Canopy Water Content Research Articles

Estimation of Canopy Water Content by Integrating Hyperspectral and Thermal Imagery in Winter Wheat Fields

Rapid and accurate estimation of canopy water content (CWC) is important for agricultural water management and food security. Due to the complexity of dynamic changes in water transport during plant growth, estimation of CWC using a single sensor often leads to high uncertainty in the results. Multi-sensor data fusion is one of the solutions to this problem, but suitable spectral preprocessing methods and data fusion methods still need further research. The objectives of this study were to characterize the performance of two varieties at different growth stages under five water stress conditions and screen hyperspectral sensitive spectral bands by using continuous wavelet transform (CWT) and a successive projection algorithm (SPA). Ultimately, the CWC prediction model of winter wheat hyperspectral characteristic bands and thermal imaging information fusion was created using the GRA algorithm. The results showed that canopy temperature parameters and spectral parameters responded significantly to water deficits in winter wheat. Using the CWT-SPA method, a total of 285 hyperspectral feature bands with wavelet decomposition scales ranging from one to eight were selected. The sensitive bands were mainly distributed in the following ranges: 545–561, 746–1348, 1561–1810, and 2122–2430 nm. The GRA algorithm has good multi-source data model fusion capability, and its constructed prediction model based on hyperspectral and thermal image fusion has high accuracy on the canopy water content in winter wheat (R2 = 0.930, RMSE = 5.44%, nRMSE = 7.94%). Compared to the single-feature spectral model (R2 = 0.864, RMSE = 5.92%, nRMSE = 8.63%) and thermal image CWC prediction model (R2 = 0.813, RMSE = 7.22%, nRMSE = 10.49%), the model prediction accuracy based on the GRA algorithm is increased by 7.64% and 13.69%, respectively.

The novel triangular spectral indices for characterizing winter wheat drought

Agricultural drought threatens food security and agricultural sustainable development. There have been numerous spectral indices from remote sensing images developed for monitoring crop drought. However, most present spectral indices are focusing on crop growth and Land Surface Temperature (LST), and the crop canopy water content are in less consideration simultaneously. Additionally, the Normalized Difference Vegetation Index (NDVI) is used for characterizing crop growth in almost all spectral drought indices, with the spectral saturation problem of NDVI for closed crop canopy. When vegetation cover is high, NDVI values tend to saturate, which makes them insensitive to further changes in crop health. Therefore, the NDVI saturation phenomenon may lead to an underestimation of the extent of crop drought, as it is not effective in identifying subtle changes in crops under high-density vegetation conditions. Hence, we propose three novel triangular spectral indices for characterizing winter wheat drought using three features including LAI, Land Surface Water Index (LSWI) and LST. For validating the proposed spectral indices, we compared the agreement between these indices with measured Relative Soil Moisture (RSM) and Volumetric Water Content (VWC) of soil in agricultural meteorological station and present popular indices including Crop Water Stress Index (CWSI), Temperature-Vegetation Drought Index (TVDI), and Vegetation Health Index (VHI). The results revealed that our proposed indices including Euclidean distance Crop Health Index (ECHI), Difference Crop Health Index (DCHI) and Perpendicular Water Stress Index (PWSI) outperformed the popular CWSI, TVDI and VHI, with stronger correlations with measured RSM and VWC in agricultural meteorological station. Secondly, there are spatial consistencies for characterizing winter wheat drought between proposed ECHI, DCHI and PWSI with popular CWSI, TVDI and VHI. In addition, our proposed ECHI, DCHI and PWSI have achieved good performance of drought monitoring both in irrigated and rainfed croplands. All these results suggest that our proposed indices have great potential in crop drought monitoring.

Imaging Spectroscopy‐Based Estimation of Aboveground Biomass in Louisiana's Coastal Wetlands: Toward Consistent Spectroscopic Retrievals Across Atmospheric States

AbstractDeveloping accurate landscape‐scale aboveground biomass (AGB) maps is critical to understanding coastal deltaic wetland resilience, as AGB influences stability and elevation dynamics in herbaceous wetlands. Here we used AVIRIS‐NG imaging spectrometer (or “hyperspectral”) data from NASA's 2021 Delta‐X mission in coastal Louisiana to map seasonal changes in herbaceous AGB across two deltaic basins with contrasting sediment delivery and hydrologic regimes: the Atchafalaya (active) and Terrebonne (inactive). We assessed the impact of atmospheric effects on our retrievals, as high water vapor content in August 2021 caused significant noise in the 880–1,000 and 1,080–1,200 nm near‐infrared (NIR) wavelengths. We hypothesized that correcting these wavelengths with our conditional Gaussian interpolation algorithm would improve AGB estimates due to their association with plant canopy water content. We empirically assessed the performance of the corrected spectra on AGB estimates using Partial Least Squares Regression (PLSR), finding that the corrected NIR bands attained high variable importance and reduced estimation errors. Our Random Forest regression approach based on the corrected spectra attained equivalent error metrics via leave‐one‐out‐cross‐validation as the PLSR models (R2 = 0.43, mean absolute error = 257.3 g/m2) while greatly improving the AGB maps' visual quality, having better captured variability while reducing noise and discontinuities in AGB estimates across flightlines. The maps show differing seasonal growth, with the Atchafalaya and Terrebonne Basins' AGB increasing from means of 4.3–9.4 and 4.6–8.9 Mg/ha, respectively. We demonstrated that imaging spectroscopy can be applied to assess herbaceous biomass stocks, growth patterns, and resilience in coastal ecosystems.

A novel soybean mapping index within the global optimal time window

Efficient soybean mapping is critical for agricultural production and yield prediction. However, current sample-driven soybean mapping methods heavily rely on large representative sample datasets, limiting the interpretability of physical mechanisms. Besides, sample-free methods failed to exploit key features that differentiate soybean from other crops, especially Chlorophyll content. Misclassification errors persist and spatiotemporal generalization remains limited. Therefore, this study develops a novel Soybean Mapping Composite Index (SMCI) within a precise Global Optimal Time Window (GOTW). It integrates unique features of soybean Chlorophyll content, canopy water content, and canopy greenness by coupling three red-edge bands (RE2, RE3, and RE4), one near-infrared band, one shortwave infrared band, and two feature indices (Enhanced Vegetation Index and Green Chlorophyll Vegetation Index). The novel index was applied to soybean mapping at six sites in four major soybean producing countries (China, Argentina, Brazil, and the United States) from 2019 to 2021, using an optimal threshold of 3.25. Within the GOTW, the index responds better to spectral features and improves soybean separability. The average overall accuracy (OA: 91%) and average Kappa coefficient (Kappa: 0.83) for the novel index at all sites outperformed the traditional sample-driven Random Forest (RF) method (OA: 84%, Kappa: 0.70) and the existing sample-free index-based Greenness and Water Content Composite Index (GWCCI) (OA: 81%, Kappa: 0.64). Furthermore, interannual transfer experiments consistently showed high accuracy, demonstrating robust spatiotemporal transferability. The proposed SMCI index meets the need for a lightweight and stable soybean mapping tool and serves as a valuable reference for efficient global crop mapping.

No Field Evidence of Grass Fuel Structure effects on Postfire Tree Mortality in Juniperus virginiana

Prescribed fires are an important management tool for containing woody plant encroachment in rangeland ecosystems. Grasses are the dominant fuel type in rangelands. Past work has shown that grass canopy architecture, which varies among grass species, can influence flammability. Whether variation in grass fuel structure can influence postfire plant responses has not yet been tested. To bridge this gap, we set up field burning experiments with different fuel treatments and examined postfire mortality of Juniperus virginiana L. in a tallgrass prairie in southwestern Missouri. We sampled 60 trees and measured tree height and diameter at breast height before the fire. Fuels surrounding each tree were manipulated to vary independently in both fuel load and fuel structure. Flame temperatures were measured during the fire, and both stem and canopy injuries were evaluated 1 d after the fire. We surveyed tree mortality 7 mo after the fire. We found no effects of either fuel load or fuel structure on postfire mortality or on canopy injury in J. virginiana. Canopy injury was a critical fire severity measurement determining postfire mortality in J. virginiana, and taller trees are more fire resilient. Despite laboratory-observed fuel structure effects on flammability, this study finds no evidence for the importance of grass fuel load and canopy architecture in influencing postfire tree response. This result might arise from the low crown depth and low canopy water content of J. virginiana, which can promote canopy fire and result in a high mortality rate across fuel treatments. Notwithstanding the negative results, testing laboratory-based findings in field settings is important for further examining laboratory observations and upscaling individual-level processes to ecosystems to help identify the key ecological processes determining population dynamics and community assembly. Our study also suggests that prescribed fire is an effective tool to remove encroaching J. virginiana in tallgrass prairies at an early stage.

Monitoring Biophysical Variables (FVC, LAI, LCab, and CWC) and Cropland Dynamics at Field Scale Using Sentinel-2 Time Series

Biophysical variables play a crucial role in understanding phenological stages and crop dynamics, optimizing ultimate agricultural practices, and achieving sustainable crop yields. This study examined the effectiveness of the Sentinel-2 Biophysical Processor (S2BP) in accurately estimating crop dynamics descriptors, including fractional vegetation cover (FVC), leaf area index (LAI), leaf chlorophyll a and b (LCab), and canopy water content (CWC). The evaluation was conducted using estimation quality indicators (EQIs) and comprehensive ground throughout the entire growing season at the field scale. To identify soil and vegetation pixels, the spectral unmixing technique was employed. According to the EQIs, the best retrievals were obtained for FVC in around 99.9% of the 23,976 pixels that were analyzed during the growth season. For LAI, LCab, and CWC, over 60% of the examined pixels had inputs that were out-of-range. Furthermore, in over 35% of the pixels, the output values for LCab and CWC were out-of-range. The FVC, LAI, and LCab estimates agreed well with ground measurements (R2 = 0.62–0.85), whereas a discrepancy was observed for CWC estimates when compared with ground measurements (R2 = 0.51). Furthermore, the uncertainties of FVC, LAI, LCab, and CWC estimates were 0.09, 0.81 m2/m2, 60.85 µg/cm2, and 0.02 g/cm2 through comparisons to ground FVC, LAI, Cab, and CWC measurements, respectively. Considering EQIs and uncertainty metrics, the order of the estimation accuracy of the four variables was FVC > LAI > LCab > CWC. Our analysis revealed that temporal variations of FVC, LAI, and LCab were primarily driven by field-scale events like sowing date, growing period, and harvesting time, highlighting their sensitivity to agricultural practices. The robustness of S2BP results could be enhanced by implementing a pixel identification algorithm, like embedding spectral unmixing. Overall, this study provides detailed, pixel-by-pixel insights into the performance of S2BP in estimating FVC, LAI, LCab, and CWC, which are crucial for monitoring crop dynamics in precision agriculture.

A New Remote Sensing Index for Forest Dryness Monitoring Using Multi-Spectral Satellite Imagery

Canopy water content is a fundamental indicator for assessing the level of plant water stress. The correlation between changes in water content and the spectral reflectance of plant leaves at near-infrared (NIR) and short-wave infrared (SWIR) wavelengths forms the foundation for developing a new remote sensing index, the Infrared Canopy Dryness Index (ICDI), to monitor forest dryness that can be used to predict the consequences of water stress. This study introduces the index, that uses spectral reflectance analysis at near-infrared wavelengths, encapsulated by the Normalized Difference Infrared Index (NDII), in conjunction with specific canopy conditions as depicted by the widely recognized Normalized Difference Vegetation Index (NDVI). Development of the ICDI commenced with the construction of an NDII/NDVI feature space, inspired by a conceptual trapezoid model. This feature space was then parameterized, and the spatial region indicative of water stress conditions, referred to as the dry edge, was identified based on the analysis of 10,000 random observations. The ICDI was produced from the combination of the vertical distance (i.e., under consistent NDVI conditions) from an examined observation to the dry edge. Comparisons between data from drought-affected and non-drought-affected control plots in the Australian Northern Jarrah Forest affirmed that the ICDI effectively depicted forest dryness. Moreover, the index was able to detect incipient water stress several months before damage from an extended drought and heatwave. Using freely available satellite data, the index has potential for broad application in monitoring the onset of forest dryness. This will require validation of the ICDI in diverse forest systems to quantify the efficacy of the index.

UAV-Based Remote Sensing to Evaluate Daily Water Demand Characteristics of Maize: A Case Study from Yuci Lifang Organic Dry Farming Experimental Base in Jinzhong City, China

Soil moisture critically influences crop growth, especially in dryland environments. Precise agricultural management requires real-time monitoring of stratified soil moisture and assessment of crops’ daily water needs. We aim to provide low-cost, high-throughput information acquisition services for dryland regions with underdeveloped infrastructure and offer scientific support for sustainable water resource management. We used UAVs (Unmanned Aerial Vehicles) with multi-spectral sensors for routine maize monitoring, capturing leaf reflectance. Constructing vegetation indices, we quantified the relationship between leaf water content and surface soil moisture, using the Biswas model to predict deep soil moisture distribution. We used UVAs to monitor crop height and calculated the daily water demand for the entire growth period of corn using the Penman Montes equation. We found an R2 of 0.8603, RMSE of 2.455%, and MAE of 2.099% between NDVI and canopy leaf water content. A strong linear correlation (R2 = 0.7510) between canopy leaf water content and soil moisture was observed in the top 20 cm of soil. Deep soil moisture inversion from the top 20 cm soil moisture showed an R2 of 0.9984, with RE mostly under 10%, but exceeding 20% at 120 cm depth. We also constructed a maize height model aligning with a sigmoidal growth curve (R2 = 0.9724). Maize’s daily water demand varied from 0.7121 to 9.4263 mm, exhibiting a downward-opening parabolic trend. Integration of rainfall and soil water data allowed for dynamic irrigation adjustments, mitigating drought and water stress effects on crops. We highlighted UAV multi-spectral imaging’s effectiveness in monitoring crop water needs, facilitating quick daily water requirement estimations. Our work offers a scientific foundation for managing maize cultivation in drylands, enhancing water resource utilization.

Gaussian Process Regression Hybrid Models for the Top-of-Atmosphere Retrieval of Vegetation Traits Applied to PRISMA and EnMAP Imagery

The continuous monitoring of the terrestrial Earth system by a growing number of optical satellite missions provides valuable insights into vegetation and cropland characteristics. Satellite missions typically provide different levels of data, such as level 1 top-of-atmosphere (TOA) radiance and level 2 bottom-of-atmosphere (BOA) reflectance products. Exploiting TOA radiance data directly offers the advantage of bypassing the complex atmospheric correction step, where errors can propagate and compromise the subsequent retrieval process. Therefore, the objective of our study was to develop models capable of retrieving vegetation traits directly from TOA radiance data from imaging spectroscopy satellite missions. To achieve this, we constructed hybrid models based on radiative transfer model (RTM) simulated data, thereby employing the vegetation SCOPE RTM coupled with the atmosphere LibRadtran RTM in conjunction with Gaussian process regression (GPR). The retrieval evaluation focused on vegetation canopy traits, including the leaf area index (LAI), canopy chlorophyll content (CCC), canopy water content (CWC), the fraction of absorbed photosynthetically active radiation (FAPAR), and the fraction of vegetation cover (FVC). Employing band settings from the upcoming Copernicus Hyperspectral Imaging Mission (CHIME), two types of hybrid GPR models were assessed: (1) one trained at level 1 (L1) using TOA radiance data and (2) one trained at level 2 (L2) using BOA reflectance data. Both the TOA- and BOA-based GPR models were validated against in situ data with corresponding hyperspectral data obtained from field campaigns. The TOA-based hybrid GPR models revealed a range of performance from moderate to optimal results, thus reaching R2 = 0.92 (LAI), R2 = 0.72 (CCC) and 0.68 (CWC), R2 = 0.94 (FAPAR), and R2 = 0.95 (FVC). To demonstrate the models’ applicability, the TOA- and BOA-based GPR models were subsequently applied to imagery from the scientific precursor missions PRISMA and EnMAP. The resulting trait maps showed sufficient consistency between the TOA- and BOA-based models, with relative errors between 4% and 16% (R2 between 0.68 and 0.97). Altogether, these findings illuminate the path for the development and enhancement of machine learning hybrid models for the estimation of vegetation traits directly tailored at the TOA level.

Modeling canopy water content in the assessment for rainfall induced surface and groundwater nitrate contamination: The Bilate cropland sub watershed

Nitrate contamination in surface and groundwater remains a widespread problem in agricultural watersheds is primarily associated to high levels of percolation or leakage from fertilized soil, which allows easy infiltration from soil into groundwater. This study was aimed to predict canopy water content to determine the nitrate contamination index resulting from nitrogen fertilizer loss in surface and groundwater. The study used Geographically Weighted Regression (GWR) model using MODIS 006 MOD13Q1-EVI Earth observation data, crop information and rainfall data. Satellite data collection was synchronized with regional crop calendars and calibrated to plant biomass. The average plant biomass during observed plant growth stages was between 0.19 kg/m2 at the minimum and 0.57 kg/m2 at the maximum. These values are based on the growth stages of crops and provide a solid basis for monitoring and validating crop water productivity data. The simulation results were validated with a high correlation coefficient (R2 = 0.996, P < 0.0005) for the observed rainfall in the growing zone compared to the predicted canopy water content. The nitrate contamination index assessment was conducted in 2004, 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2018 and 2020. Canopy water content and root zone seasonal water content were measured in (%) per portion as indicators of the NO−3-N-nitrate contamination index in these years (0.391, 0.316, 0.298, 0.389, 0.380, 0.339, 0.242, 0.342 and 0.356).

Mechanistic links between physiology and spectral reflectance enable previsual detection of oak wilt and drought stress

Tree mortality due to global change-including range expansion of invasive pests and pathogens-is a paramount threat to forest ecosystems. Oak forests are among the most prevalent and valuable ecosystems both ecologically and economically in the United States. There is increasing interest in monitoring oak decline and death due to both drought and the oak wilt pathogen (Bretziella fagacearum). We combined anatomical and ecophysiological measurements with spectroscopy at leaf, canopy, and airborne levels to enable differentiation of oak wilt and drought, and detection prior to visible symptom appearance. We performed an outdoor potted experiment with Quercus rubra saplings subjected to drought stress and/or artificially inoculated with the pathogen. Models developed from spectral reflectance accurately predicted ecophysiological indicators of oak wilt and drought decline in both potted and field experiments with naturally grown saplings. Both oak wilt and drought resulted in blocked water transport through xylem conduits. However, oak wilt impaired conduits in localized regions of the xylem due to formation of tyloses instead of emboli. The localized tylose formation resulted in more variable canopy photosynthesis and water content in diseased trees than drought-stressed ones. Reflectance signatures of plant photosynthesis, water content, and cellular damage detected oak wilt and drought 12 d before visual symptoms appeared. Our results show that leaf spectral reflectance models predict ecophysiological processes relevant to detection and differentiation of disease and drought. Coupling spectral models that detect physiological change with spatial information enhances capacity to differentiate plant stress types such as oak wilt and drought.

Anthropogenic disturbance exacerbates resilience loss in the Amazon rainforests.

Uncovering the mechanisms that lead to Amazon forest resilience variations is crucial to predict the impact of future climatic and anthropogenic disturbances. Here, we apply a previously used empirical resilience metrics, lag-1 month temporal autocorrelation (TAC), to vegetation optical depth data in C-band (a good proxy of the whole canopy water content) in order to explore how forest resilience variations are impacted by human disturbances and environmental drivers in the Brazilian Amazon. We found that human disturbances significantly increase the risk of critical transitions, and that the median TAC value is ~2.4 times higher in human-disturbed forests than that in intact forests, suggesting a much lower resilience in disturbed forests. Additionally, human-disturbed forests are less resilient to land surface heat stress and atmospheric water stress than intact forests. Among human-disturbed forests, forests with a more closed and thicker canopy structure, which is linked to a higher forest cover and a lower disturbance fraction, are comparably more resilient. These results further emphasize the urgent need to limit deforestation and degradation through policy intervention to maintain the resilience of the Amazon rainforests.

Towards practical semi-empirical models for the estimation of leaf and canopy water contents from hyperspectral reflectance

The knowledge of crop water status provides valuable information for agricultural water management. Most remote sensing methods for estimating water contents are based on statistical models and spectral features in the shortwave infrared region where water absorption dominates. However, the effects of leaf structure (Ns) and dry matter (expressed as leaf mass per area, LMA) on the spectral features in this region are not fully considered when estimating leaf water content (LWC) and canopy water content (CWC). This issue would lead to the data-specific empirical model, which lacks generality and is not transferable among different conditions. To fill this gap, this study for the first time evaluated the Ns and LMA effects on the spectral features, including the widely used normalized difference (ND)-type vegetation index (VI) and wavelet feature (WF) from wavelet transform. The leaf and canopy radiative transfer model simulations showed that the ND-type VI was sensitive to Ns at both leaf and canopy levels, whereas WF was sensitive to LMA at the canopy level. For example, the relationships between WF and CWC varied clearly with the level of LMA, especially for high values of CWC. Next, the optimal water index (OWI = ND1200,1500) and optimal WF (OWF = WF1600,8) were determined by minimizing their correlations with the Ns and LMA based on the leaf and canopy simulations. Unlike the existing spectral features applicable to only leaf or canopy level alone, OWI and OWF showed more consistent performance on estimating LWC and CWC. OWI- and OWF-based semi-empirical models were calibrated using model simulations and then evaluated using the independent measured datasets. The semi-empirical model based on OWI exhibited moderate estimation accuracy of LWC (R2 = 0.62, RMSE = 24.33 g/m2) and CWC (R2 = 0.69, RMSE = 0.15 kg/m2), outperforming previous ND-type VIs. In comparison, the best estimation accuracies for LWC (R2 = 0.80, RMSE = 17.47 g/m2) and CWC (R2 = 0.85, RMSE = 0.11 kg/m2) were obtained by the OWF-based semi-empirical model when the prior information of LMA was incorporated at the canopy level. These findings have great potential for mapping crop water status over large regions with universal semi-empirical models and hyperspectral satellite imagery.

Combining machine learning algorithm and multi-temporal temperature indices to estimate the water status of rice

Real-timely monitoring of the crop water status can improve irrigation scheduling to increase water saving and enhance agricultural sustainability, whereas the canopy temperature measured by thermal imaging is an essential indicator for determining the rice water status. The primary goal of this study was to propose a new temperature index based on the temporal variance of the daily temperature and to develop the rice water status estimation model. Two field experiments involving two rice varieties and multi-irrigation regimes were conducted from 2019 to 2020. A thermal imaging camera was used to measure the canopy temperature from 8:00–16:00 at 2-hour intervals across all growth stages. Three plant water parameters, namely plant water content (PWC), canopy water content (CWC), and canopy equivalent water thickness (CEWT), were collected simultaneously. The results showed that canopy temperature and plant water parameters differed obviously among different irrigation treatments. The relative canopy temperature velocity (RCTV) was developed based on the temporal variance of the daily temperature, and the RCTV8–12 performed well in distinguishing different irrigation treatments and quantifying the rice water status. The coefficient of determination (R2) values of the exponential relationships between the optimal RCTV and plant water parameters reached 0.47 (PWC), 0.39 (CWC) and 0.18 (CEWT). The random forest model, which integrates the multi-temperature indices, achieved a good estimation for PWC (R2 = 0.78), CWC (R2 = 0.77), and CEWT (R2 = 0.64) across all growth stages. In summary, combining the multi-temperature indices derived from the thermal infrared imagery and machine learning algorithm can facilitate the non-destructive estimation of the rice water status and improve the precision irrigation schedule.

Evaluating canopy water content in grasslands by using in situ hyperespectral data

The water content of vegetation is considered a key parameter for ecological analysis as well as for agricultural and forestry applications. Remote sensing methods offer significant advantages over traditional field methods for determining the water content of vegetation at the leaf, canopy, and landscape levels. In this study, the potential of hyperspectral vegetation indices in predicting canopy water content in grasslands was evaluated. For this purpose, data were collected from 3 several grasslands located at ~500 m, ~1200 m and ~1400 m altitudes. 71 samples were collected from each study area, and a total of 213 samples were analyzed. In this context, 59 ratio-based hyperspectral vegetation indices were tested. The relationship between canopy water content and hyperspectral vegetation indices was evaluated with linear, exponential, logarithmic and power regression models. The results showed that the NW-3 (920,970) index significantly represents the canopy water content variable. It was determined that the exponential regression model created with this index was able to explain the variations in canopy water content up to 85%. On the other hand, it has been detected that the high level of water content in the vegetation creates a significant saturation problem. Another finding of this study is that the predictive power reaches higher levels in low canopy water content characteristics. The results of this study show that in situ hyperspectral data has a very high potential in determining vegetation water content in grasslands.

Radial growth, wood anatomical traits and remote sensing indexes reflect different impacts of drought on Mediterranean forests

Drought reduces canopy cover, productivity and tree growth in forests. However, there is still little knowledge on how drought affects coupling between canopy greenness assessed by remote sensing and hydraulic conductivity detected by wood anatomy. This combination could improve the understanding of forest response to climate change. Thus, we investigated the impacts of a hot drought, which occurred in summer 2017, on radial growth, earlywood hydraulic diameter (Dh), a proxy of conductivity, and several remote-sensing indices in mixed Mediterranean hardwood forests (Quercus pubescens Willd. – Fraxinus ornus L.). In general, growth showed a higher coherence among trees and a higher responsiveness to climate. Growth decreased during the drought year, particularly for Q. pubescens, which showed high defoliation and dieback intensity. Both species showed a decline of Dh in 2018 after the drought and subsequent warm winter conditions. We found positive relationships between Dh and remote-sensing data for Q. pubescens in some of these vulnerable sites, where (i) growth was constrained by dry spring-summer conditions and (ii) Dh and growth covaried. These findings indicate a high variability among sites and tree species in their responses to drought considering earlywood anatomy, growth canopy cover and water content. However, some common patterns emerge such as links between potential hydraulic conductivity (Dh), tree cover and Dh-growth covariation in the most impacted sites. Further, F. ornus seem to perform better in terms of growth under drought conditions, showing less mortality and dieback than Q. pubescens. Future studies could explore how water transport and changes in canopy cover respond to dry and warm conditions and if that covariation indicates vulnerability to drought.

Machine Learning for Predicting Forest Fire Occurrence in Changsha: An Innovative Investigation into the Introduction of a Forest Fuel Factor

Affected by global warming and increased extreme weather, Hunan Province saw a phased and concentrated outbreak of forest fires in 2022, causing significant damage and impact. Predicting the occurrence of forest fires can enhance the ability to make early predictions and strengthen early warning and responses. Currently, fire prevention and extinguishing in China’s forests and grasslands face severe challenges due to the overlapping of natural and social factors. Existing forest fire occurrence prediction models mostly take into account vegetation, topographic, meteorological and human activity factors; however, the occurrence of forest fires is closely related to the forest fuel moisture content. In this study, the traditional driving factors of forest fire such as satellite hotspots, vegetation, meteorology, topography and human activities from 2004 to 2021 were introduced along with forest fuel factors (vegetation canopy water content and evapotranspiration from the top of the vegetation canopy), and a database of factors for predicting forest fire occurrence was constructed. And a forest fire occurrence prediction model was built using machine learning methods such as the Random Forest model (RF), the Gradient Boosting Decision Tree model (GBDT) and the Adaptive Augmentation Model (AdaBoost). The accuracy of the models was verified using Area Under Curve (AUC) and four other metrics. The RF model with an AUC value of 0.981 was more accurate than all other models in predicting the probability of forest fire occurrence, followed by the GBDT (AUC = 0.978) and AdaBoost (AUC = 0.891) models. The RF model, which has the best accuracy, was selected to predict the monthly forest fire probability in Changsha in 2022 and combined with the Inverse Distance Weight Interpolation method to plot the monthly forest fire probability in Changsha. We found that the monthly spatial and temporal distribution of forest fire probability in Changsha varied significantly, with March, April, May, September, October, November and December being the months with higher forest fire probability. The highest probability of forest fires occurred in the central and northern regions. In this study, the core drivers affecting the occurrence of forest fires in Changsha City were found to be vegetation canopy evapotranspiration and vegetation canopy water content. The RF model was identified as a more suitable forest fire occurrence probability prediction model for Changsha City. Meanwhile, this study found that vegetation characteristics and combustible factors have more influence on forest fire occurrence in Changsha City than meteorological factors, and surface temperature has less influence on forest fire occurrence in Changsha City.

Estimation of canopy water content for wheat through combining radiative transfer model and machine learning

Canopy water content (CWC) is an important indicator of crop growth. Currently, the hybrid approach, which combines the physical model and machine learning (ML) method, is commonly used for inversing CWC at the regional scale via optical imagery. Although this approach has good inversion accuracy, it suffers from ill-posed issues from the physical model due to the difference between actual and simulated scenes. Meanwhile, the ability of existing ML methods to resolve this difference remains unclear. To fill the above study gaps, we added different degrees of Gaussian noise into the simulated dataset to reduce the differences in spectral reflectance between that simulated by the PROSAIL-5B model and that measured from optimal imagery. Furthermore, this study also compared the performance of different ML approaches (neural network, NN; Gauss process regression, GPR; and kernel ridge regression, KRR) in the retrieval of wheat (Triticum aestivum L.) CWC based on PROSAIL-simulated datasets. Additionally, we also compared the inversion results for the CWC generated by the SNAP Toolbox with those estimated by the hybrid approach. The results showed that the aforementioned hybrid approaches performed well in the retrieval of wheat CWC when Gaussian noise with a mean of zero and a standard deviation of 0.06 (η: 0, 0.06) was added to the simulated dataset. The hybrid model based on GPR had the highest accuracy of estimation for the CWC (RMSE = 0.0096 g/cm2, RRMSE = 22.2%), when compared with NN or KRR (NN: RMSE = 0.0105 g/cm2, RRMSE = 26.9%; KRR: RMSE = 0.0099 g/cm2, RRMSE = 24.3%). It also outperformed the existing CWC-retrieval algorithms among the SNAP Toolbox (RMSE = 0.027 g/cm2, RRMSE=44.1%). Our results demonstrate that the hybrid approach in combination with GPR and the physical model can accurately retrieve the CWC of crops, thus confirming that the approach is suitable for estimating the CWC.

Forest Canopy Water Content Monitoring Using Radiative Transfer Models and Machine Learning

Forests are facing various threats, such as drought, in the context of global climate change. Canopy water content (CWC) is a crucial indicator of forest water stress, mortality, and fire monitoring. However, previous studies on CWC have not adequately simulated forests with heterogeneous and discontinuous canopy structures. At the same time, there is a lack of field validation. This study retrieved the forest CWC across the contiguous U.S. (CONUS) with coupled radiative transfer models (RTMs) and the random forest (RF) algorithm. A Gaussian copula and prior knowledge were used for model parameterization. The results indicated that more accurate simulations of leaf trait dependencies and canopy structure characteristics lead to better CWC inversion. In addition, GeoSail, coupled with PROSPECT-5B, showed good performance (R2 = 0.68, RMSE = 0.15 kg m−2, MAE = 0.12 kg m−2, rRMSE = 12.78%, Bias = −0.036 kg m−2) for forest CWC retrieval. Large variation existed in forest CWC, spatiotemporally, and evergreen needle forest (ENF) showed strong CWC capacity. This study underscores the suitability of 3D RTMs for inversing the parameters of forest canopies.

Remote sensing of daily evapotranspiration and gross primary productivity of four forest ecosystems in East Asia using satellite multi-channel passive microwave measurements

Satellite multi-channel passive microwave observations provide valuable information of canopy vertical structure and vegetation water content, while their potential in the simultaneous estimation of forest evapotranspiration (ET) and gross primary productivity (GPP) has not been explored. This study combined satellite multi-channel microwave Emissivity Difference Vegetation Indices (EDVIs) from 6.9 to 36.5 GHz with the Penman-Monteith (PM), Priestley-Taylor (PT) and light use efficiency (LUE) models to estimate daily ET and GPP over four forest ecosystems in East Asia. In-situ measurements of daily ET, GPP and meteorological variables from ChinaFLUX network (2003 to 2010) were used to calculate and validate the method. An exponential relationship was found between EDVIs and canopy conductance across the forests. By inverting EDVIs-based LUE model coupled with PM and PT models when canopy carbon uptake and water content reached a maximum in growing seasons, the maximum LUE (EDVI-LUEmax) was derived and found to agree with other independent studies. Site validations showed that the EDVI-based method performed a good simultaneous estimation of daily ET and GPP at a tropical forest and three sub-tropical and temperate forests (R2 of 0.64 to 0.94 and RMSE of −11.7% to 19.6% for ET, R2 of 0.39 to 0.73 and RMSE of 31.2% to 50.4% for GPP). The modeled relationship between GPP and ET also agreed that from in-situ measurements. The results were also found to correlate with microwave frequencies. In-situ ET and GPP showed a stronger correlation with EDVI at 18.7 and 36.5 GHz than that at 10.7 and 18.7 GHz across the forests. EDVI-LUEmax of a temperate mixed forest increased as EDVI incorporated lower frequency microwave emissions from deeper canopy layers, which reduced the negative bias in GPP estimation. Overall, this study demonstrated the potential of multi-channel microwave measurements in estimating ET and GPP with the potential effects of vegetation vertical structure.