Brightness Electron Beams Research Articles

Generation of ultrahigh-brightness pre-bunched beams from a plasma cathode for X-ray free-electron lasers

The longitudinal coherence of X-ray free-electron lasers (XFELs) in the self-amplified spontaneous emission regime could be substantially improved if the high brightness electron beam could be pre-bunched on the radiated wavelength-scale. Here, we show that it is indeed possible to realize such current modulated electron beam at angstrom scale by exciting a nonlinear wake across a periodically modulated plasma-density downramp/plasma cathode. The density modulation turns on and off the injection of electrons in the wake while downramp provides a unique longitudinal mapping between the electrons’ initial injection positions and their final trapped positions inside the wake. The combined use of a downramp and periodic modulation of micrometers is shown to be able to produces a train of high peak current (17 kA) electron bunches with a modulation wavelength of 10’s of angstroms - orders of magnitude shorter than the plasma density modulation. The peak brightness of the nano-bunched beam can be O(1021A/m2/rad2) orders of magnitude higher than current XFEL beams. Such prebunched, high brightness electron beams hold the promise for compact and lower cost XEFLs that can produce nanometer radiation with hundreds of GW power in a 10s of centimeter long undulator.

High field hybrid photoinjector electron source for advanced light source applications

The production of high spectral brilliance radiation from electron beam sources depends critically on the electron beam qualities. One must obtain very high electron beam brightness, implying simultaneous high peak current and low emittance. These attributes are enabled through the use of very high field acceleration in a radio-frequency (rf) photoinjector source. Despite the high fields currently utilized, there is a limit on the achievable peak current in high brightness operation, in the range of tens of Ampere. This limitation can be overcome by the use of a hybrid standing wave/traveling wave structure; the standing wave portion provides acceleration at a high field from the photocathode, while the traveling wave part yields strong velocity bunching. This approach is explored here in a C-band scenario, at field strengths ($>100\text{ }\text{ }\mathrm{MV}/\mathrm{m}$) at the current state-of-the-art. It is found that one may arrive at an electron beam with many hundreds of Amperes with well-sub-micron normalized emittance. This extremely compact injector system also possesses attractive simplification of the rf distribution system by eliminating the need for an rf circulator. We explore the use of this device in a compact 400 MeV-class source, driving both inverse Compton scattering and free-electron laser radiation sources with unique, attractive properties.

Photoemission characterization of N-polar III-nitride photocathodes as candidate bright electron beam sources for accelerator applications

We report on the growth and characterization of a new class of photocathode structures for use as electron sources to produce high brightness electron beams for accelerator applications. The sources are realized using III-nitride materials and are designed to leverage the strong polarization field, which is characteristic of this class of materials when grown in their wurtzite crystal structure, to produce a negative electron affinity condition without the use of Cs, possibly allowing these materials to be operated in radio frequency guns. A Quantum Efficiency (QE) of about 1×10−3 and an emitted electrons’ Mean Transverse Energy (MTE) of about 100 meV are measured at a wavelength of 265 nm. In a vacuum level of 3×10−10 Torr, the QE does not decrease after more than 24 h of continuous operation. The lowest MTE of about 50 meV is measured at 300 nm along with a QE of 1.5×10−5. Surface characterizations reveal a possible contribution to the MTE from surface morphology, calling for more detailed studies.

Single-Crystal Alkali Antimonide Photocathodes: High Efficiency in the Ultrathin Limit.

The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this Letter, we demonstrate the synthesis of epitaxial thin films of Cs_{3}Sb on 3C-SiC (001) using molecular-beam epitaxy. Films as thin as 4nm have quantum efficiencies exceeding 2% at 532nm. We also find that epitaxial films have an order of magnitude larger quantum efficiency at 650nm than comparable polycrystalline films on Si. Additionally, these films permit angle-resolved photoemission spectroscopy measurements of the electronic structure, which are found to be in good agreement with theory. Epitaxial films open the door to dramatic brightness enhancements via increased efficiency near threshold, reduced surface disorder, and the possibility of engineering new photoemission functionality at the level of single atomic layers.

Toward fully automated UED operation using two-stage machine learning model

To demonstrate the feasibility of automating UED operation and diagnosing the machine performance in real time, a two-stage machine learning (ML) model based on self-consistent start-to-end simulations has been implemented. This model will not only provide the machine parameters with adequate precision, toward the full automation of the UED instrument, but also make real-time electron beam information available as single-shot nondestructive diagnostics. Furthermore, based on a deep understanding of the root connection between the electron beam properties and the features of Bragg-diffraction patterns, we have applied the hidden symmetry as model constraints, successfully improving the accuracy of energy spread prediction by a factor of five and making the beam divergence prediction two times faster. The capability enabled by the global optimization via ML provides us with better opportunities for discoveries using near-parallel, bright, and ultrafast electron beams for single-shot imaging. It also enables directly visualizing the dynamics of defects and nanostructured materials, which is impossible using present electron-beam technologies.

Tapered helical undulator system for high efficiency energy extraction from a high brightness electron beam

In this paper we discuss the design choices and construction strategy of the tapered undulator system designed for a high energy extraction efficiency experiment in the ultraviolet region of the electromagnetic spectrum planned for installation at the Argonne National Laboratory Linac Extension Area (LEA) beamline. The undulator is comprised of 4 sections pure permanent magnet Halbach array separated by short break sections, each one of them housing a focusing quadrupole doublet and a phase shifter. The quadrupoles use a novel hybrid design which allows one to vary the gradient and match the beam transversely. The undulator tapering profile is optimized to maximize the energy conversion efficiency from a 343 MeV 1 kA beam into coherent 257.5 nm radiation taking into account the longitudinal current profile generated by the linac.

Analysis of slice transverse emittance evolution in a very-high-frequency gun photoinjector

Emittance is a key figure-of-merit for high brightness electron beams that enable the success of a broad range of modern accelerator-based instruments. With the successful implementation of the emittance compensation scheme and beam-shaping techniques to align each temporal beam slice in phase space, slice emittance starts to play a more dominating role in determining the beam quality. In this paper, we develop an approach, combining simulations and analytical calculations, to systematically study the evolution of the slice emittance in a very high frequency gun photoinjector, which is under intense R worldwide for driving the next generation continuous-wave accelerators. Our approach is capable of tracing various sources that introduce curvature in the transverse phase space, corresponding to the growth of the slice emittance. It is shown that nonlinear transverse space charge forces in the vicinity of cathodes and the spherical aberration of the focusing solenoid are the main sources of nonlinear forces, while in a long drift section space charge forces can actually compensate for nonlinear transverse position-momentum correlations and hence recover the emittance. We further demonstrate that the sources of nonlinearities can be controlled by tailoring the transverse beam density profile and the design of solenoid lenses.

Energy recovery linac based fully coherent light source

Energy recovery linac (ERL) holds great promise for generating high repetition-rate and high brightness electron beams. The application of ERL to drive a free-electron laser is currently limited by its low peak current. In this paper, we consider the combination of ERL with the recently proposed angular-dispersion induced microbunching technique to generate fully coherent radiation pulses with high average brightness and tunable pulse length. Start-to-end simulations have been performed based on a low energy ERL (600 MeV) for generating coherent EUV radiation pulses. The results indicate an average brightness over 1025 phs/s/mm2/mrad2/0.1%BW and average power of about 100 W at 13.5 nm or 20 W with the spectral resolution of about 0.5 meV with the proposed technique. Further extension of the proposed scheme to shorter wavelength based on an ERL complex is also discussed.

Brightness evaluation of pulsed electron gun using negative electron affinity photocathode developed for time-resolved measurement using scanning electron microscope

Temporal changes in carrier relaxations, magnetic switching, and biological structures are known to be in the order of ns. These phenomena can be typically measured by means of an optical-pump & electron-probe method using an electron microscope combined with a pulsed electron source. A photoemission-type pulsed electron gun makes it possible to obtain a short-pulsed electron beam required for high temporal resolution. On the other hand, spatial resolution is restricted by the brightness of the pulsed electron gun used in electron microscopes when a low brightness electron source is used and an irradiation current larger than a certain value is required. Thus, we constructed a prototype pulsed electron gun using a negative electron affinity (NEA) photocathode for time-resolved measurement using a scanning electron microscope (SEM) with high spatiotemporal resolution. In this study, a high-speed detector containing an avalanche photodiode (APD) was used to directly measure waveforms of the pulsed electron beam excited by a rectangular-shape pulsed light with a variable pulse duration in the range of several ns to several μs. The measured waveforms were the same rectangular shape as incident pulsed excitation light. The maximum peak brightness of the pulsed electron beam was 4.2×107 A/m2/sr/V with a pulse duration of 3 ns. This value was larger than that of the continuous electron beam (1.6 × 107 A/m2/sr/V). Furthermore, an SEM image with image sharpness of 6.2 nm was obtained using an SEM equipped with a prototype pulsed electron gun at an acceleration voltage of 3 kV.

High Brightness Electron Beams from Dragon Tail Injection and the E-312 Experiment at FACET-II

High Brightness Electron Beams from Dragon Tail Injection and the E-312 Experiment at FACET-II

Investigation of the Effect of Structural Properties of a Vertically Standing CNT Cold Cathode on Electron Beam Brightness and Resolution of Secondary Electron Images.

Carbon nanotube (CNT)-based cold cathodes are promising sources of field emission electrons for advanced electron devices, particularly for ultra-high-resolution imaging systems, due to their high brightness and low energy spread. While the electron field emission properties of single-tip CNT cathodes have been intensively studied in the last few decades, a systematic study of the influencing factors on the electron beam properties of CNT cold cathodes and the resolution of the secondary electron images has been overlooked in this field. Here, we have systematically investigated the effect of the structural properties of a CNT cold cathode on the electron beam properties and resolution of secondary electron microscope (SEM) images. The aspect ratio (geometric factor) and the diameter of the tip of a vertically standing CNT cold cathode significantly affect the electron beam properties, including the beam size and brightness, and consequently determine the resolution of the secondary electron images obtained by SEM systems equipped with a CNT cold cathode module. Theoretical simulation elucidated the dependence of the structural features of CNT cold cathodes and electron beam properties on the contribution of edge-emitted electrons to the total field emission current. Investigating the correlations between the structural properties of CNT cold cathodes, the properties of the emitted electron beams, and the resolution of the secondary electron images captured by SEM equipped with CNT cold cathode modules is highly important and informative as a basic model.

Reduction of surface roughness emittance of Cs3Sb photocathodes grown via codeposition on single crystal substrates

Alkali antimonide photocathodes are capable of generating high brightness electron beams given their high quantum efficiency and low mean transverse energy (MTE). Increasing the brightness of the photoemitted electron beams beyond the current state of the art requires surface control of the photocathode at the atomic scale, since the beam brightness at the cathode is degraded by a rough, inhomogeneous surface. In this work, we grow cesium antimonide photocathodes on single crystal substrates (Al2O3, TiO2, 3C–SiC, and a control sample on Si) and study the resulting surface morphology with scanning tunneling microscopy (STM). We observe dramatic changes in surface morphology across substrates. In particular, we demonstrate 10 times larger island size and significantly reduced roughness on two samples grown on 3C–SiC(100) substrates as compared to samples on other substrates. By computing the local electric fields which these surfaces would generate in an electron accelerator source, we estimate the roughness-induced contribution to MTE. Across samples, the calculated contribution to MTE varies by a factor of 17, and the smallest value computed is 12 meV at an extraction field of 50 MV/m, which is smaller than typical values for alkali antimonides. Additionally, we show that oxidation, commonly encountered in vacuum transfer and in accelerator operation, does not affect the measured surface morphology. Our findings suggest that even in high field environments, the brightness of the photocathodes grown on 3C–SiC will be primarily determined by the material's electronic properties rather than by spurious fields generated by photocathode roughness.

Matrix model for collective phenomena in electron beam\u2019s longitudinal phase space

The possibility to predict, characterize and minimize the presence of spurious harmonic content in the longitudinal profile of high brightness electron beams, namely the microbunching instability, has become vital to ensure accurate modeling and reliable operation of radiofrequency and plasma-based linear accelerators such as those driving free-electron lasers. Recently, the impact of intrabeam scattering (IBS) on the instability has been experimentally demonstrated by the authors. This work complements that experimental study by extending existing theories in a self-consistent, piece-wise calculation of IBS in single pass linacs and multi-bend transfer lines. New expressions for the IBS are introduced in two different semi-analytical models of microbunching. The accuracy of the proposed models and the range of beam parameters to which they apply is discussed. The overall modeling turns out to be a fast comprehensive tool for the optimization of linac-driven free-electron lasers.

Cascaded high-gradient terahertz-driven acceleration of relativistic electron beams

Terahertz (THz)-driven acceleration has recently emerged as a new route for delivering ultrashort bright electron beams efficiently, reliably, and in a compact setup. Many THz-driven acceleration related working schemes and key technologies have been successfully demonstrated and are continuously being improved to new limits. However, the achieved acceleration gradient and energy gain remain low, and the potential physics and technical challenges in the high field and high energy regime are still under-explored. Here we report a record energy gain of 170 keV in a single-stage configuration, and demonstrate the first cascaded acceleration of a relativistic beam with a 204 keV energy gain in a two-stages setup. Whole-bunch acceleration is accomplished with an average accelerating gradient of 85 MV/m and a peak THz electric field of 1.1 GV/m. This proof-of-principle result is a crucial advance in THz-driven acceleration with a major impact on future electron sources and related scientific discoveries.

Electron lenses: historical overview and outlook

The first electron lenses — understood as “lenses made of electrons” rather than “lenses to focus electrons” — were envisioned in the mid-1990s and built in the early 2000s for compensation of beam-beam effects in the Tevatron proton-antiproton collider. Since then, the lenses — a novel instrument for high-energy particle accelerators — have been added to the toolbox of modern beam facilities, being particularly useful for the energy frontier superconducting hadron colliders (“supercolliders”). In this article we briefly present the history of ideas and developments toward effective use of low-energy high-current bright electron beams in high energy accelerators and discuss the promise of their future applications.

Enhanced seeded free electron laser performance with a “cold” electron beam

FERMI is a seeded free electron laser (FEL) based on the high gain harmonic generation (HGHG) scheme and has been generating intense and fully coherent extreme ultra-violet and soft x-ray pulses for several years. The high-degree performance of the FEL leans on a high brightness electron beam, with small transverse emittance ($\ensuremath{\sim}1\text{ }\text{ }\ensuremath{\mu}\mathrm{m}$) and a peak current of about 700-800 A. The main constraint on lasing at high harmonics of the seed is low electron time-slice energy spread. The optimization of the photoinjector and of some linac parameters has allowed a reduction of the relative slice energy spread to the level of few times of ${10}^{\ensuremath{-}5}$. With these new conditions, the FEL can be operated without the need of a laser heater to suppress micro bunching instabilities and this ``cold'' beam has allowed generation of extreme UV pulses with pulse energy exceeding a mJ, and with peak power of about 10 GW. We describe the electron beam characterization and the FEL performance improvement, including the extension of the range of harmonics of the seed which can be amplified, up to the twenty-fifth harmonic, i.e., 10 nm.

Octupole based current horn suppression in multistage bunch compression with emittance growth correction

High brightness electron beams are critical for x-ray free-electron laser performance. To achieve higher peak current, strong longitudinal compression often produces electron beams with peaks in the head and/or tail of the current profile. These current horns are formed after bunch compression due to nonlinear correlations in the longitudinal phase space and the higher order optics of the compressor. It has been suggested that this higher order compression can be corrected by inserting an octupole magnet near the center of a bunch compressor. However, this scheme provides a correlated transverse kick leading to growth of the projected emittance. We present here a method whereby octupole magnets are inserted into two sequential bunch compressors. By tuning a $\ensuremath{\pi}$ betatron phase advance between the two octupoles, the correlated transverse kick from the first octupole can be corrected by the second, while providing a cummulative adjustment of the higher order compression.

Electron Beam Transport in Plasma-Accelerator-Driven Free-Electron Lasers in the Presence of Coherent Synchrotron Radiation and Microbunching Instability

Laser- and beam-driven plasma accelerators promise electron beam brightness at the exit of plasma cells suitable for X-ray free-electron lasers. Beam transport from the accelerator to the undulator may include a multi-bend, energy-dispersive switchyard, in which energy collimators can be installed to protect the undulator or to serve multiple photon beamlines. Coherent synchrotron radiation and microbunching instability in the switchyard can seriously degrade the brightness of the accelerated beam, reducing the lasing efficiency. We present a semi-analytical analysis of those collective effects for beam parameters expected at the exit of state-of-the-art plasma accelerators. Prescriptions for the linear optics design used to minimize transverse and longitudinal beam instability are discussed.

Development of an L-band photocathode RF gun at Tsinghua University

This study reports on the development of an L-band photocathode RF gun for delivering high brightness electron beams with high average power. We designed and fabricated an L-band normal conducting photocathode RF gun at Tsinghua University. RF performance is improved after optimization of the cavity geometry referring to the PITZ gun. A newly designed solenoid that encloses the entire cavity body has been designed to suppress the emittance growth, and dynamic simulation shows a lower transverse emittance. A coupled 3D RF-thermal-structure analysis is carried out to investigate the thermal-induced effects under the operating condition. Cold test results are also presented in this paper. This gun is now under commissioning and beam tests will be discussed in future works.

Radiation Generation with an Existing Demonstrator of an Energy-Recovery Continuous-Wave Superconducting RF Accelerator

Over the past decades, many accelerator laboratories have put much effort into the development of compact energy-recovery linac (ERL) demonstrators to verify various physical and technical aspects of the generation, acceleration, transport and energy recovery of high brightness and high average current electron beams in a superconducting radio-frequency (SRF) linear accelerator. Beyond these goals, the ERL demonstrator also offers unique opportunities to study novel schemes for THz and X-ray radiation generation. In this paper, we discuss feasible options for schemes generating THz and X-ray radiation at low-energy continuous-wave (CW) SRF ERL demonstrators such as the bERLinPro accelerator.