Ca-alginate Beads Research Articles

Stability and Bioaccessibility of Carotenoids from Sea Buckthorn Pomace Encapsulated in Alginate Hydrogel Beads.

Carotenoids, the natural pigments that confer the bright orange color of sea buckthorn berries, are also associated with several health benefits, such as antioxidant activity and skin and eye protection. Due to their lipophilic nature and localization, carotenoids are largely retained in the sea buckthorn pomace (SBP) resulting from juice production. Carotenoids from SBP (70.03 mg/100 g DW), extracted and characterized by HPLC-PDA, contained zeaxanthin (free and esterified) and beta-carotene as major compounds. The SBP carotenoids-enriched sunflower oil was further encapsulated in Ca-alginate hydrogel beads (98.4% encapsulation efficiency) using ionotropic gelation. The hydrogel beads were characterized by confocal laser scanning microscopy and scanning electron microscopy. Fairly good stability (>64%) of the encapsulated carotenoids in the alginate hydrogel beads during storage (30 days, 4 °C and 25 °C) was found, with zeaxanthin esters being the most stable compounds, for all the experimental conditions. The bioaccessibility of the total carotenoids (INFOGEST protocol) was 42.1 ± 4.6% from hydrated, and, respectively, 40.8 ± 4% from dehydrated SBP alginate hydrogel beads. The addition of yogurt to the dehydrated hydrogel beads had a positive effect on the bioaccessibility of free and esterified zeaxanthin, but not on that of the carotenes. In conclusion, SBP is a valuable source of carotenoids which can be protected by encapsulation in alginate hydrogel beads, thus still retaining a good bioaccessibility.

Optimizing conditions of mycelial inoculum immobilized in Ca-alginate beads: a case study in ectomycorrhizal fungus Astraeus odoratus.

Ectomycorrhizal inoculum has emerged as a critical tool for forest restoration, especially under challenging climate change conditions. The inoculation of selective ectomycorrhizal fungi can enhance seedling survival and subsequent growth in the field. This study optimized the liquid media for mycelial growth of Astraeus odoratus strain K1 and the sodium alginate solution composition for enhanced mycelial viability after entrapment. Using Modified Melin-Norkrans as the optimal media for mycelial cultivation and 2% sodium alginate supplemented with Czapek medium, 0.25% activated charcoal, 5% sucrose, and 5% sorbitol in the alginate solution yielded the highest viability of A. odoratus mycelia. Preservation in distilled water and 10% glycerol at 25°C for 60 days proved to be the most effective storage condition for the alginate beads. Both fresh and preserved alginate beads were tested for colonizing on Hopea odorata Roxb. seedlings, showing successful colonization and ectomycorrhizal root formation, with over 49% colonization. This study fills a crucial gap in biotechnology and ectomycorrhizal inoculum, paving the way for more effective and sustainable forest restoration practices.

Degradation of phenol by Rhodococcus pyridinivorans GM3 immobilization

One of the primary concerns of the environment is the increment of the xenobiotics levels, which are released in the natural ecosystem. Phenol has been documented as a pollutant because it has a significant role in water contamination; this will, therefore have an impact on the health of humans. Phenol degradation studies were carried out using a mineral salts medium containing various percentages (v/v) of Ca-alginate beads, polyurethane foam, agar-agar and agarose in batches of culture for 1.5 g/L phenol degradation by immobilized cells of Rhodococcus pyridinivorans GM3 during 24 hours of incubation at 32ºC, 200 rpm and pH 8.5. The results showed that a typical concentration of 3% (w/v) of the sodium alginate to form synthetic Ca-alginate beads was supporting phenol degradation which also emphasizes the structural stability of Ca-alginate beads. The concentration of 1.5 g/L phenol was completely degraded observed within 24 hours at 8% of the Ca-alginate beads immobilized cell and 10% of size cubes 0.125 cm3 of the polyurethane foam immobilized cell. Whilst, the degradation of 1.5 g/L of phenol concentration within 24 hours on both agar and agarose was 16% and 24% at cubes of size 0.125 cm3 and 1.0 cm3 respectively. However, the study of immobilization showed that Ca-alginate immobilized R. pyridinivorans GM3 was more efficient than polyurethane foam, agar and agarose.

Studies on Encapsulation of Gas Releasing Agent in Ca-Alginate Beads and Controlled Release Pattern of the Beads

Calcium alginate beads have been used to control release gases and volatile compounds for agricultural applications, drug delivery, waste treatment, and food product enhancement. The release rate of the gas and vapor depends on the diffusion of gas and vapor through the Ca-alginate gel matrix. However, the knowledge about the effect of process variables on the diffusion rate of gas and vapor still needs to be improved. Therefore, this study aims to investigate the effect of alginate concentration, gas release agent concentration, and bead size on the concentration of gas released from Ca-alginate beads. In this study, calcium carbonate was used as the model gas release agent, encapsulated in Ca-alginate beads to release carbon dioxide when the beads reacted with an acetic acid solution. The results showed that the concentration of carbon dioxide released by the beads depended on the bead diameter. The gas release rate was increased when the diameter of the beads was increased. The total amount of gas produced by the large beads was observed to be higher than that of small beads. Compared to small beads, large beads take longer to react completely to produce carbon dioxide gas. It was also found that the amount of carbon dioxide produced by the Ca-alginate beads was inversely proportional to alginate concentration but directly proportional to calcium carbonate concentration. The results indicated that the gas diffusion rate of the Ca-alginate beads can be tailored by adjusting the process variables of the Ca-alginate bead encapsulation process.

Managing municipal wastewater remediation employing alginate-immobilized marine diatoms and silver nanoparticles

Wastewater remediation has become a major environmental concern in recent years, which has led scientists to look for innovative sustainable solutions. Diatoms have emerged as a potentially effective solution for wastewater treatment, primarily because of their extraordinary ability to absorb nutrients and engage in metabolic processes. The present study aims to accomplish two goals, firstly, green synthesis of silver nanoparticles (AgNPs) utilizing marine diatoms Chaetoceros sp. and Thalassiosira sp. Secondly, encapsulation of diatoms within a Ca-alginate hydrogel bead developed via the gelation method thus introducing a novel way to assess their effectiveness in nutrient bioremediation from wastewater. The study reveals that Thalassiosira sp. mediated AgNPs are very effective in removing phosphate and nitrate, with 74% and 65% removal rates respectively. Conversely, Chaetoceros sp. mediated AgNPs significantly decreased chemical oxygen demand (COD) by 73%. Furthermore, Thalassiosira sp. encapsulated in Ca-alginate hydrogel beads demonstrated significant removal rates: 64% for nitrate, 91% for phosphate, and 78% for COD, respectively. Furthermore, the biochemical profiles of both diatom-entrapped alginate beads were remarkable, and the approach shows potential for effective and sustainable wastewater treatment methods, which can further be investigated for long-term performance, scalability, and environmental impact on sustainability.

Influence of the Immobilization Technique on the Productivity of Enzymes in the Cascade Reduction of CO2 to CH3OH

The enzymatic effectiveness in the reaction cascade that reduces CO2 to methanol in water at room‐temperature faces various constraints. One of the major challenges is the short life of costly enzymes: immobilization is used to make them more stable and recyclable. The comparative analysis of the several immobilization techniques reported in the literature is challenging due to the diverse reaction conditions (single enzyme test or pool of enzymes test) and experimental setups, as well as the high variability in the amount of enzymes and cofactor. In the present study, a comparison is presented among three different methods (co‐encapsulation into Ca–alginate beads, co‐absorption onto zirconium(IV) phosphate (ZrP) and covalent binding to dialdehydecellulose [DAC]) of co‐immobilization of the three dehydrogenases Fatedehydrogenase (DH), FaldDH, and alcohol dehydrogenase, used in equal amount and under the same experimental conditions, so to check at what extension the support and the immobilization method can influence the activity of the enzymatic pool. DAC is used for the first time to support the three DHs and results to be the best method of immobilization with respect to those used here, that also allows longer life on enzymes and repeated recycling of the supported enzymes, increasing the overall methanol production with respect to the free enzymes.

Application of biomacromolecules encapsulation systems for the long-term storage of Lactobacillus plantarum F1 and Lactobacillus reuteri 182

The aim of this study was to improve the viability of lactic acid bacteria (LAB) during extended storage of 1 year and mechanical characteristics of the calcium alginate beads with co-encapsulation of prebiotics and chitosan coating and subsequent freeze drying. The results revealed that the addition of trehalose to alginate matrix effectively protects the LAB cells during freeze drying, i.e., the survival rate has increased up to more than 92.5 %. Chitosan coating reinforced Ca-alginate beads, therefore the sphericity and mechanical strength of the beads improved. The findings also showed that bacteria encapsulation with the prebiotics resulted in more cells stability during the prolonged storage of 1 year and were 4.82 ± 0.06 log CFU g−1 in the lyophilized alginate-trehalose beads for Lactobacillus plantarum and 5.64 ± 0.08 log CFU g−1 in the lyophilized alginate-trehalose-inulin beads for Lactobacillus reuteri. No survival, however, was noted for the LAB cells in wet capsules after the same period. This study demonstrated that prebiotics had a significant impact on the viability of cells during freeze drying and storage. What is more, physical properties of the alginate beads were enhanced by coating beads with the chitosan.

Alginate-Based Carriers Loaded with Mulberry (Morus alba L.) Leaf Extract: A Promising Strategy for Prolonging 1-Deoxynojirimicyn (DNJ) Systemic Activity for the Nutraceutical Management of Hyperglycemic Conditions.

The iminosugar 1-deoxynojirimicyn (DNJ) contained in mulberry leaves has displayed systemic beneficial effects against disorders of carbohydrate metabolism. Nevertheless, its effect is impaired by the short half-life. Alginate-based carriers were developed to encapsulate a DNJ-rich mulberry extract: Ca-alginate beads, obtained by external gelation, and spray-dried alginate microparticles (SDMs). Mean size and distribution, morphology, drug loading, encapsulation efficiency, experimental yield, and release characteristics were determined for the two formulations. Ca-alginate beads and SDMs exhibited an encapsulation efficiency of about 54% and 98%, respectively, and a DNJ loading in the range of 0.43-0.63 μg/mg. The in vitro release study demonstrated the carriers' capability in controlling the DNJ release in acid and basic conditions (<50% in 5 h), due to electrostatic interactions, which were demonstrated by 1H-NMR relaxometry studies. Thus, alginate-based particles proved to be promising strategies for producing food supplements containing mulberry leaf extracts for the management of hyperglycemic state.

Enrichment of sunflower oil with tomato carotenoids and its encapsulation in Ca-alginate beads: Preparation, characterization and chemical stability upon in vitro digestion

Carotenoids from tomatoes are not only responsible for the vibrant red color of the fruits but, being powerful antioxidants, they also play a crucial role in enhancing the nutritional value and the health benefits of the raw fruits and products derived therefrom. The extraction of tomato carotenoids with the aid of ultrasounds and sunflower oil as a solvent medium, was explored in this work. Extraction parameters such as duration of sonication (min) and solvent:solid ratio (v/w) were optimized using response surface methodology (RSM). In a subsequent step, the obtained tomato carotenoids-enriched sunflower oil was encapsulated in Ca-alginate beads (three-dimensional cross-linked microgel particles) using ionotropic gelation. The fabricated alginate beads loaded with tomato carotenoids were characterized with a variety of analytical techniques, i.e., optical and confocal laser scanning microscopy (CLSM), chromatometry, Fourier Transform Infrared spectroscopy (FT-IR) and Raman spectroscopy, in order to obtain information regarding their size, shape, chroma as well as the molecular interactions among constituents present in the alginate beads. The encapsulation yield (%) and encapsulation efficiency (%) were found to be satisfactory. Moreover, the swelling behaviour as well as the chemical stability of tomato carotenoids in the oil phase under simulated in vitro gastrointestinal digestion conditions were evaluated. The developed processing approach offers an alternative route for the design of biodegradable and biocompatible carriers of tomato carotenoids-enriched sunflower oil preparations that could be used in food, pharmaceutical and cosmeceutical applications for protection and delivery of such non-polar bioactives derived from agricultural commodities and/or their by-products and wastes.

Comparative study on mechanisms of gases release from Ca-alginate beads

Calcium alginate (Ca-alginate) beads have attracted considerable attention as carriers for the controlled release of volatile compounds due to their biocompatibility and tunable properties. This study aimed to compare the release of ethylene and carbon dioxide gas from Ca-alginate beads. Ca-alginate beads were prepared from a sodium alginate solution containing ethephon and calcium carbonate as the gas-forming agent. The resulting solution was then extruded into a calcium chloride solution. The gas release behavior was studied by monitoring the concentration of released gases over time using gas detectors. Extrusion tip diameter, alginate concentration and gas-releasing agent concentration were systematically varied to assess their effect on the gas release rate. The results indicated distinct release patterns for ethylene and carbon dioxide gas. Ethylene gas exhibited a relatively slower and sustained release, while carbon dioxide gas exhibited a more rapid release. Moreover, the bead size influenced the gas release, with larger beads displaying faster release rates for ethylene and carbon dioxide gas. The concentration of alginate also played a role in modulating the release kinetics, with higher alginate concentration resulting in slower gas release. The findings have implications for designing and optimizing Ca-alginate-based systems for agricultural applications, including plant hormone delivery and modified atmosphere packaging.

Structural stability and release properties of emulsion-alginate beads under gastrointestinal conditions

Ca-alginate beads are promising vehicles for targeted release, amongst others for oil. The release pattern is largely determined by the structural stability of such hydrogels (i.e., shrinking, swelling, or even disintegration), albeit that these processes are poorly understood. We designed a range of alginate hydrogel beads with different alginates (M/G ratio 1.2 or 2.1) and oil content (20–54%), and monitored their behaviour under simulated gastrointestinal conditions (INFOGEST protocol).Low M/G ratio emulsion-alginate gels were mechanically stronger than their counterparts prepared with high M/G ratio alginate. Beads prepared with high M/G ratio alginate swelled and disintegrated under gastric and intestinal conditions, with a high oil load contributing to reduced structural stability. This could be mitigated by using a higher Ca2+ concentration (10 mM), confirming that calcium plays a key role in structural stability.The actual release of fatty acids was co-determined by the properties of the hydrogel and their disintegration, which was further enhanced by extended oil digestion. Depending on the release pattern required to achieve a target, both mechanisms can be considered. For release in the more distal gastrointestinal (GI) tract, the structure needs to be maintained for longer, which is possible through the use of low M/G ratio alginate in combination with higher Ca2+ concentration (10 mM). These insights contribute to the development of alginate-based vehicles that can deliver their payload target to the small intestine or colon.

Alpha-glucan: a novel bacterial polysaccharide and its application as a biosorbent for heavy metals

This study identified an extracellular bacterial polysaccharide produced by Bacillus velezensis strain 40B that contains more than 90% of the monosaccharide glucose as alpha-glucan. A prominent peak at 1074 cm−1, a characteristic of glycoside couplings, was visible in the FTIR spectrum. There were traces of xylose, sucrose, and lactose, according to the HPLC study. The ability of this bacterial glucan to operate as a biosorbent of the heavy metals cobalt, chromium, copper, and lead from aqueous solutions was investigated in conjunction with Ca-alginate beads. It proved that glucan 40B has a low affinity for chromium ions and is selective for lead. Initial concentration measurements showed an inverse relationship between concentration and the amount of metal ions eliminated. Lead and chromium removal increased as the glucan dose was increased. It was shown that as the pH of the starting solution is elevated, there is an increase in the sorption of metal ions onto the glucan. It was clear that when the temperature increased, the fraction of metal ion sorption slightly increased. Glucan has a wide range of industrial applications, from food and medicine to health and nutrition. As a result, the investigation’s scope was expanded to include heavy metal removal.

Immobilization of Rhodococcus by encapsulation and entrapment: a green solution to bitter citrus by-products.

Debittering of citrus by-products is required to obtain value-added compounds for application in the food industry (e.g., dietary fiber, bioactive compounds). In this work, the immobilization of Rhodococcus fascians cells by encapsulation in Ca-alginate hollow beads and entrapment in poly(vinyl alcohol)/polyethylene glycol (PVA/PEG) cryogels was studied as an alternative to chemical treatments for degrading the bitter compound limonin. Previously, the Rhodococcus strain was adapted using orange peel extract to increase its tolerance to limonoids. The optimal conditions for the encapsulation of microbial cells were 2% Na-alginate, 4% CaCl2, 4% carboxymethylcellulose (CMC), and a microbial load of 0.6 OD600 (optical density at 600nm). For immobilization by entrapment, the optimal conditions were 8% PVA, 8% PEG, and 0.6 OD600 microbial load. Immobilization by entrapment protected microbial cells better than encapsulation against the citrus medium stress conditions (acid pH and composition). Thus, under optimal immobilization conditions, limonin degradation was 32 and 28% for immobilization in PVA/PEG gels and in hollow beads, respectively, in synthetic juice (pH 3) after 72h at 25°C. Finally, the microbial cells entrapped in the cryogels showed a higher operational stability in orange juice than the encapsulated cells, with four consecutive cycles of reuse (runs of 24h at 25°C). KEY POINTS: • Increased tolerance to limonoids by adapting R. fascians with citrus by-products. • Entrapment provided cells with favorable microenvironment for debittering at acid pH. • Cryogel-immobilized cells showed the highest limonin degradation in citrus products.

Preparation of new alginate capsules enclosing diatomite and organic extractants to uptake lanthanum

The present study conducted syntheses of Ca-alginate composite beads, which involved trioctyl-amine (TOA), tributyl phosphate (TBP), trioctylphosphine oxide (TOPO) organic extractants, and diatomite for separation of La(III) ions from dilute aqueous solutions. The surface morphology of the capsules was examined under Scanning Electron Microscopy, while their chemical structure was characterized using Fourier Transform Infrared Spectroscopy. Alginate composites were prepared by adding concentrations of TBP (1%–10%), TOPO (0.005 M–0.09 M) and TOA (1%–10%) organic extractants to the Na-alginate-diatomite mixture.The effects of various parameters on adsorption such as solution pH, contact time, metal ion concentration, and temperature, were individually tested using standard solutions of La(III). The maximum uptake capacity of the alginate composite adsorbent, consisting of TOA, diatomite, and alginate for La(III) ions, was examined at 25 °C. Adsorption data were analyzed using Langmuir, Freundlich, Dubinin–Radushkevich (D-R), Temkin, Flory-Huggins and Brunauer, and Emmett and Teller (BET) isotherm models. The biosorption isotherm parameters were estimated by both linear and nonlinear regression analyses. The results indicate that the Langmuir model provides a better fit than the other models for the adsorption equilibrium data.Thermodynamic parameters such as variations of enthalpy, entropy, and Gibbs free energy were calculated. The maximum uptake capacity of the alginate composite adsorbent, including TOA, diatomite, and alginate for La(III) ions from aqueous solutions was found to be 146.4 mg/g. The adsorption efficiency in dilute solutions was determined to be 97.2%.

An analysis of the processes, kinetics and equilibrium of iron's biosorption on immobilized green microalgae

Metals including Cu, Cd, Ni, Pb, Zn, Hg, Fe and Cr can be found in significant concentrations in acid mine drainage effluent from previous gold mining operations. Even at very low levels, heavy metals and their compounds are very toxic, carcinogenic, mutagenic and teratogenic. Acid mine drainage discharge must therefore be properly treated before disposal. In this study, iron removal from acid mine drainage effluent using immobilized green microalgae is explored. The impact of pH on iron metal concentrations was studied at multiple pH values between 2 and 12 using 0.1 M HCl or NaOH solutions. At pH 6, the optimal value, 82% and 90% of Fe (II) were removed from Ca-alginate beads and immobilized Desmodesmus sp., respectively. It was shown that Fe (II) ions were biosorbed by immobilized microalgae cells in a pseudo-second-order manner. This study demonstrated how immobilized green microalgae showed potential to remove iron from acid mine drainage effluent.

Biodegradation of Phenol Using the Indigenous Rhodococcus pyridinivorans Strain PDB9T NS-1 Immobilized in Calcium Alginate Beads.

Phenolic compounds are the major contaminants identified from various industrial effluents, which pose an extreme threat to the environment. Therefore, investigating an effective technique to remove these toxic phenolic compounds from the contaminated environment is very essential. In the present investigation, batch tests were performed to assess the biodegradation of phenol using an indigenous Rhodococcus pyridinivorans strain PDB9T NS-1 encapsulated in a calcium alginate bead system. In order to improve the mechanical stability, silica was added to the cell-embedded Ca-alginate beads. The impact of experimental conditions such as contact time, pH, and initial phenol doses was investigated. The biodegradation of phenol was examined over a wide range of phenol, and the results showed that more than 99.6% degradation was achieved at an initial phenol dose of 1000 mg/L in 70 h at 30 °C. Among the various sorption isotherm tested, the Freundlich isotherm was the best fitted to the experimental data. This behavior indicated a multilayer biosorption process and was controlled by heterogeneous surface energy. Based on an intra-particle diffusion model, internal mass transfer or pore diffusion predominated over exterior mass transfer in controlling the entire phenol biosorption process. The biosorption of phenol onto the cell encapsulated in the Ca-alginate bead follows pseudo-first-order kinetics with a superior phenol biosorption capacity of 155 mg/g of Ca-alginate. Further stability study revealed that the bead could be recycled successfully without any substantial decline in phenol degradation efficiency, indicating that the immobilized microbe possesses exceptional operating stability.

Monascus Yellow Pigment Production by Coupled Immobilized-Cell Fermentation and Extractive Fermentation in Nonionic Surfactant Micelle Aqueous Solution

Microbial fermentation with immobilized cells possesses many advantages. However, this fermentation mode is restricted to the production of extracellular products. Our previous study demonstrated that the extractive fermentation of Monascus spp. in nonionic surfactant micelle aqueous solution can export Monascus pigments that are supposed to be mainly intracellular products to extracellular culture broth and, in the meantime, extracellularly enhance the production of yellow pigments at a low pH condition; consequently, this makes the continuous production of yellow pigments with immobilized Monascus cells feasible. In this study, immobilized-cell fermentation and extractive fermentation in Triton X-100 micelle aqueous solution were successfully combined to continuously produce Monascus yellow pigments extracellularly. We examined the effects of cell immobilization and Triton X-100 on cell growth, pigment production, and pigment composition. In the repeated-batch extractive fermentation with immobilized cells, the biomass in Ca-alginate gel beads continued to grow and reached 21.2 g/L after seven batches, and dominant yellow pigments were produced extracellularly and stable for each batch. The mean productivity of the extracellular yellow pigments reached up to 22.31 AU410 nm/day within the first four batches (13 days) and 19.7 AU410 nm/day within the first seven batches (25 days). The results also provide a new strategy for producing such intracellular products continuously and extracellularly.

Simultaneous removal of Ni2+, Cd2+ and Cr6+ from an aqueous solution by using native algal biomass loaded in Ca-alginate beads

Simultaneous removal of Ni2+, Cd2+ and Cr6+ from an aqueous solution by using native algal biomass loaded in Ca-alginate beads

Enhanced growth and lipid productivity by living Chlorella sorokiniana immobilized in Ca-alginate beads

The bottleneck for the production of biofuels from microalgae consists on costly harvesting processes and low lipid production, immobilization technology could play a part on making the production of biofuels more feasible. The aim of this study was to evaluate the effect of alginate immobilization on the growth and lipid productivity of the microalgae Chlorella sorokiniana, so far, the main focus of immobilization technology has been its use for wastewater treatment and nutrient removal from effluents. The microalgae Chlorella sorokiniana was cultured in both free and immobilized forms under optimal autotrophic growth conditions. Microalgae were immobilized in calcium alginate beads generated by mixing algal cells with a sodium alginate solution, followed by extrusion into a CaCl2 solution. The results obtained in this study showed that the growth of the microalgae immobilized in alginate beads, was enhanced and achieved a dry cell weight 1.4-fold higher than that of a free cell culture, a higher light transmittance was also achieved in the alginate immobilized culture, and the lipid productivity was increased from 54.21 ± 2.48 mg l−1 d in the free cell culture to 82.22 ± 8.48 mg l−1 d in the immobilized culture. These results demonstrate the effectiveness of immobilization technology for promoting growth and lipid productivity in the microalgae Chlorella sorokiniana.

Entrapment of polyethylene terephthalate derived carbon in Ca-alginate beads for solid phase extraction of polycyclic aromatic hydrocarbons from environmental water samples

• Novel SPE sorbent based on PET based AC were prepared by a facile cross-linking procedure. • GAC shows outstanding efficiency for PAHs extraction from environmental water samples. • The proposed SPE method illustrated high sensitivity and precision. In this study, granular activated carbon (GAC) from polyethyleneterephthalate (PET) bottle waste was employed for the solid phase extraction (SPE) of trace levels of some polycyclic aromatic hydrocarbons (PAHs) in environmental waters. The structure of GAC was studied using scanning electron microscopy (SEM), X-ray diffraction analysis (XRD) and Brunauer-Emmett-Teller (BET) adsorption technique. Using high performance liquid chromatography coupled with an ultraviolet detector (HPLC-UV) system, the produced porous sorbent was used for the extraction and measurement of trace levels of PAHs. Due to its high porosity and easy collection, the GAC can be considered as a potential solid phase sorbent towards PAHs. The experimental factors such as GAC mass, sorption time, elution solvent and salt concentration were explored and optimized. The linear dynamic ranges and detection limits under optimal conditions were in the range of 0.1-200 ng mL -1 and 0.01-0.07 ng mL -1 , respectively. The analysis of PAHs in the real water samples using this platform was successfully investigated with appropriate recovery values (93.5% to 102.2%).