Biomechanical Effects Research Articles

Role of midsole hollow structure in energy storage and return in running shoes

Understanding the relationship between footwear features and their potential influence on running performance can inform the ongoing innovation of running footwear, aimed at pushing the limits of humans. A notable shoe feature is hollow structures, where an empty space is created in the midsole. Presently, the potential biomechanical effect of the hollow structures on running performance remains unknown. We investigated the role of hollow structures through quantifying the magnitude and timing of foot and footwear work. Sixteen male rearfoot runners participated in an overground running study in three shoe conditions: (a) a shoe with a hollow structure in the forefoot midsole (FFHS), (b) the same shoe without any hollow structure (Filled-FFHS) and (c) a shoe with a hollow structure in the midfoot midsole (MFHS). Distal rearfoot power was used to quantify the net power generated by foot and footwear together. The magnitude and timing of distal rearfoot work and ankle joint work were compared across shoe conditions. The results indicated that MFHS can significantly (p = 0.024) delay distal rearfoot energy return (3.4 % of stance) when compared to Filled-FFHS. Additionally, FFHS had the greatest positive (0.425 J/kg) and negative (−0.383 J/kg) distal rearfoot work, and the smallest positive (0.503 J/kg) and negative (−0.477 J/kg) ankle joint work among the three conditions. This showed that the size and location of the midsole hollow structure can affect timing and magnitude of energy storage and return. The forefoot hollow shoe feature can effectively increase distal rearfoot work and reduce ankle joint work during running.

Evaluation of Biomechanical and Mental Workload During Human-Robot Collaborative Pollination Task.

The purpose of this study is to identify the potential biomechanical and cognitive workload effects induced by human robot collaborative pollination task, how additional cues and reliability of the robot influence these effects and whether interacting with the robot influences the participant's anxiety and attitude towards robots. Human-Robot Collaboration (HRC) could be used to alleviate pollinator shortages and robot performance issues. However, the effects of HRC for this setting have not been investigated. Sixteen participants were recruited. Four HRC modes, no cue, with cue, unreliable, and manual control were included. Three categories of dependent variables were measured: (1) spine kinematics (L5/S1, L1/T12, and T1/C7), (2) pupillary activation data, and (3) subjective measures such as perceived workload, robot-related anxiety, and negative attitudes towards robotics. HRC reduced anxiety towards the cobot, decreased joint angles and angular velocity for the L5/S1 and L1/T12 joints, and reduced pupil dilation, with the "with cue" mode producing the lowest values. However, unreliability was detrimental to these gains. In addition, HRC resulted in a higher flexion angle for the neck (i.e., T1/C7). HRC reduced the physical and mental workload during the simulated pollination task. Benefits of the additional cue were minimal compared to no cues. The increased joint angle in the neck and unreliability affecting lower and mid back joint angles and workload requires further investigation. These findings could be used to inform design decisions for HRC frameworks for agricultural applications that are cognizant of the different effects induced by HRC.

Biomechanical Comparison of Different Surgical Strategies for Skip-level Cervical Degenerative Disc Disease: A Finite Element Study.

We constructed finite element (FE) models of the cervical spine consisting of C2-C7 and predicted the biomechanical effects of different surgical procedures and instruments on adjacent segments, internal fixation systems, and the overall cervical spine through FE analysis. To compare the biomechanical effects between the zero-profile device and cage-plate device in skip-level multistage anterior cervical discectomy and fusion (ACDF). ACDF is often considered the standard treatment for degenerative cervical spondylosis. However, the selection of surgical methods and instruments in cases of skip-level cervical degenerative disk disease is still controversial. Three FE models were constructed, which used noncontiguous 2-level Zero-P (NCZP) devices for C3/4 and C5/6, a noncontiguous 2-level cage-plate (NCCP) for C3/4 and C5/6, and a contiguous 3-level cage-plate (CCP) for C3/6. Simulate daily activities in ABAQUS. The range of motion (ROM), von Mises stress distribution of the endplate and internal fixation system, and intervertebral disk pressure (IDP) of each model were recorded and compared. Similar to the stress of the cortical bone, the maximum stress of the Zero-P device was higher than that of the CP device for most activities. The ROM increments of the superior, inferior, and intermediate segments of the NCZP model were lower than those of the NCCP and CCP models in many actions. In terms of the IDP, the increment value of stress for the NCZP model was the smallest, whereas those of the NCCP and CCP models were larger. Similarly, the increment value of stress on the endplate also shows the minimum in the NCZP model. Noncontiguous ACDF with zero profile can reduce the stress on adjacent intervertebral disks and endplates, resulting in a reduced risk of adjacent segment disease development. However, the high cortical bone stress caused by the Zero-P device may influence the risk of fractures.

Effects of biomechanics on colorectal organoid culture

In recent years, organoids have become a crucial model for studying the physiopathological processes in tissues and organs. The emergence of organoids has promoted the research on the mechanisms of the occurrence and clinical translation of diseases. Among these organoid models, colorectal organoid models are increasingly mature. Colorectal cancer is a common gastrointestinal malignant tumor worldwide, posing a serious threat to human health. Colorectal organoids provide a new model for studying the pathophysiology, drug sensitivity, and precision medicine of colorectal cancer. The conventional culture systems of colorectal organoids focus more on the role of biochemical factors, neglecting the fact that the gut is also influenced by biophysical signals in vivo. Therefore, in this review, we discuss the theories related to colorectal organoids and biomechanics and expound the effects of biomechanics on colorectal organoid culture.

Extending the intermedullary nail will not reduce the potential risk of femoral head varus in PFNA patients biomechanically: a clinical review and corresponding numerical simulation

Femoral head varus is an important complication in intertrochanteric fracture patients treated with proximal femoral nail anti-rotation (PFNA) fixation. Theoretically, extending the length of the intramedullary nail could optimize fixation stability by lengthening the force arm. However, whether extending the nail length can optimize patient prognosis is unclear. In this study, a review of imaging data from intertrochanteric fracture patients with PFNA fixation was performed, and the length of the intramedullary nail in the femoral trunk and the distance between the lesser trochanter and the distal locking screw were measured. The femoral neck varus status was judged at the 6-month follow-up. The correlation coefficients between nail length and femoral neck varus angle were computed, and linear regression analysis was used to determine whether a change in nail length was an independent risk factor for femoral neck varus. Moreover, the biomechanical effects of different nail lengths on PFNA fixation stability and local stress distribution have also been verified by numerical mechanical simulations. Clinical review revealed that changes in nail length were not significantly correlated with femoral head varus and were also not an independent risk factor for this complication. In addition, only slight biomechanical changes can be observed in the numerical simulation results. Therefore, commonly used intramedullary nails should be able to meet the needs of PFNA-fixed patients, and additional procedures for longer nail insertion may be unnecessary.

In-silico study of the biomechanical effects of proximal-fibular osteotomy on knee joint contact pressure in varus-valgus misalignment

The aim of this work is to investigate in-silico the biomechanical effects of a proximal fibular osteotomy (PFO) on a knee joint with different varus/valgus deformities on the progression of knee osteoarthritis (KOA). A finite element analysis (FEA) of a human lower extremity consisting of the femoral, tibial and fibular bones and the cartilage connecting them was designed. The FEA was performed in a static standing primitive position to determine the contact pressure (CP) distribution and the location of the center of pressure (CoP). The analysis examined the relationship between these factors and the degree of deformation of the hip-knee angle in the baseline condition. The results suggested that PFO could be a simple and effective surgical treatment for patients with associated genu varum. This work also reported that a possible CP homogenization and a CoP correction can be achieved for medial varus deformities after PFO. However, it reduced its effectiveness for tibial origin valgus misalignment and worsened in cases of femoral valgus misalignment.

Biomechanical evaluation of reinsertion and revision screws in the subaxial cervical vertebrae

BackgroundThis study aimed to evaluate the biomechanical effects of reinserted or revised subaxial cervical vertebral screws.MethodsThe first part aimed to gauge the maximum insertional torque (MIT) of 30 subaxial cervical vertebrae outfitted with 4.0-mm titanium screws. A reinsertion group was created wherein a screw was wholly removed and replaced along the same trajectory to test its maximum pullout strength (MPOS). A control group was also implemented. The second part involved implanting 4.0-mm titanium screws into 20 subaxial cervical vertebrae, testing them to failure, and then reinserting 4.5-mm revision screws along the same path to determine and compare the MIT and MPOS between the test and revision groups.ResultsPart I findings: No significant difference was observed in the initial insertion’s maximum insertion torque (MIT) and maximum pull-out strength (MPOS) between the control and reinsertion groups. However, the MIT of the reinsertion group was substantially decreased compared to the first insertion. Moderate to high correlations were observed between the MIT and MPOS in both groups, as well as between the MIT of the first and second screw in the reinsertion group. Part II, the MIT and MPOS of the screw in the test group showed a strong correlation, while a modest correlation was observed for the revision screw used in failed cervical vertebrae screw. Additionally, the MPOS of the screw in the test group was significantly higher than that of the revision screw group.ConclusionThis study suggests that reinsertion of subaxial cervical vertebrae screws along the same trajectory is a viable option that does not significantly affect fixation stability. However, the use of 4.5-mm revision screws is inadequate for failed fixation cases with 4.0-mm cervical vertebral screws.

Comparative Biomechanical Stability of the Fixation of Different Miniplates in Restorative Laminoplasty after Laminectomy: A Finite Element Study

A novel H-shaped miniplate (HSM) was specifically designed for restorative laminoplasties to restore patients’ posterior elements after laminectomies. A validated finite element (FE) model of L2/4 was utilized to create a laminectomy model, as well as three restorative laminoplasty models based on the fixation of different miniplates after a laminectomy (the RL-HSM model, the RL-LSM model, and the RL-THM model). The biomechanical effects of motion and displacement on a laminectomy and restorative laminoplasty with three different shapes for the fixation of miniplates were compared under the same mechanical conditions. This study aimed to validate the biomechanical stability, efficacy, and feasibility of a restorative laminoplasty with the fixation of miniplates post laminectomy. The laminectomy model demonstrated the greatest increase in motion and displacement, especially in axial rotation, followed by extension, flexion, and lateral bending. The restorative laminoplasty was exceptional in preserving the motion and displacement of surgical segments when compared to the intact state. This preservation was particularly evident in lateral bending and flexion/extension, with a slight maintenance efficacy observed in axial rotation. Compared to the laminectomy model, the restorative laminoplasties with the investigated miniplates demonstrated a motion-limiting effect for all directions and resulted in excellent stability levels under axial rotation and flexion/extension. The greatest reduction in motion and displacement was observed in the RL-HSM model, followed by the RL-LSM model and then the RL-THM model. When comparing the fixation of different miniplates in restorative laminoplasties, the HSMs were found to be superior to the LSMs and THMs in maintaining postoperative stability, particularly in axial rotation. The evidence suggests that a restorative laminoplasty with the fixation of miniplates is more effective than a conventional laminectomy due to the biomechanical effects of restoring posterior elements, which helps patients regain motion and limit load displacement responses in the spine after surgery, especially in axial rotation and flexion/extension. Additionally, our evaluation in this research study could benefit from further research and provide a methodological and modeling basis for the design and optimization of restorative laminoplasties.

Biomechanical effects of adding an articulating toe joint to a passive foot prosthesis for incline and decline walking.

Walking on sloped surfaces is challenging for many lower limb prosthesis users, in part due to the limited ankle range of motion provided by typical prosthetic ankle-foot devices. Adding a toe joint could potentially benefit users by providing an additional degree of flexibility to adapt to sloped surfaces, but this remains untested. The objective of this study was to characterize the effect of a prosthesis with an articulating toe joint on the preferences and gait biomechanics of individuals with unilateral below-knee limb loss walking on slopes. Nine active prosthesis users walked on an instrumented treadmill at a +5° incline and -5° decline while wearing an experimental foot prosthesis in two configurations: a Flexible toe joint and a Locked-out toe joint. Three participants preferred the Flexible toe joint over the Locked-out toe joint for incline and decline walking. Eight of nine participants went on to participate in a biomechanical data collection. The Flexible toe joint decreased prosthesis Push-off work by 2 Joules during both incline (p = 0.008; g = -0.63) and decline (p = 0.008; g = -0.65) walking. During incline walking, prosthetic limb knee flexion at toe-off was 3° greater in the Flexible configuration compared to the Locked (p = 0.008; g = 0.42). Overall, these results indicate that adding a toe joint to a passive foot prosthesis has relatively small effects on joint kinematics and kinetics during sloped walking. This study is part of a larger body of work that also assessed the impact of a prosthetic toe joint for level and uneven terrain walking and stair ascent/descent. Collectively, toe joints do not appear to substantially or consistently alter lower limb mechanics for active unilateral below-knee prosthesis users. Our findings also demonstrate that user preference for passive prosthetic technology may be both subject-specific and task-specific. Future work could investigate the inter-individual preferences and potential benefits of a prosthetic toe joint for lower-mobility individuals.

Finite Element Analysis of Six Internal Fixations in the Treatment of Pauwels Type III Femoral Neck Fracture.

The current investigation sought to utilize finite element analysis to replicate the biomechanical effects of different fixation methods, with the objective of establishing a theoretical framework for the optimal choice of modalities in managing Pauwels type III femoral neck fractures. The Pauwels type III fracture configuration, characterized by angles of 70°, was simulated in conjunction with six distinct internal fixation methods, including cannulated compression screw (CCS), dynamic hip screw (DHS), DHS with de-rotational screw (DS), CCS with medial buttress plate (MBP), proximal femoral nail anti-rotation (PFNA), and femoral neck system (FNS). These models were developed and refined using Geomagic and SolidWorks software. Subsequently, finite element analysis was conducted utilizing Ansys software, incorporating axial loading, torsional loading, yield loading and cyclic loading. Under axial loading conditions, the peak stress values for internal fixation and the femur were found to be highest for CCS (454.4; 215.4 MPa) and CCS + MBP (797.2; 284.2 MPa), respectively. The corresponding maximum and minimum displacements for internal fixation were recorded as 6.65 mm for CCS and 6.44 mm for CCS + MBP. When subjected to torsional loading, the peak stress values for internal fixation were highest for CCS + MBP (153.6 MPa) and DHS + DS (72.8 MPa), while for the femur, the maximum and minimum peak stress values were observed for CCS + MBP (119.3 MPa) and FNS (17.6 MPa), respectively. Furthermore, the maximum and minimum displacements for internal fixation were measured as 0.249 mm for CCS + MBP and 0.205 mm for PFNA. Additionally, all six internal fixation models showed excellent performance in terms of yield load and fatigue life. CCS + MBP had the best initial mechanical stability in treatment for Pauwels type III fracture. However, the MBP was found to be more susceptible to shear stress, potentially increasing the risk of plate breakage. Furthermore, the DHS + DS exhibited superior biomechanical stability compared to CCS, DHS, and PFNA, thereby offering a more conducive environment for fracture healing. Additionally, it appeared that FNS represented a promising treatment strategy, warranting further validation in future studies.

Biomechanical and histological changes associated with riboflavin ultraviolet-A-induced CXL with different irradiances in young human corneal stroma

Keratoconus (KC) is a degenerative condition affecting the cornea, characterized by progressive thinning and bulging, which can ultimately result in serious visual impairment. The onset and progression of KC are closely tied to the gradual weakening of the cornea's biomechanical properties. KC progression can be prevented with corneal cross-linking (CXL), but this treatment has shortcomings, and evaluating its tissue stiffening effect is important for determining its efficacy. In this field, the shortage of human corneas has made it necessary for most previous studies to rely on animal corneas, which have different microstructure and may be affected differently from human corneas. In this research, we have used the lenticules obtained through small incision lenticule extraction (SMILE) surgeries as a source of human tissue to assess CXL. And to further improve the results' reliability, we used inflation testing, personalized finite element modeling, numerical optimization and histology microstructure analysis. These methods enabled determining the biomechanical and histological effects of CXL protocols involving different irradiation intensities of 3, 9, 18, and 30 mW/cm2, all delivering the same total energy dose of 5.4 J/cm2. The results showed that the CXL effect did not vary significantly with protocols using 3–18 mW/cm2 irradiance, but there was a significant efficacy drop with 30 mW/cm2 irradiance. This study validated the updated algorithm and provided guidance for corneal lenticule reuse and the effects of different CXL protocols on the biomechanical properties of the human corneal stroma.

Biomechanical Effect of Different Posterior Fixation Techniques on Stability and Adjacent Segment Degeneration in Treating Thoracolumbar Burst Fracture With Osteoporosis: A Finite Element Analysis.

Finite element analysis. To investigate the biomechanical effect of four posterior fixation techniques on stability and adjacent segment degeneration in treating thoracolumbar burst fractures with osteoporosis. In terms of stability and adjacent segment degeneration, there remains no consensus or guidelines on the optimal technique for the treatment of thoracolumbar burst fractures in patients with osteoporosis. Images of CT scans were imported into MIMICS and further processed by Geomagic to build three-dimensional models of the T10-L5 region. A v-shaped osteotomy was performed on the L1 vertebral body to simulate a burst fracture in the setting of osteoporosis. Subsequently, four fixation techniques were designed using SolidWorks software. Range of motion (ROM) of the global spine, ROM distribution, ROM of adjacent segment, Von Mises stress on adjacent intervertebral disks, and facet joints were analyzed. Among the four groups, the cortical bone screw fixation (CBT) showed the highest global ROM at 1.86°, while long-segmented pedicle screw fixation (LSPS) had the lowest global ROM at 1.25°. The LSPS had the smallest percentage of ROM of fractured vertebral body to fixed segment at 75.04%, suggesting the highest stability after fixation. The maximum ROM of the adjacent segment was observed in the CBT at 1.32°, while the LSPS exhibited the smallest at 0.89°. However, the LSPS group experienced larger maximum stress on the adjacent intervertebral disks (9.60MPa) and facet joints (3.36MPa), indicating an increasing risk of adjacent segment disease. LSPS provided the greatest stability, while CBT provided the smallest amount of stability. However, the elevated stress on adjacent intervertebral disks and facet joints after LSPS fixation increased the possibility of adjacent segment degeneration. Cement-augmented pedicle screw fixation (CAPS) and combined cortical bone screw and pedicle screw fixation (CBT-PS) demonstrated significant biomechanical advantages in providing moderate fixation strength while reducing stress on the intervertebral disks and facet joints.

Biomechanical effects of muscle loading on early healing of femoral stem fractures: a combined musculoskeletal dynamics and finite element approach

Femoral stem fractures (FST) are often accompanied by muscle injuries, however, what muscle injuries affect fracture healing and to what extent is unknown. The purpose of this study was to analyze the extent to which different muscles affect FST healing through a combined musculoskeletal dynamics and finite element approach. Modeling the lower extremity musculoskeletal system for 12 different muscle comprehensives. Muscle and joint reaction forces on the femur were calculated and these data were used as boundary conditions input to the FSTs model to predict the degree of muscle influence on fracture healing. Finally, we will investigate the extent to which muscle influences FST healing during knee flexion. Muscle and joint forces are highly dependent on joint motion and have a significant biomechanical influence on interfragmentary strain (IFS) healing. The psoas major (PM), gastrocnemius lateralis (GL) and gastrocnemius medialis (GM) muscles play a major role in standing, with GM > PM > GL, whereas the gluteus medius posterior (GMP), vastus intermedius (VI), vastus medialis (VM), vastus lateralis superior (VLS), and adductor magnus distalis (AMD) muscles play a major role in knee flexion, with VLS > VM > VI > AMD > GMP. Mechanical stimulus-controlled healing can be facilitated when the knee joint is flexed less than 20°. Different muscles exert varying degrees of influence on the healing of fractures. Therefore, comprehending the impact of particular muscles on fracture site tissue FST healing can aid orthopedic surgeons in formulating improved surgical and rehabilitation strategies.

Biomechanical effects of men’s dress shoes made with bacterial cellulosic composite

PurposeThis study aimed to compare the performance of sustainable shoes made with bacterial cellulosic composite and commercial leather shoes using an experimental research design. The two specific research objectives were: (1) to examine the basic material properties of multi-layered bacterial cellulosic materials (MBC), which include green tea-based cellulosic (GBC) mats, hemp fabrics, and denim fabrics, in comparison with those of two-layered leathers (MCP) consisting of calf-skin and pig-skin – commonly used in shoe manufacturing; and (2) to explore wearers’ performance in the two types of shoes by assessing quantitative kinematic and kinetic parameters of lower body movements.Design/methodology/approachThis study focused on assessing the basic materials testing and performance of sustainable shoes through a biomechanical approach, in contrast to commercially available leather shoes, through human wear trials. In this study, green tea-based cellulosic (GBC) mats were developed using the optimal combination of ingredients for cellulose growth. Subsequently, the GBC, denim fabric (100% cotton), and 100% hemp fabric were combined to create multi-layered bacterial cellulosic materials (MBC) as an alternative to leather. Additionally, calf-skin and pig-skin leathers were utilized to produce a commercially available two-layered leather (MCP), commonly employed in shoe manufacturing. 37 of the 42 human subjects who participated in wear testing were collected. A paired t-test was conducted to determine whether significant mean differences existed between the two shoe types, a paired t-test was conducted.FindingsTo develop a biodegradable and compostable material that could be used as a leather alternative for the footwear industry, we proposed MBC and examined its properties compared with those of MCP, a product often used when making shoes. These findings confirmed the similar properties of MBC and MCP from the material testing and the possibility of using a men’s sustainable shoe prototype as a leather alternative, in terms of kinematics and kinetics.Practical implicationsThe new multi-layered bacterial cellulosic materials (MBC) could be an alternative to commercial leathers such as innovative sustainable material construction, advanced design, and advanced techniques to optimize the overall performance of sustainable footwear.Originality/valueInvestigating the integration of smart textile technologies, ergonomic design principles, and personalized customization will contribute to developing MBC and making sustainable shoes using MBC compared with commercial leather shoes. This study provides valuable insights into further refinement and innovation in the sustainable footwear industry.

Myocardial biomechanical effects of fetal aortic valvuloplasty

Fetal critical aortic stenosis with evolving hypoplastic left heart syndrome (CAS-eHLHS) can progress to a univentricular (UV) birth malformation. Catheter-based fetal aortic valvuloplasty (FAV) can resolve stenosis and reduce the likelihood of malformation progression. However, we have limited understanding of the biomechanical impact of FAV and subsequent LV responses. Therefore, we performed image-based finite element (FE) modeling of 4 CAS-eHLHS fetal hearts, by performing iterative simulations to match image-based characteristics and then back-computing physiological parameters. We used pre-FAV simulations to conduct virtual FAV (vFAV) and compared pre-FAV and post-FAV simulations. vFAV simulations generally enabled partial restoration of several physiological features toward healthy levels, including increased stroke volume and myocardial strains, reduced aortic valve (AV) and mitral valve regurgitation (MVr) velocities, reduced LV and LA pressures, and reduced peak myofiber stress. FAV often leads to aortic valve regurgitation (AVr). Our simulations showed that AVr could compromise LV and LA depressurization but it could also significantly increase stroke volume and myocardial deformational stimuli. Post-FAV scans and simulations showed FAV enabled only partial reduction of the AV dissipative coefficient. Furthermore, LV contractility and peripheral vascular resistance could change in response to FAV, preventing decreases in AV velocity and LV pressure, compared with what would be anticipated from stenosis relief. This suggested that case-specific post-FAV modeling is required to fully capture cardiac functionality. Overall, image-based FE modeling could provide mechanistic details of the effects of FAV, but computational prediction of acute outcomes was difficult due to a patient-dependent physiological response to FAV.

The biomechanical effect of lumbopelvic distance reduction on reconstruction after total sacrectomy: a comparative finite element analysis of four techniques

BACKGROUND CONTEXTFollowing total sacrectomy, lumbopelvic reconstruction is essential to restore continuity between the lumbar spine and pelvis. However, to achieve long-term clinical stability, bony fusion between the lumbar spine and the pelvic ring is crucial. Reduction of the lumbopelvic distance can promote successful bony fusion. Although many lumbopelvic reconstruction techniques (LPRTs) have been previously analyzed, the biomechanical effect of lumbopelvic distance reduction (LPDR) has not been investigated yet. PURPOSETo evaluate and compare the biomechanical characteristics of four different LPRTs while considering the effect of LPDR. STUDY DESIGN/SETTINGA comparative finite element (FE) study. METHODSThe FE models following total sacrectomy were developed to analyze four different LPRTs, with and without LPDR. The closed-loop reconstruction (CLR), the sacral-rod reconstruction (SRR), the four-rod reconstruction (FRR), and the improved compound reconstruction (ICR) techniques were analyzed in flexion, extension, lateral bending, and axial rotation. Lumbopelvic stability was assessed through the shift-down displacement and the relative sagittal rotation of L5, while implant safety was evaluated based on the stress state at the bone-implant interface and within the rods. RESULTSRegardless of LPDR, both the shift-down displacement and relative sagittal rotation of L5 consistently ranked the LPRTs as ICR<SRR<FRR<CLR, with ICR being the stiffest for both parameters. LPDR decreased the shift-down displacement values by 25% in CLR, by 61% in SRR, by 15% in FRR, and by 46% in ICR, as well as reduced the relative sagittal rotation values by 21% in CLR, by 73% in SRR, by 11% in FRR, and by 53% in ICR. Considering the stress at the bone-implant interface, without LPDR, the ICR yielded the smallest stress values for flexion, lateral bending, and axial rotation with 131.4 MPa, 68.2 MPa, and 70.3 MPa, respectively, and the second smallest in extension with 36.1 MPa. Due to LPDR, these stress values were reduced by 31% in flexion, by 17% in extension, by 29% in lateral bending, and by 29% in axial rotation. Within the rods, without LPDR, the ICR yielded the smallest stress values for flexion, extension, lateral bending, and axial rotation with 346.5 MPa, 108.0 MPa, 186.2 MPa, and 199.7 MPa, respectively. With LPDR, these stress values were reduced by 16% in flexion, by 9% in extension, by 11% in lateral bending, and by 12% in axial rotation. CONCLUSIONSLPDR significantly improved both lumbopelvic stability and implant safety in all reconstruction techniques after total sacrectomy. LPDR reduced the shift-down displacement of L5, the relative sagittal rotation of L5, and the stress values at the bone-implant interface. Furthermore, in the ICR and SRR techniques, LPDR decreased the peak stress values within the rods. All four investigated LPRTs demonstrated suitability for lumbopelvic reconstruction, with the ICR technique exhibiting the highest lumbopelvic stiffness. CLINICAL SIGNIFICANCELPDR creates a biomechanically advantageous environment following total sacrectomy; therefore, it has the potential to impact the design of custom-made 3D-printed or traditional LPRTs. However, to confirm the findings of the current FE study, long-term clinical trials are recommended.

The effect of papaverine on tendon healing and adhesion in rats following Achilles tendon repair.

The study aimed to examine the histopathological and biomechanical effects of papaverine administered intraperitoneally and locally on Achilles tendon healing in a rat model. Forty-eight adult male Sprague-Dawley rats (range, 300 to 400 g) were used in this study conducted between October and November 2022. The rats were divided into three groups, with each group further subdivided into two for sacrifice on either the 15th (early period) or 30th (late period) day after surgery. The first (control) group received no treatment following Achilles tendon repair, while papaverine was intraperitoneally administered every other day for 10 days in the second group and locally in the third group after surgery. On the 15th and 30th days, the rats were sacrificed, and their Achilles tendons were subjected to biomechanical testing and histopathological evaluation. Histopathologically, there were no significant differences among the groups on the 15th day. However, on the 30th day, the locally applied papaverine group exhibited superior histopathological outcomes compared to the control group (p<0.05). Concerning the highest tensile strength values before rupture, the biomechanical assessment showed that the group receiving local papaverine treatment in the early period and both the group with systemic papaverine treatment and the one with local papaverine treatment in the late period displayed a statistically significant advantage compared to the control group (p<0.05). Locally administered papaverine has positive biomechanical effects in the early period and exhibits a positive correlation both histopathologically and biomechanically in the late period. Novel therapeutic options may be provided for patients through these findings.

Effect of Plate Configuration in the Primary Stability of Osteotomies and Biological Reconstructions of Femoral Defects: Finite-Element Study.

Osteosynthesis is an alternative treatment for stabilizing femur-bone traumas. The initial stability of the fixation systems is one of the biomechanical parameters affecting implant failure and bone union, especially in surgeries of intercalary reconstructions after the removal of bone tumors. This study aimed to investigate the initial biomechanical effect of using one or two osteosynthesis plate configurations for femoral fixation and the effect of fastening the allograft to the osteosynthesis plate in the case of femoral allograft reconstructions. Three finite-element models of a femur with three different fixation conditions for a transverse osteotomy in the middle of the diaphysis, i.e., using one and two osteosynthesis plates and an intercalary allograft, were constructed. An eight-hole compression plate and a six-hole second plate were used to simulate osteosynthesis plates. The plate screws were tightened previously to the loading, and the tightening sequences simulate the bolt-tightening procedure in a surgical environment. The models were imported into the ADINA System for nonlinear analysis, using compression loads applied over the femur head. Models with the dual fixation systems had the most outstanding compression stiffness. The femur head movement in the dual plate system was 24.8% smaller than in the single plate system. A statistical analysis of a region of interest (VOI) placed in the femur diaphysis showed that the biomechanical effect of using the dual plate system is smaller in the osteotomy region than at the femur head, e.g., a displacement average decrease of only 5% between the two systems, while the maximum value decreases by 26.8%. The allograft fixation to the second osteosynthesis plate leads to an improvement in the system stability. The results presented in this work show that including the bolt analysis in the femoral diaphysis osteotomy fixation will allow for capturing the nonlinear behavior of the osteotomy region more realistically. The stability of the intercalary reconstruction of the femoral diaphysis was higher when the allograft was fastened to the second osteosynthesis plate.

Short-term lumbar disc and lumbar stability changes of one-hole split endoscope technique treatment of spinal stenosis

ObjectiveInvestigating the early biomechanical effects of the one-hole split endoscope (OSE) technique on lumbar spine after decompression surgery.MethodsA retrospective analysis was conducted on 66 patients with lumbar spinal stenosis (LSS) who underwent OSE technique surgery at the affiliated hospital of Binzhou Medical University from September 2021 to September 2022. The patients had complete postoperative follow-up records. The mean age was (51.73 ± 12.42) years, including 33 males and 33 females. The preoperative and postoperative imaging data were analyzed, including disc height (DH), foraminal height (FH), lumbar lordosis angle (LLA), changes in disc angle, anterior-posterior translation distance, and lumbar intervertebral disc Pfirrmann grading. The visual analogue scale (VAS) was applied to evaluate the severity of preoperative, postoperative day 1, postoperative 3 months, and final follow-up for back and leg pain. The Oswestry Disability Index (ODI) was applied to assess the functionality at all the listed time points. The modified MacNab criteria were applied to evaluate the clinical efficacy at the final follow-up.ResultsIn 66 patients, there were statistically significant differences (p < 0.05) in DH and FH at the affected segments compared to preoperative values, whereas no significant differences (p > 0.05) were found in DH and FH at the adjacent upper segments compared to preoperative values. There was no statistically significant difference in the LLA compared to preoperative values (p > 0.05). Both the affected segments and adjacent upper segments showed statistically significant differences in Pfirrmann grading compared to preoperative values (p < 0.05). There were no statistically significant differences in the changes in disc angle or anterior-posterior translation distance in the affected or adjacent segments compared to preoperative values (p > 0.05). The VAS scores for back and leg pain, as well as the ODI, significantly improved at all postoperative time points compared to preoperative values. Among the comparisons at different time points, the differences were statistically significant (p < 0.05). The clinical efficacy was evaluated at the final follow-up using the modified MacNab criteria, with 51 cases rated as excellent, 8 cases as good, and 7 cases as fair, resulting in an excellent-good rate of 89.39%.ConclusionsThe OSE technique, as a surgical option for decompression in the treatment of LSS, has no significant impact on lumbar spine stability in the early postoperative period. However, it does have some effects on the lumbar intervertebral discs, which may lead to a certain degree of degeneration.

Experimental investigation of tension-reducing effectiveness of keystone perforator island flap.

Nowadays, the reconstruction of large and complex defects with keystone perforator island flaps (KPIF) has gained popularity in plastic and reconstructive surgery. The keystone perforator island flap was described as a curvilinear shaped trapezoidal design flap, with two V-Y advancement flaps end-to-side. It is a multiperforator advancement flap, based on multiple fasciocutaneous or musculocutaneous perforators, described by Behan in 2003. These flaps have a simple harvest technique, an easy-to-implement design, and they are time and cost-saving. Their blood supply lends a versatile and robust character, with less complications. Nonetheless, their biomechanical properties and effectiveness are unclear, the wound-closure tension-reducing effect is not well documented in existing literature. The present study aims to investigate the wound closure tension-reducing effect of type I, type IIA, type Sidney Melanoma Unit I (SMU) and type SMU II KPIFs. The main purpose of this study was to clarify the tension-reducing effect of the KPIF technique, which can contribute to the understanding of the biomechanical benefits of the KPIF. This is an experimental, in vivo study, based on twelve white race porcine models (PIC-FII-377), as their anatomy and wound healing process is very similar to that of humans. In this study, 42 wounds that could not be closed by primary wound closure, known as 'unclosable' elliptical defects, were created in six different anatomical regions. The criteria used for not achieving primary wound closure were the breaking of 0 nylon suture or the edges of the wound. Each defect was closed with different types of keystone perforator island flap: type I, type IIA, type Sydney Melanoma Unit I and type Sydney Melanoma Unit II. Keystone perforator island flaps were used in 42 cases. Intraoperative tissue tension was measured by an AXIS FB50, 50 N force gauge tensiometer. In all cases a wide elliptical excision was performed for the primary defect. Before reconstruction, tissue tension was measured across the widest point of the elliptical primary defect. Skin incision was performed for the first flap, without division of deep fascia. After preparing first flap, tension was measured at the widest point of the wound. Furthermore, deep fascia for the second flap was divided, tissue tension across the widest point of the primary defect was measured. Finally, tension was measurement across the widest point of the donor-site after closure of the defect-side flap and V-Y closure of either end of keystone perforator island flap. In this study were included 12 porcine model (PIC-FII-377). A number of 42 keystone perforator island flaps were performed in this study, in six different anatomical regions, ranging between 3.3 x 12 cm and 16 x 30 cm. All elliptical defects were unclosable, with varying sizes ranging between 2 x 4 cm and 8 x 20 cm. The mean tension that was required to close all wounds with primary closure initially was 24.51 N 10.73 N. After using a type I KPIF a tension decrease of -7.04 N ± 4.93 N was seen, in the case of type IIA KPIF the tension decreased to -12.43 N± 5.63 N. Furthermore, after reconstruction with type SMU I KPIF the tension decreased to -7.38N ± 5.21N. After using a type SMU II KPIF a tension decrease of -10.52 N± 5.74 N was seen. The main purpose of this study was to clarify the tension-reducing effect of the KPIF technique, which can contribute to the understanding of the biomechanical benefits of the KPIF. The outcomes of the present study suggest that type I, type IIA, type SMU I, and SMU II of keystone perforator island flaps have a significant tension-reducing effects, especially the technique that involves the division of the deep fascia. The results of this experimental research thoroughly explain the benefits of these flaps. The effectiveness of the flap and doubts on biomechanical properties have not been answered so far. It will encourage more plastic surgeons to use the flap, especially given its proven benefits.