor in vivo. Twelve rabbits were randomly allocated into two groups: the experimental group (presence of AVL) and the control group (absence of AVL). The constructs were explanted at 8 weeks postoperatively. The histomorphometric results showed 42.8±5.9% of the bone area in the AVL group and 26.6±3.5% in the control group. Similarly, vessel analysis revealed the average vessel density in the AVL group (12.5±3.3) was significantly more than that in the control group (6.1±1.5, p<0.05). Our research indicated that the combination of a ß-TCP scaffold, AVL and cell sheet might engineer vascularized bone. This prefabrication strategy might facilitate clinical translation of bone tissue engineering in reconstructing large bone defects.