Brewster Angle Research Articles

Tunable quantized spin Hall effect of light in graphene

The spin Hall effect of light is an appealing toolset for metrology that holds incredible potential for precision measurements due to its high sensitivity to the refractive index and nanostructure physical parameters. Here, we theoretically examine the quantized spin Hall effect of light on the surface of a monolayer graphene–substrate system subjected to an external perpendicular magnetic field. We discuss the impact of Landau levels induced by the external magnetic field B and the photon energy on magneto-optical conductivities and Fresnel reflection coefficients. We find that the spin-dependent splittings in graphene exhibit quantized characteristics due to the Landau levels quantization of the magneto-optical conductivities and Fresnel’s reflection coefficients near the Brewster angle. Moreover, the spin-dependent shifts are quantized and show oscillatory behavior with changes in the magnetic field and the photon energy. Our results manifest that the quantized photonic spin-dependent separations are sensitive to variations in the incidence angle, magnetic field, and incident photonic energies. The quantized spin-dependent splitting opens a promising route to find the quantized Hall conductivity and discrete Landau levels in the monolayer graphene by a direct optical weak measurement.

Surface Chemistry Study of Normal and Diseased Human Meibum Films Prior to and after Supplementation with Tear Mimetic Eyedrop Formulation

Ophthalmic nanoemulsions that can treat the deficiencies of meibum (MGS) in Meibomian gland disease and restore its functionality in the tear film are greatly sought. The Rohto Dry Aid (RDA) formulation employs TEARSHIELD TECHNOLOGYTM, which uses a multicomponent oil phase of polar and non-polar lipid-like molecules selected to mimic the profiles of healthy meibum. Thus, the interactions of RDA with “diseased” Meibomian (dMGS) films merit deeper analysis, as these interactions might offer important clues for both the development of new ocular formulations and the processes behind the therapeutic action of the nanoemulsions. Pseudobinary dMGS/RDA films were spread at the air–water surface of the Langmuir trough. Surface pressure-area isocycles and stress relaxations were used to access the layer’s response to blink-like cycling and dilatational viscoelasticity, respectively, while film morphology was recorded via Brewster angle microscopy. It was found that RDA is able to reverse the brittleness and to restore the stability of “diseased” MGS films and thus to revert the layer’s properties to the functionality of healthy Meibomian lipids. Therefore, in order to effectively treat dry eyes with MGS-oriented therapy, ophthalmic nanoemulsions warrant more research.

Topological Phase Singularities in Light Reflection from Non‐Hermitian Uniaxial Media

AbstractPerfect light transmission into a dielectric at the Brewster angle is one of the simplest effects of macroscopic electromagnetism. The common wisdom states that absorption in the dielectric violates Brewster angle and leads to a non‐vanishing reflection. Yet, incorporating anisotropy may recover perfect transmission of p‐polarized light into the absorbing medium. Unlike the ordinary “lossless” Brewster angle, perfect transmission in this case is accompanied by phase singularities of the reflection amplitude. In this paper, phase singularities and the associated topological charges are theoretically examined as emerging in the wavelength‐incidence angle space upon perfect transmission into absorbing uniaxial dielectrics. The analytical criterion of perfect light transmission into an anisotropic medium is derived, phase singularities are demontrated in these scenarios, and their dynamics are studied as a function of material parameters. Finally, by lowering the symmetry of the problem, this phenomenon is translated into a different parameter space of wave vector components, and illustrate the feasibility of this phenomenon with available optically anisotropic materials. The results may become valuable for the development of novel analog computing schemes and holography approaches.

Morphology Observation of Two-Dimensional Monolayers of Model Proteins on Water Surface as Revealed by Dropping Method.

We have investigated the morphology of two-dimensional monolayers of gramicidin-D (GD) and alamethicin (Al) formed on the water surface by the dropping method (DM) using surface tension measurement (STm), Brewster angle microscopy (BAM), and atomic force microscopy (AFM). Dynamic light scattering (DLS) revealed that GD in alcoholic solutions formed a dimeric helical structure. According to the CD and NMR spectroscopies, GD molecules existed in dimer form in methanol and lipid membrane environments. The STm results and BAM images revealed that the GD dimer monolayer was in a liquid expanded (LE) state, whereas the Al monolayer was in a liquid condensed (LC) state. The limiting molecular area (A0) was 6.2 ± 0.5 nm2 for the GD-dimer and 3.6 ± 0.5 nm2 for the Al molecule. The AFM images also showed that the molecular long axes of both the GD-dimer and Al were horizontal to the water surface. The stability of each monolayer was confirmed by the time dependence of the surface pressure (π) observed using the STm method. The DM monolayer preparation method for GD-dimer and Al peptide molecules is a useful technique for revealing how the model biological membrane's components assemble in two dimensions on the water surface.

Spiral packing and chiral selectivity in model membranes probed by phase-resolved sum-frequency generation microscopy

Since the lipid raft model was developed at the end of the last century, it became clear that the specific molecular arrangements of phospholipid assemblies within a membrane have profound implications in a vast range of physiological functions. Studies of such condensed lipid islands in model systems using fluorescence and Brewster angle microscopies have shown a wide range of sizes and morphologies, with suggestions of substantial in-plane molecular anisotropy and mesoscopic structural chirality. Whilst these variations can significantly alter many membrane properties including its fluidity, permeability and molecular recognition, the details of the in-plane molecular orientations underlying these traits remain largely unknown. Here, we use phase-resolved sum-frequency generation microscopy on model membranes of mixed chirality phospholipid monolayers to fully determine the three-dimensional molecular structure of the constituent micron-scale condensed domains. We find that the domains possess curved molecular directionality with spiralling mesoscopic packing, where both the molecular and spiral turning directions depend on the lipid chirality, but form structures clearly deviating from mirror symmetry for different enantiomeric mixtures. This demonstrates strong enantioselectivity in the domain growth process and indicates fundamental thermodynamic differences between homo- and heterochiral membranes, which may be relevant in the evolution of homochirality in all living organisms.

Magnetically tunable Brewster angle in uniaxial magneto-optical metamaterials for advanced integration of high-resolution sensing devices.

In this Letter, we introduce a concept to produce high-resolution, highly integrable biosensing devices. Our idea exploits the highly absorbing modes in multilayered metamaterials to maximize the transverse magneto-optical Kerr effect (TMOKE). Results are discussed in the context of dielectric uniaxial (ε eff,∥ ε eff,⊥>0) and hyperbolic metamaterial (ε eff,∥ ε eff,⊥<0) regimes. For applications in gas sensing, we obtained sensitivities of S = 46.02 deg/RIU and S = 73.91 deg/RIU when considering the system working in the uniaxial and hyperbolic regimes, respectively, with figures of merit (resolution) in the order of 310 or higher. On the contrary, when considering the system for biosensing applications (incidence from an aqueous medium), we observed that the proposed mechanism can only be successfully used in the uniaxial regime, where a sensitivity of 56.87 deg/RIU was obtained.

Direct Evidence of Klein and Anti-Klein Tunneling of Graphitic Electrons in a Corbino Geometry.

Transport measurement of electron optics in monolayer graphene p-n junction devices has been traditionally studied with negative refraction and chiral transmission experiments in Hall bar magnetic focusing setups. We show direct signatures of Klein (monolayer) and anti-Klein (bilayer) tunneling with a circular "edgeless" Corbino geometry made out of gated graphene p-n junctions. Noticeable in particular is the appearance of angular sweet spots (Brewster angles) in the magnetoconductance data of bilayer graphene, which minimizes head-on transmission, contrary to conventional Fresnel optics or monolayer graphene which show instead a sharpened collimation of transmission paths. The local maxima on the bilayer magnetoconductance plots migrate to higher fields with increasing doping density. These experimental results are in good agreement with detailed numerical simulations and analytical predictions.

Giant enhancement of positive and negative Goos-Hänchen shifts in two-dimensional grating waveguide structures supporting Fano resonances

We propose a two-dimensional grating waveguide structure based on guided-mode resonance (GMR) to greatly enhance the Goos-Hänchen (GH) shift due to the asymmetric Fano peak. In addition, the enhancement of the GH shift is located at the peak of the reflectivity, which enables a more accessible measurement compared to the conventional GH shift enhancement based on Brewster angle or transmission-type resonance. In particular, such structure supports four channels for the GH shift enhancements, with a maximum value of 4.8×104λ0 for the positive one and -6000 λ0 for the negative one. Our results benefit the potential applications for optical sensors, optical filters, optical absorbers and surface plasmon resonators, etc.

Shift of Brewster's angle with two-dimensional materials and structures

The Brewster effect has a number of applications in antireflection coatings, spectroscopy, and polarization optics, but its tunability is still of high demand. In this Letter, we discover a method of Brewster angle control with two-dimensional conducting layers. Namely, we analyze the angular shift of Brewster's angle depending on the surface conductivity of a two-dimensional layer. First, we derive the analytical model with exact conductivity-dependent solution. Then, we investigate the Brewster angle shift in the cases of monolayer graphene and plasmonic metasurface. Finally, we support our analytical results by the full-wave numerical simulations. The results obtained may find a plethora of applications in flat optical and planar photonic devices. Published by the American Physical Society 2024

Understanding the Retention of Vaping Additives in the Lungs: Model Lung Surfactant Membrane Perturbation by Vitamin E and Vitamin E Acetate.

Deviations from the normal physicochemical and functional properties of pulmonary surfactants are associated with the incidence of lung injury and other respiratory disorders. This study aims to evaluate the alteration of the 2D molecular organization and morphology of pulmonary surfactant model membranes by the electronic cigarette additives α-tocopherol (vitamin E) and α-tocopherol acetate (vitamin E acetate), which have been associated with lung injury, termed e-cigarette or vaping-use-associated lung injury (EVALI). The model membranes used contained a 7:3 molar ratio of DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and POPG (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol) to which α-tocopherol and α-tocopherol acetate were added to form mixtures of up to 20 mol % additive. The properties of the neat tocopherol additives and DPPC/POPG (7:3) mixtures with increasing molar proportions of additive were evaluated by surface pressure-area isotherms, excess area calculations, Brewster angle microscopy, grazing incidence X-ray diffraction, X-ray reflectivity, and atomic force microscopy. The addition of either additive alters the essential phase balance of the model pulmonary surfactant membrane by generating a greater proportion of the fluid phase. Despite this net fluidization, both tocopherol additives have space-filling effects on the liquid-expanded and condensed phases, yielding negative excess areas in the liquid-expanded phase and reduced tilt angles in the condensed phase. Both tocopherol additives alter the stability of the fluid phase, pushing the eventual collapse of this phase to higher surface pressures than the model membrane in the absence of an additive.

Mesoscale self-organization of polydisperse magnetic nanoparticles at the water surface.

In this study, we investigated the self-ordering process in Langmuir films of polydisperse iron oxide nanoparticles on a water surface, employing in situ x-ray scattering, surface pressure-area isotherm analysis, and Brewster angle microscopy. X-ray reflectometry confirmed the formation of a monolayer, while grazing incidence small-angle x-ray scattering revealed short-range lateral correlations with a characteristic length equal to the mean particle size. Remarkably, our findings indicated that at zero surface pressure, the particles organized into submicrometer clusters, merging upon compression to form a homogeneous layer. These layers were subsequently transferred to a solid substrate using the Langmuir-Schaefer technique and further characterized via scanning electron microscopy and polarized neutron reflectometry. Notably, our measurements revealed a second characteristic length in the lateral correlations, orders of magnitude longer than the mean particle diameter, with polydisperse particles forming circular clusters densely packed in a hexagonal lattice. Furthermore, our evidence suggests that the lattice constant of this mesocrystal depends on the characteristics of the particle size distribution, specifically the mean particle size and the width of the size distribution. In addition, we observed internal size separation within these clusters, where larger particles were positioned closer to the center of the cluster. Finally, polarized neutron reflectometry measurements provided valuable insights into the magnetization profile across the layer.

Translational use of homing peptides: Tumor and placental targeting

HypothesisTissue-specific homing peptides have been shown to improve chemotherapeutic efficacy due to their trophism for tumor cells. Other sequences that selectively home to the placenta are providing new and safer therapeutics to treat complications in pregnancy. Our hypothesis is that the placental homing peptide RSGVAKS (RSG) may have binding affinity to cancer cells, and that insight can be gained into the binding mechanisms of RSG and the tumor homing peptide CGKRK to model membranes that mimic the primary lipid compositions of the respective cells. ExperimentsFollowing cell culture studies on the binding efficacy of the peptides on a breast cancer cell line, a systematic translational characterization is delivered using ellipsometry, Brewster angle microscopy and neutron reflectometry of the extents, structures, and dynamics of the interactions of the peptides with the model membranes on a Langmuir trough. FindingsWe start by revealing that RSG does indeed have binding affinity to breast cancer cells. The peptide is then shown to exhibit stronger interactions and greater penetration than CGKRK into both model membranes, combined with greater disruption to the lipid component. RSG also forms aggregates bound to the model membranes, yet both peptides bind to a greater extent to the placental than cancer model membranes. The results demonstrate the potential for varying local reservoirs of peptide within cell membranes that may influence receptor binding. The innovative nature of our findings motivates the urgent need for more studies involving multifaceted experimental platforms to explore the use of specific peptide sequences to home to different cellular targets.

A broad-angle spectrum reflection pump–probe technique based on the Brewster angle

A broad-angle spectrum reflection pump–probe technique based on the Brewster angle

Magnetically controlled insertion of magnetic nanoparticles into membrane model

Polysaccharide–coated magnetic nanoparticles (MNPs) have been reported to show potential applications in many biomedical fields. In this report, we have studied the interactions between magnetite (Fe3O4) MNPs functionalized with polysaccharides (diethylamino–ethyl dextran, DEAE–D or chitosan, CHI) with different membranes models by Langmuir isotherms, incorporation experiments, and brewster angle microscopy (BAM). In this report, zwitterionic 1,2–distearoyl–sn–glycerol–3–phosphoethanolamine (DSPE) and anionic 1,2–distearoyl–sn–glycerol–3–phosphate (DSPA) phospholipid, were used to form membrane models. Incorporation experiments (π–t) as well as the compression isotherms demonstrate positive interactions between MNPs and DSPE or DSPA monolayers. The study assessed the impact of varying initial surface pressure on a preformed phospholipid monolayer to determine the maximum insertion pressure (MIP) and synergy. Our findings indicate that the primary driving force of the coated MNPs incorporation into the monolayer predominantly stems from electrostatic interaction. The drop in the subphase pH from 6.0 to 4.0 led to an enhancement of the MIP value for DSPA phospholipid monolayer. On the other hand, for DSPE, the drop in the pH does not affect the MIP values. Besides, the presence of a magnetic field induces an enhancement of the insertion process of the MNPs into DSPA preformed monolayer, demonstrating that a previous interaction between MNPs and phospholipid preformed monolayer needs to take place to enhance the incorporation process. This work opens novel perspectives for the research of the influence of magnetic fields on the incorporation of MNPs into model membranes.

Self-Consistent Explanation of the Untwist Alignment of Ferroelectric Nematic Liquid Crystals with Decreasing Cell Thickness and Deviation of the Surface Easy Axis Experimented upon Using the Brewster Angle Reflection Method

The huge dielectric constant of ferroelectric nematic liquid crystals (FNLCs) seems to bring about a difficulty of molecular alignment control in exchange for a potential device application. To obtain a satisfactory level of uniform molecular alignment, it is essential to understand how the molecules near the alignment surface are anchored. In this study, bulk molecular alignment with an anti-parallel rubbing manner, which has not yet been investigated extensively, is explained using a conventional torque balance model introducing a polar anchoring function, and it is shown that the disappearance of the bulk twist alignment with decreasing cell thickness can be explained self-consistently. To validate this estimation for a room-temperature FNLC substance, the Brewster angle reflection method was attempted to confirm the surface director’s deviation from the rubbing direction caused by the polar surface anchoring.

Dynamically tunable photonic spin Hall effect based on insulating-metallic phase transition of Vanadium Dioxide

The photonic spin Hall effect (PSHE) can manifest as the spin-dependent splitting (perpendicular to the plane of incidence) of a light beam, i.e., transverse beam shift. Introducing dynamically tunable PSHE into post-fabricated systems has great potential for the new type of photonic devices and its tuning range can be manipulated with different reconfigurable methods. Most of these methods are based on modifying the refractive index of bulk or interface materials. However, the perturbation on the refractive index is usually small, leading to difficulty in enhancing PSHE. Fortunately, the changes in the refractive index of Vanadium Dioxide (VO2) with insulating-metallic phase transition can be larger in several orders than that of other materials, making it possible for enhancing PSHE to have greater tuning range. Here, to explore the dynamically tunable PSHE based on the insulating-metallic phase transition of VO2, the transverse beam shift (as an indicator of PSHE) was calculated with a full wave theory at a wavelength of 1550 nm in a layered structure. Without a gold layer, only the PSHE of the H-polarized beam shows significant tunability in the insulating-metallic phase transition of VO2. With the Au layer, the PSHE of the H- and V-polarized beam is enhanced around the Brewster and Brewster-like (originating from the destructive interference between the nanosized layers) angle, respectively. For H- and V-polarized beams, the tuning range of PSHE is mainly determined by the insulating phase of VO2 and can be enhanced with the Au layer. Finally, as an example, the enhanced tuning range makes the output of a two-digit binary code conversion based on PSHE easier to recognize. These results offer us possible ways to control the tuning range of PSHE in post-fabricated systems and provide more potential for new applications.

Compact module for complementary-channel THz pulse slicing

We present a modular quasi-optical pulse slicer designed for use at terahertz (THz) frequencies. Given a quasi-cw input, the two outputs of a module are (1) a pulse with programmable duration and (2) its complement. The quasi-optical design incorporates a laser-driven silicon switch at Brewster's angle to the incoming THz beam, which limits undesired reflections before the switch is activated such that THz power is only transmitted when the switch is “on.” An “off” switch ensures that no power is leaked after the pulse and that the switching profile is sharp. The slicer's small footprint (0.048×0.072×0.162 m3) and small insertion loss (1.2 dB at 320 GHz) as well as high switching efficiency (∼70%) allows modules to be stacked to create multiple pulses. The output channel that is not used for experiments can be used for concurrent analysis of beam parameters. Stacking modular assemblies will enable more complex sequences of kW-level pulses than are currently achievable for applications including free-electron-laser or gyrotron-powered pulsed electron spin resonance at high magnetic fields.

Interaction of sakuranetin with unsaturated lipids forming Langmuir monolayers at the air-water interface: A biomembrane model

This study investigates the interaction between sakuranetin, a versatile pharmaceutical flavonoid, and monolayers composed of unsaturated phospholipids, serving as a surrogate for cell membranes. The phospholipids were 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE). We conducted a series of experiments to comprehensively investigate this interaction, including surface pressure assessments, Brewster angle microscopy (BAM), and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). Our findings unequivocally demonstrate that sakuranetin interacts with these phospholipids, expanding the monomolecular films. Notably, regarding POPC, the presence of sakuranetin led to a reduction in stability and a decline in surface elasticity, which can likely be attributed to intricate molecular rearrangements at the interface. The visual evidence of aggregations in BAM images reinforces the interactions substantiated by PM-IRRAS, highlighting sakuranetin's interaction with the polar and nonpolar regions of POPC. However, it is worth noting that these aggregations do not appear to contribute significantly to the viscosity of the mixed film, and our investigations did not reveal any substantial hysteresis. In contrast, when examining POPE, we observed a minor reduction in thermodynamic stability, indicative of fewer rearrangements within the monolayer. This notion was further reinforced by the limited presence of aggregations in the BAM images. Sakuranetin also increased the rigidity of the lipid monolayer; nevertheless, the monolayer remained predominantly elastic, facilitating easy re-spreading on the surface, especially for the first lipid. PM-IRRAS analysis unveiled interactions between sakuranetin and POPE's polar and nonpolar segments, compellingly explaining the observed monolayer expansion. Taken together, our data suggest that sakuranetin was more effectively incorporated into the monomolecular layer of POPE, indicating that membranes comprised of POPC might exhibit a greater degree of interaction in the presence of this pharmacologically active compound.

Dynamic properties of the layers of cupin-1.1 aggregates at the air/water interface

Spread layers of amorphous aggregates of the structural domain of plant protein vicilin, cupin-1.1, at the water – air interface were studied by the surface tensiometry, dilational surface rheology, Brewster angle and atomic force microscopy. The layer properties differed strongly from the results for the layers of previously studied proteins. The dependency of the dynamic elasticity of the layer on surface pressure had two local maxima with the second peak being four times higher than the first one. In the region of the first maximum the obtained results are similar to those for dispersions of polymer microgels with a hairy corona. At the beginning of surface compression separate threads of the corona are stretched along the surface and the surface elasticity increases. The further compression results in the formation of loops and tails leading to a decrease of the elasticity. The second local maximum of the dynamic surface elasticity is presumably caused by the interactions of the rigid cores of the aggregates leading finally to the formation of multilayer structures at high surface pressures. In this case, the surface elasticity starts to decrease as a result of the segment exchange between different layers at the interface.

Water Adsorption Isotherm and Surface Conductivity of Boroaluminosilicate Glasses.

The surface resistivity of boroaluminosilicate display glasses, which may affect the downstream display panel manufacturing, varies with the relative humidity (RH) of the environment, but the origin of this RH dependence has not been well understood. We have measured the water adsorption behavior on Corning Eagle XG (Glass-E) and Lotus NXT (Glass-L) glass panels using Brewster angle transmission infrared spectroscopy. The IR spectra of adsorbed water were analyzed to obtain the effective thickness of adsorbed water, the distribution of hydrogen-bonding interactions among the adsorbed water molecules, and the isosteric heat of water adsorption. These characteristics were compared with the electrical conductivity (inverse of resistivity) of these two glasses [Appl. Surf. Sci. 2015, 356, 1189]. This comparison revealed the correlation between the conductivity and the water layer structure, which could explain the surface resistivity difference between Glass-E and Glass-L as a function of RH. This study also disputed the previous hypothesis that the water adsorption isotherm would be governed by the areal density of the surface hydroxyl group; instead, it suggested that the network modifier ions may also play a critical role, especially in the intermediate RH regime.