Bohai Bay Basin Research Articles

Revealing a deep condensate gas reservoir in an Archeozoic metamorphic buried hill by ultrasonic image logs, spectroscopy logs, and core data, Bohai Bay Basin, Eastern China

The Archeozoic metamorphic buried hill reservoir of the Bozhong Sag in the Bohai Bay Basin has a proven condensate gas reserves of over 100 billion cubic meters. A clear understanding of buried hill vertical zone variation is vital to characterize reservoir quality and reservoir distribution. Conventional core sample analysis is far more sufficient to characterize the complexity and diversity of basement reservoirs. Weathering, lithofacies, and fracture networks also play important roles in controlling the reservoir property. The fractures in the target area are unevenly developed due to multitectonic activities and stress field rotation during the initial period of basement evolution. In addition, the mineral composition of the lithofacies is complex due to metamorphism, alteration, and weathering, which further affect the reservoir quality. Characterizing the effective fracture distribution of the buried hill formation across the area is crucial to classifying good reservoir zonation. However, identifying fractures by an electrical resistivity borehole image endures high uncertainty as conductive fractures are possibly filled by clay, iron minerals (pyrite or siderite), or mud filtrate. Ultrasonic image logs are used to identify fractures in combination with amplitude and transit time images, which can clearly identify the effective or noneffective fractures. In total, four types of fractures are identified: closed fractures, fully open fractures, partially open fractures, and vuggy open fractures. Based on the lithofacies, fracture development, and volumetric minerals from spectroscopy logs and conventional logs, the Archeozoic metamorphic buried hill is revealed zone by zone: the strongly weathered zone, subweathered zone, and insider buried hill zone. The reservoir quality, lithofacies identification, multiwell fracture development analysis by three buried hill zones, and production controlling factors are fully demonstrated.

Hydrothermal alteration mechanisms of an Archaean metamorphic buried hill and the models for reservoir zonation, Bozhong depression, Bohai Bay Basin, China

Multiple metamorphic buried-hill hydrocarbon reservoirs have been recently discovered in the Bozhong Depression, Bohai Bay Basin. Among them, the buried-hill reservoirs in the BZ13, BZ19 and BZ26 regions have the largest condensate gas reserve in eastern China. The hydrocarbon-bearing reservoir has a large thickness with a maximum of ∼1 km, making the oil-equivalent reserve exceed 5 × 108 tons. This study used petrography, isotopes, gas composition, zircon U–Pb geochronology, X-ray diffraction, electronic probe and hydrothermal dissolution experiments to discuss the formation mechanisms of the metamorphic buried-hill reservoirs. The results indicate that the reservoirs 500 m below the surface of the buried hill have been significantly altered by the mantle-derived CO2. This is supported by the carbon isotope of CO2, He isotope of the helium gas, strong negative excursions in δ18OPDB, positive excursions in δ13CPDB, Co/Ni ratio greater than 1 in pyrite and secondary characteristic minerals such as dawsonite. Hydrothermal dissolution experiments using CO2 result in the precipitation of kaolinite, ankerite and quartz cements, which is consistent with petrographic observation. The mantle-derived CO2 reacts with feldspars, hornblende, biotite and carbonates, creates secondary dissolution pores and significantly improves reservoir quality. Moreover, partial carbonate cements exhibit negative excursions in δ13CPDB and the depletion of light rare earth elements, indicating the influence of organic acids-bearing low-temperature hydrothermal fluids. Therefore, three development models illustrating the formation of metamorphic buried-hill reservoirs were proposed. This study may serve as a reference for the hydrocarbon exploration in metamorphic buried-hill reservoirs.

Differences and Causal Mechanisms in the Lithospheric Thermal Structures in the Cratons in East China: Implications for Their Geothermal Resource Potential

The thermal structure of the lithosphere is key to understanding its thickness, properties, evolution, and geothermal resources. Cratons are known for their low heat flow and deep lithospheric roots. However, present-day cratons in East China have geothermal characteristics that are highly complex, with variable heat flow values, diverging from the typical thermal state of cratons. In this study, we conducted a detailed analysis of the geothermal geological background of the cratons in East China, summarizing the thermal state and tectono-thermal processes of different tectonic units, calculating the temperature at various depths, and discussing differences in temperature and thermal reservoirs at different depths. The observed lithospheric thermal thickness within the North Jiangsu Basin and the Bohai Bay Basin is notably reduced in comparison to that of the Jianghan Basin and the Southern North China Basin. The phenomenon of craton destruction during the Late Mesozoic emerges as a pivotal determinant, enhancing the geothermal resource prospects of both the Bohai Bay Basin and the North Jiangsu Basin. Our findings contribute significantly to the augmentation of theoretical frameworks concerning the origins of heat sources in global cratons. Furthermore, they offer invaluable insights for the methodical exploration, evaluation, advancement, and exploitation of geothermal resources.

Hydrocarbon Charging and Accumulation Process of the Large Bozhong19-6 Condensate Gas Reservoirs in the Southwestern Bozhong Sub-Basin, Bohai Bay Basin, China

Hydrocarbon Charging and Accumulation Process of the Large Bozhong19-6 Condensate Gas Reservoirs in the Southwestern Bozhong Sub-Basin, Bohai Bay Basin, China

Shale oil development techniques and application based on ternary-element storage and flow concept in Jiyang Depression, Bohai Bay Basin, East China

The ternary-element storage and flow concept for shale oil reservoirs in Jiyang Depression of Bohai Bay Basin, East China, was proposed based on the data of more than 10 000 m cores and the production of more than 60 horizontal wells. The synergy of three elements (storage, fracture and pressure) contributes to the enrichment and high production of shale oil in Jiyang Depression. The storage element controls the enrichment of shale oil; specifically, the presence of inorganic pores and fractures, as well as laminae of lime-mud rocks, in the saline lake basin, is conducive to the storage of shale oil, and the high hydrocarbon generating capacity and free hydrocarbon content are the material basis for high production. The fracture element controls the shale oil flow; specifically, natural fractures act as flow channels for shale oil to migrate and accumulate, and induced fractures communicate natural fractures to form complex fracture network, which is fundamental to high production. The pressure element controls the high and stable production of shale oil; specifically, the high formation pressure provides the drive force for the migration and accumulation of hydrocarbons, and fracturing stimulation significantly increases the elastic energy of rock and fluid, improves the imbibition replacement of oil in the pores/fractures, and reduces the stress sensitivity, guaranteeing the stable production of shale oil for a long time. Based on the ternary-element storage and flow concept, a 3D development technology was formed, with the core techniques of 3D well pattern optimization, 3D balanced fracturing, and full-cycle optimization of adjustment and control. This technology effectively guides the production and provides a support to the large-scale beneficial development of shale oil in Jiyang Depression.

Igneous intrusion contact metamorphic system and its reservoir characteristics: A case study of Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin, China

Taking the Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin as an example, this study comprehensively utilizes seismic, mud logging, well logging, physical property analysis and core thin section data to investigate the metamorphic reservoir formed by contact metamorphism after igneous rock intrusion. (1) A geological model of the igneous intrusion contact metamorphic system is proposed, which can be divided into five structural layers vertically: the intrusion, upper metamorphic aureole, lower metamorphic aureole, normal sedimentary layers on the roof and floor. (2) The intrusion is characterized by xenoliths indicating intrusive facies at the top, regular changes in rock texture and mineral crystallization from the center to the edge on a microscopic scale, and low-angle oblique penetrations of the intrusion through sedimentary strata on a macroscopic scale. The metamorphic aureole has characteristics such as sedimentary rocks as the host rock, typical palimpsest textures developed, various low-temperature thermal metamorphic minerals developed, and medium-low grade thermal metamorphic rocks as the lithology. (3) The reservoir in contact metamorphic aureole has two types of reservoir spaces: matrix pores and fractures. The matrix pores are secondary “intergranular pores” distributed around metamorphic minerals after thermal metamorphic transformation in metasandstones. The fractures are mainly structural fractures and intrusive compressive fractures in metamudstones. The reservoirs generally have three spatial distribution characteristics: layered, porphyritic and hydrocarbon impregnation along fracture. (4) The distribution of reservoirs in the metamorphic aureole is mainly controlled by the intensity of thermal baking. Furthermore, the distribution of favorable reservoirs is controlled by the coupling of favorable lithofacies and thermal contact metamorphism, intrusive compression and hydrothermal dissolution. The proposal and application of the geological model of the intrusion contact metamorphic system are expected to promote the discovery of exploration targets of contact metamorphic rock in Nanpu sag, and provide a reference for the study and exploration of deep contact metamorphic rock reservoirs in the Bohai Bay Basin.

Data-Driven Classification and Logging Prediction of Mudrock Lithofacies Using Machine Learning: Shale Oil Reservoirs in the Eocene Shahejie Formation, Bonan Sag, Bohai Bay Basin, Eastern China

As the world’s energy demand continues to expand, shale oil has a substantial influence on the global energy reserves. The third submember of the Mbr 3 of the Shahejie Fm, characterized by complicated mudrock lithofacies, is one of the significant shale oil enrichment intervals of the Bohai Bay Basin. The classification and identification of lithofacies are key to shale oil exploration and development. However, the efficiency and reliability of lithofacies identification results can be compromised by qualitative classification resulting from an incomplete workflow. To address this issue, a comprehensive technical workflow for mudrock lithofacies classification and logging prediction was designed based on machine learning. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were conducted to realize the automatic classification of lithofacies, which can classify according to the internal relationship of the data without the disturbance of human factors and provide an accurate lithofacies result in a much shorter time. The PCA and HCA results showed that the third submember can be split into five lithofacies: massive argillaceous limestone lithofacies (MAL), laminated calcareous claystone lithofacies (LCC), intermittent lamellar argillaceous limestone lithofacies (ILAL), continuous lamellar argillaceous limestone lithofacies (CLAL), and laminated mixed shale lithofacies (LMS). Then, random forest (RF) was performed to establish the identification model for each of the lithofacies and the obtained model is optimized by grid search (GS) and K-fold cross validation (KCV), which could then be used to predict the lithofacies of the non-coring section, and the three validation methods showed that the accuracy of the GS–KCV–RF model were all above 93%. It is possible to further enhance the performance of the models by resampling, incorporating domain knowledge, and utilizing the mechanism of attention. Our method solves the problems of the subjective and time-consuming manual interpretation of lithofacies classification and the insufficient generalization ability of machine-learning methods in the previous works on lithofacies prediction research, and the accuracy of the model for mudrocks lithofacies prediction is also greatly improved. The lithofacies machine-learning workflow introduced in this study has the potential to be applied in the Bohai Bay Basin and comparable reservoirs to enhance exploration efficiency and reduce economic costs.

Occurrence of State of Gold in Crude Oil and Its Economic Significance

Gold and petroleum are also strategic resources of great importance to national security. With the increasing demand for energy, multi-energy cooperative exploration has become an inevitable trend of resource development and utilization. Petroleum and hydrothermal gold deposits may form together, with similar evolutionary trends in their formation, migration, and enrichment. Petroleum reservoirs and gold deposits are closely coupled under certain geological conditions. The solubility of gold in crude oil and its forms of occurrence are important in determining the mechanisms of interaction between gold and petroleum and in facilitating the recovery of gold from gold-bearing petroleum. In this study, the occurrence of gold in crude oil from the Linnan Depression in the Bohai Bay Basin, China, was studied using inductively coupled plasma–mass spectrometry and X-ray photoelectron spectroscopy. Concentrations of gold in crude oil from the Linpan and Shanghe oilfields averaged 44.5 ppb, which is well above the minimum concentration required for hydrothermal gold mineralization. Gold has an affinity with carbon, oxygen, and sulfur, and its concentration in crude oil is positively correlated with total acid and sulfur contents. We speculate that gold may exist in crude oil as complexes with organic acids or thiols, with crude oil thus being a transport medium for gold.

Determining complex petroleum migration pathways along faults and sandbodies: a new method and application

Introduction: The reservoir-forming rule in the paleo-slope zone outside petroliferous basins’ source kitchens of the eastern basin in China is unclear, manifested in the distribution of oil and gas in complex multi-layers. This study focuses on petroleum migration along faults and sandbodies to clarify this question and improve the exploration efficiency of petroleum in areas with similar geological conditions.Method: We summarized two models of petroleum migration based on two factors: the connected sandbodies and the vertical unsealing faults. Model I is conducive to the migration of hydrocarbons within a single layer, while Model II is conducive to the vertical migration of hydrocarbons across layers. Combining the means for evaluating fault sealing and sandbody connectivity, integrating these models could form a set of characterization methods for the distribution of the complex fluid migration pathways.Results: This method is applied to characterize the complex multilayer migration pathways distribution in the first and second members of the Shahejie Formation in the central-southern area of the Wen’an Slope in the Baxian Sag, Jizhong Depression, Bohai Bay Basin, China. The results show that, in the first and second members of the Shahejie Formation in the central-southern area of the Wen’an Slope, the area for Model II is mainly distributed in the central-eastern regions. The second member has a Model I area distributed in its western region, and the first member has a Model I area distributed in its centraleastern parts. The latter distribution area is larger than the former. According to hydrocarbon migration analysis, the first member is more conducive to large regional migration and accumulation of hydrocarbons than the second member.Discussion: The predicted result of petroleum migration is consistent with the hydrocarbon distribution found in the central-southern areas of the Wen’an Slope, which is that oil and gas distribution in the first member is significantly greater than that in the second member. Thus, our method is feasible for characterizing the regional distribution of complex multi-layer migration pathways in simple tectonic setting and oil source conditions. However, further research is still needed to increase the effectiveness of present petroleum migration analysis.

Investigation on the thermal maturity, organic matter sources and depositional environment of lacustrine source rocks in the Dongying Formation of the Bozhong Sag, Bohai Bay Basin, China

The unclear understanding of the source rock characteristics for the Paleogene Dongying Formation in the Bozhong Sag leads to the lack of cognition in oil and gas exploration. This research systematically evaluated the discrepancy in geochemical characteristics of source rock intervals in the Dongying Formation based on detailed analysis using Rock‐Eval pyrolysis, total organic carbon (TOC), vitrinite reflectance (Ro), maceral components, stable carbon isotopes and biomarker parameters. It discusses the organic matter sources, depositional environment, thermal maturity and hydrocarbon generation potential in the source rock intervals of the Dongying Formation. The organic matter abundance in the third member (E3d3) and lower sub‐member of the second member (E3d2L) of the Dongying Formation is higher, with an average TOC of 2.08% and 1.03%, respectively, indicating that these source rock intervals could have good and excellent quality. The source rocks of the Dongying Formation predominately contain exinite maceral group and type II1 and II2 kerogen. The thermal evolution is mainly in the low‐mature and mature stages. The organic matter sources in the Dongying Formation are mainly dominated by mixed origin (the carbon isotope reversal of aromatics also provides a potential explanation). However, the values of 1,2,5−/1,3,6‐trimethylnaphthalene, (1,2,5,6 + 1,2,3,5)‐tetramethylnaphthalene/tetramethylnaphthalenes, methyldibenzofuran/methylphenanthrene (MDBF/MP) and dibenzofuran/phenanthrene (DBF/PHEN) parameters in the E3d3 and some samples in E3d2L decipher relatively smaller values than other source rock intervals, proving the enhancement of the contribution of lower organisms. Moreover, the terrestrial input in the bottom‐up deposition process of the Dongying Formation gradually increases. The depositional environment reveals the Dongying Formation source rocks mainly developed freshwater sulphur‐poor lacustrine facies and shallow lake‐fluvial delta facies in an open clay‐rich sedimentary environment with poor water column stratification, belonging to the typical weak oxidation–reduction depositional conditions. The comprehensive geochemical evaluation concludes that the favourable supply of lower organisms and stable clay‐rich depositional environment in the E3d3 interval of the Dongying Formation are potential explanations for the formation of lacustrine source rocks with high organic matter abundance, intermediate thermal evolution and excellent hydrocarbon generation potential, providing a good foundation for the exploration and development prospects of hydrocarbons.

Lacustrine deposition in response to the middle eocene climate evolution and tectonic activities, Bohai Bay Basin, China

The lower unit of the third member of the Eocene Shahejie Formation (Es3L, 42.5 to ∼40Ma) is one of the most important petroleum exploration targets in the Bohai Bay Basin. Lacustrine deposits are widely distributed in the Es3Lunit of the Shulu Sag and display strong vertical and horizontal variations in lithofacies and geochemical characteristics. Based on core data, thin-section petrography, stable δ13C isotope analyses, and organic geochemistry data, eight lithofacies and six evolutionary lake stages are identified. Combining the results of the astronomical time scale (ATS) and the radiometric age, the correlation between the evolutionary lake stages of Es3Land the Eocene global climate curve was illustrated. Tectonic movement caused the basin to subside and resulted in shallow lake formation (Stage 1) during the cooling phase prior to the Middle Eocene Climatic Optimum (MECO); then, the lake level began to rise (Stage 2) with an increasingly warm and humid climate. Stage 3 corresponds to the peak of the MECO and was influenced by the warm and humid climate during the thermal maximum period, forming a deep, freshwater lake. This stage was followed by highly turbulent lake conditions (Stage 4), which were influenced by both the cooling climate and intensive tectonic activity. Subsequently, a stable lake (Stage 5) was formed, which was mainly controlled by the slightly warming climate since the tectonic movement was relatively stable, followed by another stage of turbulent lake conditions (Stage 6). The results show that the global mid-Eocene climate played an important role on the relative lake level changes and TOC enrichment. The MECO led to a rise in the relative sea-level and the obviously rise in relative lake-level in the Bohai Bay Basin. The evolution of the depositional settings was controlled by both global climate and tectonic activities and accounted for the deposition and distribution of lithofacies with distinctly different characteristics and origins.

New insights into Cenozoic evolution of the Shijiutuo uplift, Bohai Bay basin, China: Constraints from apatite fission track analysis and seismic data

The Shijiutuo Uplift within the Bohai Bay Basin(BBB)has experienced a complex evolutionary history since the Cenozoic. Studies of the Cenozoic evolution of the Shijiutuo Uplift are important for basin tectonics and petroleum geology. The formation of uplifts in rift basins is generally controlled by regional tectonic event and fault-block tilting. In this study, apatite fission track (AFT) data from fourteen samples and seismic data analysis were used to study the processes of regional uplift and fault-block tilting. We further investigated the Cenozoic evolution and formation mechanism of the Shijiutuo Uplift. The results indicated that the Shijiutuo Uplift experienced a two-phase differential tectonic uplift and erosion history (1) Widespread rapid uplift and erosion during the early Cenozoic (65–55 Ma) (2) Widespread uplift and erosion from 40 Ma to 16 Ma. The uplift and erosion substages of 40–38 Ma and 26–16 Ma were mainly caused by regional uplift, whereas those of 38–26 Ma resulted from fault-block tilting. Since the end of the third member from the Eocene Shahejie Formation, the Shijiutuo Uplift began to rise, causing the greater Bozhong Depression to be separated into the independent Qinnan and Bozhong Sags. These tectonic uplift and erosion events have a wide range of responses and regional dynamics in eastern China. The findings of this study will lead to a better understanding of the evolution and formation of uplifts within the BBB.

Classification and reservoir characteristics of lacustrine carbonate conglomerate in the Shulu Sag of the Bohai Bay Basin

Carbonate conglomerate in the lower part of the third member of the Eocene Shahejie Formation comprises one of the most important petroleum exploration targets in the Bohai Bay Basin. Based on core observations and thin-section identifications, the carbonate conglomerate is divided into five types in the central area of the Shulu Sag. Reservoir space types are studied by observation through casting thin sections, fluorescent thin sections and scanning electron microscopes. The category of carbonate conglomerate is grouped into five classes: clast-supported extraformational calcirudite (LF1), clast-supported mixed-source calcirudite (LF2), clast-supported intraformational calcirudite (LF3), matrix-supported extraformational calcirudite (LF4) and matrix-supported mixed-source calcirudite (LF5). The mixed-source calcirudites and intraformational calcirudites are relatively rare and consist of gravel-sized micritic intraclasts formed from the intra-basin soft lime mud sediments and terrigenous clasts from the surrounding provenance areas. The conglomerate rocks in the Shulu Sag can be primarily attributed to two genetic types: ‘fan delta formed by alluvial fan and lacustrine’ and ‘seismic-induced slump fan’. The rock types formed by fan deltas mainly include LF1 and LF4. The rock types formed by seismic-induced slump fans are more complex and include LF1, LF2, LF3, LF4 and LF5. The reservoir space consists of various types, including intra-granular pores (e.g. dissolution pores in pyrite and intercrystalline dissolution pores in dolomite), intergranular pores, fractures (tectonic fractures, fractures around grains, diagenetic shrinkage fractures and fractures in the allogenic grains) and organic matter pores. The reservoir spatial distribution is mainly affected by the content of terrigenous grain and matrix, grain composition and fracture density. LF1 exhibits the best reservoir properties. LF2 and LF4 have the second best reservoir quality. They are all excellent tight oil reservoirs in the Shulu Sag.

Reservoir Characterization of Alluvial Glutenite in the Guantao Formation, Bohai Bay Basin, East China

Alluvial glutenite reservoirs have obviously stronger heterogeneous and more complex control factors than sandstone reservoirs. Taking the Binxian Uplift area in the Boahi Bay Basin as an example, the aim of this study is to clarify the characteristics and control factors of the alluvial glutenite reservoir quality and the influence of reservoir properties on hydrocarbon accumulation. Pore types in the study area mainly include residual intergranular pores, intergranular dissolved pores, intragranular dissolved pores, and mold pores. The residual intergranular pores and intergranular dissolved pores are the main pore types. Most samples have porosity greater than 15% and permeability is mainly concentrated between 50 mD and 500 mD. It is shown that lithology type, microfacies, and diagenesis have significant impact on the reservoir quality. The reservoir qualities of very fine sandstone and fine sandstone are better than those of conglomerate and gravel-bearing sandstone. Instead of grain size, sorting affects the alluvial glutenite reservoir quality significantly. Oil-bearing samples commonly have sorting coefficient less than 2 while non-oil-bearing samples have sorting coefficient larger than 2. There are significant differences in reservoir physical properties of different sedimentary microfacies. The stream flow in mid-alluvial fan (SFMA) and braided channels outside alluvial fans (BCOA) have relatively weaker compaction and better reservoir quality than the overflow sand body (OFSB) and debris-flow in proximal alluvial fan (DFPA). Calcite cementation, the main cement in the study area, commonly developed at the base of SFMA and BCOA and near the sandstone-mudrock contacts. The source of calcium carbonate for calcite cement mainly came from around mudstone. High calcite cement content commonly results in low porosity and permeability. Individual glutenite thickness is also an important influencing factor on reservoir quality. Reservoirs with large thickness (>4 m) have high porosity and permeability. Dissolution occurred in the reservoir, forming secondary dissolution pores and improving reservoir quality. The dissolution fluid for formation of secondary pores is mainly meteoric waters instead of organic acid. The reservoir property has an important influence on hydrocarbon accumulation. The lower limit of physical properties of an effective reservoir is a porosity of 27% and permeability of 225 mD. The findings of this study can be utilized to predict the reservoir quality of alluvial glutenite reservoirs effectively in the Bohai Bay Basin and other similar basins.

The Sequence Stratigraphy and Sedimentary Evolution of the Guantao Formation in the Binxian Uplift Area, Bohai Bay Basin, China

Due to the influence of multiple tectonic movements in rift basins, the sequence and sedimentary filling modes of continental petroleum reservoirs are complex, which makes it difficult to establish isochronous stratigraphic frameworks and thus affects the accuracy of subsequent predictions of effective sand bodies. Taking the Guantao Formation of the Binxian uplift and the surrounding areas as an example, this study established the sequence stratigraphic framework of the Guantao Formation and discussed the controlling effect of sequence stratigraphy on sedimentary filling. According to a combination method of seismic data, well log data, the wavelet transform technique (WTT), and Integrated Prediction Error Filter Analysis (INPEFA) methods, the Guantao Formation in the study area can be divided into 1 long-term cycle (LNG), 4 mid-term cycles (MNG1–MNG4, from bottom to top), and 11 short-term cycles (SNG1–SNG11, from bottom to top). Based on comprehensive analysis of geological and seismic data, three sedimentary facies can be classified: alluvial fan facies, braided fluvial facies, and meandering fluvial facies. The sequence stratigraphic style of the study area has a significant controlling effect on sedimentation and sand body distribution. Different levels of cycles have different impacts on sedimentary facies/microfacies types, the development degree of each sedimentary microfacies, and sand body distribution. The long-term cycle controls the distribution of sedimentary facies, while the mid-term and short-term cycles control the distribution of sedimentary microfacies. The bottom interface of the Guantao Formation (T1) served as the dominant migration channel in the study area, connecting the reservoir and source rocks. When the base-level was in the low stage (MNG1), a large amount of sand bodies developed, forming favorable reservoirs for petroleum. The interlayers at the top of the long- and mid-term cycles served as seal layers to prevent oil and gas from escaping. The MNG1 cycle has a good combination of reservoir and seal, resulting in the accumulation of oil and gas in the MNG1 strata, which became the main oil- and gas-producing layer in the area. These study results can provide effective guidance for future prediction of the distribution of sand bodies and high-quality reservoirs.

Evolution of provenance and sedimentary records in multiphase rift basins: Insights from petrology, detrital zircon geochronology, and seismic reflections of Oligocene Liaozhong Depression, Bohai Bay Basin, China

Sedimentary provenance in multiphase rift basins exhibits rapid variations during distinct tectonic sub-stages, and a close association exists between alterations in sediment source, geomorphology, and tectono-depositional records. This study comprehensively integrates sandstone petrology, heavy mineral assemblages, detrital zircon characters, drill cores, well logs, and seismic reflections to investigate the evolution of provenance and sedimentary records within a complete rifting episode in a lacustrine basin. Three tectono-depositional models for different tectonic sub-stages have been established. During the early strengthened stage of Rifting Episode IV (Sqd3), sediments were primarily sourced from the Liaoxi Uplift, serving as an intrabasinal provenance. These sediments mainly consist of medium-to coarse-grained sandstones with short-distance transportation, forming a transversely-sourced fan-delta and gravity-flow depositional system. Additionally, wedge-shaped seismic configurations were observed along the flow direction. In the middle stage of Rifting Episode IV (Sqd2), the Liaoxi Uplift was submerged, and sediments originated from the Qinhuangdao, Suizhong, and Liaodong Uplift regions. Lake basin expanded during this period, resulting in axially and transversely-sourced river deltaic deposits in a multi-stage superimposed manner, associated with gravity-flow deposits. The sediments are predominantly composed of medium-to fine-grained sandstones that underwent long-distance transportation, accompanied by a significant increase in mudstone content. Simultaneously, sigmoid-oblique and sigmoidal geometries extensively developed. During the late weakened stage of Rifting Episode IV (Sqd1), sediments originated from the Qinhuangdao and Suizhong regions, forming a transversely-sourced shoal-water deltaic system enriched in medium-to fine-grained sandstone with limited mudstone. In comparison to Sqd3 and Sqd2, sediments within Sqd1 underwent intermediate-distance transport. Typically, a shingled seismic configuration developed, presenting a sharp contrast with the sigmoid-oblique and sigmoidal reflections within Sqd2. The detailed models of source-to-sink systems developed in this study are expected to enhance the comprehensive understanding of sedimentological responses to provenance evolution across various tectonic sub-stages in lacustrine rift basins.

Fluid tracing and evolution at micron-scale of shales in faulted lake basin: Evidence and constraints from in-situ analysis of analcime

The Huanghua Depression in the Bohai Bay Basin has experienced significant development of massive NNE-NE faults, influenced by the Eocene activation of the Lanliao Fault and its subsequent Oligocene dextral intensification. These faults serve as a conduit for connate fluid and magmatic hydrothermal fluid (MHF), thereby forming a complex fluid system. Gaining an understanding of these fluid activities is essential for research into mass balance and hydrocarbon migration within shales. This study explores the origin and distribution of analcime, aligns the fluid evolution stage with different analcime types, and constructs a comprehensive water-rock reaction sequence. The study identifies six types of analcime based on occurrence characteristics (occurring as laminae, lens, fracture filling, bioshell filling, vein marginal crystal and cement). The above six types of analcime is further classified into hydrothermal fluid origin analcime (HFOA: include analcime cement, vein marginal crystal, lens, fracture filling and bioshell filling) and connate fluid origin analcime (CFOA: analcime laminae) based on major elemental indicators (Si/Al and 10K/(10K + Na)). HFOA has lower ∑REE (rare earth element) and strong positive correlation between ∑REE and LILEs (large ionic lithophilic elements); while CFOA has higher ∑REE and weak positive correlation between ∑REE and LILEs. Different analcime types correlate with varying fluid properties and transport stages. HFOA forms during MHF upwelling. After the MHF entering and mixing with the lake water, thermal repulsions between the crystal particles made it move to form fine-grained sedimentary layer, the connate fluid trapped in pores directly precipitate to form CFOA, or form CFOA by modifying clay minerals and feldspars. Considering the tectonic context, we infer that the formation of analcime was primarily driven by high-frequency, low-intensity magmatism, governed by the activation of Lanliao deep fault. The study of analcime can aid in identifying and classifying fluid activity processes, offering a novel perspective for investigating sedimentation and diagenesis in continental shales.

Characteristics, Controlling Factors and Reservoir Quality Implications of Inner Fracture Zones in Buried Hills of Archean Covered Metamorphic Rock in Block 13-2, Bozhong Depression

Inner fracture zones play a decisive role in the formation of high-quality reservoirs in buried hill reservoirs in covered metamorphic rock. Based on core, sidewall core, thin section, seismic, logging and reservoir physical property data, the fracture development characteristics of the Bozhong 13-2 block buried hill reservoir are described in detail and the controlling factors and the influence on reservoir quality are discussed. The results showed: (1) three groups of tectonic fractures developed in the study area—near-EW-striking, ENE-striking and nearly N‒S-striking fractures—were controlled by the early Indosinian thrusting, the late Indosinian to early Yanshanian sinistral strike-slipping and the late Yanshanian late dextral strike-slipping in the Bohai Bay Basin, respectively. The ENE- and nearly-E-W-striking fractures are the most common, and the dip angles of the fractures are mostly between 35° and 75° and thus oblique. (2) The Indosinian-early Yanshanian was the main fracture-forming period, and the dextral strike-slip action in the late Yanshanian was the key to maintaining effective fractures. Imaging logging shows that 97.87% of the fractures are effective fractures. Based on thin section observation, 14.47% of the fractures are unmodified open fractures and 80.37% of the fractures are effective fractures due to reactivation. (3) The late Yanshanian strike-slip fault transformed the deformation adjustment zone formed by the early Indosinian thrust faulting and the core of the fold structure was more conducive to fracture development. The fracture density of a single well located within the deformation adjustment zone and at the core of the fold is between 0.93–1.49 m−1, the fracture density of a single well located only at the core of the fold is between 0.67–0.75 m−1 and that of a single well located at the wing of the fold is between 0.35–0.59 m−1. Diabase dike intrusions promoted the development of local fractures. (4) Fractures promote the migration and accumulation of oil and gas, and the fracture density in the oil layer is between 0.81–2.19 m−1. That in the nonoil layer is between 0.25–1.12 m−1. In addition, fractures not only provide storage space but also effectively improve the reservoir capacity of the inner fracture zones of buried hill reservoirs by concentrating dissolution.

Organic Geochemical Evidence for the Formation of Condensate from Coaly Source Rocks in the Wumaying Buried Hill of the Huanghua Depression, Bohai Bay Basin.

Although oil and gas from coaly source rocks have been widely discovered worldwide, the role of oil generated from coal measures in marine-continental coaly deposits during the Carboniferous-Permian period in the Bohai Bay Basin has long been a subject of debate. The recent discovery of a condensate reservoir in the Wumaying buried hill within the Huanghua Depression of the Bohai Bay Basin offers new potential insights into this issue. In this study, we employed organic geochemical methods to explore the possibility of the Carboniferous-Permian coal deposit being a primary source of the condensate. The distribution of light hydrocarbons and the biomarker assemblage indicate that the condensate did not undergo significant secondary alterations such as thermal cracking, gas invasion fractionation, or biodegradation. The hydrocarbon generation potential of the Carboniferous-Permian coaly source rocks suggests that they could be an important contributor to the formation of condensate. High pristine/phytane ratios (1.0-7.5), an abundant presence of benzene series, and the dominance of C29 steranes (>50%) within the condensate could be indicative of coaly organic matter. These features are comparable to those found in coaly source rocks. Moreover, the stable carbon isotopic compositions of n-alkanes in the condensate, ranging from -26.0 to -30.0‰, correlate well with those from coaly mudstone (-25.4 to -30.0‰). This suggests that the condensate of the Wumaying buried hill may predominantly originate from the Carboniferous-Permian coaly mudstone. When integrated with the geological background, the results distinctly demonstrate that the Carboniferous-Permian coaly source rocks have significantly contributed to the formation of the condensate reservoir in the Wumaying buried hill. This provides an essential reference for future exploration of oil and gas resources derived from the carboniferous-Permian coaly source rocks in the Bohai Bay Basin.

Paleoenvironmental reconstruction and organic matter accumulation of the paleogene shahejie oil shale in the Zhanhua Sag, Bohai Bay Basin, Eastern China

The controlling factors of organic-rich shale accumulation is essential for the exploration and development of shale oil and gas resources. The sedimentary environment plays a vital role in the formation of organic-rich sediments in lacustrine facies. This article unravels the mineralogy, geochemistry, and paleoenvironmental evolution during the deposition of the Paleogene Shahejie Formation (Es3L). It discusses the effects of paleoclimate, paleosalinity, paleoredox conditions, paleowater depth, and paleoproductivity on organic matter (OM) enrichment. Finally, the OM enrichment model was established. The results show that the mineralogical compositions are mainly composed of calcite (avg. 40.13%), quartz (avg. 21.64%) and clay minerals (avg. 24.07%), accompanied by dolomite (avg. 7.07%), feldspar (avg. 6.36%) and pyrite (avg. 2.95%). The Es3L shale has a high abundance of OM, with total organic carbon (TOC) ranging from 1.07% to 5.12%. The organic matter type is mainly composed of type Ⅰ-Ⅱ1 kerogen, which is generally considered a good-quality source rock. The source of OM is a mixture of lower bacteria, algae, and plants. During the early sedimentary period, the paleoclimate was dry and cold, with high salinity, intense reducibility, and relatively low productivity. During the late sedimentary period, the climate became warmer and more humid. As a result, the salinity decreased to a level that was suitable for biological reproduction, and productivity increased gradually due to the input of terrigenous plants. Paleosalinity and paleoclimate determined the environment of the sedimentary period, in addition, paleoproductivity and paleoredox condition indicated the formation and preservation conditions of OM. The warm and humid climate, brackish water, suitable reduction conditions and high productivity are the favorable conditions for the generation and preservation of organic matter. The research results may have implications for the genetic mechanisms of organic matter accumulation. They will provide theoretical and technical insights into the exploration and development of shale oil.