Scaffolds For Bone Tissue Engineering Research Articles

Decellularized Apple-Derived Scaffolds for Bone Tissue Engineering In Vitro and In Vivo.

Plant-derivedcellulose biomaterials have been employed in various tissue engineering applications. In vivo studies have shown the remarkable biocompatibility of scaffolds made of cellulose derived from natural sources. Additionally, these scaffolds possess structural characteristics that are relevant for multiple tissues, and they promote the invasion and proliferation of mammalian cells. Recent research using decellularized apple hypanthium tissue has demonstrated the similarity of its pore size to that of trabecular bone as well asits ability to effectively support osteogenic differentiation. The present study furtherexamined the potential of apple-derived cellulose scaffolds for bone tissue engineering (BTE) applications and evaluated their in vitro and in vivo mechanical properties. MC3T3-E1 preosteoblasts were seeded in apple-derived cellulose scaffolds that were thenassessed for their osteogenic potential and mechanical properties. Alkaline phosphatase and alizarin red S staining confirmed osteogenic differentiation in scaffolds cultured in differentiation medium. Histological examination demonstrated widespread cell invasion and mineralization across the scaffolds. Scanning electron microscopy (SEM) revealed mineral aggregates on the surface of the scaffolds, andenergy-dispersive spectroscopy (EDS)confirmed the presence of phosphate and calcium elements. However, despite a significant increase in the Young's modulus following cell differentiation, it remained lower than that of healthy bone tissue. In vivo studies showed cell infiltration and deposition of extracellular matrix within the decellularized apple-derivedscaffolds after 8 weeks of implantation in rat calvaria. In addition, the force required to remove the scaffolds from the bone defect was similar to the previously reported fracture load of native calvarial bone. Overall, this study confirms that apple-derived cellulose is a promising candidate for BTE applications. However, the dissimilarity between its mechanical properties and those of healthy bone tissue may restrict its application to low load-bearing scenarios. Additional structural re-engineering and optimization may be necessary to enhance the mechanical properties of apple-derived cellulose scaffolds for load-bearing applications.

Alginate-PVDF piezoelectric hydrogel containing calcium copper titanate- hydroxyapatite as a self-powered scaffold for bone tissue engineering and energy harvesting

We have developed a piezoelectric hydrogel composite comprising cross-linked polyvinylidene fluoride-sodium alginate (PVDF-SA) and calcium copper titanate nanowires (CCTO) as the piezoelectric filler, and hydroxyapatite nanoparticles (HA) as the mineral filler. A freeze-drying method was used to prepare piezoelectric hydrogel scaffold. The PVDF/SA-CCTOs-HA hydrogel composite with 0.5% CCTO and 0.4% HA content demonstrated significantly improved piezoelectric performance. Specifically, it exhibited the highest piezoelectric performance among all samples, with VOC of 7 V and ISC of 3.5 μA. These values were 5.5 and 4.9 times higher, than those of the pure PVDF-SA hydrogel scaffold. The rheology studies explored the viscoelastic properties of hydrogel and found that the hydrogel's solid characteristics led to a higher elastic modulus in comparison to the viscous modulus. The composite exhibited higher compressive and tensile strengths at 8.2 and 0.8 MPa, respectively, compared to the pure hydrogel, which has strengths of 6.3 and 0.4 MPa. In vitro studies revealed the good cytocompatibility, cell proliferation of MC3T3-E1 cells on piezoelectric composite. The PVDF-SA/CCTO-HA demonstrated significant antibacterial properties, offering further advantages for its practical applications. The hydrogel composite can identify various human activities, such as wrist and elbow movements, finger pressing and releasing, and heel pressure. Furthermore, it demonstrated its energy storage capability by charging a 1 μF capacitor. This work offers a practical approach to fabricate hydrogel scaffolds possessing favorable piezoelectric characteristics, biocompatibility, robust mechanical properties, and enhanced proliferation, thereby enabling their extensive utilization in bone tissue engineering applications, human movement detection, and energy harvesting.

3D Printed Piezoelectric BaTiO3/Polyhydroxybutyrate Nanocomposite Scaffolds for Bone Tissue Engineering.

Bone defects are a significant health problem worldwide. Novel treatment approaches in the tissue engineering field rely on the use of biomaterial scaffolds to stimulate and guide the regeneration of damaged tissue that cannot repair or regrow spontaneously. This work aimed at developing and characterizing new piezoelectric scaffolds to provide electric bio-signals naturally present in bone and vascular tissues. Mixing and extrusion were used to obtain nanocomposites made of polyhydroxybutyrate (PHB) as a matrix and barium titanate (BaTiO3) nanoparticles as a filler, at BaTiO3/PHB compositions of 5/95, 10/90, 15/85 and 20/80 (w/w%). The morphological, thermal, mechanical and piezoelectric properties of the nanocomposites were studied. Scanning electron microscopy analysis showed good nanoparticle dispersion within the polymer matrix. Considerable increases in the Young's modulus, compressive strength and the piezoelectric coefficient d31 were observed with increasing BaTiO3 content, with d31 = 37 pm/V in 20/80 (w/w%) BaTiO3/PHB. 3D printing was used to produce porous cubic-shaped scaffolds using a 90° lay-down pattern, with pore size ranging in 0.60-0.77 mm and good mechanical stability. Biodegradation tests conducted for 8 weeks in saline solution at 37 °C showed low mass loss (∼4%) for 3D printed scaffolds. The results obtained in terms of piezoelectric, mechanical and chemical properties of the nanocomposite provide a new promising strategy for vascularized bone tissue engineering.

Development of Poly(methyl methacrylate)/nano-hydroxyapatite (PMMA/nHA) Nanofibers for Tissue Engineering Regeneration Using an Electrospinning Technique.

The study explores the in vitro biocompatibility and osteoconductivity of poly(methyl methacrylate)/nano-hydroxyapatite (PMMA/nHA) composite nanofibrous scaffolds for bone tissue engineering (BTE). Electrospun scaffolds, exhibiting both low and high fiber orientation, were investigated. The inclusion of hydroxyapatite nanoparticles enhances the osteoconductivity of the scaffolds while maintaining the ease of fabrication through electrospinning. SEM analysis confirms the high-quality morphology of the scaffolds, with successful incorporation of nHA evidenced by SEM-EDS and FTIR methods. DSC analysis indicates that nHA addition increases the PMMA glass transition temperature (Tg) and reduces stress relaxation during electrospinning. Furthermore, higher fiber orientation affects PMMA Tg and stress relaxation differently. Biological studies demonstrate the composite material's non-toxicity, excellent osteoblast viability, attachment, spreading, and proliferation. Overall, PMMA/nHA composite scaffolds show promise for BTE applications.

Biomimetic highly porous nanocellulose–nanohydroxyapatite scaffolds for bone tissue engineering

Wood-derived TEMPO-oxidized cellulose nanofibrils (CNFs) have potential as scaffolding for bone tissue engineering. Although biocompatible, the material lacks osteoconductive and appropriate mechanical properties. Incorporation of nano-hydroxyapatite (nHA) and modification of scaffold preparation methods could improve applicability. In this study, freeze-dried porous scaffolds were prepared using a range of nHA (0, 20, 33, 50%) and CNF compositions. Not only the microarchitecture but also the chemical composition of the scaffolds was studied. Osteoblast-like osteosarcoma derived cells (Saos-2) were cultured on the scaffolds and their responses (viability, attachment, proliferation, and osteogenic phenotype) to the different scaffolds were documented. The results show that incorporation of nHA influenced the microarchitecture, mechanical stiffness and surface properties of the scaffolds. Moreover, biological characterization demonstrated good cell viability in all the groups. However, the increase of nHA concentration beyond 20% does not offer further advantages. It is concluded that the incorporation of 20% nHA resulted in the widest and most biomimetic pore size distribution, increased surface roughness and improved protein adsorption. These changes in material properties enhanced cell spreading and the osteogenic gene expression of osteoblast-like cells seeded on the scaffolds. Moreover, 20% nHA warrants further investigation as a potential scaffolding material for bone tissue engineering.Graphical abstract

An Overview of PRP-Delivering Scaffolds for Bone and Cartilage Tissue Engineering

An Overview of PRP-Delivering Scaffolds for Bone and Cartilage Tissue Engineering

Biomimetic short fiber reinforced 3-dimensional scaffold for bone tissue regeneration

Bone defects caused by diseases and trauma are considered serious clinical challenges. Autologous and allogeneic transplantations are the most widely used methods to mitigate bone defects. However, transplantation poses risks such as secondary trauma, immune rejection, and disease transmission to patients. Preparing a biologically active bone tissue engineering scaffold as a bone substitute can overcome this problem. In the current study, a PLGA/gelatin (Gel) short fiber-reinforced composite three-dimensional (3D) scaffold was fabricated by electrospinning for bone tissue defect repair. A hybrid scaffold adding inorganic materials hydrotalcite (CaAl-LDH) and osteogenic factors deferoxamine (DFO) based on PLGA and Gel composite filaments was prepared. The structure, swelling, drug release, and compressive resilience performance of the 3D scaffolds in a wet state were characterized and the osteogenic effect of the crosslinked scaffold (C-DLPG) was also investigated. The scaffold has shown the optimum physicochemical attributes which still has 380 kPa stress after a 60% compression cycle and sustainedly released the drug for about twenty days. Moreover, a promising In vivo osteogenic performance was noted with better tissue organization. At 8 weeks after implantation, the C-DLPG scaffold could fill the bone defect site, and the new bone area reached 19 mm2. The 3D microfiber scaffold, in this study, is expected to be a promising candidate for the treatment of bone defects in the future.

3D printing of personalized magnesium composite bone tissue engineering scaffold for bone and angiogenesis regeneration

Critical-size trabecular bone defects remain challenging to treat in orthopedic clinical practice. This study utilized a polyethylene glycol dispersion method to uniformly disperse magnesium (Mg) and nano-hydroxyapatite (n-HA) in a polylactic acid (PLA) solution, resulting in the fabrication of an Mg/n-HA/PLA composite material. We next generated personalized bone repair scaffolds through Fused Deposition Modeling (FDM) 3D printing. The composite scaffolds were characterized, and their biocompatibility, osteogenic properties, and angiogenic capabilities were assessed through in vitro experiments. In vivo experiments were conducted to explore the pathways underlying osteogenesis and angiogenesis. The results confirmed that the properties and biological efficacy of the Mg composite material could be regulated by controlling the quantitative ratio of Mg. The results showed that the 10 % Mg composite group exhibited optimal osteogenic properties, whereas the 20 % Mg composite group showed the best angiogenic effects and the most promising induction properties. The beneficial effect of the composite scaffold was associated with the interconnected REK and FAK/HIF-1/VEGF signaling pathways. In conclusion, the Mg composite biomaterial exhibited desirable processability, mechanical properties, and degradability, and induced osteogenesis and angiogenesis. These features of composite scaffold meet the complex requirements for treating critical-size trabecular bone defects in load-bearing animals and having potential for clinical development and application.

Integrated GelMA and interleukin 8-loaded liposome composite scaffold for endogenous BMSCs recruitment in bone repair

Bone repair strategies, based on endogenous stem cell recruitment, can effectively avoid immune rejection and the low utilization of exogenous stem cells. Endogenous stem cells can be recruited to the implantation site by loading chemokines onto bone tissue-engineered scaffolds. However, challenges such as unstable chemokine activity and easy inactivation after implantation remain significant. In the present study, composite fiber scaffolds ((IL8@LIP)-GelMA) consisting of Interleukin 8 (IL8) -loaded liposomes and GelMA were constructed by electrospinning and photocrosslinking, and its ability to recruit bone marrow-derived mesenchymal stem cells (BMSCs) and immunomodulatory effect was investigated. Compared to GelMA loaded directly with IL8, scaffolds of (IL8@LIP)-GelMA demonstrated superior protection of IL8 activity, ensuring a slow and continuous release. Both in vivo and in vitro experiments demonstrated that the (IL8@LIP)-GelMA scaffolds effectively recruited BMSCs to the desired sites. Additionally, the (IL8@LIP)-GelMA scaffolds exhibited the capacity to recruit more macrophages to the implantation site. Importantly, they promoted the polarization of macrophages toward the M2 anti-inflammatory phenotype, facilitating the transition from the inflammatory stage to the tissue repair stage. Therefore, (IL8@LIP)-GelMA scaffolds show great potential for cell-free tissue engineering applications and provide insights into the loading mode of growth factors in scaffolds.

Chitosan and Sodium Hyaluronate Hydrogels Supplemented with Bioglass for Bone Tissue Engineering.

The aim of the study was to produce biocomposites based on chitosan and sodium hyaluronate hydrogels supplemented with bioglasses obtained under different conditions (temperature, time) and to perform an in vitro evaluation of their cytocompatibility using both indirect and direct methods. Furthermore, the release of ions from the composites and the microstructure of the biocomposites before and after incubation in simulated body fluid were assessed. Tests on extracts from bioglasses and hydrogel biocomposites were performed on A549 epithelial cells, while MG63 osteoblast-like cells were tested in direct contact with the developed biomaterials. The immune response induced by the biomaterials was also evaluated. The experiments were carried out on both unstimulated and lipopolysaccharide (LPS) endotoxin-stimulated human peripheral blood cells in the presence of extracts of the biocomposites and their components. Extracts of the materials produced do not exhibit toxic effects on A549 cells, and do not increase the production of proinflammatory cytokines tumour necrosis factor alpha (TNF-α) and interleukin (IL-6) by blood cells in vitro. In direct contact with MG63 osteoblast-like cells, biocomposites containing the reference bioglass and those containing SrO are more cytocompatible than biocomposites with ZnO-doped bioglass. Using two testing approaches, the effects both of the potentially toxic agents released and of the surface of the tested materials on the cell condition were assessed. The results pave the way for the development of highly porous hydrogel-bioglass composite scaffolds for bone tissue engineering.

Baghdadite reinforced polycaprolactone scaffold for bone tissue engineering

Baghdadite reinforced polycaprolactone scaffold for bone tissue engineering

The effects of gellan gum concentration on electrospinning and degradation of flexible, crosslinker-free scaffolds for bone tissue engineering

Low acyl type gellan gum (GG) is a biocompatible gelling agent with lower degradation rates compared to its high acyl counterpart. This study investigated the hypothesis whether the incorporation of various low acyl GG concentrations into a constant concentration of poly(vinyl alcohol) (PVA) would facilitate the electrospinning towards the production of stable nanofibrous PVA-GG membranes, and how thermal treatment would affect the degradation rate of the membranes rendering them suitable as flexible scaffolds for bone tissue engineering and avoiding crosslinking agents. All compositions displayed fiber diameters ranging from 70 to 200 nm. Thermally treated membranes indicated a mass loss of 20–32 %, while non-treated ones 32–54 %, with the higher GG concentrations exhibiting lower degradation rates, and swelling capacity of at least 500 %. Rheological analysis illustrated differences in gelling capacity, ranging from fluid-like to critical gelation state with increasing GG content, with G′ values ranging between 3.5 ± 0.5 Pa for the lowest and 23.4 ± 1.5 for the highest GG concentration. Proliferation of strongly adhered pre-osteoblasts significantly increased over culture time. Osteogenic markers including alkaline phosphatase activity and calcium deposition were significantly upregulated compared to the control, and calcium secretion gradually increased up to three weeks, validating the capacity of the scaffolds to support osteogenesis.

Preparation of PDA-GO/CS composite scaffold and its effects on the biological properties of human dental pulp stem cells

Reduced graphene oxide (rGO) is an graphene oxide (GO) derivative of graphene, which has a large specific surface area and exhibited satisfactory physicochemical characteristics. In this experiment, GO was reduced by PDA to generate PDA-GO complex, and then PDA-GO was combined with Chitosan (CS) to synthesize PDA-GO/CS composite scaffold. PDA-GO was added to CS to improve the degradation rate of CS, and it was hoped that PDA-GO/CS composite scaffolds could be used in bone tissue engineering. Physicochemical and antimicrobial properties of the different composite scaffolds were examined to find the optimal mass fraction. Besides, we examined the scaffold’s biocompatibility by Phalloidin staining and Live and Dead fluorescent staining.Finally, we applied ALP staining, RT-qPCR, and Alizarin red S staining to detect the effect of PDA-GO/CS on the osteogenic differentiation of human dental pulp stem cells (hDPSCs). The results showed that PDA-GO composite was successfully prepared and PDA-GO/CS composite scaffold was synthesized by combining PDA-GO with CS. Among them, 0.3%PDA-GO/CS scaffolds improves the antibacterial activity and hydrophilicity of CS, while reducing the degradation rate. In vitro, PDA-GO/CS has superior biocompatibility and enhances the early proliferation, migration and osteogenic differentiation of hDPSCs. In conclusion, PDA-GO/CS is a new scaffold materialsuitable for cell culture and has promising application prospect as scaffold for bone tissue engineering.

Characterization of PVA/Chitosan and Tuna Fish Bones CHA Scaffold for Bone Tissue Engineering

Bone tissue engineering has been used in the biomedical field to treat bone defects by implanting scaffolds into bone tissue. However, the currently developed scaffold still needs to be developed to obtain scaffold building materials with good compatible properties and can regenerate damaged bone cells. This study combines PVA/Chitosan polymer with CHA of tuna bone using the porogen leaching method at a calcination temperature of 100°C for 12 hours. The purpose of this study was to determine the physicochemical properties by characterizing XRD, SEM-EDX, FTIR, and the porosity of the scaffold. The results obtained from the results of the PVA/Chitosan/CHA XRD patterns are the formation of the PVA/Chitosan phase at 2θ(°)=19.68, the IR spectrum of the 43−group band and 2 stretching, the ratio mol Ca/P is 1.98, the pore diameter is 1.561 ± 0.07 μm and the porosity is 55.04%. These results indicate that the PVA/Chitosan/CHA scaffold is an amorphous calcium phosphate (ACP) that has the potential for bone tissue engineering.

Additive Manufacturing of Iron Carbide Incorporated Bioactive Glass Scaffolds for Bone Tissue Engineering and Drug Delivery Applications.

In this study, we have synthesized a bioactive glass with composition 45SiO2-20Na2O-23CaO-6P2O5-2.5B2O3-1ZnO-2MgO-0.5CaF2 (wt %). Further, it has been incorporated with 0.4 wt % iron carbide nanoparticles to prepare magnetic bioactive glass (MBG) with good heat generation capability for potential applications in magnetic field-assisted hyperthermia. The MBG scaffolds have been fabricated using extrusion-based additive manufacturing by mixing MBG powder with 25% Pluronic F-127 solution as the binder. The saturation magnetization of iron carbide nanoparticles in the bioactive glass matrix has been found to be 80 emu/g. The morphological analysis (pore size distribution, porosity, open pore network modeling, tortuosity, and pore interconnectivity) was done using an in-house developed methodology that revealed the suitability of the scaffolds for bone tissue engineering. The compressive strength (14.3 ± 1.6 MPa) of the MBG scaffold was within the range of trabecular bone. The in vitro test using simulated body fluid (SBF) showed the formation of apatite indicating the bioactive nature of scaffolds. Further, the drug delivery behaviors of uncoated and polycaprolactone (PCL) coated MBG scaffolds have been evaluated by loading an anticancer drug (Mitomycin C) onto the scaffolds. While the uncoated scaffold demonstrated the drug's burst release for the initial 80 h, the PCL-coated scaffold showed the gradual release of the drug. These results demonstrate the potential of the proposed MBG for bone tissue engineering and drug delivery applications.

Gelatin-coated mesoporous forsterite scaffold for bone tissue engineering

This study aims to develop a mesoporous forsterite spheres-based scaffold for bone tissue regeneration. To achieve this goal, mesoporous forsterite spheres were fabricated using alginate (gel-forming agent) and activated charcoal (porogen). The impact of carbon concentration (2, 5, 10, and 20 wt %) and sintering temperature (1100 and 1200 °C) on the structural properties of mesoporous forsterite spheres was investigated. Additionally, gelatin coatings were applied to modify these spheres. Forsterite microspheres with a particle size of 2.43 ± 0.22 mm were successfully produced, exhibiting varying pore sizes based on the sintering temperature and carbon content. Notably, mesoporous forsterite spheres synthesized using 5 wt% carbon and sintered at 1200 °C displayed uniform morphology, a minor average diameter (2.4 ± 0.3 mm(, and an average pore size of 2.7 ± 0.9 μm. These optimized forsterite spheres exhibited mesoporous structures with superior surface area (2.93 m2g-1) and pore volume (0.009–0.048 cm3g-1). Furthermore, the gelatin coating, with an average thickness of 160 μm, was effectively applied to the forsterite spheres. The gelatin coating reduced the surface area (1.40 m2g-1), pore volume (0.003 cm3g-1), and average pore diameter to 9.26 nm, maintaining the mesoporous structure. Both mesoporous forsterite spheres successfully induced bone-like apatite formation in vitro during a 21-day immersion in simulated body fluid. Moreover, while both forsterite-based spheres exhibited cytocompatibility with MG63 cells (cell viability >80 %), the gelatin coating significantly enhanced osteogenic differentiation (1.29 times). In conclusion, gelatin-coated mesoporous forsterite spheres exhibit promising potential as bioactive filling scaffolds for bone tissue regeneration.

Biomimetic mineralization of platelet lysate/oxidized dextran cryogel as a macroporous 3D composite scaffold for bone repair

Scaffold development approaches using autologous sources for tissue repair are of great importance in obtaining bio-active/-compatible constructs. Platelet-rich plasma (PRP) containing various growth factors and platelet lysate (PL) derived from PRP are autologous products that have the potential to accelerate the tissue repair response by inducing a transient inflammatory event. Considering the regenerative capacity of PRP and PL, PRP/PL-based scaffolds are thought to hold great promise for tissue engineering as a natural source of autologous growth factors and a provider of mechanical support for cells. Here, a bio-mineralized PRP-based scaffold was developed using oxidized dextran (OD) and evaluated for future application in bone tissue engineering. Prepared PL/OD scaffolds were incubated in simulated body fluid (SBF) for 7, 14 and 21 d periods. Mineralized PL/OD scaffolds were characterized using Fourier transform infrared spectroscopy, x-ray diffraction spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis, porosity and compression tests. SEM and energy-dispersive x-ray spectroscopy analyses revealed mineral accumulation on the PL/OD scaffold as a result of SBF incubation. In vitro cytotoxicity and in vitro hemolysis tests revealed that the scaffolds were non-toxic and hemocompatible. Additionally, human osteoblasts (hOBs) exhibited good attachment and spreading behavior on the scaffolds and maintained their viability throughout the culture period. The alkaline phosphatase activity assay and calcium release results revealed that PL/OD scaffolds preserved the osteogenic properties of hOBs. Overall, findings suggest that mineralized PL/OD scaffold may be a promising scaffold for bone tissue engineering.

Ca-AlN MOFs-loaded chitosan/gelatin scaffolds; a dual-delivery system for bone tissue engineering applications

Creating a scaffold for bone tissue engineering that is bioactive and capable of acting as a local-dual delivery system, releasing bioactive molecules and regulating the bone remodeling process to achieve balanced bone resorption and formation, is a significant challenge. The objective of this research is to create a composite scaffold using chitosan/gelatin (CHS/Gel) and the calcium (Ca)-alendronate (ALN) metal–organic frameworks (MOFs). The scaffold will act as a dual-delivery system, releasing Ca ions and ALN to regulate bone formation. Ca-ALN MOF nanoparticles (NPs) were prepared in mild conditions and studied by FTIR, XRD, FESEM, and TGA. Ca-ALN NPs-loaded CHS/Gel scaffolds were opportunely fabricated through freeze-drying approach. Physicochemical features of the scaffolds after incorporating NPs equated by CHS/Gel scaffold changed, therefore, the attendance of NPs caused a decreasing porosity, decreased swelling, and low rate of degradation. The release profile results showed that the NPs-loaded CHS/Gel scaffolds were able to simultaneously release ALN and Ca ions due to the decomposition of NPs. Additionally, the loading of NPs in the CHS/Gel scaffold led to an increment in alkaline phosphatase (ALP) activity and the quantity of deposited Ca along with osteogenesis gene markers. These findings suggest that the NPs-loaded CHS/Gel scaffold has the potential to enhance the differentiation of human adipose tissue-derived mesenchymal stem cells, making it a promising approach for bone repair.

Sand casting-inspired surface modification of 3D-printed porous polyetheretherketone scaffolds for enhancing osteogenesis

3D-printed polyetheretherketone (PEEK) scaffolds are developed as novel bone substitutes, however, their bioinert surface hinders osteogenesis and modifying PEEK scaffolds without blocking their inter-connected porous structure is challenged. In this study, 45S5 bioactive glasses (BG) were homogeneously coated on PEEK scaffolds inspired by traditional sand-casting. The structure of PEEK scaffolds was preserved under shaping effect of BG fillers. Modulus, coating yield and hydrophilicity of scaffolds after different thermal treatment time were comparatively investigated. Excellent hydroxyapatite-forming ability of BG-coated scaffolds was confirmed by mineralization study. In-vitro assessments, BG-coated scaffolds cultured with MC3T3-E1 cells presented potential as bone implants with excellent cytocompatibility and osteogenic properties. Following similar coating strategy, conductive particles, multi-component particles and template particles were also coated on PEEK surface. The proposed methodology highlights a useful approach towards producing tunable biomedical coatings and microstructure on porous PEEK scaffolds for bone tissue engineering.

Biomimetic mineralization of 3D-printed polyhydroxyalkanoate-based microbial scaffolds for bone tissue engineering

Polyhydroxyalkanoates (PHAs) have gained much attention as a potential alternative to conventional plastic bone scaffolds due to their biocompatibility and biodegradability, among a diverse range of advantageous properties. However, the water resistance of PHA creates an environment that can interfere with cell interactions. In this study, a three-dimensional-printed PHA scaffold was fabricated through fused deposition modeling printing considering the physical properties of PHA. The PHA bone scaffolds were then coated with polydopamine (pDA) and/or hydroxyapatite (HA) in various configurations using a relatively simple and rapid process involving only immersion. The PHA–pDA– HA scaffold showed enhanced cell viability, proliferation, and differentiation, and could thus serve as a versatile platform for bone tissue engineering applications.