C1 Substrates Research Articles

Utilization of formic acid by extremely thermoacidophilic archaea species.

The exploration of novel hosts with the ability to assimilate formic acid, a C1 substrate that can be produced from renewable electrons and CO2, is of great relevance for developing novel and sustainable biomanufacturing platforms. Formatotrophs can use formic acid or formate as a carbon and/or reducing power source. Formatotrophy has typically been studied in neutrophilic microorganisms because formic acid toxicity increases in acidic environments below the pKa of 3.75 (25°C). Because of this toxicity challenge, utilization of formic acid as either a carbon or energy source has been largely unexplored in thermoacidophiles, species that possess the ability to produce a variety of metabolites and enzymes of high biotechnological relevance. Here we investigate the capacity of several thermoacidophilic archaea species from the Sulfolobales order to tolerate and metabolize formic acid. Metallosphaera prunae, Sulfolobus metallicus and Sulfolobus acidocaldarium were found to metabolize and grow with 1-2 mM of formic acid in batch cultivations. Formic acid was co-utilized by this species alongside physiological electron donors, including ferrous iron. To enhance formic acid utilization while maintaining aqueous concentrations below the toxicity threshold, we developed a bioreactor culturing method based on a sequential formic acid feeding strategy. By dosing small amounts of formic acid sequentially and feeding H2 as co-substrate, M. prunae could utilize a total of 16.3 mM of formic acid and grow to higher cell densities than when H2 was supplied as a sole electron donor. These results demonstrate the viability of culturing thermoacidophilic species with formic acid as an auxiliary substrate in bioreactors to obtain higher cell densities than those yielded by conventional autotrophic conditions. Our work underscores the significance of formic acid metabolism in extreme habitats and holds promise for biotechnological applications in the realm of sustainable energy production and environmental remediation.

A synthetic cell-free pathway for biocatalytic upgrading of one-carbon substrates.

Biotechnological processes hold tremendous potential for the efficient and sustainable conversion of one-carbon (C1) substrates into complex multi-carbon products. However, the development of robust and versatile biocatalytic systems for this purpose remains a significant challenge. In this study, we report a hybrid electrochemical-biochemical cell-free system for the conversion of C1 substrates into the universal biological building block acetyl-CoA. The synthetic reductive formate pathway (ReForm) consists of five core enzymes catalyzing non-natural reactions that were established through a cell-free enzyme engineering platform. We demonstrate that ReForm works in a plug-and-play manner to accept diverse C1 substrates including CO2 equivalents. We anticipate that ReForm will facilitate efforts to build and improve synthetic C1 utilization pathways for a formate-based bioeconomy.

Methanol as a co-substrate with CO2 enhances butyrate production in microbial electrosynthesis

Methanol is a promising feedstock for the bio-based economy as it can be derived from organic waste streams or produced electrochemically from CO2. Acetate production from CO2 in microbial electrosynthesis (MES) has been widely studied, while more valuable compounds such as butyrate are currently attracting attention. In this study, methanol was used as a co-substrate with CO2 to enhance butyrate production in MES. Feeding with CO2 and methanol resulted in the highest butyrate production rates and titres of 0.36 ± 0.01 g L−1 d−1 and 8.6 ± 0.2 g L−1, respectively, outperforming reactors with only CO2 feeding (0.20 ± 0.03 g L−1 d−1 and 5.2 ± 0.1 g L−1, respectively). Methanol acted as electron donor and as carbon source, both of which contributed ca. 50% of the carbon in the products. Eubacterium was the dominant genus with 52.6 ± 2.5% relative abundance. Thus, we demonstrate attractive route for the use of the C1 substrates, CO2 and methanol, to produce mainly butyrate.Key points• Butyrate was the main product from methanol and CO2in MES• Methanol acted as both carbon and electron source in MES• Eubacterium dominating microbial culture was enriched in MESGraphical

Choline degradation in Paracoccus denitrificans: identification of sources of formaldehyde.

Paracoccus denitrificans is a facultative methylotroph that can grow on methanol and methylamine as sole sources of carbon and energy. Both are oxidized to formaldehyde and then to formate, so growth on C1 substrates induces the expression of genes encoding enzymes required for the oxidation of formaldehyde and formate. This induction involves a histidine kinase response regulator pair (FlhSR) that is likely triggered by formaldehyde. Catabolism of some complex organic substrates (e.g., choline and L-proline betaine) also generates formaldehyde. Thus, flhS and flhR mutants that fail to induce expression of the formaldehyde catabolic enzymes cannot grow on methanol, methylamine, and choline. Choline is oxidized to glycine via glycine betaine, dimethylglycine, and sarcosine. By exploring flhSR growth phenotypes and the activities of a promoter and enzyme known to be upregulated by formaldehyde, we identify the oxidative demethylations of glycine betaine, dimethylglycine, and sarcosine as sources of formaldehyde. Growth on glycine betaine, dimethylglycine, and sarcosine is accompanied by the production of up to three, two, and one equivalents of formaldehyde, respectively. Genetic evidence implicates two orthologous monooxygenases in the oxidation of glycine betaine. Interestingly, one of these appears to be a bifunctional enzyme that also oxidizes L-proline betaine (stachydrine). We present preliminary evidence to suggest that growth on L-proline betaine induces expression of a formaldehyde dehydrogenase distinct from the enzyme induced during growth on other formaldehyde-generating substrates.IMPORTANCEThe bacterial degradation of one-carbon compounds (methanol and methylamine) and some complex multi-carbon compounds (e.g., choline) generates formaldehyde. Formaldehyde is toxic and must be removed, which can be done by oxidation to formate and then to carbon dioxide. These oxidations provide a source of energy; in some species, the CO2 thus generated can be assimilated into biomass. Using the Gram-negative bacterium Paracoccus denitrificans as the experimental model, we infer that oxidation of choline to glycine generates up to three equivalents of formaldehyde, and we identify the three steps in the catabolic pathway that are responsible. Our work sheds further light on metabolic pathways that are likely important in a variety of environmental contexts.

A Light-Driven InVitro Enzymatic Biosystem for the Synthesis of α-Farnesene from Methanol.

Terpenoids of substantial industrial interest are mainly obtained through direct extraction from plant sources. Recently, microbial cell factories or invitro enzymatic biosystems have emerged as promising alternatives for terpenoid production. Here, we report a route for the synthesis of α-farnesene based on an invitro enzyme cascade reaction using methanol as an inexpensive and renewable C1 substrate. Thirteen biocatalytic reactions divided into 2 modules were optimized and coupled to achieve methanol-to-α-farnesene conversion via integration with natural thylakoid membranes as a green energy engine. This invitro enzymatic biosystem driven by light enabled the production of 1.43 and 2.40 mg liter-1 α-farnesene using methanol and the intermediate glycolaldehyde as substrates, respectively. This work could provide a promising strategy for developing light-powered invitro biosynthetic platforms to produce more natural compounds synthesized from C1 substrates.

Progresses and challenges of engineering thermophilic acetogenic cell factories.

Thermophilic acetogens are gaining recognition as potent microbial cell factories, leveraging their unique metabolic capabilities to drive the development of sustainable biotechnological processes. These microorganisms, thriving at elevated temperatures, exhibit robust carbon fixation abilities via the linear Wood-Ljungdahl pathway to efficiently convert C1 substrates, including syngas (CO, CO2 and H2) from industrial waste gasses, into acetate and biomass via the central metabolite acetyl-CoA. This review summarizes recent advancements in metabolic engineering and synthetic biology efforts that have expanded the range of products derived from thermophilic acetogens after briefly discussing their autotrophic metabolic diversity. These discussions highlight their potential in the sustainable bioproduction of industrially relevant compounds. We further review the remaining challenges for implementing efficient and complex strain engineering strategies in thermophilic acetogens, significantly limiting their use in an industrial context.

Harnessing acetogenic bacteria for one-carbon valorization toward sustainable chemical production.

The pressing climate change issues have intensified the need for a rapid transition towards a bio-based circular carbon economy. Harnessing acetogenic bacteria as biocatalysts to convert C1 compounds such as CO2, CO, formate, or methanol into value-added multicarbon chemicals is a promising solution for both carbon capture and utilization, enabling sustainable and green chemical production. Recent advances in the metabolic engineering of acetogens have expanded the range of commodity chemicals and biofuels produced from C1 compounds. However, producing energy-demanding high-value chemicals on an industrial scale from C1 substrates remains challenging because of the inherent energetic limitations of acetogenic bacteria. Therefore, overcoming this hurdle is necessary to scale up the acetogenic C1 conversion process and realize a circular carbon economy. This review overviews the acetogenic bacteria and their potential as sustainable and green chemical production platforms. Recent efforts to address these challenges have focused on enhancing the ATP and redox availability of acetogens to improve their energetics and conversion performances. Furthermore, promising technologies that leverage low-cost, sustainable energy sources such as electricity and light are discussed to improve the sustainability of the overall process. Finally, we review emerging technologies that accelerate the development of high-performance acetogenic bacteria suitable for industrial-scale production and address the economic sustainability of acetogenic C1 conversion. Overall, harnessing acetogenic bacteria for C1 valorization offers a promising route toward sustainable and green chemical production, aligning with the circular economy concept.

Enzymatic Carboxylation of Resorcinol in Aqueous Triethanolamine at Elevated CO2 Pressure.

The fixation of CO2 by enzymatic carboxylation for production of valuable carboxylic acids is one way to recycle carbon. Unfortunately, this type of reaction is limited by an unfavourable thermodynamic equilibrium. An excess of the C1 substrate is required to increase conversions. Solvents with a high CO2 solubility, such as amines, can provide the C1 substrate in excess. Here, we report on the effect of CO2 pressures up to 1100 kPa on the enzymatic carboxylation of resorcinol in aqueous triethanolamine. Equilibrium yields correlate to the bicarbonate concentration. However, inhibition is observed at elevated pressure, severely reducing the enzyme activity. The reaction yields were reduced at higher pressures, whereas at ambient pressure, higher yields were achieved. Overall, CO2 pressures above 100 kPa have been demonstrated to be counterproductive for improving the biotransformation, as productivity decreases rapidly for only a modest improvement in conversion. It is expected that CO2 carbamylation intensifies at elevated CO2 pressures, causing the inhibition of the enzyme. To further increase the reaction yield, the in situ product precipitation is tested by the addition of the quaternary ammonium salt tetrabutylammonium bromide.

Imbalanced metabolism induced NH4+ accumulation and its effect on the central metabolism of Methylomonas sp. ZR1.

Nitrogen and carbon are the two most essential nutrient elements, and their metabolism is tightly coupled in single carbon metabolic microorganisms. However, the nitrogen metabolism and the nitrogen/carbon (N/C) metabolic balance in single-carbon metabolism is poorly studied. In this study, the nitrogen metabolism pattern of the fast growing methanotrophs Methylomonas sp. ZR1 grown in methane and methanol was studied. Effect study of different nitrogen sources on the cell growth of ZR1 indicates that nitrate salts are the best nitrogen source supporting the growth of ZR1 using methane and methanol as carbon source. However, its metabolic intermediate ammonium was found to accumulate with high N/C ratio in the medium and consequently inhibit the growth of ZR1. Studies of carbon and nitrogen metabolic kinetic under different N/C ratio conditions indicate that the accumulation of NH4+ is caused by the imbalanced nitrogen and carbon metabolism in ZR1. Feeding carbon skeleton α-ketoglutaric acid could effectively relieve the inhibition effect of NH4+ on the growth of ZR1, which further confirms this assumption. qPCR analysis of the expression level of the central metabolic key enzyme gene indicates that the nitrogen metabolic intermediate ammonium has strong regulation effect on the central nitrogen and carbon metabolism in ZR1. qPCR-combined genomic analysis confirms that a third ammonium assimilation pathway glycine synthesis system is operated in ZR1 to balance the nitrogen and carbon metabolism. Based on the qPCR result, it was also found that ZR1 employs two strategies to relieve ammonium stress in the presence of ammonium: assimilating excess ammonium or cutting off the nitrogen reduction reactions according to the available C1 substrate. Validating the connections between single-carbon and nitrogen metabolism and studying the accumulation and assimilation mechanism of ammonium will contribute to understand how nitrogen regulates cellular growth in single-carbon metabolic microorganisms.

The potential of CO2-based production cycles in biotechnology to fight the climate crisis.

Rising CO2 emissions have pushed scientists to develop new technologies for a more sustainable bio-based economy. Microbial conversion of CO2 and CO2-derived carbon substrates into valuable compounds can contribute to carbon neutrality and sustainability. Here, we discuss the potential of C1 carbon sources as raw materials to produce energy, materials, and food and feed using microbial cell factories. We provide an overview of potential microbes, natural and synthetic C1 utilization pathways, and compare their metabolic driving forces. Finally, we sketch a future in which C1 substrates replace traditional feedstocks and we evaluate the costs associated with such an endeavor.

Genomic potential and physiological characteristics of C1 metabolism in novel acetogenic bacteria.

Acetogenic bacteria can utilize C1 compounds, such as carbon monoxide (CO), formate, and methanol, via the Wood-Ljungdahl pathway (WLP) to produce biofuels and biochemicals. Two novel acetogenic bacteria of the family Eubacteriaceae ES2 and ES3 were isolated from Eulsukdo, a delta island in South Korea. We conducted whole genome sequencing of the ES strains and comparative genome analysis on the core clusters of WLP with Acetobacterium woodii DSM1030T and Eubacterium limosum ATCC8486T. The methyl-branch cluster included a formate transporter and duplicates or triplicates copies of the fhs gene, which encodes formyl-tetrahydrofolate synthetase. The formate dehydrogenase cluster did not include the hydrogenase gene, which might be replaced by a functional complex with a separate electron bifurcating hydrogenase (HytABCDE). Additionally, duplicated copies of the acsB gene, encoding acetyl-CoA synthase, are located within or close to the carbonyl-branch cluster. The serum bottle culture showed that ES strains can utilize a diverse range of C1 compounds, including CO, formate, and methanol, as well as CO2. Notably, ES2 exhibited remarkable resistance to high concentrations of C1 substrates, such as 100% CO (200 kPa), 700 mM formate, and 500 mM methanol. Moreover, ES2 demonstrated remarkable growth rates under 50% CO (0.45 h-1) and 200 mM formate (0.34 h-1). These growth rates are comparable to or surpassing those previously reported in other acetogenic bacteria. Our study introduces novel acetogenic ES strains and describes their genetic and physiological characteristics, which can be utilized in C1-based biomanufacturing.

Lactate formation from fructose or C1 compounds in the acetogen Acetobacterium woodii by metabolic engineering

Anaerobic, acetogenic bacteria are promising biocatalysts for a sustainable bioeconomy since they capture and convert carbon dioxide to acetic acid. Hydrogen is an intermediate in acetate formation from organic as well as C1 substrates. Here, we analyzed mutants of the model acetogen Acetobacterium woodii in which either one of the two hydrogenases or both together were genetically deleted. In resting cells of the double mutant, hydrogen formation from fructose was completely abolished and carbon was redirected largely to lactate. The lactate/fructose and lactate/acetate ratios were 1.24 and 2.76, respectively. We then tested for lactate formation from methyl groups (derived from glycine betaine) and carbon monoxide. Indeed, also under these conditions lactate and acetate were formed in equimolar amounts with a lactate/acetate ratio of 1.13. When the electron-bifurcating lactate dehydrogenase/ETF complex was genetically deleted, lactate formation was completely abolished. These experiments demonstrate the capability of A. woodii to produce lactate from fructose but also from promising C1 substrates, methyl groups and carbon monoxide. This adds an important milestone towards generation of a value chain leading from CO2 to value-added compounds.Key points• Resting cells of the ΔhydBA/hdcr mutant of Acetobacterium woodii produced lactate from fructose or methyl groups + CO• Lactate formation from methyl groups + CO was completely abolished after deletion of lctBCD• Metabolic engineering of a homoacetogen to lactate formation gives a potential for industrial applications

Core and auxiliary functions of one-carbon metabolism in Pseudomonas putida exposed by a systems-level analysis of transcriptional and physiological responses.

The soil bacterium Pseudomonas putida is a robust biomanufacturing host that assimilates a broad range of substrates while efficiently coping with adverse environmental conditions. P. putida is equipped with functions related to one-carbon (C1) compounds (e.g. methanol, formaldehyde, and formate) oxidation-yet pathways to assimilate these carbon sources are largely absent. In this work, we adopted a systems-level approach to study the genetic and molecular basis of C1 metabolism in P. putida. RNA sequencing identified two oxidoreductases, encoded by PP_0256 and PP_4596, transcriptionally active in the presence of formate. Quantitative physiology of deletion mutants revealed growth defects at high formate concentrations, pointing to an important role of these oxidoreductases in C1 tolerance. Moreover, we describe a concerted detoxification process for methanol and formaldehyde, the C1 intermediates upstream formate. Alcohol oxidation to highly-reactive formaldehyde by PedEH and other broad-substrate-range dehydrogenases underpinned the (apparent) suboptimal methanol tolerance of P. putida. Formaldehyde was mostly processed by a glutathione-dependent mechanism encoded in the frmAC operon, and thiol-independent FdhAB and AldB-II overtook detoxification at high aldehyde concentrations. Deletion strains were constructed and characterized towards unveiling these biochemical mechanisms, underscoring the worth of P. putida for emergent biotechnological applications-e.g. engineering synthetic formatotrophy and methylotrophy. IMPORTANCE C1 substrates continue to attract interest in biotechnology, as their use is both cost-effective and ultimately expected to mitigate the impact of greenhouse gas emissions. However, our current understanding of bacterial C1 metabolism remains relatively limited in species that cannot grow on (i.e., assimilate) these substrates. Pseudomonas putida, a model Gram-negative environmental bacterium, constitutes a prime example of this sort. The biochemical pathways active in response to methanol, formaldehyde, and formate have been largely overlooked-although the ability of P. putida to process C1 molecules has been previously alluded to in the literature. By using a systems-level strategy, this study bridges such knowledge gap through the identification and characterization of mechanisms underlying methanol, formaldehyde, and formate detoxification-including hitherto unknown enzymes that act on these substrates. The results reported herein both expand our understanding of microbial metabolism and lay a solid foundation for engineering efforts toward valorizing C1 feedstocks.

How to Build a Metalloenzyme: Lessons from a Protein-Based Model of Acetyl Coenzyme A Synthase

"What I cannot create, I do not understand"─Richard Feynman. This sentiment motivates the entire field of artificial metalloenzymes. Naturally occurring enzymes catalyze reactions with efficiencies, rates, and selectivity that generally cannot be achieved in synthetic systems. Many of these processes represent vital building blocks for a sustainable society, including CO2 conversion, nitrogen fixation, water oxidation, and liquid fuel synthesis. Our inability as chemists to fully reproduce the functionality of naturally occurring enzymes implicates yet-unknown contributors to reactivity. To identify these properties, it is necessary to consider all of the components of naturally occurring metalloenzymes, from the active site metal(s) to large-scale dynamics. In this Account, we describe the holistic development of a metalloprotein-based model that functionally reproduces the acetyl coenzyme A synthase (ACS) enzyme.ACS catalyzes the synthesis of a thioester, acetyl coenzyme A, from gaseous carbon monoxide, a methyl group donated by a cobalt corrinoid protein, and coenzyme A. The active site of ACS contains a bimetallic nickel site coupled to a [4Fe-4S] cluster. This reaction mimics Monsanto's acetic acid synthesis and represents an ancient process for incorporating inorganic carbon into cellular biomass through the primordial Wood-Ljungdahl metabolic pathway. From a sustainability standpoint, the reversible conversion of C1 substrates into an acetyl group and selective downstream transfer to a thiolate nucleophile offer opportunities to expand this reactivity to the anthropogenic synthesis of liquid fuels. However, substantial gaps in our understanding of the ACS catalytic mechanism coupled with the enzyme's oxygen sensitivity and general instability have limited these applications. It is our hope that development of an artificial metalloenzyme that carries out ACS-like reactions will advance our mechanistic understanding and enable synthesis of robust compounds with the capacity for similar reactivity.To construct this model, we first focused on the catalytic proximal nickel (NiP) site, which has a single metal center bound by three bridging cysteine residues in a "Y"-shaped arrangement. With an initial emphasis on reproducing the general structure of a low-coordinate metal binding site, the type I cupredoxin, azurin, was selected as the protein scaffold, and a nickel center was incorporated into the mononuclear site. Using numerous spectroscopic and computational techniques, including electron paramagnetic resonance (EPR) spectroscopy, nickel-substituted azurin was shown to have similar electronic and geometric structures to the NiP center in ACS. A substrate access channel was installed, and both carbon monoxide and a methyl group were shown to bind individually to the reduced NiI center. The elusive EPR-active S = 1/2 Ni-CH3 species, which has never been detected in native ACS, was observed in the azurin-based model, establishing the capacity of a biological NiI species to support two-electron organometallic reactions. Pulsed EPR studies on the S = 1/2 Ni-CH3 species in azurin suggested a noncanonical electronic structure with an inverted ligand field, which was proposed to prevent irreversible site degradation. This model azurin protein was ultimately shown to perform carbon-carbon and carbon-sulfur bond formation using sequential, ordered substrate addition for selective, stoichiometric thioester synthesis. X-ray spectroscopic methods were used to provide characterization of the remaining catalytic intermediates, resolving some debate over key mechanistic details.The overall approach and strategies that we employed for the successful construction of a functional protein-based model of ACS are described in this Account. We anticipate that these principles can be adapted across diverse metalloenzyme classes, providing essential mechanistic details and guiding the development of next-generation, functional artificial metalloenzymes.

Optimizing E. coli as a formatotrophic platform for bioproduction via the reductive glycine pathway.

Microbial C1 fixation has a vast potential to support a sustainable circular economy. Hence, several biotechnologically important microorganisms have been recently engineered for fixing C1 substrates. However, reports about C1-based bioproduction with these organisms are scarce. Here, we describe the optimization of a previously engineered formatotrophic Escherichia coli strain. Short-term adaptive laboratory evolution enhanced biomass yield and accelerated growth of formatotrophic E. coli to 3.3g-CDW/mol-formate and 6h doubling time, respectively. Genome sequence analysis revealed that manipulation of acetate metabolism is the reason for better growth performance, verified by subsequent reverse engineering of the parental E. coli strain. Moreover, the improved strain is capable of growing to an OD600 of 22 in bioreactor fed-batch experiments, highlighting its potential use for industrial bioprocesses. Finally, demonstrating the strain's potential to support a sustainable, formate-based bioeconomy, lactate production from formate was engineered. The optimized strain generated 1.2mM lactate -10% of the theoretical maximum- providing the first proof-of-concept application of the reductive glycine pathway for bioproduction.

Developing methylotrophic microbial platforms for a methanol-based bioindustry.

Methanol, a relatively cheap and renewable single-carbon feedstock, has gained considerable attention as a substrate for the bio-production of commodity chemicals. Conventionally produced from syngas, along with emerging possibilities of generation from methane and CO2, this C1 substrate can serve as a pool for sequestering greenhouse gases while supporting a sustainable bio-economy. Methylotrophic organisms, with the inherent ability to use methanol as the sole carbon and energy source, are competent candidates as platform organisms. Accordingly, methanol bioconversion pathways have been an attractive target for biotechnological and bioengineering interventions in developing microbial cell factories. This review summarizes the recent advances in methanol-based production of various bulk and value-added chemicals exploiting the native and synthetic methylotrophic organisms. Finally, the current challenges and prospects of streamlining these methylotrophic platforms are discussed.

A metabolic puzzle: Consumption of C1 compounds and thiosulfate in Hyphomicrobium denitrificans XT

Many obligately heterotrophic methylotrophs oxidize thiosulfate as an additional electron source during growth on C1 compounds. Although two different pathways of thiosulfate oxidation are implemented in Hyphomicrobium denitrificans XT, a pronounced negative effect on growth rate is observed when it is cultured in the simultaneous presence of methanol and thiosulfate. In this model organism, periplasmic thiosulfate dehydrogenase TsdA catalyzes formation of the dead-end product tetrathionate. By reverse genetics we verified the second pathway that also starts in the periplasm where SoxXA catalyzes the oxidative fusion of thiosulfate to SoxYZ, from which sulfate is released by SoxB. Sulfane sulfur is then further oxidized in the cytoplasm by the sulfur-oxidizing heterodisulfide reductase-like system (sHdr) which is produced constitutively in a strain lacking the transcriptional repressor sHdrR. When exposed to thiosulfate, the ΔshdrR strain exhibited a strongly reduced growth rate even without thiosulfate in the pre-cultures. When grown on methanol, cells exhibit significantly increased NAD+/NADH ratios in the presence of thiosulfate. In contrast, thiosulfate did not exert any negative effect on growth rate or increase NAD+ levels during growth on formate. On both C1 substrates, excretion of up to 0.5 mM sulfite as an intermediate of thiosulfate (2 mM) oxidation was recorded. Sulfite is known to form adducts with pyrroloquinoline quinone, the cofactor of periplasmic methanol dehydrogenase. We rationalize that this causes specific inhibition of methanol degradation in the presence of thiosulfate while formate metabolism in the cytoplasm remains unaffected.

Insights into C1 and C3 assimilation pathways in type I methanotrophic bacterium from co-production of 1,2-propanediol and lactate

Methanotrophic bacteria are attractive hosts for mining metabolic pathways of C1 assimilation to produce value-added products. Herein, the type I methanotroph Methylotuvimicrobium alcaliphilum 20Z was employed to explore the carbon flux from methane and methanol via the EMP pathway to produce 1,2-propanediol (1,2-PDO). The production of 1,2-PDO on methane was found to be mainly restricted by the lower carbon flux toward the EMP pathway. The co-utilization of C1 substrates and glycerol (C3) could contribute to enhance 1,2-PDO. Lactate was co-produced in much higher amounts than 1,2-PDO. This unexpected product was probably derived from lactaldehyde by inherent aldehyde dehydrogenases. The 1,2-PDO production without increased accumulation of lactate was observed via establishing the acetol–based pathway by propane utilization with the overexpression of pmoD. This is the first study to provide experimental insights into the operation of metabolic routes for 1,2-PDO and lactate co-production from C1 and C3 compounds in methanotrophs.

An Atom-Economic Enzymatic Cascade Catalysis for High-Throughput RAFT Synthesis of Ultrahigh Molecular Weight Polymers.

High-throughput synthesis of well-defined, ultrahigh molecular weight (UHMW) polymers by green approaches is highly desirable but remains unexplored. We report the creation of an atom-economic enzymatic cascade catalysis, consisting of formate oxidase (FOx) and horseradish peroxidase (HRP), that enables high-throughput reversible addition-fragmentation chain transfer (RAFT) synthesis of UHMW polymers at volumes down to 50 μL. FOx transforms formic acid, a C1 substrate, and oxygen to CO2 and H2 O2 , respectively. CO2 can escape from solution while H2 O2 is harnessed in situ by HRP to generate radicals from acetylacetone for RAFT polymerization, leaving no waste accumulation in solution. Oxygen-tolerant RAFT polymerization using enzymatic cascade redox cycles was successfully performed in vials and 96-well plates to produce libraries of well-defined UHMW polymers, and represents the first example of high-throughput synthesis method of such materials at extremely low volumes.

An Atom‐Economic Enzymatic Cascade Catalysis for High‐Throughput RAFT Synthesis of Ultrahigh Molecular Weight Polymers

AbstractHigh‐throughput synthesis of well‐defined, ultrahigh molecular weight (UHMW) polymers by green approaches is highly desirable but remains unexplored. We report the creation of an atom‐economic enzymatic cascade catalysis, consisting of formate oxidase (FOx) and horseradish peroxidase (HRP), that enables high‐throughput reversible addition‐fragmentation chain transfer (RAFT) synthesis of UHMW polymers at volumes down to 50 μL. FOx transforms formic acid, a C1substrate, and oxygen to CO2and H2O2, respectively. CO2can escape from solution while H2O2is harnessed in situ by HRP to generate radicals from acetylacetone for RAFT polymerization, leaving no waste accumulation in solution. Oxygen‐tolerant RAFT polymerization using enzymatic cascade redox cycles was successfully performed in vials and 96‐well plates to produce libraries of well‐defined UHMW polymers, and represents the first example of high‐throughput synthesis method of such materials at extremely low volumes.