Bioanalytical Method Research Articles

Pharmacokinetic Properties of Baitouweng Decoction in Bama Miniature Pigs: Implications for Clinical Application in Humans.

Traditional Chinese medicine (TCM) serves as a significant adjunct to chemical treatment for chronic diseases. For instance, the administration of Baitouweng decoction (BTWD) has proven effective in the treatment of ulcerative colitis. However, the limited understanding of its pharmacokinetics (PK) has impeded its widespread use. Chinese Bama miniature pigs possess anatomical and physiological similarities to the human body, making them a valuable model for investigating PK properties. Consequently, the identification of PK properties in Bama miniature pigs can provide valuable insights for guiding the clinical application of BTWD in humans. To facilitate this research, a rapid and sensitive UPLC-MS/MS method has been developed for the simultaneous quantification of eleven active ingredients of BTWD in plasma. Chromatographic separation was conducted using an Acquity UPLC HSS T3 C18 column and a gradient mobile phase comprising acetonitrile and water (containing 0.1% acetic acid). The methodology was validated in accordance with the FDA Bioanalytical Method Validation Guidance for Industry. The lower limit of quantitation fell within the range of 0.60-2.01 ng/mL. Pharmacokinetic studies indicated that coptisine chloride, berberine, columbamine, phellodendrine, and obacunone exhibited low Cmax, while fraxetin, esculin, fraxin, and pulchinenoside B4 were rapidly absorbed and eliminated from the plasma. These findings have implications for the development of effective components in BTWD and the adjustment of clinical dosage regimens.

Development of a quantification method for arginase inhibitors by LC-MS/MS with benzoyl chloride derivatization

Arginase is an enzyme responsible for converting arginine, a semi-essential amino acid, to ornithine and urea. Arginine depletion suppresses immunity via multiple mechanisms including inhibition of T-cell and NK cell proliferation and activity. Arginase inhibition is therefore an attractive mechanism to potentially reverse immune suppression and thus has been explored as a therapy for oncology and respiratory indications. Small molecules targeting arginase present significant bioanalytical challenges for in vitro and in vivo characterization as inhibitors of arginase are typically hydrophilic in nature. The resulting low or negative LogD characteristics are incompatible with common analytical methods such as RP-ESI-MS/MS. Accordingly, a sensitive, high-throughput bioanalytical method was developed by incorporating benzoyl chloride derivatization to increase the hydrophobic characteristics of these polar analytes. Samples were separated by reversed phase chromatography on a Waters XBridge BEH C18 3.5 μm, 30 × 3 mm column using gradient elution. The mass spec was operated in positive mode using electrospray ionization. The m/z 434.1→176.1, 439.4→181.2, 334.9→150.0 and 339.9→150.0 for AZD0011, AZD0011 IS, AZD0011-PL and AZD0011-PL IS respectively were used for quantitation. The linear calibration range of the assay was 1.00–10,000 ng/mL with QC values of 5, 50 and 500 ng/mL. The qualified method presented herein exhibits a novel, robust analytical performance and was successfully applied to evaluate the in vivo ADME properties of boronic acid-based arginase inhibitor prodrug AZD0011 and its active payload AZD0011-PL.

Development of a method for quantitative determination of nitric oxide (NO) in rat tissues based on high-performance liquid chromatography and mass spectrometry

A quantitative assessment of nitric oxide (NO) production in body tissues is an urgent problem in pharmacology and biochemistry. The study of physiological processes occurring with the participation of NO, as well as the metabolism and pharmacodynamics of pharmacological agents from the group of NO donors, requires the introduction of accurate and reproducible methods for the quantitative determination of this metabolite in biological media.The aim of the study was to develop the HPLC-MS/MS methods for the quantitative determination of NO in various tissues of rats.Materials and methods. The indirect NO quantification was based on estimation of the level of more stable metabolites: nitrites and nitrates extracted from rat tissues by homogenization with water. The reduction of nitrates to nitrites was carried out using nitrate reductase. The derivatization of nitrites was based on a reaction with Griess reagent. The resulting azo dye was determined by HPLC-MS/MS using an Agilent InfinityLab Poroshell 120 EC-C18 4.6×100 mm, 2.7 μm analytical column. The total chromatographic analysis time was 12 minutes, and the analyte retention time was 6.1 minutes. The analytical range of the method was 0.1–100.0 nmol (in terms of nitrite) per 1 ml of plasma or tissue homogenate.Results. The developed a bioanalytical method was validated according to the following parameters: a selectivity, a matrix effect, a recovery degree, a sample transfer, an analytical range linearity, a lower limit of quantification (LLOQ), an intra- and inter-assay accuracy and precision, and a stability at all the stages of the analysis. To test the method, the NO content in the plasma, brain, heart, aorta and lungs of rats was determined.Conclusion. The developed bioanalytical HPLC-MS/MS methods fully meets the validation requirements. The metrological characteristics of the technique make it possible to highly accurately estimate the NO production in various tissues of rats, which is undoubtedly relevant and in demand in the study of pathological processes as well as the mechanism of action of pharmacological agents from the group of NO donors.

THE APPLICATION OF BIOANALYTICAL METHOD OF TAMOXIFEN AND ITS ACTIVE METABOLITES FOR THERAPEUTIC DRUG MONITORING IN BREAST CANCER PATIENTS: A REVIEW

Breast cancer is the most common cancer around the world and in Indonesia. The most widely used agent for breast cancer treatment is tamoxifen, with a fixed dose of 20 mg per day. Tamoxifen is metabolized by cytochrome P450 3A4 (CYP3A4) and 2D6 (CYP2D6) to endoxifen and 4-hydroxytamoxifen, which have 30-to 100-fold more potent antiestrogenic activity than tamoxifen. High variations of CYP3A4 and CYP2D6 genes can lead to interpatient variability in its metabolites concentration. The dose can be increased to 40 or 60 mg per day based on individual needs. Therapeutic drug monitoring (TDM) is required to measure the concentration of tamoxifen and its metabolites to decide the individualized dose. The measurement of drug levels should use a sensitive, selective, accurate, precise, and reliable bioanalytical method. Various bioanalytical methods have been developed in several matrices: urine, scalp hair, serum, plasma, dried blood spot (DBS), and volumetric absorptive microsampling (VAMS) samples, with different sample preparations, and frequently using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The bioanalytical method of tamoxifen and its metabolites in the DBS sample was more suitable in the TDM application due to the low invasive sampling technique, more stable sample, and rapid sample preparation. Therefore, it is more time-and cost-efficient than the other methods.

Validation of a simple bioanalytical method for the determination of melatonin concentration in human serum using high-performance liquid chromatography with a fluorescent detector

Analysis of melatonin in biological samples is a challenge for the analyst both because of its low concentration and because of the numerous interfering substances. Therefore, chromatography, as a powerful analytical technique used for the separation, detection, and quantification of analytes, can be the method of choice for determining melatonin in biological samples for clinical use and pharmacokinetic research. The method was developed and validated according to the internal documents in accordance with Good Laboratory Practice. The concentrations of melatonin in human serum were determined using a high-performance liquid chromatography method with a fluorescence detector and mirtazapine as an internal standard. Preparation of serum samples was performed by liquid–liquid extraction with ethyl acetate: n-hexane (1:1 v/v). High linearity was exhibited over a concentration range of 25–10,000 pg/mL of melatonin, with a correlation coefficient higher than 0.999 during the course of method validation. Repeatability and intermediate precision show a relative standard deviation lower than 6.6 %, and accuracies were from 90.7 % to 110.3 %. The lower limit of quantitation was 30 pg/mL, and the limit of detection was 7.92 pg/mL. The in-house method is simple, fast, reproducible, and applicable for the determination of melatonin in human serum.

A practical approach to supported liquid extraction and measurement of 18 steroids in plasma and serum by targeted liquid chromatography tandem mass spectrometry

Chromatography combined with mass spectrometry is a gold standard technique for steroid measurement, however the type of sample preparation, the dynamic range and reliability of the calibration curve, the chromatographic separation and mass spectrometry settings ultimately determine the success of the method. The steroid biosynthetic pathway is conserved in higher mammals and literature demonstrates that the concentration ranges of different steroid groups are relatively comparable across species. We sought to develop a robust and reliable multi steroid targeted analysis method for blood that would have wide application across higher mammals. The method was developed following bioanalytical method validation guidelines to standards typically applied to human clinical studies, including isotopically labelled internal standards where at all possible. Here we describe the practical approach to a 96-well supported liquid extraction (SLE) method of extraction from plasma (200 µL) using an Extrahera liquid handling robot (Biotage, Sweden), including quality control samples, followed by a comprehensive separation and targeted LC-MS/MS analysis of 18 steroids in plasma (pregnenolone, progesterone, 17α-hydroxyprogesterone, 11-deoxycorticosterone, corticosterone, 11-dehydrocorticosterone, aldosterone, 11-deoxycortisol, 21-deoxycortisol, cortisol, cortisone, androstenedione, testosterone, 5α-dihydrotestosterone, dehydroepiandrosterone, estrone, 17β-estradiol and estriol).•SLE in a 96-well format of up to 74 biological plasma samples, enriched with multiple isotopically labelled internal standards, a 12-point aqueous calibration curve, and 6 serum quality controls, designed to monitor long-term performance of the method•Chromatographic separation of multiple steroids along the gradient, with ammonium fluoride mobile phase additive to improve sensitivity, followed by electrospray ionisation and constant polarity switching•Aqueous calibration standards that cover physiologically relevant ranges - high nanomolar glucocorticoids, low nanomolar androgens and picomolar ranges for estrogens and steroid intermediates.

Analytical and Bioanalytical Methods for the Determination of Dipeptidyl Peptidase-4 Inhibitors in Various Matrices: A Comprehensive Review.

DPP-4 inhibitors, or gliptins, are new oral antidiabetic drugs for type 2 diabetes. They help to regulate insulin and glucagon. These drugs have the advantage of a lower risk of hypoglycemia compared to some other diabetes medications and are typically prescribed when metformin and sulphonylureas have become less effective. This review analyses a range of analytical and bioanalytical methods for DPP-4 inhibitors, that use spectroscopic techniques, chromatographic, and hyphenated techniques for analysis. So far, no review comprising all DPP-4 inhibitors has been presented. The primary objective of this review is to present the analysts with various analytical and bioanalytical methods for the quantification and estimation of DPP-4 inhibitors in different matrices. To improve understanding, a review was carried out by creating a database of pre-existing research from digital sources such as ScienceDirect, and PubMed. The methodology is shown in the flowchart of the literature selection process. The comprehensive assessment of methods for analysing DPP-4 inhibitors can be a valuable resource for researchers and healthcare practitioners. Hitherto, no review encompassing all DPP-4 inhibitors has been presented. Therefore, gaps in the data available on a particular subject, need to be required to collect data on a particular construct. The review suggests that chromatographic techniques were majorly used for analysis wherein solvents like acetonitrile, methanol, and buffer solutions were used as mobile phases that can deteriorate HPLC columns and equipment. So, scientists could investigate new methods for the assessment of DPP-4 inhibitors using more eco-friendly solvents.

Impact of introducing a new biological matrix into a validated bioanalytical method: Focus on matrix protein content.

International guidance on bioanalytical method validation recommends the practice of partial validation when introducing a new matrix from the same species into a previously fully validated assay. Planning the partial validation protocol should include an evaluation of analyte chemistry, consideration of sample container materials, and a comparison of properties between the relevant biological matrices. Transition of a serum/plasma-validated bioanalytical method to analysis from a low-protein matrix, such as urine, cerebral spinal fluid, or oral fluid can result in inconsistent analyte recovery. The low recovery can potentially be mistaken for signal suppression or lack of drug stability and may be more pronounced in low-concentration or low-volume samples. In addition, adsorption and absorption interactions with containers may be exacerbated in low-protein matrices. Several possibilities exist for mitigating the impact of non-specific binding and low-protein matrices, including surfactants, bovine serum albumin, and β-cyclodextrin. Finally, higher matrix protein can facilitate analyte stability. Given all this, matrix protein content should not be overlooked when anticipating a partial bioanalytical method validation.

A bioanalytical assay for estimation of thymoquinone in rats cerebrospinal fluid and brain tissues of nasally administrated thymoquinone loaded lipo-polymeric nanoshells and its pharmacokinetic profiling

Thymoquinone (TH) has been one of the major phytochemical used in the treatment of cancers since long time, especially in the management of glioblastoma multiforme (GBM). The formulation of lipo-polymeric nanoshells (LPNs) and their nasal delivery are fascinating approaches for overcoming the drawbacks of low solubility and poor bioavailability of TH. Hence targeting LPNs to the brain requires a validated bioanalytical method for the assessment of TH concentration in Cerebrospinal fluid (CSF) and brain tissue homogenates (BTH). Therefore, the current work focuses on the development and validation of high-performance liquid chromatography (HPLC) method in CSF by employing nasal simulated fluid (NSF) as one of the major components of the mobile phase. The developed method was checked for linearity in the range of 0.05 to 1.6 μg/mL, having an r2 value of 0.999 with mean % recovery >95% and % RSD values below <2.0%. The developed method gave a clear separation of TH at 6.021 ± 0.17 min with an internal standard at 4.102 ± 0.09 min and a CSF spike at 2.170 ± 0.12 min. The developed method assisted in determining the in-vitro and in-vivo drug release study of LPNs, pharmacokinetic profiling, qualitative in-vivo brain uptake study, in-vitro cellular uptake, and generating stability data of formulated LPNs proposed for intranasal administration in rats.

HPLC-MS/MS Method for the Quantitative Determination of Metformin in Rat Plasma and Its Application to Comparative Bioavailability Assessment

Background: Metformin is a biguanide derivative utilized as a first-line treatment for type 2 diabetes for people over 60 years. However, it faces certain limitations due to its incomplete absorption, resulting in a 50-60% bioavailability. In addition to its blood glucose-lowering effect, the antiproliferative effect of metformin has been demonstrated in vitro. Therefore, it is necessary to consider alternative administration routes that can enhance the bioavailability of metformin, expanding its clinical use beyond its role as an antidiabetic agent. Objective: The aim of the study was to develop a reliable bioanalytical method for the quantitation of metformin in male Sprague-Dawley rat plasma and explore the promising alternative administration route for metformin use. Methods: A robust, high-performance liquid chromatography-tandem mass spectrometry method for the quantification of metformin in rat plasma was developed and validated according to the latest regulatory guidance for bioanalysis. Results: Based on the area under the curves obtained from the rat pharmacokinetic study, subcutaneous injection increased the systemic exposure of metformin by 1.79-fold compared to oral administration in rats. Conclusion: Subcutaneous administration of metformin enhances its bioavailability compared to oral administration, leading to increased antidiabetic effects and potential antitumor activity.

Bioanalytical Method Development and Validation of UV Spectrophotometric Method for Estimation of Metformin Hydrochloride in Urine Sample

Purpose: To develop a simple, sensitive, accurate, precise and rapid UV spectrophotometric method for the determination of metformin in human urine. Methods: Extraction of metformin from urine samples was done by Dilute and shoot method in which urine was diluted up to 1:10 ratio to avoid interference of matrix. For estimation of Metformin hydrochloride, the solvent system employed was water. The metformin hydrochloride was scanned in range of 200nm to 400 nm and wavelength of detection (λdet) was found to be 234 nm. Result: The calibration curve was linear in the range of 1-17 μg/ml. the recovery and assay studies of metformin hydrochloride were within 93-94.85% indicating that the proposed method can be estimation of metformin hydrochloride

Unveiling Pharmacokinetics and Drug Interaction of Linagliptin and Pioglitazone HCl in Rat Plasma Using LC-MS/MS.

The linagliptin (LIN) and pioglitazone HCl (PIO) combination, currently undergoing phase III clinical trials for diabetes mellitus treatment, demonstrated significant improvements in glycemic control. However, the absence of an analytical method for simultaneous determination in biological fluids highlights a crucial gap. This underscores the pressing need for sensitive bioanalytical methods, emphasizing the paramount importance of developing such tools to advance diabetes management strategies and enhance patient care. Herein, a sensitive reverse-phase high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry method was developed for simultaneous determination of LIN and PIO in rat plasma using alogliptin as an internal standard. Chromatographic separation was performed on an Agilent Eclipse Plus C18 (4.6 × 100 mm, 3.5 μm) using an isocratic mobile phase system consisting of ammonium formate (pH 4.5) and methanol using an acetonitrile-induced protein precipitation technique for sample preparation. Multiple reaction monitoring in positive ion mode was used for quantitation of the precursor to production at m/z 473.2 → 419.9 for LIN, 357.1 → 134.2 for PIO, and 340.3 → 116.1 for ALO. The linearity range was 0.5 to 100 and 1 to 2000 ng/mL for LIN and PIO, respectively. The developed method was validated as per US-FDA guidelines and successfully applied to clinical pharmacokinetic and drug-drug interaction studies with a single oral administration of LIN and PIO in rat plasma. Pharmacokinetic parameters of LIN were significantly influenced by the concomitant administration of PIO and vice versa. Molecular modeling revealed the significant interaction of LIN and PIO with P-glycoprotein. Therefore, the drug-drug interaction between LIN and PIO deserves further study to improve drug therapy and prevent dangerous adverse effects.

Investigation of liquid chromatography-mass spectrometry analysis of a peptide aldehyde SJA6017 with identifying its hemiacetal, gem-diol, and enol ether.

The quantitative analysis of SJA6017, a peptide aldehyde inhibitor of calpain (Calpain Inhibitor VI), has encountered challenges in preclinical drug studies. The complex reverse-phase HPLC chromatographic behavior exhibits two peaks, each containing multiple species. An liquid chromatography-mass spectrometry (LC-MS/MS) study proposed an explanation for this phenomenon, caused by the amide aldehyde structure of SJA6017. Four chemical species corresponding to the two HPLC peaks have been identified as SJA6017 and its methyl hemiacetal, methyl enol ether, and gem-diol. In many instances of preclinical studies, methanol is favored as a substitute for DMSO. The hemiacetal is formed when the amide-activated peptide aldehyde reacts with methanol, which can then be further dehydrated in the mass spectrometer ion source under high temperature to form the methyl enol ether. The hemiacetal and gem-diol can also be decomposed to SJA6017 in the ion source. Additionally, the amide-activated peptide aldehyde can easily hydrate to the gem-diol of SJA6017 during sample incubation or sample preparation. The hemiacetal and gem-diol of SJA6017 are stable enough to have different retention times in the liquid chromatography, which explains why SJA6017 appears as two peaks, each containing multiple species. An LC-MS/MS tandem quadrupole mass spectrometer quantitative analysis method is proposed, enabling the analysis of these types of samples. This work serves as both an illustrative example and a cautionary note for mass analysis, sample incubations, and sample preparations involving compounds of peptide aldehyde, including similar aldehyde-containing metabolites, especially when methanol is present. This study provides the information needed to understand peptide aldehyde behavior at various steps of preclinical in vitro studies in the presence of methanol. It has assisted in the development of the SJA6017 bioanalysis method and will also aid in the development of bioanalysis methods for similar peptide aldehydes.

Developing a quantitative method of mangiferin in rabbit lacrimal fluid as a tool for investigating pre-cornea drug residence

Mangiferin (MGF) has been evidenced to effectively treat infectious diseases caused by Herpes simplex virus, especially on the acyclovir-resistant strains. For ophthalmic disease treatment, prolonging drug retention in the eyes plays an essential role in effectively delivering drugs, which are prone to elimination by eye blinking and tear fluid secretion. The objective of this study was to develop a method for analysis of MGF in tear fluid that can be further utilised to evaluate the kinetics of precornea drug concentration. For sample collection, lacrimal tear fluid was absorbed into pre-weighed absorbing paper strips, which were then immediately weighed again right after sampling to calculate the sample mass. Subsequently, MGF was extracted from the paper strips using a mixture of methanol : acetic acid 0.6% (35:65, v/v). The extracted solution was finally injected into an HPLC system for MGF analysis (RP-column C18 - 4.6 x 250 mm, 5 μm was stabilised at 40oC; moblie phase methanol : acetic acid 0.6%; 35 : 65 (v/v) at a flow rate of 1.0 mL/min; autosampler, injection volume 10 µL; detection wavelength: 258 nm). The developed methodology was validated following the U.S. FDA and ICH M10 guidances for bioanalytical method validation, with respect to system suitability, linearity, recovery, accuracy and precision, dilution integrity and stability. The method was also successfully employed to determine MGF concentration in the tear fluid collected from rabbit eyes at one hour after instilling with MGF suspension. The methodology herein provides a practical tool to investigate kinetics of MGF in tear fluid that can be applied in ophthalmic drug development as well as drug quality evaluation activities.

Development and Validation of a Capillary Zone Electrophoresis-Tandem Mass Spectrometry Method for Simultaneous Quantification of Eight β-Lactam Antibiotics and Two β-Lactamase Inhibitors in Plasma Samples.

Monitoring plasma concentrations of β-lactam antibiotics is crucial, particularly in critically ill patients, where variations in concentrations can lead to treatment failure or adverse events. Standardized antimicrobial regimens may not be effective for all patients, especially in special groups with altered physiological parameters. Pharmacokinetic/pharmacodynamic (PK/PD) studies highlight the time-dependent antibacterial activity of these antibiotics, emphasizing the need for personalized dosing. Therapeutic drug monitoring (TDM) is essential, requiring rapid and accurate analytical methods for precise determination of drugs in biological material (typically plasma or serum). This study presents a novel capillary zone electrophoresis-tandem mass spectrometry (CZE-MS/MS) method designed for the simultaneous quantification of five penicillin antibiotics, two cephalosporins, one carbapenem, and two β-lactamase inhibitors in a single run. The method involves a simple sample pretreatment-precipitation with organic solvent-and has a run time of 20 min. Optimization of CZE separation conditions revealed that 20 mM ammonium hydrogen carbonate (NH4HCO3) serves as the optimal background electrolyte (BGE). Positive electrospray ionization (ESI) mode, with isopropyl alcohol (IP)/10 mM ammonium formate water solution (50/50, v/v) as the sheath liquid, was identified as the optimal condition for MS detection. Method validation according to the Food and Drug Administration (FDA) guideline for development of bioanalytical methods demonstrated satisfactory selectivity, linearity, recovery, robustness, and stability. The method's practicality was evaluated using the Blue Applicability Grade Index (BAGI), yielding a score of 77.5. Moreover, the greenness of the proposed method was evaluated by two commonly used metric tools-Analytical GREEnness (AGREE) and Green Analytical Procedure Index (GAPI). The developed CZE-MS/MS method offers a practical and reliable approach for quantifying a broad spectrum of β-lactam antibiotics in plasma. Its ability to simultaneously quantify multiple analytes in a single run, coupled with a straightforward sample pretreatment, positions it as a valuable and prospective tool for TDM in critically ill patients.

An Isolated Perfused Rat Liver Model: Simultaneous LC-MS Quantification of Pitavastatin, Coproporphyrin I, and Coproporphyrin III Levels in the Rat Liver and Bile.

The isolated perfused rat liver (IPRL) model provides a mechanistic understanding of the organic-anion-transporting polypeptide (OATP/Oatp)-mediated pharmacokinetics in the preclinical evaluation, which often requires the use of control substrates (i.e., pitavastatin) and monitoring endogenous biomarkers (coproporphyrin I and III). This study aimed to develop and validate an LC-MS method allowing the simultaneous quantification of pitavastatin, coproporphyrin I (CPI), and coproporphyrin III (CPIII) in rat liver perfusion matrices (perfusate, liver homogenate, bile). The analysis was performed on a C18 column at 60 °C with 20 μL of sample injection. The mobile phases consisted of water with 0.1% formic acid and acetonitrile with 0.1% formic acid with a gradient flow of 0.5 mL/min. The assay was validated according to the ICH M10 Bioanalytical Method Validation Guideline (2022) for selectivity, calibration curve and range, matrix effect, carryover, accuracy, precision, and reinjection reproducibility. The method allowing the simultaneous quantification of pitavastatin, CPI, and CPIII was selective without having carryover and matrix effects. The linear calibration curves were obtained within various calibration ranges for three analytes in different matrices. Accuracy and precision values fulfilled the required limits. After 60 min perfusion with pitavastatin (1 μM), the cumulative amounts of pitavastatin in the liver and bile were 5.770 ± 1.504 and 0.852 ± 0.430 nmol/g liver, respectively. CPIII was a more dominant marker than CPI in both liver (0.028 ± 0.017 vs 0.013 ± 0.008 nmol/g liver) and bile (0.016 ± 0.011 vs 0.009 ± 0.007 nmol/g liver). The novel and validated bioanalytical method can be applied in further IPRL preparations investigating Oatp-mediated pharmacokinetics and DDIs.

Bioequivalence risk assessment of oral formulations containing racemic ibuprofen through a chiral physiologically based pharmacokinetic model of ibuprofen enantiomers

The characterization of the time course of ibuprofen enantiomers can be useful in the selection of the most sensitive analyte in bioequivalence studies. Physiologically based pharmacokinetic (PBPK) modelling and simulation represents the most efficient methodology to virtually assess bioequivalence outcomes. In this work, we aim to develop and verify a PBPK model for ibuprofen enantiomers administered as a racemic mixture with different immediate release dosage forms to anticipate bioequivalence outcomes based on different particle size distributions. A PBPK model incorporating stereoselectivity and non-linearity in plasma protein binding and metabolism as well as R-to-S unidirectional inversion has been developed in Simcyp®. A dataset composed of 11 Phase I clinical trials with 54 scenarios (27 per enantiomer) and 14,452 observations (7129 for R-ibuprofen and 7323 for S-ibuprofen) was used. Prediction errors for AUC0-t and Cmax for both enantiomers fell within the 0.8–1.25 range in 50/54 (93 %) and 42/54 (78 %) of scenarios, respectively. Outstanding model performance, with 10/10 (100 %) of Cmax and 9/10 (90 %) of AUC0-t within the 0.9–1.1 range, was demonstrated for oral suspensions, which strongly supported its use for bioequivalence risk assessment. The deterministic bioequivalence risk assessment has revealed R-ibuprofen as the most sensitive analyte to detect differences in particle size distribution for oral suspensions containing 400 mg of racemic ibuprofen, suggesting that achiral bioanalytical methods would increase type II error and declare non-bioequivalence for formulations that are bioequivalent for the eutomer.

Adapting Fabric Phase Sorptive Extraction as an Innovative Multitool for Sample Transfer and Extraction in Pharmacokinetic Analysis Followed by LC-MS Determination of Levofloxacin in Plasma Samples.

Fabric phase sorptive extraction (FPSE) is a simple microextraction technique that allows analytes to be rescued from matrix components while using a small volume of samples to analyze complex biological systems. This study used FPSE as a microextraction tool and a sample storage and transfer device. Levofloxacin as a model molecule was applied intravenously (IV) to New Zealand male rabbits. The samples were simultaneously extracted by using FPSE and protein precipitation methods. The final solutions were analyzed using LC-MS equipped with an ACE C18 LC Column (150 mm × 4.6 mm, 5 μm) at 25 °C employed in isocratic elution mode using solution A (0.1% formic acid in water)/solution B (0.1% formic acid in acetonitrile) (80:20, v/v). The total analysis time was less than 15 min. The developed method was validated using the ICH M10 bioanalytical method validation and study sample analysis guidelines. The results obtained using FPSE were statistically identical to those obtained using protein precipitation. The plasma samples applied onto FPSE (10 μL onto 1.0 cm × 1.0 cm Biofluid Sampler) were stored in three different temperatures [refrigerator (2-8 °C), at ambient temperature (20 ± 5 °C), and in the stability cabinet (40 °C, 75% humidity)] and three different storage conditions (Eppendorf tubes, plastic containers, and straw paper envelopes). Levofloxacin in plasma samples adsorbed by FPSE biofluid sampler remained stable at 2-8 °C in Eppendorf tubes for at least 1 week. This study showed that FPSE could be used as a sample storage and transfer device for pharmacokinetic applications that need to work with small sample volumes and discard aggressive cold chains to store and transfer the plasma samples.

A high-throughput UPLC-MS-MS Bio-analytical method for the analysis of veterinary pharmaceutical residues in Chicken Tissues, Application of efficient-valid-green (EVG) Framework as a Competence Tool

Antibacterial medications are receiving the most attention due to hypersensitivity reactions and the emergence of bacterial mutants resistant to antibiotics. Treating Animals with uncontrolled amounts of antibiotics will extend beyond their lives and affect humans. This study aims to determine the concentration of the residues of sulfadimidine, sulfaquinoxaline, diaveridine, and vitamin K3 in the tissues of poultry (muscles and liver) after treatment with the combined veterinary formulation. A UPLC-MS-MS method was developed using Poroshell 120 ECC18 and a mobile phase composed of acetonitrile and distilled water, containing 0.1 % formic acid, in the ratio of (85:15 v/v) at a flow rate of 0.6 mL/min. Sample extraction solvent was optimized using response surface methodology (RSM) to be acetonitrile: methanol in the ratio (49.8: 50.2 v/v), and the method was validated according to the FDA bioanalytical method validation protocol over the range (50–1000 µg/Kg) for sulfaquinoxaline and (50–750 µg/Kg) for the other 3 drugs. The greenness of the sample preparation and analytical method was assessed by applying Analytical Eco-scale (AES) and AGREE coupled with AGREEprep. The Competence of the study was evaluated via the EVG framework known as Efficiency, validation, and greenness, to achieve a balance point represented by a radar chart. The method was applied to decide the time required for poultry products to be safe for human use after administration of the studied drugs. It was found that, after the administration of the last dose, minimally 7 days are required till the levels of the drugs drop to the maximum residue limit determined by the FDA/WHO in animal tissues.

Bioanalytical method development and validation for the quantification of raloxifene hydrochloride from mice plasma by RP-HPLC

Raloxifene hydrochloride (RLX) belongs to the Selective estrogen receptor modulator (SERM) class of drugs, exhibiting diverse affinity to estrogen receptors. The drug is known for its anti-cancer and anti-osteoporosis activity. The current study employs a Reverse Phase High-Performance Liquid Chromatography (RP-HPLC) method that is sensitive and time-efficient for quantitative evaluation of RLX from mice plasma, using tamoxifen citrate as an internal standard (IS). The protein precipitation technique was used to extract the RLX and IS. RLX was separated using a C8 column with an isocratic elution of a mobile phase consisting of acetonitrile and Milli-Q water (pH 3) at a 1 mL/min flow rate. The ultraviolet (UV) detection of the analyte and IS were carried out at 287 nm. The linearity plot was constructed in the range of 100–3200 ng/mL with a correlation coefficient of r2 ≥ 0.9996. The inter-day and intra-day accuracy and precision were found to be within acceptable limits. Stability studies revealed that the analyte remained stable. The validated RP-HPLC method was successfully applied to quantify RLX after oral administration in mice, and the pharmacokinetic (PK) parameters were established. The present RP-HPLC method could be a beneficial tool for the fast and reliable estimation of future PK interactions, PK analysis of formulations, and therapeutic drug monitoring.