A new experimental set-up for a simultaneous measurement of neutron induced capture and fission cross sections was designed, assembled and optimized. The measurements will be performed at GEel LINear Accelerator (GELINA) neutron time- of-flight facility in Belgium, where neutron cross sections can be measured over a wide energy range with high energy resolution. The fission events detector consists of a dedicated multi-plate high efficiency fission ionization chamber (IC). The -rays produced in capture reaction are detected by an efficient array of C6D6 scintillators. Fission -rays events are distinguished from capture events by the anticoincidence signals from the IC and the C6D6 detectors. For the undetected fission events a correction has to be applied with respect to the efficiency of the IC that should be high and known with a high precision. Another important issue is the good separation between fission-fragment (FF) and the high alpha pile-up. The performances of the IC during test experiments are presented, focusing in particular on the detection efficiency.