Broad pH Range Research Articles

Efficient degradation of methylene blue at near neutral pH based on heterogeneous Fenton-like system catalyzed by Fe2O3/MnO2

The contamination of aquatic environments by organic dye contaminants in industrial wastewater has attracted widespread global attention. The heterogeneous Fenton-like process presents an attractive method for degrading dye pollutants, especially when such reactions are conducted under neutral pH. In this study, Fe2O3/MnO2 composite was employed as a novel heterogeneous catalyst for activating hydrogen peroxide (H2O2) to oxidize and subsequently degrade methylene blue (MB) under neutral pH. Multiple characterization results have confirmed the presence of MnO2 and Fe2O3 as the primary phases of the synthesized compound catalyst. Degradation experiments have demonstrated that the degradation efficiency of MB approaches 100% under the conditions of H2O2 concentration of 0.30% and Fe2O3/MnO2 amount of 0.888 g/L. Furthermore, the Fe2O3/MnO2 catalyst exhibits consistent and outstanding catalytic activity within a broad pH range from 5 to 9 benefiting from the strong interface interaction in Fe2O3/MnO2. The investigation into the kinetics of the Fenton-like reaction indicates that the catalytic degradation of MB by Fe2O3/MnO2 in conjunction with H2O2 follows pseudo-first-order kinetics. Moreover, supplementary scavenging experiments have demonstrated the crucial role played by hydroxyl radicals (·OH) in the catalytic oxidation mechanism of MB. This study offers a promising catalyst for the treatment of dye-containing wastewater under neutral pH condition.

Genome-guided bioprospecting for industrially important enzymes from a thermophilic Bacillus subtilis strain SR-7, an isolate from hot spring of Madhya Pradesh, India

The study focused on isolating thermophilic bacteria from the hot springs of Madhya Pradesh, India, with the aim of identifying strains capable of producing industrially valuable enzymes. Among the 15 isolated strains, SR-7 identified as Bacillus subtilis exhibited significant enzyme activity, leading to its selection for further investigation. Genomic analysis revealed key characteristics of SR-7, including a 3,593,163 base pair chromosome with a GC content of 44.14 %. The genome was found to contain 55 tRNA genes, four rRNA clusters, and 3744 protein-coding genes. These genes encompass essential metabolic pathways and genes responsible for thermophilic adaptation, highlighting the potential for industrial applications. Further experimentation demonstrated SR-7 have the ability to produce various enzymes of industrial significance, such as amylase, lipase, cellulase, protease, lecithinase, gelatinase, and pectinase. Importantly, enzyme production was observed across a broad pH range (6.5 to 10) and temperature spectrum, indicating the versatility and adaptability of SR-7 to different environmental conditions. The findings suggest that SR-7 holds promise as a valuable resource for the pharmaceutical and industrial sectors. Its capacity to produce thermostable enzymes suitable for a range of applications underscores its potential contribution to biotechnological processes. By harnessing the enzymatic capabilities of thermophilic bacteria like SR-7, industries can pursue more sustainable and efficient production methods, reducing reliance on traditional chemical processes and enhancing overall productivity. Further research into the enzymatic properties and genetic mechanisms of SR-7 may unveil additional avenues for its utilization in various industrial processes.

New insights into the singlet oxygen-independent formation of TEMPO signals in electron paramagnetic resonance analysis

Electron paramagnetic resonance (EPR) is currently the most commonly used technique for measurement of singlet oxygen (1O2) in advanced oxidation processes. However, the characteristic EPR signal associated with 1O2 (2,2,6,6-tetramethylpiperidine-N-oxide radical, TEMPO) can be generated via alternative pathways not involving 1O2, leading to misinterpreted results. In this study, in-situ EPR analysis was used to re-examine the interaction between peroxymonosulfate (PMS), a common oxidant, and 2,2,6,6-tetramethyl-4-piperidinol (TEMP), the spin-trapping agent of 1O2. It was found that TEMPO could be generated in TEMP/PMS system over a broad pH range (3.0–11.0). The pathway for TEMPO formation was the direct oxidation of TEMP by PMS, and 1O2 was not involved. Furthermore, the intensity of TEMPO (ITEMPO) followed a reverse parabolic pattern as the [TEMP]/[PMS] ratios changed across all pH values. Kinetic analysis unveiled three distinct patterns (continuous linear increase; linear increase followed by a lower rate of increase; increase followed by reaching a plateau) in ITEMPO. Finally, an electron transfer mechanism was proposed for the conversion of TEMP to TEMPO by PMS. The results from this study are expected to advance the understanding of 1O2-independent formation of TEMPO in TEMP/PMS and to mitigate the interference during the detection of 1O2 by EPR.

High N2-selectivity of nitrite reduction by palladium-laden nanocomposite with self-sufficient electron donators

Selectively reducing nitrite to gaseous nitrogen (N2) with an effective and recyclable fashion stands as an attractive alternative for treating the relevant wastewater. Herein, a Pd-based nanocomposite (Pd@EDA-CMPS) was subtly assembled by encapsulating Pd(0) nanoparticles into a porous polystyrene carrier, which was aforehand functionalized with ethylenediamine (EDA) as the endogenous electron donator. Systematical macroscopic experiments confirm that the pre-grafted EDA groups can substantially stimulate the catalytic activity of the laden Pd(0) nanoparticles with high removal efficiency and N2 selectivity of Pd@EDA-CMPS toward nitrite; specifically, high N2 selectivity (86%) was achieved by Pd@EDA-CMPS with an excellent anti-interference ability against competing anion and a broad pH-range applicability (4–11), whereas no N2 production was detected for its counterparts (CMPS, EDA-CMPS, and Pd@CMPS). Spectroscopic analyses reveal that the grafted EDA groups played a decisive role in the formation of H-loaded Pd(0) nanoparticles inside the porous substrate, which joint with the unique pH-buffering ability of EDA drove the reaction to the production of nitrogen (N2) rather than ammonia (NH3). The exhausted Pd@EDA-CMPS can be promisingly regenerated by NaOH (eluting) and NaBH4 (restoring) solution without obvious loss in treatment capacity and N2 selectivity. This work provides a feasible strategy for catalytically reducing nitrite into N2 without the provision of exogenous reductor such as hydrogen.

Robust Luminescent Pyrene-Based Metal-Organic Framework Hydrogel as a pH-Responsive Fluorescence Emitter for Sensitive Immunoassay of Cardiac Troponin I.

Despite many luminescent advantages including outstanding absorption coefficient and high quantum yield, pyrene and its derivatives have been suffering from a dramatic aggregation-caused quenching (ACQ) effect. Although the dramatic ACQ effect of pyrene-based fluorophores has been restrained in pyrene-doped metal-organic frameworks (MOFs), the low loading of fluorescent (FL) units substantially impedes the improved luminescent behaviors. Herein, pyrene-based MOFs hydrogel was synthesized with a high loading of pyrene as the unique organic linker blocks instead of a dopant in MOFs. The gel matrix contributed to rigidifying the location of the FL emitters and achieving intensive FL emission and high luminescent stability and therefore efficiently overcoming the ACQ effect. Furthermore, the protonation of pyrene in the MOFs hydrogel remarkably decreased the luminescent intensity, which endowed the FL hydrogel with highly pH-responsive activity in the broad range (pH 4-10). Interestingly, glucose oxidase was immobilized into ZIF-8 as a highly efficient luminescent quencher, which contributed to catalyzing the form of gluconic acid and thus drastically quenching the FL signal of the MOFs hydrogel. Furthermore, the emitter-quencher pair of pyrene-based MOFs hydrogel and glucose oxidase was successfully employed to develop an ultrasensitive FL immunoassay platform for cardiac troponin I (as a model analyte). The limit of detection for cardiac troponin I was 5.2 pg/mL (3σ). The proof-of-principle study demonstrated the thrilling auxiliary effect of tailorable MOFs hydrogel on boosting the feasibility of aqueous insoluble FL chromophores for trace analysis.

Co-transport of citrate-modified biochar nanoparticles and released plant-available silicon in saturated porous media: Effect of LMWOAs and solution chemistry

Citrate-modified biochar nanoparticles (CBCNPs) represent a promising amendment with plant-available silicon (PASi) releasing capacity. However, the co-transport behavior with released PASi remain poorly understood. This study investigated their co-transport in saturated porous media under various solution chemistry and low molecular weight organic acids (LMWOAs). Experimental and two-site kinetic model results revealed that higher ionic strength caused favorable aggregation and size-selective, hindering CBCNPs transport. Divalent Ca2+ ions retained CBCNPs more effectively than K+ due to stronger charge screening and cation bridging. The pH buffering capacity of CBCNPs resulted in consistent transport behavior across a broad pH range (4–8). XDLVO calculation clarified the impact mechanisms of IS, ion types and pH on CBCNPs transport. Furthermore, LMWOAs exhibited a time-dependent blocking effect on CBCNPs transport. Oxalic acid (OA) and citric acid (CA) facilitated CBCNPs transport though mechanisms beyond XDLVO, including steric hindrance, competitive adsorption, and surface hydrophilicity. The presence of LMWOAs significantly hindered PASi co-transport, with the inhibitory effect ranked as acetic acid (AA) ≈ CA > OA > absence of organic acids. The inhibition is attributed to the blocking effect and formation of Si-organic acid complexes, as evidenced by breakthrough curves and density functional theory calculations. This study provides novel insights into the co-transport of CBCNPs with released PASi through mutual mechanisms, indicating both potential environmental benefits and risks.

WS2@FeBC assisted Fe(III)-activated percarbonate for roxarsone and tetracycline simultaneous removal: Interfacial fenton-like process enhanced by oxygen vacancies and tungsten redox

Sodium percarbonate (SPC) has garnered significant interest for its application in water decontamination via advanced oxidation processes (AOPs), however, SPC Fenton-like processes are always hindered by slow iron cyclic conversion and the production of ferric sludge, which limit their efficiency and practicality. Herein, a novel strategy was proposed to greatly improves the Fe(II)/Fe(III) cycling by utilizing oxygen vacancies (OV) in conjunction with W(IV)/W(VI) redox couples synergistically. In the optimized WS2@FeBC/Fe3+/SPC system, over 97 % removal efficiencies were achieved for both tetracycline (TC) and roxarsone (ROX) within just 10 min. Furthermore, the WS2@FeBC/Fe3+/SPC system exhibits robust performance across a broad pH range (3 to 11) and maintains high removal efficiencies above 90 % even after seven reuse cycles. Quenching experiments combined with electron paramagnetic resonance (EPR) and open-circuit potential measurements indicate that surface-adsorbed hydroxyl radicals (•OHads) and direct electron transfer are crucial for TC/ROX degradation. Density functional theory (DFT) calculations and X-ray photoelectron spectroscopy (XPS) analyses reveal that oxygen vacancies enhance H2O2 activation to produce •OHads, while sulfur vacancies accelerate the W(IV)/W(VI) redox process by mediating localized electron density around tungsten, thereby promoting the Fe(III)/Fe(II) cycling. This study provides a novel perspective on the surface interfacial reactions between reactive oxygen species (ROS) and organic pollutants, offering significant advancements in understanding and improving AOPs for water treatment.

Natural stabilizers for functional foods: The role of optimized date seed extracts in nanoemulsion applications

This study explores the potential of date seeds as natural stabilizers in nanoemulsion-based functional foods. Six pre-treatments (control, overnight stirring, high-speed homogenization, ultrasound, microwave, and pH-shift) were investigated to determine the best method for aqueous extraction of date seeds for nanoemulsion optimization and stability studies. The ultrasonic pre-treatment was found to enhance total polyphenols content and antioxidant activity and produce stable nanoemulsions with minimal size variation. A D-optimal design was used for nanoemulsion optimization using varying high-pressure homogenization (HPH) pressure, date seed powder (DSP) concentration, and oil content. The optimal nanoemulsion was formulated at 493.21 bar, with 15% DSP, and 4.13% oil. This nanoemulsion demonstrated stability over a week under refrigerated conditions, particularly at pH 6 and with NaCl concentrations below 100 mM. Our findings indicate that date seed extract can be an effective natural ingredient to stabilize nanoemulsions, promoting the development of novel functional foods. Future studies on enhancing the functional attributes and understanding the properties of the nanoemulsions, including sensory and rheological characteristics and long-term stability across a broader pH range and salt concentrations, would broaden the potential of date seeds as natural stabilizers in nanoemulsion-based functional foods.

Lanthanum-loaded polyacrylonitrile fiber as an efficient phosphate adsorbent

Lanthanum (La) emerged as a promising candidate for phosphate removal due to its inherent high affinity towards phosphates. However, addressing issues related to lanthanum aggregation often required loading lanthanum onto suitable carriers. While composite La with nanomaterials showed effective enhancement in adsorption performance, their practical environmental applicability remained limited. In this study, lanthanum was immobilized onto polyacrylonitrile (PAN) fibers modified with triethylenetetramine. The resulting lanthanum-loaded polyacrylonitrile (La@PAN) fibers exhibited a remarkable maximum phosphate adsorption capacity of 83.33 mg P g−1, significantly higher than most previously reported fiber-based adsorbents. Moreover, these fibers achieved adsorption equilibrium within 20 min and demonstrated excellent adsorption capabilities within a broad pH range of 3–6. Even after five regeneration cycles using NaCl solution, the adsorption capacity retained 82.51 % of its initial value, indicating excellent environmental applicability. Importantly, these fiber adsorbents possessed unique flexibility and weavability, allowing them to be tailored into different shapes according to dynamic application demands, thus offering customized solutions for specific environmental challenges.

Efficient degradation of bisphenol A and amino black 10B by magnetic composite Fe3O4@MOF-74 as catalyst

Metal-organic frameworks (MOFs) exhibit high chemical stability and porosity, and have been widely applied in various fields including selective adsorption and separation, sensors, and catalysis. When combined with Fe3O4, they effectively address issues such as aggregation of Fe3O4 particles and the difficulty in recovering MOFs as catalysts. Therefore, in this study, we used a simple solvothermal method as a catalyst to synthesize a high specific surface area magnetic composite Fe3O4@MOF-74, which was used to catalyze the degradation of bisphenol A (BPA) and amino black 10B in wastewater. We activated Na2S2O8 to generate radicals for oxidizing and degrading BPA and amino black 10B. Experimental results showed that at 35 °C, with Fe3O4@MOF-74 (Fe3O4: MOF-74=1:1) concentration of 0.2 g/L and Na2S2O8 concentration of 2 g/L, the catalytic effect is efficient and economical. Meanwhile, removal rates of BPA and amino black 10B exceeded 95.58 % over a broad pH range (pH 3–9). Furthermore, even after multiple cycles of use, Fe3O4@MOF-74 maintained catalytic degradation rates of BPA and amino black 10B above 93.24 % and 95.01 %, respectively. Additionally, in water samples, removal rates of BPA and amino black 10B exceeded 91.55 %. This study provides a new and efficient catalyst material for wastewater treatment, which is expected to play an important role in environmental remediation.

Gene cloning, IPTG-independent auto-induction and characterization of a novel hyperstable S9 prolyl oligopeptidase having lipolytic activity from Thermotoga naphthophila RKU-10T with applications

A hyperstable lipase from Thermotoga naphthophila (TnLip) was cloned and overexpressed as a soluble and active monomeric protein in an effectual mesophilic host system. Sequence study revealed that TnLip is a peptidase S9 prolyl oligopeptidase domain (acetyl esterase/lipase-like protein), belongs to alpha/beta (α/β)-hydrolase superfamily containing a well-conserved α/β-hydrolase fold and penta-peptide (GLSAG) motif. Various cultivation and induction strategies were applied to improve the heterologous expression and bacterial biomass, but TnLip intracellular activity was enhanced by 14.25- fold with IPTG-independent auto-induction approach after 16 h (26 °C, 150 rev min−1) incubation. Purified TnLip (35 kDa) showed peak activity at 85 °C in McIlvaine buffer (pH 7.0–8.0), and has great stability over a broad range of pH (5.0–10.0), and temperature (40–85 °C) for 8 h. TnLip exhibited prodigious resistance toward various commercial detergents, chemical additives, and salt. TnLip activity was improved by 170.51 %, 130.67 %, 127.42 %, 126.54 %, 126.61 %, 120.32 %, and 116.31 % with 50 % (v/v) of methanol, ethanol, n-butanol, isopropanol, acetone, glycerol, and acetic acid, respectively. Moreover, with 3.0 M of NaCl, and 10 mM of Ca2+, Mn2+, and Mg2+ TnLip activity was augmented by 210 %, 185.64 %, 152.03 %, and 116.26 %, respectively. TnLip has an affinity with various substrates (p-nitrophenyl ester and natural oils) but maximal hydrolytic activity was perceived with p-nitrophenyl palmitate (pNPP, 3600 U mg−1) and olive oil (1182.05 U mg−1). The values of Km (0.576 mM), Vmax (4216 μmol mg−1 min−1), VmaxKm−1 (7319.44 min−1), kcat (1106.74 s−1), and kcatKm−1 (1921.42 mM−1 s−1) were calculated using pNPP substrate. Additionally, TnLip degraded animals' fats and removed oil stains within 3 h and 5 min, respectively. All these features make halo-alkali-thermophilic TnLip as an auspicious contender for laundry detergents (cleaning bio-additive), fat degradation, wastewater treatment and endorse eco-friendly stewardship along with various other biotechnological applications.

Regulating the dominant reactive oxygen species from Fe(IV)-oxo to 1O2 by deprotonation of Fe(IV)-oxo in electro-Fe(II)/periodate system

The ferrous species (Fe(II))-periodate (PI) system employs efficient decontamination by generating ferryl species (Fe(IV)-oxo) under acidic pH conditions. However, the mechanisms by which the Fe(II)/PI system operates across a broad pH range remain elusive. In light of the rapid oxidation and consumption of Fe(II) at neutral pH, we developed an electro-Fe(II) system utilizing an iron plate anode to activate PI (E(Fe/C)/PI). Efficient sulfamethoxazole (SMX) degradation was achieved under the E(Fe/C)/PI system across a range of pH values. Quenching and chemical probe experiments revealed a transition from Fe(IV)-oxo to singlet oxygen (1O2) as the predominant reactive species from acidic to near-neutral pH, respectively. Density functional theory (DFT) calculations indicated that the differences in one-electron transfer capacity and hydrolysis pathways for various protonated Fe(IV)-oxo species underlie the variations in catalytic mechanisms. This study not only enhances the efficiency of the Fe(II)/PI system but also provides a comprehensive understanding of the activation mechanisms at different pH levels.

Cloning, expression and characterisation of a novel mollusc α-1,2-Fucosyltransferase from Crassostrea gigas (CgFUT2)

Glycans containing fucose play crucial roles in cell biology, particularly in recognition processes. In humans, fucose found in H-blood group antigens is recognized by various pathogens, thereby influencing host-pathogen interactions. However, in invertebrate biology the specific functions of these modifications and the corresponding glycosyltransferases are not fully elucidated. Therefore, cloning these glycosyltransferases from different model systems will provide valuable insights into this process. Little is known about fucosyltransferases in molluscs. For this study, a sequence of the Pacific oyster, Crassostrea gigas, based on amino acid sequence homologies with rabbit and human α-1,2-fucosyltransferases, was chosen. The recombinant enzyme (350 amino acids) was able to transfer fucose from GDP-fucose to the galactose residue of type II disaccharides, terminal galactoses in complex N-glycan structures and several linear and branched galactans which were tested using a glycan microarray. The α-1,2-linkage formed was confirmed by NMR analysis. The enzyme was active in a broad pH-range, it was relatively stable upon storage conditions and its activity was not dependent on the presence of divalent cations. In this study, we were able to clone, express and characterise a novel α-1,2-fucosyltrasferase from Crassostrea gigas (CgFUT2).

Pb2+ and Cd2+ ion adsorption capability of a novel hydrotalcite-like absorbent FeMnNi-LTH in water

This paper discusses the application of a layered triple hydroxide (FeMnNi-LTH) in removing Pb2+ and Cd2+ ions from aqueous solutions. The material was synthesized via co-precipitation, adhering to a molar ratio of 1:1:2 (Fe:Mn:Ni). It was characterized using FTIR, XRD, SEM and TEM. The results indicate that the synthesized material is classified as a hydrotalcite and exhibits a well-defined layered structure. Batch experiments were conducted to investigate the adsorption of Pb2+ and Cd2+ by FeMnNi-LTH, taking into account various factors such as coexisting ions, pH, temperature, adsorbent dosage, and contact time. The experimental results showed that the adsorption capacity of this material for Pb2+ and Cd2+ was 253.89 mg/g and 56.90 mg/g at 25 °C, respectively. Moreover, it exhibits a consistent high adsorption capacity across a broad pH range (pH 3–5.5). When cations coexist, they compete for adsorption sites in the following order: Zn2+ > Ca2+ > Mg2+ > Cd2+/Pb2+. Based on the calculated thermodynamic parameters, it is inferred that the adsorption process is endothermic and spontaneous. The adsorption mechanism, as analyzed by modeling and characterization, involves isomorphic substitution, surface complexation, precipitation, electrostatic attraction, and physical adsorption. The quantitative analysis of the adsorption mechanism revealed that FeMnNi-LTH primarily adsorbs Pb2+ and Cd2+ via precipitation and surface complexation. It was revealed by comparison with other adsorbents that the synthesized FeMnNi-LTH can be used for remediation of heavy metal pollution in water.

Activation of H2O2 using a single-atom Cu catalyst for efficient tetracycline degradation

The abuse of antibiotics has caused serious harm to the ecological environment and human health. Fenton-like advanced oxidation technology is a green and effective treatment means, but how to improve the Fenton reaction efficiency and wide pH adaptability is still a big challenge. Herein, we designed and developed a single-atom catalyst Cu1-CN with graphite-phase carbon nitride as the carrier by loading a low amount of metal Cu. The N atom anchors the copper atom in the form of a coordination bond, and the single atom Cu site has excellent performance in activating H2O2. Not only a short period of time (10 min) oxidation degradation of tetracycline (degradation rate 80 %), and in a broad range of pH (3.2 ∼ 9.5) still maintaining high removal performance (efficiency more than 70 %). Combined with X-ray absorption fine structure characterization and density functional theory (DFT) calculations, it is considered that isolated Cu atom and N atom cooperate to construct highly reactive Cu-N4 active centre, which completes the task of H2O2 activation. This study provides a new theoretical basis and technical support for the degradation of antibiotic pollutants by single-atom Fenton-like reaction.

Constructing heterointerfaces to enhance electron transfer of CoFe/CoFe2O4 mediated electro-Fenton process for bisphenol A degradation: Mechanistic insights and performance evaluation

The inefficient electron transfer and Fe(III)/Fe(II) cycle remain significant obstacles in the electro-fenton process. Herein, a nitrogen-doped graphite felt (NGF)-supported CoFe/CoFe2O4 heterostructure is synthesized that achieves highly efficient interfacial electron transfer and stable Co/Fe redox cycle. Theoretical calculations demonstrate that the CoFe/CoFe2O4 heterointerfaces induce local charge redistribution benefiting from the electronic communication between electron acceptor (CoFe2O4) and electron donor (CoFe). Analysis of the Fermi level indicates that the introduction of CoFe alloy enhances the electron density of the catalyst. The CoFe/CoFe2O4@NGF cathode can remove bisphenol A (BPA) completely in 90 min, and the pseudo-first-order kinetic constant (0.0625 min−1) is 23 times higher than the GF system. Notably, the CoFe/CoFe2O4@NGF electrode maintains excellent catalytic capability and stability within a broad pH range (3–11). The construction of the CoFe/CoFe2O4 heterostructure reduces the adsorption energy of oxygen, which ultimately increases the yield of reactive oxygen species (ROS). Quenching experiments revealed that hydroxyl radical (·OH) played a dominant role in the degradation of BPA, and significantly reduced the biotoxicity of intermediate products. This work offers a dependable approach for developing bimetallic catalysts with high catalytic activity.

Bifunctional magnetic carbon dots for the rapid fluorescent detection and the efficient adsorptive removal of copper ion

Developing a bifunctional material capable of both sensing and removing heavy metal ions is crucial but remains a significant challenge. Herein, magnetic carbon dots (M/CDs) were developed using ferroferric oxide (Fe3O4) and riboflavin (C17H20N4O6). M/CDs with optimal fluorescence properties were obtained under the specific preparation conditions of a molar ratio of riboflavin / Fe3O4 of 6:5, at a temperature of 200 °C and following a reaction time of 24 h. The structure of M/CDs was characterized using TEM, XRD, FTIR and VSM, which exhibited the prepared M/CDs contained high-affinity groups (–CN, C=O) and excellent magnetic separation properties (83.87 emu/g), offering selective detection and higher separation capacity for copper ion (Cu2+). The fluorescence intensity of the M/CDs progressively decreased with increasing concentrations of Cu2+, and the calculated detection limit was determined to be 0.096 mg/L, which was below the permissible limit. Moreover, the M/CDs demonstrated a removal efficiency of 89 % for 5 mg/L of Cu2+ across a broad pH range. The adsorption data were well described by the pseudo-second-order kinetic and Freundlich isotherm models. Notably, the reusability could be achieved by recycling at least five turns by using an external magnet. All of these indicate magnetic carbon dots hold great promise for simultaneous detection and removal of Cu2+, offering a feasible solution for assessing water quality and treating wastewater.

Boosted photo-Fenton-like process for selective degradation of emerging contaminants by dehydrated Fe-based metal–organic framework with thermodynamically-favorable center metal electron density and confinement effect

The Heterogeneous Fenton reaction has long stood out as a highly effective technology for water purification. However, it is nowadays facing challenges such as low selectivity, sluggish Fe(III) reduction, and limited H2O2 conversion efficiency. Herein, dehydrated MIL-100(Fe)-250 was synthesized through thermal treatment, demonstrating superior efficiency in removing emerging contaminants, with a three-fold efficiency higher than undehydrated sample. The dehydrated MIL-100(Fe)-250 exhibited selective acceleration in the removal of quinolones and phenolic organics, rendering the system resistant to interference from coexisting matter. Through in-situ diffuse reflectance infrared Fourier-transform spectroscopy and density functional theory calculation, it was manifested that dehydration process regulates the steric hindrance and local electron density of Fe ions. This adjustment enhances charge transfer, thereby facilitating Fe(III) reduction and promoting the H2O2 activation and conversion efficiency. Moreover, the quasi-steady-state concentrations of hydroxyl radical in MIL-100(Fe)-250 were found to be 2.2 times higher than that those in undehydrated sample. Impressively, the dehydrated MIL-100(Fe)-250 displayed adaptability across a broad pH range of 5.0–9.0. The present study underscores the significant potential of porous MIL-100(Fe)-250 with spatial confinement, which imparts a clear size exclusion effect. As a result, this catalyst emerges as a promising candidate for eliminating contaminants in real water matrices, offering a viable strategy for water pollution control.

Pre-exposure to peracetic acid followed by UV treatment for deactivating vancomycin-resistant Enterococcus faecalis through intracellular attack

Antimicrobial resistance (AMR) poses a global health threat to aquatic environments and its propagation is a hot topic. Therefore, deactivating antibiotic-resistant bacteria (ARB) and removing antibiotic resistance genes (ARGs) from water is crucial for controlling AMR transmission. Peracetic acid (PAA), which is known for its potent oxidizing properties and limited by-product formation, is emerging as a favorable disinfectant for water treatment. In this study, we aimed to assess the efficacy of pre-exposure to PAA followed by UV treatment (PAA-UV/PAA) compared with the simultaneous application of UV and PAA (UV/PAA). The focus was on deactivating vancomycin-resistant Enterococcus faecalis (VREfs), a typical ARB in water. Pre-exposure to PAA significantly enhanced the efficacy of subsequent UV/PAA treatment. At a UV fluence of 7.2 mJ cm−2, the PAA-UV/PAA method achieved a 6.21 log reduction in VREfs, surpassing the 1.29 log reduction observed with UV/PAA. Moreover, compared to UV/PAA, PAA-UV/PAA showed increased efficacy with longer pre-exposure times and higher PAA concentrations, maintaining superior performance across a broad pH range and in the presence of humic acid. Flow cytometry analysis indicated minimal cellular membrane damage using both methods. However, the assessments of superoxide dismutase (SOD) activity and adenosine triphosphate content revealed that PAA-UV/PAA induced greater oxidative stress under similar UV irradiation conditions, leading to slower bacterial regrowth. Specifically, SOD activity in PAA-UV/PAA surged to 3.06 times its baseline, exceeding the 1.73-fold increase under UV/PAA conditions. Additionally, pre-exposure to PAA amplified ARGs degradation and reduced resistance gene leakage, effectively mitigating the spread of AMR. Pre-exposure to 200 μM PAA for 10 and 20 min enhanced vanB gene removal efficiency by 0.14 log and 1.29 log, respectively. Our study provides a feasible approach for optimizing UV/PAA disinfection for efficient removal of ARB and ARGs.

Eco-conscious potentiometric sensing: a multiwalled carbon nanotube-based platform for tulathromycin monitoring in livestock products

Tulathromycin (TUL) is a widely used veterinary antibiotic for treating bovine and porcine respiratory infections. Consuming animal-derived food contaminated with this medication may jeopardize human health. This work adopted the first portable potentiometric platform for direct TUL sensing in pharmaceutical and food products. The sensor employed a plasticized PVC membrane on a glassy carbon electrode doped with calix[6]arene and multi-walled carbon nanotubes (MWCNT) in a single solid contact layer for selective binding and signal stability. Characterization via scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) confirmed the material’s integrity. The MWCNT-based sensor produced a stable Nernstian response (1.0 × 10−7 to 1.0 × 10−3 M) and a limit of detection (LOD) of 9.76 × 10–8 M with instantaneous response (8 ± 2 s). IUPAC validation revealed high selectivity for TUL against interfering ions, minimal drift (0.6 mV/h), and functionality over a broad pH range (2.0–7.0), allowing direct application to dosage form, spiked milk, and liver samples. Eco-Scale, AGREE, and Whiteness assessment proved the method's ecological sustainability, economic viability, and practical feasibility, surpassing traditional approaches.Graphical