Blue Shift Research Articles

Bio-ultrasonic synthesis of tin oxide quantum dots: Effect of bio-carbon and their UV Photocatalytic activity

Abstract An ecofriendly synthesis is realized to elaborate tin oxide quantum dots (SnO2 -QDs) using the plant aqueous extract of Aloe Barbadensis Miller (Aloe Vera) and SnCl4.5H2O at room temperature as a biological solvent and a precursor respectively. The effect of Aloe Vera extract concentration on the properties of SnO2-QDs has been studied. Morphological and structural properties of the as synthesized nanoparticles have been characterized using field effect-scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). The chemical composition of the nanoparticles was studied by Raman, energy dispersive X-ray (EDX) and Fourier transformation infra-red (FTIR) spectroscopy. The optical properties were investigated by UV–Vis spectrophotometer. The X-ray diffraction analysis showed that all samples have a tetragonal rutile structure, with an estimated crystal size closed to the exciton Bohr radius, indicating a strong confinement of the carriers in the material. The crystallite size of SnO2-QDs nanoparticles decreases as Aloe Vera plant extract concentration increases. The formation of SnO2-QDs and the presence of graphitic carbon in samples were confirmed by Raman spectroscopy, EDX analysis and Fourier transformation infra-red (FTIR) spectroscopy. The blue shift of absorption is the most likely attributed to the quantum confinement effect. An Ostwald-repining growth model based on the concept of surface energy has been proposed to explain the kinetic growth of SnO2 QDs. The improvement of photocatalytic activity of the photocatalyst for degradation of methylene blue (MB) might be caused by the size and the high surface area of the material.

Enhanced optical and electrochemical properties of FeBTC MOF modified TiO2 photoanode for DSSCs application

In this work, iron based 1, 3, 5-tricarboxylic acid (FeBTC) was prepared via microwave-assisted method and incorporated into TiO2 via ultrasonic assisted method. The TiO2–FeBTC nanocomposites were characterized by XRD, FTIR, Raman, BET, FESEM, HRTEM, TGA, UV‒vis DRS and PL to understand their crystallographic, surface morphology, and optical characteristics. The Raman spectra showed a blue shift of Eg, A1g, and B1g peaks upon incorporation of FeBTC MOF onto TiO2. HRTEM and XRD analysis confirmed a mixture of TiO2 nanospheres and hexagonal FeBTC MOF morphologies with high crystallinity. The incorporation of FeBTC onto TiO2 improved the surface area as confirmed by BET results, which resulted in improved absorption in the visible region as a results of reduced bandgap energy from 3.2 to 2.84 eV. The PL results showed a reduced intensity for TiO2–FeBTC (6%) sample, indicating improved separation of electron hole pairs and reduced recombination rate. After fabrication of the TiO2–FeBTC MOF photoanode, the charge transfer kinetics were enhanced at TiO2–FeBTC MOF (6%) with Rp value of 966 Ω, as given by EIS studies. This led to high performance due to low charge resistance. Hence, high power conversion efficiency (PCE) value of 0.538% for TiO2–FeBTC (6%) was achieved, in comparison with other loadings. This was attributed to a relatively high surface area which allowed more charge shuttling and thus better electrical response. Conversely, upon increasing the FeBTC MOF loading to 8%, significant reduction in efficiency (0.478%) was obtained, which was attributed to sluggish charge transfer and fast electron–hole pair recombination rate. The TiO2–FeBTC (6%) may be a good candidate for use in DSSCs as a photoanode materials for improved efficiency.

Impact of nuclear effects on the ultrafast dynamics of an organic/inorganic mixed-dimensional interface

Abstract Electron dynamics at weakly bound interfaces of organic/inorganic materials are easily influenced by large-amplitude nuclear motion. In this work, we investigate the effects of different approximations to the equilibrium nuclear distributions on the ultrafast charge-carrier dynamics of a laser-excited hybrid organic/inorganic interface. By considering a prototypical system consisting of pyrene physisorbed on a MoSe2 monolayer, we analyze linear absorption spectra, electronic density currents, and charge-transfer dynamics induced by a femtosecond pulse in resonance with the frontier-orbital transition in the molecule. The calculations are based on \textit{ab initio} molecular dynamics with classical and quantum thermostats, followed by time-dependent density-functional theory coupled to multi-trajectory Ehrenfest dynamics. We impinge the system with a femtosecond (fs) pulse of a few hundred GW/cm2 intensity and propagate it for 100 fs. We find that the optical spectrum is insensitive to different nuclear distributions in the energy range dominated by the excitations localized on the monolayer. The pyrene resonance, in contrast, shows a small blue shift at finite temperatures, hinting at an electron-phonon-induced vibrational-level renormalization. The electronic current density following the excitation is affected by classical and quantum nuclear sampling through suppression of beating patterns and faster decay times. Interestingly, finite temperature leads to a longer stability of the ultrafast charge transfer after excitation. Overall, the results show that the ultrafast charge-carrier dynamics are dominated by electronic rather than by nuclear effects at the field strengths and time scales considered in this work.

Two-photon absorption in quantum dots with Hellmann potential

Abstract We study the nonlinear optical absorption properties of a spherical quantum dot with Hellmann potential, focusing on the two-photon absorption (TPA) process, using GaAs/AlGaAs material as an example. { The radial Schr"{o}dinger equation is solved using the Nikiforov-Uvarov method, while the two-photon absorption coefficient is determined through second-order perturbation theory concerning the electron-photon interaction}. Our study shows that the intraband transition has a smaller energy transition than the interband transition, leading to TPA spectra for the intraband transition that is restricted within a smaller energy range and exhibits a higher peak value than those for the interband transition. The peak corresponding to $\ell=2$ consistently appears to the left of the peak corresponding to $\ell=1$ in both intraband and interband transition cases. Additionally, the dependence of the absorption peak position on the order of transition, $n$, differs between intra- and inter-band transitions. We also observe blue shift behavior in the TPA spectra as all three parameters, $r_0$, $V_{0e}$, and $\eta$, increase. Our investigation has the potential to enable the design of novel photonic devices, ultra-fast optical switches, and highly efficient solar cells through the optimization of quantum dot material properties.

One-dimensional photonic crystals based on porous anodic alumina: Optical and morphology changes under thermal and chemical treatments

One-dimensional photonic crystals (1D PCs) based on porous anodic aluminium oxide (AAO) are promising for light manipulation and sensing. As-prepared AAO, being amorphous material, suffers degradation in acidic and alkaline media. It is commonly known that the chemical stability of AAO increases drastically after thermal treatment. Here, the effect of annealing up to 1200 °C on the morphology and the optical properties of AAO PCs is studied. The two-step crystallization of as-prepared AAO at 860 and 1190 °C leads to a two-step blue shift of the central wavelength of photonic band gap (PBG) and the decrease in PBG depth, whereas the Q-factor of the PBG enhances. The observed changes in optical transmittance spectra of PCs are mainly attributed to the increase in pore diameter, the formation of crystalline particles of alumina polymorphs, and the removal of impurities. Annealed AAO PCs demonstrate much higher stability of optical parameters during exposure in acidic media compared to the as-prepared ones. Thermal treatment at 600 °C results in 30% decrease in the rate of the PBG shift during chemical etching. Furthermore, AAO crystallization into a mixture of low-temperature alumina polymorphs at 860 °C leads in a negligible change in transmittance spectra even after chemical etching in 1 M HCl for 75 h. The excellent stability achieved for the annealed AAO PCs in aggressive media proves the perspectives of their application as the optical sensors with long-term stability.

Thiourea Functionalised Receptor for Selective Detection of Mercury Ions and its Application in Serum Sample.

A thiourea functionalised fluorescent probe 1-phenyl-3-(pyridin-4-yl)thiourea was synthesized and utilised as a fluorescent turn-on chemosensor for the selective recognition of Hg2+ ion over competitive metal ions including Na+, Mn2+, Li+, Cr2+, Ni2+, Ca2+, Cd2+, Mg2+, K+, Co2+, Cu2+, Zn2+, Al3+ and Fe2+ ions based on the inter-molecular charge transfer (ICT). Intriguingly, the receptor demonstrated unique sensing capabilities for Hg2+ in DMSO: H2O (10:90, v/v). The addition of Hg2+ ions to the sensor resulted in a blue shift in the absorption intensity and also enhancement in fluorescence intensity at 435nm. Fluorescence emission intensity increased linearly with Hg2+ concentration ranging from 0 to 80 µL. The detection limit and binding constant were determined as 0.134 × 10-6M and 1.733 × 107M-1, respectively. The sensing behavior of Hg2+ was further examined using DLS, SEM and FTIR. The probe could detect Hg2+ ions across a wide pH range. Furthermore, the receptor L demonstrated good sensing performance for Hg2+ in bovine serum albumin and actual water samples.

Observations on “Mg” incorporated oxides of tungsten for superconducting applications

The present work involves in the synthesis and characterization of pristine and "Mg" associated WO3.H2O nano powders by a high yield irradiation technique using microwaves. The diffraction patterns present phased orthorhombic phase and retained even after annealing process. Clear evidence noticed for pure and doped samples in morphological behavior of the samples. The change in optical properties in terms of energy values revealed the contribution of dopants with the evident at 360 nm wavelength blue shift. The obtained magnetic behavior on the annealed samples revealed the transition offer magnetic state to diamagnetic state may be investigated for super conducting applications.

Photocatalytic dye degradation, H2 evolution, electrical and mechanical performances of mechano-synthesized multifunctional Bi2Te3 nanoparticles: Effect of milling time and thermal treatment

Bi2Te3 nanoparticles are synthesized by mechanical alloying the Bi and Te powders under the Ar and pressed powdered samples are sintered at 573 K. Rietveld refined XRD patterns, FESEM images and EDX spectra reveal the microstructure, morphology and phase purity of the samples. Bandgaps are obtained from the FTIR spectra and a blue shift with size reduction indicates the size confinement effect. The non Debye type ac conductivity and dielectric constant variations with milling time and sintering are measured. The improved photocatalytic degradation efficiency of the sintered sample (83.59 %) using Rhodamine B dye under visible light elucidates reduced porosity effect. The photocatalytic hydrogen evolution efficiencies of these nanoparticles are measured and a probable mechanism is depicted. The highest H2 generation efficiency (1462.5 μmol g−1h−1) is observed with the sintered sample. Microhardness measurement reveals normal indentation size effect. Empirical correlations among electrical conductivity, microhardness and photodegradation are established for the first time.

A Ratiometric Green Fluorescent Carbazole-bis(hydrazinobenzothiazole) Probe for the Selective Detection of Toxic Hg2+ Ions in Real Water Samples.

A dyad Carbazolyl-bis(hydrazinobenzothiazole) was designed to form a symmetrical structure that containing two-arm active binding sites facilitates coordination with Hg2+ ion. This sensor has imparted a colorimetric and fluorometric changes in presence of Hg2+ ions. The ligand showed a selective blue shift in presence of Hg2+even in co-existence with heavy metal ions with luminescence change from colorless to blue and colorless to green under day light. Enhanced Intramolecular charge transfer process is responsible for fluorescence transformation when ligand interacts with Hg2+ ion. The emission spectra showed a ratiometric response to increasing addition of Hg2+ ions. The sensor is capable of detecting above the lower concentration of 6.8025 × 10-8 M. The fluorescence efficiency of CBT-2 with Hg2+ ion is quite stable under different co-metal ions and wide range of pH 6 to 9. The sensor CBT-2 forms a 1:1 stoichiometric complex with Hg2+ ions and the binding nature is confirmed from the 1H-NMR, FTIR, and mass spectroscopic studies. The sensor CBT-2 and its Hg2+ complex possess good binding nature to protein in Bovine Serum Albumin which could be good in biological applications. Additionally, wedevelop a practical application in real water sample analysis and electrochemical detection viaoxidation potential discrimination.

Catalyst-regulated conversion of p-phenylenediamine-based carbon dots from red to deep-blue emission

Deep-blue emission (＜450 nm) is significant in high-density information storage, solid-state lighting, and vivid displays. However, the carbon dots (CDs) obtained from p-phenylenediamine (pPD) have only red fluorescence, which greatly limits the application and development of pPD-based CDs. As we all know, a catalyst is a substance that can change the rate and pathway of a chemical reaction. Herein, we designed to add a catalyst to realize the conversion of pPD-based CDs from red to deep-blue fluorescence. The emission peak of obtained deep-blue CDs was 440 nm, and the full-width at half-maximum (FWHM) was only 58 nm, with a high color purity. In addition, through in-depth analysis of microstructure and photoluminescence (PL) properties, it is found that the decrease of the sp2-conjugated domain and the graphite N content and the increase in pyridinic N content were the main reasons for the blue shift of the spectra. Based on this, the formation process and mechanism of red and deep-blue CDs were further elucidated. This work not only efficiently realized the design of the deep-blue CDs but also provided a new idea for the luminescence regulation of CDs without changing the raw materials and reaction conditions.

Disentangling Acid-Base Chemistry through Blue Shifting Hydrogen Bond Contributions.

The blue shifting of vibrational frequencies in hydrogen bonded molecules, as observed in aqueous environments, has been attributed to local partial charge transfer from solvation. Here, we extrapolate the blue shift model to the stronger ionic interactions between hydrogen bond acceptors associated with protonation through augmented pH levels and competitive interactions with counter ion pairing. The chemical model we utilize in this work is the aqueous pyridine-pyridinium equilibrium to characterize the blue shifts observed in the pyridinium chloride ionic system. The observed agreement between observed experimental and calculated spectral shifts shows that the blue shifting model can be extrapolated to stronger interactions and accurately describe the nature of the hydrogen bond.

Molecular Hydrogen Acts as a Hydrogen Bond Proton Acceptor: From Protonated Betaine Tagging to the Weakest Hydrogen Bond.

In an attempt to gain further insights into the intermolecular interactions implied by Rizzo's group's cautionary tale related to molecular tagging in infrared multiple photon dissociation (IRMPD) spectroscopy with molecular messengers [Masson, A. . J. Chem. Phys. 2015, 143, 104313], in the present study, we provide an in-depth analysis of the noncovalent interaction between the molecular hydrogen and protonated betaine molecule in the gas phase. We aim to shed some new light on the fundamental issues concerning the wide diapason of hydrogen-bonding-type intermolecular interactions, with a wide variety of proton acceptors. We demonstrate that in the course of tagging the protonated betaine with molecular hydrogen from the OH group side, it is the σ bond of molecular hydrogen that plays the role of hydrogen-bonding proton acceptor. The tagging thus induces a small yet significant red shift of the protonated betaine O-H stretching mode. We investigate the performance of a wide range of density functional theory (DFT) functionals for the calculation of anharmonic vibrational frequency shifts of the studied system, which are essential for the correct interpretation of the experimental IRMPD data. For an accurate prediction of the OH stretching frequency shifts, specifically designed functionals such as Handy's group HCTH/407 should be applied. The empirical dispersion correction enhances the systematic overestimation of the anharmonic frequency shift, characteristic of the most widely used DFT functionals. Combining the full-wave function approach with the charge field perturbation and natural bond orbital (NBO) deletion analyses, we demonstrate that the frequency shift in the OH-tagged structure is governed by the σHH → σ*OH intermolecular charge transfer. This interaction stabilizes the OH-tagged dimer as well, in contrast to the dipole-quadrupole electrostatic interaction energy term. Topological analysis of the electron density reveals the presence of an intermolecular bond critical point with a positive value of the density Laplacian very close to the lower limit for hydrogen bonds. NCI analyses demonstrate that the OH···H2 interaction is weaker than the intramolecular CH···O one within the protonated betaine molecule, with the through of reduced density gradient appearing at less negative sign(λ2)·ρ values. Analyzing the O-H stretching vibrational potential with the second-generation absolutely localized molecular orbitals energy decomposition analysis (ALMO-EDA 2) revealed that in the case of betaineH(+) tagged from the OH group side, the permanent electrostatics (ΔEelec), polarization (ΔEpol), and charge-transfer (ΔEct) contributions to the total intermolecular interaction energy contribute favorably to the weak hydrogen bond formation and to the red shift of the fundamental O-H stretching frequency, the ΔEct contribution being the most significant in the last context. The Pauli repulsion term, on the other hand, favors an O-H stretching frequency blue shift as a consequence of the vibrational confinement effects.

Synthesis and thermally-induced gelation of interpenetrating nanogels

Thermally-induced in-situ gelation of polymers and nanogels is of significant importance for injectable non-invasive tissue engineering and delivery systems of drug delivery system. In this study, we for the first time demonstrated that the interpenetrating (IPN) nanogel with two networks of poly (N-isopropylacrylamide) (PNIPAM) and poly (N-Acryloyl-l-phenylalanine) (PAphe) underwent a reversible temperature-triggered sol-gel transition and formed a structural color gel above the phase transition temperature (Tp). Dynamic light scattering (DLS) studies confirmed that the Tp of IPN nanogels are the same as that of PNIPAM, independent of Aphe content of the IPN nanogels at pH of 6.5 ∼ 7.4. The rheological and optical properties of IPN nanogels during sol-gel transition were studied by rheometer and optical fiber spectroscopy. The results showed that the gelation time of the hydrogel photonic crystals assembled by IPN nanogel was affected by temperature, PAphe composition, concentration, and sequence of interpenetration. As the temperature rose above the Tp, the Bragg reflection peak of IPN nanogels exhibited blue shift due to the shrinkage of IPN nanogels. In addition, these colored IPN nanogels demonstrated good injectability and had no obvious cytotoxicity. These IPN nanogels will open an avenue to the preparation and thermally-induced in-situ gelation of novel NIPAM-based nanogel system.

THE DEPENDENCE OF ACID-BASE EQUILBRIA AND ACIDITY CONSTANTS OF CONGO RED IN BUFFER SOLUTIONS ON THE IONIC STRENGTH

In this study, the spectrophotometric studies of aqueous ethanol solution of Congo red in various buffers solutions at room temperature 25oC and at different ionic strength of 0.05, 0.1, 0.3, and 0.5 KCl mol L-1 were investigated. The acidity constants of Congo red were estimated by three different methods. The two protonation stages were observed in pH range 2 - 4 and 4 - 6 as result as protonation of amino group and azo groups. The dependence of absorption spectra of Congo red on the ionic strength of solutions which exhibited blue shift with increases ionic strength in addition the shape and intensity were varied. Therefore, the acid-base equilibria shifted toward the higher pHs with the rise in ionic strength. Also, the acidity constants were affected by the ionic strength which the acidity constants decrease with increasing ionic strength of solution because the electrostatic interaction force increased.

Structure Engineering of Acridine Donor to Optimize Color Purity of Blue Thermally Activated Delayed Fluorescence Emitters.

9,9-Dimethyl-9,10-dihydroacridine (DMAC) is one of the most widely used electron donor for constructing high-performance thermally activated delayed fluorescence (TADF) emitters. However, DMAC-based emitters often suffer from the imperfect color purity, particularly in blue emitters, due to its strong electron-donating capability. To modulate donor strength, 2,7-F-Ph-DMAC and 2,7-CF3-Ph-DMAC were designed by introducing the electron-withdrawing 2-fluorophenyl and 2-(trifluoromethyl)phenyl at the 2,7-positions of DMAC. These donors were used, in combination with 2,4,6-triphenyl-1,3,5-triazine (TRZ) acceptor, to develop novel TADF emitters 2,7-F-Ph-DMAC-TRZ and 2,7-CF3-Ph-DMAC-TRZ. Compared to the F- or CF3-free reference emitter, both two emitters showed hypsochromic effect in fluorescence and comparable photoluminescence quantum yields without sacrificing the reverse intersystem crossing rate constants. In particular, 2,7-CF3-Ph-DMAC-TRZ based OLED exhibited a blue shift by up to 39 nm and significantly improved Commission International de l'Éclairage (CIE) coordinates from (0.36, 0.55) to (0.22, 0.41), while the external quantum efficiency kept stable at about 22.5%. This donor engineering strategy should be valid for improving the color purity of large amount of acridine based TADF emitters. It can be predicted that pure blue TADF emitters should be feasible if these F- or CF3-modifed acridine donors are combined with other weaker electron acceptors.

Polymer Passivated All Inorganic Micro‐Structured CsPbIxBry Perovskite Toward Highly Efficient Photodetectors

AbstractSolution‐processed inorganic perovskites cause chemical and structural defects unfavorable for photodetector application. Using a binary solvent, defects in CsPbIxBry (CPIB) perovskite are passivated with poly 4‐vinylpyridine (PVP) and Poly methyl methacrylate (PMMA) polymers. X‐ray photoelectron spectroscopy and FTIR spectra reveal a Lewis base‐acid interaction between Pb2+ and polymer, confirming the passivation of CPIB perovskite. Scanning electron microscopy analysis shows a dual‐surface morphology with microribbons and microcrystals in perovskites. After PMMA treatment, CPIB perovskite exhibits a blue shift in the bandgap (1.8 to 1.95 eV), while the PVP induced a redshift, reducing the bandgap to 1.7 eV. Blue shift in PL analysis indicates modification of grain boundaries. A higher lifetime obtained for CPIB/PVP confirms the restraint of non‐radiative recombinations. Photodetectors are fabricated with pristine CPIB, CPIB/PVP, and CPIB/PMMA perovskites. The passivated CPIB/PVP‐based photodetector exhibits a quick rise time of ≈23 ms and a decay time of ≈17 ms. It also demonstrates a remarkable photoresponsivity of 23 mA W−1, an internal quantum efficiency of 4.9%, and a detectivity of 15.0 × 1010 Jones at 10 mW cm−2 light intensity. This approach shows the potential for environmentally stable polymers to passivate inorganic perovskites for high photodetection performance.

Investigation of electrochemical and photoluminescence properties of Dy[formula omitted] doped SrO/BaO/Al2O3 nanocomposite for supercapacitor and display applications

The current study investigates the synthesis and characterization of dysprosium-doped strontium barium aluminum nanocomposites (SBAD NCs), aiming to enhance their suitability for display and supercapacitor applications. SBAD NCs are synthesized by Solution combustion synthesis using aloevera extract as a reducing agent. Multi-phase formation of NCs due to SrO, BaO, and γ-Al2O3 phases was confirmed by PXRD analysis, and crystallite size is found to be in the range of 26 nm to 36 nm. SEM analysis confirmed the surface morphology and the elemental composition was affirmed by the EDAX spectrum which confirmed the purity of the synthesis. The blue shift in the UV–visible absorption peak with increasing dopant concentration suggests a rise in the direct energy band gap from 4.07 eV to 4.11 eV. FTIR analysis confirmed functional groups and fingerprint region affirmed the presence of SrO, BaO, and AlO bonds. Photoluminescence analysis performed under excitation wavelength 276 nm revealed a prominent emission peak at 565 nm, and the CIE values fall in the yellow-green region of visible spectra. The CCT value was found to be 4490 K–4542 K which might find an application as a nanophosphor in cool light-emitting diodes. The tailored nanocomposites exhibit exceptional electrochemical performance characterized by superior specific capacitance, and improved charge–discharge kinetics, as evaluated through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The specific capacitance is found to be in the range of 103.26 F/g to 173.24 F/g at a scan rate of 10 mV/s with increasing Dy3+ dopant concentration from 1 mol% to 9 mol% respectively. The dysprosium-doped SBAD NCs emerge as promising candidates for high-performance energy storage systems and vibrant display technologies, offering a synergistic integration of efficient energy storage and vivid display functionalities.

Impact of blue-shifted effective joint density of electronic states on the photoluminescence of nanostructured silicon

Light emission from nanostructured silicon has triggered tremendous research interest for three decades. Yet, the exact mechanism of photoluminescence from silicon-based nano-systems is still not completely understood. It is generally believed that quantum confinement and surface chemistry play a combined role in determining the luminescence characteristics on nano silicon. In this work, we show that the evolution of electron-hole effective joint density of states, resulting from the relaxation of k-selection rule, can account for the much-observed temperature dependent shift of the luminescence spectra of nanostructured silicon. Deconvolution of the emission characteristics reveals three distinct radiative recombination channels that can be attributed to band-to-band, band-to-trap and trap-to-trap transitions. At temperatures below ∼200 K, the peak due to band-to-band transition exhibit a nearly linear blue shift with increasing temperature while at higher temperatures this trend is reversed. The rate of variation of emission peak energy with temperature is also found to be dependent on average crystallite size. These results are explained in terms of shift in the effective joint density of state function of photogenerated electron-hole pairs. The shift provides experimental evidence of the pseudo-direct transitions in the quantum-confined nanostructure of silicon.

Multiple dyes applications for fluorescent convertible polymer capsules as macrophages tracking labels

Tracing individual cell pathways among the whole population is crucial for understanding their behavior, cell communication, migration dynamics, and fate. Optical labeling is one approach for tracing individual cells, but it typically requires genetic modification to induce the generation of photoconvertible proteins. Nevertheless, this approach has limitations and is not applicable to certain cell types. For instance, genetic modification often leads to the death of macrophages. This study aims to develop an alternative method for labeling macrophages by utilizing photoconvertible micron-sized capsules capable of easy internalization and prolonged retention within cells. Thermal treatment in a polyvinyl alcohol gel medium is employed for the scalable synthesis of capsules with a wide range of fluorescent dyes, including rhodamine 6G, pyronin B, fluorescein, acridine yellow, acridine orange, thiazine red, and previously reported rhodamine B. The fluorescence brightness, photostability, and photoconversion ability of the capsules are evaluated using confocal laser scanning microscopy. Viability, uptake, mobility, and photoconversion studies are conducted on RAW 264.7 and bone marrow-derived macrophages, serving as model cell lines. The production yield of the capsules is increased due to the use of polyvinyl alcohol gel, eliminating the need for conventional filtration steps. Capsules entrapping rhodamine B and rhodamine 6G meet all requirements for intracellular use in individual cell tracking. Mass spectrometry analysis reveals a sequence of deethylation steps that result in blue shifts in the dye spectra upon irradiation. Cellular studies on macrophages demonstrate robust uptake of the capsules. The capsules exhibit minimal cytotoxicity and have a negligible impact on cell motility. The successful photoconversion of RhB-containing capsules within cells highlights their potential as alternatives to photoconvertible proteins for individual cell labeling, with promising applications in personalized medicine.

Investigating a batch-flow photocatalytic LED system for diclofenac removal in wastewater treatment plants: Assessing the influence of reaction conditions on photocatalytic efficiency

This work introduces an innovative batch-flow photocatalytic LED system aimed at efficiently removing diclofenac from wastewater. The study highlights the novelty of fabricating TiO2-loaded carbon fiber photocatalysts through a hydrothermal process, exhibiting a blue shift in their absorption spectrum and enhancing their photon absorption capability. A crucial design feature is the spectral matching between the LED light source and the photocatalyst, which is critical for achieving high photodegradation efficiency. A significant innovation of our study is the testing of the system under real conditions at an operational sewage treatment plant. Here, the designed system demonstrated high efficacy in degrading diclofenac across various treatment stages, highlighting its robustness and adaptability to changing environmental conditions. The highest degradation efficiency was achieved with sewage from the secondary settling tank, where nearly 90 % efficiency was observed after 6 h of irradiation. Moreover, the use of renewable energy sources emphasizes the system's sustainability, presenting a greener alternative to traditional wastewater treatment methods. The investigation not only showcases the system's effectiveness in diclofenac degradation but also its adaptability and stability under real-world conditions, marking a significant advancement in sustainable wastewater treatment technologies.