Bangong-Nujiang Suture Research Articles

Petrogenesis of Early Cretaceous andesites and mafic dikes in central Tibet: Implications for the growth of continental crust in collision zones

Post-collisional magmatic rocks in central Tibet provide an opportunity to study the processes of continental crustal growth in a collision zone. Here, we report data for samples of andesites and coeval mafic dikes obtained from the Jiaqiong area of the Bangong–Nujiang suture zone, central Tibet. Zircon U–Pb dating shows that the andesites and mafic dikes were emplaced concurrently during the late Early Cretaceous (ca. 115 Ma). The andesites have high Mg# values (55.2–61.6) and initial 87Sr/86Sr ratios (0.7086–0.7088), negative whole-rock εNd(t) (−6.5 to − 6.1) and zircon εHf(t) (−5.1 to − 1.7) values, and elevated zircon δ18O (6.8‰–7.5‰) values, indicating that the andesites were probably derived by the partial melting of an ancient subduction-modified lithospheric mantle. The coeval mafic dikes have moderately high Mg# values (49.3–50.0) and initial 87Sr/86Sr ratios (0.7076–0.7082), and negative εNd(t) values (−5.4 to − 5.3), implying that they were derived from an enriched lithospheric mantle source. However, the zircon εHf(t) (−5.8 to + 1.6) and δ18O (5.2‰–6.3‰) values of these mafic dikes indicate the influence of depleted mantle components. Furthermore, results of Sr–Nd–Hf–O isotopic mixing modeling suggest that these mafic dikes could have been produced by interaction between asthenospheric and lithospheric mantle. Therefore, we suggest that the parental magmas of the mafic dikes were probably generated by interaction between asthenospheric and overlying metasomatized lithospheric mantle. Combined with data on nearby Cretaceous magmatic rocks and sedimentary strata, we propose that the studied magmatic rocks were formed in a post-collisional slab breakoff setting in central Tibet and have made a substantial contribution to the vertical growth of continental crust in this continental collision zone.

Paleogene sediment provenance in the Gaize Basin: Implications for early Cenozoic paleogeography of central Tibet

A comprehensive study of the sediment source-to-sink history of basins arranged along the Bangong-Nujiang Suture Zone (BNSZ) is critical for understanding the early Cenozoic topography and drainage systems of central Tibet and its implications for the uplift history of the Tibetan Plateau. Nevertheless, previous provenance analyses work mainly focused on the middle-eastern segment of the BNSZ, those Paleogene basins in the western segment have received less attention, which hinders a full understanding of the early Cenozoic topography of central Tibet. In this study, based on a chronostratigraphic framework developed for the lower Cenozoic continental redbeds of the Gaize Basin, we applied detrital zircon U-Pb geochronology to the well-exposed Paleogene Suonahu Formation in order to reconstruct the basin's source-to-sink history. Integrating these new data with detrital zircon U-Pb results from the underlying Kangtuo Formation, we recognize a major secular shift in sediment provenance characterized by inputs of Lhasa-derived clasts during the Late Eocene. Moreover, we applied statistical analysis to compare the U-Pb age spectra of Eocene strata in the Gaize-Nima-Lunpola basins in order to assess similarities between them and potential source regions. Our study confirms a paleogeographic scenario in which these Paleogene basins most likely were part of a low-elevation intermontane valley.

Coexisting High-Al and High-Cr Chromitites in the Dingqing Ophiolite (SE Tibet): Inferences to Compositional Heterogeneity in the Tethyan Upper Mantle

The Dingqing ophiolite represents a significant allochthonous ophiolite nappe in the eastern segment of the Bangong–Nujiang suture zone in southeastern Tibet. The microanalytical data of associated podiform chromitites classify them into two distinct varieties: high-Al and high-Cr. The coexistence of both high-Cr and high-Al chromitites in the Dingqing ophiolite suggests a complex or multistage evolutionary history of the host rocks. New petrological and geochemical analyses are used herein to unravel the interrelationships between the chromitite ores and host rocks and assess the mechanism of formation. The Dingqing ophiolitic nappe is made up mainly of harzburgite, dunite, and less abundant pyroxenite and gabbro. Several small lens-shaped bodies of chromitite ore are mostly confined to the harzburgite rocks, with ore textures varying from massive to sparsely disseminated chromite. In addition to magnesiochromite, the orebodies contain minor amounts of olivine, amphibole, and serpentine. The textural relationships provide compelling evidence of plastic deformation and partial melting of the associated peridotites. Detailed examination of the Cr-spinel grains reveals a wide range of composition, spanning from high-Al (Cr# = 3.18–59.5) to high-Cr (Cr# 60.3–87.32). The abundances of the platinum-group element (PGE) in chromitites are significantly variable (93 to 274 ppb). Formation of the Dingqing peridotites most likely took place in a mid-ocean ridge (MOR) setting, and subsequent modifications by supra-subduction zone (SSZ) melts resulted in heterogenous or mixed geochemical characteristics of these rocks. Chemistry of the spinel–olivine–clinopyroxene assemblage demonstrates multiple stages of partial melting of the source mantle rocks, including an early phase of restricted partial melting (~20%–30%) and a later phase of extensive partial melting (>40%). The formation of the high-Al chromitite type was associated with the early phase (constrained melting), whereas extensive partial melting in the late stages likely led to the accumulation of high-Cr podiform chromitite bodies.

Mesozoic felsic magmatism along the Bangong–Nujiang suture zone, Tibet: Temporospatial variations and tectonic implications

The subduction history and closure of the Meso-Tethys Ocean have not yet been well constrained using data from felsic rocks along the Bangong–Nujiang suture zone. Here we present geochronological, geochemical, and isotopic data from Early Jurassic–Late Cretaceous felsic rocks in the Laguo Co area of central Tibet. We combine our results with published data from coeval felsic rocks to explore the temporospatial variations in magmatism and the implications for subduction in and closure of the Meso-Tethys Ocean. The studied rocks include 182–180 Ma granodiorite, 109 Ma granite porphyry, and 68 Ma rhyolite, and zircon grains from each yield different εHf(t) values (+8.9 to +14.0, −5.5 to +0.7, and −4.9 to +1.1, respectively). The rocks have low-K tholeiitic to medium-K calc-alkaline compositions, low Y and Yb contents, and positive Sr anomalies. These data suggest an oceanic source for the Early Jurassic granodiorite and a crustal source for the Cretaceous granite porphyry and rhyolite, as well as a tectonic transition from an oceanic arc during the Early Jurassic to continental collision during the Cretaceous. The temporospatial variation in felsic magmatism corresponds to intra-oceanic subduction, bidirectional subduction, oceanic ridge or flat subduction, slab rollback, slab breakoff or sinking, and lithospheric delamination. The timing of closure of the Meso-Tethys Ocean is constrained to the Jurassic–Cretaceous, as evidenced by the major differences of the magma sources and formation processes between the Jurassic and Cretaceous felsic rocks. Finally, we present a model showing that oceanic closure occurred earlier in the east and north and later in the west and south.

Early Jurassic lithospheric delamination in the Amdo microcontinent, central Tibet: Inferred from coeval OIB- and MORB-like gabbros

The Bangong–Nujiang suture zone (BNSZ) is the remnants of the Meso-Tethyan main oceanic basin in the Tibetan plateau. It is noted that several microcontinents, e.g., Amdo and Jiayuqiao, occur within the Meso-Tethyan ocean basin. These microcontinents were strongly reworked associated with the subduction and closure of this ancient ocean, thus they play a key role in understanding the evolution of this ocean. In this contribution, we report newly documented Early Jurassic gabbros (ca. 182–175 Ma) from the Amdo microcontinent in the middle segment of the BNSZ. The gabbros can be subdivided into two groups, i.e., OIB (ocean island basalt) and MORB (mid-ocean ridge basalt) groups. The OIB-group gabbros are characterized by highly enriched NdHf isotopic characteristics (zircon εHf(t) = −11.7 to −8.9; whole-rock εNd(t) = −11.0 to −10.1). They are geochemically similar to OIB and are interpreted to be products of the partial melting of a relatively deep mantle source (> 85 km) and subsequent continental crustal inputting. The MORB-group gabbros belong to the tholeiitic series and have similar compositions to those of MORB. They were most likely derived from a depleted mantle source (zircon εHf(t) = +3.7 to +16.5; whole-rock εNd(t) = +4.9 to +8.1) in a relatively shallow depth (< 85 km). Integrating previous studies with the data presented in this contribution, we suggest that the generation of coeval OIB- and MORB-like gabbros are related to lithospheric delamination after the Qiangtang-Amdo collision and the closure of the Bangong-Nujiang ocean basin. This result will give new constraint on the evolution of the Meso-Tethyan Ocean.

Divergent double subduction of Bangong-Nujiang Ocean revealed by high-resolution magnetotelluric data at 86°E in the northern Tibetan Plateau

The Tibetan Plateau was mainly produced by the assembly of several terranes resulting from ocean closure and continental collision. The formation and evolution of the Bangong-Nujiang Ocean (BNO) played a prominent role in the Tibetan Plateau accretion before the Cenozoic collision between the Indian and Eurasian continents. The closure mode of the BNO between the Lhasa and Qiangtang terranes has been controversial, involving subduction polarity, i.e., regarding whether there was only northward subduction beneath the Qiangtang terrane or both southward and northward subduction beneath the Lhasa and Qiangtang terranes. To resolve this issue, a dense broadband magnetotelluric (MT) profile transecting the Bangong-Nujiang suture zone (BNS) at 86°E was completed. After standardized data processing and analysis, geological interpretation can be performed on the two-dimensional (2-D) inversion results of the MT data. Through a large number of inversion experiments, we obtained a reliable lithospheric electrical structure beneath the BNS and its adjacent regions. Our results show that the upper crust in our study area is featured by high resistivity overall, but it is cut by several fault zones, indicating that it may be influenced by the late strike-slip fault caused by the India-Asia collision. The middle-lower crust of the northern Lhasa terrane is highly conductive and may represent juvenile crust. The existence of a northward and southward inclined electrical gradient zone in the BNS may indicate that the BNO was closed by north-south bidirectional subduction.

Tectonic evolution of the Meso-Tethys Ocean in the Jurassic: Birth, growth, and demise of a missing intra-oceanic arc

Reconstructing ophiolite ages and tectonic attributes can elucidate ancient ocean tectonic evolution. We present petrological, chronological, geochemical, and isotopic data for Ritu and Dongco ophiolites (Bangong–Nujiang suture zone, Tibetan Plateau). The ∼171 Ma Ritu and ∼169 Ma Dongco diabase are derived from high-temperature, highly depleted mantle metasomatized by subduction fluids; they are similar to fore-arc basalts. The ∼165 Ma Ritu andesites, from enriched mantle metasomatized by subduction fluids and a small proportion of subduction sediment melts, have affinity with the oceanic plateau. The ∼161 Ma Ritu dacites and Dongco granodiorites arose via interaction between subduction sediment melts and the mantle wedge, and ∼158 Ma Dongco granites were derived from subduction oceanic plate metasomatized by subduction sediment melts; they are all similar to arc magmatic rocks. Their high Na2O and low K2O and Th contents, and depleted zircon εHf(t) values, differ from those of southern Qiangtang terrane continental arc magmatic rocks, indicating intra-oceanic origin. The Middle Jurassic diabase and regional contemporaneous fore-arc basalts and boninites likely formed during intra-oceanic subduction initiation. The Middle–Late Jurassic dacites, granodiorites, granites, and regional contemporaneous high-Mg andesites likely formed in a mature intra-oceanic arc. Therefore, the Meso-Tethys Ocean may contain a ∼1000 km intra-oceanic subduction zone with Middle–Late Jurassic mature intra-oceanic arc. Subduction initiation of the intra-oceanic subduction zone likely arose via subduction transference caused by collage of the oceanic plateau and southern Qiangtang terrane at ∼182–177 Ma. At ∼171–155 Ma, the intra-oceanic arc gradually formed fore-arc basalts, boninites, high-Mg andesites, and tholeiitic/calc-alkaline arc rocks, indicating final maturity. The intra-oceanic arc west section potentially collided with the southern Qiangtang terrane ∼155–145 Ma, while the middle section potentially lasted until Early Cretaceous. Our study constrains Meso-Tethys Ocean evolution, providing an important basis for the study of intra-oceanic arcs in orogenic belts.

Sedimentary Evolution and Geological Characteristics of the Jurassic in the South Qiangtang Basin, China

Based on the analysis of lithology, lithofacies combinations, sedimentary structures, and fossil types in five geological sections measured through fieldwork, this paper comprehensively elucidates the sedimentary evolution characteristics of the Jurassic period in the South Qiangtang area. The South Qiangtang Basin is renowned for preserving the most complete Jurassic marine sedimentary strata in China, and it primarily consists of a mixed platform environment of carbonate and clastic rocks. The Jurassic strata in the South Qiangtang Basin range from the Quse Formation at the base to the Suowa Formation at the summit, with sedimentary facies evolving from the outer shelf to the subtidal zone, and seawater depth gradually becoming shallower. This trend may be associated with the division and expansion of the Bangong–Nujiang suture zone during the Late Triassic, subduction in the Middle Jurassic, and the suture and splicing of the Qiangtang–Lhasa plate during the Late Jurassic tectonic movements. In conclusion, this research presents a comprehensive analysis of the sedimentary evolution of the Jurassic period in the South Qiangtang Basin for the first time. The findings offer significant contributions to the understanding of the region’s geological history and serve as a valuable foundation for future investigations.

First identification of Early Cretaceous mafic dikes in the Baingoin area, central Tibet: Implications for crust-mantle interactions and magmatic flare-up

Mafic dikes are generally emplaced in extensional tectonic settings and provide key information regarding deep mantle processes and sources. The Bangong-Nujiang suture zone was formed by the collision of the Qiangtang and Lhasa terranes and experienced intense magmatism during the Early Cretaceous. However, the deep mantle processes and mechanisms involved in this magmatic flare-up (ca. 115 Ma) in the collisional belt remain controversial because of the lack of evidence for coeval mafic magmatism. Here, we present detailed petrological, geochronological, geochemical, and Sr-Nd-Hf-O isotope data for the newly discovered hypersthene-bearing mafic dikes in the Baingoin area in the middle-eastern parts of the Bangong-Nujiang suture zone, central Tibet. Secondary ion mass spectroscopy (SIMS) zircon U-Pb dating showed that the mafic dikes were emplaced during 120−115 Ma. These mafic rocks are characterized by variable MgO contents (2.7−5.2 wt%) and Mg# values (38.5−52.8), slight enrichment in light rare earth elements (REEs; [La/Yb]N = 7.5−8.1), relatively flat heavy REE patterns ([Gd/Yb]N = 1.75−1.84), and negative Eu, Ta, Nb, and Ti anomalies. The dikes also have relatively low initial 87Sr/86Sr ratios (0.7060−0.7062) and negative εNd(t) (−2.2 to −1.6) and positive εHf(t) (+2.5 to +3.6) values, and variable zircon εHf(t) (−2.2 to +7.2) and slightly elevated zircon δ18O (5.6‰−7.0‰) values. These geochemical characteristics indicate that the mafic dikes were derived from an enriched lithospheric mantle source. However, compared with coeval magmatic rocks, the mafic dikes have relatively high εNd(t) and εHf(t) values, indicating that they contain a depleted mantle component. The mafic dikes contain clinopyroxene and orthopyroxene (i.e., hypersthene), indicative of derivation from a high-temperature magma source. Clinopyroxene-melt thermobarometry yielded a temperature range of 1167−1213 °C, further supporting the involvement of a high-temperature asthenospheric component. Therefore, we suggest that the parental magmas of the Nakoulai mafic dikes were probably generated by the interaction between the asthenospheric mantle and overlying metasomatized lithospheric mantle. Combined with data from nearby Cretaceous magmatic rocks and sedimentary rocks, we suggest that the mafic dikes were generated in a postcollisional setting caused by upwelling of asthenospheric mantle owing to slab breakoff beneath the Bangong-Nujiang suture zone. Slab breakoff played a key role in the crust-mantle interactions and the onset of the magmatic flare-up in the middle-eastern parts of the Bangong-Nujiang suture zone.

Southern Tibetan rifting since late Miocene enabled by basal shear of the underthrusting Indian lithosphere

Syncontractional extension is prominent in present-day Tibet, but its origin remains vigorously debated. Several deep-seated geodynamic processes (e.g., Indian underthrusting, horizontal flow, and mantle upwelling) have been linked to Tibetan rifting. Indian underthrusting is a good candidate because it can well explain why surface rifts are more prominent south of the Bangong–Nujiang suture; however, how Indian underthrusting causes extension is not well understood and lacks observational constraints. Seismic anisotropy, measured by exploiting the birefringence effect of shear waves, can be indicative of the deformation styles within the crust. Here, we unveil the dominant convergence-parallel alignment of anisotropic fabrics in the deep crust of the southern Tibetan rifts using seismic recordings collected from our recently deployed and existing seismic stations. This finding suggests that the strong north-directed shearing exerted by the underthrusting Indian plate is key to enabling present-day extension in southern Tibet.

Petrogenesis of Early Cretaceous volcanic rocks from the Rena-Co area in the southern Qiangtang Terrane, central Tibet: evidence from zircon U-Pb geochronology, petrochemistry and Sr-Nd-Pb–Hf isotope characteristics

AbstractThe subduction of the Bangong–Nujiang Ocean is important in the geological evolution of the Tibetan Plateau. In this paper, we report new zircon U-Pb age and Lu-Hf isotopic data and whole-rock elemental and Sr-Nd-Pb isotopic data for Early Cretaceous dacites from the Rena-Co area (RCA) in the southern Qiangtang Terrane (QT), central Tibet and use these data to better understand the tectonic evolution of the Bangong–Nujiang suture. LA–ICP-MS dating of zircons yields ages of 109.5 ± 0.6 Ma to 109.6 ± 0.8 Ma for the dacites from the RCA. Geochemically, these dacites are medium-K calc-alkaline and show high SiO2 contents of 64.79–70.37 wt.%, high Sr contents of 517–598 ppm and low Y contents of 8.45–10.7 ppm, similar to those of typical adakites. Additionally, all the rocks are strongly enriched in light rare earth elements and some large ion lithophile elements (e.g. Rb, U, K and Cs) but significantly depleted in high-field-strength elements (e.g. Nb, Ta and Ti), consistent with the geochemical characteristics of arc-type magmas formed in the subduction zone. Moreover, these adakite-like dacites show whole-rock initial (87Sr/86Sr)i ratios of 0.705119 to 0.705491, (206Pb/204Pb)i ratios of 18.489 to 18.508, (207Pb/204Pb)i ratios of 15.591 to 15.612, (208Pb/204Pb)i ratios of 38.599 to 38.686, ϵNd(t) values of −0.28 to +1.25 and single-stage Nd model ages of 642 to 818 Ma, as well as significantly positive zircon ϵHf(t) values of 3.9–13.1, with young Hf-depleted mantle ages of 331 to 923 Ma. These geochemical and isotopic data indicate that they are most likely derived from the juvenile thickened mafic lower continental crust, which contains partial melts of metasomatized peridotite and subduction-related fluids in the magma source region. Based on previous studies and our new data, we propose that the RCA adakite-like dacites are most likely a result of the northwards subduction of the Bangong–Nujiang Ocean lithosphere beneath the southern QT during the Early Cretaceous and that a slab rollback model could explain the formation of the RCA adakite-like dacites.

Microplate boundaries and patterns in the southern Tibetan Plateau revealed by gravity and magnetic data

The Tibetan Plateau is located in the eastern part of the Tethys-Himalayan megatectonic domain and consists of a series of microplates that successively accreted to the southern edge of the Eurasian Continent. These microplates have undergone complex evolutionary processes during rifting, drift and collision. The gravity and magnetic anomalies show that the anomaly characteristics on the Tibetan Plateau is significantly different in the north-south direction, from the Qaidam Microplate to the Lhasa Microplate. In this paper, we apply an improved Logistic Filter method, combined with the upward continuation of gravity anomalies, to identify multi-scale tectonic boundaries in the Tibetan Plateau region. The results show that the edge detection results correspond well in space with fracture zones and suture/ophiolite zones. Also, there are clear discontinuities along both sides of the middle and western sections of the Bangong-Nujiang Suture Zone and the eastern section of the Jinshajiang-Ailaoshan Suture Zone. We refined the boundaries of five microplates, including the South and North Qiangtang and the South, Central and North Lhasa, in the southern Tibetan Plateau. Then, we analyzed the evolutionary processes of these microplates and the transformation of the types to which the microplates belonged during different historical periods by combining relevant evidences from other geological records and plate reconstruction. These microplates are strongly related to the evolutionary history of the Tethys Ocean. The closure of the Neo-Tethys Ocean triggered a large-scale orogeny between the Indo-Asian continents, and these microplates were eventually accreted in the orogenic belt. We analyze the formation patterns and boundary types of microplates in the evolutionary process and then divide into three stages, i.e., rifting-derived, accretion-derived, and subduction-derived stages. The transformation patterns of microplate types at different stages provide a new perspective for the study of the evolution of mega-orogenic belts.

Zircon U–Pb Geochronology, Geochemistry and Geological Significance of the Santaishan–Yingjiang Ultramafic Rocks in Western Yunnan, China

The study of ultramafic rocks in Western Yunnan is of great significance for an understanding of the tectonic evolution of the Neo-Tethys Ocean. The zircon U–Pb data indicated that the Santaishan serpentinized pyroxene peridotite (SSPP) was formed 186–190 Ma, and the Yingjiang hornblende pyroxenite (YHP) was formed 182–183 Ma. The content of MgO in the SSPP is relatively high, but the SiO2, Al2O3, CaO and TiO2 content and ΣREE are low, while the YHP has opposite characteristics. The samples from the SSPP and YHP have similar distribution patterns of trace elements, both being enriched in large ion lithophile elements (LILEs) such as Rb, Ba and Th and depleted in high field strength elements (HFSEs) such as Ti, P and Nb. These characteristics are consistent with the supra-subduction zone (SSZ) type and mid-ocean ridge basalt (MORB) type of ophiolite in the Bangong–Nujiang suture zone. The SSPP rocks have relatively high (87Sr/86Sr)i ratios (0.7091–0.7131) and positive Hf(t) values (11.2–13.8), with εNd(t) values varying from −1.1 to 9.4. The YHP has relatively low εHf(t) values (3.5 to 6.9), with the Nd–Hf isotopic model ages ranging from 610 to 942 Ma. The signatures of Sr–Nd and Lu–Hf isotopes indicate that the SSPP and YHP were derived from the depleted mantle, and the crustal material in the magma source may have originated from the Neoproterozoic Rodinia supercontinent. In the early Middle Jurassic (190 Ma), the Tengchong Block was in the setting of an active continental margin induced by the subduction of the Bangong–Nujiang Ocean, where the SSZ-type SSPP with ophiolite characteristics was formed. With the continuous subduction of the Bangong–Nujiang Ocean, the slab retreated and induced mantle convection, which resulted in the gradual thinning of the continental crust. Meanwhile, the Yingjiang back-arc basin was formed 183 Ma. Under the influence of the upwelling of the asthenosphere and the mixture of crustal materials, the MORB-type YHP was formed.

Constraining the deep dynamic process beneath the Bangong-Nujiang suture zone: A case study from the early cretaceous trachytic rocks

ABSTRACT The geodynamic processes that occurred beneath the Bangong – Nujiang suture zone during the evolution of the Indus – Yarlung Neo-Tethys and Bangong – Nujiang Meso-Tethys are unclear. We conducted a study of Early Cretaceous andesitic rocks from the Nyima area, north – central Tibet, to investigate these processes. The studied rocks have zircon U – Pb ages of 110–104 Ma and negative to positive εHf(t) values (−12.1 to+10.3). These rocks have affinities with trachytes, and have high total alkali contents and Na2O/K2O ratios (5–125). They also have high Sr (281–1409 ppm), Y (21.0–28.5 ppm), and Yb (2.00–2.65 ppm) contents, and exhibit depletions in Nb, Ta, and Ti. Such features indicate these rocks are not adakites, but are similar to typical arc rocks. The geochemical and isotopic data suggest the studied rocks were formed by partial melting of amphibolite-facies oceanic lithosphere, with the addition of enriched sedimentary materials. Based on the regional crustal evolution, we suggest that the Nyima andesitic rocks formed by melting of Bangong – Nujiang oceanic lithosphere. As such, the Early Cretaceous igneous rocks along the central Bangong – Nujiang suture zone were not associated with northward subduction in the Indus – Yarlung Neo-Tethys.

Lower Cretaceous deep marine deposits in western Tibet: Implications for paleoceanographic evolution of the Mesotethyan Ocean

Cretaceous pelagic deposits in the Bangong-Nujiang Suture Zone are significant for understanding the last evolutionary stage of the Mesotethyan Ocean and constraining the timing of initial Lhasa-Qiangtang collision, however few existing studies present the necessary sedimentological and biostratigraphic data. Here, we present detailed lithostratigraphic and biostratigraphic surveys in the Rotug area. A total of 40 species belonging to 23 genera are identified in the pelagic siliceous sedimentary sequences and indicate an Early Cretaceous (Hauterivian–late Aptian) age based by correlation on Unitary Association Zones. These newly discovered radiolarians help to constrain the paleoceanography and paleogeography of the Mesotethyan Ocean and indicate a deep marine setting existed across western Tibet during the late Aptian. Faunal similarities across the entire Tethyan realm, suggest this ocean was connected with the Neotethyan Ocean during the Early Cretaceous. This study has implications for the paleoceanographic evolution of the post-collisional residual-sea and sedimentary characteristics of marginal basins adjacent to continents during the Late Mesozoic.

Early cretaceous bimodal volcanic rocks in Wuga Co area, central tibet: The first identification of direct products derived from slab sinking in the Bangong-Nujiang suture zone

Introduction: The Bangong-Nujiang Suture Zone (BNSZ) in central Tibet is a remnant of the Bangong-Nujiang Ocean that records its entire Wilson Cycle. The model of divergent double-sided subduction (DDS) is crucial for elucidating the evolution of tectonomagmatic activity on both sides of the BNSZ and for understanding why no high-pressure metamorphic rocks occur in the BNSZ. However, the DDS geodynamics remain poorly constrained. In particular, there is a lack of reports on magmatic rocks directly associated with slab sinking in the DDS terminal stage.Methods: This study presents new geochronological, geochemical, and isotopic data for the Early Cretaceous bimodal volcanic rocks around the Wuga Co area.Results: The bimodal volcanic rocks are divided into the Wuga Co rhyolites (SiO2 = 77.0–79.0 wt%) and the Wuga Co basaltic andesites (SiO2 = 53.9–55.5 wt%). The isotopic values of the Wuga Co basaltic andesites with low (87Sr/86Sr)i values (+0.7040 to +0.7044) and high εNd(t) values (+3.8 to +4.1) lie among three endmembers (the BNO sediments in accretionary wedge, depleted mantle and the BNO slab).Discussion: These values indicate the partial melting of a mantle peridotite that interacted with the subducted slab and sediment in the accretionary wedge, which was caused by the sinking of the Bangong-Nujiang oceanic slab. The Wuga Co rhyolites (108 Ma) have low (87Sr/86Sr)i values (+0.703 to +0.706), high εNd(t) values (+2.25 to +2.49), and high εHf(t) values (+5.6 to +10.0). These values indicate that the rhyolite formed by partial melting of juvenile basaltic crust. This study also collected Hf isotope data from both sides of the BNSZ to constrain its evolution. Our results show that the εHf(t) values of magma on both sides of the BNSZ were elevated simultaneously at 130 Ma, which may be caused by the Bangong-Nujiang oceanic slab rupture. Based on these new data, we propose that the Bangong-Nujiang oceanic slab ruptured from the two overlying terranes at approximately 130 Ma and subsequently sank into the mantle at approximately 108 Ma.

Magmatic records of subduction and closure of the Meso-Tethys Ocean in the northern-central Tibetan Plateau

The evolution of the Tethys Ocean has received much research attention; however, the timing and subduction mechanisms involved in the closure of the Bangong-Nujiang Meso-Tethys Ocean remain poorly constrained. In this study, we present geological, geochronological, geochemical, and zircon isotopic data from Cretaceous magmatic rocks and combine these with previously published data within the central Bangong-Nujiang suture zone in the north-central Tibetan Plateau. The integrated data update the regional tectonic framework and enable a comprehensive geodynamic model to be developed for the subduction and ocean closure events. In detail, temporal and spatial variations in the Jurassic−Cretaceous magmatism reflect the influence of the northward subduction of the Dongqiao-Amdo oceanic basin and the bidirectional subduction of the Bangong-Nujiang Meso-Tethys oceanic crust. The evolution of the Bangong-Nujiang Meso-Tethys Ocean further involved initial intra-ocean subduction, slab rollback, and flat subduction, as evidenced by two phases of north-south migration of magmatism at ca. 190−160 and 160−130 Ma and a magmatic hiatus at 160−140 Ma. The ocean closed during a two-stage process, including the closure of the Dongqiao-Amdo oceanic basin to the north and the Bangong-Nujiang Meso-Tethys Ocean to the south. The Dongqiao-Amdo oceanic basin closed soon after ca. 180 Ma, accompanied by continent-continent collision between the Amdo microcontinent and the South Qiangtang terrane. The Bangong-Nujiang Meso-Tethys Ocean closed at 130−120 Ma, corresponding to a period of waning magmatism. This closure represented complete oceanic closure and caused an arc-continent collisional event involving the Baingoin magmatic arc, the Amdo microcontinent, and the Lhasa terrane. The Lower Cretaceous terrestrial strata and their basal unconformity mark the final closure of the ocean, and the Early Cretaceous ocean islands might have formed before ca. 130 Ma.

Detrital zircon U–Pb age constraints on the Meso-Tethys Ocean closure in SE Asia

Abstract The location of the Meso-Tethyan suture in SE Asia is ambiguous due to the strong overprint by the later India–Asia collisional tectonics. For the SE Asian extension of the Meso-Tethyan Bangong–Nujiang Suture (BNS) in Tibet, the two main candidates are the Longling–Ruili Suture (between the Tengchong and Baoshan blocks) and the Myitkyina ophiolite belt. Here, we present new detrital zircon U–Pb ages from high-grade metasedimentary rocks of the Gaoligong Group, which is considered to be the basement of the Tengchong Block located between the Longling–Ruili Suture and Myitkyina ophiolite belt. Our data suggest that the Gaoligong Group contains Cambrian, Triassic and Cretaceous zircons and is not a Precambrian basement, with a diagnostic age population peak at c. 1110 Ma. This peak is comparable to the c. 1170 Ma peak reported in the Australia-derived blocks (e.g. Lhasa and West Australia). Such similarities, as well as the similarities in the stratigraphy, palaeobiogeography and magmatic history of the Tengchong Block, suggest that the Tengchong Block was located adjacent to the northern Australia margin in Gondwana, and was most likely to have been linked with the Lhasa Block (southern Tibet) since the Early Paleozoic. Thus, the Longling–Ruili Suture is likely to represent a continuation of the Meso-Tethyan BNS in SE Asia.

Lithospheric electrical structure across the Bangong-Nujiang Suture in northern tibet revealed by magnetotelluric

Competing hypotheses have been proposed to explain the subduction polarity of the Bangong-Nujiang Tethyan Ocean and the formation of the high-conductivity anomaly beneath the Qiangtang terrane. However, the lithospheric architecture of the northern Tibetan Plateau is still poorly understood due to inhospitable environments and topography. Therefore, in the winter of 2021, a 440 km long, SN-trending broadband magnetotelluric (MT) profile was recorded in northern Tibet to detect its regional lithospheric structure. The nonlinear conjugate gradients algorithm is conducted to invert the individual TM mode data. A reliable 2D electrical model was obtained by ablation processing and analysis of broadband magnetotelluric data to test the lithospheric electrical structure and dynamics between the northern Lhasa and Qiangtang terranes. The inversion results reveal the lithospheric structure at a depth of 100 km in northern Tibet, which synthesizes geological, geochemical and deep seismic reflection evidence and firmly identifies that the trace of the south-dipping conductor mainly resulted from the southward subduction of the Bangong-Nujiang Tethyan Ocean under the Lhasa terrane and the trace of the north-dipping conductor likely due to the northward subduction of the Bangong-Nujiang Tethyan Ocean under the Qiangtang terrane. In addition, the magnetotelluric profile also images a high-conductivity lithospheric-scale anticline beneath the central Qiangtang terrane, which may correspond to the upwelling of postcollisional magmatism triggered by northward subduction of the Bangong-Nujiang Tethyan Ocean under the Qiangtang terrane, aqueous fluid and/or partial melting.

Post-collisional magmatism associated with the final closure of the Rushan-Pshart Meso-Tethys Ocean in Pamir, Tajikistan: Inference from Cretaceous igneous rocks of the Pshart accretionary complex

The Pamir orogen was formed by the subducted accretion and amalgamation of Cimmerian terranes from the northern margin of Gondwana with the southern margin of Eurasia. The Mesozoic magmatic rocks are widespread in Pamir and record the tectonic evolution in different stages. The Rushan–Pshart suture zone represents an ancient ocean between Central and Southern Pamir. This paper reports the petrography, geochronology, and geochemistry of Cretaceous granites and diabase dikes that intrude into the Pshart complex. The granites were emplaced between 124 and 118 Ma, based on their zircon U-Pb ages. These granites are characterized by high-K calc-alkaline, low magnesian, and high SiO2, A/CNK, and K2O+Na2O values. They also display strong depletion of Ba, Sr, Eu, and Ti and comparatively weak negative Nb anomalies in spidergrams. Thus, we proposed in this study that these are highly fractionated, strongly peraluminous S-type granites. They were generated by the partial melting of the metasedimentary rocks in the plagioclase stability field and underwent subsequent fractional crystallization during their ascent. The diabase dikes contain low SiO2, and high MgO levels and negative Nb and Ta anomalies, which were interpreted to form in an extensional environment. Late Jurassic–Early Cretaceous closure of the Rushan–Pshart Ocean and subsequent foundering of its oceanic lithosphere caused local extension and upwelling of the asthenospheric mantle. The underplating of mafic magma provided a heat source to melt the metasedimentary-derived granitic that formed in the initial post-collisional environment. The subsequent local extension caused the emplacement of diabase dikes. Based on our new data and combined with data from previous studies, we concluded that the Rushan–Pshart suture zone is the remnant of the Meso-Tethys Ocean and may represent the western continuation of the Bangong–Nujiang suture of the Tibetan Plateau.