Bone Morphogenetic Protein-2 Loading Research Articles

Use of biosilica to improve loading and delivery of bone morphogenic protein 2

The clinical utility of bone morphogenetic protein 2 (BMP2) is limited because of the poor attraction between BMP2 and carriers, resulting in low loading efficiency and initial burst release. Here, the high binding affinity of BMP2 to the biosilica surface was utilized to overcome this limitation. Atomic force microscopy revealed that BMP2 bound nearly 8- and 2-fold more strongly to biosilica-coated hydroxyapatite than to uncoated and plain silica-coated hydroxyapatite, respectively. To achieve controlled release, collagen was introduced between the silica layers on hydroxyapatite, which was optimized by adjusting the collagen concentration and number of layers. The optimal biosilica/collagen formulation induced sustained BMP2 release without compromising loading efficiency. BMP2 combined with the mentioned formulation led to an increase in osteogenesis, as compared to the combination of BMP2 with either biosilica-coated or non-coated hydroxyapatite in vitro. In rat calvarial defect models, the biosilica/collagen-coated hydroxyapatite with 1 μg BMP2 showed 26 % more bone regeneration than the same dose of BMP2-loaded hydroxyapatite and 10.6 % more than hydroxyapatite with 2.5-fold dose of BMP2. Using BMP2 affinity carriers coated with biosilica/collagen allows for more efficacious in situ loading and delivery of BMP2, making them suitable for the clinical application of growth factors through a soaking method.

Sequential deacetylation/self-gelling chitin hydrogels and scaffolds functionalized with fucoidan for enhanced BMP-2 loading and sustained release

Bone morphogenetic protein 2 (BMP-2) is a potent osteoinductive factor that promotes bone formation. A major obstacle to the clinical application of BMP-2 is its inherent instability and complications caused by its rapid release from implants. Chitin based materials have excellent biocompatibility and mechanical properties, making them ideal for bone tissue engineering applications. In this study, a simple and easy method was developed to spontaneously form deacetylated β-chitin (DAC-β-chitin) gels at room temperature through a sequential deacetylation/self-gelation process. The structural transformation of β-chitin to DAC-β-chitin leads to the formation of self-gelling DAC-β-chitin, from which hydrogels and scaffolds were prepared. Gelatin (GLT) accelerated the self-gelation of DAC-β-chitin and increased the pore size and porosity of the DAC-β-chitin scaffold. The DAC-β-chitin scaffolds were then functionalized with a BMP-2-binding sulfate polysaccharide, fucoidan (FD). Compared with β-chitin scaffolds, FD-functionalized DAC-β-chitin scaffolds showed higher BMP-2 loading capacity and more sustainable release of BMP-2, and thus had better osteogenic activity for bone regeneration.

Polymer Texture Influences Cell Responses in Osteogenic Microparticles.

Polymer materials used in medical devices and treatments invariably encounter cellular networks. For the device to succeed in tissue engineering applications, the polymer must promote cellular interactions through adhesion and proliferation. To predict how a polymer will behave in vitro, these material-cell interactions need to be well understood. To study polymer structure-property relationships, microparticles of four chemically distinct tyrosol-derived poly(ester-arylate) polymers and a commercially available poly(lactic acid-co-glycolic acid) (PLGA) copolymer were prepared and their interactions with cells investigated. Cell loading concentration was optimized and cell adhesion and proliferation evaluated. Particles were also tested for their ability to adsorb bone morphogenetic protein-2 (BMP-2) and differentiate a myoblast cell line towards an osteoblast lineage through BMP-2 loading and release. While cell adhesion was observed on all particles after 24 h of incubation, the highest degree of cell adhesion occurred on polymers with smaller crystallites. At longer incubation times, cells proliferated on all particle formulations, regardless of the differences in polymer properties. High BMP-2 loading was achieved for all particle formulations and all formulations showed a burst release. Even with the burst release, cells cultured on all formulations showed an upregulation in alkaline phosphatase (ALP) activity, a measure of osteoblast differentiation. As with cell adhesion, the polymer with the smaller crystallite showed the most ALP activity. We suggest that smaller crystallites serve as a proxy for topographical roughness to elicit the observed responses from cells. Furthermore, we have drawn a correlation between the polymer crystallite with the hydration potential using surface analysis techniques. The online version contains supplementary material available at 10.1007/s12195-022-00729-9.

Bone Regeneration in Osteoporosis via Carbon Nanotube-Based Bone Morphogenetic Protein-2

We constructed a bone morphogenetic protein 2 (BMP-2)@Carbon nanotube (CNT) delivery system to explore the feasibility of a nanodrug delivery system in the treatment of osteoporosis (OP). Osteoblasts were cultured and OP mouse models were constructed to evaluate the osteogenesis of nano-BMP-2 in OP therapy. In physicochemical property tests, we found that BMP-2 was effectively loaded into CNT to form nanoparticles (NPs) with a particle size of 100 nm. Additionally, we found that nano-BMP-2 had good stability and could effectively prolong BMP-2 release time. In cellular experiments, we found that nano-BMP-2 could penetrate osteoblasts more effectively than BMP-2 alone, and with the increase of BMP-2 loading, the amount of BMP-2 penetrating osteoblasts increased with an optimal loading of 100 μg. We determined that nano-BMP-2 could increase proliferation activity of osteoblasts to better promote OP repair. In our vivo experiments, we found that nano-BMP-2 was effectively excreted through the kidney and mainly distributed in bone tissue. Moreover, CNT effectively prolonged the half-life of BMP-2 and was safe to introduce through intramuscular injection and did not cause obvious inflammatory reactions. Following treatment, nano-BMP-2 increased body weight, femur weight, and femoral head diameter in OP mouse models. Furthermore, bone trabecular was arranged in a close and orderly fashion and was uniform in thickness in OP mice treated with nano-BMP-2. OP mice had improved bone mineral density, trabecular thickness, trabecular number, and cortical bone thickness in their metaphyseal regions, implying nano-BMP-2 treatment led to improved OP symptoms. Therefore, BMP-2@CNT may be a beneficial choice for treatment of OP.

Combining a Vascular Bundle and 3D Printed Scaffold with BMP-2 Improves Bone Repair and Angiogenesis.

Vascularization is currently considered the biggest challenge in bone tissue engineering due to necrosis in the center of large scaffolds. We established a new expendable vascular bundle model to vascularize a three-dimensional printed channeled scaffold with and without bone morphogenetic protein-2 (BMP-2) for improved healing of large segmental bone defects. Bone formation and angiogenesis in an 8 mm critical-sized bone defect in the rat femur were significantly promoted by inserting a bundle consisting of the superficial epigastric artery and vein into the central channel of a large porous polycaprolactone scaffold. Vessels were observed sprouting from the vascular bundle inserted in the central tunnel. Although the regenerated bone volume in the group receiving the scaffold and vascular bundle was similar to that of the healthy femur, the rate of union of the group was not satisfactory (25% at 8 weeks). BMP-2 delivery was found to promote not only bone formation but also angiogenesis in the critical-sized bone defects. Both insertion of the vascular bundle alone and BMP-2 loading alone induced comparable levels of angiogenesis and when used in combination, significantly greater vascular volume was observed. These findings suggest a promising new modality of treatment in large bone defects. Level of Evidence: Therapeutic level I. Impact statement Vascularization is currently the main challenge in bone tissue engineering. The combination of a vascular bundle and an osteoinductive three-dimensional printed graft significantly improved and accelerated bone regeneration and angiogenesis in critical-sized large bone defects, suggesting a promising new modality of treatment in large bone defects.

Regenerating Critical Size Rat Segmental Bone Defects with a Self-Healing Hybrid Nanocomposite Hydrogel: Effect of Bone Condition and BMP-2 Incorporation.

The aim of the current study is to assess the biological performance of self-healing hydrogels based on calcium phosphate (CaP) nanoparticles and bisphosphonate (BP) conjugated hyaluronan (HA) in a critical size segmental femoral bone defect model in rats. Additionally, these hydrogels are loaded with bone morphogenetic protein 2 (BMP-2) and their performance is compared in healthy and osteoporotic bone conditions. Treatment groups comprise internal plate fixation and placement of a PTFE tube containing hydrogel (HABP -CaP) or hydrogel loaded with BMP-2 in two dosages (HABP -CaP-lowBMP2 or HABP -CaP-highBMP2). Twelve weeks after bone defect surgery, bone formation is analyzed by X-ray examination, micro-CT analysis, and histomorphometry. The data show that critical size, segmental femoral bone defects cannot be healed with HABP -CaP gel alone. Loading of the HABP -CaP gel with low dose BMP-2 significantly improve bone formation and resulted in defect bridging in 100% of the defects. Alternatively, high dose BMP-2 loading of the HABP -CaP gel does not improve bone formation within the defect area, but leads to excessive bone formation outside the defect area. Bone defect healing is not affected by osteoporotic bone conditions.

Programmed BMP-2 release from biphasic calcium phosphates for optimal bone regeneration

This study aimed to fabricate a multi-layered biphasic calcium phosphate (BCP) platform for programmed bone morphogenetic protein-2 (BMP-2) release, which means to block the initial burst release and promote releasing during the differentiation phase of osteogenic cells. And it is to confirm in vivo whether this platform has osteogenic inductivity even when extremely low doses of BMP-2 are loaded compared to the conventional soaking method. Our strategy consisted of preparing a multilayer coating on BCP to minimize the contact between BMP-2 and BCP and allow the loading of BMP-2. The multilayer, which is surface-modified on BCP, is composed of an organosilicate and a natural polymer-based layer-by-layer (LbL) film. We applied (3-Aminopropyl)triethoxysilane (APTES) as an organosilicate was used for amine-functionalized BCP and (collagen/heparin)5 film was used to delay and sustain BMP-2 release. The coated multilayer not only reduced the initial burst release by more than 50% but also loaded more BMP-2. For in vivo experiment, histomorphometric analysis, it was observed that the BCP platform loaded with extremely low concentration BMP-2 (0.01 mg/ml) induced a significantly larger amount of new bones at 8 weeks compared to the conventional soaking method in the rabbit calvarium onlay graft model.

Osseointegration evaluation of UHMWPE and PEEK-based scaffolds with BMP-2 using model of critical-size cranial defect in mice and push-out test

It the present study the push-out mechanical test was adopted for mouse model of implantation in critical-size cranial defects to evaluate the effectiveness of implant-skull fusion. As implants, disks of porous ultra-high molecular weight polyethylene (UHMWPE) and polyetheretherketone (PEEK) with hydroxylapatite (HA) with and without loading of recombinant bone morphogenetic protein-2 (BMP-2) were used. Implantation results were evaluated using histology and micro-computed tomography (micro-CT). In the case of both UHMWPE/HA and PEEK/HA, BMP-2 loading resulted in a significant increase in the amount of bone tissue in the implantation area, especially at the edges of the defect, and an increase in the value of BV/TV (bone volume/tissue volume) during micro-CT. There was a high correlation of BV/TV values with the maximum load and elastic modulus measured during the puch-out test. The maximum load values showed good convergence within the groups and are comparable to the maximum load values obtained by other authors in the rat model of implantation in critical-size cranial defects. An adapted push-out test can be used to evaluate the quality of osseointegration of the implanted materials.

Bioinspired Functional Black Phosphorus Electrospun Fibers Achieving Recruitment and Biomineralization for Staged Bone Regeneration.

The ideal bone repair material should firstly recognize and recruit osteoblast precursor cells to initiate the repair process, then promote the differentiation of osteoblasts and accelerate the mineralization of the extracellular matrix (ECM). Here, a bioinspired staged bone regeneration strategy which loads bone morphogenetic protein2 (BMP2 )-modified black phosphorus (BP@BMP2 ) nanosheets to a polylactic acid (PLLA) electrospun fibrous scaffold, with a combination of recruiting osteoblast precursor cells and biomineralization properties for bone regeneration, is constructed successfully by micro-sol electrospinning technique. BP, acting as carriers, can not only provide a negative surface and a strong BMP2 loading ability but can also promote biomineralization in a 3D manner on the electrospun fibrous scaffold, while the BMP2 is to target osteoblast precursor cells for recruitment and osteogenesis differentiation, which endows BP@BMP2 nanosheets with staged bone regeneration ability. Furthermore, the in vitro and in vivo data showed that the BP@BMP2 loaded electrospun fibrous scaffold have good biocompatibility and a strong osteogenesis ability resulting in rapid new bone tissue regeneration. Altogether, this newly developed bioinspired BMP2 -modified BP electrospun fiber with staged bone regeneration properties via recruiting osteoblast precursor cells to the bone injured site and accelerating biomineralization can be a promising approach in physiologic bone repair.

Highly porous PEEK and PEEK/HA scaffolds with Escherichia coli-derived recombinant BMP-2 and erythropoietin for enhanced osteogenesis and angiogenesis

The present study reports the results of structural and mechanical analysis, as well as proteins release kinetics and osteointegration in mice craniotomy model of highly porous PEEK (PolyEther Ether Ketone) and PEEK/HA (PolyEther Ether Ketone/HydroxyApatite) biomimetic scaffolds loaded with Escherichia coli-derived recombinant Bone Morphogenetic Protein-2 (BMP-2) and ErythroPOietin (EPO). Porous scaffolds were obtained by thermopressing with NaCl as a pore-forming filler. Two fractions of pore-forming filler were used to imitate natural trabecular bone tissue by making a preferential porosity using large fraction and creating an extended surface and special microrelief using small fraction. Hydroxyapatite (HA) was added up to 20% to activate bioinert PEEK providing loading of recombinant growth factors and osteointegration as well as sufficient level of mechanical properties imitating human trabecular bone. Unexpectedly, the non-activated PEEK produced by our technology was also able to spontaneously bind both BMP-2 and EPO. Loading of both BMP-2 and EPO to both types of implants resulted in enhanced neoosteogenesis and angiogenesis in a critical-size cranial defect model in mice in 3–6 weeks. Considering good mechanical characteristics and excellent osteoinductive and angiogenic properties, both materials in combination with BMP-2 and EPO can find their application in regenerative medicine.

Biocompatible PLGA-Mesoporous Silicon Microspheres for the Controlled Release of BMP-2 for Bone Augmentation.

Bone morphogenetic protein-2 (BMP-2) has been demonstrated to be one of the most vital osteogenic factors for bone augmentation. However, its uncontrolled administration has been associated with catastrophic side effects, which compromised its clinical use. To overcome these limitations, we aimed at developing a safer controlled and sustained release of BMP-2, utilizing poly(lactic-co-glycolic acid)-multistage vector composite microspheres (PLGA-MSV). The loading and release of BMP-2 from PLGA-MSV and its osteogenic potential in vitro and in vivo was evaluated. BMP-2 in vitro release kinetics was assessed by ELISA assay. It was found that PLGA-MSV achieved a longer and sustained release of BMP-2. Cell cytotoxicity and differentiation were evaluated in vitro by MTT and alkaline phosphatase (ALP) activity assays, respectively, with rat mesenchymal stem cells. The MTT results confirmed that PLGA-MSVs were not toxic to cells. ALP test demonstrated that the bioactivity of BMP-2 released from the PLGA-MSV was preserved, as it allowed for the osteogenic differentiation of rat mesenchymal stem cells, in vitro. The biocompatible, biodegradable, and osteogenic PLGA-MSVs system could be an ideal candidate for the safe use of BMP-2 in orthopedic tissue engineering applications.

Magnesium hydroxide-incorporated PLGA composite attenuates inflammation and promotes BMP2-induced bone formation in spinal fusion

Spinal fusion has become a common surgical technique to join two or more vertebrae to stabilize a damaged spine; however, the rate of pseudarthrosis (failure of fusion) is still high. To minimize pseudarthrosis, bone morphogenetic protein-2 (BMP2) has been approved for use in humans. In this study, we developed a poly(lactide-co-glycolide) (PLGA) composite incorporated with magnesium hydroxide (MH) nanoparticles for the delivery of BMP2. This study aimed to evaluate the effects of released BMP2 from BMP2-immobilized PLGA/MH composite scaffold in an in vitro test and an in vivo mice spinal fusion model. The PLGA/MH composite films were fabricated via solvent casting technique. The surface of the PLGA/MH composite scaffold was modified with polydopamine (PDA) to effectively immobilize BMP2 on the PLGA/MH composite scaffold. Analyzes of the scaffold revealed that using PLGA/MH-PDA improved hydrophilicity, degradation performance, neutralization effects, and increased BMP2 loading efficiency. In addition, releasing BMP2 from the PLGA/MH scaffold significantly promoted the proliferation and osteogenic differentiation of MC3T3-E1 cells. Furthermore, the pH neutralization effect significantly increased in MC3T3-E1 cells cultured on the BMP2-immobilized PLGA/MH scaffold. In our animal study, the PLGA/MH scaffold as a BMP2 carrier attenuates inflammatory responses and promotes BMP2-induced bone formation in posterolateral spinal fusion model. These results collectively demonstrate that the BMP2-immobilized PLGA/MH scaffold offers great potential in effectively inducing bone formation in spinal fusion surgery.

Development of mussel-inspired 3D-printed poly (lactic acid) scaffold grafted with bone morphogenetic protein-2 for stimulating osteogenesis

3D printing is a versatile technique widely applied in tissue engineering due to its ability to manufacture large quantities of scaffolds or constructs with various desired architectures. In this study, we demonstrated that poly (lactic acid) (PLA) scaffolds fabricated via fused deposition not only retained the original interconnected microporous architectures, the scaffolds also exhibited lower lactic acid dissolution as compared to the freeze-PLA scaffold. The 3D-printed scaffolds were then grafted with human bone morphogenetic protein-2 (BMP-2) via the actions of polydopamine (PDA) coatings. The loading and release rate of BMP-2 were monitored for a period of 35 days. Cellular behaviors and osteogenic activities of co-cultured human mesenchymal stem cells (hMSCs) were assessed to determine for efficacies of scaffolds. In addition, we demonstrated that our fabricated scaffolds were homogenously coated with PDA and well grafted with BMP-2 (219.1 ± 20.4 ng) when treated with 250 ng/mL of BMP-2 and 741.4 ± 127.3 ng when treated with 1000 ng/mL of BMP-2. This grafting enables BMP-2 to be released in a sustained profile. From the osteogenic assay, it was shown that the ALP activity and osteocalcin of hMSCs cultured on BMP-2/PDA/PLA were significantly higher when compared with PLA and PDA/PLA scaffolds. The methodology of PDA coating employed in this study can be used as a simple model to immobilize multiple growth factors onto different 3D-printed scaffold substrates. Therefore, there is potential for generation of scaffolds with different unique modifications with different capabilities in regulating physiochemical and biological properties for future applications in bone tissue engineering.

Effect of Hydroxyapatite Formation on Titanium Surface with Bone Morphogenetic Protein-2 Loading through Electrochemical Deposition on MG-63 Cells.

Calcium phosphate ceramics used in dentistry and orthopedics are some of the most valuable biomaterials, owing to their excellent osteoconduction, osteoinduction, and osseointegration. Osteoconduction and osteoinduction are critical targets for bone regeneration, and osseointegration is essential for any dental implantations. In this study, a hydroxyapatite (HAp) hybrid coating layer with the sequential release of bone morphogenetic protein 2 (BMP-2) was deposited onto an etched titanium substrate by electrochemical deposition. The resulting release of BMP-2 from Ti–HAp was assessed by immersing samples in a simulated buffer fluid solution. Through coculture, human osteosarcoma cell proliferation and alkaline phosphatase activity were assessed. The characteristics and effect on cell proliferation of the hybrid coatings were investigated for their functionality through X-ray diffraction (XRD) and cell proliferation assays. Findings revealed that −0.8 V vs. Ag/AgCl (3 M KCl) exhibited the optimal HAp properties and a successfully coated HAp layer. XRD confirmed the crystallinity of the deposited HAp on the titanium surface. Ti-0.8 V Ti–HAp co-coating BMP sample exhibited the highest cell proliferation efficiency and was more favorable for cell growth. A successful biocompatible hybrid coating with optimized redox voltage enhanced the osseointegration process. The findings suggest that this technique could have promising clinical applications to enhance the healing times and success rates of dental implantation.

Polydopamine-mediated surface modifications of poly l-lactic acid with hydroxyapatite, heparin and bone morphogenetic protein-2 and their effects on osseointegration

Surface modified poly l-lactic acid (PLLA) samples with hydroxyapatite (HA), heparin and bone morphogenetic protein-2 (BMP-2) mediated by polydopamine (pDA) coating (PLLA/pDA/HA/Hep/BMP-2) were prepared, and their effects on the enhancements of bone formation and osseointegration were evaluated in vitro and in vivo as compared to PLLA, PLLA/pDA/HA, and PLLA/pDA/Hep/BMP-2. The changes in surface chemical compositions, morphologies and wettabilities were observed by X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) and water contact angle measurements. Pre-coating of HA particles with pDA provided uniform and homogeneous anchoring of particles to PLLA surface. In addition, the strong ionic interaction between heparin and pDA led PLLA surface readily heparinized for loading of BMP-2. In vitro experiments revealed that the levels of alkaline phosphatase (ALP) activity, calcium deposition, and osteocalcin (OCN) gene expression were higher in MG-63 human osteosarcoma cell lines grown on PLLA/pDA/HA/Hep/BMP-2 than on control PLLA, PLLA/pDA/HA, and PLLA/pDA/Hep/BMP-2. In vivo studies using micro-computed tomography (micro-CT) also showed that PLLA/pDA/HA/Hep/BMP-2 screw exhibited greatest value of bone volume (BV) and bone volume/tissue volume (BV/TV) among samples. Histological evaluations with H&E and Von Kossa staining demonstrated that a combination of HA and BMP-2 contributed to the strong osseointegration.

In Vitro and In Vivo Correlation of Bone Morphogenetic Protein-2 Release Profiles from Complex Delivery Vehicles.

Local sustained delivery of bioactive molecules from biomaterials is a promising strategy to enhance bone regeneration. To optimize delivery vehicles for bone formation, the design characteristics are tailored with consequential effect on bone morphogenetic protein-2 (BMP-2) release and bone regeneration. Complying with the 3R principles (Replacement, Reduction, and Refinement), the growth factor release is often investigated in vitro using several buffers to mimic the in vivo physiological environment. However, this remains an unmet need. Therefore, this study investigates the in vitro-in vivo correlation (IVIVC) of BMP-2 release from complex delivery vehicles in several commonly used in vitro buffers: cell culture model, phosphate buffered saline, and a strong desorption buffer. The results from this study showed that the release environment affected the BMP-2 release profiles, creating distinct relationships between release versus time and differences in extent of release. According to the guidance set by the U.S. Food and Drug Administration (FDA), IVIVC resulted in level A internal predictability for individual composites. Since the IVIVC was influenced by the BMP-2 loading method and composite surface chemistry, the external predictive value of the IVIVCs was limited. These results show that the IVIVCs can be used for predicting the release of an individual composite. However, the models cannot be used for predicting in vivo release for different composite formulations since they lack external predictability. Potential confounding effects of drug type, delivery vehicle formulations, and application site should be added to the equation to develop one single IVIVC applicable for complex delivery vehicles. Altogether, these results imply that more sophisticated in vitro systems should be used in bone regeneration to accurately discriminate and predict in vivo BMP-2 release from different complex delivery vehicles.

High-density human mesenchymal stem cell rings with spatiotemporally-controlled morphogen presentation as building blocks for engineering bone diaphyseal tissue.

Emerging biomimetic tissue engineering strategies aim to partially recapitulate fundamental events that transpire during embryonic skeletal development; namely, cellular self-organization and targeted morphogenetic pathway activation. Here, we describe self-assembled, scaffold-free human mesenchymal stem cell (hMSC) rings featuring microparticle-mediated presentation of transforming growth factor-β1 (TGF-β1) and bone morphogenetic protein-2 (BMP-2). We tested the hypothesis that spatiotemporally-controlled dual presentation of TGF-β1 and BMP-2 is superior in modulating in vitro endochondral ossification of high-density cellular constructs compared to single morphogen delivery. hMSC rings were engineered by seeding cells with microparticles presenting (1) TGF-β1, (2) BMP-2, or (3) TGF-β1 + BMP-2 in custom agarose wells to facilitate self-assembly within 2 d, followed by horizontal culture on glass tubes for 5 weeks. At day 2, hMSC rings across groups revealed homogenous cellular organization mimetic of early mesenchymal condensation with no evidence of new matrix or mineral deposition. Significant early chondrogenic and osteogenic priming occurred with TGF-β1 + BMP-2 presentation compared to single morphogen-loaded groups. By week 5, TGF-β1-loaded hMSC rings had undergone chondrogenesis, while presentation of BMP-2 alone or in conjunction with TGF-β1 stimulated chondrogenesis, chondrocyte hypertrophy, and osteogenesis indicative of endochondral ossification. Importantly, tissue mineralization was most compelling with TGF-β1 + BMP-2 loading. Lastly, hMSC ring 'building blocks' were shown to efficiently fuse into tubes within 6 d post self-assembly. The resulting tubular tissue units exhibited structural integrity, highlighting the translational potential of this advanced biomimetic technology for potential early implantation in long bone defects.

Local Delivery of BMP-2 from Poly(lactic-co-glycolic acid) Microspheres Incorporated into Porous Nanofibrous Scaffold for Bone Tissue Regeneration.

The integration of porous scaffold and growth factor is widely accepted as an emerging and powerful strategy for bone tissue regeneration. Herein, we fabricated the polymeric scaffold with macroporous and nanofibrous architecture that composed of poly(L-lactic acid) (PLLA), poly(lactic-co-glycolic acid) (PLGA) and polycaprolactone (PCL) using thermally induced phase separation (TIPS) technique. The bone morphogenetic protein-2 (BMP-2) loaded PLGA microspheres (MS) were prepared and then incorporated into nanofibrous scaffold (NF scaffold) to obtain the BMP-2-loaded composite scaffold (BMP-2@MS/NF scaffold). The in vitro release behavior of BMP-2 from the composite scaffold showed a sustained release of over 5 weeks. The mouse primary osteoblasts (mOBs) grown on these BMP-2-loaded composite scaffolds showed better adhesion and proliferation than those grown on the scaffolds without BMP-2 loading. Also, the BMP-2-loaded composite scaffolds displayed enhanced in vitro osteogenic differentiation of osteoblasts, as evidenced by the results of alkaline phosphatase (ALP) activity and Alizarin Red S staining. In addition, histology from an in vivo osteogenic potential evaluation from a rat calvarial defect model demonstrated high osteoinductivity of these BMP-2-loaded composite scaffolds. These results suggested that constructed BMP-2-loaded composite scaffold had the potential to be used as a bone implant, whose osteogenic ability was promoted by the prolonged release of BMP-2.

Multilayered pore-closed PLGA microsphere delivering OGP and BMP-2 in sequential release patterns for the facilitation of BMSCs osteogenic differentiation.

Bone tissue regeneration may be more effectively administrated by controlled release of multiple biofactors, given that bone healing comprises a cascade of biological events controlled by numerous cytokines and growth factors (GFs). Here, we propose a novel microcarrier with the capability to sequentially deliver dual biofactors for better controlling the bone regeneration process. First, osteogenic growth peptide (OGP) was incorporated in porous poly(lactic-co-glycolic) acid (PLGA) microspheres by a simple solution dipping method and subsequent pore-closing treatment. Then, a multilayered polyelectrolyte coating ((HA-CS)2 -Hep-BMP-2-Hep-(CS-HA)2 ) was prepared on the surface of such OGP-loaded pore-closed PLGA microspheres by layer-by-layer assembly. Results showed that the OGP release was minimal (<17.1%) in the first 15 days but accelerated remarkably thereafter, while at least 60.3% of the bone morphogenetic protein-2 (BMP-2) load was released in the first 15 days and only very slow release was observed subsequently. Further in vitro cell experiments showed that the dual-biomolecule-loaded microspheres elicited more cells with extremely elongated cellular morphology, much higher alkaline phosphatase level and upregulated expression of osteocalcin. Such a dual loading of OGP and BMP-2 had a more positive impact on bone marrow mesenchymal stem cells proliferation and osteogenic differentiation compared with either OGP or BMP-2 alone, suggesting potential synergistic benefit of the sequential release of multiple peptide-based biofactors in a coordinated manner. Overall, this dual delivery system may provide a therapeutic strategy sequentially targeting multiple events (or mechanisms) during bone healing, which is believed to benefit the regenerative repair of bone defects. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 95-105, 2018.

Bicomponent fibrous scaffolds made through dual-source dual-power electrospinning: Dual delivery of rhBMP-2 and Ca-P nanoparticles and enhanced biological performances.

Electrospun scaffolds incorporated with both calcium phosphates (Ca-P) and bone morphogenetic protein-2 (BMP-2) have been used for bone tissue regeneration. However, in most cases BMP-2 and Ca-P were simply mixed and loaded in a monolithic structure, risking low BMP-2 loading level, reduced BMP-2 biological activity, uncontrolled BMP-2 release and inhomogeneous Ca-P distribution. In this investigation, novel bicomponent scaffolds having evenly distributed rhBMP-2-containing fibers and Ca-P nanoparticle-containing fibers were made using an established dual-source dual-power electrospinning technique with the assistance of emulsion electrospinning and blend electrospinning. The release behavior of rhBMP-2 and Ca2+ ions could be separately tuned and the released rhBMP-2 retained a 68% level for biological activity. MC3T3-E1 cells showed high viability and normal morphology on scaffolds. Compared to monocomponent scaffolds, enhanced cell proliferation, alkaline phosphatase activity, cell mineralization, and gene expression of osteogenic markers were achieved for bicomponent scaffolds due to the synergistic effect of rhBMP-2 and Ca-P nanoparticles. Bicomponent scaffolds with a double mass elicited further enhanced cell adhesion, spreading, proliferation, and osteogenic differentiation. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2199-2209, 2017.