Boronic Acid Research Articles

An improved boron-catalyzed cycloaddition of CO2 to epoxides for the production of five-membered cyclic carbonates under atmospheric versus high-pressure conditions

A series of novel boron-based compounds (boronate esters) (1–8) were designed and successfully synthesized by introducing 3-(bromomethyl)phenylboronic acid into the various cis-diols using a Dean-Stark trap to remove the water formed during the esterification reactions. The synthesized boron-based compounds were characterized by 1H, 13C, and 11B NMR, FT-IR, UV–Vis, LC-MS/MS, elemental analysis, TGA-DTA, and melting point measurement techniques. Additionally, the Lewis acidity of the synthesized boronate esters was investigated by the conventional Gutmann-Beckett test. After the boronate esters were characterized in detail by various spectroscopic techniques, these compounds have been used as organocatalysts for the highly efficient conversion of greenhouse gas CO2 to cyclic carbonates under atmospheric versus high-pressure conditions without any solvents. The best conversion was performed in the presence of an organoboron catalyst (3) and DMAP as cocatalyst, with a 90.0 % yield and 97.7 % selectivities under high reactor pressure and with a 45.2% yield and 97.4% selectivities under atmospheric conditions. In addition, after it was determined that the target organoboron catalysts showed high catalytic activity, the effects of epoxide, base, temperature, CO2 pressure, Lewis acidity, reaction time, and amount of catalyst and base on the catalytic conversion were investigated for these catalysts.

Silver-Promoted Rapid Synthesis of 3-Arylindan-1-ones: Microwave-Assisted Reductive Coupling of N-Tosylhydrazone and Boronic Acids.

An efficient and straightforward one-pot tandem synthesis of 3-arylindan-1-ones was consummated through silver nitrate-promoted C-C coupling of simple indane-1,3-dione with arylboronic acid via 1,3-indanedione monotosylhydrazone under microwave conditions. The resulting series of 3-arylindan-1-ones exhibited impressive yields, surpassing those achievable with traditional methods and requiring a shorter time frame. This innovative approach significantly accelerated the synthesis of biologically active compounds such as (+)-indatraline (Lu 19-005) and several other industrially relevant substances.

Damage-Tolerant and Self-Repairing Web-Like Borate Type Binder Enable Stable Operation of Efficient Si-Based Anodes.

Novel binder designs are shown to be fruitful in improving the electrochemical performance of silicon (Si)-based anodes. However, issues with mechanical damage from dramatic volume change and poor lithium-ion (Li+) diffusion kinetics in Si-based materials still need to be addressed. Herein, an aqueous self-repairing borate-type binder (SBG) with a web-like architecture and high ionic conductivity is designed for Si and SiO electrodes. The 3D web-like architecture of the SBG binder enables uniform stress distribution, while its self-repairing ability promotes effective stress dissipation and mechanical damage repair, thereby enhancing the damage tolerance of the electrode. The tetracoordinate boron ions ( ) in the SBG binder boosts the Li transportation kinetics of Si-based electrodes. Based on dynamic covalent and ionic conductive boronic ester bonds, the diverse requirements of the binder, including uniform stress distribution, self-repairing ability, and high ionic conductivity, can be met by simple components. Consequently, the proposed straightforward multifunction design strategy for binders based on dynamic boron chemistry provides valuable insights into fabricating high-performance Si-based anodes.

An Effective Method for the Evaluation of the Enantiomeric Purity of 1,2-Diacyl-sn-glycero-3-phosphocholine-Based Lipids by NMR Analysis

In this article, we report a very efficient method for the determination of the enantiopurity of 1,2-diacyl-sn-glycero-3-phosphocholine by 1H NMR analysis using a readily available chiral derivatizing boronic acid (CDA), (R)-(2-(((1-phenylethyl)amino)methyl)phenyl)boronic acid. After the removal of the acyl groups of 1,2-diacyl-sn-glycero-3-phosphocholine via methanolysis and washing fatty acid byproducts with CHCl3, the obtained sn-glycero-3-phosphocholine (GPC) with the free diol moiety is derivatized by the chiral boronic acid and analyzed by 1H NMR analysis. The choline methyl resonance of each diastereomer is observed at distinctive chemical shifts in the 1H NMR spectrum. Integration of the respective resonances allows direct determination of the enantiomeric purity. The procedure was tested successfully using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) with different enantiomeric purities and with commercially available 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC).

Ligand Dissociation of Metal-Complex Photocatalysts toward pH-Photomanipulation in Dynamic Covalent Hydrogels for Printing Reprocessable and Recyclable Devices.

Dynamic covalent hydrogels are gaining attention for their potential in smart materials, soft devices, electronics, and more thanks to their impressive mechanical properties, biomimetic structures, and dynamic behavior. However, a significant challenge lies in designing precise and efficient dynamic photochemistry for their preparation, allowing for complex structures and control over the dynamic process. Herein, we propose a general and straightforward orthogonal dynamic covalent photochemistry strategy for preparing high-performance printable dynamic covalent hydrogels, thereby broadening their advanced applications. This photochemical strategy uses a bifunctional photocatalyst to initiate radical polymerization and release ligands through a rapid light-mediated dissociation mechanism. This process leads to a controlled increase in system pH from mildly acidic to alkaline conditions within one hundred seconds, which in turn triggers the pH-sensitive model reactions of boronic acid/diol complexation and Knoevenagel condensation. The orthogonal photochemistry enables the formation of interpenetrated and conjoined networks, significantly enhancing the mechanical properties of the hydrogels. The reversible bonds formed during the process, i.e., boronic ester and unsaturated ketone bonds, confer excellent self-healing, reprocessable, and recyclable properties on the hydrogels through photochemical pH variations. Furthermore, this rapid, controlled fabrication process and dynamic behavior are highly compatible with printing techniques, enabling the design of adaptive and recyclable sensors with different structures. These advancements are promising for various material science, medicine, and engineering applications.

Designing JAK2 Inhibitors Beyond Myeloproliferative Neoplasms ‐ Theoretical and Experimental Analysis for Solid Cancers

AbstractSomatic mutations in JAK2 have been reported to cause myeloproliferative neoplasms, autoimmune disorders, rheumatoid arthritis, and inflammation. JAK2 protein with PDB id 3FUP was selected for docking analysis via cross‐docking. Molecular docking of JAK2 with ATP and crystal ligand revealed their binding affinities and interactions. 3D QSAR models with R2=0.997 and Q2=0.984 having high stability and predictivity were generated. The biological activity of the hit compound obtained from virtual screening, LAS 26879206, was predicted to be 4.21 using the 3D QSAR model. Modification of LAS 26879206 utilizing 3D QSAR contours for modulating its JAK2 inhibitory potential yielded two novel inhibitors with a 2‐aminopyrimidine core – ACP1 and ACPM1. Molecular docking, molecular dynamics simulations, and ADMET analysis indicated improvements in the efficiency of these compounds compared to the hit compound. Synthesis of these compounds was carried out using a two‐step reaction‐ first Buchwald – Hartwig coupling reaction to yield an intermediate ACB1 which was then coupled with appropriate boronic acids via Suzuki reaction to get ACP1 and ACPM1. The effects of these designed compounds as anticancer agents were analyzed in hCT‐116 (human colorectal carcinoma), HeLa (cervical carcinoma), A549 (human lung adenocarcinoma), and A375 (human melanoma) cell lines. ACPM1 was found to be active in all the cell lines with a pIC50 of 5 which was in concordance with the in silico studies. Western blot analysis validated the JAK2 inhibitory property of ACPM1 which can be further ensured by in vivo studies.

Direct Glycan Analysis of Biological Samples and Intact Glycoproteins by Integrating Machine Learning-Driven Surface-Enhanced Raman Scattering and Boronic Acid Arrays

Direct Glycan Analysis of Biological Samples and Intact Glycoproteins by Integrating Machine Learning-Driven Surface-Enhanced Raman Scattering and Boronic Acid Arrays

Stepwise construction of multimetallic complexes supported by heteroditopic NHC/MIC ligands

Stepwise construction of multimetallic complexes supported by heteroditopic NHC/MIC ligands

2D to 3D Reconstruction of Boron-Linked Covalent-Organic Frameworks.

The transformation of two-dimensional (2D) covalent-organic frameworks (COFs) into three-dimensions (3D) is synthetically challenging, and it is typically addressed through interlayer cross-linking of alkene or alkyne bonds. Here, we report the first example of the chemical reconstruction of a 2D COF to a 3D COF with a complete lattice rearrangement facilitated by base-triggered boron hybridization. This chemical reconstruction involves the conversion of trigonal boronate ester linkages to tetrahedral anionic spiroborate linkages. This transformation reticulates the coplanar, closely stacked square cobalt(II) phthalocyanine (PcCo) units into a 3D perpendicular arrangement. As a result, the pore size of COFs expands from 2.45 nm for the initial 2D square lattice (sql) to 3.02 nm in the 3D noninterpenetrated network (nbo). Mechanistic studies reveal a base-catalyzed boronate ester protodeboronation pathway for the formation of the spiroborate structure.

Simultaneous Stereoinvertive and Stereoselective C(sp3)-C(sp3) Cross-Coupling of Boronic Esters and Allylic Carbonates.

With increasing interest in constructing more three-dimensional entities, there has been growing interest in cross-coupling reactions that forge C(sp3)-C(sp3) bonds, which leads to additional challenges as it is not just a more difficult bond to construct but issues of stereocontrol also arise. Herein, we report the stereocontrolled cross-coupling of enantioenriched boronic esters with racemic allylic carbonates enabled by iridium catalysis, leading to the formation of C(sp3)-C(sp3) bonds with single or vicinal stereogenic centers. The method shows broad substrate scope, enabling primary, secondary, and even tertiary boronic esters to be employed, and can be used to prepare any of the four possible stereoisomers of a coupled product with vicinal chiral centers. The new method, which combines the simultaneous enantiospecific reaction of a chiral nucleophile with the enantioselective reaction of a chiral electrophile in a single process, offers a solution for stereodivergent cross-coupling of two C(sp3) fragments.

Deciphering the factors influencing electric field mediated polymerization and depolymerization at the solution–solid interface

Strong and oriented electric fields are known to influence structure as well as reactivity. The strong electric field (EF) between the tip of a scanning tunneling microscope (STM) and graphite has been used to modulate two-dimensional (2D) polymerization of aryl boronic acids where switching the polarity of the substrate bias enabled reversible transition between self-assembled molecular networks of monomers and crystalline 2D polymer (2DP) domains. Here, we untangle the different factors influencing the EF-mediated (de)polymerization of a boroxine-based 2DP on graphite. The influence of the solvent was systematically studied by varying the nature from polar protic to polar aprotic to non-polar. The effect of monomer concentration was also investigated in detail with a special focus on the time-dependence of the transition. Our experimental observations indicate that while the nucleation of 2DP domains is not initiated by the applied electric field, their depolymerization and subsequent desorption, are a consequence of the change in the polarity of the substrate bias within the area scanned by the STM tip. We conclude that the reversible transition is intimately linked to the bias-induced adsorption and desorption of the monomers, which, in turn, could drive changes in the local concentration of the monomers.

Functional Interface for Glycoprotein Sensing: Focusing on Biosensors.

Glycosylated proteins or glycoproteins make up a large family of glycoconjugates, and they participate in a variety of fundamental biological events. Glycoproteins have become important biomarkers in the diagnosis and treatment of a number of tumors. Biosensors are quite suitable for glycoprotein detection. The design and fabrication of a functional sensing interface play a crucial role in the biosensor construction to target glycoproteins. The functional interface, particularly receptors, typically determines the key characteristics of a biosensor, such as selectivity and sensitivity. Antibody, peptide, aptamer, boronic acid derivative, lectin, and molecularly imprinted polymer are all capable receptors for glycoprotein recognition, and each of these will be discussed. Most glycoproteins exist in low abundance, thus rendering signal amplification techniques indispensable. Nucleic acid-mediated and nanomaterial-mediated signal amplification for the detection of glycoproteins will be focused on herein. This review aims to highlight these different functional interfaces for glycoprotein sensing.

Functionalization of Supramolecular Polymers by Dynamic Covalent Boroxine Chemistry.

Molecular scaffolds that enable the combinatorial synthesis of new supramolecular building blocks are promising targets for the construction of functional molecular systems. Here, we report a supramolecular scaffold based on boroxine that enables the formation of chiral and ordered 1D supramolecular polymers, which can be easily functionalized for circularly polarized luminescence. The boroxine monomers are quantitatively synthesized in situ, both in bulk and in solution, from boronic acid precursors and cooperatively polymerize into 1D helical aggregates stabilized by threefold hydrogen-bonding and π-π stacking. We then demonstrate amplification of asymmetry in the co-assembly of chiral/achiral monomers and the co-condensation of chiral/achiral precursors in classical and in situ sergeant-and-soldiers experiments, respectively, showing fast boronic acid exchange reactions occurring in the system. Remarkably, co-condensation of pyrene boronic acid with a hydrogen-bonding chiral boronic acid results in chiral pyrene aggregation with circularly polarized excimer emission and g-values in the order of 10-3. Yet, the electron deficiency of boron in boroxine makes them chemically addressable by nucleophiles, but also sensitive to hydrolysis. With this sensitivity in mind, we provide first insights into the prospects offered by boroxine-based supramolecular polymers to make chemically addressable, functional, and adaptive systems.

Functionalization of Supramolecular Polymers by Dynamic Covalent Boroxine Chemistry

AbstractMolecular scaffolds that enable the combinatorial synthesis of new supramolecular building blocks are promising targets for the construction of functional molecular systems. Here, we report a supramolecular scaffold based on boroxine that enables the formation of chiral and ordered 1D supramolecular polymers, which can be easily functionalized for circularly polarized luminescence. The boroxine monomers are quantitatively synthesized in situ, both in bulk and in solution, from boronic acid precursors and cooperatively polymerize into 1D helical aggregates stabilized by threefold hydrogen‐bonding and π–π stacking. We then demonstrate amplification of asymmetry in the co‐assembly of chiral/achiral monomers and the co‐condensation of chiral/achiral precursors in classical and in situ sergeant‐and‐soldiers experiments, respectively, showing fast boronic acid exchange reactions occurring in the system. Remarkably, co‐condensation of pyrene boronic acid with a hydrogen‐bonding chiral boronic acid results in chiral pyrene aggregation with circularly polarized excimer emission and g‐values in the order of 10−3. Yet, the electron deficiency of boron in boroxine makes them chemically addressable by nucleophiles, but also sensitive to hydrolysis. With this sensitivity in mind, we provide first insights into the prospects offered by boroxine‐based supramolecular polymers to make chemically addressable, functional, and adaptive systems.

Boron catalysis in a designer enzyme.

Enzymes play an increasingly important role in improving the benignity and efficiency of chemical production, yet the diversity of their applications lags heavily behind chemical catalysts as a result of the relatively narrow range of reaction mechanisms of enzymes. The creation of enzymes containing non-biological functionalities facilitates reaction mechanisms outside nature's canon and paves the way towards fully programmable biocatalysis1-3. Here we present a completely genetically encoded boronic-acid-containing designer enzyme with organocatalytic reactivity not achievable with natural or engineered biocatalysts4,5. This boron enzyme catalyses the kinetic resolution of hydroxyketones by oxime formation, in which crucial interactions with the protein scaffold assist in the catalysis. A directed evolution campaign led to a variant with natural-enzyme-like enantioselectivities for several different substrates. The unique activation mode of the boron enzyme was confirmed using X-ray crystallography, high-resolution mass spectrometry (HRMS) and 11B NMR spectroscopy. Our study demonstrates that genetic-code expansion can be used to create evolvable enantioselective enzymes that rely on xenobiotic catalytic moieties such as boronic acids and access reaction mechanisms not reachable through catalytic promiscuity of natural or engineered enzymes.

Application of Biaryl Phosphacycles in Palladium‐Catalysed Suzuki‐Miyaura Cross‐Coupling Reactions of Aryl Chlorides

AbstractThe use of Pd‐catalysts based on biaryl phosphacycles allowed facile Suzuki‐Miyaura couplings of a wide range of deactivated, sterically hindered, and heteroaryl chloride substrates with aryl boronic acids. Notably, the strongly electron‐deficient and sufficiently hindered biaryl phosphacycle ligand 7 consistently demonstrated effective performance.

Nonenzymatic dual glucose sensing on boronic acid modified zeolitic imidazolate framework-67 nanoparticles for diabetes management.

For early diabetes identification and management, the progression of an uncomplicated and exceedingly responsive glucose testing technology is crucial. In this study, we present a new sensor incorporating a composite of metal organic framework (MOF) based on cobalt, coated with boronic acid to facilitate selective glucose binding. Additionally, we successfully employed a highly sensitive electro-optical immunosensor for the detection of subtle changes in concentration of the diabetes biomarker glycated haemoglobin (HbA1c), using zeolitic imidazolate framework-67 (ZIF-67) coated with polydopamine which further modified with boronic acid. Utilizing the polymerization characteristics of dopamine and the NH2 groups, a bonding structure is formed between ZIF-67 and 4-carboxyphenylboronic acid. ZIF-67 composite served as an effective substrate for immobilising 4-carboxyphenylboronic acid binding agent, ensuring precise and highly selective glucose identification. The sensing response was evaluated through both electrochemical and optical methods, confirming its efficacy. Under optimized experimental condition, the ZIF-67 based sensor demonstrated a broad detection range of 50-500mg dL-1, a low limit of detection (LOD) of 9.87mg dL-1 and a high correlation coefficient of 0.98. Furthermore, the 4-carboxyphenylboronic acid-conjugated ZIF-67-based sensor platform exhibited remarkable sensitivity and selectivity in optical-based detection for glycated haemoglobin within the clinical range of 4.7-11.3%, achieving a LOD of 3.7%. These findings highlight the potential of the 4-carboxyphenylboronic acid-conjugated ZIF-67-based electro-optical sensor as a highly sensitive platform for diabetes detection.

Seeking Cells, Targeting Bacteria: A Cascade-Targeting Bacteria-Responsive Nanosystem for Combating Intracellular Bacterial Infections.

Intracellular bacteria pose a great challenge to antimicrobial therapy due to various physiological barriers at both cellular and bacterial levels, which impede drug penetration and intracellular targeting, thereby fostering antibiotic resistance and yielding suboptimal treatment outcomes. Herein, a cascade-target bacterial-responsive drug delivery nanosystem, MM@SPE NPs, comprising a macrophage membrane (MM) shell and a core of SPE NPs. SPE NPs consist of phenylboronic acid-grafted dendritic mesoporous silica nanoparticles (SP NPs) encapsulated with epigallocatechin-3-gallate (EGCG), a non-antibiotic antibacterial component, via pH-sensitive boronic ester bonds are introduced. Upon administration, MM@SPE NPs actively home in on infected macrophages due to the homologous targeting properties of the MM shell, which is subsequently disrupted during cellular endocytosis. Within the cellular environment, SPE NPs expose and spontaneously accumulate around intracellular bacteria through their bacteria-targeting phenylboronic acid groups. The acidic bacterial microenvironment further triggers the breakage of boronic ester bonds between SP NPs and EGCG, allowing the bacterial-responsive release of EGCG for localized intracellular antibacterial effects. The efficacy of MM@SPE NPs in precisely eliminating intracellular bacteria is validated in two rat models of intracellular bacterial infections. This cascade-targeting responsive system offers new solutions for treating intracellular bacterial infections while minimizing the risk of drug resistance.

Ultrafast Self-Healing Elastomer with Closed-Loop Recyclability.

The loss of function after prolonged periods of use is inevitable for all materials including plastics. Hence, self-healing capabilities are a key development to prolong the service lifetime of materials. One of such self-healing capabilities can be achieved by integrating dynamic bonds such as boronic ester linkages into polymeric materials, however the rate of self-healing in these materials is insufficient and current methods to accelerate it are limited. In this study, we report the rational design, synthesis and characterization of a fluorinated elastomer (FBE15) that utilizes enhanced interaction between polymer chains afforded by strong dipole-dipole interactions from -CF3, which showed a significant increase in binding energy to -7.71 Kcal/mol from -5.51 Kcal/mol, resulting in increased interaction between the boronic ester linkages and improving self-healing capabilities of boronic ester materials, drastically reducing the time required for stress relaxation by 900 %. The bulk elastomer is capable of ultrafast self-healing in a one-click fashion that can happen in mere seconds, which can then be stretched to 150 % of its original length. By utilising the dynamic cross-linking, FBE15 is also capable of both mechanical reprocessing into the same materials and chemical recycling into its starting materials, respectively, further allowing reconstruction of the elastomers that have comparable properties to the original ones at the end of its service lifespan.

Synthesis of novel 7-substituted pyrido[3,2-b]pyrazin-3(4H)-one derivatives via Suzuki-Miyaura cross-coupling reaction

In this work, 7-substituted Pyrido[3,2-b]pyrazin-3(4H)-one derivatives are reported starting from 4-methyl-3-nitropyridin-2-amine [1], which underwent further transformations followed by Suzuki–Miyaura coupling reaction under microwave conditions. Primarily, 5-bromo-4-methyl-3-nitropyridin-2-amine (Conejo-Garcia et al., 2010) [2] was prepared according to literature, was converted into many other derivative forms that involve different types of reactions like, reduction, cyclization, chlorination, N-alkylation and yielded as 7-bromo-2,8-dimethyl-4-(2-oxo-2-(pyrrolidin-1-yl)ethyl)pyrido[2,3-b]pyrazin-3(4H)-one (Kamble et al., 2016) [6] which was further subjecting with versatile boronic acids via Suzuki–Miyaura coupling to make comparable novel 7-substituted Pyrido[3,2-b]pyrazin-3(4H)-one derivatives (8a-p). The chemical constructions of all yielded compounds were well elucidated by analytical and spectral analyses (TLC, 1H NMR, 13C NMR, and HRMS).