Catalytic Properties Research Articles

An Exceptional Valorization of CuO Nanoparticles in Ionic Liquids as an Efficient Medium for the Electrophilic Substitution of Indole Towards the Formation of Bis(indolyl)methanes

Aim: Ionic liquids are promising green solvents with simple but unique structure-related physical properties such as negligible vapour pressure, exceptional thermal conductivity, remarkable thermal stability and their suitability and inertness towards a broad range of catalytic applications. CuO NPs have been addressed as a cost-effective and a reagent of a choice that necessitates only mild reaction conditions to offer a high yield of the desired products with exceptional selectivity in a short duration of time. Therefore, in the present work, attempts have been made to explore the catalytic potentials of CuO NPs in an ionic liquid medium to synthesize biologically important bis(indolyl)methanes. Background: Catalytic explorations of metal oxide nanoparticles in ionic liquids offers a cooperative effect that has a significant impact on the kinetics as well as on the outcome of the reaction. Therefore, such catalytic systems in the present times have seized the scientific community's interest from the perspectives of sustainable development in synthetic organic chemistry. The combination of metal oxide nanoparticles with highly tunable ionic liquids is not only used to synthesize simple organic molecules but also explored in the synthesis of complex organic molecules of high commercial and biological relevance. Objectives: The current work offers a rapid and robust protocol for synthesizing bis(indolyl)methanes via electrophilic substitution reaction between indole and various aldehydes in the presence of a CuO nanoparticles-ionic liquid system. The discussion focuses on the high tolerance of different functionalities by the catalytic system leading to the synthesis of bis(indolyl)methanes. Methods: CuO NPs have been synthesized via the co-precipitation method using ionic liquid. The applicability of metal oxide nanoparticles-IL matrix was further investigated in synthesizing bis(indolyl)methanes. Results: The FT-IR absorption below 600 cm-1 and the XRD pattern showing all the peaks in the diffraction diagram revealed the formation of CuO NPs. FESEM images show the flake-shaped morphology of CuO NPs and are found to be separated from the agglomerated clusters Conclusion: Ionic liquid-CuO NPs matrix reveals good to exceptional catalytic properties, and their advancements as a catalytic system at room temperature open new avenues for synthetic organic chemists.

Effect of temperature on polaronic transport in CeO2 thin-film.

The outstanding catalytic property of cerium oxide (CeO2) strongly depends on the polaron formation due to the oxygen vacancy (V̈O) defect and Ce4+ to Ce3+ transformation. Temperature plays an important role in the case of polaron generation in CeO2 and highly influences its electrical transport properties. Therefore, a much needed attention is required for detailed understanding of the effect of temperature on polaron formation and oxygen vacancy migration to get an idea about the improvement in the redox property of ceria. In this work, we have probed the generation of polarons in CeO2 thin-film deposited on a silicon (Si) substrate using the resonance photoemission spectroscopy (RPES) study. The RPES data show an increase in polaron density at the substrate-film interface of the thermally annealed film, indicating the formation of an interfacial Ce2O3 layer, which is, indeed, a phase change from the cubic to hexagonal structure. This leads to a modified electronic band structure, which has an impact on the capacitance-voltage (C-V) characteristics. This result nicely correlates the microscopic property of polarons and the macroscopic transport property of ceria.

Self-assembled ordered AuNRs-modified electrodes for simultaneous determination of dopamine and topotecan with improved data reproducibility.

Gold nanomaterials have been widely explored in electrochemical sensors due to their high catalytic property and good stability in multi-medium. In this paper, the reproducibility of the signal among batches of gold nanorods (AuNRs)-modified electrodes was investigated to improve the data stabilization and repeatability. Ordered and random self-assembled AuNRs-modified electrodes were used as electrochemical sensors for the simultaneous determination of dopamine (DA) and topotecan (TPC), with the aim of obtaining an improved signal stability in batches of electrodes and realizing the simultaneous determination of both substances. The morphology and structure of the assemblies were analyzed and characterized by UV-Vis spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray powder diffraction (XRD). Electrochemical studies showed that the ordered AuNRs/ITO electrodes have excellent signal reproducibility among several individuals due to the homogeneous mass transfer in the ordered arrangement of the AuNRs. Under the optimized conditions, the simultaneous detection results of DA and TPC showed good linearity in the ranges 1.75-45 μM and 1.5-40 μM, and the detection limits of DA and TPC were 0.06 μM and 0.17 μM, respectively. The results showed that the prepared ordered AuNR/ITO electrode had high sensitivity, long-term stability, and reproducibility for the simultaneous determination of DA and TPC, and it was expected to be applicable for real sample testing.

Sulfur Modified Carbon-Based Single-Atom Catalysts for Electrocatalytic Reactions.

Efficient and sustainable energy development is a powerful tool for addressing the energy and environmental crises. Single-atom catalysts (SACs) have received high attention for their extremely high atom utilization efficiency and excellent catalytic activity, and have broad application prospects in energy development and chemical production. M-N4 is an active center model with clear catalytic activity, but its catalytic properties such as catalytic activity, selectivity, and durability need to be further improved. Adjustment of the coordination environment of the central metal by incorporating heteroatoms (e.g., sulfur) is an effective and feasible modification method. This paper describes the precise synthetic methods for introducing sulfur atoms into M-N4 and controlling whether they are directly coordinated with the central metal to form a specific coordination configuration, the application of sulfur-doped carbon-based single-atom catalysts in electrocatalytic reactions such as ORR, CO2RR, HER, OER, and other electrocatalytic reaction are systematically reviewed. Meanwhile, the effect of the tuning of the electronic structure and ligand configuration parameters of the active center due to doped sulfur atoms with the improvement of catalytic performance is introduced by combining different characterization and testing methods. Finally, several opinions on development of sulfur-doped carbon-based SACs are put forward.

Physicochemical and Catalytic Properties of Bifunctional Catalysts with Different Contents of Zeolite ZSM-22 in the Hydrodeoxygenation of Sunflower Oil

Physicochemical and Catalytic Properties of Bifunctional Catalysts with Different Contents of Zeolite ZSM-22 in the Hydrodeoxygenation of Sunflower Oil

Catalytic properties of TiO2 nanofibers in CO2 conversion: a comparative analysis of polymer matrices

Catalytic properties of TiO2 nanofibers in CO2 conversion: a comparative analysis of polymer matrices

Hydrogen peroxide activation and liquid‐phase selective oxidations over Ti,Zr‐based metal–organic framework PCN‐415

A mixed Ti,Zr‐based metal–organic framework, PCN‐415 (Porous Coordination Network), and the corresponding Ti,Zr‐oxocluster [Ti8Zr2O12(CH3COO)16] have been synthesized and comprehensively characterized by powder X‐Ray diffraction (PXRD), low‐temperature nitrogen adsorption, scanning electron microscopy, thermogravimetric analysis, Fourier‐transform infrared spectroscopy, and Raman spectroscopy. The catalytic performance of both PCN‐415 and the Ti,Zr‐oxocluster was evaluated in the selective oxidation of representative thioethers, alkenes, and alkylphenols using aqueous hydrogen peroxide and tert‐butyl hydroperoxide as oxidants. The nature of the oxidation products formed indicates that, most likely, both Ti and Zr sites contribute to the catalytic activity of PCN‐415, although the contribution of Ti seems to be more significant. Examination of PCN‐415 after treatment with H2O2 using diffuse reflectance UV–vis spectroscopy indicates the formation of Ti peroxo complexes while Raman spectroscopy shows evidence for the formation of both Ti and Zr peroxo species. The potential formation of missing linker‐type defects and their role in facilitating catalytic activity were addressed. The stability of the PCN‐415 structure under the catalytic conditions was confirmed by PXRD. The absence of metal leaching and the heterogeneous nature of the catalysis were verified. The catalyst could be easily recovered from the reaction mixture and reused several times without loss of the catalytic properties.

Linker Mediated Electronic-State Manipulation of Conjugated Organic Polymers Enabling Highly Efficient Oxygen Reduction.

Conjugated polymers with tailorable composition and microarchitecture are propitious for modulating catalytic properties and deciphering inherent structure-performance relationships. Herein, we report a facile linker engineering strategy to manipulate the electronic states of metallophthalocyanine conjugated polymers and uncover the vital role of organic linkers in facilitating electrocatalytic oxygen reduction reaction (ORR). Specifically, a set of cobalt phthalocyanine conjugated polymers (CoPc-CPs) wrapped onto carbon nanotubes (denoted CNTs@CoPc-CPs) are judiciously crafted via in situ assembling square-planar cobalt tetraaminophthalocyanine (CoPc(NH2)4) with different linear aromatic dialdehyde-based organic linkers in the presence of CNTs. Intriguingly, upon varying the electronic characteristic of organic linkers from terephthalaldehyde (TA) to 2,5-thiophenedicarboxaldehyde (TDA) and then to thieno/thiophene-2,5-dicarboxaldehyde (bTDA), their corresponding CNTs@CoPc-CPs exhibit gradually improved electrocatalytic ORR performance. More importantly, theoretical calculations reveal that the charge transfer from CoPc units to electron-withdrawing linkers (i.e., TDA and bTDA) drives the delocalization of Co d-orbital electrons, thereby downshifting the Co d-band energy level. Accordingly, the active Co centers with more positive valence state exhibit optimized binding energy toward ORR-relevant intermediates and thus a balanced adsorption/desorption pathway that endows significant enhancement in electrocatalytic ORR. This work demonstrates a molecular-level engineering route for rationally designing efficient polymer catalysts and gaining insightful understanding of electrocatalytic mechanisms.

Unprecedented POSS-Linked 3D Covalent Organic Frameworks with 2-Fold Interpenetrated scu or sqc Topology Regulated by Porphyrin Center for Photocatalytic CO2 Reduction.

The synthesis and characterization of porphyrin center regulated three-dimensional covalent organic frameworks (COFs) with 2-fold interpenetrated scu or sqc topology have been investigated. These COFs exhibit unique structural features and properties, making them promising candidates for photocatalytic applications in CO2 reduction and artemisinin synthesis. The porphyrin center serves as an anchor for metal ions, allowing precise control over structures and functions of the frameworks. Furthermore, the metal coordination within the framework imparts desirable catalytic properties, enabling their potential use in photocatalytic reactions. Overall, these porphyrin center regulated metal-controlled COFs offer exciting opportunities for the development of advanced materials with tailored functionalities.

Linker Mediated Electronic‐State Manipulation of Conjugated Organic Polymers Enabling Highly Efficient Oxygen Reduction

AbstractConjugated polymers with tailorable composition and microarchitecture are propitious for modulating catalytic properties and deciphering inherent structure‐performance relationships. Herein, we report a facile linker engineering strategy to manipulate the electronic states of metallophthalocyanine conjugated polymers and uncover the vital role of organic linkers in facilitating electrocatalytic oxygen reduction reaction (ORR). Specifically, a set of cobalt phthalocyanine conjugated polymers (CoPc‐CPs) wrapped onto carbon nanotubes (denoted CNTs@CoPc‐CPs) are judiciously crafted via in situ assembling square‐planar cobalt tetraaminophthalocyanine (CoPc(NH2)4) with different linear aromatic dialdehyde‐based organic linkers in the presence of CNTs. Intriguingly, upon varying the electronic characteristic of organic linkers from terephthalaldehyde (TA) to 2,5‐thiophenedicarboxaldehyde (TDA) and then to thieno/thiophene‐2,5‐dicarboxaldehyde (bTDA), their corresponding CNTs@CoPc‐CPs exhibit gradually improved electrocatalytic ORR performance. More importantly, theoretical calculations reveal that the charge transfer from CoPc units to electron‐withdrawing linkers (i.e., TDA and bTDA) drives the delocalization of Co d‐orbital electrons, thereby downshifting the Co d‐band energy level. Accordingly, the active Co centers with more positive valence state exhibit optimized binding energy toward ORR‐relevant intermediates and thus a balanced adsorption/desorption pathway that endows significant enhancement in electrocatalytic ORR. This work demonstrates a molecular‐level engineering route for rationally designing efficient polymer catalysts and gaining insightful understanding of electrocatalytic mechanisms.

Unprecedented POSS‐Linked 3D Covalent Organic Frameworks with 2‐Fold Interpenetrated scu or sqc Topology Regulated by Porphyrin Center for Photocatalytic CO2 Reduction

AbstractThe synthesis and characterization of porphyrin center regulated three‐dimensional covalent organic frameworks (COFs) with 2‐fold interpenetrated scu or sqc topology have been investigated. These COFs exhibit unique structural features and properties, making them promising candidates for photocatalytic applications in CO2 reduction and artemisinin synthesis. The porphyrin center serves as an anchor for metal ions, allowing precise control over structures and functions of the frameworks. Furthermore, the metal coordination within the framework imparts desirable catalytic properties, enabling their potential use in photocatalytic reactions. Overall, these porphyrin center regulated metal‐controlled COFs offer exciting opportunities for the development of advanced materials with tailored functionalities.

The synthesis, structure, and catalytic properties of Cl‐substituted tridentate ONO Schiff base molybdenum(VI) complexes: Expeditious synthesis of 1,8‐dioxo‐octahydro‐xanthene derivatives

A family of molybdenum complexes with a general formula of [MoO2L]2 have been synthesized and fully characterized, where L is a tridentate ONO Schiff base ligand featuring a Cl substituent in different positions on the aromatic ring of salicylidene‐2‐aminophenolato backbone. The solvent molecule stabilized the monomeric structure of [MoO2LD] (D = DMF or DMSO) allowing single‐crystal X‐ray diffraction of the three new complexes. The dimeric complexes are utilized to catalyze the reaction of aldehydes/ketones with dimedone, leading to 1,8‐dioxo‐octahydro‐xanthene derivatives in N,N‐dimethylformamide. We found that their catalytic activity is enhanced by the electron‐withdrawing group of the Cl substituent on the ONO ligand. In addition, the position of the Cl substituent can also positively influence the catalysis performance: (ortho (L1) > para (L3) > meta (L2) ≈ meta (L4)). The high efficiency of the catalysts promises high yields and selectivity with a low catalyst loading and allows a wide substrate scope of aldehydes/ketones for the reaction. In addition, the method employs recrystallization for purifying products and can be easily scaled up to gram levels, indicating a strong potential for industrial utilization.

Improved protein splicing through viral passaging.

Intervening proteins (inteins) are translated as subdomains within host proteins and removed through an intein-driven splicing reaction where the flanking sequences (exteins) are joined with a peptide bond. Previously, we developed a self-removing translation reporter for labeling Ebola virus (EBOV). In this reporter, an intein (RadA) containing the fluorescent protein ZsGreen (ZsG) is inserted within the EBOV protein VP30. Upon VP30-RadA-ZsG expression from the viral genome, RadA-ZsG is removed from VP30 through the protein splicing activity of RadA, generating functional, non-tagged VP30 and functional ZsGreen. While incorporation of our VP30-RadA-ZsG fusion reporter into recombinant EBOV (rEBOV-RadA-ZsG) resulted in an infectious virus that expresses ZsG upon infection of cells, this virus displayed a replication defect compared to wild-type EBOV, which might be the result of insufficient RadA splicing. Here, we demonstrate that the serial passaging of rEBOV-RadA-ZsG in human cells led to an increase in replication efficiency compared to unpassaged rEBOV-RadA-ZsG. Sequencing of passaged viruses revealed intein-specific mutations. These mutations improve intein activity in both prokaryotic and eukaryotic systems, as well as in multiple extein contexts. Taken together, our findings offer a novel means to select for inteins with enhanced catalytic properties that appear independent of extein context and expression system.IMPORTANCEIntervening proteins (inteins) are self-removing protein elements that have been utilized to develop a variety of innovative protein engineering technologies. Here, we report the isolation of inteins with improved catalytic activity through viral passaging. Specifically, we inserted a highly active intein within an essential protein of Ebola virus and serially passaged this recombinant virus, which led to intein-specific hyper-activity mutations. The identified mutations showed improved intein activity within both bacterial and eukaryotic expression systems and in multiple extein contexts. These results present a new strategy for developing inteins with improved splicing activity.

Deciphering the Role of Native Defects in Dopant‐Mediated Defect Engineering of Carbon Electrocatalysts

AbstractDoping–dedoping chemistry lays the cornerstone for converting heteroatom dopants into intrinsic defects as the emerging active sites of carbon catalysts, but the defect content is yet hindered by inadequate doping efficiencies. Comprehending crucial factors behind the doping of pristine carbon and their correlation to the catalytic properties of dedoped carbon is thus of high significance. Here, the overlooked impact of native defects in pristine carbon on dopant‐mediated defect engineering of carbon catalysts is explicitly unveiled. Intact fullerene (C60), C60‐derived carbon, and carbon black in distinct pentagon/edge defect states are employed as respective precursors to undergo a nitrogen doping–dedoping treatment. Theoretical and experimental evidence consistently indicates that native pentagons change the preferred N doping site from the edge to the basal plane, leading to a substantially higher doping level. Importantly, in addition to pentagons from the removal of zigzag‐edged pyridinic N, N dopants in in‐plane pentagons are more easily dedoped than those in hexagons, generating even more pentagons in a new pentagon–heptagon–pentagon structure as oxygen reduction active sites. The optimized defect‐rich carbon gives an outstanding half‐wave potential of 0.834 V (0.846 V for Pt/C) via the four‐electron pathway, excellent long‐term durability, and prospective applicability in zinc–air batteries.

Optimization of Matrix Components for Improved Catalytic Activities of Cellulase Immobilized on Biochar-Chitosan Beads

Bioethanol is a renewable energy that is gaining popularity globally. It’s biochemical production requires the use of enzyme, especially cellulase. Cellulase is an enzyme that catalyzes the degradation of cellulose and related polysaccharides which finds applications in food, textiles, detergents, biofuels etc. However, the worldwide use of cellulase is limited by its relatively high production costs and low biological activity. This study was design to locally produce biochar-chitosan beads at optimized conditions to immobilize cellulase for improved thermal and storage stability as well as ensure reusability of the enzyme so as to improve biological activity and avoid the continuous production of free cellulase thereby reducing the production cost. Biochar was produced by pyrolyzing sugarcane bagasse in a local airtight chamber for 1 hour. Beads were formed from different ratios of biochar and chitosan in varying concentrations of calcium chloride solution as generated by design expert software version 13. The beads were dried in an oven at 50 0C for 24 hours and functionalized in 25% glutaraldehyde (GDA). The beads were loaded with enzyme (10.06 µmole/min/mL) at room temperature (27 ± 3 oC). Enzyme activity, thermal stability, storage stability and reusability tests were carried out according to standard procedures. The half-life and activation energy were also evaluated. The result showed that the optimum activity of the loaded enzyme (2.63 µmole/min/mL) was obtained when 2.46 g of porous biochar was mixed with 2.48 g chitosan in 5 % Calcium chloride aqueous solution. The immobilized enzyme was able to maintain thermal stability between 30 oC and 70 oC while the activity for free enzyme started declining after 50 oC. Also, the activation energy for immobilized cellulase enzyme (23.17 KJ/mol) was lower than the activation energy (55.146 KJ/mol) for free cellulase. The half-life, when stored at ambient Temperature (27 ± 3 oC), for free enzyme was 0.4 days while the half-life for immobilized enzyme was 3.59 days. Therefore, cellulase immobilized on support locally produced at optimal conditions had improved catalytic properties when compared to the free enzyme. Hence, more indigenous materials and practices may be employed for a cost effective and cheaper industrial processes.

Cascaded Nanozyme Based pH-Responsive Oxygenation for Targeted Eradication of Resistant Helicobacter Pylori.

Nanozymes, as substitutes for natural enzymes, are constructed as cascade catalysis systems for biomedical applications due to their inherent catalytic properties, high stability, tunable physicochemical properties, and environmental responsiveness. Herein, a multifunctional nanozyme is reported to initiate cascade enzymatic reactions specific in acidic environments for resistant Helicobacter pylori (H. pylori) targeting eradication. The cobalt-coated Prussian blue analog based FPB-Co-Ch NPs displays oxidase-, superoxide dismutase-, peroxidase-, and catalase- mimicking activities that trigger • and H2O2 to supply O2, thereby killing H. pylori in the stomach. To this end, chitosan is modified on the surface to exert bacterial targeted adhesion and improve the biocompatibility of the composite. In the intestinal environment, the cascade enzymatic activities are significantly inhibited, ensuring the biosafety of the treatment. In vitro, sensitive and resistant strains of H. pylori are cultured and the antibacterial activity is evaluated. In vivo, murine infection models are developed and its success is confirmed by gastric mucosal reculturing, Gram staining, H&E staining, and Giemsa staining. Additionally, the antibacterial capacity, anti-inflammation, repair effects, and biosafety of FPB-Co-Ch NPs are comprehensively investigated. This strategy renders a drug-free approach that specifically targets and kills H. pylori, restoring the damaged gastric mucosa while relieving inflammation.

General Modification Strategy on Amorphous Materials to Boost Catalytic Performance

AbstractAmorphous materials with a high number of unsaturated coordinated dangling bonds exhibits macroscopic homogeneity and isotropy, making it easily modifiable to improve the catalytic properties. At present, several feasible modification strategies for amorphous materials have been proposed and applied to multiple catalytic fields. This review aims to provide a comprehensive overview of recent research advancements in the modification of amorphous materials for catalysis. First, the general strategies for modifying amorphous materials are summarized. Subsequently, the potential applications of modified amorphous materials in electrocatalysis and photocatalysis are highlighted. Additionally, the positive effects of various modification tools on the catalytic properties of amorphous materials are elucidated. Finally, a summary of the challenges and offer a critical perspective on the further development of modified amorphous materials are presented. The primary goal of this review is to offer a systematic understanding of how to enhance catalytic performance and to stimulate further research on amorphous catalysts in the future.

Detection of Ascorbic Acid by Two-Dimensional Conductive Metal-Organic Framework-Based Electrochemical Sensors

The realization of efficient and accurate detection of biomolecules has become a key scientific issue in the field of life sciences. With the rapid development of nanotechnology, electrochemical sensors constructed from the superior physical and chemical properties of nanomaterials show faster and more accurate detection. Among nanomaterials, two-dimensional conductive MOF (2D cMOF) is considered to be a star material in electrochemical sensors due to its remarkable conductivity, high porosity, and stability. In this paper, a Cu3(HHTP)2/SPE electrochemical sensor for the detection of ascorbic acid (AA) was constructed by modifying 2D cMOF (Cu3(HHTP)2) on the surface of the screen-printed electrode (SPE). The sensor exhibited excellent catalytic activity in the detection of AA, with a lower detection limit of 2.4 μmol/L (S/N = 3) and a wide linear range of 25–1645 μmol/L. This high catalytic activity can be attributed to the abundant catalytic sites in Cu3(HHTP)2 and the rapid electron transfer between Cu+ and Cu2+, which accelerates the oxidation of AA. This work lays a foundation for the subsequent development of MOFs with special electrochemical catalytic properties and the integration of 2D cMOF into intelligent electrical analysis devices.

The Surface Confinement of FeO Assists in the Generation of Singlet Oxygen and High-Valent Metal-Oxo Species for Enhanced Fenton-Like Catalysis.

Transition metal compounds (TMCs) have long been potential candidate catalysts in persulfate-based advanced oxidation process (PS-AOPs) due to their Fenton-like catalyze ability for radical generation. However, the mechanism involved in TMCs-catalyzed nonradical PS-AOPs remains obscure. Herein, the growth of FeO on the Fe3O4/carbon precursor is regulated by restricted pyrolysis of MIL-88A template to activate peroxymonosulfate (PMS) for tetracycline (TC) removal. The higher FeO incorporation conferred a 2.6 times higher degradation performance than that catalyzed by Fe3O4 and also a higher interference resistance to anions or natural organic matter. Unexpectedly, the quenching experiment, probe method, and electron paramagnetic resonance quantitatively revealed that the FeO reassigned high nonradical species (1O2 and FeIV═O) generation to replace original radical system created by Fe3O4. Density functional theory calculation interpreted that PMS molecular on strongly-adsorbed (200) and (220) facets of FeO enjoyed unique polarized electronic reception for surface confinement effect, thus the retained peroxide bond energetically supported the production of 1O2 and FeIV═O. This work promotes the mechanism understanding of TMCs-induced surface-catalyzed persulfate activation and enables them better perform catalytic properties in wastewater treatment.

Synthesis and characterization of Ag@Ni co-axial nanocables and their fluorescent and catalytic properties

Abstract We report here a convenient, rapid one-pot synthesis of new metal–metal core–shell nanocomposites comprising silver nanowires (AgNWs) coated with nickel. The resulting AgNWs and nickel-coated silver nanocables average 60–80 nm in diameter were prepared by the polyol synthetic route. This method employed ethylene glycol as a reducing agent and polyvinylpyrrolidone as a capping agent. These nanomaterials are designated as AgNWs (0.1 M) and Ag@Ni (0.2 M), Ag@Ni (0.3 M), Ag@Ni (0.4 M), and Ag@Ni (0.5 M) nanocables based on the nickel content and were characterized by scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), UV–Visible (UV–Vis) spectroscopy, and photoluminescence (PL) spectroscopy. The morphology of each nanowire and nanocable was clarified using SEM, while EDX quantified the presence of Ni. XRD patterns confirmed the face-centered cubic structure of the nanomaterials. The Debye–Scherrer formula was applied to establish different characteristics such as crystallite size and lattice constant. Surface plasmon resonance was measured using UV−Vis spectroscopy and fluorescence of each product was determined by PL spectroscopy, respectively. Both the AgNWs and Ag@Ni nanocables catalyze the reduction of p-nitrophenol to p-aminophenol by sodium borohydride.