Body Structure Research Articles

Evaluation of the lethal effect of hydrogen peroxide on the root-knot nematode, Meloidogyne javanica, and the disruption in the activity of enzymes related to its biosynthesis

Summary In this study, the accumulation of hydrogen peroxide (H2O2) in different parts (healthy root, gall, root attached to gall, aerial parts) of healthy tomato plants and plants infected by the root-knot nematode, Meloidogyne javanica, was investigated after treating the roots with β-aminobutyric acid (BABA). In addition, the effects of different concentrations of H2O2 (0-2 mM) on mortality, body structures and the digestive system of second-stage juveniles (J2) were also investigated in in vitro experiments. Results showed that exposure to concentrations of more than 1 mM H2O2 is lethal for J2, while the digestive system is not able to tolerate concentrations of more than 0.2 mM. Evaluating the activity level of enzymes related to biosynthesis and removing H2O2 in treated plants also showed that the nematode has significant suppressive effects on the biosynthesis enzymes of this compound, and this effect is greater in the site of nematode activity than in other parts of the plant. By contrast, the activity of catalase enzyme, as one of the H2O2-removing enzymes, shows a significant increase in all parts of nematode infected plants (especially in galls).

Multistep Iterative Methods for Solving Equations in Banach Space

The novelty of this article lies in the fact that we extend the use of a multistep method for developing a sequence whose limit solves a Banach space-valued equation. We suggest the error estimates, local convergence, and semi-local convergence, a radius of convergence, the uniqueness of the required solution that can be computed under ω-continuity, and conditions on the first derivative, which is on the method. But, earlier studies used high-order derivatives, even though those derivatives do not appear in the body structure of the proposed method. In addition to this, they did not propose computable estimates and semi-local convergence. We checked the applicability of our study to three real-life problems for semi-local convergence and two problems chosen for local convergence. Based on the obtained results, we conclude that our approach improves its applicability and makes it suitable for challenges in applied science.

Numerical simulation and experimental investigation of resistance spot welding with initial gap under tensile shear load

In the resistance spot welding (RSW) process of body structures, the initial gap (IG) occurs frequently. The RSW with IG impact welding quality, and subsequently reducing the structural safety of the whole vehicle. An equivalent displacement method (EDM) is proposed, and a refined finite element model (FEM) is established to accurately simulate the mechanical responses of the RSW with IG under tensile shear loading. This research chose 3 IGs (0 mm, 3 mm and 5 mm) of RSW for investigation. First, a true stress-strain curve of base metal (BM) is obtained by uniaxial tensile test, and hardness of the 3 zone is obtained through hardness test. Then, the stress-strain curves of heat-affected zone (HAZ) and fusion zone (FZ) are fitted from those of BM based on relationship between Vickers hardness and tensile strength. Then, the refined 3D FEM of RSW with initial gaps are established based on EDM. Finally, the model is nonlinear analyzed and compared with the experiment. The results show that the force and displacement curves obtained through simulation are highly consistent with the ones obtained through experiments with the maximum mean integrated relative error (MIRE) is 7.42 %. The average error of the maximum load-bearing capacity is 1.05 %, and the maximum error is 2.58 %. The failure modes are both button pullout, attributed to the relatively low strength of BM. And cracks occur in BM near HAZ and penetrate along the sheet thickness direction. These findings show that numerical simulation of RSW with IG, based on the EDM, effectively reflects its mechanical properties and failure behaviors.

CHARACTERIZATION OF HUMAN FUNCTIONING IN INDIVIDUALS WITH CHRONIC OBSTRUCTIVE PULMONARY DISEASE (COPD) BASED ON THE INTERNATIONAL CLASSIFICATION OF FUNCTIONING, DISABILITY AND HEALTH (ICF): A BROAD REVIEW OF CLINICAL STUDIES

Chronic obstructive pulmonary disease (COPD) is complex condition affecting millions worldwide, characterized by persistent symptoms such as dyspnea, cough, and sputum production due to abnormalities in the airways and/or alveoli. These symptoms significantly impact patients' quality of life, affecting respiratory and muscular functions, as well as emotional and social aspects. The study is a scoping review of clinical trials using the ICF to describe the functionality of individuals with COPD. Fourteen studies were analyzed, highlighting variability in functionality parameters, with emphasis on body functions, activities and participation, environmental factors, and body structures. The Comprehensive ICF Core Set for COPD was widely used in 68.75% of the reviewed articles, demonstrating the comprehensiveness and utility of this tool in assessing patients' health conditions. The most frequently cited functions included respiratory, mobility, and exercise tolerance functions, indicating their significance in the context of COPD. Additionally, emotional aspects and cardiovascular functions were also highlighted as important for understanding patient functionality. These findings underscore the importance of continuous and multidimensional monitoring COPD patients supporting stakeholders on their approaches to develop public health policies aimed at enhancing quality of life for these individuals. This comprehensive approach aids in the effective management of COPD, bearing its multi-faceted effects on individual's lives.

Insights on long-term ecosystem changes from stable isotopes in historical squid beaks

BackgroundAssessing the historical dynamics of key food web components is crucial to understand how climate change impacts the structure of Arctic marine ecosystems. Most retrospective stable isotopic studies to date assessed potential ecosystem shifts in the Arctic using vertebrate top predators and filter-feeding invertebrates as proxies. However, due to long life histories and specific ecologies, ecosystem shifts are not always detectable when using these taxa. Moreover, there are currently no retrospective stable isotopic studies on various other ecological and taxonomic groups of Arctic biota. To test whether climate-driven shifts in marine ecosystems are reflected in the ecology of short-living mesopredators, ontogenetic changes in stable isotope signatures in chitinous hard body structures were analysed in two abundant squids (Gonatus fabricii and Todarodes sagittatus) from the low latitude Arctic and adjacent waters, collected between 1844 and 2023.ResultsWe detected a temporal increase in diet and habitat-use generalism (= opportunistic choice rather than specialization), trophic position and niche width in G. fabricii from the low latitude Arctic waters. These shifts in trophic ecology matched with the Atlantification of the Arctic ecosystems, which includes increased generalization of food webs and higher primary production, and the influx of boreal species from the North Atlantic as a result of climate change. The Atlantification is especially marked since the late 1990s/early 2000s. The temporal patterns we found in G. fabricii’s trophic ecology were largely unreported in previous Arctic retrospective isotopic ecology studies. Accordingly, T. sagittatus that occur nowadays in the high latitude North Atlantic have a more generalist diet than in the XIXth century.ConclusionsOur results suggest that abundant opportunistic mesopredators with short life cycles (such as squids) are good candidates for retrospective ecology studies in the marine ecosystems, and to identify ecosystem shifts driven by climate change. Enhanced generalization of Arctic food webs is reflected in increased diet generalism and niche width in squids, while increased abundance of boreal piscivorous fishes is reflected in squids’ increased trophic position. These findings support opportunism and adaptability in squids, which renders them as potential winners of short-term shifts in Arctic ecosystems.

Investigation of metal non-opaque foreign bodies of firearm origin by radiation methods

Background. The purpose is to investigate metal non-opaque foreign bodies of firearm origin. Materials and methods. Five cases of removing soft tissue foreign bodies of gunshot origin were investigated, when radiography of the limb soft tissues didn’t detect foreign bodies, but they were removed during the primary surgical wound debridement. X-ray of soft tissue gunshot wounds found no foreign bodies. To study radiographic density, foreign bodies were placed in a foam model with subsequent multislice computed tomography. For spectral analysis of metal foreign bodies, we used wavelengths unconventional for X-ray, which allowed to conduct X-ray fluorescence and X-ray structural studies. Results. Radiographic density of metal foreign bodies ranged from 989 to 2123 HU. Given the different thickness of foreign bodies, from 0.4 to 3.2 mm, the average was 1700 ± 189 HU. The foam had radiographic density of –969 HU with model dimensions of 200 × 100 × 50 mm. When examining samples of foreign bodies, it was found that they are deformed, have different thicknesses. One of the samples is light and smooth on one side, and dark and rough on the other. X-ray fluorescence results: composition on the light side (% by mass): Al — base, Mn — 0.8, Fe — 0.3, Zn — 0.1, Cr — 0.05, Ti — 0.2, corresponding to Al-Mn alloy. The dark side is an oxidized Al-Mn alloy. In the spectrum of the dark side of the sample, the Br-Kα line was detected, which indicates the participation of bromine compounds in the oxidation process. From the smooth side of the sample, the spectrum of this line is not determined. Conclusions. Non-opaque metal foreign bodies of gunshot origin are a rare phenomenon. Metal foreign bodies with low radiographic density are non-ferromagnetic, the use of modern magnetic surgical instruments will not be effective. Visualization of metal foreign bodies, which are not determined by radiography, is possible with the help of multislice computed tomography. The use of the wavelength of primary radiation, which is unconventional for X-ray spectral analysis, and original X-ray optical schemes allows for quantitative determination of the composition and structure of any metal foreign bodies.

Return to Running After Manual Therapy for Chronic 16-year Cremaster Muscle Strain: A Case Study

BACKGROUND: Cremaster muscle strain (CMS) is an uncommon condition characterized by persistent testicular pain without clinical guidelines for conservative care. This case demonstrated how an applied anatomical analysis influenced the framework of care after which the patient had reduced pain and returned to running. CASE PRESENTATION: The 32-year-old man had 16-years of unremitting CMS that began during high school cross-country training. His 5-8/10 intensity pain, aggravated by sexual or physical activity, limited his ability to sit for work >30 minutes or run. Manual therapy to mobilize anatomic structures potentially affecting cremaster muscle function was followed by graded return to running. OUTCOME AND FOLLOW-UP: After 5 sessions, pain intensity had decreased to 0.5/10 at worst, hip flexibility and strength impairments had resolved, and he had returned to running without increased pain. His Chronic Prostatitis Symptom Index score improved from 19/45 to 8/45. DISCUSSION: Anatomical analysis and the organized care framework led to sequenced treatment starting with body structures affecting the cremaster including mobilization of spinal and peripheral joints, and myofascial structures, followed by exercise and neuromotor training. Despite his condition’s chronicity, treatment culminated in return to running. This case informs the differential diagnosis of lumbo-pelvic-hip problems because concurrent CMS may be underreported. JOSPT Cases 2024;4(3):146-152. Epub 2 July 2024. doi:10.2519/josptcases.2024.0007

Multi-objective optimization of vehicle body B-pillar lower joints based on crashworthiness analysis

The joints in an automobile’s body structure are crucial in bearing loads and transmitting stresses, thereby significantly affecting the body’s rigidity. To effectively improve body rigidity and crashworthiness, this study employed a sensitivity analysis to identify the critical joints among the nine joints of a specific sport utility vehicle (SUV) body. Following regulatory requirements, collision simulations were performed, revealing that the joint below the B-pillar exhibited the most significant deformation. Thus, using the material and thickness of the B-pillar’s lower joint as design variables, experimental samples were generated by the design of experiment (DOE). A multi-objective optimization for the B-pillar’s lower joint model was conducted using the response surface method and the simulated annealing algorithm to determine the final optimized solution. The optimization results showed a 9.31% increase in body bending stiffness, an 11.37% increase in torsional stiffness, and reduced intrusion at various points on the B-pillar, effectively enhancing the body’s rigidity and crashworthiness.

Manufacturing and characterization of functionally gradient material from cemented carbide to diamond via filament-based material extrusion 3D printing

Functionally gradient material (FGM) fabricating via additive manufacturing draws great attention on alleviating the abrupt material discontinuity at the interface of different materials. Introducing gradient structure into polycrystalline diamond composites to produce diamond/cemented carbide FGM is an effective method to reduce the residual stress and enhance the bonding strength of diamond layer and cemented carbide substrate. However, achieving a smooth transition of material properties from cemented carbide to diamond is challenging. In this research, diamond/cemented carbide FGM with a well-controlled gradient was manufactured via filament-based material extrusion. Initially, green bodies of diamond/cemented carbide FGM were obtained by printing with customized composite filaments. Subsequently, thermal decomposition characteristic of the printing filament was analyzed by TGA, and the influence of different heating rates during the binder decomposition stage on the morphology and structure of the green bodies was investigated. After debinding, diamond/cemented carbide FGM without flaw was synthesized at 6.5 GPa and 1550℃. Subsequently, microstructure characterization was performed to investigate the distribution characteristics of the materials inside the diamond/cemented carbide FGM. A continuous transition from tungsten carbide to diamond was achieved inside the gradient layer. Furthermore, the stress state of diamond in different positions of the diamond/cemented carbide FGM was analyzed by Raman spectroscopy. It was found that all the residual stresses in the axial interface of the gradient layer were compressive stress, which can prevent occurrence of microcracks resulted from the tensile stresses formed in the interface. Finally, the impact tests reveal that gradient structure is conductive to improving the bond strength between PCD layer and cemented carbide substrate as the impact times before fracture of diamond/cemented carbide FGM has been increased by 15 %. The gradient structure design strategy, generated via the filament-based material extrusion technology, pioneers new ideas to the development of high-performance FGMs in mass production.

Effectiveness of therapeutic interventions on participation in children with cerebral palsy: A systematic review and meta-analysis.

Participation in life activities is an integral part of health and a main outcome of rehabilitation services for children and adolescents with disabilities. However, there is still no consensus on the most effective way to improve participation. The aim of this systematic review is to determine the effectiveness of therapeutic interventions on participation outcomes of children with cerebral palsy (CP). A systematic review was conducted, searching the databases PubMed, Cochrane Library, Science Direct, Web of Science and Scopus for randomized controlled trials (RCTs), between 2001 and 2023. Studies were eligible for inclusion if they evaluated children with CP undergoing any intervention and using any tool measuring participation as an outcome measure. A meta-analysis of treatment effect was conducted. A sensitivity analysis was conducted to identify the effect on participation when intervention targeted different International Classification of Functioning (ICF) domains. A total of 1572 records were identified. Eight RCTs including 384 children (195 in the intervention group and 189 in the control group) were included in the systematic review and in the meta-analysis. A sensitivity analysis showed that interventions focusing on participation significantly improved participation; standardized mean difference (1.83; 95% CI: 1.33-2.32; Z = 7.21; P < 0.00001). When other types of interventions, that is, focusing on body functions and structures or activities, were used, then participation was not favourably affected. Interventions primarily targeting barriers to participation across several ICF domains have a greater influence on enhancing participation. Interventions aimed at enhancing specific motor skills, including gross and fine motor function or strength, do not necessarily have a positive impact on participation.

The Role of the Structure of Matter in its Dynamics and Evolution

The article is devoted to the study of the role of the structure of the body in its dynamics and evolution. A system of potentially interacting material points was used as a body model. To study the role of body structures, the equation of motion of the system was used. It is shown how it is derived from the condition of invariance of the total energy of the system. This equation takes into account that the work of external forces goes not only to change the energy of motion of the system, but also to change its internal energy. As a result, it was found that taking into account the structural nature of bodies opens up the possibility of describing the processes of their evolution within the framework of the fundamental laws of physics. Based on the condition of infinite divisibility of matter, which follows from the equation of motion of the system, the general principles of organizing the structures of matter at all its hierarchical levels are considered. Examples are given that demonstrate the importance of taking into account the role of the structure of bodies for the development of physics.

Comparison of Single Session Auditory Versus Visual Feedback on Performance and Postural Balance in Hemiplegic Children With Cerebral Palsy.

Cerebral palsy (CP) is a pediatric disorder characterized by a motor impairment resulting from a permanent, non-progressive lesion in the brain. Cerebral palsy is marked by movement and postural control impairments, which greatly affect body structure, function, daily activities, and participation. To compare the single-session auditory versus visual feedback on performance and postural balance in children with hemiplegic cerebral palsy. The study was a crossover clinical trialinvolving a group of 25 patients diagnosed with CP hemiplegia, aged between 6 and 12 years, including both genders. Each patient underwent conventional balance therapy followed by either auditory feedback or visual feedback intervention. After a 48-hour wash-out period, they received conventional balance therapy again before undergoing the alternative intervention initially assigned. The Modified Ashworth scale (MAS), pediatric balance scale (PBS), timed one-leg stance, time up and go test (TUG), and center of pressure (CoP) displacements were assessed as the outcome measures before and after the interventions. Based on the one-leg stand test, TUG, and CoP displacement outcome measures results, both interventions improved balance time, speed of movement, and postural stability in children with hemiplegic spastic cerebral palsy (P < 0.05). Moreover, after a single session of the intervention, the visual feedback group demonstrated a significantly greater improvement in the TUG test, one-leg stand test, and CoP displacement compared to the auditory group (P < 0.05). The results of the study suggest that combining auditory or visual feedback with conventional balance therapy is effective in treating children with hemiplegic spastic cerebral palsy; furthermore, the utilization of visual feedback would be more effective. Further research is needed to determine the long-term effects of visual and auditory feedback on the assessed outcome measures.

Reduced tillage intensity does not increase arbuscular mycorrhizal fungal diversity in European long‐term experiments

AbstractMechanical soil disturbance is one among the key factors influencing soil biodiversity in agriculture. Although many soil organisms are sensitive to soil disturbance, fungi could be highly impacted due to their sessile lifestyle, relatively slow growth and filamentous body structure. Arbuscular mycorrhizal (AM) fungi are of particular interest in arable lands, providing crop plants with numerous vital services such as nutrient acquisition and protection against abiotic and biotic stressors. Considering this, tillage practices that aim to reduce soil disturbance are often seen as a fungal‐friendly alternative to conventional inversion tillage. Although local studies exist on the impacts of minimal tillage practices on AM fungi, the universality of this approach has been debated. Our objective was to assess the effects of reduced tillage intensity on AM fungi in comparison with conventional tillage. Using high‐throughput sequencing techniques in long‐term field experiments in five European countries, we show that the effects of reduced tillage intensity may not necessarily be positive on soil AM fungal diversity. Plots which were tilled using reduced tillage techniques had lower AM fungal richness in three countries, whereas in one of them, no significant differences were found. We also observed a shift in AM fungal communities where prevalence of taxa preferring root colonisation rather than soil exploration increased under reduced tillage regimes. Here, we argue that more detailed and long‐term studies are needed to understand the factors that could make the reduction of soil disturbance more beneficial to AM fungi if agricultural sustainability goals are to be met.

Steady-State Thermal Circuit Modeling of a 10 kV Three-core Cable Based on Distributed Structure

Abstract With the development of China’s urbanization construction, the proportion of urban power distribution cables is increasing. The existing models for the temperature calculation of urban medium and low voltage three-core cables regard the filler layer and inner sheath as isothermal body structure for research and analysis, and do not take into account the temperature inhomogeneity characteristics of the three-core cable structure itself. In the paper, the uneven distribution characteristics of the buffer layer of the three-core cable are considered, and then the temperature distribution of the inner sheath is analyzed, and the distributed modeling of the inner sheath is carried out by drawing on the idea of analogous distributed model of the electric circuit, and from the heat flow theory, the heat flux assigned to each segment of the structure such as each inner sheath is derived, and the steady-state thermal circuit model of the three-core cable is established based on the principle of equivalency, and the finite element computation method is adopted to recognize the thermal circuit parameters, and finally, after the simulation results are compared with the simulation results, the temperature of the three-core cable structure itself is considered as an isothermal structure. Finally, after comparing with the simulation results, the accuracy of the thermal circuit model reaches 95%, the change of ambient temperature has less influence on the thermal circuit model, and the model has high robustness, which provides support for the on-line detection technology of the state of three-core cables.

The Body as an Electronic Scheme.

There is no clear evidence that acupuncture points and meridians are separate organs or specific tissues. However, in traditional Chinese medicine, the mechanism of acupuncture action is associated with the vital energy concept. To identify the body's energy source and the material basis of its transmission, transformation, and use, it is necessary to consider it as an energy-generating object, with all its components. By abstracting from the body's usual structural view, we found that it is an autonomous energy-generating object. The human body generates energy through the lungs and digestive tract, which are electrochemical generator organs. Because the generated energy must be transferred to the consumer, the body has wire and transformer analogs. It bears an obvious resemblance with an electronic circuit, where cellular structures, tissues, and their combinations act as electrical and radioelements. The heart, brain, and muscles, which have well-known electrical parameters, as well as acupuncture points, offer information about the state of these electronic circuits. This article describes an extra-organ approach for systematizing body structures. It also attempts to represent the meridians and acupuncture points system as integral electro-radioelements, as well as the local circuit components of the whole body's electronic scheme.

VITAL CAPACITY OF THE LUNGS OF TRAMPOLINE GYMNASTS AGED 10-13

Vital capacity (VC) tests are an important tool in assessing the functioning of the respiratory system. Low levels of vital capacity can indicate health problems such as asthma, chronic obstructive pulmonary disease, and other respiratory conditions. The volume of VC depends on many factors, especially the strength of the respiratory muscles, body and chest structure, lung and chest compliance, airway patency, gender, environmental factors, and physical activity. The aim of this study is to determine the level of vital capacity (VC) in girls and boys aged 10-13 who practice trampoline jumping, and to compare the results with reference values for a given gender and age category. The research was conducted among 100 trampoline jumpers (including 57 girls and 43 boys) aged 10-13. As part of the research, spirometric measurement was performed using the portable EasyOne model 2001 spirometer. The obtained results were then compared to reference values calculated on the basis of a study by the European Respiratory Society. The average level of vital capacity in the girls aged 10 was 2.2 liters, in 11-year-olds - 2.45 l, in 12-year-olds 2.54 l, and in 13-year-olds it was 3.02 l. The average level of vital capacity of the examined boys aged 10 was 2.36 l, in 11-year-olds 2.56 l, in 12-year-olds 2.89 l, and in 13-year-olds 3.33 l. These research results indicate that trampoline jumpers show a VC value within the reference values (between the LLN and ULN values). The girls stand out with higher percentage of predicted values for VC at the age of 11 (95.26%) and 13 (100.34%), in comparison with boys at the age of 10 (96.38%) and 12 (96.23%).

Характеристика сучасного стану іхтіофауни озера Котлован як малої штучної водойми м. Дніпро

Purpose. To investigate the current state of nearshore and pelagic communities of ichthyofauna of an artificial water body: Lake Kotlovan in the city of Dnipro. To develop a set of recommendations and bioreclamation measures to improve and maintain a balanced ecological state of the water body, to increase its recreational value. Methodology.The study of ichthyofauna was carried out in the lake Kotlovan (total area 13.4 hectares), which was artificially created in the late 1960s and 1970s, located in the Industrial District of Dnipro in the area of industrial development. The study was carried out in September 2021 - October 2022 in three main nearshore biotopes of the water body. Ichthyological samples were collected in the nearshore shallow water zone with a small-mesh (fry) seine of 15 meters long with a mesh size of 7 mm in the wings and 3 mm in the codend. Fish selected for further analysis were preserved in a 4.5% formalin solution. Processing and analysis of the collected samples were carried out at the research center “Aquatic Bioresources and Aquaculture” of the Dnipro State Agrarian and Economic University (DSAEU). Generally accepted methods of mathematical analysis were used to process the results. The study was carried out in accordance with the Program for conducting scientific fisheries research of the Scientific Research Center “Aquatic Bioresources and Aquaculture” of the DSAEU for 2022–2026. Findings. The peculiarities of the species composition and distribution of the spontaneously formed ichthyofauna of an artificial water body under the impact of negative factors - discharges of enterprises, communal and household effluents and active recreation - have been established. Ichthyofauna of the lake Kotlovan is impoverished and represented by only 10 species (4 families). The composition of the ichthyofauna lacks bottom-dwelling fish and some littoral species (representatives of the familiesCobitidae, Siluridae, Syngnathidae, Gasterosteidae, Gobiidae), a certain deformation of the taxonomic structure was observed. The absence of individual families of ichthyofauna is an atypical situation for most water bodies in this region. This is due to the artificial development of ichthyofauna and the complex negative effect of the anthropogenic factor and internal trophic relationships. Recommendations on bioreclamation measures for the development of a stable ichthyocenosis with the improvement of the trophic structure and ecological condition of the artificial water body have been developed. Originality. The species composition of the ichthyofauna of an artificially created completely isolated water body in the city of Dnipro, which has existed for about 50 years, was determined for the first time. The current structure of fish groups according to species composition, conservation status, relative abundance, type of feeding and origin were investigated. A high level of the infestation of bleak Alburnus alburnus and silver bream Blicca bjoerkna with ligulosis and perch Perca fluviatilis with eustrongylidosis was observed. Measures and recommendations for improving the state of the ichthyofauna of Lake Kotlovan and increasing the recreational value of the water body were proposed. Practical value. Based on the conducted study, it is possible to evaluate and forecast the future state of the ichthyofauna of small, artificially created and isolated water bodies under anthropogenic pressure. The proposed bioreclamation measures will allow increasing the stability of ichthyocenosis and improving water quality as well as the conditions for recreation of residents, recreational fishing within the boundaries of a large city (a complex of ecosystem services). Keywords: city of Dnipro, artificial water body, ichthyofauna, bioreclamation, biotope, recreation, ecosystem services.

A Novel Method for Analyzing Sandbar Distribution in Shelf-Type Tidal Deltas Using Sediment Dynamic Simulation

Shallow marine shelf sedimentation is a hot and difficult topic in today’s reservoir sedimentology research, and it is widely present in the world. The shallow marine shelf sedimentation is not only affected by complex hydrodynamic effects such as tides and waves, but also controlled by bottom tectonic features, forming a complex and varied sedimentation pattern. During the Middle Jurassic period, the northern part of West Siberian Basin was characterized by a shallow marine shelf sedimentary environment. In the central reion of this basin, a typical tectonic uplift zone developed, forming a tectonic background of “one uplift zone between two depressions”. Simultaneously, the dominant influence of tides in the shallow marine shelf environment facilitated the formation of a typical shelf-type tidal delta sedimentation system in the Jurassic strata of the northern part of West Siberian Basin. This sedimentation constitutes a significant natural gas reservoir, and it is important to investigate the sedimentary evolution of shelf-type tidal deltas and to clarify the internal structure and distribution of sedimentary sand bodies and interlayers in shelf-type tidal deltas, which is the basis for the fine development of this type of reservoir. This paper takes the Jurassic strata in the Y region of northern part of West Siberian Basin as the research object, and conducts numerical simulation based on sedimentary dynamics for the shelf-type tidal delta sedimentation formed under the tectonic background of “one uplift zone between two depressions”. In addition, tidal amplitude and initial water level were selected for different hydrodynamic factors to study the main controlling factors of shelf-type tidal delta sedimentation. The simulation results show that tidal amplitude is positively correlated with three-dimensional configuration characteristic parameters of the sedimentary sand bodies, and the development of tidal bars becomes more and more limited as the initial water level increases. This paper systematically investigates the sedimentary evolution of shelf-type tidal delta under the tectonic background of “one uplift zone between two depressions” by the sedimentary dynamics method, which deepens the understanding of the shelf-type tidal delta sedimentation process and provides a new thinking for the development of this sedimentary reservoir type (School of Geosciences China University of Petroleum (East China)).

Характеристика маточного стада несвицького внутрішньопородного типу українських рамчастої та лускатої порід коропа за комплексом продуктивних та репродуктивних показників

Purpose. To provide an assessment of the complex of productive and reproductive parameters of the brood stock of the Nesvych intrabreed type of Ukrainian framed and scaly breeds of carp grown in pond conditions of the Polissia zone. Methodology. The study was conducted at fish farms of Lviv and Volyn regions of Ukraine during 2004-2024. The material for the study was sexually mature carps of the Nesvych type of different ages. The main fish productive and biological parameters were studied during spring valuation according to generally accepted methods in fish farming. Exterior evaluation was carried out according to weight and the main parameters of body structure. Measurements were made with a centimeter tape with an accuracy of 1 mm. Individual weighing of older age groups was carried out on electronic scales PROK VT-150-R1, juveniles - TS-500. Based on the results of the measurements, the main exterior parameters were analyzed and determined — girth, body length to height ratio, head length. The ejaculate volume was determined using an Eppendorf pipette-dispenser with an accuracy of 0.1 cm3. Sperm movement activity was determined using a Zeiss Axiostar plus microscope with a 20x/0.40 phase-contrast objective. The number of spermatozoa in cm3 was calculated using a Macler camera. Calculation of the absolute working fertility was carried out by the weight method, with the calculation of the number of eggs in 1 g and the subsequent determination of the weight of 1 egg. Relative working fertility was defined as the ratio of working fertility to body weight. Findings. The study showed that carps of the Nesvych intrabreed type had exterior parametetrs typical for Ukrainian carp breeds. At the same time, the working fertility of first-time spawning females was in the range of 328.1 - 522.7 thousand eggs, age 6-8 females - 645.7 - 1178.3 thousand eggs, older age groups - 536.2 – 1014.0 thousand eggs. With the average ejaculate volume of 7.6 – 8.3 cm3 in first-spawning males and re-spawning ones 14.9 – 21.3 cm3, active movement of spermatozoa after their activation was observed: 33.1 – 48.6 s and 56.3 - 59.3 s, respectively. At the same time, the working fertility of males was 90.1 - 443.2 billion spermatozoa. The positive response of female Nesvych carp to pituitary stimulation exceeded 95%. Originality. The results of 20 years of selective-breeding work with a representative of aquaculture in the western region of Ukraine are highlighted. In particular, weight dynamics, main exterior and reproductive parameters of brood fish of different ages of brood carp stock of Nesvych intrabreed type of Ukrainian framed and scaly breeds, which were presented and successfully passed the state approval in 2023, are summarized. Practical value. High fish productive and biological parameters of broodstocks of the Nesvych inbred type allow recommending them for use for the purpose of commercial cultivation. Key words: Nesvych carp, intrabreed type, brood stock, exterior, weight, age groups, condition factor fertility, ejaculate volume.

Experimental study on failure mechanism of soft rock-coal bodies in abandoned mines under cyclic dynamic loading

During the construction and operation of a pumped storage power station in an abandoned mine, the soft rock-coal body structure, comprising the roof and the residual coal pillars, encounters a complex stress environment characterized by cyclic loads. The study of its failure mechanism under cyclic dynamic loading holds significant theoretical and practical importance to stay the safety and stability of the abandoned mine pumped storage power station. In this paper, we take “roof-residual coal pillar” soft rock-coal combinations with different percentages of rock as the research object, and study their mechanical properties, failure mechanism, energy evolution characteristics and acoustic emission distribution characteristics through cyclic dynamic loading experiments. The results of the experiment indicate that: (1) Both weak cyclic dynamic loading and high rock percentage enhance the deformation resistance of soft rock-coal combinations. Under low-disturbance horizontal cyclic loading, its peak strength and modulus of elasticity increase with increasing rock percentage. (2) Under low-disturbance horizontal cyclic loading, an increasing trend is observed in the average total strain energy density, dissipation energy density, and elastic energy density of the combinations as the percentage of rock increases. (3) Under low-disturbance horizontal cyclic loading, as the percentage of rock increases in the soft rock-coal combinations, the degree of failure in the rock body part progressively intensifies, while the destruction of the coal portion progressively decreases. (4) The large number of acoustic emission signals are generated at the instant of destabilization and destruction of the coal-rock combinations, mainly dominated by the signals generated by the destruction of the coal body. Acoustic emission counts and absolute energy at key point N2 decrease as the percentage of rock increases. The b value is primarily distributed in the cyclic dynamic loading stage and the failure stage, both displaying zones of sudden increase and sudden decrease in b value.