Carboxymethyl Cellulose Research Articles

Multicomponent Synergistic Antibacterial Hydrogel Based on Gelatin-Oxidized Carboxymethyl Cellulose for Wound Healing of Drug-Resistant Chronic Infection.

Bacterial invasion hinders the healing process of wound, leading to the formation of chronic infected wound; meanwhile, the misuse of antibiotics has resulted in the emergence of numerous drug-resistant bacteria. The application of conventional antimicrobial methods and wound treatment techniques is not appropriate for wound dressings. In this paper, quaternized poly(vinyl alcohol) (QPVA) and pomegranate-like copper uniformly doped polydopamine nanoparticles (PDA@Cu) were introduced into a gelatin-oxidized carboxymethyl cellulose system to form a multicomponent synergistic antibacterial hydrogel (GOQ3P3). Polydopamine improves the biocompatibility and prevents the detachment of Cu nanoparticles. It can achieve synergistic antibacterial effects through quaternary ammonium salt-inorganic nanoparticle photothermal treatment under 808 nm near-infrared (NIR) irradiation. It exhibits highly efficient and rapid bactericidal properties against Escherichia coli, Staphylococcus aureus, and MRSA (methicillin-resistant Staphylococcus aureus) with an antibacterial rate close to 100%. The gel scaffold composed of macromolecules gives the hydrogel excellent mechanical properties, adhesive capabilities, self-healing characteristics, biocompatibility, and pH degradation and promotes cell adhesion and migration. In a full-thickness wound healing model infected with MRSA, GOQ3P3 controls inflammatory responses, accelerates collagen deposition, promotes angiogenesis, and enhances wound closure in the wound healing cascade reaction. This study provides a feasible strategy for constructing dressings targeting chronic infection wounds caused by drug-resistant bacteria.

Effect of cashew nut flour on hematological parameters of children living with HIV.

Aim: To assess the effect of cashew nut flour on the hematological parameters of children living with HIV-AIDS. Method: A 32-week randomized, blind clinical trial conducted at a specialized outpatient clinic. Children aged 2-12 years were allocated to intervention groups (IGs) (n = 11) receiving 12 g/day of cashew nut flour and control groups (CGs) (n = 9) receiving 12 g/day of carboxymethyl cellulose. Parameters of erythrocytes, leukocytes, platelets, and lipid profiles were evaluated. Results: In the IG, the elevation and reduction of leukocyte and lipid profile biomarkers, respectively, were not statistically significant (p > 0.05). A clinically and statistically significant increase in mean corpuscular hemoglobin concentration was observed in the CG (p = 0.018), with a large effect size (Cohen's d = 0.9). There were no statistically significant changes in platelet counts among participants (p = 0.18). The effect size for white blood cell count, low-density lipoprotein cholesterol, very low-density lipoprotein, and triglycerides was moderate in the IG compared to the CG. Conclusion: Cashew nut flour supplementation may increase levels of leukocytes and lipid profile parameters in children living with HIV. Brazilian Clinical Trials Registry (REBEC): U1111.1276.6591.

Enhanced Stability, Superior Anti-Corrosive, and Tribological Performance of Al2O3 Water-based Nanofluid Lubricants with Tannic Acid and Carboxymethyl Cellulose over SDBS as Surfactant

In this research work, the stability, tribological, and corrosion properties of a water-based Al2O3 nanofluid (0.5 wt%) formulated with tannin acid (TA) and carboxymethyl cellulose (CMC) as dispersants or surfactants were investigated. For comparative purposes, sodium dodecylbenzene sulfonate (SDBS) was also incorporated. The stability of the nanofluid was assessed through zeta potential measurements and photo-capturing, revealing the effectiveness of TA and CMC in preventing nanoparticle agglomeration. Tribological properties were examined using a pin-on-disk apparatus, highlighting the tribofilm of Al2O3 that enhanced lubricating properties of the nanofluid by the SEM, resulting in reduced friction and wear of the contacting surfaces. Sample with the addition of both TA and CMC exhibited the best tribological performance, with a ~ 20% reduction in the friction coefficient and a 59% improvement in wear rate compared to neat nanofluid without TA and CMC. Additionally, the corrosion resistance of the nanofluids were evaluated via weight loss and electrochemical impedance spectroscopy. The nanofluid sample containing both TA and CMC exhibited the lowest corrosion rate, with 97.6% improvement compared to sample without them. This study provides valuable insights into the potential applications of TA and CMC-based Al2O3 nanofluids as effective and environmentally friendly solutions for coolant or lubrication in cutting processes.

Development of Germinated-Brown-Rice-Based Novel Functional Beverage Enriched with γ-Aminobutyric Acid: Nutritional and Bio-Functional Characterization.

γ-aminobutyric acid (GABA), recognized as a primary inhibitory neurotransmitter within the brain, serves a crucial role in the aging process and in neurodegenerative conditions such as Alzheimer's disease. Research has demonstrated the beneficial effects of GABA, particularly for elderly individuals. Given that elderly individuals often encounter challenges with swallowing food, beverages designed to address dysphagia represent a preferable option for this demographic. Among the different processing techniques, the germination process triggers biochemical changes, leading to an increase in certain nutrients and bioactive compounds (e.g., GABA). Therefore, we attempted to develop a novel functional beverage utilizing germinated brown rice enriched with GABA and studied its nutritional and bio-functional characterization. The optimal conditions (X1, X2, X3 and X4.) were determined: powdered sugar (40 g), chocolate powder (20 g), sodium carboxymethyl cellulose (0.5 g), GBR (220 g), and water (440 mL). The results of storage studies indicated that the germinated-brown-rice-based beverage exhibited favorable nutritional attributes, including increased γ-oryzanol (52.73 ± 1.56%), total phenolic content (26.68 ± 1.56 mg GAE/100 g), niacin (5.17 ± 0.14%), and GABA (42.12 ± 0.63 mg/100 g) levels. Additionally, the beverage demonstrated notable antioxidant activity (74.23 ± 2.37 µmol TE/100 g), suggesting potential health-promoting effects. Sensory evaluation revealed satisfactory acceptability among consumers, highlighting its palatability. Overall, this study elucidates the development of a novel functional beverage utilizing germinated brown rice enriched with GABA, offering promising nutritional and bio-functional characteristics for health-conscious consumers.

Preparation of hydrogel using catechin-grafted chitosan and carboxymethyl cellulose

Preparation of hydrogel using catechin-grafted chitosan and carboxymethyl cellulose

Incidence of microplastic contamination in fishes of the Ramsar Wetland, Loktak – The world's only floating lake from the Indian Himalayan region

Microplastics are ubiquitous, and their widespread prevalence in the ecosphere has generated concerns about their potential effects on terrestrial and aquatic organisms. However, studies pertaining to ecologically sensitive freshwater ecosystems, such as Ramsar wetlands, is scarce. Therefore, the study was conducted in Loktak, the world's only floating lake, and one of the largest wetland in the Indian Himalayan region. The wetland's degradation and pollution have resulted its inclusion in the Montreux Record, underscoring the need for studying this eco-sensitive freshwater system. This work investigated the (i) abundance, morphotype and size of microplastics in fish, and (ii) chemical composition of the microplastics consumed and accumulated in the fish of Loktak lake. Fish samples representing eight species were collected and analyzed for microplastics. Results revealed that ∼91% of the sampled fish ingested microplastics. Fragment was identified as the predominant morphotype (∼82%). Plastic polymers including polyamide (PA), polystyrene (PS), polycarbonate (PC) and carboxymethyl cellulose (CMC) were detected. The occurrence of heavy metals - chlorine (Cl), palladium (Pd), sodium (Na), zinc (Zn), lead (Pb) and copper (Cu) suggests their adhesion on the microplastics. The occurrence of microplastics in fish indicates pollution in the lake and poses a potential health risks to humans through consumption. Therefore, implementing comprehensive management approaches is imperative to mitigate this emerging pollution and uphold the ecological integrity of the Ramsar site. Substantial information on microplastics and their potential human exposure through fish consumption, particularly in the Indian Himalayan region, remains to be assessed, underscoring the need for extensive study.

Assessment of mixing behaviors of non-Newtonian pseudoplastic fluids in short microdevices

Efficient chaotic microdevices have major importance across many potential applications in industrial processes and operations, which form essential parts of microfluidic devices. In microfluidics, The Two-Layer Crossing Channels Micromixer (TLCCM)exhibits notable characteristics in terms of mixing of Newtonian fluids which motivated us to compare it with other micromixers using pseudoplastic fluids. The examined micromixers are: L-Shape, OH, and OX. CFD code is utilized to numerically solve Navier-Stokes, the mass conservation and species transport equations. Therefore, the species transport model was selected to analyze the mixing process. The pseudoplastic fluids consist of carboxymethyl cellulose (CMC) solutions, which are characterized using the power-law model, the flow behavior index ranging from 0.49 to 1 and generalized Reynolds number (Reg) varies from 0.2 to 70. The effectiveness of mixing was assessed through the mixing degree across various cross-sectional areas. To address this, the analysis encompassed mass fraction contours, velocity profiles, streamlines, flow rates, and the associated mixing energy costs. Our findings report that the TLCCM micromixer presents the elevated mixing degree, where their obtained values vary between 0.80526 and 0.99765. It appears that the occurrence of secondary flows has an additional benefit to improve the mixing performances. Moreover, it requires less mixing energy costs versus other micromixers, where their values vary between 0.00036 and 0.49 W.

Exploring Sodium Carboxymethyl Cellulose as a Substitute for Cellulose Acetate: Fabrication and Potential Applications of a Porous Membrane

Exploring Sodium Carboxymethyl Cellulose as a Substitute for Cellulose Acetate: Fabrication and Potential Applications of a Porous Membrane

Functionalized corn stalk carboxymethyl cellulose and mesoporous silica SBA-15 composite hydrogel-immobilized lipase for the resolution of racemic ibuprofen ethyl ester

ABSTRACT The immobilization of enzymes is an important strategy to improve their stability and reusability. However, it often comes with a trade off of reduced biological activity and catalytic efficiency. In this study, a composite hydrogel based on corn stalk carboxymethyl cellulose, acrylic acid, and mesoporous silica SBA-15 was developed as a support for the immobilization of lipase from Pseudomonas S.P. (PSL). The surface morphology and functional properties of the composite hydrogels were investigated by scanning electron microscopy, Fourier transform infrared, X-ray diffraction and simultaneous thermal analyzer, respectively. The composite hydrogel materials had a large number of mesopores and macropores were present in the wall of the hydrogel sheet. The hydrogel had a network structure that reduced the diffusion resistance of the substrate and improved the accessibility of the enzyme. The immobilized PSL exhibited high enantioselectivity (E value: 88.2) and enzyme activity (316.8 µmol/g/min) in the preparation of (S)-ibuprofen by enzymatic hydrolytic resolution of racemic ibuprofen ethyl ester. This prepared novel composite hydrogel is a promising supporting matrix for the immobilization of enzymes.

Synthesis and characterization of composite films derived from lemongrass leaves: A valorization approach

Over the past few decades, research into more ecologically friendly packaging materials has significantly increased to reduce non-renewable plastic usage. In this context, biobased films were synthesized from extracted lemongrass leaves. An integrated pretreatment of conventional alkali followed by deep eutectic solvents (DES) was utilized to fractionate the lemongrass leaves into three usable forms, i.e., hemicellulose (HC), lignin (L), and cellulose, which were further utilized in the synthesis of composite films. A total of 4 films have been synthesized, labelled as: Film 1 (CMC HC), Film 2 (L HC), Film 3 (CMC L), and Film 4 (CMC HC L). Film 4 has shown a good water absorption capacity of nearly 65 % and also a higher contact angle of 99.90°, while film 2 has the highest thermal stability among all the films. Film 3 has better UV properties due to the presence of carboxymethyl cellulose (CMC) and lignin. Statement of noveltyIn the present work, composite films have been synthesized from lemongrass leaves for the first time. This is the first report that synthesizes the films from extracted components (CMC, lignin, and hemicellulose) of lemongrass leaves. In this study, all the components were extracted via sequential conventional alkali and DES pretreatment. After extraction, these components were utilized for the composite film synthesis, which is used for various applications of their desirable properties.

Sophorin mitigates flutamide-induced hepatotoxicity in wistar rats

Flutamide is frequently used in the management of prostate cancer, hirsutism, and acne. It is a non-steroidal anti-androgenic drug and causes hepatotoxicity. The current study's objective is to evaluate sophorin's hepatoprotective effectiveness against flutamide-induced hepatotoxicity in Wistar rats. Sophorin is a citrus flavonoid glycoside, also known as rutin, which is a low molecular weight polyphenolic compound with natural antioxidant properties and reported to have promising hepatoprotective efficacy. In this study, sophorin was used at a dose of 100 mg/kg body weight in purified water via oral route for 4 week daily whereas, flutamide was used at a dose of 100 mg kg/b.wt for 4 weeks daily in 0.5% carboxy methyl cellulose (CMC) through the oral route for the induction of hepatotoxicity. Flutamide administration leads to enhanced reactive oxygen species (ROS) generation, an imbalance in redox homeostasis and peroxidation of lipid resulted in reduced natural antioxidant level in liver tissue. Our result demonstrated that sophorin significantly abrogate flutamide induced lipid peroxidation, protein carbonyl (PC), and also significantly increasesed in enzymatic activity/level of tissue natural antioxidant such as reduced glutathione(GSH), glutathione reductase(GR), catalase, and superoxide dismutase(SOD). Additionally, sophorin reduced the activity of cytochrome P450 3A1 in liver tissue which was elevated due to flutamide treatment. Furthermore, sophorin treatment significantly decreased the pro-inflammatory cytokines (TNF-α and IL-6) level. Immunohistochemical analysis for the expression of inflammatory proteins (iNOS and COX-2) in hepatic tissue was decreased after sophorin treatment against flutamide-induced hepatotoxicity. Moreover, sophorin suppressed the infiltration of mast cells in liver tissue which further showed anti-inflammatory potential of sophorin. Our histological investigation further demonstrated sophorin's hepatoprotective function by restoring the typical histology of the liver. Based on the aforementioned information, we are able to come to the conclusion that sophorin supplementation might benefit wistar rats with flutamide-induced hepatic damage by reducing oxidative stress and hepatocellular inflammation.

Preparation of CMC-poly(N-isopropylacrylamide) semi-interpenetrating hydrogel with temperature-sensitivity for water retention

The CMC-PNIPAM hydrogel with semi-interpenetrating structure and temperature-sensitivity was prepared by in-situ polymerization of N-isopropylacrylamide (NIPAM) in sodium carboxymethylcellulose (CMC) solution at room temperature. The mass ratio of CMC to NIPAM was a key factor influencing the network structure and property of CMC-PNIPAM hydrogel. The low critical phase transition temperature (LCST) of CMC-PNIPAM hydrogels increased from 34.4 °C to 35.8 °C with the mass ratio of CMC to NIPAM rising from 0 to 1.2. The maximum compressive stress of CMC-PNIPAM hydrogel reached to 26.7 kPa and the relaxation elasticity was 52 % at strain of 60 %. The viscoelasticity of CMC-PNIPAM hydrogel was consistent with the generalized Maxwell model. The maximum swelling ratio in deionized water was 170.25 g·g−1 (dried hydrogel) with swelling rate of 2.57 g·g−1·min−1 at 25 °C. CMC-PNIPAM hydrogel hardly absorbed water above LCST, but the swollen hydrogel could release water at the rate of 0.36 g·g−1·min−1 once exceeding LCST. The test of water retention showed that soil mixed with 2 wt% dried CMC-PNIPAM hydrogel could retain 13.08 wt% water after 30 days at 25 °C that was 4.4 times than that of controlled soil without CMC-PNIPAM hydrogel. The semi-interpenetrating CMC-PNIPAM hydrogel showed a potential to conserve water responding to temperature.

Confirmation of radiation interaction with high‐Z metal‐quercetin complex to utilize factor for radiation protection materials

A high‐Z metal‐quercetin complex‐based material is developed by combining Hf, Ta, and Eu with quercetin (Qu) from a flavonoid series to apply to radiation protection materials. To demonstrate radiation energy absorbance, we utilize a polymer blend composed of carboxymethyl cellulose (CMC) and polyvinylpyrrolidone (PVP) as a matrix. This eco‐friendly film can be easily prepared by simply mixing it with the M‐Qu complex and the CMC‐PVP polymer blend. The possibility of radiation energy absorbance by the M‐Qu complex is confirmed through an analysis of the X‐ray energy absorption dose change rate. In addition, the radiation resistance characteristics of each film sample are measured using high‐energy electron‐beam irradiation. The results show that the Ta‐containing Qu complex has a high capability for UV energy downshift, X‐ray radiation absorption, and stability against electron‐beam radiation. This indicates that the material in question has the potential to serve as a superior radiation protection material for broad‐spectrum radiation energy. Also, it could effectively offer remarkable stability making it a compelling option for radiation‐resistant applications.

Interlayer and surface characteristics of carboxymethyl cellulose and tetramethylammonium modified bentonite

This study aims to evaluate interlayer and surface characteristics of carboxymethylcellulose (CMC) and tetramethylammonium (TMA) modified bentonite, named as TCMB, as a potential material in contamination containment systems. The study employed a variety of experimental methods, including zeta-potential, scanning electron microscopy, X-ray diffraction (XRD), transmission electron microscopy, and Fourier transform infrared spectroscopy (FTIR), along with molecular dynamics (MD) simulations. Zeta potential results revealed increased electronegativity in TCMB compared to the conventional bentonite. By forming three-dimensional hydrogel networks capable of filling inter clusters pore spaces, CMC effectively maintained the low hydraulic conductivity of TCMB. XRD results confirmed the presence of TMA in the interlayer of montmorillonite. MD simulations and FTIR analyses validated the successful adsorption of CMC and TMA, which can be jointly attributed to hydrogen bonds between hydroxyl groups in CMC and the surface oxygen of montmorillonite, and electrostatic attraction between TMA and montmorillonite. The comparatively weak bonding between CMC and montmorillonite may facilitate CMC elution in the TCMB exposed to aggressive permeants. Furthermore, the electrical double layer thickness of TCMB and CB was estimated as 31.54 Å and 18.76 Å, respectively. Overall, the CMC and TMA treatments effectively enhance the suitability of bentonite for contamination containment applications.

New Regenerative and Anti-Aging Medicine Approach Based on Single-Stranded Alpha-1 Collagen for Neo-Collagenesis Induction: Clinical and Instrumental Experience of a New Injective Polycomponent Formulation for Dermal Regeneration.

This study explores the efficacy of a novel polycomponent formulation (KARISMA Rh Collagen® FACE, Taumedika Srl, Rome, Italy), containing 200 mg/mL of non-crosslinked high-molecular-weight hyaluronic acid (HMW-HA), 200 μg/mL of a human recombinant polypeptide of collagen-1 alpha chain, and 40 mg/mL of carboxymethyl cellulose (CMC) as a regenerative medicine for skin regeneration and rejuvenation. This formulation combines non-crosslinked high-molecular-weight hyaluronic acid, human recombinant polypeptide of collagen-1 alpha chain, and carboxymethyl cellulose to stimulate collagen type I production and enhance skin hydration. This study involved 100 subjects with varying skin conditions, divided into three groups based on skin aging, smoking history, and facial scarring, to evaluate the product's effectiveness in skin regeneration and aesthetic improvement. The methodology included two injections of Karisma (2 mL for each injection) one month apart, with evaluations conducted using FACE-Q questionnaires, the SGAIS Questionnaire, and Antera 3D skin scanner measurements at baseline, 30 days, and 60 days post-treatment. The results demonstrated a significant reduction in skin roughness and an improvement in skin quality across all the groups, with no correlation between the outcomes and the patient's age. The subjective assessments also indicated high satisfaction with the treatment's aesthetic results. The analyzed data allow us to conclude that the single-stranded collagen with hyaluronic acid and carboxymethyl-cellulose formulation is able to stimulate the skin's regenerative response, yielding significant results both in vitro and, through our study, also in vivo. This new polycomponent formulation effectively stimulates skin regeneration, improving skin quality and texture, with significant aesthetic benefits perceived by patients, and a low incidence of adverse events, marking a promising advancement in regenerative medicine.

Biosynthesis of CuO@Au NPs and Its Formulated into Biopolymers Carboxymethyl Cellulose and Chitosan: Characterizations, Antimicrobial, Anticancer and Antioxidant Properties

Biosynthesis of CuO@Au NPs and Its Formulated into Biopolymers Carboxymethyl Cellulose and Chitosan: Characterizations, Antimicrobial, Anticancer and Antioxidant Properties

Protocatechuic acid as an inhibitor of lipid oxidation in meat

Lipid oxidation is the principal driver of meat and meat product deterioration during shelf life, causing the loss of fresh meat color, flavor, and aroma. Currently, synthetic antioxidants are used to prevent oxidation, but increasing consumer demand for natural ones leaves the industry with few alternatives. In this study, protocatechuic acid (PCA), known to have high antioxidant activity, was evaluated as a potential inhibitor of meat lipid oxidation. For this purpose, the antioxidant capacity and lipoxygenase (LOX) inhibitory activity of PCA were evaluated in vitro, and a set of four experiments was conducted, treating minced meat with water (control), lactic acid (LA), rosmarinic acid (RA) and PCA, at different concentrations (1–12 mg mL−1), depending on the experiment. The potential antioxidant effect of PCA when applied to meat cubes was also evaluated, as well as the potential of carboxymethyl cellulose (CMC) as a delivery system for PCA. The in vitro results showed that PCA is a potent antioxidant and an effective LOX inhibitor at 1 mg mL−1. PCA effect on meat lipid oxidation prevention was dose-dependent, and at 2 mg mL−1, it inhibited color change by 50% and lipid peroxidation by up to 70% when compared to water-treated samples, performing better than RA at 0.25 mg mL−1. These results suggest that PCA is a promising molecule to the meat industry as a natural preservative for meat and meat products directly or in a formulation.

Isolation, screening and characterization of efficient cellulose-degrading fungal and bacterial strains and preparation of their consortium under in vitro studies.

In this investigation, cellulose-degrading fungi and bacteria were isolated from different partially decomposed cellulose-rich substrates, such as groundnut residues, rice straw, and rotten wood, following dilution plating techniques on carboxymethyl cellulose agar media and screening for potential cellulose degradation ability. The development of a clear halo zone surrounding the microbial colonies during the initial screening process using the Congo red test (20 isolates) suggested cellulose hydrolysis, and the highest cellulase production activity was implied by the isolates with the largest clear zone ratio (9 isolates). Using both macroscopic and microscopic examinations, as well as standard biochemical tests outlined in Bergey's Manual of Determinative Bacteriology, the genus-level identification of fungi and bacteria was accomplished. In order to molecularly identify the 4 isolatedfungal and bacterial strains at the species level after being ultimately selected for cellulase production potential under in vitro studies, fungal and bacterial DNA was extracted and amplified by PCR using the universal primers ITS1 and ITS4 for fungi (ITS rRNA, 5.8S rRNA) and 8F and 1492R for bacterial isolates (16S rRNA). After sequencing, the PCR results were compared to other comparable sequences in GenBank (NCBI). Based on the available NCBI data, phylogenetic analysis of their ribosomal gene partial sequences revealed that DAJ2 (PP086700) shares 100% homology with Aspergillus foetidus, DTJ4 (PP086699) shares 99.74% similarity with Trichoderma atrobrunnium, DBJ6 (PP082584) shares 100% identity with Priestia megaterium, and DMB9 (PP082585) shares 99.88% homology with Micrococcus yunnanensis. The cellulolytic potential of Phanerochaete chrysosporium is well established. Therefore, it was considered a standard culture for comparison and was collected from the MTCC, Chandigarh, India. Overall, all 4 selected isolates and the check organism were mutually compatible or synergistic with each other, and their consortium is useful for the accelerated decomposition of organic constituents during rapid composting.

Extraction and Characterization of Cellulose from Broccoli Stems as a New Biopolymer Source for Producing Carboxymethyl Cellulose Films.

The use of food and agricultural waste-derived carboxymethyl cellulose (CMC) has become of interest due to their biodegradability and cost-effectiveness. In the current research, cellulose was extracted from broccoli stems to produce carboxymethyl cellulose using a carboxymethylation reaction via chloroacetic acid (CAA) and sodium hydroxide (5-10 M). The effects of different synthesis conditions on the degree of substitution (DS) and viscosity of the synthesized CMC powder were investigated. The mechanical properties, water vapor permeability (WVP), and colour of CMC films were also evaluated. The results showed that CMC with the highest DS value (0.60) and the highest viscosity of 0.5 Pa·s could be synthesized from broccoli stems at a concentration of 7.5 M NaOH and a cellulose-to-chloroacetic acid ratio of 1 : 1.2. At CMC concentration of 4 g/100 mL with 0.8 g/100 mL of glycerol, the films had the highest tensile strength (31.91 MPa), whereas with 1.2 g/100 mL glycerol, more flexible films with elongation at break of 27.56% were produced. CMC films with the highest WVP (7.87 × 103 gm2·mmHg-1/day) were made with 6 g/100 mL of CMC and 1.8 g/100 mL of glycerol. This research proposes a new source of cellulose to produce biodegradable packaging materials to initiate a practical basis for food waste reuse.

Bio-synthesized TiO2 nanoparticles and the aqueous binder-based anode derived thereof for lithium-ion cells.

Titanium dioxide nanoparticles (TiO2-NPs) are a promising anode material for Lithium-ion batteries (LIBs) due to their good rate capability, low cost, non-toxicity, excellent structural stability, extended cycle life, and low volumetric change (∼4%) during the Li+insertion/de-insertion process. In the present paper, anatase TiO2-NPs with an average particle size of ~ 12nm were synthesized via a green synthesis route using Beta vulgaris (Beetroot) extract, and the synthesized TiO2-NPs were evaluated as anode material in LIBs. Furthermore, we employed an aqueous binder (1:1 mixture of carboxy methyl cellulose and styrene butadiene) for electrode processing, making the process cost-effective and environmentally friendly. The results revealed that the Li/TiO2 half-cells delivered an initial discharge capacity of 209.7 mAh g-1 and exhibited superior rate capability (149 mAh g-1 at 20 C) and cycling performances. Even at the 5C rate, the material retained a capacity of 82.2% at the end of 100 cycles. The synthesis route of TiO2-NPs and the aqueous binder-based electrode processing described in the present work are facile, green, and low-cost and are thus practically beneficial for producing low-cost and high-performance anodes for advanced LIBs.