Cell Separation Research Articles

Functional profiling of CHAP domain-containing peptidoglycan hydrolases of Staphylococcus aureus USA300 uncovers potential targets for anti-staphylococcal therapies

The bacterial pathogen Staphylococcus aureus employs a thick cell wall for protection against physical and chemical insults. This wall requires continuous maintenance to ensure strength and barrier integrity, but also to permit bacterial growth and division. The main cell wall component is peptidoglycan. Accordingly, the bacteria produce so-called peptidoglycan hydrolases (PGHs) that cleave glycan strands to facilitate growth, cell wall remodelling, separation of divided cells and release of exported proteins into the extracellular milieu. A special class of PGHs contains so-called ‘cysteine, histidine-dependent amidohydrolase/peptidase’ (CHAP) domains. In the present study, we profiled the roles of 11 CHAP PGHs encoded by the core genome of S. aureus USA300 LAC. Mutant strains lacking individual CHAP PGHs were analysed for growth, cell morphology, autolysis, and invasion and replication inside human lung epithelial cells. The results show that several investigated CHAP PGHs contribute to different extents to extracellular and intracellular growth and replication of S. aureus, septation of dividing cells, daughter cell separation once the division process is completed, autolysis and biofilm formation. In particular, the CHAP PGHs Sle1 and SAUSA300_2253 control intracellular staphylococcal replication and the resistance to β-lactam antibiotics like oxacillin. This makes the S. aureus PGHs in general, and the Sle1 and SAUSA300_2253 proteins in particular, attractive targets for future prophylactic or therapeutic anti-staphylococcal interventions. Alternatively, these cell surface-exposed enzymes, or particular domains of these enzymes, could be applied in innovative anti-staphylococcal therapies.

Suppressing the phase separation in FAMA mixed perovskite solar cells via the preloading of A site cations within the lattice

The incorporation of MA as a dopant is highly advantageous for stabilizing the lattice structure of α-phase FAPbI3. However, achieving a homogeneous phase mixing is only feasible at elevated MA doping levels, which significantly compromises both the efficiency and stability of FA-dominated perovskite solar cells (PSCs). In this study, it is found that in the nucleation stage of FAMA mixed perovskite, MA+ exhibit a significant kinetic advantage over FA+ in their reaction with PbI3−. The rapid crystallization of MAPbI3 not only induces FA-MA separation but also hinders the crystallization of perovskite due to strains induced by the bulky FA+ cations. To address this issue, we introduced FA0.8MA0.2PbI3 single crystals as the material source to prepare the precursor solutions, which achieved a delicate balance between lattice stability and bandgap (Eg = 1.54 eV). The preloaded A-site cations within the PbI3− cages make the bare FA-dominated perovskite films by blade coating maintain the phase stability in wild ambient for over one year. The final PSCs (0.09 cm2) achieved a highest power conversion efficiency (PCE) of 23.66 %, among the highest efficiency records for blade coated PSCs. The unpackaged PSCs show efficiency loss of < 10 % as being aged in air with a relative humidity of 10 % for over 1000 h.

Kilogram-scale production of strong and smart cellulosic fibers featuring unidirectional fibril alignment

ABSTRACT Multifunctional fibers with high mechanical strength enable advanced applications of smart textiles, robotics, and biomedicine. Herein, we reported a one-step degumming method to fabricate strong, stiff, and humidity-responsive smart cellulosic fibers from abundant natural grass. The facile process involves partially removing lignin and hemicellulose functioning as glue in grass, which leads to the separation of vessels, parenchymal cells, and cellulosic fibers, where cellulosic fibers are manufactured at kilogram scale. The resulting fibers show dense and unidirectional fibril structure at both micro- and nano-scales, which demonstrate high tensile strength of ∼0.9 GPa and Young's modulus of 72 GPa, being 13- and 14-times higher than original grass. Inspired by stretchable plant tendrils, we developed a humidity-responsive actuator by engineering cellulosic fibers into the spring-like structures, presenting superior response rate and lifting capability. These strong and smart cellulosic fibers can be manufactured at large scale with low cost, representing promising a fiber material derived from renewable and sustainable biomass.

Emerging strategies for the improvement of modifications in aqueous rechargeable zinc–iodine batteries: Cathode, anode, separator, and electrolyte

AbstractAqueous rechargeable zinc–iodine batteries have gained traction as a promising solution due to their suitable theoretical energy density, cost‐effectiveness, eco‐friendliness, and safety features. However, challenges such as the polyiodide shuttle effect, low iodine cathode conductivity, zinc anode dendritic growth, and the requirement for efficient separators and electrolytes hinder their commercial prospects. Hence, this review highlights recent progress in refining the core optimization strategies of zinc–iodine batteries, focusing on enhancements to the cathode, anode, separator, and electrolyte. Cathode improvements involve the addition of inorganic, organic, and hybrid materials to counteract the shuttle effect and boost redox kinetics, where these functional materials also are applied in anode modifications to curb dendritic growth and enhance cycling stability. Meanwhile, cell separator design approaches that effectively block polyiodide shuttle while promoting uniform zinc deposition are also discussed, while electrolyte innovations target zinc corrosion and polyiodide dissolution. Ultimately, the review aims to map out a strategy for developing zinc–iodine batteries that are efficient, safe, and economical, aligning with the demands of contemporary energy storage.

A numerical study of Elasto-inertial particle-focusing in straight and serpentine microchannels

Microfluidic devices have gained popularity in recent years due to their low cost and simplicity. Cell focusing linked with cell counting and cell separation used in clinical tests and point-of-care devices stands towards the top of every list of microfluidic applications. To focus and manipulate particles in a Newtonian medium, inertial microfluidics has been widely used. There is a requirement to replace a significantly more efficient approach given various particle-focusing positions near the channel walls recorded by inertial microfluidics. Here, the synergetic effect of elastic and inertial forces in relatively low-concentration viscoelastic fluids was investigated numerically. Utilizing particle-focusing behavior in straight and serpentine channels with different corner angles, by applying the numerical results obtained using the developed direct numerical simulation method (DNS) for elastic and inertial forces, we created a microchannel with a remarkable performance. As the flow regime transitions to elasto-inertial, where inertial forces are comparable to elastic forces in a straight microchannel, particles tend to concentrate at the channel centerline. As the flow rate increases, however, particle defocusing develops, and shear gradient lift forces ultimately overcome elastic forces in the channel's central region. Given that fluid flows at a higher velocity in the serpentine channel with a corner angle of 75° than in other channels, the Dean drag force induced by secondary flow serves to reduce particle defocusing rate at a given flow rate, making this channel a desirable platform for Elasto-inertial microfluidics. Particle focusing in a vertical direction was noticed as a benefit of elasto-inertial microfluidics, regardless of the geometry or flow rate of the particles passing through the channel. Finally, the impact of particle diameter on focusing behavior was studied. As particle diameter decreases, focusing width decreases and the focusing band shifts to the left side of the cross-section. We expect that the numerical evaluation of using viscoelastic medium in complex geometries can contribute to accelerate the three dimensional particle-focusing mechanism and enhance the efficiency of microdevices for cell and particle manipulation.

The Forkhead Box Gene, MaSep1, Negatively Regulates UV- and Thermo-Tolerances and Is Required for Microcycle Conidiation in Metarhizium acridum.

Insect pathogenic fungi have shown great potential in agricultural pest control. Conidiation is crucial for the survival of filamentous fungi, and dispersal occurs through two methods: normal conidiation, where conidia differentiate from mycelium, and microcycle conidiation, which involves conidial budding. The conidiation process is related to cell separation. The forkhead box gene Sep1 in Schizosaccharomyces pombe plays a crucial role in cell separation. Nevertheless, the function of Sep1 has not been clarified in filamentous fungi. Here, MaSep1, the homolog of Sep1 in Metarhizium acridum, was identified and subjected to functional analysis. The findings revealed that conidial germination of the MaSep1-deletion strain (ΔMaSep1) was accelerated and the time for 50% germination rate of conidial was shortened by 1 h, while the conidial production of ΔMaSep1 was considerably reduced. The resistances to heat shock and UV-B irradiation of ΔMaSep1 were enhanced, and the expression of some genes involved in DNA damage repair and heat shock response was significantly increased in ΔMaSep1. The disruption of MaSep1 had no effect on the virulence of M. acridum. Interestingly, ΔMaSep1 conducted the normal conidiation on the microcycle conidiation medium, SYA. Furthermore, 127 DEGs were identified by RNA-Seq between the wild-type and ΔMaSep1 strains during microcycle conidiation, proving that MaSep1 mediated the conidiation pattern shift by governing some genes associated with conidiation, cell division, and cell wall formation.

Optimization of pre-enrichment strategies for mouse hematopoietic stem cell isolation and metabolomic analysis

Blood cell production arises from the activity of hematopoietic stem cells (HSCs), defined by their self-renewal capacity and ability to give rise to all mature blood cell types. The mouse remains one of the most studied species in hematological research, and markers to define and isolate mouse HSCs are well-established. Given the very low frequency of HSCs in the bone marrow, stem cell pre-enrichment by red blood cell lysis and magnetic cell separation is often performed as part of the isolation process to reduce sorting times. Several pre-enrichment strategies are available, differing in their speed, degree of enrichment, final cell yield, and cost. In the current study, we performed a side-by-side comparison and provide a decision tree to help researchers select a pre-enrichment strategy for mouse HSC isolation depending on their downstream application. We then compared different pre-enrichment techniques in combination with metabolomics analysis of HSCs, where speed, yield and temperature during pre-enrichment are crucial factors, and found that the choice of pre-enrichment strategy significantly impacts the number of metabolites detected and levels of individual metabolites in HSCs.

CD19-chimeric antigen receptor-invariant natural killer T cells transactivate NK cells and reduce alloreactivity

Invariant natural killer T (iNKT) cells are a small fraction of T lymphocytes with strong cytotoxic and immunoregulatory properties. We previously showed that human culture-expanded iNKT cells prevent alloreactivity and lyse primary leukemia blasts. Here, iNKT cells have several advantages over T cells based on their immunoregulatory capabilities. Since chimeric antigen receptors (CARs) increase the benefit of immune effector cells, they play a crucial role in improvement of cytotoxic abilities of novel cellular therapeutics such as iNKT cells. In the present study, we investigated transactivation of NK cells and prevention of alloreactivity through iNKT cells transduced with a CD19-directed CAR. iNKT cells were isolated by magnetic cell separation from peripheral blood mononuclear cells and transduced with a CD19-CAR retrovirus. Transduction efficiency, purity and cell subsets were measured by flow cytometry. Transactivation and cytotoxicity assays have been established to investigate the ability of CD19-CAR-iNKT cells to transactivate primary NK cells. A mixed lymphocyte reaction (MLR) was performed to explore the inhibition of alloreactive CD3+ T cells by CD19-CAR-iNKT cells. CD19-CAR-iNKT cells are able to transactivate NK cells independent of cell contact: The expression of activation marker CD69 was significantly increased and also production of the proinflammatory cytokine interferon-gamma was higher in NK cells pretreated with CD19-CAR-iNKT cells. Consequently, the cytotoxic activity of such NK cells was significantly increased being able to lyse leukemia cells more effectively than without prior transactivation. Adding CD19-CAR-iNKT cells to an MLR resulted in a decreased expression of the T cell activation marker CD25 on alloreactive CD3+ T lymphocytes stimulated with HLA mismatched dendritic cells. Also, the proliferation of alloreactive CD3+ T lymphocytes was significantly reduced in this setting. We demonstrate that CD19-CAR-iNKT cells keep their immunoregulatory properties despite transduction with a CAR making them an attractive effector cell population for application after allogeneic hematopoietic cell transplantation. By transactivating NK cells, increasing their cytotoxic activity and suppressing alloreactive T cells, they might further improve outcomes through prevention of both relapse and graft-versus-host disease.

A drop-shaped deterministic lateral displacement microfluidic chip for accurate size-based circulating tumor cells separation

A drop-shaped deterministic lateral displacement microfluidic chip for accurate size-based circulating tumor cells separation

Fluorescent Nanowires from Dual‐State Emitting Fluorophores Directed by Molecular Motors and Aggregation‐Induced Emission: Produce Quantized Light Spectrum

AbstractLuminescent materials require systems that exhibit both dual‐state emission (DSE) and aggregation‐induced emission (AIE) to overcome the limitation of aggregation‐caused quenching (ACQ). Herein, a molecular assembler capable of crafting nanowires that exhibit programmable fluorescence across a broad spectrum of colors in a precisely quantized manner is reported. Because it is a starburst dendritic box made of PAMAM dendrimer (P), controller (C) molecules, and motor (M) molecules, the assembler is called PCM. Here, Nile red is chosen as C and placed into the hollow core of the dendrimer; a double ratchet motor (DRM) is chosen as M and is connected to the N‐terminals of the PAMAM dendrimer. While aqueous dispersed PCM assemblers have broad fluorescence bands beyond 300 nm, their crafted nanowires produce quantized cyan‐green, yellow, and orange‐red light emission in the spectra. These PCM assemblers are shown to hold long‐term memory, rapid switching, and energy harvesting by modulating photonic bandgaps, causing a longer redshift in the solid phase. The DSE of PCM can yield versatile photonics applications like bioimaging and energy harvesting. As PCM nanowires can modulate photonic bandgaps to cause a longer redshift, PCM fluorophores hold promise for drug delivery and cell separation like infrared‐sensitive operations.

Label-Free Single-Cell Cancer Classification from the Spatial Distribution of Adhesion Contact Kinetics.

There is an increasing need for simple-to-use, noninvasive, and rapid tools to identify and separate various cell types or subtypes at the single-cell level with sufficient throughput. Often, the selection of cells based on their direct biological activity would be advantageous. These steps are critical in immune therapy, regenerative medicine, cancer diagnostics, and effective treatment. Today, live cell selection procedures incorporate some kind of biomolecular labeling or other invasive measures, which may impact cellular functionality or cause damage to the cells. In this study, we first introduce a highly accurate single-cell segmentation methodology by combining the high spatial resolution of a phase-contrast microscope with the adhesion kinetic recording capability of a resonant waveguide grating (RWG) biosensor. We present a classification workflow that incorporates the semiautomatic separation and classification of single cells from the measurement data captured by an RWG-based biosensor for adhesion kinetics data and a phase-contrast microscope for highly accurate spatial resolution. The methodology was tested with one healthy and six cancer cell types recorded with two functionalized coatings. The data set contains over 5000 single-cell samples for each surface and over 12,000 samples in total. We compare and evaluate the classification using these two types of surfaces (fibronectin and noncoated) with different segmentation strategies and measurement timespans applied to our classifiers. The overall classification performance reached nearly 95% with the best models showing that our proof-of-concept methodology could be adapted for real-life automatic diagnostics use cases. The label-free measurement technique has no impact on cellular functionality, directly measures cellular activity, and can be easily tuned to a specific application by varying the sensor coating. These features make it suitable for applications requiring further processing of selected cells.

Organic solar cells: Exploring the future and sustainability of clean energy

As a critical technology in renewable energy, organic solar cells play an important role in energy transition and sustainable development. This paper examines the development and significance of organic solar cells in terms of energy demand, environmental requirements, and industrial growth. With the development of China's energy structure adjustment and carbon peak carbon neutral targets, interest in novel energy technologies is growing. The paper then describes the interaction between photons and materials and the electron-hole separation and charge transport mechanism of organic solar cells. In addition, the characteristics and potential applications of organic solar cells with various structures, such as bilayer heterojunction devices, intrinsic heterojunction devices, molecular DA junction devices, and stacked devices, are described in depth. In the outlook section, the paper emphasizes the future potential of organic solar cells, including efficiency enhancements, cost reductions, and integration with energy storage technologies. In conclusion, organic solar cells have tremendous potential in the field of renewable energy, and they are anticipated to lead the energy transition and contribute to sustainable development.

Research on the Method of Detecting TPN-Labeled Tumor Cells in Pleural Effusion Based on the Microfluidic Chip.

The clinical diagnosis of a malignant pleural effusion (MPE) is still based on the detection of tumor cells in the pleural effusion. The question of how to improve the efficiency and accuracy of detecting an MPE still remains. This study explores the use of microfluidic technology to concentrate cells in an MPE and achieved the detection of the cell marker TPN in the microarray capture area. TPN is a mitochondria-specific bio-probe that can identify tumor cells on the basis of differences in the mitochondrial potential. First, we designed a microfluidic chip to analyze its performance. The results show that when the total flow rate of the injected chip was 12 mL/h and the volume ratio of cell separation liquid to cell suspension was 1:1, the target cells (A549, MCF-7, and Hela) were enriched and the purity was improved to 98.7-99.3%. Finally, an MPE from cancer patients was used to detect the chip's ability to isolate and enrich tumor cells. Furthermore, the fluorescent identification of the TPN within the tumor cells was simultaneously achieved on the microfluidic chip. In conclusion, the potential to improve the efficiency of the clinical diagnosis of MPEs is provided by the chip structure and analysis conditions explored in this study.

Candida albicans Mannosidases, Dfg5 and Dcw1, Are Required for Cell Wall Integrity and Pathogenesis.

Candida albicans is an oral mucosal commensal fungus that transforms into an opportunistic pathogen under specific conditions, including immunosuppression. It causes oral and systemic candidiasis, which results in a significant health burden. Furthermore, an alarming rise in antifungal drug resistance in Candida species raises the urgent need for novel drugs and drug targets. C. albicans Dfg5 and Dcw1 are homologous cell wall alpha-1,6-mannosidases with critical functions and represent potential new drug targets. Our past studies have shown that Dfg5 and Dcw1 function in cell wall biogenesis through the cross-linking of glycoproteins into the cell wall, thus playing a key role in cell wall integrity. Additionally, Dfg5 and Dcw1 are required for hyphal morphogenesis. However, the exact functions of Dfg5 and Dcw1 in cell wall integrity, hyphal morphogenesis, and pathogenesis are not known. In this study, we determined the relation of Dfg5 and Dcw1 with Hog1 MAPK, which plays a key role in cell wall integrity via the regulation of chitin synthesis in C. albicans. Additionally, we also determined the effects of dfg5 and dcw1 mutations on the gene expression of transcriptional regulators of hyphal morphogenesis. Furthermore, we determined the effects of dfg5 and dcw1 mutations on pathogenesis in a mouse model of oral candidiasis. Our results demonstrate that dfg5 and dcw1 mutations, as well as a hog1 knockout mutation, result in the dysregulation of chitin synthesis, resulting in a cell separation defect. Heterozygous and conditional mutations in dfg5 and dcw1 resulted in decreased transcriptional levels of cst20, a positive regulator of hyphal morphogenesis. However, dfg5 and dcw1 mutations resulted in increased levels of all the five negative regulators of hyphal morphogenesis-Tup1, Nrg1, Mig1, Rbf1, and Rfg1. Additionally, Tup1 levels were significantly higher than other negative regulators, indicating that Dfg5 and Dcw1 function in hyphal morphogenesis by repressing Tup1. Finally, dfg5 and dcw1 mutations affected the ability of C. albicans to cause oral candidiasis in mice. Thus, the cell wall glycosidases Dfg5 and Dcw1 are required for virulence and pathogenesis and represent novel drug targets.

The single RRM domain-containing protein SARP1 is required for establishment of the separation zone in Arabidopsis.

Abscission is the shedding of plant organs in response to developmental and environmental cues. Abscission involves cell separation between two neighboring cell types, residuum cells (RECs) and secession cells (SECs) in the floral abscission zone (AZ) in Arabidopsis thaliana. However, the regulatory mechanisms behind the spatial determination that governs cell separation are largely unknown. The class I KNOTTED-like homeobox (KNOX) transcription factor BREVIPEDICELLUS (BP) negatively regulates AZ cell size and number in Arabidopsis. To identify new players participating in abscission, we performed a genetic screen by activation tagging a weak complementation line of bp-3. We identified the mutant ebp1 (enhancer of BP1) displaying delayed floral organ abscission. The ebp1 mutant showed a concaved surface in SECs and abnormally stacked cells on the top of RECs, in contrast to the precisely separated surface in the wild-type. Molecular and histological analyses revealed that the transcriptional programming during cell differentiation in the AZ is compromised in ebp1. The SECs of ebp1 have acquired REC-like properties, including cuticle formation and superoxide production. We show that SEPARATION AFFECTING RNA-BINDING PROTEIN1 (SARP1) is upregulated in ebp1 and plays a role in the establishment of the cell separation layer during floral organ abscission in Arabidopsis.

Lipoteichoic acid biosynthesis by Staphylococcus aureus is controlled by the MspA protein.

Staphylococcus aureus produces a plethora of virulence factors critical to its ability to establish an infection and cause disease. We have previously characterized a small membrane protein, MspA, which has pleiotropic effects on virulence and contributes to S. aureus pathogenicity in vivo. Here we report that mspA inactivation triggers overaccumulation of the essential cell wall component, lipoteichoic acid (LTA), which, in turn, decreases autolytic activity and leads to increased cell size due to a delay in cell separation. We show that MspA directly interacts with the enzymes involved in LTA biosynthesis (LtaA, LtaS, UgtP, and SpsB), interfering with their normal activities. MspA, in particular, interacts with the type I signal peptidase SpsB, limiting its cleavage of LtaS into its active form. These findings suggest that MspA contributes to maintaining a physiological level of LTA in the cell wall by interacting with and inhibiting the activity of SpsB, thereby uncovering a critical role for the MspA protein in regulating cell envelope biosynthesis and pathogenicity.IMPORTANCEThe S. aureus cell envelope, comprising the cytoplasmic membrane, a thick peptidoglycan layer, and the anionic polymers lipoteichoic acid and wall teichoic acids, is fundamental for bacterial growth and division, as well as being the main interface between the pathogen and the host. It has become increasingly apparent that the synthesis and turnover of cell envelope components also affect the virulence of S. aureus. In this study, we show that MspA, an effector of S. aureus virulence, contributes to the maintenance of normal levels of lipoteichoic acid in the cell wall, with implications on cell cycle and size. These findings further our understanding of the connections between envelope synthesis and pathogenicity and suggest that MspA represents a promising target for the development of future therapeutic strategies.

The Relationship between the Lifestyle of the Allogeneic Stem Cell Donors and the Number of Donated CD34+ and CD3+ Cells.

Background: Hematopoietic stem cell transplantation (HSCT) is considered as the last treatment option in many life-threatening diseases. The number of donated cells can affect transplantation success. This study attempted to investigate the relationship between the health-promoting lifestyle of allogeneic stem cell donors and the number of donated CD34+ and CD3+ cells. Materials and Methods: The study was a descriptive correlational study in which 100 peripheral blood stem cells donors participated. A demographic form and health-promoting lifestyle profile-II questionnaire were distributed to participants, and then cell separation was started. Afterward, the results of CD34 + and CD3 + cell counts, as well as other clinical parameters of the participants, were recorded. The collected data were analyzed by descriptive and analytical statistical methods. Results: The results showed that the mean total health-promoting lifestyle profile score for hematopoietic stem cell donors was 2.876±0.461. There was no significant relationship between the health- promoting lifestyle score and the number of CD34+, CD3+ cells and CD3+/CD34+ ratio. A positive and significant correlation was found between the weight of the donors and the number of CD34+ (P < 0.001) and CD3+ cells (P = 0.001). The number of CD34+ cells was significantly different between women and men (P = 0.009). Conclusion: Lifestyle had no significant effect on the number of CD3+/CD34+ cells. Moreover, the number of CD34+ cells was significantly higher in men, so males should be preferentially recruited as donors for the HSCT procedure.

An empirical analysis of hybrid MHD ferrofluid unsteady flow of two-dimensional heat transfer across a porous channel

This research investigates the heat transfer dynamics of a two-dimensional, incompressible, laminar, magnetohydrodynamics, time-dependent flow of a hybrid ferromagnetic fluid with radiation and irregular heat source/sink conditions through two porous channels. The study investigates the unique capability of ferromagnetic solid nanoparticles to improve the thermal efficiency of the host fluid, with potential applications in medicine such as drug targeting, cell separation, and magnetic resonance imaging. A mathematical model is developed as a nonlinear partial differential equation (PDE), which is subsequently converted into a nonlinear ordinary differential equation (ODE) using similarity transformations. The numerical solution is obtained using the 4th-order Runge-Kutta method implemented in Mathematica software. We analyze the impact of various nondimensional factors on the numerical results, including skin friction coefficient and Nusselt number, as well as graphical results depicting the velocity and temperature profiles of the hybrid ferrofluid. Boosting the film thickness parameter (λ) improves the heat transfer rate at the bottom of the porous channel. Raising the irregular heat source/sink parameters ( A * and B * ) and causing opposite impacts on the heat transfer rate at the bottom porous channel. Higher the radiation (R) values, the temperature profile behaves oppositely in both porous channels. The analysis reveals that the hybrid ferrofluid exhibits a higher rate of heat transfer compared to the ferrofluid.

A closer look at lithium-ion batteries in E-waste and the potential for a universal hydrometallurgical recycling process

The demand for lithium-ion batteries (LiBs) is rising, resulting in a growing need to recycle the critical raw materials (CRMs) which they contain. Typically, all spent LiBs from consumer electronics end up in a single waste stream that is processed to produce black mass (BM) for further recovery. It is desired to design a recycling process that can deal with a mixture of LiBs. Hence, this study investigates the structure and composition of battery modules in common appliances such as laptops, power banks, smart watches, wireless earphones and mobile phones. The battery cells in the module were disassembled into cell casing, cathode, anode and separator. Then, the cathode active materials (CAMs) were characterized in detail with XRD-, SEM-, EDX- and ICP-OES-analysis. No direct link was found between the chemistry of the active materials (NMC, LCO, LMO, LFP etc.) and the application. Various BM samples were submitted to a leaching procedure (2 M H2SO4, 50 °C, 2 h, 60 g BM/L) with varying concentration (0–4 vol%) of H2O2 to study the influence of their chemical composition on the dissolution of Li, Ni, Mn and Co. Only a part of the BMs dissolved completely at 4 vol% H2O2, which was attributed to the oxidation state of the transition metals (TMs). Exact determination of H2O2 consumption by redox titration confirmed this hypothesis.

The characteristics of autolysins associated with cell separation in Bacillus subtilis.

The peptidoglycan hydrolases responsible for the cell separation of Bacillus subtilis cells are collectively referred to as autolysins. However, the role of each autolysin in the cell separation of B. subtilis is not fully understood. In this study, we constructed a series of cell separation-associated autolysin deficient strains and strains overexpressing the transcription factors SlrR and SinR, and the morphological changes of these strains in liquid culture were observed. The results showed that the absence of D,L-endopeptidases CwlS and LytF only increased the cell chain length in the early exponential phase. The absence of D,L-endopeptidase LytE or N-acetylmuramyl-L-alanine amidase LytC can cause cells to form chains throughout the growth of B. subtilis, although the cell chain length was significantly shortened during the stationary phase. However, the absence of peptidoglycan N-acetylglucosaminidase LytD only caused minor defect in cell separation. Therefore, we concluded that LytE and LytC were the major autolysins that ensure the timely separation of B. subtilis daughter cells, whereas CwlS, LytF, and LytD were the minor autolysins. In addition, overexpression of the transcription factors SinR and SlrR in the cwlS lytF lytC lytE mutant enabled B. subtilis cells to form ultra-long chains in the vegetative phase, and its biomass level was basically the same as that of the wild type. This led to the conclusion that besides inhibiting the expression of lytC and lytF, the SinR-SlrR complex also has other potential mechanisms to inhibit cell separation.IMPORTANCEIn this study, the effects of CwlS, LytC, LytD, LytF, LytE, and SinR-SlrR complex on the cell separation of Bacillus subtilis at different growth phases were studied, and an ultra-long-chained B. subtilis strain was constructed. In microbial fermentation, due to its large cell size, this ultra-long-chained B. subtilis strain may be more likely to be precipitated or intercepted during the removal of bacterial process with centrifugation and membrane filtration as the main methods, which is crucial to improve the purity of the product.