Broadband Superluminescent Diode Research Articles

Optimizing Optical Potentials With Physics-Inspired Learning Algorithms

We present our experimental and theoretical framework, which combines a broadband superluminescent diode with fast learning algorithms to provide speed and accuracy improvements for the optimization of on-dimensional optical dipole potentials, here generated with a digital micromirror device. To characterize the setup and potential speckle patterns arising from coherence, we compare the superluminescent diode to a single-mode laser by investigating interference properties. We employ machine-learning tools to train a physics-inspired model acting as a digital twin of the optical system predicting the behavior of the optical apparatus including all its imperfections. Implementing an iterative algorithm based on iterative learning control we optimize optical potentials an order of magnitude faster than heuristic optimization methods. We compare iterative model-based ``offline'' optimization and experimental feedback-based ``online'' optimization. Our methods provide a route to fast optimization of optical potentials, which is relevant for the dynamical manipulation of ultracold gases.

On the detection of nanoparticle cloud migration by a resonant photonic surface signal towards sedimentation velocity measurements

Migration and sedimentation of solid particles in a liquid are physical phenomena involving accumulation of soft matter or decantation of fragmented matter. A thorough understanding together with relevant measurements are prerequisites regarding many fields, including medicine, galenic pharmacology, food processing, and the cosmetics industry. In this paper, we investigate the feasibility of monitoring and detecting the migration of a nanoparticle cloud with a resonant light probe. For this purpose, hybrid silicon/silica/UV210 organic integrated photonic racetrack resonators were patterned by thin film processes to be used as sensors measuring the outcome of the impact of a cloud of nanoparticles, the dynamic migration plus sedimentation phenomenon of the nanoparticle cloud in water. A broadband superluminescent diode has been used for the excitation. Then, the spectral characteristics of the resonant guided modes have been analyzed, considering the observed changes while tracking the free spectral range of the transduced comb spectra as a function of time. The way to operate can be summarized as follows: Solutions based on spherical silica nanoparticles of fixed size are prepared and subjected to rheological measurements to obtain their respective viscosities. Next, a millimeter tank filled with water is conveniently placed on the active surface of the sensing chip, prior to the addition of one of the previously mentioned solutions. The series of spectra are acquired during the whole migration sequence and the transduced optical signal is then directly processed and treated by a specific code operated in real time by way of Lagrange interpolation polynomials. Collected data are then compared to a simple theoretical model describing the sedimentation of a spherical particle in water (Stokes' law). Eventually, the implementation of the device in a characterization platform and the development of a specific protocol allows a global treatment, whose description is followed by discussions on measurements and data. Consequently, after the impact of the drop containing the nanoparticles, the monitoring of a first phase regarding their fast cloud migration into the global study volume (with flow of matter plus vortex) eventually followed by their slow sedimentation, can be detected using such a resonant light probe. The overall duration of the first phase associated with sedimentation velocities is in the order of a few tens of µm/min for particles with submicron diameters (several hundreds of nanometers); a first attempt of comparison of this first phase with the results of the classic Stokes model would give a convergence of the values reaching between 9 and 19% for the sedimentation rates.

Bessel-Beam Interferometry for Turbidity With Refractive Index, Attenuation Coefficient, and Loss

This letter demonstrates a quasi-Bessel beam optical interferometry and fast Fourier transform (FFT) to estimate turbidity of liquid samples in terms of the refractive index (RI), optical attenuation coefficient, and loss. The device comprises a broadband superluminescent diode (SLD) source and a packaged deep-seated optical fiber negative axicon (DSNA) probe connected to the SLD source guiding light to the liquid sample trapped in between DSNA probe head and a glass slide. It generates a low-coherence interference spectrum as recorded in a spectrometer via an optical circulator. The FFT of the said spectrum gives power spectrum corresponding to the respective interfaces of the trapped sample. The power spectrum is used wisely to estimate turbidity in terms of RI, optical attenuation, and optical loss. The design is able to measure as low as 5 NTU (nephelometric turbidity units). This sensing platform may be useful in environmental protection, pharma, and processing industries.

Bessel beam with a micrometer-size central spot and interferometry for small volume bioliquid refractive index measurement.

This work demonstrates an interferometric technique to measure the refractive index (RI) of microliter volume of biosample solutions with the help of an optical fiber negative axicon and Bessel beam with the micrometer-size central spot. The RI measuring device consists of a broadband superluminescent diode (SLD) source along with an optical circulator and spectrometer. The axicon optical fiber probe packaged with a glass slide is connected to a broadband SLD source through an optical circulator, and a drop of microliter bioliquid sample is placed on the packaged probe's head. The reflected light from the glass-liquid interface couples back to the axicon probe and interferes with the reference beam generated at the air-glass interface of the axicon. The interference spectrum is further analyzed by applying the fast Fourier transform to calculate power from the respective interface and solve the Fresnel equation for the RI measurement. The RI of small sample volume ∼2µl of glucose solutions and bovine serum albumin protein solutions are reported as an application of the proposed method. This sensing platform shows promising applications in biomedicine for monitoring small volume various biosample concentrations. We also demonstrate RI measurement of flowing liquid sample using the developed setup in case the design can be considered for microfluidic channel research.

Compact in vivo handheld dual SWIR transillumination/reflectance imaging system for the detection of proximal and occlusal lesions.

We have developed a clinical probe capable of acquiring simultaneous short wavelength infrared (SWIR) cross-polarized reflectance and occlusal transillumination images of lesions on tooth proximal and occlusal surfaces. We hypothesize that the dual SWIR reflectance and transillumination probe will improve the diagnostic accuracy of the device by reducing false positives since it is unlikely that confounding structural features or specular reflection are going to be present in both reflectance and transillumination images. In addition, the dual probe will provide complementary diagnostic information about lesion severity to help discriminate early superficial lesions on tooth surfaces from deeply penetrating lesions. The dual probe was 3D printed and equipped with a compact InGaAs camera and broadband superluminescent diode light sources that emit broadband light at 1300 nm for occlusal transillumination and 1600 nm light for cross-polarization reflectance measurements. The first clinical images acquired using this novel probe are presented.

Dual short wavelength infrared transillumination/reflectance mode imaging for caries detection.

.Significance: We have developed a clinical probe capable of acquiring near-simultaneous short-wavelength infrared (SWIR) reflectance and occlusal transillumination images of lesions on tooth proximal and occlusal surfaces. We hypothesize that dual images will aid in differentiating between shallow and deep occlusal lesions and reduce the potential of false positives (FPs).Aim: The aim of this study was to test the performance of the dual reflectance and occlusal transillumination probe on extracted teeth prior to commencing clinical studies.Approach: The dual probe was 3D printed and the imaging system uses an InGaAs camera and broadband superluminescent diode light sources that emit broadband light at 1300 nm for occlusal transillumination and 1600-nm light for cross-polarization reflectance. The diagnostic performance of the dual probe was assessed using 120 extracted teeth with approximal and occlusal lesions. Reflectance and transillumination images were fused into single images to enhance the contrast between sound and lesion areas. The lesion contrast in both modes did not increase significantly with either the lesion depth or the distance from the occlusal surface for approximal lesions. In addition, the diagnostic performance of radiography, the individual reflectance and transillumination images, dual images, and fused images were compared using micro-computed tomography as the gold standard.Results: Reflectance imaging at 1600 nm yielded the highest diagnostic accuracy for lesions on both occlusal and proximal surfaces while radiography yielded the lowest number of FPs.Conclusion: This study demonstrates that simultaneous acquisition of both reflectance and transillumination SWIR images is possible with a single clinical device.

High-power single mode GaSb-based 2 μm superluminescent diode with double-pass gain

We report a broadband superluminescent diode operating around a 2 μm wavelength, optimized for high-power broadband operation. The high power operation is achieved by using a GaInSb/AlGaAsSb heterostructure positioned in a ridge waveguide with a J-shaped layout to form a double-pass geometry. To avoid lasing at high current while enabling high gain, a cavity suppression element is used. This combination allows demonstration of an output power as high as 120 mW for continuous-wave (CW) operation at room temperature, with a spectral full width at half maximum of about 43 nm. The maximum power spectral density was measured to be 1.8 mW/nm, which is about a fourfold increase compared to the state-of-the-art results for this wavelength range. To avoid heating, the diode was also driven with low duty-cycle current pulses; in this case, a peak power of more than 300 mW was achieved without any sign of roll-over (power was limited by the current injected). For CW operation, the central emission wavelength could be tuned by current injection between 1900 nm at 200 mA and 2027 nm at 2000 mA. Devices produce a Gaussian output beam that is suitable for coupling to single mode waveguides.

Development of a broadband superluminescent diode based on self-assembled InAs quantum dots and demonstration of high-axial-resolution optical coherence tomography imaging

We developed a near-infrared (NIR) superluminescent diode (SLD) based on self-assembled InAs quantum dots (QDs) and demonstrated high-axial-resolution optical coherence tomography (OCT) imaging using this QD-based SLD (QD-SLD). The QD-SLD utilized InAs QDs with controlled emission wavelengths as a NIR broadband light emitter, and a tilted waveguide with segmented electrodes was prepared for edge-emitting broadband electroluminescence (EL) spanning approximately 1–1.3 μm. The bandwidth of the EL spectrum was increased up to 144 nm at a temperature of 25 °C controlled using a thermoelectric cooler. The inverse Fourier transform of the EL spectrum predicted a minimum resolution of 3.6 μm in air. The QD-SLD was subsequently introduced into a spectral-domain (SD)-OCT setup, and SD-OCT imaging was performed for industrial and biological test samples. The OCT images obtained using the QD-SLD showed an axial resolution of ~4 μm, which was almost the same as that predicted from the spectrum. This axial resolution is less than the typical size of a single biological cell (~5 μm), and the practical demonstration of high-axial-resolution OCT imaging shows the application of QD-SLDs as a compact OCT light source, which enables the development of a portable OCT system.

Development of a Broadband Superluminescent Diode Based on Self-Assembled Quantum Dots for Optical Coherence Tomography Applications

Development of a Broadband Superluminescent Diode Based on Self-Assembled Quantum Dots for Optical Coherence Tomography Applications

Polarization properties of single layers in the posterior eyes of mice and rats investigated using high resolution polarization sensitive optical coherence tomography.

We present a high resolution polarization sensitive optical coherence tomography (PS-OCT) system for ocular imaging in rodents. The system operates at 840 nm and uses a broadband superluminescent diode providing an axial resolution of 5.1 µm in air. PS-OCT data was acquired at 83 kHz A-scan rate by two identical custom-made spectrometers for orthogonal polarization states. Pigmented (Brown Norway, Long Evans) and non-pigmented (Sprague Dawley) rats as well as pigmented mice (C57BL/6) were imaged. Melanin pigment related depolarization was analyzed in the retinal pigment epithelium (RPE) and choroid of these animals using the degree of polarization uniformity (DOPU). For all rat strains, significant differences between RPE and choroidal depolarization were observed. In contrast, DOPU characteristics of RPE and choroid were similar for C57BL/6 mice. Moreover, the depolarization within the same tissue type varied significantly between different rodent strains. Retinal nerve fiber layer thickness, phase retardation, and birefringence were mapped and quantitatively measured in Long Evans rats in vivo for the first time. In a circumpapillary annulus, retinal nerve fiber layer birefringence amounted to 0.16°/µm ± 0.02°/µm and 0.17°/µm ± 0.01°/µm for the left and right eyes, respectively.

Bimodal-sized quantum dots for broad spectral bandwidth emitter.

In this work, a high-power and broadband superluminescent diode (SLD) is achieved utilizing bimodal-sized quantum dots (QDs) as active materials. The device exhibits a 3 dB bandwidth of 178.8 nm with output power of 1.3 mW under continuous-wave (CW) conditions. Preliminary discussion attributes the spectra behavior of the device to carrier transfer between small dot ensemble and large dot ensemble. Our result provides a new possibility to further broadening the spectral bandwidth and improving the CW output power of QD-SLDs.

Experimental demonstration of binary shaped pupil mask coronagraphs for telescopes with obscured pupils

Abstract We present the fabrication and experimental demonstration of three free-standing binary shaped pupil mask coronagraphs, which are applicable for telescopes with partially obscured pupils. Three masks, designed to be complementary (labeled Mask-A, Mask-B, and Mask-C), were formed in 5 μm thick nickel. The design of Mask-A is based on a one-dimensional barcode mask. The design principle of Mask-B is similar, but has a smaller inner working angle and a lower contrast than Mask-A. Mask-C is based on a concentric ring mask and provides the widest dark region and a symmetric point spread function. Mask-A and Mask-C were both designed to produce a flexibly tailored dark region (i.e., non-uniform contrast). The contrast was evaluated using a light source comprising a broadband super-luminescent light-emitting diode with a center wavelength of 650 nm, and the measurements were carried out in a large vacuum chamber. Active wavefront control was not applied in this work. The coronagraphic images obtained by experiment were mostly consistent with the designs. The contrast of Mask-A within the ranges 3.3–8 λ/D and 8–12 λ/D was ∼ 10−4–10−7 and ∼ 10−7, respectively, where λ is the wavelength and D is the pupil diameter. The contrast of Mask-B was ∼ 10−4 and that of Mask-C over an extended field of view (5–25 λ/D) was ∼ 10−5–10−6. The effect of tilting the masks was investigated, and found to be irrelevant at the ∼ 10−7 contrast level. Therefore the masks can be tilted to avoid ghosting. These high-contrast free-standing masks have the potential to enable coronagraphic imaging over a wide wavelength range using both ground-based and space-borne general-purpose telescopes with pupil structures not specifically designed for coronagraphy.

Ultrahigh resolution spectral-domain optical coherence tomography at 1.3 μm using a broadband superluminescent diode light source

We present an ultrahigh resolution spectral-domain optical coherence tomography imaging system using a broadband superluminescent diode light source emitting at a center wavelength of 1.3μm. The light source consists of two spectrally shifted superluminescent diodes that are coupled together into a single mode fiber. The effective emission power spectrum has a full width at half maximum of 200nm and the source output power is 10mW. The imaging system has an axial resolution of 3.9μm in air (<3.0μm in biological tissue), and a lateral resolution of 6.5μm. The sensitivity and the maximum line rate are 95dB and 46kHz, respectively. Images of an infrared viewing card and a cornea from human eye suffering from glaucoma showing Schlemm's canal are presented to illustrate the performance of the system.

Broadband superluminescent diode–based ultrahigh resolution optical coherence tomography for ophthalmic imaging

Spectral domain optical coherence tomography (SD-OCT) with ultrahigh resolution can be used to measure precise structures in the context of ophthalmic imaging. We designed an ultrahigh resolution SD-OCT system based on broadband superluminescent diode (SLD) as the light source. An axial resolution of 2.2 μm in tissue, a scan depth of 1.48 mm, and a high sensitivity of 93 dB were achieved by the spectrometer designed. The ultrahigh-resolution SD-OCT system was employed to image the human cornea and retina with a cross-section image of 2048 × 2048 pixels. Our research demonstrated that ultrahigh -resolution SD-OCT can be achieved using broadband SLD in a simple way.

A high-performance quantum dot superluminescent diode with a two-section structure

Based on InAs/GaAs quantum dots [QDs], a high-power and broadband superluminescent diode [SLD] is achieved by monolithically integrating a conventional SLD with a semiconductor optical amplifier. The two-section QD-SLD device exhibits a high output power above 500 mW with a broad emission spectrum of 86 nm. By properly controlling the current injection in the two sections of the QD-SLD device, the output power of the SLD can be tuned over a wide range from 200 to 500 mW while preserving a broad emission spectrum based on the balance between the ground state emission and the first excited state emission of QDs. The gain process of the two-section QD-SLD with different pumping levels in the two sections is investigated.

Validation of Spectral Domain Optical Coherence Tomographic Doppler Shifts Using an In Vitro Flow Model

To validate velocity measurements produced by spectral domain optical coherence tomography (SD-OCT) in an in vitro laminar flow model. A 30-mL syringe filled with skim milk was inserted into a syringe pump. Intravenous (i.v.) tubing connected the syringe within the pump to a glass capillary tube (internal diameter, 0.579 mm) shallowly embedded in agarose gel, then to a collection reservoir. SD-OCT imaging was performed with an anterior segment eye scanner and optics engine coupled with a 100-nm bandwidth broadband superluminescent diode. Scan density of 128 x 128 A-scans was spread over a 4 x 4 mm area, and each A-scan was 2 mm in length. Fifteen sequential stationary A-scans were obtained at each 128 x 128 position, and Doppler shifts were calculated from temporal changes in phase. The beam-to-flow vector Doppler angle was determined from three-dimensional scans. In all reflectance and Doppler images, a clear laminar flow pattern was observed, with v(max) appearing in the center of the flow column. Phase wrapping was observed at all measured flow velocities, and fringe washout progressively shattered reflectance and phase signals beyond the Nyquist limit. The observed percentages of the velocity profile at or below Nyquist frequency was highly correlated with the predicted percentages (R(2)=0.934; P=0.007). SD-OCT provides objective Doppler measurements of laminar fluid flow in an in vitro flow system in a range up to the Nyquist limit.

Development of a variable spectral-width, wavelength-tunable light source using a superluminescent diode with optical feedback

We have constructed a variable spectral-width, wavelength-tunable light source using a non-fiber-coupled broadband superluminescent diode device with an optical feedback mechanism. As lasing occurs, a strong output light which is linearly polarized and monochromatic is obtained. The spectral width varies with the injection current and the optical feedback ratio. By incorporating a dispersing prism into the feedback branch, a wavelength-tunable, external-cavity-feedback laser source is achieved. The result is a convenient, inexpensive apparatus suitable for experiments in undergraduate optics courses.

Compact multimodal adaptive-optics spectral-domain optical coherence tomography instrument for retinal imaging

We have developed a compact, multimodal instrument for simultaneous acquisition of en face quasi-confocal fundus images and adaptive-optics (AO) spectral-domain optical coherence tomography (SDOCT) cross-sectional images. The optical system including all AO and SDOCT components occupies a 60x60 cm breadboard that can be readily transported for clinical applications. The AO component combines a Hartmann-Shack wavefront sensor and a microelectromechanical systems-based deformable mirror to sense and correct ocular aberrations at 15 Hz with a maximum stroke of 4 microm. A broadband superluminescent diode source provides 4 mum depth resolution for SDOCT imaging. In human volunteer testing, we observed up to an 8 dB increase in OCT signal and a corresponding lateral resolution of <10 microm as a result of AO correction.

Retinal Imaging by Spectral Optical Coherence Tomography

To demonstrate applicability of high speed spectral optical coherence tomography (SOCT) method for imaging retinal pathologies in clinical conditions. SOCT was performed in 67 eyes with different macular diseases. Examinations were carried out with the prototype SOCT instrument constructed in the Institute of Physics, Nicolaus Copernicus University, Toruń, Poland. A broadband superluminescent diode was used as a light source. The disturbances of retinal layer structure concerning mainly outer segments of photoreceptors were observed in case of central serous chorioretinopathy and choroidal neovascularization in age-related macular degeneration. Large drusen were often related to significant changes of outer nuclear layer thickness and reflectivity. SOCT detects small disturbances of the retinal structure and helps to precisely determine layers involved in different pathologies.

Wideband quantum-dash-in-well superluminescent diode at 1.6 /spl mu/m

We demonstrate broadband superluminescent diode at ~1.6-mum peak emission wavelength using InAs-InAlGaAs quantum-dash-in-well structure on InP substrate. The fabricated device exhibits the close-to-Gaussian emission with a bandwidth of up to 140 nm. The device produces a low spectrum ripple of 0.3dB and an integrated power of 1.7 mW with the corresponding bandwith of 110 nm measured at 20 degC under 8 kA/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup>