Catalytic Reaction Research Articles

Controllable Synthesis of Titanium Silicon Molecular Zeolite Nanosheet with Short b-Axis Thickness and Application in Oxidative Desulfurization.

Titanium silicon molecular zeolite (TS-1) plays an important role in catalytic reactions due to its unique nanostructure. The straight channel on TS-1 was parallel to the orientation of the short b-axis and directly exposed to the aperture of the 10-member ring with a diameter of 0.54 nm × 0.56 nm. This structure could effectively reduce the diffuse restriction of bulk organic compounds during the oxidative desulfurization process. As a kind of cationic polymer electrolyte, polydimethyldiallyl ammonium chloride (PDDA) contains continuous [C8H16N+Cl-] chain segments, in which the Cl- could function as an effective structure-directing agent in the synthesis of nanomaterials. The chain of PDDA could adequately interact with the [0 1 0] plane in the preparation process of zeolite, and then the TS-1 nanosheet with short b-axis thickness (6 nm) could be obtained. The pore structure of the TS-1 nanosheet is controlled by regulating the content of PDDA. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), N2 physical adsorption analysis, infrared absorption spectrum and ultraviolet-visible spectrum were used to determine the TS-1. The thinner nanosheets exhibit excellent catalytic performance in oxidative desulfurization of dibenzothiophene (DBT), in which the removal rate could remain at 100% after three recycles. Here, the TS-1 nanosheet with short b-axis thickness has a promising future in catalytic reactions.

Operando Spectroscopy to Understand Dynamic Structural Changes of Solid Catalysts.

Solid materials like heterogeneous catalysts are highly dynamic and continuously tend to change when exposed to the reaction environment. To understand the catalyst system under true reaction conditions,operando spectroscopy is the key to unravel small changes, which can ultimately lead to a significant difference in catalytic activity and selectivity. This was also the topic of the 7th International Congress on Operando Spectroscopy in Switzerland in 2023. In this article, we discuss various examples to introduce and demonstrate the importance of this area, including examples from emission control for clean air (e.g. CO oxidation), oxidation catalysis in the chemical industry (e.g. oxidation of isobutene), future power-to-X processes (electrocatalysis, CO2 hydrogenation to methanol), and non-oxidative conversion of methane. All of these processes are equally relevant to the chemical industry. Complementary operando techniques such as X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and Raman spectroscopy were utilized to derive the ultimate structure of the catalyst. The variety of conditions requires distinctly different operando cells that can reach a temperature range of 400-1000 °C and pressures up to 40 bar. The best compromise for both the spectroscopy and the catalytic reaction is needed. As an outlook, we highlight emerging methods such as modulation-excitation spectroscopy (MES) or quick-extended X-ray absorption fine structure (QEXAFS) and X-ray photon in/out techniques, which can provide better sensitivity or extend X-ray based operando studies.

Current Developments in Operando Electron Paramagnetic Resonance Spectroscopy.

Electron paramagnetic resonance (EPR) spectroscopy is a powerful tool for in situ/operando tracking of catalytic reactions that involve paramagnetic species either as a catalyst (e.g. transition metal ions or defects), reaction intermediates (radicals) or poisoning agents such as coke. This article provides a summary of recent experimental examples and developments in resonator design as well as detection schemes that were carried out in our group. Opportunities for applying this technique are illustrated by examples, including studies of transition metal exchanged zeolites and metal-free zeolites as well as metal oxide catalysts. The inherent limitations of EPR applied at high temperatures are discussed, as well as strategies in reducing or lifting these restrictions are evaluated and ideas for future improvements and methodologies are discussed.

In situ formation of inhibitor species through catalytic surface reactions during area-selective atomic layer deposition of TaN.

Small molecule inhibitors (SMIs) have been gaining attention in the field of area-selective atomic layer deposition (ALD) because they can be applied in the vapor-phase. A major challenge for SMIs is that vapor-phase application leads to a disordered inhibitor layer with lower coverage as compared to self-assembled monolayers, SAMs. A lower coverage of SMIs makes achieving high selectivity for area-selective ALD more challenging. To overcome this challenge, mechanistic understanding is required for the formation of SMI layers and the resulting precursor blocking. In this study, reflection adsorption infrared spectroscopy measurements are used to investigate the performance of aniline as an SMI. Our results show that aniline undergoes catalytic surface reactions, such as hydrogenolysis, on a Ru non-growth area at substrate temperatures above 250 °C. At these temperatures, a greatly improved selectivity is observed for area-selective TaN ALD using aniline as an inhibitor. The results suggest that catalytic surface reactions of the SMI play an important role in improving precursor blocking, likely through the formation of a more carbon-rich inhibitor layer. More prominently, catalytic surface reactions can provide a new strategy for forming inhibitor layers that are otherwise very challenging or impossible to form directly through vapor-phase application.

Backstepping synchronization control for four-dimensional chaotic system based on DNA strand displacement

Backstepping control is an important nonlinear control design method, which realizes the control of complex systems by constructing control law step by step, and has significant advantages for dealing with complex nonlinear systems. This article proposes a synchronization technique for four-dimensional chaotic systems using a combination of backstepping control method and DNA strand displacement technology. By relying on theoretical knowledge of DNA molecules, five basic chemical reaction modules such as trigger reaction, reference reaction, catalytic reaction, annihilation reaction and degradation reaction are given to construct a four-dimensional DNA chaotic system. On the basis of the relevant theory of chaotic dynamics, the constructed system is analyzed by Lyapunov exponent diagram and spectral entropy complexity algorithm, and the results come to the conclusion that the system reveals extremely complex and varied dynamic behaviors. Combining DNA strand displacement technology with backstepping control method, four controllers are developed to ensure that the trajectories of two homogeneous chaotic systems are synchronized. The numerical simulation results validate the feasibility and applicability of the proposed method. The method proposed in this paper may provide some references in the field of DNA molecular chaos synchronization control.

Furfural Hydrogenation Over Reduced Pure (LaBO3) and Substituted (LaB0.5B'0.5O3) (B, B': Fe, Co, Ni) Perovskites

AbstractA series of pure and 50 % substituted Fe‐containing (LaFeO3, LaFe0.5Ni0.5O3 and LaFe0.5Co0.5O3) and Co/Ni‐containing (LaCoO3, LaNiO3, and LaCo0.5Ni0.5O3) perovskites were used as precursors to synthesize metallic reduced catalysts to be tested for the liquid hydrogenation of furfural. The catalytic reaction was carried out in a batch reactor at 200 °C and 3.0 MPa of H2 pressure. The calcined perovskites and reduced catalysts were characterized by X‐ray diffraction (XRD), N2 physisorption at 77 K, temperature programmed reduction (H2‐TPR), temperature programmed CO2 and NH3 desorption (CO2‐TPD and NH3‐TPD), Atomic Absorption Spectroscopy (AAS) and X‐ray photoelectron spectroscopy (XPS) techniques. The LaCo0.5Ni0.5O3 reduced catalyst display the highest activity in furfural conversion, which was attributed to a cooperative effect between highly dispersed nickel and cobalt metal nanoparticles after reduction process. The effect of the nature of B‐cation have a high impact on the products selectivity in the hydrogenation of furfural, suggesting that enriched‐Ni metal surface was selectivity to tetrahydrofurfuryl alcohol, meanwhile enriched‐Co metal surface was selective to furfuryl alcohol formation, which was also supported with adsorption mode of furfural over the active sites obtained by quantum calculation.

Recent progress of waste plastic upcycling based on multifunctional zeolite catalysts

The chemical upcycling method is a promising strategy to alleviate the pollution problem of waste plastics by tapping into their intrinsic value and converting them into high value-added products. Zeolite-based catalysts are one of the surprising and efficient classes of thermocatalytic materials that have recently attracted considerable attention for waste plastic upcycling. They are designed for targeted applications with a wide range of adjustable acidic sites, multiple pore structures, and synergistic interactions with surface metals. In this review, we categorize plastics being converted into different high-value products and introduce the role of zeolite-based catalysts in the thermal upcycling of plastics. The structure-performance relationships of zeolite-based catalysts in catalytic reactions are discussed in depth. Finally, the future development of these multifunctional catalysts applied to the upcycling of plastics is outlined.

Predicting and probing the local temperature rise around plasmonic core-shell nanoparticles to study thermally activated processes.

Ultrafast spectroscopy can be used to study dynamic processes on femtosecond to nanosecond timescales, but is typically used for photoinduced processes. Several materials can induce ultrafast temperature rises upon absorption of femtosecond laser pulses, in principle allowing to study thermally activated processes, such as (catalytic) reactions, phase transitions, and conformational changes. Gold-silica core-shell nanoparticles are particularly interesting for this, as they can be used in a wide range of media and are chemically inert. Here we computationally model the temporal and spatial temperature profiles of gold nanoparticles with and without silica shell in liquid and gas media. Fast rises in temperature within tens of picoseconds are always observed. This is fast enough to study many of the aforementioned processes. We also validate our results experimentally using a poly(urethane-urea) exhibiting a temperature-dependent hydrogen bonding network, which shows local temperatures above 90 ◦C are reached on this timescale. Moreover, this experimentally shows the hydrogen bond breaking in such polymers occurs within tens of picoseconds.

TEMPO immobilized polymeric Janus dumbbell: Assembly and catalysis at liquid-liquid interface

Pickering interfacial catalysts (PICs) have emerged as a promising solution for simultaneously enhancing and catalyzing liquid-liquid biphasic reactions. In this study, we successfully synthesized dumbbell-shaped Janus structured polymeric nanoparticles with one side anchored imidazolium-TEMPO (im-C4-TEMPO@JPP) as Pickering interfacial catalyst for the oxidation of alcohols using the Anelli-Montanari reaction system. In the Pickering emulsion system, the im-C4-TEMPO@JPPs particles are assembled at the W/O interface due to the hydrophilicity of imidazolium-TEMPO anchored lobe which enables excellent amphiphilic character of the polymeric Janus dumbbell. Moreover, the im-C4-TEMPO@JPPs particles reduce the interfacial tension from 27.82 to 18.43 mN/m. This excellent interfacial adsorption capacity of im-C4-TEMPO@JPPs strongly stabilizes the water/dichloromethane Pickering emulsion over two months (emulsion volume fraction >90 %), thus providing an efficient reaction platform for liquid-liquid biphasic reactions. As a result, the constructed Pickering emulsion system efficiently catalyzes the oxidation of cinnamyl alcohol to cinnamaldehyde under static conditions. After 1 hour of reaction, the conversion of cinnamyl alcohol achieved 97.1 % with a selectivity of 99 %, nearly the same level relative to stirring intensified biphasic reaction. Hence, this novel PIC effectively improves the efficiency and sustainability of liquid-liquid biphasic catalytic reactions.

Synergistic role of MoS2 in gelation-induced fabrication of graphene oxide films.

Supporting materials for electrocatalysts must exhibit relative chemical inertness to facilitate unimpeded movement of gas, and demonstrate electrical conductivity to promote efficient electron transfer to the catalyst. Conventional catalyst electrodes, such as glassy carbon, carbon cloths, or Ni foam, are commonly employed. However, the challenge lies in the limited stability observed during testing due to the relatively weak adhesion between the catalyst and the electrode. Addressing this limitation is crucial for advancing the stability and performance of catalyst-electrode systems in various applications. Here, we suggest a novel fabrication method for a freestanding conducting film, accomplished through gelation, incorporating 1T-MoS2 and graphene oxide. 1T-MoS2 nanosheets play a crucial role in promoting the reduction of graphene oxide (GO) on the Zn foil. This contribution leads to accelerated film formation and enhanced electrical conductivity in the film. The synergistic effect also enhances the film's stability as catalyst supports. This study provides insights into the effective utilization of MoS2 and graphene oxide in the creating of advanced catalyst support systems with potential applications in diverse catalytic reaction.

Simulation analysis of micro-explosion during emulsification feeding of residue fluidized catalytic cracking

Residue Fluidized Catalytic Cracking (RFCC) is one of the key processes to convert heavy oil into light products in refineries. The fast and sufficient vaporization of the feedstock in the FCC riser reactor can promote the catalytic cracking reaction and is beneficial for increasing the yield of light products and decreasing the yield of coke. However, fast vaporization of residue oil is extremely challenging due to its high density and viscosity. Recently, emulsified feeding technology is seen as a potential method that can effectively enhance the vaporization of RFCC feedstock. Computational Fluid Dynamics (CFD) simulations were performed in order to reveal the micro-explosion mechanism of emulsion droplet in the riser reactor. The CFD model was validated against experimental results from literature. The model was used to study micro-explosion of emulsified droplets in the gas phase and at the catalyst particle surface separately. It was found that due to the micro-explosion of emulsion oil droplets in producing large number of tiny droplets, the secondary atomization of droplets can be realized. In the gas phase, the interfacial area of emulsion droplet can be improved by 5 to 15 times. At the catalyst surface, the percentage of liquid film coverage was reduced by 32.6 %, and the droplet diameter was reduced by 92 % for the emulsified feeding technology. These results indicate that the vaporization efficiency of the residual oil can be greatly improved by this technology.

Photocatalytic water oxidation by iron and copper phthalocyanine complexes immobilized on Fe3O4@SiO2@TiO2 under visible light irradiation

In this research, the heterogeneous catalysts of Fe3O4@SiO@TiO‐FePc and Fe3O4@SiO@TiO‐ CuPcN (FePc = iron (II) phthalocyanine and CuPcN = copper (II) tetraazaphthalocyanine), termed respectively as nanocomposites 1 and 2, were prepared by immobilizing the FePc and CuPcN complexes on the Fe3O4@SiO@TiO surface and used for the photocatalytic water oxidation reaction. Since phthalocyanine complexes have received very little attention as photocatalysts for water oxidation, the advantage of the synthesized photocatalyst owes to the ability of the phthalocyanine complex grafted on the titanium substrate to oxidize water in the photocatalytic reaction. The prepared nanocomposites were then studied by diffraction (XRD), scanning electron microscopy (SEM), energy‐dispersive X‐ray (EDX), Fourier transform infrared (FT‐IR) spectroscopies, thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), inductively coupled plasma‐optical emission spectroscopy (ICP‐OES), Brunauer–Emmett–Teller (BET) analysis, ultraviolet diffuse reflectance (DRS), and photoluminescence (PL) spectroscopies. The photocatalytic response of water oxidation by nanocomposites 1 and 2 was investigated in the presence of silver nitrate as an electron recipient at ambient temperature. The progress of the water oxidation reaction was monitored with an oxygen meter. The amount of oxygen generated in the presence of nanocomposites 1 and 2 under visible light irradiation was found to be 2.6 and 2.1 mg L−1, respectively. Owing to the existence of magnetic material, these nanocomposites can be effortlessly removed from the response medium with an external magnet. The involved nanocomposites can be used up to three times in catalytic water oxidation reactions with no significant change in their photocatalytic activity.

Solid-State Oxidation of Alcohols in Gold-Coated Milling Vessels via Direct Mechanocatalysis.

This paper presents a novel approach for the selective oxidation of alcohols to their corresponding aldehydes through direct mechanocatalysis, employing a gold-coated milling vessel as catalyst and air as the oxidation agent. By adjusting milling frequency, media, and duration, high catalytic efficiencies and selectivities are achieved. Remarkably, yields of up to 99% are obtained for specific substrates, with a turnover number (TON) of 8200 and a turnover frequency (TOF) of 0.77 s-1, surpassing existing alternatives. Confirmation of the catalytic reaction indeed occurring on the milling tool surface was achieved through X-ray photoelectron spectroscopy (XPS).

Novel hydrogel pillar array based ratiometric multicolor fluorescence biosensor for visual detection of alkaline phosphatase activity

Enzyme-induced in-situ fluorescence is crucial for the development of biosensing mechanisms and correlative spectroscopic analysis. Inspired by simple p-aminophenol (AP)-controlled synthesis and the specific catalytic reaction of 4-aminophenyl phosphate (APP) triggered by alkaline phosphatase (ALP), our research proposed a strategy to prepare carbon dots (CDs) as fluorescent signals for ALP detection using AP and 3-aminopropyltrimethoxysilane (APTMS) as the precursors. The further constructed ratiometric fluorescence sensor reduced the detection limit of ALP to 0.075 μU/mL by a significant margin. Considering the need for point-of-care testing (POCT), we chose agarose for the preparation of portable hydrogel sensors so that even untrained personnel can quickly achieve semi-quantitative visual detection of ALP using colorimetric cards. These results demonstrate the practical applicability of ratiometric fluorescence sensing hydrogel pillar arrays, which are important for high-sensitivity, visualization, and portable rapid enzyme activity assays.

Solid‐State Oxidation of Alcohols in Gold‐Coated Milling Vessels via Direct Mechanocatalysis

This paper presents a novel approach for the selective oxidation of alcohols to their corresponding aldehydes through direct mechanocatalysis, employing a gold‐coated milling vessel as catalyst and air as the oxidation agent. By adjusting milling frequency, media, and duration, high catalytic efficiencies and selectivities are achieved. Remarkably, yields of up to 99% are obtained for specific substrates, with a turnover number (TON) of 8200 and a turnover frequency (TOF) of 0.77 s‐1, surpassing existing alternatives. Confirmation of the catalytic reaction indeed occurring on the milling tool surface was achieved through X‐ray photoelectron spectroscopy (XPS).

Mesoporous SnO2-modified electrode for electrochemical detection of luteolin

Conventional methods like chromatography and spectroscopic analysis have limitations in detecting luteolin. However, electrochemical detection shows promise for reliable analysis. In this study, we compared two different morphologies of SnO2 with the same crystal structure for luteolin detection and found that crystal morphology significantly impacts the catalytic reaction. Compared to SnO2 quantum dots (SnO2 QDs), mesoporous SnO2 (m-SnO2) exhibited a larger specific surface area, providing more active sites for oxidation and reduction reactions. Moreover, m-SnO2 had lower impedance, effectively accelerating charge transfer at the electrode surface. Based on these excellent characteristics, m-SnO2/GCE modified electrode demonstrated outstanding performance in detecting luteolin, achieving a sensitivity of 8.5 μA μM-1, a low limit of 0.19 nM and a wide linear range from 0.5 nM to 1,400 nM. Besides, the m-SnO2/GC electrode displayed excellent consistency, reproducibility, durability, repeatability and specificity. Even three-week exposure to atmospheric conditions, the DPV signal stood at 94.1 % of its original peak current. Those enables its excellent application in practical sample detection. This research enhances our understanding of the influence of material structure and interface on catalytic luteolin detection, providing a theoretical foundation for accurate detection in complex systems. These findings should contribute to the development of more efficient, sensitive, and reliable luteolin sensors.

Coupling of modulating d-band center and optimizing interface electronic structure via MXene and Bi-metal doping in CoP achieving efficient bifunctional catalytic activity for water splitting

Bifunctional electrocatalysts that exhibit excellent catalytic activity for both hydrogen (HER) and oxygen evolution reactions (OER) are ideal for alkaline overall water splitting. The unique structure and diverse composition of cobalt phosphide catalysts are highly favorable for enhancing catalytic reaction kinetics. However, cobalt phosphide electrocatalysts typically exhibit insufficient OER activity. To overcome this text, we synthesized a Ru and V co-doped CoP-coupled highly conductive MXene catalyst with nano-arrays by in-situ growth on the surface of carbon cloth. The HER and OER overpotentials of the catalyst at 10 mA cm−2 current density were 30 and 206 mV, respectively. Furthermore, a series of physicochemical characterizations and first-principles calculations demonstrated that the increased HER and OER activities resulted from the synergistic effect established by the double doping and heterostructure. This effect produced an effective modulation of the d-band center of the catalysts, promoting adsorption effects on the intermediates. In conclusion, this work presents a novel approach to improving the electrocatalytic activity of phosphides and provides a faster and more environmentally friendly method for separating hydrogen from water.

Co@CoO chiral nanostructures enabling efficient oxygen electrocatalysis by modulated spin-polarization

The sluggish kinetics of the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) frequently hinder advances in Zn-air battery-dependent technologies. In this study, the chiral-induced spin selectivity (CISS) effect was employed to achieve spin alignment, resulting in a reduction in the reaction overpotential for chiral nanocatalysts compared to their compositionally similar achiral counterparts. Moreover, we demonstrated that chiral L-type Co@CoO catalysts (Co@CoO-L) could achieve outstanding oxygen electrocatalytic performances, overcoming thermodynamic limitations, by manipulating the spin alignment of the reaction intermediates during the catalytic reaction. Zn-air batteries assembled with Co@CoO-L exhibited excellent performances, including a high specific capacity (839.5 mA h g−1 @ 10 mA cm−2), large open-circuit voltage (1.47 V), and long-term cycling stability (800 h). This work provides new insights into the construction excellent catalysts by exploiting chiral-induced spin selectivity.

Based ATP-gating mechanism for detection of alkaline phosphatase in single-glass micropipettes functionalized by three-dimensional DNA network.

The construction of gating system in artificial channels is a cutting-edge research direction in understanding biological process and application sensing. Here, by mimicking the gating system, we report a device that easily synthesized single-glass micropipettes functionalized by three-dimensional (3D) DNA network, which triggers the gating mechanism for the detection of biomolecules. Based on this strategy, the gating mechanism shows that single-glass micropipette assembled 3D DNA network is in the "OFF" state, and after collapsing in the presence of ATP, they are in the "ON" state, at which point they exhibit asymmetric response times. In the "ON" process of the gating mechanism, the ascorbic acid phosphate (AAP) can be encapsulated by a 3D DNA network and released in the presence of adenosine triphosphate (ATP), which initiates a catalyzed cascade reaction under the influence of alkaline phosphatase (ALP). Ultimately, the detection of ALP can be responded to form the fluorescence signal generated by terephthalic acid that has captured hydroxyl radicals, which has a detection range of 0-250mU/mL and a limit of detection of 50mU/mL. This work provides a brand-new way and application direction for research of gating mechanism.

Molecular Electrocatalysis under Finite Diffusive Mass Transport Conditions. An Analytical Approach

AbstractMolecular electrocatalysis has emerged as a crucial branch of molecular electrochemistry, finding applications across various fields such as energy generation, electroanalysis, and electrosynthesis. In recent years, the study of these processes within confined spatial domains, has been increasingly frequent. However, a significant gap exists in the theoretical understanding of the interplay between different kinetics (redox and chemical) and mass transport under these conditions, and how their combined effects influence the electrochemical response. As a first step to address the aforementioned gap, this manuscript presents a theoretical expression for the current‐potential‐time response of a catalytic reaction occurring under finite diffusive conditions. The results indicate that, when the chemical kinetics is not fast, there are significant differences in electrochemical responses due to mass transport influences. Thus, in the case of bounded finite diffusion, a loss of efficiency in the process is observed, resulting in lower currents compared to those corresponding to semi‐infinite diffusive conditions. The validity of well‐known methods, such as the analysis of the current plateau or the foot of the wave under stationary conditions, is discussed. Experimental validation of these results is also provided through the study of the oxidation of Solketal mediated by the oxidation of TEMPO radical.