Ca Treatment Research Articles

Mechanisms of calcium-induced protection against lead toxicity in Ulmus umbraculifera L.: a physiological and biochemical perspective.

Lead (Pb) is a toxic stressor in the soil, which affects plant morphological and physiological events differently. A pot study was initiated to characterize the effect of calcium (Ca) application (20 and 40 mM) on Ulmus umbraculifera L. under Pb treatment (200 and 400 µM). The results revealed that higher levels of Pb significantly reduced plant height (48.3%), total dry weight (44.7%), leaf area index (45%), chlorophyll a (53.7%), chlorophyll b (51.4%), carotenoids (37.8%), and Fv/Fm ratio (20.4%) compared to untreated plants. However, the Ca application improved the aforementioned physiological features. Additionally, Pb toxicity disrupted oxidative status in the plants by increasing malondialdehyde (MDA), methylglyoxal, superoxide anion, and H₂O₂, which also induced the activities of SOD, GR, APX, and CAT. In contrast, Ca decreased MDA, methylglyoxal, superoxide anion, and H₂O₂ by enhancing SOD, CAT, GR, and APX activities compared to the control. Notably, ascorbate (AsA), dehydroascorbic acid (DHA), glutathione (GSH), oxidized glutathione (GSSG) levels, and AsA-DHA and GSH-GSSG ratios changed significantly with Pb and Pb + Ca treatments. According to our findings, monodehydroascorbate reductase (MDHAR), dehydroascorbate reductase (DHAR), glyoxalase (Gly) I, and Gly II activities increased with Pb treatment; however, Ca application further promoted their activities. Furthermore, Pb treatment significantly suppressed the uptake of mineral nutrients and increased Pb accumulation, whereas Ca application improved the uptake of these elements and lowered Pb content. These observations confirmed that the positive effects of Ca application on photosynthetic efficiency, nutrient absorption, and enzymatic and non-enzymatic antioxidants enhanced plant tolerance under Pb toxicity.

Validated kinetic modelling of ladle furnace process for predicting inclusions in API steel grade

A kinetic model of ladle furnace (LF) process is developed in C++ format using the FactSage database and ChemApp subroutines. The model considers all the process parameters such as ferroalloy and slag dissolution, wire additions, electrical arcing, steel/slag reactions, reoxidation due to slag eye opening, heat exchange between metal/slag, and refractory dissolution. Further, a correlation for inclusion removal rate was developed as a function of argon flow rate, using discrete phase method (DPM) in Computational Fluid dynamics (CFD). Lollypop samples from steel bath and slag samples were collected from the plant for API steel grade for chemical analysis and inclusion characterisation. At LF_in, the inclusions found were mostly alumina spinel with very low amount of Mg (∼3%), followed by spinel at intermediate stage having ∼15 wt. % of Mg and after Ca treatment, inclusions transformed into CaS and Calcium Aluminate type of inclusions. Overall inclusion weight fraction varied from 136 ppm at LF_in to 93 ppm at LF_out. The model calculations were found to give very good prediction for steel and slag chemistry, and inclusion global composition as compared to the plant results. Predicted temperature was found with an accuracy of ± 5 oC, while the calculated inclusion weight fraction was having an accuracy of ±12 ppm.

Numerical Evaluation for Influence of Ca Treatment and Slag Composition on Compositional Changes in Non-metallic Inclusion Using Coupled Reaction Model for Ladle Treatment

Numerical Evaluation for Influence of Ca Treatment and Slag Composition on Compositional Changes in Non-metallic Inclusion Using Coupled Reaction Model for Ladle Treatment

Combined Application of Biochar and Calcium Superphosphate Can Effectively Immobilize Cadmium and Reduce Its Uptake by Cabbage

Biochar and phosphate fertilizer are commonly employed for the mitigation of soil cadmium (Cd) contamination. Nevertheless, there is a dearth of research regarding the mechanism behind their joint implementation. In this study, a combination of corn straw biochar (0 (C0), 5 (C5), and 10 (C10) g kg−1) and calcium superphosphate (0 (P0), 0.1 (P1), 0.2 (P2), 0.5 (P5), and 1.0 (P10) g kg−1) was applied in pot experiments, and the effects of the combined application on Cd bioavailability and its uptake by cabbage were investigated in Cd-contaminated soils. The results demonstrated that the combined treatment of applying biochar and Ca(H2PO2)2 yielded a significant decrease in the uptake of Cd by cabbage in alkaline soil, in contrast to the individual treatments of biochar or Ca(H2PO2)2. Compared to the CK treatment (C0P0), the Cd content in the shoots decreased by 46.26% and in the roots decreased by 24.81%, while the biomass of the cabbage demonstrated a noteworthy increase in C5P10 treatment. Compared to the CK treatment, the content of available phosphate (AP) in the soil increased by 17.57 mg kg−1, residual Cd increased by 22.02%, the exchangeable Cd decreased by 45.86%, and carbonate-bound Cd decreased by 20.55% in the C5P10 treatment. Therefore, it is advisable to use a combination of 5 g kg−1 biochar and 1 g kg−1 Ca(H2PO2)2 for the restoration of soil contaminated with Cd.

The operating performance of Modified Basalt Fibers (MBF) bio-nest reactor exposed to nano-plastics

Biological nests made of Modified Basalt Fiber (MBF bio-nests) serve as effective carriers for enhancing wastewater treatment. However, little is known about their performance when exposed to nano-plastics. This study investigates the decontamination efficiency and microbial functionality of four types of MBF and traditional Basalt Fibers (BF) as carriers in contact oxidation reactors. Compared to BF, MBF demonstrated superior growth effects and biocompatibility within the bio-nest. Ca-MBF and Mn-MBF bio-nests exhibited the highest and most uniform absorption capacities, respectively, alongside increased secretion of total Extracellular Polymeric Substances (EPS) and higher Protein to Sugar (PN/PS) ratios. In sewage environments, all MBF groups displayed stable performance in removing NH4+-N and COD. Significant removal of TN and TP was notably observed in Mn-MBF treatments. Mn and Ca treatments predominantly influenced the Proteobacteria and Bacteroidetes phyla, crucial for nitrogen and phosphorus removal. Following exposure to nano-plastics, Mn-MBF and Ca-MBF treatments maintained high decontamination efficiency, particularly for TP and COD (48.64 % to 57.78 % and 90.91 % to 92.89 %, respectively). The significant removal of NH4+-N and TP only occurred in Mn-MBF and Ca-MBF treatments, which stimulated the growth of bacteria resistant to nano-plastics. Key genera such as Zoogloea and Meganema were identified as dominant, contributing to organic matter decomposition, EPS secretion, biofilm condensation, and enhanced microbial attachment. The findings underscore the structural stability enhancement of Mn-MBF and Ca-MBF bio-nests in contact oxidation reactors, demonstrating their resilience against nano-plastic pollution.

Chicoric acid acts as an ALOX15 inhibitor to prevent ferroptosis in asthma

BackgroundChicoric acid (CA) is a crucial immunologically active compound found in chicory and echinacea, possessing a range of biological activities. Ferroptosis, a type of iron-dependent cell death induced by lipid peroxidation, plays a key role in the development and advancement of asthma. Targeting ferroptosis could be a potential therapeutic strategy for treating asthma. PurposeThe purpose of this study was to explore the screening of ALOX15, a pivotal target of ferroptosis in asthma, and potential therapeutic agents, as well as to investigate the promising potential of CA as an ALOX15 inhibitor for modulating ferroptosis in asthma. MethodsThrough high-throughput data processing of bronchial epithelial RNA from asthma patients using bioinformatics and machine learning, the key target of ferroptosis in asthma, ALOX15, was identified. An inhibitor of ALOX15 was then obtained through high-throughput molecular docking and molecular dynamics simulation tests. In vitro experiments were conducted using a 16HBE cell model induced by house dust mite (HDM) and lipopolysaccharide (LPS), which were treated with the ALOX15 inhibitor (PD146176), CA treatment, or ALOX15 knockdown. In vivo experiments were also carried out using a mouse model induced by HDM and LPS. ResultsThe composite model of ALOX15 and CA in molecular dynamics simulations shows good stability and flexibility. Network pharmacological analysis reveals that CA regulates ferroptosis through ALOX15 in treating asthma. In vitro studies show that ALOX15 is highly expressed in HDM and LPS treatments, while CA inhibits HDM and LPS-induced ferroptosis in 16HBE cells by reducing ALOX15 expression. Knockdown of ALOX15 has the opposite effect. Metabolomics analysis identifies key compounds associated with ferroptosis, including L-Targinine, eicosapentaenoic acid, 16-hydroxy hexadecanoic acid, and succinic acid. In vivo experiments demonstrate that CA suppresses ALOX15 expression, inhibits ferroptosis, and improves asthma symptoms in mice. ConclusionOur research initially identified CA as a promising asthma treatment that effectively blocks ferroptosis by specifically targeting ALOX15. This study not only highlights CA as a potential therapeutic agent for asthma but also introduces novel targets and treatment options for this condition, along with innovative approaches for utilizing natural compounds to target diseases associated with ferroptosis.

Practical Implications of Using an Online Data-Driven Optimizer for Calcium-Treated Steels

Calcium (Ca) additions during secondary steelmaking are a well-adopted practice to transform solid oxide non-metallic inclusions (NMIs) into globular-shaped liquid oxides. The claimed hypothesis that liquid NMIs reduce SEN clogging has been proven in the past by researchers. However, the exact quantity of Ca needed to transform the physical state of NMIs during steelmaking remains uncertain. Operators in the steel plant use a consistent quantity of Ca additions for specific steel grades, but this approach does not account for the varying physical states and evolving dynamics of NMIs characteristics in each ‘heat’. To overcome this, a study was conducted to explore the impact of varying Ca additions on the transformation and behavior of NMIs in low-alloyed Ca-treated steel grades. The aim was to establish a more reliable and responsive approach to Ca treatment, potentially leading to more effective control in preventing submerged entry nozzle (SEN) clogging. The proposed methodology involved online monitoring of NMIs state coupled with controlled variations in Ca addition, deviating from fixed quantity, to observe its effects on NMIs state transformations. Through careful analysis of collected data and the implementation of a data-driven optimizer, this study reports the practical implications of using optimal amounts of Ca during secondary steelmaking. The resulting change due to dynamic calcium silicide (CaSi)-cored wire additions and their impact on SEN clogging were evaluated. The findings reveal the significant role of optimal CaSi wire additions, leading to improved steel castability and a notable 30 pct reduction in SEN clogging tendencies. The results obtained after the implementation of the data-driven optimizer ‘ClogCalc’ have significant implications for steel manufacturers, offering new insights into enhancing Ca treatment efficiency.

Insights into the antagonistic effects of calcium on cadmium accumulation in peanuts (Arachis hypogaea L.)

Peanut (Arachis hypogaea L.) plant has a high requirement for calcium (Ca) during its growth and development, and possesses the ability to accumulate cadmium (Cd) from soil. However, the precise mechanisms underlying the antagonistic effects between Ca and Cd remain unclear. This study aimed to explore the dynamic changes in Cd accumulation in peanut seedlings by varying the Ca-to-Cd concentration ratio (CRCa/Cd) from 250 to 3500. Additionally, the influence of ion channel competition and cell wall fixation in the root on Cd accumulation in peanuts was explored by analyzing Cd chemical forms, subcellular distribution, pectin content, and Cd2+ fluxes using a non-invasive micro-test technique (NMT). The findings revealed that Cd accumulation in peanut seedlings was significantly lower when the CRCa/Cd was higher than 2000. In the Ca-pretreated seedlings (cell wall fixation treatment), Cd content in the shoots and roots decreased by 18.9% and 25.0%, respectively, compared with the simultaneous exposure to Ca and Cd (ion channel competition treatment). Cd2+ influx in peanut roots decreased by 55.8% in the Ca-pretreated group. However, increasing the competitive strength of Ca2+ and Cd2+ did not affect Cd2+ influx under normal Ca conditions (>2 mM Ca). Meanwhile, Ca pretreatment significantly increased Cd distribution in the root cell wall, pectate, and protein-binding forms, while significantly reducing Cd distribution in root soluble components and inorganic Cd forms. The pectin content in the roots increased by 128% and 226% in the Ca and Cd simultaneous exposure treatment and Ca pretreatment, respectively. These results suggest that Ca pretreatment enhanced Cd retention in the root cell wall. Overall, exogenous Ca effectively mitigated Cd accumulation in peanut plants when the CRCa/Cd was below 2000, and Ca2+ channels partially facilitate the entry of Cd2+ into peanut roots. Under normal Ca supply conditions, exogenous Ca reduced Cd accumulation in peanuts primarily through root cell wall fixation rather than ion channel competition. Our findings provide insights into the mechanism by which Ca alleviates the uptake and transfer of Cd in peanuts.

Mitigating citrus fruit cracking: the efficacy of chelated calcium or silicon foliar fertilizers in 'Okitsu no. 58' citrus fruit.

The 'Okitsu No. 58' citrus variety is highly prone to fruit cracking, which jeopardizes yield and results in economic losses. In this study, we investigated the impacts of spraying 5 distinct concentrations (0.1, 0.2, 0.3, 0.4, and 0.5 g/L) of chelated calcium (Ca) or silicon (Si) fertilizers at the young fruit stage (60-90 days after flowering, DAF) on fruit cracking and quality in the citrus variety 'Okitsu No. 58'. The results showed either Ca or Si fertilizer treatments reduced fruit cracking. We found that all Ca and partial Si treatments (0.4 and 0.5 g/L) significantly promoted the accumulation of Ca content in the peel. Notably, Ca or Si treatments significantly reduced polygalacturonase (PG) activity and inhibited the production of water-soluble pectin (WSP) in the peel. Additionally, Ca or Si treatments elevated the superoxide dismutase (SOD) activity and decreased the malondialdehyde (MDA) content of the peels. Changes in these parameters likely contributed to strengthening the durability of peel cell wall constituents, thus enhancing the fruit's resistance to fruit cracking. Overall, except for the C3 (0.3 g/L of Ca), Ca or Si fertilizers contributed to fruit conventional quality, mainly in terms of higher soluble sugars (SS) and SS/TA (titratable acid). Therefore, our findings will provide a reference for the prevention and control of citrus fruit cracking and the development of new fertilizers.

The efficiency of Ca and K nitrate on the control of SERB damage in 'Thomson’ orange by modification of peel physical and chemical characteristics

One of the most severe peel physiological disorders of orange fruits is Stem End Rind Breakdown (SERB), a severe postharvest physiological disorder. We expected foliar Ca and K application to reduce orange SERB by modifying several peel biochemical and physical characteristics. Therefore, one experiment (2018–2020) was designed in complete randomized blocks in four treatments with three replicates. Experimental treatments included foliar spray of (1) K nitrate; (2) Ca nitrate; (3) Ca, and K nitrate separately, with a time interval (Ca + K; combination of treatments 1 and 2); (4) control. The effects of treatments were evaluated on several parameters underlying fruit peel quality at harvest and intensity of SERB damage after 12 wk of fruit storage at 5 ◦C and 85% RH. The results showed that K-treated fruits had higher TSS and TSS/TA than other fruits. Also, the Ca treatments (including Ca and Ca + K treatments) increased Ca content in fruit peels and significantly decreased SERB damage and weight loss by 70% and 30%, respectively. In addition, Thomson orange peel obtained from Ca-treated trees (including Ca and Ca + K treatments) displayed elevated levels of pectin than other fruits. In contrast, the peels of fruits picked from trees sprayed with Ca, especially those treated with Ca + K, exhibited lower levels of total phenolic, antioxidant, and electrolyte leakage than other fruits. This study suggests that foliar application of Ca(NO3)2 and KNO3 during the fruit growth cycle while improving the internal quality of the fruit is an effective agronomical strategy that prolongs Thomson orange shelf life.

Effect of calcium treatment on inclusions in 38CrMoAl high aluminum steel

Abstract Three parts of the experiment were mainly carried out in this research: the effect of Ca on inclusions in 38CrMoAl high aluminum steel under atmospheric pressure, the effect of pressure on the solubility of Ca in pure iron under pressurized conditions, and the effect of Ca on inclusions in 38CrMoAl high aluminum steel under pressurized conditions. The results indicated that Ca can significantly transform the inclusions such as Al2O3 and MgO·Al2O3 with high melting points into calcium aluminate inclusions with low melting points. It was found that the pressure condition can significantly improve the solubility of Ca in pure iron and molten steel, which provided reliable data reference and guidance for popularizing Ca treatment of steel under pressure conditions in the future. Finally, the mechanism of inclusion transformation after Ca treatment was put forward. In this study, the theoretical calculation of thermodynamics was closely compared with the experimental data. It was proposed that to modify the inclusions in high aluminum steel into calcium aluminate inclusions with low melting points, it is necessary to accurately control Ca in the target region.

The Quality of Grapes of the Moldova Variety According to the Foliar Fertilization System in the Phenophase of the Berry Growth

The fertilization of the vineyards is an important and sometimes decisive technological process in the production technology of table grapes. Knowing the nutritional needs of the grapevine in different phenophases ensures obtaining homogeneous, quantitative and qualitative harvests, but also increases the plants' resistance to adverse environmental conditions. The aim consists in the analysis of the quality indices of the Moldova table grape variety, following the application of Ca treatments, in the phenophase of berry growth. In the research, different variants of application of treatments with Ca (Calcinite) were studied, with 1-4 treatments, in different periods. Observations, measurements and determinations were carried out in the field, as well as chemical laboratory analyzes according to the methods approved in viticulture. The growth of the berries on the vine begins a few days after flowering and lasts until the grapes enter the field. Following the study, a positive influence of calcium treatments on grain firmness was observed in the variants with the highest number of foliar applications. The use of individual or combined calcium fertilization of the Moldova variety in the production conditions with 1-4 post-fertilization treatments, depending on the conditions of the year, positively influenced the quality of the harvest.

Effects of Mg–Ca treatment and Ca treatment on impact toughness and morphology of sulfides in 45MnVS non-quenched and tempered steel

Effects of Mg–Ca treatment and Ca treatment on impact toughness and morphology of sulfides in 45MnVS non-quenched and tempered steel

Effects of deoxidation methods on the inclusion characteristics and corrosion behaviour of high-strength low-alloy steels in marine environments

The effects of deoxidation methods on the inclusion characteristics and corrosion behaviour of high-strength low-alloy steels were examined in marine environments using various microcharacterisation techniques and first-principles calculations. After Ca treatment, MnS–MgO–Al2O3 inclusions were modified to CaS–MgO–Al2O3 and microcrevices were existed at the interface between inclusions and Fe. After Zr–Ti-RE deoxidation, spherical CaS + TiN + ZrO2+MgAl2O4+(Ca, La) Al3O7 inclusions appeared. (Ca, La)Al3O7 in steel displayed similar mechanical properties to Fe, reducing the degree of lattice distortion and the formation of microcrevices around the inclusions. Micro-galvanic corrosion between Fe and MnS accelerated the localised corrosion rate and promoted the formation of large pits on the surface. However, the chemical activity of CaS resulted in dissolution of the inclusion, which relatively inhibited the localised corrosion propagation. The enrichment of Cr in the rust layer after Zr–Ti-RE deoxidation improved the compactness, contributed to a reduction in the localised corrosion rate and long-term corrosion rate. Finally, the underlying mechanism influencing corrosion behaviour was established.

An effective strategy for manufacturing ultra-high purity AISI 316L stainless steel by vacuum C deoxidization pretreatment plus Mg–Ca composite treatment

Aiming at the special ultra-high purity (UHP) requirements of AISI 316L stainless steel used in semiconductor equipment, a strategy of vacuum C deoxidization pretreatment plus Mg–Ca composite treatment was proposed in this work. The effects of this strategy on cleanness and inclusion modification were systematically investigated by experimental observations and thermodynamic calculations. The results demonstrated that this strategy significantly reduced the O and S contents to 0.0005 wt% and 0.0007 wt%, respectively. The main inclusions after vacuum C deoxidization were large-sized Al2O3·SiO2 and MnS. After Mg treatment, the oxide inclusions were gradually modified into MgO·Al2O3 and MgO, while the sulfide inclusion was still MnS. After additional Ca treatment, the inclusions were further modified into finer CaO, MgO, CaO·MgO, and CaS. Moreover, this strategy remarkably decreased the number and size of the inclusions. The best level was that all inclusions were smaller than 2 μm, and the proportion of inclusions smaller than 1 μm was as high as 75.47%. Meanwhile, the evolution mechanism of inclusions during different treatments was clarified in this work. Finally, the optimum process for preparing UHP AISI 316L stainless steel was proposed as vacuum C deoxidation plus 0.002 wt% Mg and 0.0016 wt% Ca composite treatment.

Soil pH and phosphorus availability regulate sulphur cycling in an 82-year-old fertilised grassland

The application of lime and mineral fertiliser is known to mitigate soil acidification and improve soil quality in improved grasslands. However, the long-term effect of simultaneous lime and fertiliser amendments on soil carbon (C) and sulphur (S) cycling is still poorly understood. To examine if soil pH or nutrient availability are the dominant factors regulating C and S cycling, we evaluated the biodegradation of methionine (organic S), gross S transformation, and microbial S utilisation using 35S and 14C dual-labelling. Soil samples (0–10 cm) were collected from one unfertilised control and five annual limed (Ca) treatments with or without nitrogen (N), phosphorus (P), potassium (K) and sulphur (S) fertilisers (Ca, CaN, CaNP, CaNPKCl, CaNPK2SO4) in an 82-year-old upland grassland experiment in Rengen, Germany. Long-term lime application increased soil pH values but significantly (p < 0.05) decreased soil organic C content. Fertilisation had no significant effect on microbial utilisation of 35S-labelled methionine, while microbial immobilisation of 35SO42− in the limed soils was significantly reduced compared to the control. This is attributed to either the increased soil pH or decreased C availability after liming. Microbial carbon use efficiency (CUE) was significantly higher in soils with applied P fertiliser (i.e., CaNP: 0.66 ± 0.02, CaNPKCl: 0.68 ± 0.02, CaNPK2SO4: 0.65 ± 0.01) compared to the CaN treatment (0.58 ± 0.01). Moreover, compared to CaN, CaNP and CaNPKCl treatments significantly increased gross S turnover, while no significant effects were observed in the CaNPK2SO4 treatment. Soil P deficits decreased microbial CUE and S bioavailability. Although P fertiliser addition alleviated microbial P limitation when N fertiliser was added, S fertiliser (CaNPK2SO4) present constrained S transformation rates. Overall, the importance of P availability for global S cycling in grasslands is shown, especially under N-enrichment conditions. However, the subsequent potential for C loss from long-term liming should be carefully considered in grassland management.

Enhancing Quality Fruit Composition in Red Currant Cultivars by Foliar Calcium Application across Preharvest and Postharvest Stages

Foliar calcium (Ca) treatment exhibits strong potential for enhancing yield and quality in some fruit crops. This study aimed to assess the impact of foliar application of Ca-organomineral (Ca-OM) suspension on total soluble solids (TSS) and Ca dynamics in leaves and berries across five red currant cultivars during the vegetation and storage. A randomized block design with two treatments: (1) Control (without Ca-OM treatment) and (2) foliar Ca-OM treatment, with three repetitions, was applied on five different red currant cultivars. Although foliar Ca-OM treatments did not impact Ca or TSS in leaves, they positively influenced Ca and TSS in fruits, displaying significant variability among cultivars. In addition, Ca-OM treatment increased berry density, reduced abscission, and inhibited the development of diseases, extending storage periods for “Lvovyanka,” “Vika,” and “Gazel” cultivars by three to seven days compared to the Ca-OM untreated control. Ca-OM treatment in the early stages of the ontogenesis of currants provided a high percentage of Ca intake in berries. At the stage of complete maturation, the Ca content in berries decreased and depended on the ripening period of the cultivars. Before harvesting, Ca-OM increased the strength of berries (Fc) and reduced the shedding of berries in the clusters (Fs). At the vegetation stage, Ca-OM increased TSS in berries, and the content of TSS depended on the genotype and weather conditions. The Ca-OM treatment and low temperatures contributed to preserving berry density, reducing the shedding of berries and PLW, and restraining the development of diseases during storage. In addition, the high content of TSS and Ca in berries against the background of a slow rate of decrease in berry density in the Ca-OM variants ensured an extension of the shelf life of “Lvovyanka,” “Vika,” and “Gazel” by three to seven days compared to the control untreated with Ca-OM. Clustering analyses identified these cultivars as similar in terms of TSS and calcium content in fruits, emphasizing their common traits. The study underscores the potential of foliar Ca treatment to enhance berry quality during growth and storage, significantly improve storage duration, and fortify resistance against adverse factors, presenting promising opportunities for elevating yield and quality in specific red currant cultivars.

Influence of GA3 (gibberellic acid) and Ca(calcium) on root trait variation and osmotic potential of linseed (Linum usitatissimum L.) under chloride-dominated salinity

Linseed (Linum usitatissimum) is a versatile crop cultivated for its seeds, which are valuable source of ω-3 fatty acids. It adversely affected by soil salinity, as high salt levels can hinder their growth and reduce yields. To assess the potential for mitigating the adverse effects of high salinity concentrations, enhancing the resilience of three genotypes (Shekhar, Sheela, and Kartika) of linseed plants, this research aimed to find out the impact of Gibberellic acid (GA3) and Calcium (Ca) on various aspects of root morphology, osmotic potential of linseed, under varying levels of Cl- dominated salinity. The study employed three salinity levels (0, 5, and 10 dSm-1) and exogenous application of 10−6 M GA3 and/or 10 mg CaCl2 kg-1 in potted plants.The findings indicated that increasing salinity stress significantly (p≤0.05) affected root parameters, including total surface area(43.45%), average diameter(42.06%), total projected area(44.45%), length per volume (66.23%), root length, total root volume (73.23%), tips, forks,fine roots, and osmotic potential(66.67%). Correlations among linseed genotypes were observed between various root morphology and osmotic potential parameters. The application of GA3 and Ca effectively ameliorated the impact of salinity stress at its highest level (10 dSm-1), resulting in increased root parameters while decreasing the osmotic potential (Ψs). Both GA3 and Ca treatments significantly influenced root architecture and maintained optimal osmotic potential. The chloride-dominated salinity exerted inhibitory effects on all three genotypes’ (Shekhar, Sheela, and Kartika) root growth parameters while applying GA3 and Ca successfully mitigated these effects, enhancing root growth.

Effect of ladle-lining materials on inclusion evolution in Al-killed steel during LF refining

Abstract The effect of lining materials (Al2O3 and Al2O3–MgO·Al2O3) of ladle on evolution of non-metallic inclusions in aluminum-killed (Al-killed) steel during ladle furnace refining without Ca treatment was investigated through industrial experiments. The results showed that non-metallic inclusions experienced the changes from Al2O3 → MgO–Al2O3 → CaO–Al2O3. During the refining process using either of the two ladle lining materials, for all non-metallic inclusions, the vast majority are distributed in the high Al2O3 area of the CaO–Al2O3–MgO phase diagram, with very little or none in the low melting point zone. Non-metallic inclusions are mainly smaller than 3 μm, while those larger than 3 μm consisted primarily of MgO·Al2O3 and CaO–Al2O3 inclusions. The use of an Al2O3–MgO·Al2O3-lining ladle is more effective in reducing the number density of inclusions in the steel. However, during the refining process, the Al2O3-lining ladle does not have a significant impact on the presence of MgO–Al2O3 and CaO–Al2O3 inclusions in the molten steel. The Al2O3–MgO·Al2O3-lining ladle does not have a significant effect on MgO–Al2O3 inclusions, but it does promote the formation of CaO–Al2O3 and CaS inclusions in the molten steel.

Online Supervisory System for In-Process Optimization of Calcium Additions by Continuously Monitoring the State of Non-metallic Inclusions Inside Low-Alloyed Liquid Steels

A decision support system was developed using supervised machine learning (ML) approach for optimization of calcium (Ca) additions by continuously monitoring the physical state of non-metallic inclusions (NMIs) inside low-alloyed liquid steels. In this work, two instances were considered to design the base algorithm for the proposed supervisory system: (1) Clogging of submerged entry nozzle (SEN) during continuous casting of steels due to accumulation of solid oxide non-metallic inclusions (NMIs) and (2) Ca treatment during secondary steelmaking for modification of oxide NMIs from solid to liquid state to avoid SEN clogging. At first, experimental investigations were carried out on liquid steel samples from three low-alloyed Ca-treated steel grades from the same steel family to evaluate the characteristics of solid oxide NMIs that cause SEN clogging. In the next step, data-driven models were developed using an in-house ML algorithm trained primarily with process data for calculating the value of the newly proposed dummy parameter ‘Clog.’ These models, after testing, were architected to develop a supervisory system based on experimental investigations and data-driven models. The objective of this proposed supervisory system was to predict the optimum quantity of Ca needed for successful modification of NMIs from solid to liquid state to avoid SEN clogging based on the forecasted ‘Clog’ value. Finally, industrial data from ~ 3000 heats were tested to verify the results obtained from the developed supervisory system. The results confirmed that this novel supervisory system could predict the optimum class of Ca for all studied steel grades with 95 to 98 pct accuracy. The integration of this online supervisory system in steel production is expected to minimize operators’ corrective actions in achieving realistic control of Ca additions.