Cathode Material For Batteries Research Articles

Crystalline MnCO3@Amorphous MnOx Composite as Cathode Material for High-Performance Aqueous Zinc-Ion Batteries.

Rechargeable aqueous zinc-ion batteries (RAZIBs) have received extensive attention because of their advantages of low cost, high safety, and nontoxicity. However, problems such as dissolution of the active cathode material, dendrites/passivation of the zinc anode, and slow reaction kinetics hindered their further applications. In this work, a crystalline/amorphous composite-type material composed of crystalline MnCO3 and amorphous MnOx was prepared and used as the cathode material for RAZIBs. The MnCO3@amorphous MnOx (MnCO3@A-MnOx) composite possesses the merits of both the pure crystalline phase of MnCO3 and the amorphous phase of MnOx, which can deliver better electrochemical performance than the corresponding single component in repeated cycles. In addition, crystalline MnCO3 undergoes a complex phase transition to the active MnO2 during the first charge process, providing the composite with a stable structure and additional electrochemical capacity. The electrochemical measurement results indicate that the MnCO3@A-MnOx electrode can display high reversible discharge capacity at 0.1 A g-1, excellent rate performance at 5.0 A g-1, and long cycling stability over 2000 cycles, showing great potential as a cathode material for high-performance RAZIBs.

Regulating Interfacial Compositions to Build a Stable Superlattice Structure of Layered Oxide Cathode Materials for Sodium-Ion Batteries

Regulating Interfacial Compositions to Build a Stable Superlattice Structure of Layered Oxide Cathode Materials for Sodium-Ion Batteries

Reducing Voltage Hysteresis in Li-Rich Sulfide Cathodes by Incorporation of Mn.

Conventional intercalation-based cathode materials in Li-ion batteries are based on charge compensation of the redox-active cation and can only intercalate one mole of electron per formula unit. Anion redox, which employs the anion sublattice to compensate charge, is a promising way to achieve multielectron cathode materials. Most anion redox materials still face the problems of slow kinetics and large voltage hysteresis. One potential solution to reduce voltage hysteresis is to increase the covalency of the metal-ligand bonds. By substituting Mn into the electrochemically inert Li1.33Ti0.67S2 (Li2TiS3), anion redox can be activated in the Li1.33-2y/3Ti0.67-y/3Mn y S2 (y = 0-0.5) series. Not only do we observe substantial anion redox, but the voltage hysteresis is significantly reduced, and the rate capability is dramatically enhanced. The y = 0.3 phase exhibits excellent rate and cycling performance, maintaining 90% of the C/10 capacity at 1C, which indicates fast kinetics for anion redox. X-ray absorption spectroscopy (XAS) shows that both the cation and anion redox processes contribute to the charge compensation. We attribute the drop in hysteresis and increase in rate performance to the increased covalency between the metal and the anion. Electrochemical signatures suggest the anion redox mechanism resembles holes on the anion, but the S K-edge XAS data confirm persulfide formation. The mechanism of anion redox shows that forming persulfides can be a low hysteresis, high rate capability mechanism enabled by the appropriate metal-ligand covalency. This work provides insights into how to design cathode materials with anion redox to achieve fast kinetics and low voltage hysteresis.

Predominant P3-Type Solid-Solution Phase Transition Enables High-Stability O3-Type Na-Ion Cathodes.

Layered O3-type oxides are one of the most promising cathode materials for Na-ion batteries owing to their high capacity and straightforward synthesis. However, these materials often experience irreversible structure transitions at elevated cutoff voltages, resulting in compromised cycling stability and rate performance. To address such issues, understanding the interplay of the composition, structure, and properties is crucial. Here, we successfully introduced a P-type characteristic into the O3-type layered structure, achieving a P3-dominated solid-solution phase transition upon cycling. This modification facilitated a reversible transformation of the O3-P3-P3' structure with minimal and gradual volume changes. Consequently, the Na0.75Ni0.25Cu0.10Fe0.05Mn0.15Ti0.45O2 cathode exhibited a specific capacity of approximately 113 mAh/g, coupled with exceptional cycling performance (maintaining over 70% capacity retention after 900 cycles). These findings shed light on the composition-structure-property relationships of Na-ion layered oxides, offering valuable insights for the advancement of Na-ion batteries.

Surface Pinning of Mn by Oxidation State Control for the Synthesis of Cobalt-Free, Ni-Rich, Core/Shell Structured Cathode Materials.

Motivated by the increasing cost, environmental concerns, and limited availability of Co, researchers are actively seeking alternative cathode materials for lithium-ion batteries. A promising strategy involves structure-modified materials, such as a NiMn core/shell system. This design leverages the high energy density of a Ni-rich core while employing an Mn-rich shell to enhance interfacial stability by suppressing unwanted reactions with the electrolyte. This approach offers improved cycling stability and reduced reliance on Co. However, the interdiffusion of Mn ions between the core and shell remains a significant challenge during synthesis. This work presents a facile approach to address the issue of Mn interdiffusion in core/shell cathode materials. The study demonstrates that partial oxidation of the precursor during the drying stage effectively enhances the Mn oxidation state. This strategy successfully suppresses Mn interdiffusion during subsequent calcination, leading to the preservation of the core/shell architecture in the final cathode material. This optimized structure mitigates interfacial reactions, enhances chemomechanical properties, and reduces crosstalk, a major contributor to rollover failure. This work presents a novel approach for synthesizing high-performance core/shell cathode materials for next-generation lithium-ion batteries.

Four-Electron Redox Reaction in Prussian Blue Analogue Cathode Material for High-Performance Sodium-Ion Batteries

Four-Electron Redox Reaction in Prussian Blue Analogue Cathode Material for High-Performance Sodium-Ion Batteries

Revisit of Polyaniline as a High-Capacity Organic Cathode Material for Li-Ion Batteries.

Polyaniline (PANI) has long been explored as a promising organic cathode for Li-ion batteries. However, its poor electrochemical utilization and cycling instability cast doubt on its potential for practical applications. In this work, we revisit the electrochemical performance of PANI in nonaqueous electrolytes, and reveal an unprecedented reversible capacity of 197.2 mAh g-1 (244.8 F g-1) when cycled in a wide potential range of 1.5 to 4.4 V vs. Li+/Li. This ultra-high capacity derives from 70% -NH- transformed to =NH+- during deep charging/discharging process. This material also demonstrates a high average coulombic efficiency of 98%, an excellent rate performance with 73.5 mAh g-1 at 1800 mA g-1, and retains 76% of initial value after 100 cycles, which are among the best reported values for PANI electrodes in battery applications.

Exploring the Molecular-Scale Structures at Solid/Liquid Interfaces of Li-Ion Battery Materials: A Force Spectroscopy Analysis with Sparse Modeling.

In this study, we clarify the liquid structure formed at the interface between LiCoO2 (LCO), the cathode material of Li-ion batteries, and propylene carbonate (PC), which is used as a solvent in the electrolyte, on a molecular scale. We apply sparse modeling-based modal analysis to force spectroscopy data measured by frequency modulation atomic force microscopy (FM-AFM) and show that each component in the FM-AFM force curve, such as oscillatory solvation force, background, and noise, can be automatically decomposed. Moreover, by combining detailed force curve analysis with solid/liquid interface simulations based on first-principles calculation, we have identified that there are distinct damped vibrational modes in the force curves at the LCO/PC interface with a period of about 0.57 nm and those with shorter periods, which likely correspond to the solvation forces associated with bulk-state PC molecules and those with PC molecules in "lying down" orientations.

Exploration of Mixed Polyanionic Compound for Potential High-Voltage Cathode Materials in Sodium-Ion Batteries

Exploration of Mixed Polyanionic Compound for Potential High-Voltage Cathode Materials in Sodium-Ion Batteries

Insight into the effects of gas molecules-adsorbed on 2D-FeS2: A DFT study

Lithium-sulfur (Li-S) batteries are especially competitive in the energy sector due to their excellent performances, like preferable energy density and economic benefits. Studying the adsorption of gas molecules on electrode materials has potential engineering significance for Li-S batteries since they have a highly osmotic potential, which causes unavoidable damage to batteries. In this work, the adsorption phenomenon of common gas molecules (H2O, N2, H2, CO2, and O2) on the two-dimensional pyrite (2D-FeS2) cathode material surface, as well as the effects on the electronic and electrochemical properties, were investigated by the first-principles calculations. The adsorption capabilities were estimated by adsorption energy and Mulliken population analysis. Simulation results demonstrated that whole adsorption energies were less than -1.0 eV and larger than -0.6 eV, which shows a physisorption nature. Among them, the O-S bond of O2/2D-FeS2 has the strongest strength. Electronic structure calculations suggested that 2D-FeS2 maintained good conductivity after gas molecules were adsorbed, achieving efficient transfer between electron, lithium, and sulfur intermediates. Additionally, ab initio molecular dynamics (AIMD) simulations showed that Li+ exhibits excellent diffusion performance and low activation energy at different temperatures. 2D-FeS2 still has a stable electrochemical working window (1.87 ∼ 2.47 V), while the theoretical open current voltage is damaged by gas molecule adsorption. Consequently, this work theoretically reveals the effect of gas molecules on the cathode materials for Li-S batteries, which has guide meaning for engineering.

High-Entropy Configuration Strategy to Build High Performance Na-Ion Layered Oxide Cathodes Derived from Simple Techniques.

Layered transition metal oxides are commonly used as the cathode materials in sodium-ion batteries due to their low cost and easy manufacturing. However, the application is hindered by poor rate performance and complex phase transitions. To address these challenges, a new seven-component high-entropy layered oxide cathode material, O3-NaNi0.25Fe0.15Mn0.3Ti0.1Sn0.05Co0.05Li0.1O2 (HEO) has been developed. The entropy stabilization effect plays a crucial role in improving the performance of electrochemical systems and the stability of structures. The HEO exhibits a specific discharge capacity of 154.1 mA h g-1 at 0.1 C and 94.5 mA h g-1 at 7 C. In-situ and ex-situ XRD results demonstrate that the HEO effectively retards complex phase transitions. This work provides a high-entropy design for the storage materials with a high energy density. Meanwhile, it eliminates industry doubts about the performance of sodium ion layered oxide cathode materials.

Mesoporous hollow Fe4[Fe(CN)6)]3 hierarchical nanocrystal architecture for advanced sodium-ion batteries

Prussian blue (PB) has been broadly recognized as promising cathode materials for sodium-ion batteries (SIBs) due to its large interstitial space and robust frame structure, whereas their applications are impeded by unsatisfied long-term cyclability and poor rate capability due to its inherent lattice defects. Herein, we report to fabricate the mesoporous hollow Fe4(Fe(CN)6)3 (one kind of PB) hierarchical nanocrystal architecture by the hydrothermal crystallization and HCl etching of the mesoporous precursor Fe4[Fe(CN)6]3 cubic particles, leading to high crystallinity and large specific surface area. The resultant Fe4[Fe(CN)6]3 cathode for SIBs exhibits a good reversibility and cycling stability with a capacity retention of 75.6 % at 0.5 C after 200 cycles as well as superb rate capability featuring a stable discharge specific capacity of 30.2 mAh g−1 at as high as 10 C, demonstrating the fast kinetics and low polarization of electrochemical reaction, which might be ascribed to the unique architecture and high crystallinity. This offers a new route to designing PB cathode of for SIBs with high rate capabilities.

A Comprehensive Review on Strategies for Enhancing the Performance of Polyanionic-Based Sodium-Ion Battery Cathodes.

The significant consumption of fossil fuels and the increasing pollution have spurred the development of energy-storage devices like batteries. Due to their high cost and limited resources, widely used lithium-ion batteries have become unsuitable for large-scale energy production. Sodium is considered to be one of the most promising substitutes for lithium due to its wide availability and similar physiochemical properties. Designing a suitable cathode material for sodium-ion batteries is essential, as the overall electrochemical performance and the cost of battery depend on the cathode material. Among different types of cathode materials, polyanionic material has emerged as a great option due to its higher redox potential, stable crystal structure, and open three-dimensional framework. However, the poor electronic and ionic conductivity limits their applicability. This review briefly discusses the strategies to deal with the challenges of transition-metal oxides and Prussian blue analogue, recent developments in polyanionic compounds, and strategies to improve electrochemical performance of polyanionic material by nanostructuring, surface coating, morphology control, and heteroatom doping, which is expected to accelerate the future design of sodium-ion battery cathodes.

Double gradient coupling heterostructure design accurately regulates the anion process of the Li-rich cathode

Lithium-rich layered oxides are regarded as the next generation of cathode materials for lithium-ion batteries due to their high capacity and high operating voltage. However, the release of oxygen at high voltage has caused serious failure problems, severely limiting the commercial application of lithium-rich cathode materials. As the irreversible release of oxygen occurs first at the surface of the particles, the change in structure at the surface is also more drastic. In response to the variability of anion redox processes from surface to interior in the particles, a coupling strategy of Al, oxygen vacancies double gradient and spinel heterostructure was designed. The high concentration of oxygen vacancies and Al on the surface inhibits excessive oxidation of lattice oxygen and oxygen release. The surface heterostructure improves the reaction kinetics and increases the activity and reversibility of the electrode process. The concentration of oxygen vacancies and Al in the interior ensures highly active anionic redox and further enhances structural stability. The specific capacity (0.13 mAh/g/cycle) and voltage (1.34 mV/cycle) decay of the modified material is greatly reduced. In-situ and ex-situ characterisations were used to analyse the modification mechanism, which can effectively guide the improvement of lithium-rich cathode material performance.

Multi-metal ions co-regulated vanadium oxide cathode toward long-life aqueous zinc-ion batteries

Interlayer intercalation engineering shows great feasibility to improve the structure stability of the layered oxides. Although high Zn-storage capability has been attained based on the pillar effect of multifarious intercalants, an in-depth understanding the synergistic effect of intercalated multiple metal ions is still in deficiency. Herein, alkali metal ion K+, alkaline earth metal ion Mg2+ and trivalent metal ion Al3+ are introduced into the VO interlayer of V2O5. Due to the different electronegativity and hydrated ion radius of K+, Mg2+ and Al3+, adjusting the relative proportions of these metal ions can achieve an appropriate interlayer spacing, stable layer structure and regular morphology, which facilitates the transport kinetics of Zn2+. Under the synergistic effect of pre-intercalated multi-metal ion, the optimal tri-metal ion intercalated hydrated V2O5 cathode exhibits a high specific capacity of 382.4 mAh g−1 at 0.5 A g−1, and long-term cycling stability with capacity retention of 86 % after 2000 cycles at the high current density of 10 A g−1. Ex-situ and kinetic characterizations reveal the fast charge transfer and reversible Zn2+ intercalation mechanism. The multi-ion engineering strategy provides an effective way to design desirable layered cathode materials for aqueous zinc-ion batteries.

Manipulating Local Chemistry and Coherent Structures for High-Rate and Long-Life Sodium-Ion Battery Cathodes.

Layered sodium transition-metal (TM) oxides generally suffer from severe capacity decay and poor rate performance during cycling, especially at a high state of charge (SoC). Herein, an insight into failure mechanisms within high-voltage layered cathodes is unveiled, while a two-in-one tactic of charge localization and coherent structures is devised to improve structural integrity and Na+ transport kinetics, elucidated by density functional theory calculations. Elevated Jahn-Teller [Mn3+O6] concentration on the particle surface during sodiation, coupled with intense interlayer repulsion and adverse oxygen instability, leads to irreversible damage to the near-surface structure, as demonstrated by X-ray absorption spectroscopy and in situ characterization techniques. It is further validated that the structural skeleton is substantially strengthened through the electronic structure modulation surrounding oxygen. Furthermore, optimized Na+ diffusion is effectively attainable via regulating intergrown structures, successfully achieved by the Zn2+ inducer. Greatly, good redox reversibility with an initial Coulombic efficiency of 92.6%, impressive rate capability (86.5 mAh g-1 with 70.4% retention at 10C), and enhanced cycling stability (71.6% retention after 300 cycles at 5C) are exhibited in the P2/O3 biphasic cathode. It is believed that a profound comprehension of layered oxides will herald fresh perspectives to develop high-voltage cathode materials for sodium-ion batteries.

Constructing a Size-Controllable Spherical P2-Type Layered Oxides Cathode That Achieves Practicable Sodium-Ion Batteries.

P2-type layered metal oxides are regarded as promising cathode materials for sodium-ion batteries due to their high voltage platform and rapid Na+ diffusion kinetics. However, limited capacity and unfavorable cycling stability resulting from inevitable phase transformation and detrimental structure collapse hinder their future application. Herein, based on P2-type Na0.67Ni0.18Mn0.67Cu0.1Zn0.05O2, we synthesized a series of secondary spherical morphology cathodes with different radii derived from controlling precursors prepared by a coprecipitation method, which can be promoted to large-scale production. Consequently, the synthesized materials possessed a high tap density of 1.52 g cm-3 and a compacted density of 3.2 g cm-3. The half cells exhibited a specific capacity of 111.8 mAh g-1 at a current density of 0.1 C as well as an 82.64% capacity retention with a high initial capacity of 85.80 mAh g-1 after 1000 cycles under a rate of 5 C. Notably, in situ X-ray diffraction revealed a reversible P2-OP4 phase transition and displayed a tiny volume change of 6.96% during the charge/discharge process, indicating an outstanding cycling stability of the modified cathode. Commendably, the cylindrical cell achieved a capacity of 4.7 Ah with almost no change during 1000 cycles at 2 C, suggesting excellent potential for future applications.

Air Corrosion of Layered Cathode Materials for Sodium-Ion Batteries: Cation Mixing and a Practical Suppression Strategy.

Layered oxide cathodes of sodium-ion batteries (SIBs) are considered promising candidates due to their fascinating high capacity, good cyclability, and environmental friendliness. However, the air sensitivity of layered SIB cathodes causes high electrode manufacturing costs and performance deterioration, hampering their practical application. Herein, a commercial O3-type layered Na(Ni1/3Fe1/3Mn1/3)O2 (NNFM) material is adopted to investigate the air corrosive problem and the suppression strategy. We reveal that once the layered material comes in contact with ambient air, cations migrate from transition metal (TM) layers to sodium layers at the near surface, although Na+ and TM ions show quite different ion radii. Experimental results and theoretical calculations show that more Ni/Na disorder occurs in the air-exposed O3-NNFM materials, owing to a lower Ni migration energy barrier. The cation mixing results in detrimental structural distortion, along with the formation of residual alkali species on the surface, leading to high impedance for Na+ diffusion during charge/discharge. To tackle this problem, an ultrathin and uniform hydrophobic molecular layer of perfluorodecyl trimethoxysilane is assembled on the O3-NNFM surface, which significantly suppresses unfavorable chemistry and structure degradation during air storage. The in-depth understanding of the structural degradation mechanism and suppression strategy presented in this work can facilitate high-energy cathode manufacturing from the perspective of future practical implementation and commercialization.

Organic Electrode Materials for Energy Storage and Conversion: Mechanism, Characteristics, and Applications.

ConspectusLithium ion batteries (LIBs) with inorganic intercalation compounds as electrode active materials have become an indispensable part of human life. However, the rapid increase in their annual production raises concerns about limited mineral reserves and related environmental issues. Therefore, organic electrode materials (OEMs) for rechargeable batteries have once again come into the focus of researchers because of their design flexibility, sustainability, and environmental compatibility. Compared with conventional inorganic cathode materials for Li ion batteries, OEMs possess some unique characteristics including flexible molecular structure, weak intermolecular interaction, being highly soluble in electrolytes, and moderate electrochemical potentials. These unique characteristics make OEMs suitable for applications in multivalent ion batteries, low-temperature batteries, redox flow batteries, and decoupled water electrolysis. Specifically, the flexible molecular structure and weak intermolecular interaction of OEMs make multivalent ions easily accessible to the redox sites of OEMs and facilitate the desolvation process on the redox site, thus improving the low-temperature performance, while the highly soluble nature enables OEMs as redox couples for aqueous redox flow batteries. Finally, the moderate electrochemical potential and reversible proton storage and release of OEMs make them suitable as redox mediators for water electrolysis. Over the past ten years, although various new OEMs have been developed for Li-organic batteries, Na-organic batteries, Zn-organic batteries, and other battery systems, batteries with OEMs still face many challenges, such as poor cycle stability, inferior energy density, and limited rate capability. Therefore, previous reviews of OEMs mainly focused on organic molecular design for organic batteries or strategies to improve the electrochemical performance of OEMs. A comprehensive review to explore the characteristics of OEMs and establish the correlation between these characteristics and their specific application in energy storage and conversion is still lacking.In this Account, we initially provide an overview of the sustainability and environmental friendliness of OEMs for energy storage and conversion. Subsequently, we summarize the charge storage mechanisms of the different types of OEMs. Thereafter, we explore the characteristics of OEMs in comparison with conventional inorganic intercalation compounds including their structural flexibility, high solubility in the electrolyte, and appropriate electrochemical potential in order to establish the correlations between their characteristics and potential applications. Unlike previous reviews that mainly introduce the electrochemical performance progress of different organic batteries, this Account specifically focuses on some exceptional applications of OEMs corresponding to the characteristics of organic electrode materials in energy storage and conversion, as previously published by our groups. These applications include monovalent ion batteries, multivalent ion batteries, low-temperature batteries, redox flow batteries with soluble OEMs, and decoupled water electrolysis employing organic electrodes as redox mediators. We hope that this Account will make an invaluable contribution to the development of organic electrode materials for next-generation batteries and help to unlock a world of potential energy storage applications.

Interfacial Spinel Local Interlocking Strategy Toward Structural Integrity in P3 Oxide Cathodes.

P3-layered transition oxide cathodes have garnered considerable attention owing to their high initial capacity, rapid Na+ kinetics, and less energy consumption during the synthesis process. Despite these merits, their practical application is hindered by the substantial capacity degradation resulting from unfavorable structural transformations, Mn dissolution and migration. In this study, we systematically investigated the failure mechanisms of P3 cathodes, encompassing Mn dissolution, migration, and the irreversible P3-O3' phase transition, culminating in severe structural collapse. To address these challenges, we proposed an interfacial spinel local interlocking strategy utilizing P3/spinel intergrowth oxide as a proof-of-concept material. As a result, P3/spinel intergrowth oxide cathodes demonstrated enhanced cycling performance. The effectiveness of suppressing Mn migration and maintaining local structure of interfacial spinel local interlocking strategy was validated through depth-etching X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and in situ synchrotron-based X-ray diffraction. This interfacial spinel local interlocking engineering strategy presents a promising avenue for the development of advanced cathode materials for sodium-ion batteries.