Carboxymethyl Cellulose Research Articles

Preparation, Optimization, and Characterization of Bovine Bone Gelatin/Sodium Carboxymethyl Cellulose Nanoemulsion Containing Thymol

The aim of this study is to produce a biodegradable food packaging material that reduces environmental pollution and protects food safety. The effects of total solids content, substrate ratio, polyphenol content, and magnetic stirring time on bovine bone gelatin/sodium carboxymethylcellulose nanoemulsion (BBG/SCMC–NE) were investigated using particle size, PDI, turbidity, rheological properties, and zeta potential as evaluation indexes. The micro, structural, antioxidant, encapsulation, and release properties were characterized after deriving its optimal preparation process. The results showed that the nanoemulsion was optimally prepared with a total solids content of 2%, a substrate ratio of 9:1, a polyphenol content of 0.2%, and a magnetic stirring time of 60 min. SEM showed that the nanoemulsion showed a dense and uniform reticulated structure. FTIR and XRD results showed that covalent cross-linking of proteins and polysaccharides altered the structure of gelatin molecular chains to a more compact form but did not change its semi-crystalline structure. DSC showed that the 9:1 BBG/SCMC–NE had a higher thermal denaturation temperature and greater thermal stability, and its DPPH scavenging rate could reach 79.25% and encapsulation rate up to 90.88%, with excellent slow-release performance. The results of the study provide basic guidance for the preparation of stable active food packaging with excellent properties.

Assessment of Physicochemical Properties of Orange Juice Concentrate Formulated with Pectin, Xanthan, and CMC Hydrocolloids

Orange concentrate (OC) is one of the main raw materials in the nonalcoholic beverage industry. Considering the difference in orange varieties, preserving its natural quality is essential to yield a product with favorable attributes and physical stability. Thus, the present study is aimed at assessing the effect of pectin, xanthan, and carboxymethyl cellulose (CMC) in a concentration range of 0–0.2% (w/v) along with mixing temperature on Brix, pH, acidity, density, turbidity, and viscosity of OC and at calculating the model equation for each attribute. The results showed that, except for CMC, the influence of concentration, type, and amount of hydrocolloid on pH changes was insignificant. Adding each hydrocolloid individually, in pairs, or threes reduced the density, and the measured density was lower at a mixing temperature of 4°C. Also, it was observed that mixing temperature was the only factor influencing turbidity, and the values were significantly lower at 80°C compared to 4°C. A significant interaction effect of xanthan concentration and mixing temperature on the Brix was observed. Adding hydrocolloids, except pectin, resulted in a significant (p<0.05) increase in viscosity, and xanthan had the greatest effect on the viscosity. A suitable model was designed using pectin and xanthan, pectin and CMC, and all three gums, resulting in a final OC product with high stability and improved physical and chemical attributes. The optimized values for Brix, pH, acidity, density, turbidity, and OC viscosity were achieved using 0.08% pectin, 0.19% xanthan, and 0.08% CMC at 80°C mixing temperature.

A New Concept for Interpretation of the Viscoelastic Behavior of Aqueous Sodium Carboxymethyl Cellulose Systems.

Viscoelastic behaviors of aqueous systems of commercially available sodium carboxymethyl cellulose (NaCMC) samples with the degrees of substitution (DS) of approximately 0.68 and 1.3, and the weight-average molar masses (Mw) higher than 200 kg mol-1 dissolved in pure water and aqueous sodium chloride solutions were investigated over a wide concentration (c) range of NaCMC samples. The dependencies of the specific viscosity (ηsp), the average relaxation time (τw), and the reciprocal of the steady-state compliance (Je-1) on c were discussed. The relationships ηsp ∝ c3, τw ∝ c2, and Je-1 ∝ c, characteristic of the rod particle suspensions, were clearly observed in a range lower than the c where the critical gel behavior was observed. Thus, a new concept based on the rheology of rod particle suspensions was employed to interpret the viscoelastic behaviors obtained in the c range. In this context, NaCMC polymer molecules are assumed to behave as extended rod particles with length (L) and diameter (d), including effective electrostatic repulsive distances, due to the dissociation of Na+ in aqueous systems. Thus, the number density of polymer molecules is given to be ν = c/Mw, and viscoelastic parameters such as ηsp, τw, and Je-1 are calculated using the theoretical model for rod particle suspensions proposed by Doi and Edwards. This concept reasonably described not only the viscoelastic data obtained in this study but also those from other groups using NaCMC samples with different DS and Mw values.

Versatile Biomass‐Based Injectable Photothermal Hydrogel for Integrated Regenerative Wound Healing and Skin Bioelectronics

AbstractThe continuously growing utilization of wound healing materials and skin bioelectronics urges the development of flexible hydrogels for personal therapy and health management. Versatile conductive hydrogels prepared from natural biomass are ideal candidates as one of the promising solutions for chronic wound management. Here, the study proposes a kind of robust (strain: 1560.8%), adhesive, self‐healing, injectable, antibacterial (sterilization rate: 99%), near‐infrared (NIR) photothermal responsive, biocompatible, and conductive hydrogel (CPPFe@TA) composed of carboxymethyl cellulose and tannic acid/iron ion complex (TA@Fe3+), featuring rapid self‐assembly and tunable crosslinking time. TA@Fe3+ facilitated the self‐catalysis of the polymerization reaction, and the crosslinking time could be controlled by adjusting Fe3+ concentration. Under NIR irradiation, the hydrogel exhibited remarkable photothermal antibacterial performance. In the full‐thickness skin defect repair experiment on mice, the prepared hydrogel dressing significantly enhanced wound healing. After 14 days, the wound healing rate (95.49%) of CPPFe@TA3 hydrogel + NIR treatment greatly exceeded that of commercial dressings. Meanwhile, the hydrogels has good electrical conductivity and thermo‐responsiveness, making them promising for skin bioelectronics in physiological signal monitoring and rehabilitation exercise management. This work therefore offers a promising strategy for developing versatile biomass‐based hydrogels, which is expected to be applicable to integrated regenerative wound healing and skin bioelectronics.

Effect of limited proteolysis and CaCl2 on the rheology, microstructure and in vitro digestibility of pea protein-carboxymethyl cellulose mixed gel

Limited proteolysis, CaCl2 and carboxymethyl cellulose (CMC) have individually demonstrated ability to increase the gel strength of laboratory-extracted plant proteins. However, the syneresis effects of their combination on the gelling capacity of commercial plant protein remains unclear. This was investigated by measuring the rheological property, microstructure and protein–protein interactions of gels formed from Alcalase hydrolyzed or intact pea proteins in the presence of 0.1 % CMC and 0–25 mM CaCl2. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) showed the molecular weight of pea protein in the mixture were < 15 kDa after hydrolysis. The hydrolysates showed higher intrinsic fluorescence intensity and lower surface hydrophobicity than the intact proteins. Rheology showed that the storage modulus (G') of hydrolyzed pea protein (PPH)-based gels sightly decreased compared to those of native proteins. 5–15 mM CaCl2 increased the G’ for both PP and PPH-based gels and decreased the strain in the creep-recovery test. Scanning electron microscopy (SEM) showed the presence of smaller protein aggregates in the PPH-based gels compared to PP gels and the gel network became denser, and more compact and heterogenous in the presence of 15 and 25 mM CaCl2. The gel dissociation assay revealed that hydrophobic interactions and hydrogen bonds were the dominant forces to maintain the gel structure. In vitro digestion showed that the soluble protein content in PPH-based gels was 10 ∼ 30 % higher compared to those of the PP counterpart. CaCl2 addition reduced protein digestibility with a concentration dependent behavior. The results obtained show contrasting effects of limited proteolysis and CaCl2 on the gelling capacity and digestibility of commercial pea proteins. These findings offer practical guidelines for developing pea protein-based food products with a balanced texture and protein nutrition through formulation and enzymatic pre-treatment.

Single-Cell Insights into Mouse Testicular Toxicity under Peripubertal Exposure to Di(2-ethylhexyl) phthalate.

Male fertility depends on normal pubertal development. Di(2-ethylhexyl) phthalate (DEHP) is a potent antiandrogen chemical, and exposure to DEHP during peripuberty can damage the developing male reproductive system, especially the testis. However, the specific cellular targets and differentiation processes affected by DEHP, which lead to testicular toxicity, remain poorly defined. Herein, we presented the first single-cell transcriptomic profile of the pubertal mouse testis following DEHP exposure. To carry out the experiment, two groups (n = 8 each) of three-week old male mice were orally administered 0.5% carboxymethylcellulose sodium salt or 100 mg/kg body weight DEHP daily from postnatal day 21 to 48, respectively. Using single-cell RNA sequencing, a total of 31 distinct cell populations were identified, notably, Sertoli and Leydig cells emerged as important targets of DEHP. DEHP exposure significantly decreased the proportions of Sertoli cell clusters expressing mature Sertoli markers (Sox9 and Ar), and selectively reduced the expression of testosterone synthesis genes in fetal Leydig cells. Through cell-cell interaction analyses, we observed changed numbers of interactions in Sertoli cells 1 (SCs1), Leydig cells 1 (LCs1) and interstitial macrophages (ITMs), and we also identified cell-specific ligand gene expressions in these clusters, such as Inha, Fyn, Vcam1, and Apoe. Complementary in vitro assays confirmed that DEHP directly reduced the expression of genes related to Sertoli cell adhesion and intercellular communication. In conclusion, peripubertal DEHP exposure reduced the number of mature Sertoli cells and may disrupt testicular steroidogenesis by affecting the testosterone synthesis genes in fetal Leydig cells rather than adult Leydig cells.

Targeting of C-ROS-1 Activity Using a Controlled Release Carrier to Treat Craniosynostosis in a Preclinical Model of Saethre-Chotzen Syndrome

Saethre-Chotzen syndrome (SCS) is one of the most prevalent craniosynostosis, caused by a loss-of-function mutation in the TWIST-1 gene, with current treatment options relying on major invasive transcranial surgery. TWIST-1 haploinsufficient osteogenic progenitor cells exhibit increased osteogenic differentiation potential due to an upregulation of the transmembrane tyrosine kinase receptor, C-ROS-1, a TWIST-1 target gene known to promote bone formation. The present study assessed the efficacy of suppressing C-ROS-1 activity using a known chemical inhibitor to C-ROS-1, crizotinib, to halt premature coronal suture fusion in a preclinical mouse model of SCS. Crizotinib (1 μM, 2 μM, or 4 μM) was administered locally over the calvaria of Twist‐1del/+ heterozygous mice prior to coronal suture fusion using either a nonresorbable collagen sponge (quick drug release) or a resorbable sodium carboxymethylcellulose microdisk (slow sustained release). Coronal suture fusion rates and bone parameters were determined by μCT imaging and histomorphometric analysis of calvaria postcoronal suture fusion. Results demonstrated a dose-dependent increase in the efficacy of crizotinib to maintain coronal suture patency, with no adverse effects to brain, kidney, liver, and spleen tissue, or blood cell parameters. Moreover, crizotinib delivered on microdisks resulted in a greater efficacy at a lower concentration to reduce bone formation at the coronal suture sites compared to sponges. However, the bone inhibitory effects were found to be diminished by over time following cessation of treatment. Our findings lay the foundation for the development of a pharmacological nonsurgical, targeted approach to temporarily maintain open coronal sutures in SCS patients. This study could potentially be used to develop similar therapeutic strategies to treat different syndromic craniosynostosis conditions caused by known genetic mutations.

Deep insight into physical properties of carboxymethyl cellulose-barium oxide nanocomposites

Nanocomposites, blending the unique properties of inorganic nanoparticles with polymers, are gaining momentum in various industries. This study delves into the synthesis and characterization of barium oxide (BaO)-doped carboxymethyl cellulose (CMC) nanocomposites, focusing on their structural, optical, electrical, and dielectric properties. Using an in-situ polymerization method, CMC films were doped with 5 % and 10 % BaO nanoparticles. X-ray diffraction analysis revealed that the doped samples exhibited enhanced crystallinity compared to pure CMC, with crystallinity percentages measured at 37.95 % and 28.86 % for 5 % and 10 % BaO, respectively, indicating the successful incorporation of BaO. Scanning electron microscopy illustrated the distribution of BaO nanoparticles, showing spherical agglomerations on the film surface. SEM analysis reveals emergence of spherical agglomerations and bright spots on nanocomposite film surface upon BaO introduction, indicating BaO nanoparticles presence. Further, the BaO nanoparticles act as catalytic and nucleating agents, influencing crystalline structure nucleation and growth, potentially enhancing film homogeneity and structural integrity. In addition, UV–visible spectroscopy elucidated the optical properties, indicating a shift in the bandgap from indirect to direct with BaO addition. The bandgap values decrease upon the addition of BaO, indicating a transition from an amorphous to a nanocrystalline structure, with respective reduction percentages of 22.73 % and 10.71 % for the 5%BaO/CMC and 10 %BaO/CMC samples compared to CMC. Electrical conductivity measurements showed enhanced conductivity in 10 % BaO/CMC due to improved charge carrier mobility, supported by dielectric studies demonstrating increased dielectric. The introduction of 5 % and 10 % BaO resulted in reductions of approximately 62.06 % and 65.77 %, respectively, compared to the pure CMC sample. This decrease in dielectric loss indicates an enhancement in the electrical properties of the nanocomposites. This comprehensive investigation could give further insights into the different properties of BaO-doped CMC nanocomposites, offering insights into their potential applications in various fields such as electronics, energy storage, and optoelectronics.

Single-Crystal P2-Na0.67Mn0.67Ni0.33O2 Cathode Material with Improved Cycling Stability for Sodium-Ion Batteries.

Layered oxides constitute one of the most promising cathode materials classes for large-scale sodium-ion batteries because of their high specific capacity, scalable synthesis, and low cost. However, their practical use is limited by their low energy density, physicochemical instability, and poor cycling stability. Aiming to mitigate these shortcomings, in this work, we synthesized polycrystalline (PC) and single-crystal (SC) P2-type Na0.67-δMn0.67Ni0.33O2 (NMNO) cathode materials through a solid-state route and evaluated their physicochemical and electrochemical performance. The SC-NMNO cathode with a large mean primary particle size (D50) of 12.7 μm was found to exhibit high cycling stability leading to 47% higher capacity retention than PC-NMNO after 175 cycles at 1C rate in the potential window 4.2-1.5 V. This could be attributed to the effective mitigation of parasitic side reactions at the electrode-electrolyte interface and suppressed intergranular cracking induced by anisotropic volume changes. This is confirmed by the lower volume variation of SC-NMNO (ΔV ∼ 1.0%) compared to PC-NMNO (ΔV ∼ 1.4%) upon charging to 4.2 V. Additionally, the SC-NMNO cathode displayed slightly higher thermal stability compared to PC-NMNO. Both cathodes exhibited good chemical stability against air and water exposure, thus enabling material storage/handling in the ambient atmosphere as well as making them suitable for aqueous processing. In this regard, PC-NMNO was investigated with two low-cost aqueous binders, carboxymethyl cellulose, and sodium trimetaphosphate, which exhibited higher binding strength and displayed excellent electrochemical performance compared to PVDF, which could potentially lead to significant cost reduction in electrode manufacturing.

Tailoring the Holocellulose Fiber/Acrylic Resin Composite Interface with Hydrophobic Carboxymethyl Cellulose to Enhance Optical and Mechanical Properties.

Interface engineering is essential for cellulosic fiber-reinforced polymer composites to achieve high strength and toughness. In this study, carboxymethyl cellulose (CMC) functionalized with hydrophobic quaternary ammonium ions (QAs) were utilized to modify the interface between holocellulose fibers (HF) and acrylic resin. The wet HF/CMC papers were prepared by vacuum filtration, akin to papermaking, followed by cationic ion exchange with different hydrophobic QAs. Subsequently, the modified papers were dried, impregnated with an acrylic resin monomer, and cured to produce transparent composite films. The effect of the hydrophobic QA moieties on the structure and optical and mechanical properties of the HF/CMC/acrylic resin composites were investigated. The composite film with cetyltrimethylammonium (CTA)-functionalized CMC showed high optical transmittance (87%) with low haze (43%), while the composite film with phenyltrimethylammonium (PTMA)-functionalized CMC demonstrated high Young's modulus of 7.6 GPa and high tensile strength of 180 MPa. These properties are higher than those of the composites prepared through covalent interfacial modification strategies. The results highlighted the crucial role of hydrophobic functionalized CMCs in facilitating homogeneous resin impregnation in the HF fiber network, producing a composite with enhanced interfacial adhesion strength, increased optical transparency, and mechanical strength. This facile use of hydrophobic CMCs as interfacial compatibilizers provides an energy-efficient route for preparing transparent, thin, and flexible composite films favorable in optoelectronic applications.

Enhanced Resistance to Desiccation Cracking of Polymer-Bentonite Mixtures: An Experimental Investigation of Underlying Mechanisms

Polymers have been shown to enhance the resistance of swelling clay soils to desiccation cracking, a critical property in engineering applications, particularly in waste containment facilities. However, the microscopic and macroscopic mechanisms driving this improvement remain poorly understood. Additionally, the influence of different mixing methods on these mechanisms is not well-established. While dry mixing is more convenient for onsite implementation, wet mixing offers intercalation between clay and polymer, resulting in potentially more durable stabilization outcomes. In this paper, key properties related to desiccation cracking of a polymer-clay mixture were measured. The mixture was synthesised by amending Na-bentonite with sodium carboxymethyl cellulose (Na-CMC) using dry and wet mixing. Soil water retention characteristics curves (SWCC), swelling and shrinkage potential, tensile strength, and pore size distribution by mercury intrusion porosimetry (MIP) were measured for both mixtures and untreated bentonite. Compared to pure bentonite, mixtures were found to have slightly reduced air-entry values, significantly lower swelling and shrinkage potentials and higher tensile strengths. In all experiments, dry mixing exhibited superior performance compared to wet mixing. MIP analysis of the amended mixtures revealed a more porous structure when compared to untreated bentonite.

Fenugreek seed mucilage-based active edible films for extending fresh fruit shelf life: Antimicrobial and physicochemical properties

Trigonella foenum-graecum, known as fenugreek, belongs to the leguminous family of wild growth in Western Asia, Europe, the Mediterranean, and Asia; its ripe seeds contain a pool of bioactive substances with great potential in the food industry and medicine. In this study, fenugreek seed mucilage (FSM) was extracted and characterized in its structural properties by X-ray diffraction, nuclear magnetic resonance, and high-performance liquid chromatography. Then, the applicability of FSM as an antimicrobial agent was demonstrated via the development of novel, active, edible FSM-based biofilms containing carboxymethyl cellulose and rosemary essential oil (REO). Incorporating REO in the biofilms brought about specific changes in Fourier-transform infrared spectra, affecting thermal degradation behavior. Scanning electron microscopy and atomic force microscopy morphography showed an even distribution of REO and smoother surfaces in the loaded films. Besides, the solubility tests evidenced a reduction in water solubility with increasing REO concentration from 1 to 3 wt%. The biological assay evidenced the antimicrobial activity of REO-loaded biofilms against Staphylococcus aureus and Escherichia coli. Finally, whole apples were dip-coated with FSM-based solutions to showcase future edible systems. The REO-loaded biofilms extended the shelf life of apples to 30 days, demonstrating their potential for sustainable and active coatings.

Evaluation of commercial importance of endophytes isolated from Argemone mexicana and Papaver rhoeas.

The paper industry is a composite one constituting different types of mills, processes, and products. The paper industries consume large amounts of resources, like wood and water. These industries also create huge amounts of waste that have to be treated. In our study, 23 endophytic bacteria were isolated from Argemone mexicana, and 16 endophytic bacteria were isolated from Papaver rhoeas. Seventeen and 15 bacterial endophytes from A. mexicana and P. rhoeas, respectively, showed cellulose-degrading activity. The biochemical and molecular characterization were done for endophytic bacteria with cellulolytic activity. The consortium of cellulose-degrading endophytic bacteria from A. mexicana showed endoglucanase activity (0.462IU/ml) and FPCase enzyme activity (0.269IU/ml) and from P. rhoeas gave endoglucanase activity (0.439IU/ml) and FPCase enzyme activity (0.253IU/ml). Degraded carboxy methylcellulose and filter paper were further treated by Saccharomyces cerevisiae and bioethanol was produced. Cellulose-degrading endophytic bacteria were also tested for auxin, siderophore production, and phosphate solubilization activities. Individual cellulose-degrading endophytic bacteria with plant growth-promoting activities were used as biofertilizers, tested for plant growth-promoting activities using Basmati Pusa 1121 rice, and plant growth parameters were recorded. The degraded paper enhances the growth of rice plants. Selected bacterial endophytes and their consortia from A. mexicana and P. rhoeas were powerful cellulose degraders, which can be further employed for ethanol production and as significant biofertilizers in agriculture.

Combination of carboxymethylcellulose and wood hemicelluloses to enhance encapsulation efficiency and microcapsule wall thickness

Wood hemicelluloses have been used as a wall material for spray-dried microencapsulation of polyphenols. Nevertheless, their incomplete water solubility could negatively impact their encapsulation efficiency (EE) and the formation of a complete protective layer, which might be alleviated synergistically by combining them with carboxymethylcellulose (CMC). Here, we explored the effects of CMC addition (0.5–3.0 %, w/w of WM) on the capacity of galactoglucomannans (GGM) and glucuronoxylans (GX) to retain bioactive compounds of bilberry during spray drying; and its contribution to the formation of wall thickness. The results revealed that EE of GGM and GX increased by 4–8 % with the CMC addition at 0.5 %, but significantly declined at higher CMC concentrations. Adding CMC improved the microcapsules' antioxidant activities, surface smoothness, and solubility, but had no effect on their particle size, thermal properties, amorphous structure, or moisture content. The majority of the GGM and GX microcapsules had a hollow internal structure surrounded by continuous wall matrix with a thickness of about 2.3–2.6 μm, which increased to 3.1–3.5 μm with the addition of 0.5 % CMC. Therefore, using CMC at an optimized proportion as a co-encapsulant improved wood hemicelluloses' ability to protect bioactive compounds during spray drying and enhanced microcapsule wall formation.

Asymmetric chitosan-derivative/carboxymethylcellulose layer-by-layer film combining antimicrobial and vascular regeneration for the repair of infected wounds

Bacterially infected wounds are a serious threat to patients' lives and health, and multifunctional dressings with antimicrobial properties and healing promotion are urgently needed. Thus, we used the cationic and anionic properties of chitosan (CS)-nerol (N) derivative (CSN) and carboxymethylcellulose (CMC) to prepare asymmetric layer-by-layer self-assembled (LBL) composite films (CSN-CMC LBL films) with antibacterial and healing properties using a spin-coating method. SEM images showed that the CSN-CMC LBL films had completely different degrees of roughness at the bottom (hydrophilic layer) and at the top (hydrophobic layer), with the roughness at the top increasing as the number of layers increased. The CSN and CMC were used to prepare asymmetric LBL films via the electrostatic attraction of -COO− and NH3+. In addition, adhesion and water contact angle tests showed that the CSN-CMC LBL films had enhanced tissue adhesion and good hydrophobicity. These materials had excellent antimicrobial activity and good biocompatibility. Importantly, the animal infection model results showed that CSN-CMC-8 LBL films effectively eliminated the infection in vivo, inhibited inflammation, promoted vascular regeneration, accelerated the epithelialization process, and achieved high quality healing. Overall, the CSN-CMC LBL films in this study showed considerable potential for application in infected wound healing.

Quantitative investigation of drug-drug interaction between bergenin and vilazodone in rats through UPLC-MS/MS assay

In this study, we firstly established and verified a method by ultra performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) for the analysis of vilazodone and its metabolite M10 in rat plasma, then this method was used to explore the pharmacokinetics of vilazodone and M10 present or absence of 80 mg/kg bergenin in rats. Protein precipitation with acetonitrile was used to prepare the samples in this research. The mobile phase for liquid chromatography was consisted of 0.1% formic acid aqueous solution and acetonitrile. Brexpiprazole was used as the internal standard (IS), and the multiple reaction monitoring (MRM) mode was used for detection. The verification items required by the US Food and Drug Administration (FDA) guidelines such as selectivity, sensitivity, linearity, stability, recovery and matrix effect of this method were all met the standards. Besides, rats were used to explore the drug-drug interaction between vilazodone and bergenin, which were divided into two groups, and separately gavaged with the same-volume of carboxymethyl cellulose sodium (CMC-Na) solution and 80 mg/kg bergenin, respectively. The results showed that bergenin significantly affected the metabolism of vilazodone. It suggested that there was a potential drug-drug interaction between bergenin and vilazodone in rats. In clinical application, we should pay attention to the dose of vilazodone when in combination with bergenin.

Effects of carboxymethyl cellulose concentration on mechanical, viscoelastic properties, and thermal properties of starch/plant fiber foaming tableware materials with foam structure

In this study, a novel bio-based composite of starch/plant fiber foaming tableware material was prepared by the hot-pressing foaming method. The influence of the content of carboxymethyl cellulos (CMC) as a new type of film-forming agent filler on the properties of foam materials was systematically investigated. The results showed that the foam material with 10 wt% CMC had excellent cell morphology and uniform cell size (the average cell size reached the minimum value of 465.7 μm), relatively high porosity (57.01%), and excellent thermal insulation properties (thermal conductivity: 0.0541 W/m·K). The tensile strength of foam increased from 4.289 MPa for 0 wt% CMC to 5.714 MPa for 10 wt% CMC loading. Similarly, the flexural strength also increased from 11.609 MPa to 15.719 MPa for the foam material with 10 wt% CMC. The thermal stability and viscoelastic properties of the foam material reached the highest after adding 10 wt% CMC. In addition, the increase of CMC content is beneficial to improve the oil resistance and biodegradability of the material. The research shows that CMC is an effective filler to improve the properties of starch/plant fiber foaming tableware materials, which can greatly promote the development of bio-based polymer foam materials.

Production of cellulase enzymes by &lt;i&gt;Bacillus&lt;/i&gt; sp and &lt;i&gt;Pseudomonas&lt;/i&gt; sp isolated from anthill soil

Cellulase turns the most widespread biopolymer and biologically sustainable resource, 'cellulose,' into reducing sugar. The study aimed at producing cellulase enzymes by bacteria isolated from anthill soil. Cellulase-producing bacteria were isolated from anthill soil using Carboxymethyl cellulose (CMC) medium. The isolates were screened for cellulase production by cultural, morphological, biochemical and sugar fermentation tests. Optimization of the fermentation medium for maximum cellulase production was carried out by one factor at a time (OFAT). Data obtained were analysed with the analysis of variance (ANOVA) using SPSS 2007, version 16.0. The identified Pseudomonas sp, Staphylococcus sp, E. coli and Bacillus sp were isolated with highest potential of cellulase production. The culture conditions like pH, temperature, carbon sources and nitrogen sources were optimized. The optimum conditions found for cellulase production were 40oC at pH 8.5 with maltose as carbon source and yeast extract as nitrogen source. The highest activity and stability of cellulase enzymes between neutral to alkaline pH and high temperature.

Wireless Sensor System Based on Organohydrogel Ionic Skin for Physiological Activity Monitoring.

Supermolecular hydrogel ionic skin (i-skin) linked with smartphones has attracted widespread attention in physiological activity detection due to its good stability in complex scenarios. However, the low ionic conductivity, inferior mechanical properties, poor contact adhesion, and insufficient freeze resistance of most used hydrogels limit their practical application in flexible electronics. Herein, a novel multifunctional poly(vinyl alcohol)-based conductive organohydrogel (PCEL5.0%) with a supermolecular structure was constructed by innovatively employing sodium carboxymethyl cellulose (CMC-Na) as reinforcement material, ethylene glycol as antifreeze, and lithium chloride as a water retaining agent. Thanks to the synergistic effect of these components, the PCEL5.0% organohydrogel shows excellent performance in terms of ionic conductivity (1.61 S m-1), mechanical properties (tensile strength of 70.38 kPa and elongation at break of 537.84%), interfacial adhesion (1.06 kPa to pig skin), frost resistance (-50.4 °C), water retention (67.1% at 22% relative humidity), and remoldability. The resultant PCEL5.0%-based i-skin delivers satisfactory sensitivity (GF = 1.38) with fast response (348 ms) and high precision under different deformations and low temperature (-25 °C). Significantly, the wireless sensor system based on the PCEL5.0% organohydrogel i-skin can transmit signals from physiological activities and sign language to a smartphone by Bluetooth technology and dynamically displays the status of these movements. The organohydrogel i-skin shows great potential in diverse fields of physiological activity detection, human-computer interaction, and rehabilitation medicine.

Inhibitory mechanism of carboxymethyl cellulose on advanced glycation end products in plant-based meat alternatives

Plant-based meat alternatives (PBMA) were detected with high advanced glycation end products (AGEs) levels in our previous study, threatening human health. In this study, carboxymethyl cellulose (CMC) exhibited excellent inhibitory effects on AGEs in both PBMA and chemical model systems. Moreover, the inhibitory effects were dependent on the levels of CMC addition. With 4% CMC addition, the contents of Nε-carboxymethy-L-lysine (CML) and Nε-carboxyethy-L-lysine (CEL) in PBMA decreased by 75% and 83%, respectively. Through comprehensive characterizations and high-resolution mass spectrometry analysis, three possible inhibitory pathways were proposed at the molecular level: CMC improved the thermal stability of soy protein isolates (SPI) via covalent bond; CMC occupied the amino reaction sites on SPI and competitively inhibited the reaction between SPI and glucose; CMC scavenged the intermediates of AGEs (i.e glyoxal and methylglyoxal). This research lays a theoretical foundation on the inhibition of AGEs in PBMA through the regulation of hydrocolloids.