Buccal Delivery System Research Articles

Design and in vitro Evaluation of Cocoa Butter-based Amlodipine Besylate Fast Melt Tablets

Background: Oral fast-melting tablets (FMTs) have been gaining popularity due to their advantages in resolving swallowing issues of conventional oral tablets. Cocoa butter is an excipient of choice to develop FMT with an acceptable taste and faster onset of action of the drug. Purpose: The present study aimed to prepare and characterize the amlodipine besylate-loaded cocoa butter FMTs. objective: To prepare and characterise the formulation of cocoa butter tablet as fast melt buccal delivery system of amlodipine besylate. Method: Amlodipine besylate FMTs were prepared using a simple freezing (refrigeration) method. Cocoa butter (Form V) was used as the base to achieve a final tablet weight of 500 mg with drug and other functional excipients. The designed prototype tablet formulations were subjected to disintegration tests to determine the robust selected batch. The formulation F4, containing 7% high-molecular-weight chitosan, exhibited the quickest disintegration time of 1.45 ± 0.10 min. Afterwards, the selected formulation, F4, was subjected to quality evaluation parameters. Results: Fourier transform infrared spectroscopy (FTIR) studies revealed that there was no incompatibility between amlodipine besylate, cocoa butter, and other excipients. The average hardness of the F4 formulation tablet batch was found to be 2.69 ± 0.21 kg/cm2 and a friability of less than 1%. The drug content in F4 tablets was found to be 102.38 ± 5.29% and showed an in-vitro drug release of 94.30 ± 2.63% within 30 min. Over a six-month stability testing period, the chosen F4 formulation did not significantly change in terms of tablet average weight, disintegration time, drug content, and in-vitro dissolution rate. Conclusions: Selected formulation F4 with 7% of high molecular weight chitosan exhibited good physical properties, indicating the suitability of cocoa butter as a base to produce FMTs with the aid of a natural super-disintegrant.

Development of a hydroxypropyl methyl cellulose/polyacrylic acid interpolymer complex formulated buccal mucosa adhesive film to facilitate the delivery of insulin for diabetes treatment

Buccal mucosa administration is a promising method for insulin (INS) delivery with good compliance. However, buccal mucosa delivery systems still face challenges of long-term mucosal adhesion, sustained drug release, and mucosal drug penetration. To address these issues, a double-layer film consisting of a hydroxypropyl methylcellulose/polyacrylic acid interpolymer complex (IPC)-formulated mucoadhesive layer and an ethylcellulose (EC)-formulated waterproof backing layer (IPC/EC film) was designed. Protamine (PTM) and INS were co-loaded in the mucoadhesive layer of the IPC/EC film (PTM-INS-IPC/EC film). In ex vivo studies with porcine buccal mucosa, this film exhibited robust adhesion, with an adhesion force of 120.2 ± 20.3 N/m2 and an adhesion duration of 491 ± 45 min. PTM has been shown to facilitate INS mucosal transfer. Pharmacokinetic studies indicated that the PTM-INS-IPC/EC film significantly improved the absorption of INS, exhibiting a 1.45 and 2.24-fold increase in the area under the concentration-time curve (AUC0-∞) compared to the INS-IPC/EC film and free INS, respectively. Moreover, the PTM-INS-IPC/EC film effectively stabilized the blood glucose levels of type 1 diabetes mellitus (T1DM) rats with post oral glucose administration, maintaining lower glucose levels for approximately 8 h. Hence, the PTM-INS-IPC/EC film provides a promising noninvasive INS delivery system for diabetes treatment.

Development and evaluation of sildenafil/glycyrrhizin-loaded nanofibers as a potential novel buccal delivery system for erectile dysfunction

Erectile dysfunction (ED) is a growing health condition that needs safe and effective therapy. One of the main common treatments is sildenafil which is used in clinics for managing erectile dysfunction by enhancing the blood supply to the penis. In the current study, sildenafil was formulated as nanofibers and mixed with the root extract of Glycyrrhiza glabra (glycyrrhizin) as a natural sweetener to be administrated in the buccal cavity for enhanced drug bioavailability, rapid drug absorption and improved patient compliance. The formulated dual-loaded nanofibers were evaluated by measuring diameter, disintegration, drug loading efficiency, drug release profile, and in vitro cell viability assessment. The results showed that the sildenafil/glycyrrhizin-loaded fibers had a diameter of 0.719 ± 0.177 μm and lacked any beads and pores formation on their surfaces. The drug loading and encapsulation efficiency for sildenafil were measured as 52 ± 7 µg/mg and 67 ± 9 %, respectively, while they were 290 ± 32 μg/mg and 94 ± 10 %, respectively, for glycyrrhizin. The release rate of sildenafil and glycyrrhizin demonstrated a burst release in the first minute, followed by a gradual increment until a complete release after 120 min. The in vitro cell viability evaluation exhibited that the application of sildenafil and glycyrrhizin is safe upon 24-hour treatment on human skin fibroblast cells at all used concentrations (i.e., ≤ 1,000 and 4,000 μg/mL, respectively). However, the application of sildenafil-glycyrrhizin combination (in a ratio of 1:4) demonstrated more than 80 % cell viability at concentrations of ≤ 250 and 1000 μg/mL, respectively, following 24-hour cell exposure. Therefore, sildenafil/glycyrrhizin dual-loaded PVP nanofibers showed a potential buccal therapeutic approach for erectile dysfunction management.

Design of nanoparticle-based systems for the systemic delivery of chemotherapeutics: Alternative potential routes via sublingual and buccal administration for systemic drug delivery.

Conventional therapeutic approaches for cancer generally involve chemo- and radiation therapies that often exhibit low efficacy and induce toxic side effects. Recent years have seen significant advancements in the use of protein biologics as a promising alternative treatment option. Nanotechnology-based systems have shown great potential in providing more specific and targeted cancer treatments, thus improving upon many of the limitations associated with current treatments. The unique properties of biomaterial carriers at the nanoscale have been proven to enhance both the performance of the incorporated therapeutic agent and tumor targeting; however, many of these systems are delivered intravenously, which can cause hazardous side effects. Buccal and sublingual delivery systems offer an alternative route for more efficient delivery of nanotechnologies and drug absorption into systemic circulation. This review concentrates on emerging buccal and sublingual nanoparticle delivery systems for chemo- and protein therapeutics, their development, efficacy, and potential areas of improvement in the field. Several factors contribute to the development of effective buccal or sublingual nanoparticle delivery systems, including targeting efficiency of the nanoparticulate carriers, drug release, and carrier biocompatibility. Furthermore, the potential utilization of buccal and sublingual multilayer films combined with nanoparticle chemotherapeutic systems is outlined as a future avenue for in vitro and in vivo research.

Buccal delivery system of active pharmaceutical ingredients-ionic liquid (API-IL): Effects of API-IL loading and gelatin film concentration

Ionic liquid (IL) salt of active pharmaceutical ingredient (API) represents a promising formulation strategy to address low drug solubility and polymorphism prevalent in API solid crystals. The present work developed for the first time a buccal delivery system of API-IL via fast-dissolving API-IL-loaded gelatin films. Imidazolium-based ibuprofen salt was used as the model API-IL. The effects of API-IL loading and gelatin concentration on the film’s (i) mechanical strength, (ii) inter-batch uniformity in the films’ API payload, weight, and thickness, (iii) thermal stability, (iv) API dissolution and solubility enhancement were investigated. The plasticizer role of API-IL was evident, where minimum 30 wt% API-IL loading was needed to produce flexible yet mechanically-strong films. Lower API-IL loading produced brittle films due to insufficient plasticization facilitated by hydrogen bond interactions between API-IL and gelatin. Gelatin concentration influenced films’ mechanical strength, weight/thickness, and API dissolution rate. Depending on the API-IL loading and gelatin concentration, films with API payload (7–30 mg/cm2), thickness (300–900 µm), and weight (20–110 mg/cm2) were produced at nearly 100% efficiency and high inter-batch uniformity. API-IL existed as amorphous liquid in the film exhibiting fast API dissolution (100% in 15 min) and high kinetic solubility (8 times thermodynamic solubility) in simulated saliva fluid.

Celebrating a Century of Insulin Discovery: A Critical Appraisal of the Emerging Alternative Insulin Delivery Systems.

Since the discovery of insulin, continuous developments of this peptide have led to better management of diabetes mellitus, thus leading to a decrease in diabetes-related mortality. Despite these developments, we have seen an increase in diabetes cases, which has further necessitated more innovative methods for diabetes management. The subcutaneous administration of insulin remains the mainstay therapy for type 1 diabetes mellitus. However, despite the availability of insulin analogues with improved pharmacokinetics, challenges with conventional administration exist. The challenges associated with insulin injections include hypoglycaemic episodes, needle phobia, and injection-site inflammation, which all have been reported to reduce patient compliance. Ongoing research on diabetes management strives to develop therapies that provide improved glycaemic control with minimal side effects. In part, for these reasons, we have seen an increase in the search and development of alternative insulin delivery systems that are envisaged to circumvent the shortfalls associated with the conventional administration route. Several alternative drug delivery systems, such as oral, pulmonary, buccal, nasal, and transdermal, have been explored in the last century. These efforts have not been without victory, as we have seen the emergence of pulmonary (Exubera and Afrezza) and buccal insulin delivery systems licenced for therapeutic use. Despite the success seen in these two systems, their marketability and popularity have been severely compromised due to reported safety concerns. Although oral insulin delivery has always shown promise in the past decades; however, it was only limited to preclinical trials. The main challenge associated with this delivery route is poor bioavailability, which necessitates high insulin concentration to be administered. Due to recent developments, oral insulin has reached phase 3 clinical trials. It is believed that patients would prefer oral insulin as their preference is often observed for oral antidiabetics over injected ones. In the last decade, transdermal insulin has also gained interest, where delivery of insulin with a concomitant reduction in blood glucose concentration has been demonstrated in vivo. However, at present, there are no clinical studies that have reported the efficacy of transdermal insulin administration. With technological advancement, there is a potential to develop yet another insulin delivery system that would likely enter the markets. As these novel delivery systems have been found to be effective, emerging competing products should be welcome and appreciated.

Bioadhesive Systems Targeting Site-Specific Mucosal Delivery

Abstract: One of the major limitations to drug delivery at mucosal administration sites is the limited retention of the dose at the tissue surface. Bioadhesive delivery systems increase the residence time/retention of the dosage form at the application site. To retain the drug at the site of administration for improved absorption and ease of administration, the identification of polymer systems based on site-specific physiological conditions is important. This review outlines diverse kinds of polymer systems and their mechanism of mucoadhesion. This review presents a brief description of bioadhesive strategies for the formulation and development of a buccal and esophageal delivery system based on its site-specific physiological considerations.

Deformable Nanovesicle-Loaded Gel for Buccal Insulin Delivery.

Deformable nanovesicles (DNVs) have been widely used in oral mucosal delivery studies of biomolecular drugs. However, their development for oral mucosal preparations has been limited by their physical and chemical instability, the need for small oral volumes, and the complexity of the oral microenvironment. This study aimed to develop a more suitable buccal delivery system for DNVs with improved storage stability. Preliminary stability studies investigated different gel types, the effects of different hydrophilic gel matrices, and matrix temperature sensitivity using DNVs loaded with insulin-phospholipid complex (IPC-DNVs). A temperature-sensitive gel encapsulating IPC-DNVs (IPC-DNV-TSG) prepared with 2% w/v gelatin was stable at 4 °C for three months and maintained an excellent hypoglycemic effect. The delivery efficiency of IPC-DNVs and IPC-DNV-TSG was compared using a TR146 cell model, revealing that cell viability remained high. Cellular uptake was slightly lower for IPC-DNV-TSG than for IPC-DNVs, but total transport did not differ significantly between the two groups, which may have been related to the viscosity of IPC-DNV-TSG and the hydrophilicity, cell adhesion properties, and biocompatibility of gelatin. Moreover, neither IPC-DNVs nor IPC-DNV-TSG induced significant mucosal irritation in rabbit tongue tissue sections. The study findings demonstrate a promising method for possible use as oral mucosal delivery of peptide drugs.

Spray-Dried Cytisine-Loaded Matrices: Development of Transbuccal Sustained-Release Tablets as a Promising Tool in Smoking Cessation Therapy.

Cytisine (CYT) has emerged as a promising molecule to treat nicotine addiction, since it acts as a partial agonist of nicotinic acetylcholine receptors. However, its unfavorable pharmacokinetic properties lead to multiple administrations per day, reducing the patient’s compliance and increasing the side effects. To overcome these drawbacks, CYT buccal administration is here proposed. Firstly, CYT stability in the buccal environment was assessed and its intrinsic ability to permeate/penetrate the tissue was determined by applying CYT solutions at increasing concentrations. Furthermore, a spray-drying method was selected and optimized as it is an eco-friendly, easily scalable and effective technique to obtain uniform and reproducible CYT-loaded (5% w/w) pharmaceutical powders, which were directly compressed, thus obtaining different buccal delivery systems (BDSs). The obtained BDSs were homogeneous and reproducible and embedded CYT in its amorphous form. The mechanism of CYT release was evaluated in vitro and found to be mainly driven by a Fickian diffusion phenomenon. Predominantly, the ex vivo permeation assays highlighted the ability of the BDSs to enhance CYT permeation, also producing high drug fluxes through the mucosa. Speculative mathematical evaluations based on the already-known CYT pharmacokinetic parameters showed that CYT-loaded BDSs could potentially be sufficient to obtain a therapeutic effect, thus making the reported formulations suitable candidates for further in vivo trials.

Hollow mesoporous silica nanoparticles-loaded ion-crosslinked bilayer films with excellent mechanical properties and high bioavailability for buccal delivery

Mucoadhesive buccal films (MBFs) become the most promising buccal mucosal delivery system duo to its advantageous properties, including simple preparation technique and better patient compliance. The mechanical properties and mucoadhesion of MBFs are crucial in their successful performance as well as manufacturing and administration. In this study, we prepared hollow mesoporous silica nanoparticles-loaded ion-crosslinked bilayer films (CCS-PVA-TPP-FSM@HMSNs) using carboxymethyl chitosan (CCS) and polyvinyl alcohol (PVA) for buccal delivery of furosemide (FSM). The FSM-loaded hollow mesoporous silica nanoparticles (FSM@HMSNs) were firstly characterized by SEM, TEM, and nitrogen adsorption/desorption. Then, we constructed an ion-crosslinked network using CCS and PVA employed with the solution casting method, and sodium tripolyphosphate (TPP) was used as a hydrogen bond crosslinking agent. The formulation was optimized through Box-Behnken design, where the impact of the proportion of the ingredients on the quality of the films was evaluated entirely. Herein, folding endurance, swelling, tensile strength, and adhesion force were selected as response variables. Morphology, mechanical, spectroscopic, thermal, and safety of CCS-PVA-TPP-FSM@HMSNs films were also investigated. The release and permeability behaviors of CCS-PVA-TPP-FSM@HMSNs films were evaluated by in vitro drug release, across isolated porcine buccal and TR146 cell model. The CCS-PVA-TPP-FSM@HMSNs films showed outstanding mechanical properties, suitable bioadhesion, high drug loading, significant sustained-release properties, and improved permeability. In pharmacokinetic study with golden hamster models, the relative bioavailability was increased by 191.54%, and the absolute bioavailability was 82.20%. In summary, this study provides evidence that this innovative CCS-PVA-TPP-FSM@HMSNs films could be a promising and industrialized buccal drug delivery system.

Exorbitant Drug Loading of Metformin and Sitagliptin in Mucoadhesive Buccal Tablet: In Vitro and In Vivo Characterization in Healthy Volunteers.

The aim of the proposed study is to develop a mucoadhesive buccal delivery system for the sustained delivery of metformin (MET) and sitagliptin (SIT) against diabetes mellitus (DM) with improved bioavailability. Polymeric blend of Carbopol® 940 (CP), agarose (AG) or polyvinylpyrrolidone K30 (PVP) as mucoadhesive agents in formulations (R1–R15) were compressed via the direct compression technique. Tablets were characterized for solid state studies, physicochemical and in vivo mucoadhesion studies in healthy volunteers. Outcomes did not reveal any unusual peak or interaction between the drugs and polymers in the physical mixture through Fourier Transform Infrared Spectroscopy (FTIR) and DSC analysis. The mucoadhesive blend of CP and PVP was superior compared to other blends. The formulation R4 revealed exorbitant loading of drugs with complete drug release for 6 h with ex vivo mucoadhesive strength and time of 26.99 g and 8.1 h, respectively. It was further scrutinized to evaluate it as an optimized formulation where it was found to be stable for up to 6 months. The formulation R4 depicted Korsmeyer–Peppas model and first-order mode of release correspondingly for SIT and MET. Moreover, it showed hemocompatibility, biocompatibility and stability with non-significant changes in the dissolution profile. Overall, the CP blend with PVP was found appropriate to yield the desired release coupled with the optimized mucoadhesive properties of the buccal tablets, ensuring sufficient pharmaceutical stability.

Topical Xerostomia Treatment with Hyaluronate Sheets Containing Pilocarpine.

Sjogren's syndrome and radiation therapy for head and neck cancers are often accompanied by xerostomia. Oral pilocarpine (PCP) to treat xerostomia produces systemic side effects, such as runny nose and lacrimation. To improve the therapeutic efficacy of PCP and reduce the aforementioned side effects, we developed a topical delivery system for PCP using freeze-dried sheets of hyaluronic acid (HA). The advantages of HA sheets over conventional oral formulations were examined through in vivo pharmacokinetic and pharmacodynamic studies after their application to oral tissues and salivary glands. The concentration of PCP in the submucosal tissue of the oral cavity was determined using the microdialysis (MD) method after buccal application of HA sheets containing PCP to hamsters. The concentration of PCP in the MD outflow was quite low after gastric administration, whereas the PCP concentration in plasma was high. In contrast, after buccal application of HA sheets containing PCP, the concentration of the drug in the MD outflow increased, despite the negligible concentration in plasma. These findings indicated that both enhancement of saliva secretion and the avoidance of systemic side effects could be achieved through buccal administration of PCP-loaded HA sheets. In addition, the pharmacodynamic study showed that when compared with intravenous and gastric administration, salivary application of HA sheets containing PCP resulted in similar volumes of saliva secretion and reduced lacrimal secretions. In conclusion, freeze-dried HA sheets allow for the development of a novel buccal delivery system with enhanced therapeutic efficacy and safety to treat xerostomia.

Fast-Dissolving Nifedipine and Atorvastatin Calcium Electrospun Nanofibers as a Potential Buccal Delivery System.

Geriatric patients are more likely to suffer from multiple chronic diseases that require using several drugs, which are commonly ingested. However, to enhance geriatric patients’ convenience, the electrospun nanofiber system was previously proven to be a successful alternative for the existing oral dosage forms, i.e., tablets and capsules. These nanofibers prepared either as single- or multi-layered fibers could hold at least one active compound in each layer. They might also be fabricated as ultra-disintegrated fibrous films for oral cavity administration, i.e., buccal or sublingual, to improve the bioavailability and intake of the administered drugs. Therefore, in this work, a combination of nifedipine and atorvastatin calcium, which are frequently prescribed for hypertension and hyperlipidemia patients, respectively, was prepared in a coaxial electrospinning system for buccal administration. Scanning electron microscopy image showed the successful preparation of smooth, non-beaded, and non-porous surfaces of the drug-loaded nanofibers with an average fiber diameter of 968 ± 198 nm. In contrast, transmission electron microscopy distinguished the inner and outer layers of those nanofibers. The disintegration of the drug-loaded nanofibers was ≤12 s, allowing the rapid release of nifedipine and atorvastatin calcium to 61% and 47%, respectively, after 10 min, while a complete drug release was achieved after 120 min. In vitro, a drug permeation study using Franz diffusion showed that the permeation of both drugs from the core–shell nanofibers was enhanced significantly (p < 0.05) compared to the drugs in a solution form. In conclusion, the development of drug-loaded nanofibers containing nifedipine and atorvastatin calcium can be a potential buccal delivery system.

Polymeric and electrospun patches for drug delivery through buccal route: Formulation and biointerface evaluation

IntroductionOf the various transmucosal routes which are being considered for extended and controlled drug delivery, buccal route is superior to other methods owing to high administrability and milder environment for drug absorption. In this direction, mucoadhesive buccal films of venlafaxine were fabricated using a combination of biocompatible polymers. AimThe main objective of the study was to standardize an optimized formulation of polyvinyl alcohol, sodium carboxymethyl cellulose and sodium alginate that would lead to sustained drug delivery in the form of buccal patches. MethodsVarying polymeric concentrations were utilized for the fabrication of buccal patches via solvent casting method. The physical parameters were evaluated, followed by in vitro drug release studies. The electrospun nanofibers were prepared for optimized formulations and the buccal delivery system was compared to oral and intravenous routes for absorption, distribution, and elimination during in vivo studies using venlaflaxine. ResultsThe patches had high tensile strength with uniform drug content and surface pH in the range of 6.28–6.88. The release of drug was steady witha maximum release of 89.97% at 5 h. The negative hemolytic and cytotoxicity studies with TR146 cells over a range of concentrations indicated biocompatibility of the mucoadhesive patch with human tissues. The pharmacokinetics of the buccal patch of the radiolabeled drug, 99mTc-venlaflaxine, displayed favorable release pattern. The radiolabeled patch attached to rabbit buccal mucosa displayed high retention with controlled drug release as indicated by the Cmax and T1/2 values (19.94 ng/ml and 3 h). The drug release mechanism corresponded to a pure fickian diffusion-controlled mechanism following Higuchi's model. Electrospun fibrous patch of the drug had a 10% higher drug release than solvent cast patch. ConclusionIn vitro and in vivo data indicate that the polymeric system was successfully optimized for sustained drug release for about 5 h in a continuous manner with electrospun fibrous patch showing 10% increase in drug release studies. The patches displayed ideal physical and biocompatibility characteristics. This polymeric combination can therefore be further utilized for development of novel drug delivery systems with sustained drug release pattern.

Development of mucoadhesive modified kappa-carrageenan/pectin patches for controlled delivery of drug in the buccal cavity.

In this study, modified kappa-carrageenan/pectin hydrogel patches were fabricated for treatment of buccal fungal infections. For this purpose, kappa-carrageenan-g-acrylic acid was modified with different thiolated agents (L-cysteine and 3-mercaptopropionic acid), and the thiol content of the resulting modified kappa-carrageenan was confirmed by elemental analyzer. Then, the hydrogel patches were fabricated, and characterized by Fourier-transform infrared spectroscopy, thermogravimetric analysis, ex vivo mucoadhesion test, and swelling behavior. Triamcinolone acetonide was added either directly or by encapsulating within the poly(lactic-co-glycolic acid) nanoparticles. The release amount of the drug from the directly loaded patch was 7.81 mg/g polymer, while it was 3.28 mg/g polymer for the encapsulated patch with the same content at 7 hr. The hydrogel patches had no cytotoxicity by cell culture studies. Finally, the drug loaded hydrogel patches were demonstrated antifungal activity against Aspergillus fumigatus and Aspergillus flavus. These results provide that the novel modified kappa-carrageenan and pectin based buccal delivery system has promising antifungal property, and could have advantages compared to conventional buccal delivery systems.

High-Payload Buccal Delivery System of Amorphous Curcumin-Chitosan Nanoparticle Complex in Hydroxypropyl Methylcellulose and Starch Films.

Oral delivery of curcumin (CUR) has limited effectiveness due to CUR’s poor systemic bioavailability caused by its first-pass metabolism and low solubility. Buccal delivery of CUR nanoparticles can address the poor bioavailability issue by virtue of avoidance of first-pass metabolism and solubility enhancement afforded by CUR nanoparticles. Buccal film delivery of drug nanoparticles, nevertheless, has been limited to low drug payload. Herein, we evaluated the feasibilities of three mucoadhesive polysaccharides, i.e., hydroxypropyl methylcellulose (HPMC), starch, and hydroxypropyl starch as buccal films of amorphous CUR–chitosan nanoplex at high CUR payload. Both HPMC and starch films could accommodate high CUR payload without adverse effects on the films’ characteristics. Starch films exhibited far superior CUR release profiles at high CUR payload as the faster disintegration time of starch films lowered the precipitation propensity of the highly supersaturated CUR concentration generated by the nanoplex. Compared to unmodified starch, hydroxypropyl starch films exhibited superior CUR release, with sustained release of nearly 100% of the CUR payload in 4 h. Hydroxypropyl starch films also exhibited good payload uniformity, minimal weight/thickness variations, high folding endurance, and good long-term storage stability. The present results established hydroxypropyl starch as the suitable mucoadhesive polysaccharide for high-payload buccal film applications.

Cytokine-Related Effect of Buccal-Delivered Collagen Peptide Incorporated in Mucoadhesive Films to Improve Female Skin Conditions

Recently, interest in collagen products has increased in the industries However, collagen products that are taken orally have the problem of being degraded by digestive enzymes. Therefore, a collagen peptide buccal delivery film (C-BDF) was developed to enhance the absorption without destruction and a clinical trial was conducted. A C-BDF was developed as a double layer and the permeation of collagen peptide (CP) through swine mucosa was investigated. This clinical study was performed on 43 healthy women, who were divided into either a control (n = 21) or test group (n = 22), over the course of 4 weeks. Skin assessments analyzed the hydration, elasticity, and roughness. In addition, the production of peroxynitrite and IL-1α in RAW 264.7 cells in supernatant media was conducted. A total of 1 kDa of CP in BDF showed significantly stronger permeation through swine mucosa compared to 3 kDa of CP in BDF. The C-BDF significantly enhanced skin hydration, elasticity, and roughness, and it removed wrinkles with no side effects after 2 weeks of intake. In addition, the production of peroxynitrite and IL-1α after the treatment with CP was significantly increased. Therefore, this study showed that collagen peptides could be completely absorbed into mucosa via a buccal delivery system and homeopathic effects might occur.

An Updated Overview of the Emerging Role of Patch and Film-Based Buccal Delivery Systems.

Buccal mucosal membrane offers an attractive drug-delivery route to enhance both systemic and local therapy. This review discusses the benefits and drawbacks of buccal drug delivery, anatomical and physiological aspects of oral mucosa, and various in vitro techniques frequently used for examining buccal drug-delivery systems. The role of mucoadhesive polymers, penetration enhancers, and enzyme inhibitors to circumvent the formulation challenges particularly due to salivary renovation cycle, masticatory effect, and limited absorption area are summarized. Biocompatible mucoadhesive films and patches are favored dosage forms for buccal administration because of flexibility, comfort, lightness, acceptability, capacity to withstand mechanical stress, and customized size. Preparation methods, scale-up process and manufacturing of buccal films are briefed. Ongoing and completed clinical trials of buccal film formulations designed for systemic delivery are tabulated. Polymeric or lipid nanocarriers incorporated in buccal film to resolve potential formulation and drug-delivery issues are reviewed. Vaccine-enabled buccal films have the potential ability to produce both antibodies mediated and cell mediated immunity. Advent of novel 3D printing technologies with built-in flexibility would allow multiple drug combinations as well as compartmentalization to separate incompatible drugs. Exploring new functional excipients with potential capacity for permeation enhancement of particularly large-molecular-weight hydrophilic drugs and unstable proteins, oligonucleotides are the need of the hour for rapid advancement in the exciting field of buccal drug delivery.

Formulation and Optimization of Sodium Alginate Polymer Film as a Buccal Mucoadhesive Drug Delivery System Containing Cetirizine Dihydrochloride.

Currently, pharmaceutical companies are working on innovative methods, processes and products. Oral mucoadhesive systems, such as tablets, gels, and polymer films, are among these possible products. Oral mucoadhesive systems possess many advantages, including the possibility to be applied in swallowing problems. The present study focused on formulating buccal mucoadhesive polymer films and investigating the physical and physical–chemical properties of films. Sodium alginate (SA) and hydroxypropyl methylcellulose (HPMC) were used as film-forming agents, glycerol (GLY) was added as a plasticizer, and cetirizine dihydrochloride (CTZ) was used as an active pharmaceutical ingredient (API). The polymer films were prepared at room temperature with the solvent casting method by mixed two-level and three-level factorial designs. The thickness, tensile strength (hardness), mucoadhesivity, surface free energy (SFE), FTIR, and Raman spectra, as well as the dissolution of the prepared films, were investigated. The investigations showed that GLY can reduce the mucoadhesivity of films, and CTZ can increase the tensile strength of films. The distribution of CTZ proved to be homogeneous in the films. The API could dissolve completely from all the films. We can conclude that polymer films with 1% and 3% GLY concentrations are appropriate to be formulated for application on the buccal mucosa as a drug delivery system.

Buccal Resveratrol Delivery System as a Potential New Concept for the Periodontitis Treatment.

The health benefits of resveratrol have been proven to inhibit the development of numerous diseases. A frequent limitation in its use is a low bioavailability stemming from a poor solubility and fast enterohepatic metabolism. Thus, the aim of the research was to investigate the possibility to formulate mucoadhesive cyclodextrin- and xanthan gum-based buccal tablets in order to increase the solubility of resveratrol and to eliminate bypass enterohepatic metabolism. Systems of resveratrol with α-cyclodextrin (α-CD), β-cyclodextrin (β-CD), γ-cyclodextrin (γ-CD) and 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) prepared by the dry mixing method (ratio 1:1) were selected for the of tablets where xanthan gum was used as a mucoadhesive agent. They were identified on the basis of PXRD, FT-IR analysis. Tablets F1 (with α-CD), F2 (with β-CD) and F3 (with γ-CD) were characterized by the highest compactibility as well as by favorable mucoadhesive properties. Resveratrol release from these tablets was delayed and controlled by diffusion. The tablets prepared in the course of this study appear to constitute promising resveratrol delivery systems and are recommended to increase the effectiveness of the treatment in many diseases, particularly periodontitis.