Carbon Content Research Articles

Experimental Study on the Ignition Behavior of Wildland Fuels Ignited by Heated Stainless-Steel Particles

ABSTRACT Hot metal particles from activities like machining, grinding, and welding are significant ignition sources for wildland fuels. Thus, this study examines the effects of stainless-steel particle geometries and wildland fuel beds on wildfire ignition behavior. To this purpose, experiments have been conducted to investigate the impact of particle type, composition, diameter, number, and wildland fuel bed species on ignition behavior. Three common California wildland grass fuel species were studied: Bromus (Bromus diandrus), Tall Wheatgrass (Thinopyrum ponticum), and Avena Wildoats (Avena fatua). Various stainless-steel grades were tested as ignition particles. The findings from this study support prior research and indicate that increasing the quantity and diameter of ignition particles reduces ignition temperature and affects the type of ignition (flaming, smoldering, or none). Moreover, results from this study showed that decreasing the carbon content in stainless steel may lower the temperature required to reach wildland fuel ignition. In addition, wildland fuel species influenced ignition type and temperature. For instance, Bromus fuels had the lowest flaming ignition temperature at 320°C whereas Tall Wheatgrass and Avena ignited at 400°C and 380°C, respectively. Flaming ignition was primarily observed in Bromus fuels, while Avena and Tall Wheatgrass primarily supported smoldering ignition. This work asserts that species-specific fuel morphology, chemical, and thermal properties affect the flammability of grassy fuels when these are ignited by metal particles and observes that in addition to particle geometry, the chemical properties of ignition particles, such as carbon content, may also lay a key role in shapping ignition behavior.

Long-term Application of Agricultural Amendments Regulate Hydroxyl Radicals Production during Oxygenation of Paddy Soils.

Hydroxyl radicals (•OH) play a significant role in contaminant transformation and element cycling during redox fluctuations in paddy soil. However, these important processes might be affected by widely used agricultural amendments, such as urea, pig manure, and biochar, which have rarely been explored, especially regarding their impact on soil aggregates and associated biogeochemical processes. Herein, based on five years of fertilization experiments in the field, we found that agricultural amendments, especially coapplication of fertilizers and biochar, significantly increased soil organic carbon contents and the abundances of iron (Fe)-reducing bacteria. They also substantially altered the fraction of soil aggregates, which consequently enhanced the electron-donating capacity and the formation of active Fe(II) species (i.e., 0.5 M HCl-Fe(II)) in soil aggregates (0-2 mm), especially in small aggregates (0-3 μm). The highest contents of active Fe(II) species in small aggregates were mainly responsible for the highest •OH production (increased by 1.7-2.4-fold) and naphthalene attenuation in paddy soil with coapplication of fertilizers and biochar. Overall, this study offers new insights into the effects of agricultural amendments on regulating •OH formation in paddy soil and proposes feasible strategies for soil remediation in agricultural fields, especially in soils with frequent occurrences of redox fluctuations.

The impact of insect herbivory on biogeochemical cycling in broadleaved forests varies with temperature

Herbivorous insects alter biogeochemical cycling within forests, but the magnitude of these impacts, their global variation, and drivers of this variation remain poorly understood. To address this knowledge gap and help improve biogeochemical models, we established a global network of 74 plots within 40 mature, undisturbed broadleaved forests. We analyzed freshly senesced and green leaves for carbon, nitrogen, phosphorus and silica concentrations, foliar production and herbivory, and stand-level nutrient fluxes. We show more nutrient release by insect herbivores at non-outbreak levels in tropical forests than temperate and boreal forests, that these fluxes increase strongly with mean annual temperature, and that they exceed atmospheric deposition inputs in some localities. Thus, background levels of insect herbivory are sufficiently large to both alter ecosystem element cycling and influence terrestrial carbon cycling. Further, climate can affect interactions between natural populations of plants and herbivores with important consequences for global biogeochemical cycles across broadleaved forests.

A systematic benchmarking framework for future assessments of soil health: An example from Denmark

Based on current evidence and established critical thresholds for soil degradation indicators, it is concerning that over 60–70% of European soils are unhealthy due to unsustainable management and the impact of climate change. Despite European and national efforts to improve soil health, significant gaps remain. The proposal for a Soil Monitoring and Resilience Law, to be implemented by the European Union, seeks to establish a framework for soil monitoring and promote sustainable management practices to achieve healthy soils by 2050. This requires extensive data collection and soil monitoring systems to accurately estimate soil health across Europe, considering the diversity of soil types, climates, and land uses. To establish a framework for soil monitoring, we must understand the site-specific status of soil and the ranges of soil health indicators across specific pedoclimatic regions. In our study, we evaluated the soil status in agricultural areas in Denmark using soil health indicators and a site-specific benchmarking approach. We compiled nationally representative datasets, combining point and model-informed data of soil parameters such as organic carbon content, bulk density, pH, electrical conductivity, clay-to-soil organiccarbon ratio, water erosion, and nitrogen leaching. By categorizing Danish agricultural soils into monitoring units based on textural classes, landscape elements, and wetland types, we calculated benchmarks for these indicators, considering different cropping systems. Our approach provided detailed point-based results and a spatially explicit overview of the status of soil health indicators in Denmark. We identified areas where soil deviates from the benchmarks of different indicators. Such deviations might indicate soil functions operating outside the normal range, posing potential threats to soil health. This proposed framework could support the establishment of a baseline for assessing the directionality of future changes in soil health. Moreover, it is adaptable for implementation by other countries to support assessments of soil health.

MSA-Net: A Precise and Robust Model for Predicting the Carbon Content on an As-Received Basis of Coal

The carbon content as received (Car) of coal is essential for the emission factor method in IPCC methodology. The traditional carbon measurement mechanism relies on detection equipment, resulting in significant detection costs. To reduce detection costs and provide precise predictions of Cars even in the absence of measurements, this paper proposes a neural network combining MLP with an attention mechanism (MSA-Net). In this model, the Attention Module is proposed to extract important and potential features. The Skip-Connections are utilized for feature reuse. The Huber loss is used to reduce the error between predicted Car values and actual values. The experimental results show that when the input includes eight measured parameters, the MAPE of MSA-Net is only 0.83%, which is better than the state-of-the-art Gaussian Process Regression (GPR) method. MSA-Net exhibits better predictive performance compared to MLP, RNN, LSTM, and Transformer. Moreover, this article provides two measurement solutions for thermal power enterprises to reduce detection costs.

The Effect of Wood Species on Fine Particle and Gaseous Emissions from a Modern Wood Stove

Residential wood combustion (RWC) is a significant source of gaseous and particulate emissions causing adverse health and environmental effects. Several factors affect emissions, but the effects of the fuel wood species on emissions are currently not well understood. In this study, the Nordic wood species (named BirchA, BirchB, Spruce, SpruceDry, Pine and Alder) were combusted in a modern stove, and the emissions were studied. The lowest emissions were obtained from the combustion of BirchA and the highest from Spruce and Alder. The fine particle mass (PM2.5) was mainly composed of elemental carbon (50–70% of PM2.5), which is typical in modern appliances. The lowest PAH concentrations were measured from BirchA (total PAH 107 µg/m3) and Pine (250 µg/m3). In the ignition batch, the PAH concentration was about 4-fold (416 µg/m3). The PAHs did not correlate with other organic compounds, and thus, volatile organic compounds (VOCs) or organic carbon (OC) concentrations cannot be used as an indicator of PAH emissions. Two birch species from different origins with a similar chemical composition but different density produced partially different emission profiles. This study indicates that emission differences may be due more to the physical properties of the wood and the combustion conditions than to the wood species themselves.

Effect of Different Levels of NPK, Biochar and Azotobacter on Physico-chemical Properties of Soil on Cowpea (Vigna unguiculata)

In light of this, the following goals are present in the experiment "Effect of Different Levels of NPK and Biochar, Azotobacter on Physico-chemical Properties of Soil and Yield Attributes of Cowpea to calculate the impact of various NPK, Biochar, and Azotobacter dosages on the physical-chemical characteristics of soil. An excavated soil sample from the experimental site revealed that the land topography ranged from nearly level to sloped by 1% to 6%, with soil area falling into the Inceptisol order. The soil texture was sandy loam, with sand percentages of 62.65%, silt percentages of 21.09, and clay percentages of 16.26. The pH of soil was 6.89, and its electrical conductivity (EC) was non-saline (0.42 ds m-1). Organic carbon content was low to medium, available nitrogen was low to medium (280.78 kg ha-1), available phosphorus was 17.34 kg ha-1, and available potassium was 168.16 kg ha-1. Two factors with three levels of @NPK 0, 50, and 100% ha-1, three levels of @Biochar 0, 50, and 100% ha-1, and a randomized block design were used in the statistical analysis. During field testing, nine different treatments were used; the best outcomes were significant. The results indicate that the physical and chemical parameters of the soil, including the cumulative mean values for bulk density (1.39 and 1.41 mg m-3), particle density (2.46 and 2.47 mg m-3), and soil pH (6.89 and 6.91), attained their maximum in T1 (Absolute control) at depths of 0-15 cm and 15-30 cm, respectively. Additionally, the percentage pore space was found to be 48.22% and 47.39%, and the water holding capacity was found to be 44.14% and 45.34%), electrical conductivity (EC) was measured at 0.49 ds m-1 and 0.52 ds m-1, the percentage of organic carbon was determined to be 0.40%), and the available nitrogen was found to be (299.78 kg ha-1 and 295.76 kg ha-1, available phosphorus was (23.78 kg ha-1 and 21.98 kg ha-1), and the available potassium was (179.25 kg ha-1 and 176.56 kg ha-1).

Aspergillus niger as an efficient biological agent for separator sludge remediation: two-level factorial design for optimal fermentation

Background The booming palm oil industry is in line with the growing population worldwide and surge in demand. This leads to a massive generation of palm oil mill effluent (POME). POME is composed of sterilizer condensate (SC), separator sludge (SS), and hydro-cyclone wastewater (HCW). Comparatively, SS exhibits the highest organic content, resulting in various environmental impacts. However, past studies mainly focused on treating the final effluent. Therefore, this pioneering research investigated the optimization of pollutant removal in SS via different aspects of bioremediation, including experimental conditions, treatment efficiencies, mechanisms, and degradation pathways. Methods A two-level factorial design was employed to optimize the removal of chemical oxygen demand (COD) and turbidity using Aspergillus niger. Bioremediation of SS was performed through submerged fermentation (SmF) under several independent variables, including temperature (20–40 °C), agitation speed (100–200 RPM), fermentation duration (72–240 h), and initial sample concentration (20–100%). The characteristics of the treated SS were then compared to that of raw sludge. Results Optimal COD and turbidity removal were achieved at 37 °C 100 RPM, 156 h, and 100% sludge. The analysis of variance (ANOVA) revealed a significant effect of selective individual and interacting variables (p < 0.05). The highest COD and turbidity removal were 97.43% and 95.11%, respectively, with less than 5% error from the predicted values. Remarkably, the selected optimized conditions also reduced other polluting attributes, namely, biological oxygen demand (BOD), oil and grease (OG), color, and carbon content. In short, this study demonstrated the effectiveness of A. niger in treating SS through the application of a two-level factorial design.

Assessment of the Influence of zaï, Stone Rows, and Organo-mineral Fertiliser on Soil Properties and Groundnut Yields Performances in Sudan Sahelian Zone of Burkina Faso

Groundnut occupies a vital position in oilseed crop production in Burkina Faso, with current production at 630,526 tonnes. However, its production faces threats from drought and low soil fertility. This study aims to determine the influence of zaï, stone rows, ridge tillage, and mineral fertilisation on soil health and on groundnut yields performances in Sudan Sahelian zone of Burkina Faso. Experimental treatments were distributed randomly following a Fisher block design, comprising four treatments and five replications, in the village of Sandogo. Data on soil properties, plant growth, and yields were analysed using variance analysis in R software. The results indicate significant influences of the treatments on carbon content, nitrogen content, phosphorus content, pH values, soil moisture content, soil carbon dioxide release, and soil macrofauna. Moreover, notable effects were observed on the number of nodules, drier nodule weight, number of leaves and branches, pod load, pod and straw yields, and the weight of 100-pods. The highest carbon content (0.857; 0.861%), nitrogen content (0.081%; 0.087%), phosphorus content (7.488; 7.735 mg.kg-1), pH values (6.43; 6.54), and soil moisture content (24.80; 25.27%) were recorded in the homogeneous group of zaï and zaï associated to stone rows. The highest carbon dioxide release (2863.33 ppm) was recorded in plots treated with stone rows. Ants were the most widely encountered macrofauna, whereas no earthworms were recorded. The highest performance in terms of the number of nodules (84.76; 87.88), dry nodule weight (0.0893; 0.0886 g/plant), number of leaves (40; 40), number of branches (6; 6), pod load (25; 25), weight of 100-pods (112.90; 111.98 g), straw yields (1673.28; 1664.87 kg.ha-1), and pod yields (2122.32; 2161.96 kg.ha-1) were achieved with zaï and zaï combined with stone rows. Zaï and zaï combined with stone rows can therefore be used as effective alternatives to improve groundnut production in the Sudan Sahelian zone of Burkina Faso in a context of climate change, while protecting the environment.

Effects of Land Use Change on Soil Aggregate Stability and Erodibility in the Karst Region of Southwest China

Differences in land use type and chronological age affect soil properties and plant community characteristics, which may influence soil structural stability and erodibility. However, knowledge on the effects of soil physicochemical properties on soil aggregate stability and erodibility at different land use years is limited. This study selected five land use types: corn field (Year 38th-y), corn intercropped with cabbage field (Year 38th-y + b), fruit and meridian forest (Year 6th-jgl), naturally restored vegetation (Year 6th-zr), and artificial forest (Year 7th-rgl) in the karst landscape of the Chishui River Basin in Yunnan Province. We aimed to identify the influencing factors of soil stability and erodibility under different land use time series. The results indicated that the mean weight diameter (MWD), the geometric mean diameter (GMD), and soil structural stability index (SSI values) were highest in Y6th-zr and lowest in Y7th-rgl. Conversely, the erodibility K value was lowest in Y6th-zr, suggesting that the soil structure in Y6th-zr exhibited greater stability, whereas soil stability in Y7th-rgl was lower. Redundancy and throughput analyses revealed that organic carbon and water-stable aggregates > 2.0 mm content had higher vector values. Soil bulk density, total nitrogen, organic carbon, and soil texture content were the main factors contributing to soil stability variation (0.338–0.646). Additionally, total nitrogen, organic carbon, total phosphorus, and soil texture content drove the variation in K values (0.15–1.311). Natural vegetation restoration measures can enhance soil structure to a certain extent. These findings highlight changes in soil aggregate stability and erodibility over different land use durations. The research results have important theoretical and practical significance for understanding the differences in soil erosion and soil restoration under different land use patterns in the karst landscapes of southwest China.

Deficit Irrigation as an Effective Way to Increase Potato Water Use Efficiency in Northern China: A Meta-Analysis

Water scarcity poses a significant threat to the sustainable production of crops in Northern China. Despite this, the effect of water management practices, such as deficit irrigation, on the yield and WUE of potatoes has been rarely explored. Based on the meta-analysis of field experiment data, this study evaluated the influence of deficit irrigation on potato yield, evapotranspiration (ET), water use efficiency (WUE) and irrigation water use efficiency (IWUE) under variable soil types, water-saving ratio, irrigation methods, soil organic carbon (SOC) content, and fertilizer rate in Northern China. Here, we determined that potato WUE and IWUE were significantly increased by 10.0 and 31.6%, respectively, under deficit irrigation, while ET was significantly decreased by 26.3% compared to full irrigation. Conclusively, deficit irrigation significantly reduced potato yields by 16.4% compared to full irrigation. Furthermore, SOC content played a vital role in improving the WUE and alleviating potato yield losses under deficit irrigation. Our study suggested that maximum WUE with lower potato yield losses under deficit irrigation can be achieved in the Central Plains region of China or in yellow loam soil, brown soil, and meadow soil under alternate root-zone irrigation when the water-saving ratio was less than 45% and fertilizer application rates were 300 kg N ha−1, >240 kg P2O5 ha−1, and 181–300 kg K2O ha−1. Overall, these findings highlight the need for a comprehensive understanding of various agricultural management practices and local environmental conditions to optimize the benefits of deficit irrigation in potato-growing regions across Northern China.

Response of tomato to innovative organo-mineral fertilizers

Organo-mineral fertilizers (OMFs) with low organic carbon (Corg) content have been associated with higher mineral fraction nutrient use efficiency. However, the extraction of peat, which is typically used in these OMFs, from endangered ecosystems causes long-time stored Corg to mineralize and to be released back into the atmosphere as carbon dioxide (CO2). This study analyzes the replacement of peat in OMFs with biowaste materials. These materials, considered organic byproducts that microorganisms and other living things can decompose through composting and aerobic or anaerobic digestion, offer a viable opportunity. This study investigated three stabilized biowastes—green compost (GC) from pruning residues, municipal solid waste compost (MSWC), and manure-based vermicompost (VC)—as the organic matrices for granular OMFs. These matrices were impregnated with dissolved ammonium sulfate and urea and used to coat diammonium phosphate granules. Each biowaste OMF contained 7.5% Corg, 20% mineral N, and 10% mineral P2O5 (OMF20 − 10). Fertilizers with high nutrient concentrations have the advantage of requiring low application volumes, facilitating their application in the field. Biowaste OMFs were compared with peat OMFs with the same Corg-N-P2O5 concentration. Peat and MSWC were also used to create OMFs containing 7.5% Corg, 10% mineral N, and 5% mineral P2O5 (OMF10 − 5). A 75-day tunnel trial was conducted under semi-controlled conditions using tomato plants (Solanum lycopersicum L.) fertilized to an equivalent of 81 mg N kg−1 soil and 18 mg P kg−1 soil. Controls included no fertilization (N0P0) and mineral N and P fertilization (MFNP). The Soil Plant Analysis Development (SPAD) chlorophyll meter and the BBCH (from German Biologische Bundesanstalt, Bundessortenamt und CHemische Industrie) scale as well as the number of shoots were measured over time, as berry and total aboveground yield, N and P uptakes, and N and P use efficiencies (NUE and PUE, respectively) were calculated at harvest. All treatments outperformed the control N0P0 in most indicators. Peat20 − 10 did not have more berry yield than other OMF20 − 10; however, the higher number of shoots indicated a higher potential yield in the event of prolonging the experiment. At the end of 75 days, VC20 − 10 and MSWC20 − 10 showed similar PUE to peat, suggesting that those materials can be used as replacements. In the case of OMF10 − 5, MSWC10 − 5 had yield and N and P uptakes like peat OMFs, confirming the potential use of MSWC as peat replacement even at different nutrient concentrations. This research provides reassuring evidence of the effectiveness of biowaste OMFs, offering a positive outlook for sustainable agriculture. However, their use is not recommendable for short growing seasons.

Carbon evolution and mixing effects on groundwater age calculations in fractured basalt, southwestern Idaho, U.S.A.

Using hydrochemical and isotopic compositions of springs and wells, we trace carbon from critical zone carbon dioxide (CO2) into groundwater of the semi-arid Reynolds Creek Experimental Watershed - Critical Zone Observatory, southwestern Idaho, USA. Dissolved inorganic carbon (DIC) concentrations, pH and stable isotope tracers of carbon for DIC (δ13CDIC), are used to show that most groundwater evolves under open system conditions, moving carbon into the groundwater and acting as a carbon sink. However, one sample (−10.94‰ δ13CDIC, 6,350 14C years before present (yrs. BP)) may have evolved under closed system conditions with a higher partial pressure of critical zone CO2 than present-day soils. By characterizing the carbon cycle, we show that (1) carbon evolution is primarily under open-system conditions, (2) shallow groundwater samples are generally less mixed and more recent (10 to 70 3H yrs. BP) than deeper groundwater samples (1,469 to 6,350 14C yrs. BP), and (3) the older portion of the groundwater may be even older than the calculated 14C ages, as indicated by the mixing of age tracers in intermediate wells. Our global conception of the deep critical zone should include carbon cycling of critical zone CO2 in old groundwater. Characterizing the deep critical zone in a semi-arid weathered silicate watershed improves our global understanding of carbon, nutrient and water cycling.

Multilayer Diamond‐Like Carbon Films on Monocrystalline Diamond

Multilayer films of diamond‐like carbon (DLC) on monocrystalline diamond substrates have been for the first time obtained by plasma‐chemical deposition. Their chemical composition and structural and morphological properties are studied. The DLC individual layers differ in their sp3 carbon content. The multilayer nature of the resulting coatings is confirmed by periodic density modulation on the small‐angle X‐ray reflectometry curve and modulations in the CsC8, CsC6, CsC4 lines on the crater depth profile of secondary ions of elements (secondary ion mass spectrometry). The dependence of the deposition rate of multilayer DLC films on diamond, their composition and properties on the argon additive to the reaction gas mixture, as well as on methane flow, pressure and growth time, are studied.

Comparative study of fillers for welding E410 structural steel

ABSTRACT An endeavour for creating an understanding of the effect of filler wires (ER-70S6 and ER-80SG) on the mechanical performance of metal inert gas (MIG) weldments of two E410 graded structural steels that differed majorly in carbon contents i.e. 0.04 wt.%C and 0.17 wt.%C was undertaken. Improvements in yield stress (YS) with ER-80SG for MIG weldments of both investigated E410 structural steels were noticed; however, %elongation and room temperature (RT) impact toughness deteriorated as regards to ER-70S6. Almost ⁓5% increase in YS and a drop by ⁓4%, ⁓22%, and ⁓60% in ultimate tensile stress (UTS), %elongation, and toughness, correspondingly, were obtained for 0.04 wt.%C structural E410 steel with ER-80SG over ER-70S6. While moderate ⁓9% and ⁓8% increments in YS and UTS and a decrement of ⁓7% and ⁓40% in %elongation and toughness, respectively, were observed for 0.17 wt.%C steel with ER-80SG over ER-70S6. Enhancement in YS and a fall in %elongation and toughness with ER-80SG compared to ER-70S6 were due to high heat input for performing MIG welding of E410 steel, leading to thorough phase transformations providing fine Widmanstätten ferrite and acicular ferrite structures in weld metal with variable-sized inclusions and dissolved cementite and pearlite sub-structures in heat affected (HAZ) subzones of 0.04 wt.%C and 0.17 wt.%C steels, respectively.

Mapping of hydrocarbon condensation onset temperature and its sensitivity analysis for Exhaust Gas Recirculation (EGR) cooler

Exhaust Gas Recirculation (EGR) cooling technology is one of the key technologies of the engine to meet the Euro 7 emission standard. Nevertheless, the hydrocarbon (HC) condensation in the cooler leads to uncontrolled thermal-hydraulic performance, and the onset temperature of HC condensation is still debated, which is one of the obstacles to implementing the Euro 7 standard. Here, we first established a database of key parameters (carbon number, concentration, and pressure); then theoretically calculated the onset temperatures of various condensation types (wall condensation, heterogeneous nucleation, and homogeneous nucleation), plotted the entire map and verified its veracity; and finally, elucidated the contribution of each parameter through sensitivity analysis. The results show that (i) HC species are C12 to C25, from 25 to 1717 ppm concentrations, and pressures are from 1 to 4 bar. (ii) The map diagrams for the onset temperature of HC condensation have broad applicability and strong practicality. (iii) The temperature ranges of the onset of wall condensation, heterogeneous nucleation, and homogeneous nucleation are from 4 to 218 °C, from 1 to 209 °C, and from −6 to 195 °C, respectively. (iv) Carbon number has the most significant contribution, followed by HC concentration and pressure. The results can provide a valuable reference for more accurate EGR cooler design and management.

Hygroscopic Properties of Water-Soluble Counterpart of Ultrafine Particles from Agriculture Crop-Residue Burning in Patiala, Northwestern India

To determine the link between hygroscopicity and the constituent chemical composition of real biomass-burning atmospheric particles, we collected and analyzed aerosols during wheat-straw (April–May), rice-straw (October–November), and no-burning periods (August–September) in 2008 and 2009 in Patiala, Punjab. A hygroscopicity tandem differential mobility analyzer (HTDMA) system was used to measure hygroscopicity at ~5 to ~95% relative humidity (RH) of aerosolized 100 nm particles generated from the water extracts of PM0.4 burning and no-burning aerosol samples. The chemical analyses of the extracts show that organic carbon and water-soluble inorganic-ion concentrations are 2 to 3 times higher in crop-residue burning aerosol samples compared to no-burning aerosols, suggesting the substantial contribution of biomass burning to the carbonaceous aerosols at the sampling site. We observed that aerosolized 100 nm particles collected during the crop-residue burning period show higher and more variable hygroscopic growth factor (g(RH)) ranging from 1.21 to 1.68 at 85% RH, compared to no-burning samples (1.27 to 1.33). Interestingly, crop-residue burning particles also show considerable shrinkage in their size (i.e., g(RH) < 1) at lower RH (<50%) in the dehumidification mode. The increased level of major inorganic ions in biomass-burning period aerosols is a possible reason for higher g(RH) as well as the observed particle shrinkage. Overall, the measured g(RH), together with the correlation observed between aerosol water content and ionic-species volume fraction, and the study of the abundance of individual constituent ionic species suggests that inorganic salts and their proportion in aerosol particles primarily governed the aerosol hygroscopicity.

Influence of Hydrothermal Carbonization (HTC) Temperature on Hydrochar and Process Liquid for Poultry, Swine, and Dairy Manure

Hydrothermal carbonization (HTC) is a promising technology for wet manure treatment by converting animal manure into valuable fuels, materials, and chemicals. Among other HTC process parameters, the temperature influences HTC products the most. As various animal manures have different compositions, it is not certain how the HTC temperature influences the hydrochar and HTC process liquid. To evaluate the temperature’s effect on HTC, three different manures (poultry, swine, and dairy) were hydrothermally carbonized at three different temperatures (180, 220, and 260 °C), and solid and liquid products were characterized for their morphology, elemental compositions, and ions. The carbon contents of the hydrochar reached as high as 38.98 ± 0.36% and 40.05 ± 0.57% for poultry and swine manure, respectively, when these manures were treated at 260 °C. Ammonium showed an around 30% increase in poultry manure hydrochar with the increase in the HTC temperature. In contrast, in swine manure, it decreased by around 80%, and in dairy manure, the HTC temperature did not have any remarkable effect on the ammonium content. The process liquids from HTC of dairy manure at 220 °C showed the most balanced distribution of different ions, with 4970 ± 673 ppm of sodium, 4354 ± 437 ppm of ammonium, 2766 ± 417 ppm of potassium, 978 ± 82 ppm of magnesium, 953 ± 143 ppm of calcium, 3607 ± 16 ppm of chloride, and 39 ± 7 ppm of phosphate. These results emphasize the manure-specific effects of the HTC temperature on both solid and liquid products, indicating the need for optimized strategies to enhance HTC processes for various types of animal manures.

Effects of Biochar Pyrolysis Temperature and Application Rate on Saline Soil Quality and Maize Yield

The application of biochar to improve the quality of saline soils has attracted widespread attention. However, the impact of saline soil amendments with biochar prepared at different pyrolysis temperatures remains unclear. Therefore, we conducted a two-year (2022–2023) field experiment in the Hetao Irrigation District, China, to evaluate the effects of the biochar pyrolysis temperature (C1: 300 °C, C2: 500 °C, and C3: 700 °C) and application rate (T1: 10 t/ha and T2: 20 t/ha) on the soil quality and maize yield. The results indicated that (1) all biochar treatments significantly decreased the soil bulk density and increased the soil porosity; (2) treatment C3T1 significantly increased the soil moisture content and decreased soil salinity. The C3T2 treatment significantly increased the soil’s organic carbon content, and the soil’s available phosphorus content was greatest in the C1T2 treatment. (3) The maize yield increased linearly with the soil quality index (SQI), which was attributed mainly to improvements in the soil water–salt conditions and increases in the soil organic carbon content. In summary, biochar produced at high pyrolysis temperatures, when applied at a low application rate (C3T1), can result in high corn yields and improve saline soil quality.

Adsorption–desorption and leaching behavior of benzovindiflupyr in different soil types

Benzovindiflupyr is a succinate dehydrogenase inhibitor fungicide that targets mitochondrial function for disease control. In this study, we investigated the adsorption–desorption and leaching behavior of benzovindiflupyr in eight soil types using the batch equilibrium method and the soil column leaching method. A Freundlich model (r2 > 0.9959) was used to better characterize the adsorption-desorption process in eight soil types, with adsorption coefficients (KF-ads) ranging from 2.303 to 17.886. KF-ads was significantly and positively correlated (p < 0.05) with the organic carbon content. High temperatures and increased initial pH of aqueous solutions led to a decrease in benzovindiflupyr adsorption in the soil. The adsorption was also influenced by factors such as ionic strength, humic acid, surfactant type, microplastic type, and particle size and concentration. Moreover, benzovindiflupyr exhibited low leachability in all four soils selected, but different leaching solutions affected the risk of benzovindiflupyr migration to groundwater. Overall, this study provides insights into the adsorption characteristics of benzovindiflupyr in different soils and provides key information for environmental risk assessment.