Cell-binding Moiety Research Articles

Imaging of anthrax intoxication in mice reveals shared and individual functions of surface receptors CMG-2 and TEM-8 in cellular toxin entry

Bacillus anthracis lethal toxin and edema toxin are binary toxins that consist of a common cell-binding moiety, protective antigen (PA), and the enzymatic moieties, lethal factor (LF) and edema factor (EF). PA binds to either of two receptors, capillary morphogenesis protein-2 (CMG-2) or tumor endothelial marker-8 (TEM-8), which triggers the binding and cytoplasmic translocation of LF and EF. However, the distribution of functional TEM-8 and CMG-2 receptors during anthrax toxin intoxication in animals has not been fully elucidated. Herein, we describe an assay to image anthrax toxin intoxication in animals, and we use it to visualize TEM-8- and CMG-2-dependent intoxication in mice. Specifically, we generated a chimeric protein consisting of the N-terminal domain of LF fused to a nuclear localization signal-tagged Cre recombinase (LFn-NLS-Cre). When PA and LFn-NLS-Cre were coadministered to transgenic mice expressing a red fluorescent protein in the absence of Cre and a green fluorescent protein in the presence of Cre, intoxication could be visualized at single-cell resolution by confocal microscopy or flow cytometry. Using this assay, we found that: (a) CMG-2 is critical for intoxication in the liver and heart, (b) TEM-8 is required for intoxication in the kidney and spleen, (c) CMG-2 and TEM-8 are redundant for intoxication of some organs, (d) combined loss of CMG-2 and TEM-8 completely abolishes intoxication, and (e) CMG-2 is the dominant receptor on leukocytes. The novel assay will be useful for basic and clinical/translational studies of Bacillus anthracis infection and for clinical development of reengineered toxin variants for cancer treatment.

From Thermogelling Hydrogels toward Functional Bioinks: Controlled Modification and Cytocompatible Crosslinking.

Hydrogels are key components in bioink formulations to ensure printability and stability in biofabrication. In this study, a well-known Diels-Alder two-step post-polymerization modification approach is introduced into thermogelling diblock copolymers, comprising poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine). The diblock copolymers are partially hydrolyzed and subsequently modified by acid/amine coupling with furan and maleimide moieties. While the thermogelling and shear-thinning properties allow excellent printability, trigger-less cell-friendly Diels-Alder click-chemistry yields long-term shape-fidelity. The introduced platform enables easy incorporation of cell-binding moieties (RGD-peptide) for cellular interaction. The hydrogel is functionalized with RGD-peptides using thiol-maleimide chemistry and cell proliferation as well as morphology of fibroblasts seeded on top of the hydrogels confirm the cell adhesion facilitated by the peptides. Finally, bioink formulations are tested for biocompatibility by incorporating fibroblasts homogenously inside the polymer solution pre-printing. After the printing and crosslinking process good cytocompatibility is confirmed. The established bioink system combines a two-step approach by physical precursor gelation followed by an additional chemical stabilization, offering a broad versatility for further biomechanical adaptation or bioresponsive peptide modification.

Bio-plotted hydrogel scaffold with core and sheath strand-enhancing mechanical and biological properties for tissue regeneration

Three-dimensional bio-plotted scaffolds constructed from encapsulated biomaterials or so-called “bio-inks” have received much attention for tissue regeneration applications, as advances in this technology have enabled more precise control over the scaffold structure. As a base material of bio-ink, sodium alginate (SA) has been used extensively because it provides suitable biocompatibility and printability in terms of creating a biomimetic environment for cell growth, even though it has limited cell-binding moiety and relatively weak mechanical properties. To improve the mechanical and biological properties of SA, herein, we introduce a strategy using hydroxyapatite (HA) nanoparticles and a core/sheath plotting (CSP) process. By characterizing the rheological and chemical properties and printability of SA and SA/HA-blended inks, we successfully fabricated bio-scaffolds using CSP. In particular, the mechanical properties of the scaffold were enhanced with increasing concentrations of HA particles and SA hydrogel. Specifically, HA particles blended with the SA hydrogel of core strands enhanced the biological properties of the scaffold by supporting the sheath part of the strand encapsulating osteoblast-like cells. Based on these results, the proposed scaffold design shows great promise for bone-tissue regeneration and engineering applications.

Dianthin and Its Potential in Targeted Tumor Therapies.

Dianthin enzymes belong to ribosome-inactivating proteins (RIPs) of type 1, i.e., they only consist of a catalytic domain and do not have a cell binding moiety. Dianthin-30 is very similar to saporin-S3 and saporin-S6, two RIPs often used to design targeted toxins for tumor therapy and already tested in some clinical trials. Nevertheless, dianthin enzymes also exhibit differences to saporin with regard to structure, efficacy, toxicity, immunogenicity and production by heterologous expression. Some of the distinctions might make dianthin more suitable for targeted tumor therapies than other RIPs. The present review provides an overview of the history of dianthin discovery and illuminates its structure, function and role in targeted toxins. It further discusses the option to increase the efficacy of dianthin by endosomal escape enhancers.

The novel strategy for concurrent chemoradiotherapy by conjugating the apoptotic cell-binding moiety to caspase-3 activated doxorubicin prodrug

The selective targeting of cytotoxic agents to a tumor has shown limited success by difficulties in identifying the appropriate target molecules, and more importantly, by the phenotypically dynamic nature of the tumor cells and intratumoral heterogeneity. In an attempt to overcome these issues and efficiently deliver cytotoxic drugs to the tumor, we previously reported a strategy termed radiation-induced apoptosis-targeted chemotherapy (RIATC), which utilizes the radiotherapy for intentionally triggering the caspase-3 and in situ amplification of tumor apoptosis by caspase-3 activated prodrug. Herein, we propose an advanced form of RIATC prodrug, AP1-DEVD-S-DOX, that could more actively target to the ligands of radiation-induced tumor cells, which could accumulate more prodrugs, thereby allowing more effective in situ activation and amplification of tumor apoptosis, comparing to RIATC. Indeed, AP1-DEVD-S-DOX was able to exert improved doxorubicin (DOX) delivery to the tumor and anticancer effect than the RIATC prodrug that lacks apoptotic cell-binding property but having a similar degree of off-target distribution in the other organs. Accordingly, AP1-DEVD-S-DOX could be an efficient prodrug for concurrent chemoradiotherapy by selectively delivering doxorubicin to the tumor with less systemic cytotoxicity.

Functionalization of CoCr surfaces with cell adhesive peptides to promote HUVECs adhesion and proliferation

Biomimetic surface modification with peptides that have specific cell-binding moieties is a promising approach to improve endothelialization of metal-based stents. In this study, we functionalized CoCr surfaces with RGDS, REDV, YIGSR peptides and their combinations to promote endothelial cells (ECs) adhesion and proliferation. An extensive characterization of the functionalized surfaces was performed by XPS analysis, surface charge and quartz crystal microbalance with dissipation monitoring (QCM-D), which demonstrated the successful immobilization of the peptides to the surface. Cell studies demonstrated that the covalent functionalization of CoCr surfaces with an equimolar combination of RGDS and YIGSR represents the most powerful strategy to enhance the early stages of ECs adhesion and proliferation, indicating a positive synergistic effect between the two peptide motifs. Although these peptide sequences slightly increased smooth muscle cells (SMCs) adhesion, these values were ten times lower than those observed for ECs. The combination of RGDS with the REDV sequence did not show synergistic effects in promoting the adhesion or proliferation of ECs. The strategy presented in this study holds great potential to overcome clinical limitations of current metal stents by enhancing their capacity to support surface endothelialization.

Antigen-specific T cell Redirectors: a nanoparticle based approach for redirecting T cells.

Redirection of T cells to target and destroy tumors has become an important clinical tool and major area of research in tumor immunology. Here we present a novel, nanoparticle-based approach to selectively bind antigen-specific cytotoxic T cells (CTL) and redirect them to kill tumors, termed ATR (Antigen-specific T cell Redirectors). ATR were generated by decorating nanoparticles with both an antigen-specific T cell binding moiety, either peptide loaded MHC-Ig dimer or clonotypic anti-TCR antibody, and a model tumor cell binding moiety, anti-CD19 antibody to engage CD19+ tumor cells. ATR stably bind tumor cells and CTL in a dose dependent fashion and stimulate antigen-specific conjugate formation between those cells. ATR induced redirected lysis of tumor cells in vitro, as demonstrated by 51Cr-release killing. In vivo ATR administration led to reduced tumor growth in a SCID/beige human lymphoma treatment model. In summary, ATR represent a novel, nanoparticle based approach for redirecting antigen-specific CTL to kill tumors.

Multifunctional Coating Improves Cell Adhesion on Titanium by using Cooperatively Acting Peptides.

Promotion of cell adhesion on biomaterials is crucial for the long-term success of a titanium implant. Herein a novel concept is highlighted combining very stable and affine titanium surface adhesive properties with specific cell binding moieties in one molecule. A peptide containing L-3,4-dihydroxyphenylalanine was synthesized and affinity to titanium was investigated. Modification with a cyclic RGD peptide and a heparin binding peptide (HBP) was realized by an efficient on-resin combination of Diels-Alder reaction with inverse electron demand and Cu(I) catalyzed azide-alkyne cycloaddition. The peptide was fluorescently labeled by thiol Michael addition. Conjugating the cyclic RGD and HBP in one peptide gave improved spreading, proliferation, viability, and the formation of well-developed actin cytoskeleton and focal contacts of osteoblast-like cells.

Collagen-functionalised titanium surfaces for biological sealing of dental implants: Effect of immobilisation process on fibroblasts response

The clinical success of a dental implant requires not only an optimum osseointegration, but also the development of a biological sealing; i.e., a soft tissue seal around the transmucosal part of the implant. A promising approach to improve the biological seal of dental implants is the biomimetic modification of titanium surfaces with proteins or peptides that have specific cell-binding moieties. In this work we investigated the process of immobilising collagen on smooth and rough titanium surfaces and its effect on human dermal fibroblast (HDF) cell response. Titanium samples were activated by either oxygen plasma or acid etching to generate a smooth or nanorough surface, respectively. Subsequently, collagen grafting was achieved by either physisorption or covalent bonding through organosilane chemistry. The biofunctionalised titanium samples were then tested for stability and characterised by fluorescent labelling, wettability, OWLS and XPS studies. Biological characterisation was also performed through HDF adhesion, proliferation and gene expression. Covalent-bonded collagen showed higher stability than physisorbed collagen. A significant overexpression of the genes involved in fibroblast activation and extracellular matrix remodelling was observed in the collagen-coated surfaces. This effect was more pronounced on smooth than on rough surfaces. Immobilised collagen on the smooth plasma-treated surfaces favoured both fibroblast adhesion and activation. This study provides essential information for the design of implants with optimal biological sealing, a key aspect to avoid peri-implantitis and ensure long-lasting implant fixation.

Isolation and Characterisation of a Recombinant Antibody Fragment That Binds NCAM1-Expressing Intervertebral Disc Cells

Degeneration of the intervertebral discs (IVD) is a leading cause of neck and low back pain. Degeneration begins in the central nucleus pulposus region, leading to loss of IVD osmotic properties. Regeneration approaches include administration of matrix-mimicking scaffolds, cells and/or therapeutic factors. Cell-targeting strategies are likely to improve delivery due to the low cell numbers in the IVD. Single-chain antibody fragments (scFvs) that bind IVD cells were isolated for potential delivery of therapeutics to degenerated IVD. The most cell-distal domain of neural cell adhesion molecule 1 (NCAM1) was cloned and expressed in Escherichia coli. Phage display technology was used to isolate a human scFv against the recombinant domain by panning a scFv library on the immobilised protein. The isolated scFv bound cultured rat astrocytes, as well as bovine nucleus pulposus and annulus fibrosus cells in immunocytochemical studies. The scFv also labelled cells in bovine spinal cord and six-month and two-year old bovine IVD sections by immunohistochemistry. Antibody fragments can provide cell-binding moieties at improved cost, time, yield and functionalisation potential over whole antibodies. The described scFv has potential application in delivery of therapeutics to NCAM1-expressing cells in degenerated IVD.

Composite poly-l-lactic acid/poly-(α,β)-dl-aspartic acid/collagen nanofibrous scaffolds for dermal tissue regeneration

Tissue engineering scaffolds for skin tissue regeneration is an ever expounding area of research, as the products that meet the necessary requirements are far and elite. The nanofibrous poly-l-lactic acid/poly-(α,β)-dl-aspartic acid/Collagen (PLLA/PAA/Col I&III) scaffolds were fabricated by electrospinning and characterized by SEM, contact angle and FTIR analysis for skin tissue regeneration. The cell-scaffold interactions were analyzed by cell proliferation and their morphology observed in SEM. The results showed that the cell proliferation was significantly increased (p≤0.05) in PLLA/PAA/Col I&III scaffolds compared to PLLA and PLLA/PAA nanofibrous scaffolds. The abundance and accessibility of adipose derived stem cells (ADSCs) may prove to be novel cell therapeutics for dermal tissue regeneration. The differentiation of ADSCs was confirmed using collagen expression and their morphology by CMFDA dye extrusion technique. The current study focuses on the application of PLLA/PAA/Col I&III nanofibrous scaffolds for skin tissue engineering and their potential use as substrate for the culture and differentiation of ADSCs. The objective for inclusion of a novel cell binding moiety like PAA was to replace damaged extracellular matrix and to guide new cells directly into the wound bed with enhanced proliferation and overall organization. This combinatorial epitome of PLLA/PAA/Col I&III nanofibrous scaffold with stem cell therapy to induce the necessary paracrine signalling effect would favour faster regeneration of the damaged skin tissues.

Tumor Delivery of Ultrasound Contrast Agents Using Shiga Toxin B Subunit

The present study demonstrates the targeting of ultrasound contrast agents to human xenograft tumors by exploiting the overexpression of the glycolipid Gb3 in neovasculature. To this end, microbubbles were functionalized with a natural Gb3 ligand, the B subunit of the Shiga toxin (STxB). The targeting of Gb3-expressing tumor cells by STxB microbubbles was first shown by flow cytometry and fluorescence microscopy. A significantly higher proportion of STxB microbubbles were associated with Gb3-expressing tumor cells compared to cells in which Gb3 expression was inhibited. Moreover, ultrasonic imaging of culture plates showed a 12 dB contrast enhancement in average backscattered acoustic intensity on the surface of Gb3-expressing cells compared to Gb3-negative cells. Also, a 18 dB contrast enhancement was found in favor of STxB microbubbles compared to unspecific microbubbles. Microbubble signal intensity in subcutaneous tumors in mice was more than twice as high after the injection of STxB-functionalized microbubbles compared to the injection of unspecific microbubbles. These in vitro and in vivo experiments demonstrated that STxB-functionalized microbubbles bind specifically to cells expressing the Gb3 glycolipid. The cell-binding moieties of toxins thus appear as a new group of ligands for angiogenesis imaging with ultrasound.

Dissecting the urokinase activation pathway using urokinase-activated anthrax toxin.

Anthrax toxin is a three-part toxin secreted by Bacillus anthracis, consisting of protective antigen (PrAg), edema factor (EF), and lethal factor (LF). To intoxicate host mammalian cells, PrAg, the cell-binding moiety of the toxin, binds to cells and is then proteolytically activated by furin on the cell surface, resulting in the active heptameric form of PrAg. This heptamer serves as a protein-conducting channel that translocates EF and LF, the two enzymatic moieties of the toxin, into the cytosol of the cells where they exert cytotoxic effects. The anthrax toxin delivery system has been well characterized. The amino-terminal PrAg-binding domain of LF (residues 1-254, LFn) is sufficient to allow translocation of fused "passenger" polypeptides, such as the ADP-ribosylation domain of Pseudomonas exotoxin A, to the cytosol of the cells in a PrAg-dependent process. The protease specificity of the anthrax toxin delivery system can also be reengineered by replacing the furin cleavage target sequence of PrAg with other protease substrate sequences. PrAg-U2 is such a PrAg variant, one that is selectively activated by urokinase plasminogen activator (uPA). The uPA-dependent proteolytic activation of PrAg-U2 on the cell surface is readily detected by western blotting analysis of cell lysates in vitro, or cell or animal death in vivo. Here, we describe the use of PrAg-U2 as a molecular reporter tool to test the controversial question of what components are required for uPAR-mediated cell surface pro-uPA activation. The results demonstrate that both uPAR and plasminogen play critical roles in pro-uPA activation both in vitro and in vivo.

Adhesion of MC3T3‐E1 cells to bone sialoprotein and bone osteopontin specifically bound to collagen I

Bone sialoprotein (BSP) and bone osteopontin (OPN) are members of the SIBLING (small integrin-binding ligand, N-linked glycoproteins) family of proteins commonly found in mineralized tissues. Previously, OPN was shown to exhibit a preferential orientation for MC3T3-E1 cell adhesion when it was specifically bound to collagen. In this work, the orientation of BSP under similar circumstances is examined and compared with OPN. Radiolabeled adsorption isotherms were obtained for BSP bound to both tissue culture polystyrene (TCPS) and collagen-coated TCPS. The results show that collagen has the capacity to bind almost twice as much OPN under identical conditions. An in vitro MC3T3-E1 cell adhesion assay was then performed to compare the cell binding ability of BSP on either TCPS or collagen-coated TCPS with identical amounts of adsorbed protein. It was found that there is no significant difference in the cell binding ability of BSP on either of the substrates. For cell binding studies on collagen-coated TCPS, it was shown that there are a greater number of cells bound to substrates with adsorbed OPN as compared with BSP. The preferable orientation of OPN for cell binding coupled with the higher binding capability of collagen for OPN indicates that OPN is more important than BSP for osteoblast adhesion to the collagen matrix. In addition, a cell inhibition assay was performed to show that all of the cell binding that occurred throughout these studies was dependent upon integrin interactions with the RGD cell binding moiety.

Inhibition of mitogen-activated protein kinase signalling by Bacillus anthracis lethal toxin causes destabilization of interleukin-8 mRNA

Bacillus anthracis must overcome host innate immune defences to establish a systemic anthrax infection. This is facilitated in part by lethal toxin (LT), a secreted virulence factor that consists of a cell-binding moiety, protective antigen (PA), and an enzymatic moiety, lethal factor (LF). PA binds cells through protein receptors and mediates the delivery of LF to the cytosol. LF is a protease that cleaves amino-terminal fragments from mitogen-activated protein kinase kinases (MAPKKs), preventing phosphorylation of their downstream targets. Here we report that LT reduces the amount of interleukin (IL)-8 produced and secreted by human endothelial cells. The reduction of IL-8 levels by LT was not attributable to reduced expression from the IL-8 promoter, but resulted from destabilization of IL-8 mRNA. Destabilization by LT was mediated through the 3' untranslated region of the IL-8 transcript and could be mimicked by pharmacological inhibitors of MAPK pathways. LT diminished the induction of IL-8 mRNA and protein by lipopolysaccharide, indicating that the toxin can impair the ability of these cells to initiate an immune response. Destabilization of a cytokine transcript represents a new interference strategy used by either a bacterial or viral pathogen to reduce cytokine expression and may help B. anthracis to evade host immune defences.

Use of phage display and polyvalency to design inhibitors of protein-protein interactions.

We describe the synthesis of an inhibitor that interferes with critical protein-protein interactions occurring during the assembly of anthrax toxin. Using a phage display selection strategy, we isolated a peptide directed against the cell binding moiety of the toxin that was able to interfere with binding of the enzymatic moieties. Because the cell binding moiety of the toxin is a heptamer, the peptide can potentially bind up to seven equivalent sites. We synthesized a polyvalent molecule displaying multiple copies of this peptide and showed that it is a much more potent inhibitor than the free peptide. Because little structural knowledge of the interacting proteins was required to synthesize this inhibitor, we believe that this approach may prove useful in the design of inhibitors of protein-protein interactions in other systems.

Adenovirus stripping: a versatile method to generate adenovirus vectors with new cell target specificity

We developed a new type of adenovirus type 5 (Ad5)-derived vector with genetically modified fiber proteins whose knob domains could be stripped off due to the insertion of a single Factor Xa cleavage site in the fiber shaft, between a cellular ligand and the knob domain. This Ad vector did not require a specific cell line for propagation and could be grown in HEK-293 cells. Stripping off the knob domains removed the endogenous cell-binding moiety of Ad but retained the new cell ligand for retargeting purposes. As experimental models for cell ligands, we used two peptides with different sequence complexities: (i) the integrin-binding tripeptide RGD and (ii) a 58-residue oligopeptide termed affibody (Zwt). Zwt binds specifically to the human IgG1 Fc domain or to its Fc3(1) homolog. The modified fibers were efficiently encapsidated into virions, and the Factor Xa sites were fully accessible to proteolysis. In vitro binding assays using recombinant Fc3(1) protein and Ad5-mediated gene transduction of Fc3(1)-expressing cells demonstrated that the proteolytically deknobbed Ad5-Zwt vector was functional and specific for receptor targeting.