Combined Beam Research Articles

Eco-Friendly Isolated Nanocellulose from Seaweed Biomass via Modified-Acid and Electron Beam Process for Biodegradable Polymer Composites

Nanocellulose (NC) has emerged as a promising biodegradable material with applications in various industrial fields owing to its high mechanical strength, thermal stability, and eco-friendly properties. Traditional methods for isolating NC from wood-based biomass (WB) involve high energy consumption and extensive chemical usage, leading to environmental and sustainability concerns. This study explored an alternative approach to isolate NC from seaweed-based biomass (SB) (SNC), which contains fewer non-cellulosic components and a higher cellulose content than WB, thereby yielding a more efficient e-isolation process. We employed a combination of modified-acid solution and electron beam (E-beam) technology to isolate NC from SB. The E-beam process enhanced the crystallinity while reducing the particle size, thus facilitating NC isolation with reduced environmental impact and processing time. Moreover, our method significantly reduced the need for harsh chemical reagents and energy-intensive processes, which are typically associated with traditional NC isolation methods. We fabricated biodegradable films with improved mechanical properties using NC as a reinforcing agent in polymer composites, thereby demonstrating the potential of NC-based materials for various applications. Therefore, our proposed approach offers a sustainable and efficient method for NC isolation and serves as a guide for the development of eco-friendly industrial processes. Our findings contribute to ongoing efforts to create sustainable materials and reduce the environmental footprint of the manufacturing industry.

High sensitivity Mach-Zehnder interferometric fiber-optic humidity sensor based on multimode interference enhancement

Variations in humidity can significantly disrupt the proper functioning of precision instruments and meters across various industrial, medical, and scientific applications, thereby necessitating real-time humidity monitoring. Here, a high sensitivity fiber-optic relative humidity (RH) sensor based on Mach-Zender interferometer (MZI) is proposed and demonstrated. The humidity sensor consists of single-mode fiber (SMF), peanut structure (PS), and multi-mode fiber (MMF). A multi-mode interference (MMI) enhanced fiber-optic MZI was constructed using a SMF-PS-SMF-MMF-SMF-PS-SMF cascade structure to detect small changes in the refractive index (RI) and expansion force of gelatin film caused by humidity variation. PS, as a beam splitter and combiner of MZI, provides the possibility for simple, economical, and efficient manufacturing of the fiber-based part of humidity sensors. The addition of MMF will excite higher-order core and cladding modes, laying the foundation for achieving high-sensitivity fiber-optic humidity sensors. The fiber-optic RH sensor prototype demonstrate a high sensitivity of about 0.633 nm/% RH in the RH range of 50 % RH to 80 % RH, and a low temperature cross-sensitivity of 0.165 % RH/°C. This sensor has the advantages of safe and easy manufacturing process, low manufacturing cost, and high sensitivity, providing continuous high accuracy humidity measurement results for humidity sensing in different fields.

Outcomes of patients with localized prostate cancer treated with combined external beam radiotherapy and high-dose-rate brachytherapy boost: A single-center retrospective study

Abstract Background Temporary prostate brachytherapy, in combination with external beam radiotherapy (EBRT), is an established and evolving treatment technique for non-metastatic, intermediate and high-risk prostate cancer. This study aimed to evaluate the outcomes of patients with localized intermediate and high-risk prostate cancer treated with combined EBRT and high-dose-rate brachytherapy boost (HDR-BT) at a single centre. Patients & Methods A retrospective review of patients who underwent EBRT and HDR-BT treatment between January 2015 and December 2020. Patient and tumor characteristics, treatment outcomes (Kaplan-Meier analysis), and toxicities were analysed. Results 127 patients with intermediate (28.3%) or high-risk (71.7%) prostate cancer were included. Median follow-up was 42 months. Five-year bDFS, CSS and OS rate was 77.5%, 98.1% and 93.0%, respectively, with no significant difference between risk groups. The most frequent toxicity was acute grade 1 urinary obstruction (7.9%). One patient experienced acute and late grade 3 urinary obstruction. No grade ≥4 were observed. Conclusions Combined EBRT and HDR-BT demonstrated favourable disease control rates and manageable toxicities in patients with localized intermediate and high-risk prostate cancer. The 5-year bDFS rate was consistent with previous studies, supporting the effectiveness of this treatment approach. The low incidence of toxicities highlights the conformality and biological efficiency of HDR-BT boost. This treatment strategy provides an effective, safe and convenient option for this group of patients. To the best of our knowledge, this is the first report of the use of helical tomotherapy based intensity-modulated radiation therapy in combination with prostate HDR-BT (81.1% of cases).

Precise maxillofacial soft tissue reconstruction: A combination of cone beam computed tomography and 3dMD photogrammetry system

IntroductionThe reconstruction of both extra- and intra-oral soft tissue defects, particularly in restoring the morphology of the lip and the corners of the mouth, has posed a significant challenge for surgeons. Inappropriate methods often lead to maxillofacial deformity which then causes psychological and functional problems. This study aimed to address the challenge of reconstructing extensive and complex maxillofacial soft tissue defects, mainly focusing on the lip, the corners of the mouth, and the surrounding areas. Materials and methodsWe developed a reconstruction approach by combining the 3dMDface System (3dMD) with the cone beam computed tomography (CBCT). Firstly, with the extra-oral incision line, we evaluated the shape and the size of the extra-oral defect with 3dMD digitally. Then we used the corresponding maxillary and mandible tooth positions to record the intra-oral defect, which was then converted to digital images by combining 3dMD and CBCT. The islands of the anterolateral thigh perforator flap were then designed after the locations of the perforators were detected with Doppler ultrasonography. ResultsA clinical case diagnosed as dermatofibrosarcoma protuberans was presented to illustrate the approach. The patient's tumor resection and the size of multiple defects were measured and simulated via the virtual surgery system. A three-island perforator flap from the descending branch of the lateral femoral circumflex artery was designed accurately. Two weeks postoperatively, the flap was healed as anticipated and the patient was satisfied with the profile. ConclusionThe combination of the 3dMD and CBCT technologies improves the accuracy and fitness of extra- and intra-oral soft tissue reconstruction.

Turbidity-tolerant underwater wireless optical communications using dense blue–green wavelength division multiplexing

Underwater wireless optical communication (UWOC) has demonstrated high-speed and low-latency properties in clear and coastal ocean water because of the relatively low attenuation ‘window’ for blue–green wavelengths from 450 nm to 550 nm. However, there are different attenuation coefficients for transmission in ocean water at different wavelengths, and the light transmission more seriously deteriorates with fluctuations in the water turbidity. Therefore, traditional UWOC using a single wavelength or coarse blue–green wavelengths has difficulty tolerating variations in water turbidity. Dense wavelength division multiplexing (WDM) technology provides sufficient communication channels with a narrow wavelength spacing and minimal channel crosstalk. Here, we improve the UWOC in clear and coastal ocean water using dense blue–green WDM. A cost-effective WDM emitter is proposed with directly modulated blue–green laser diodes. Dense wavelength beam combination and collimation are demonstrated in a 20-metre underwater channel from 490 nm to 520 nm. Demultiplexing with a minimum channel spacing of 2 nm is realized by an optical grating. Remarkably, our WDM results demonstrate an aggregate data rate exceeding 10 Gbit/s under diverse water turbidity conditions, with negligible crosstalk observed for each channel. This is the densest WDM implementation with a record channel spacing of 2 nm and the highest channel count for underwater blue–green light communications, providing turbidity-tolerant signal transmission in clear and coastal ocean water.

Performance evaluation and investigation of diffraction optical elements effect on bit error rate of free space optics and performance investigation of space uplink wireless optical communication under varying atmospheric turbulence conditions

AbstractSeveral other optical antenna topologies have been developed and implemented throughout the years. These topologies include a variety of optical components, including the axicon optical element, dual‐secondary mirror, cone reflecting mirror, prism beam slier, and beam‐splitter/beam combiner. In contrast, the secondary reflecting mirror causes an obscuration loss that must be compensated for by reducing the transmission power in an optical antenna design. In order to address this issue in space optical communication, the present research helps to develop an enhanced two diffractive optical elements (DOEs) technology however the data presented therein only shows that DOEs may boost transmission power efficiency, which is insufficient for system designers. Though On‐Off Keying (OOK) is widely used in optical communication systems at the moment, the proposed research include DOEs into an OOK space uplink optical. The proposed research uses numerical simulation to explore how much a space uplink OOK system's bit error rate (BER) may be improved by using DOEs and adjusting fundamental parameters. The proposed BER model takes environmental factors like wind and detector noise into account. Using this theoretical model, the present work helps to investigate the effect of DOEs on the BER versus fundamental parameter characteristic curves in space uplink optical communication. Based on the findings, the DOEs structure has the potential to significantly enhance the BER performance of space uplink optical communication systems, especially at high obscuration ratios. When the obscuration ratio is 0.25, 0.167, or 0.125 and the transmission power is 1 W, for instance, the DOEs may improve the BER by a factor of two or one order of magnitude or less when the parameters are changed to the typical parameter values as specified. Results increase by a factor of six, three, and two orders of magnitude, respectively, when transmitting at 5 W. The results show that DOEs can significantly enhance the BER performance, especially at high obscuration ratios. The findings suggest that integrating DOEs into the optical subsystem is a straightforward approach to improving the performance of space uplink optical communication systems.

Rigid-Elastic Combined Metamaterial Beam With Tunable Band Gaps for Broadband Vibration Suppression

Abstract Extensive research efforts have been dedicated to exploring the application of metamaterial beams for vibration suppression. However, most existing designs primarily focused on utilizing the translational motion of local resonators to create band gaps. To address this limitation of employing solo motion to induce a relatively narrow band gap, this study proposes a novel design: a rigid-elastic combined metamaterial beam utilizing both translational and rotational motions of local resonators. Theoretical framework development involves extending the transfer matrix method to incorporate rigid bodies, with analytical results validated through finite element simulations and experimental data. Compared to conventional metamaterial beams, the proposed design exhibits an additional wide band gap in the low-frequency region that can be utilized for broadband vibration suppression. A parametric study elucidates the influences of geometric parameters on band gap formation, followed by an exploration of the tunability of the proposed meta-beam through a graded scheme and optimization strategy. In particular, a multiple-objective optimization approach is employed to enlarge the vibration suppression region and enhance vibration suppression ability. The optimized meta-beam demonstrates a remarkable 45% wider dominant suppression region and a 14% lower average transmittance compared to a uniform model.

Analysis and Optimization of Error Tolerance in an Incoherent Beam Combination System

Analysis and Optimization of Error Tolerance in an Incoherent Beam Combination System

Pencil Beams and High-Precision Aiming of Wireless Power

Wireless Power Transfer (WPT) is the technique of delivering energy to specific targets with high-gain antennas. An important global application is SpaceBased Solar Power (SBSP) in which powersats in Earth orbit gather sunlight and beam this power to terrestrial groundstations (rectennae). At the distances involved, and the power levels needed to be economical, any stray (off-axis or off-target) energy can disrupt communications, giving cause for regulatory restriction or public objection of SBSP. Until recently, sidelobe levels (SLL) were limited to no lower than -60 dB, meaning that a gigawatt beam would give off kilowatt-range SLL, leading to desensitization of communications devices for a very wide radius surrounding a rectenna. The author discovered, published, and validated a specific design for a phased array antenna (PAA) that allows SLL to be reduced to -240 dB, creating what is called a "pencil beam" with negligible off-axis energy. Studies have found that this method can be applied to PAA as small as 6 m diameter at 5.8 GHz. This breakthrough discovery was first published in 2016 but appears to have largely escaped notice by the WPT community. The second issue is aiming accuracy, with the de facto solution being phase conjugation at the transmit PAA using a pilot beam issued from the receiver. While elegant, the accuracy of angle of arrival (AOA) using phase conjugtion is limited to about 1 degree (17 milliradians). This is sufficient for 5G signals over 100s of meters, but grossly inadequate for SBSP that requires microradian pointing accuracy. A novel method to detect AOA at the microrad scale that is separated from the transmitter emission electronics allows independent optimization of both. This work presents simulation studies showing microradian capability and laboratory results in the single millirad range, a factor of 10 improvement over the current state of the art. With this new approach, an orbiting powersat can aim its beam to a terrestrial target with stability under 100 m with off-axis energy at -127 dBm (typical surface environments are -100 to -80 dBm). The combination of a pencil beam and highly-accurate AOA detection bode well for realizing the benefits of SBSP.

Single-step phase identification and phase locking for coherent beam combination using deep learning

Coherent beam combination offers a solution to the challenges associated with the power handling capacity of individual fibres, however, the combined intensity profile strongly depends on the relative phase of each fibre. Optimal combination necessitates precise control over the phase of each fibre channel, however, determining the required phase compensations is challenging because phase information is typically not available. Additionally, the presence of continuously varying phase noise in fibre laser systems means that a single-step and high-speed correction process is required. In this work, we use a spatial light modulator to demonstrate coherent combination in a seven-beam system. Deep learning is used to identify the relative phase offsets for each beam directly from the combined intensity pattern, allowing real-time correction. Furthermore, we demonstrate that the deep learning agent can calculate the phase corrections needed to achieve user-specified target intensity profiles thus simultaneously achieving both beam combination and beam shaping.

The investigation on flexural performance of prestressed concrete-encased high strength steel beams

This paper reports an experimental on the flexural performance of prestressed concrete-encased high-strength steel beams (PCEHSSBs). To study the applicability of high-strength steel (HSS) in prestressed concrete-encased steel beams (PCESBs), one simply supported prestressed concrete-encased ordinarystrength steel beam (PCEOSSB) and eight simply supported PCEHSSBs were tested under a four-point bending load. The influence of steel strength grade, I-steel ratio, reinforcement ratio and stirrup ratio on the flexural performance of such members was investigated. The test results show that increasing the I-steel grade and I-steel ratio can significantly improve the bearing capacity of PCESB. Increasing the compressive reinforcement ratio of PCEHSSB can effectively improve its bearing capacity and ductility properties, making full use of the performance of HSS in composite beams. Increasing the hoop ratio has a small improvement on the load capacity of the test beams; setting up shear connectors can improve the ductile properties of the specimens although it does not lead to a significant increase in the load capacity of the combined beams. Then, combined with the test data, the comprehensive reinforcement index considering the location of reinforcement was proposed to evaluate the crack resistance of specimens. The relationship between the comprehensive reinforcement index and the crack resistance of specimens was given.

Study on the flexural behaviour of the concrete filled square steel tube beam with the basic magnesium sulfate cement-based composite shell system

A new type of stay-in-place formwork (SIPF) concrete beam was proposed; this beam consists of a U-shaped shell made of basic magnesium sulfate cement-based composite (BMSCC), a perforated square steel pipe and core concrete. The prefabricated shell and square steel pipe form a composite SIPF, the steel pipe replaces the longitudinal reinforcement and hoop reinforcement, and the combination beam can be formed after pouring the core concrete inside. Four-point bending tests of two SIPF beams and one reinforced concrete (RC) comparison beam were conducted using longitudinal steel consumption as a parameter. The results showed that the SIPF beams exhibited a typical ductile damage pattern and that the precast shell was reliably bonded to the core concrete without spalling. The cracking load was increased by 198.25 %, the yield load by 66.3 %, and the ultimate load by 64.7 % for the same amount of steel used in the steel pipe instead of the reinforcing cage. After the equivalent longitudinal reinforcement rate of 1 % at the bottom of the SIPF beam was increased to 1.25 %, the flexural capacity increased by 9.65 %. By introducing the restraining stress coefficient and stiffness contribution coefficient, a formula for calculating the flexural capacity of the positive section of the SIPF beam was established.

A 600 m2 array of 6.5 m telescopes at the lunar pole.

The proposed lunar telescope for optical and infrared astronomy aims at very large aperture, 600 m2, at a fundable cost. It comprises an array of 18 separate telescopes, each of 6.5 m aperture. The 200 m diameter array will be located within 1/2° (15 km) of a lunar pole on approximately level ground, with a perimeter screen deployed to provide shade and cooling to cryogenic temperature. The 500 m diameter screen will allow unobscured access down to 8° elevation. All 18 telescopes will reflect light into a central beam combiner to form a single image covering wavelengths from 0.4 µm to 10 µm. The initial instrument complement will include high-resolution and multi-object spectrographs to exploit the single combined field of view of two arcminute diameter, with the diffraction limited resolution of 6.5 m aperture. Scientific applications include the search for molecular biosignatures in transiting exoplanets, and the study of galaxy evolution using red-shifted spectra to beyond z = 10. The array cost, including delivery to the Moon by SpaceX Starship for installation using lunar base infrastructure, is around $10 billion, similar to that of the 25 m2 JWST. To test the concept, first a single prototype 6.5 m unit would be operated at the lunar south pole. This article is part of a discussion meeting issue 'Astronomy from the Moon: the next decades (part 2)'.

Coherent Imaging with Photonic Lanterns

Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multimode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multimode telescope light into a multimode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pupil, analogous to subapertures in aperture masking interferometry (AMI). Coherent imaging with PLs can be enabled by the interference of SMF outputs and applying phase modulation, which can be achieved using a photonic chip beam combiner at the backend (e.g., the ABCD beam combiner). In this study, we investigate the potential of coherent imaging by the interference of SMF outputs of a PL with a single telescope. We demonstrate that the visibilities that can be measured from a PL are mutual intensities incident on the pupil weighted by the cross correlation of a pair of lantern modes. From numerically simulated lantern principal modes of a 6-port PL, we find that interferometric observables using a PL behave similarly to separated-aperture visibilities for simple models on small angular scales (<λ/D) but with greater sensitivity to symmetries and capability to break phase angle degeneracies. Furthermore, we present simulated observations with wave front errors (WFEs) and compare them to AMI. Despite the redundancy caused by extended lantern principal modes, spatial filtering offers stability to WFEs. Our simulated observations suggest that PLs may offer significant benefits in the photon-noise-limited regime and in resolving small angular scales at the low-contrast regime.

A Randomized Trial Comparing Quality of Life After Low-Dose Rate or High-Dose Rate Prostate Brachytherapy Boost With Pelvic External Beam Radiation Therapy

Purpose/ObjectivesTo compare health-related Quality of Life (QoL) in urinary, bowel and sexual domains after combined external beam radiotherapy (EBRT) and either low dose rate (LDR) or high dose rate (HDR) prostate brachytherapy (BT). Materials/MethodsEligible men with intermediate or high-risk prostate cancer, treated with combined pelvic EBRT and BT were randomly assigned to either HDR (15 Gy) or LDR (110 Gy) boost. International Prostate Symptom Score (IPSS), Index of Erectile Function (IIEF), Expanded Prostate Cancer Composite (EPIC-26) were collected at baseline, 1,3,6 and 12 months, q6 months to 3 years and then annually along with PSA/testosterone. Fisher's exact test compared categorical variables and the Mann Whitney U test EPIC domain scores. ResultsFrom 01/2014 to 12/2019, a random number generator assigned 195 men: 108 to HDR and 87 to LDR. Median age was 71 years. Risk group was high in 57% and unfavorable intermediate in 43%. Androgen deprivation (used in 74%) began with 3 months neoadjuvant and continued for median 12 months. Baseline EPIC scores were similar for the LDR/HDR cohorts: 89/88 for GU and 92/93 for GI. EPIC urinary scores decreased at one month for HDR but recovered promptly to a steady state by 6 months. LDR scores reached a nadir at 3 months with slow recovery to 18 months, after which urinary QoL was similar for HDR and LDR. Bowel QOL scores fell in both cohorts reaching respective nadirs at 12 months. HDR patients recovered close to baseline and maintained higher scores than LDR patients to 5 years. The decline for LDR patients remained > the MCID out to 5 years. ConclusionsPatient experience for combined EBRT and prostate BT is improved with HDR BT. Urinary QoL improves over time to be equivalent between the 2 modalities after 18 months, but LDR patients report lasting bowel symptoms.

Miniaturizing a coherent beam combining system into a compact laser diode module.

We present a laser module with dimensions of 76×43×15m m 3 that for the first time to our knowledge realizes a coherent beam combination in such a compact device, using two tapered amplifiers seeded by a distributed Bragg reflector ridge waveguide laser diode operating at 761nm in a single longitudinal mode. The generated combined optical power is up to 5W continuous wave with a combing efficiency of 85%. The phase of the system is controlled by the current in the ridge waveguide section of one of the tapered amplifiers. The phase-stabilization process is automated using a reverse hill-climbing algorithm and an ATmega328P microcontroller.

Personnel dosimetry for the mixed beta (Kr-85)/photon (gamma, X-ray) beams using Harshaw 8814 TL dosimeters: Performance Test Applicability Study

Performance of Harshaw 8814 TL dosimeters was evaluated in the mixture of low energy beta (Kr-85, average energy 251 keV) and X-ray/gamma photon beams, when many doses obtained using existing dose calculation algorithms show a high bias. 264 TLDs were exposed at the Radiological and Environmental Sciences Laboratory to the pure Kr-85 energy beam as well as to different combinations of beta and photon beams of various energies (including Cs-137 and Co-60 gamma sources and M50, M200 and H300 X-ray beams). The TLDs were irradiated to different beta-to-photon dose ratios; 22 different combinations of radiation energy beams and beam dose ratios were tested. After exposure, the TLDs were readout at Brookhaven National Laboratory facility using a Harshaw 8800 reader. The doses were determined with the Harshaw Combined DOELAP dose calculation algorithm and compared to the known values. The results showed a significant deviation from the corresponding nominal values for some of the tested TLDs exposed to pure Kr-85 or a combination of Kr-85 and photon beam mixed energies. The different ratios of TL signals from chips 1–4 of the 8814 TL cards were analyzed, and an algorithm was proposed to identify the radiation beam energy to which each individual TLD was irradiated to. Finally, correction coefficients were developed which improves the performance of TL dosimetry dose calculation algorithm in the cases of exposure to a low energy beta beam and to a mixture of such beam with photons.

Photonic integrated coherent beam combiner based on MMI and the SPGD algorithm.

Atmospheric turbulence severely degrades the optical wavefront of a propagating beam, which greatly reduces the coupling efficiency of free-space optical (FSO) receivers. Among the various methods to mitigate the effects, the use of a multi-channel receiver is more convenient and economical. After passing through the multi-channel receiver, multiple single-mode fibers (SMFs) are output and need to be combined. In this paper, we propose photonic integrated coherent beam combiners based on multimode interference (MMI) and the stochastic parallel gradient descent (SPGD) algorithm, which avoids detecting the light out of each channel and adding the data signal in the electrical domain. First, we propose a 4-channel coherent beam combiner based on a 4×1 MM, and about 21 iterations of the SPGD algorithm are required to enhance the combined optical power to a maximum of 96%. Furthermore, we demonstrate a combination of 16 beams using five 4×1 MMIs, which requires 140 iterations to enhance the combined power to 89%. This study offers theoretical insights to enhance the integration of FSO communication systems.

Heimdallr, Baldr, and Solarstein: designing the next generation of VLTI instruments in the Asgard suite

High angular resolution imaging is an increasingly important capability in contemporary astrophysics. Of particular relevance to emerging fields such as the characterization of exoplanetary systems, imaging at the required spatial scales and contrast levels results in forbidding challenges in the correction of atmospheric phase errors, which in turn drives demanding requirements for precise wavefront sensing. Asgard is the next-generation instrument suite at the European Southern Observatory’s Very Large Telescope Interferometer (VLTI), targeting advances in sensitivity, spectral resolution, and nulling interferometry. In this paper, we describe the requirements and designs of three core modules: Heimdallr, a beam combiner for fringe tracking, low order wavefront correction, and visibility science; Baldr, a Zernike wavefront sensor to correct high order atmospheric aberrations; and Solarstein, an alignment and calibration unit. In addition, we draw generalizable insights for designing such system and discuss integration plans.

Bessel-Gauss coherently combined beams.

The application of a conical wavefront in the near field of the tiled aperture coherent beam combination (CBC) produces a segmented, similar to Bessel-Gauss irradiance pattern (BG-CBC), in the far field. The properties of such a structured optical field were numerically investigated. In contrast to that for the classical CBC, the power diffracted beyond the 'zero' BG-CBC diffraction order is more smoothly and homogenously distributed, not evidencing sharp maxima and dark regions typical for CBC. The novelty of the BG-CBC with segmented conical wavefront is a simple way of caustics elongation and redistribution of power density for the same CBC architecture.