Bangong-Nujiang Suture Zone Research Articles

Tectonic evolution of the Meso-Tethys Ocean in the Jurassic: Birth, growth, and demise of a missing intra-oceanic arc

Reconstructing ophiolite ages and tectonic attributes can elucidate ancient ocean tectonic evolution. We present petrological, chronological, geochemical, and isotopic data for Ritu and Dongco ophiolites (Bangong–Nujiang suture zone, Tibetan Plateau). The ∼171 Ma Ritu and ∼169 Ma Dongco diabase are derived from high-temperature, highly depleted mantle metasomatized by subduction fluids; they are similar to fore-arc basalts. The ∼165 Ma Ritu andesites, from enriched mantle metasomatized by subduction fluids and a small proportion of subduction sediment melts, have affinity with the oceanic plateau. The ∼161 Ma Ritu dacites and Dongco granodiorites arose via interaction between subduction sediment melts and the mantle wedge, and ∼158 Ma Dongco granites were derived from subduction oceanic plate metasomatized by subduction sediment melts; they are all similar to arc magmatic rocks. Their high Na2O and low K2O and Th contents, and depleted zircon εHf(t) values, differ from those of southern Qiangtang terrane continental arc magmatic rocks, indicating intra-oceanic origin. The Middle Jurassic diabase and regional contemporaneous fore-arc basalts and boninites likely formed during intra-oceanic subduction initiation. The Middle–Late Jurassic dacites, granodiorites, granites, and regional contemporaneous high-Mg andesites likely formed in a mature intra-oceanic arc. Therefore, the Meso-Tethys Ocean may contain a ∼1000 km intra-oceanic subduction zone with Middle–Late Jurassic mature intra-oceanic arc. Subduction initiation of the intra-oceanic subduction zone likely arose via subduction transference caused by collage of the oceanic plateau and southern Qiangtang terrane at ∼182–177 Ma. At ∼171–155 Ma, the intra-oceanic arc gradually formed fore-arc basalts, boninites, high-Mg andesites, and tholeiitic/calc-alkaline arc rocks, indicating final maturity. The intra-oceanic arc west section potentially collided with the southern Qiangtang terrane ∼155–145 Ma, while the middle section potentially lasted until Early Cretaceous. Our study constrains Meso-Tethys Ocean evolution, providing an important basis for the study of intra-oceanic arcs in orogenic belts.

Sedimentary Evolution and Geological Characteristics of the Jurassic in the South Qiangtang Basin, China

Based on the analysis of lithology, lithofacies combinations, sedimentary structures, and fossil types in five geological sections measured through fieldwork, this paper comprehensively elucidates the sedimentary evolution characteristics of the Jurassic period in the South Qiangtang area. The South Qiangtang Basin is renowned for preserving the most complete Jurassic marine sedimentary strata in China, and it primarily consists of a mixed platform environment of carbonate and clastic rocks. The Jurassic strata in the South Qiangtang Basin range from the Quse Formation at the base to the Suowa Formation at the summit, with sedimentary facies evolving from the outer shelf to the subtidal zone, and seawater depth gradually becoming shallower. This trend may be associated with the division and expansion of the Bangong–Nujiang suture zone during the Late Triassic, subduction in the Middle Jurassic, and the suture and splicing of the Qiangtang–Lhasa plate during the Late Jurassic tectonic movements. In conclusion, this research presents a comprehensive analysis of the sedimentary evolution of the Jurassic period in the South Qiangtang Basin for the first time. The findings offer significant contributions to the understanding of the region’s geological history and serve as a valuable foundation for future investigations.

First identification of Early Cretaceous mafic dikes in the Baingoin area, central Tibet: Implications for crust-mantle interactions and magmatic flare-up

Mafic dikes are generally emplaced in extensional tectonic settings and provide key information regarding deep mantle processes and sources. The Bangong-Nujiang suture zone was formed by the collision of the Qiangtang and Lhasa terranes and experienced intense magmatism during the Early Cretaceous. However, the deep mantle processes and mechanisms involved in this magmatic flare-up (ca. 115 Ma) in the collisional belt remain controversial because of the lack of evidence for coeval mafic magmatism. Here, we present detailed petrological, geochronological, geochemical, and Sr-Nd-Hf-O isotope data for the newly discovered hypersthene-bearing mafic dikes in the Baingoin area in the middle-eastern parts of the Bangong-Nujiang suture zone, central Tibet. Secondary ion mass spectroscopy (SIMS) zircon U-Pb dating showed that the mafic dikes were emplaced during 120−115 Ma. These mafic rocks are characterized by variable MgO contents (2.7−5.2 wt%) and Mg# values (38.5−52.8), slight enrichment in light rare earth elements (REEs; [La/Yb]N = 7.5−8.1), relatively flat heavy REE patterns ([Gd/Yb]N = 1.75−1.84), and negative Eu, Ta, Nb, and Ti anomalies. The dikes also have relatively low initial 87Sr/86Sr ratios (0.7060−0.7062) and negative εNd(t) (−2.2 to −1.6) and positive εHf(t) (+2.5 to +3.6) values, and variable zircon εHf(t) (−2.2 to +7.2) and slightly elevated zircon δ18O (5.6‰−7.0‰) values. These geochemical characteristics indicate that the mafic dikes were derived from an enriched lithospheric mantle source. However, compared with coeval magmatic rocks, the mafic dikes have relatively high εNd(t) and εHf(t) values, indicating that they contain a depleted mantle component. The mafic dikes contain clinopyroxene and orthopyroxene (i.e., hypersthene), indicative of derivation from a high-temperature magma source. Clinopyroxene-melt thermobarometry yielded a temperature range of 1167−1213 °C, further supporting the involvement of a high-temperature asthenospheric component. Therefore, we suggest that the parental magmas of the Nakoulai mafic dikes were probably generated by the interaction between the asthenospheric mantle and overlying metasomatized lithospheric mantle. Combined with data from nearby Cretaceous magmatic rocks and sedimentary rocks, we suggest that the mafic dikes were generated in a postcollisional setting caused by upwelling of asthenospheric mantle owing to slab breakoff beneath the Bangong-Nujiang suture zone. Slab breakoff played a key role in the crust-mantle interactions and the onset of the magmatic flare-up in the middle-eastern parts of the Bangong-Nujiang suture zone.

Microplate boundaries and patterns in the southern Tibetan Plateau revealed by gravity and magnetic data

The Tibetan Plateau is located in the eastern part of the Tethys-Himalayan megatectonic domain and consists of a series of microplates that successively accreted to the southern edge of the Eurasian Continent. These microplates have undergone complex evolutionary processes during rifting, drift and collision. The gravity and magnetic anomalies show that the anomaly characteristics on the Tibetan Plateau is significantly different in the north-south direction, from the Qaidam Microplate to the Lhasa Microplate. In this paper, we apply an improved Logistic Filter method, combined with the upward continuation of gravity anomalies, to identify multi-scale tectonic boundaries in the Tibetan Plateau region. The results show that the edge detection results correspond well in space with fracture zones and suture/ophiolite zones. Also, there are clear discontinuities along both sides of the middle and western sections of the Bangong-Nujiang Suture Zone and the eastern section of the Jinshajiang-Ailaoshan Suture Zone. We refined the boundaries of five microplates, including the South and North Qiangtang and the South, Central and North Lhasa, in the southern Tibetan Plateau. Then, we analyzed the evolutionary processes of these microplates and the transformation of the types to which the microplates belonged during different historical periods by combining relevant evidences from other geological records and plate reconstruction. These microplates are strongly related to the evolutionary history of the Tethys Ocean. The closure of the Neo-Tethys Ocean triggered a large-scale orogeny between the Indo-Asian continents, and these microplates were eventually accreted in the orogenic belt. We analyze the formation patterns and boundary types of microplates in the evolutionary process and then divide into three stages, i.e., rifting-derived, accretion-derived, and subduction-derived stages. The transformation patterns of microplate types at different stages provide a new perspective for the study of the evolution of mega-orogenic belts.

Zircon U–Pb Geochronology, Geochemistry and Geological Significance of the Santaishan–Yingjiang Ultramafic Rocks in Western Yunnan, China

The study of ultramafic rocks in Western Yunnan is of great significance for an understanding of the tectonic evolution of the Neo-Tethys Ocean. The zircon U–Pb data indicated that the Santaishan serpentinized pyroxene peridotite (SSPP) was formed 186–190 Ma, and the Yingjiang hornblende pyroxenite (YHP) was formed 182–183 Ma. The content of MgO in the SSPP is relatively high, but the SiO2, Al2O3, CaO and TiO2 content and ΣREE are low, while the YHP has opposite characteristics. The samples from the SSPP and YHP have similar distribution patterns of trace elements, both being enriched in large ion lithophile elements (LILEs) such as Rb, Ba and Th and depleted in high field strength elements (HFSEs) such as Ti, P and Nb. These characteristics are consistent with the supra-subduction zone (SSZ) type and mid-ocean ridge basalt (MORB) type of ophiolite in the Bangong–Nujiang suture zone. The SSPP rocks have relatively high (87Sr/86Sr)i ratios (0.7091–0.7131) and positive Hf(t) values (11.2–13.8), with εNd(t) values varying from −1.1 to 9.4. The YHP has relatively low εHf(t) values (3.5 to 6.9), with the Nd–Hf isotopic model ages ranging from 610 to 942 Ma. The signatures of Sr–Nd and Lu–Hf isotopes indicate that the SSPP and YHP were derived from the depleted mantle, and the crustal material in the magma source may have originated from the Neoproterozoic Rodinia supercontinent. In the early Middle Jurassic (190 Ma), the Tengchong Block was in the setting of an active continental margin induced by the subduction of the Bangong–Nujiang Ocean, where the SSZ-type SSPP with ophiolite characteristics was formed. With the continuous subduction of the Bangong–Nujiang Ocean, the slab retreated and induced mantle convection, which resulted in the gradual thinning of the continental crust. Meanwhile, the Yingjiang back-arc basin was formed 183 Ma. Under the influence of the upwelling of the asthenosphere and the mixture of crustal materials, the MORB-type YHP was formed.

Constraining the deep dynamic process beneath the Bangong-Nujiang suture zone: A case study from the early cretaceous trachytic rocks

ABSTRACT The geodynamic processes that occurred beneath the Bangong – Nujiang suture zone during the evolution of the Indus – Yarlung Neo-Tethys and Bangong – Nujiang Meso-Tethys are unclear. We conducted a study of Early Cretaceous andesitic rocks from the Nyima area, north – central Tibet, to investigate these processes. The studied rocks have zircon U – Pb ages of 110–104 Ma and negative to positive εHf(t) values (−12.1 to+10.3). These rocks have affinities with trachytes, and have high total alkali contents and Na2O/K2O ratios (5–125). They also have high Sr (281–1409 ppm), Y (21.0–28.5 ppm), and Yb (2.00–2.65 ppm) contents, and exhibit depletions in Nb, Ta, and Ti. Such features indicate these rocks are not adakites, but are similar to typical arc rocks. The geochemical and isotopic data suggest the studied rocks were formed by partial melting of amphibolite-facies oceanic lithosphere, with the addition of enriched sedimentary materials. Based on the regional crustal evolution, we suggest that the Nyima andesitic rocks formed by melting of Bangong – Nujiang oceanic lithosphere. As such, the Early Cretaceous igneous rocks along the central Bangong – Nujiang suture zone were not associated with northward subduction in the Indus – Yarlung Neo-Tethys.

Lower Cretaceous deep marine deposits in western Tibet: Implications for paleoceanographic evolution of the Mesotethyan Ocean

Cretaceous pelagic deposits in the Bangong-Nujiang Suture Zone are significant for understanding the last evolutionary stage of the Mesotethyan Ocean and constraining the timing of initial Lhasa-Qiangtang collision, however few existing studies present the necessary sedimentological and biostratigraphic data. Here, we present detailed lithostratigraphic and biostratigraphic surveys in the Rotug area. A total of 40 species belonging to 23 genera are identified in the pelagic siliceous sedimentary sequences and indicate an Early Cretaceous (Hauterivian–late Aptian) age based by correlation on Unitary Association Zones. These newly discovered radiolarians help to constrain the paleoceanography and paleogeography of the Mesotethyan Ocean and indicate a deep marine setting existed across western Tibet during the late Aptian. Faunal similarities across the entire Tethyan realm, suggest this ocean was connected with the Neotethyan Ocean during the Early Cretaceous. This study has implications for the paleoceanographic evolution of the post-collisional residual-sea and sedimentary characteristics of marginal basins adjacent to continents during the Late Mesozoic.

Early cretaceous bimodal volcanic rocks in Wuga Co area, central tibet: The first identification of direct products derived from slab sinking in the Bangong-Nujiang suture zone

Introduction: The Bangong-Nujiang Suture Zone (BNSZ) in central Tibet is a remnant of the Bangong-Nujiang Ocean that records its entire Wilson Cycle. The model of divergent double-sided subduction (DDS) is crucial for elucidating the evolution of tectonomagmatic activity on both sides of the BNSZ and for understanding why no high-pressure metamorphic rocks occur in the BNSZ. However, the DDS geodynamics remain poorly constrained. In particular, there is a lack of reports on magmatic rocks directly associated with slab sinking in the DDS terminal stage.Methods: This study presents new geochronological, geochemical, and isotopic data for the Early Cretaceous bimodal volcanic rocks around the Wuga Co area.Results: The bimodal volcanic rocks are divided into the Wuga Co rhyolites (SiO2 = 77.0–79.0 wt%) and the Wuga Co basaltic andesites (SiO2 = 53.9–55.5 wt%). The isotopic values of the Wuga Co basaltic andesites with low (87Sr/86Sr)i values (+0.7040 to +0.7044) and high εNd(t) values (+3.8 to +4.1) lie among three endmembers (the BNO sediments in accretionary wedge, depleted mantle and the BNO slab).Discussion: These values indicate the partial melting of a mantle peridotite that interacted with the subducted slab and sediment in the accretionary wedge, which was caused by the sinking of the Bangong-Nujiang oceanic slab. The Wuga Co rhyolites (108 Ma) have low (87Sr/86Sr)i values (+0.703 to +0.706), high εNd(t) values (+2.25 to +2.49), and high εHf(t) values (+5.6 to +10.0). These values indicate that the rhyolite formed by partial melting of juvenile basaltic crust. This study also collected Hf isotope data from both sides of the BNSZ to constrain its evolution. Our results show that the εHf(t) values of magma on both sides of the BNSZ were elevated simultaneously at 130 Ma, which may be caused by the Bangong-Nujiang oceanic slab rupture. Based on these new data, we propose that the Bangong-Nujiang oceanic slab ruptured from the two overlying terranes at approximately 130 Ma and subsequently sank into the mantle at approximately 108 Ma.

Magmatic records of subduction and closure of the Meso-Tethys Ocean in the northern-central Tibetan Plateau

The evolution of the Tethys Ocean has received much research attention; however, the timing and subduction mechanisms involved in the closure of the Bangong-Nujiang Meso-Tethys Ocean remain poorly constrained. In this study, we present geological, geochronological, geochemical, and zircon isotopic data from Cretaceous magmatic rocks and combine these with previously published data within the central Bangong-Nujiang suture zone in the north-central Tibetan Plateau. The integrated data update the regional tectonic framework and enable a comprehensive geodynamic model to be developed for the subduction and ocean closure events. In detail, temporal and spatial variations in the Jurassic−Cretaceous magmatism reflect the influence of the northward subduction of the Dongqiao-Amdo oceanic basin and the bidirectional subduction of the Bangong-Nujiang Meso-Tethys oceanic crust. The evolution of the Bangong-Nujiang Meso-Tethys Ocean further involved initial intra-ocean subduction, slab rollback, and flat subduction, as evidenced by two phases of north-south migration of magmatism at ca. 190−160 and 160−130 Ma and a magmatic hiatus at 160−140 Ma. The ocean closed during a two-stage process, including the closure of the Dongqiao-Amdo oceanic basin to the north and the Bangong-Nujiang Meso-Tethys Ocean to the south. The Dongqiao-Amdo oceanic basin closed soon after ca. 180 Ma, accompanied by continent-continent collision between the Amdo microcontinent and the South Qiangtang terrane. The Bangong-Nujiang Meso-Tethys Ocean closed at 130−120 Ma, corresponding to a period of waning magmatism. This closure represented complete oceanic closure and caused an arc-continent collisional event involving the Baingoin magmatic arc, the Amdo microcontinent, and the Lhasa terrane. The Lower Cretaceous terrestrial strata and their basal unconformity mark the final closure of the ocean, and the Early Cretaceous ocean islands might have formed before ca. 130 Ma.

Growth of the continental crust induced by slab rollback in subduction zones: Evidence from Middle Jurassic arc andesites in central Tibet

Andesitic rocks have similar compositions to average continental crust and have played a central role in improving our understanding of the formation and evolution of the continental crust. Here we present data for andesites from the Jiaqiong area of the Bangong–Nujiang suture zone (BNSZ), Central Tibet. LA–ICP–MS zircon U–Pb ages demonstrate that these andesites were generated during the Middle Jurassic (169–164 Ma). The Jiaqiong andesites have variable Mg# (molar 100 × Mg/[Mg + Fe] = 35–63) values, and Cr (3.02–175 ppm) and Ni (5.70–47.7 ppm) contents. These andesitic rocks are enriched in light rare earth elements (REEs) ([La/Yb]N = 5.2–14.6) and yield relatively flat heavy REE patterns ([Gd/Yb]N = 1.4–2.1) with negative Ta, Nb, and Ti anomalies. They also have moderately high initial 87Sr/86Sr (0.7077–0.7092) ratios and variable negative εNd(t) (−11.0 to − 3.3) and zircon εHf(t) (−13.7 to + 2.1) values. These geochemical characteristics suggest that the Jiaqiong andesites were most probably produced by partial melting of mélange rocks. Combining our data with the regional geology, particularly that of nearby ophiolites and Jurassic andesitic rocks, we conclude that the formation of these andesites was triggered by asthenospheric upwelling and hot corner flow caused by the rollback of the northward-subducting Bangong–Nujiang Tethyan oceanic lithospheric slab during the Middle Jurassic. The mélanges provided the material for the formation of andesites, and probably make a substantial contribution to the vertical growth of the continental crust in subduction zones.

Type and evolution of the Middle Jurassic–Early Cretaceous basin at the northern margin of the Lhasa Block: constraints of sedimentary characteristics and provenance tracing based on zircon U-Pb ages

To identify its type and evolution features of the Middle Jurassic–Early Cretaceous basin at the northern margin of the Lhasa Block (NMLB) is of great significance for reconstructing its tectonic-paleogeography and assessing the petroliferous basins in the Bangong-Nujiang suture zone (BNSZ) and its adjacent area. This study conducted the sedimentary characteristic analyses and detrital zircon U-Pb dating of the Middle Jurassic–Lower Cretaceous strata exposed in the northern part of Nagqu County (NPNC), Tibet. The Middle–Upper Jurassic Lagongtang Formation was mainly deposited in a steep slope delta and its middle part is characterized by debris flows moving southeastward. The lower part of the Upper Jurassic–Lower Cretaceous Duoni Formation was characterized by molasses formation, and its middle and upper part were primarily deposited on a tidal flat-mixed shelf. The 384 detrital zircons from the debris-flow deposits of the Lagongtang Formation yielded ages of 2800∼210 Ma, except for one yielding an age of 174 Ma. The detrital zircons from the lower part of the Duoni Formation yielded ages of 2744∼152 Ma. Comprehensive research results show that the basin located at the NMLB is a peripheral foreland basin controlled by the BNSZ and had dual source supply, and around 152 Ma, the basin was accompanied by a stronger overthrust event and experienced the conversion from flysch basin to molasses one. Subsequently, a new foreland basin formed marked by the deposition of the Shamuluo Formation in the BNSZ.

Geochemical constraints on the multistage evolution of the Yilashan ophiolite, central Tibet

The Yilashan ophiolite in the southern part of the central Bangong-Nujiang suture zone comprises variably deformed harzburgite, dunite, and less abundant gabbro and pyroxenite pods and crosscutting veins. Cr-spinels in podiform chromitite bodies are characterized by high Cr# (64.3–74.3), high Mg# (58.2–67.5), and consistently low contents of TiO2 (≤0.12 wt%). Primary melt calculations designate parental boninitic magmas with Al2O3(liquid) contents of 11.67–13.49 wt%, and (FeO/MgO)liquid values of 0.92–1.12.Whole-rock geochemical data of fresh pyroxenite samples are characterized by negative K, Ta, Nb and Zr anomalies, no Eu anomaly, and chondrite-normalized REE patterns comparable to the N-MORB melts. The gabbro samples, in contrast, are high-K calc-alkaline, with elevated contents of LILE (Rb, K, Th) and depleted HFSE (i.e., Nb, Ta, P, Ti), consistent with subduction-related magmas. The fractionated chondrite-normalized REE patterns, high LREE/HREE values, and negative Eu anomalies of these gabbroic rocks are similar to the island arc basalts. Pyroxenite shows high PPGE/IPGE values, variable Pd/Ir (55.7–316.7), and left-leaning primitive mantle-normalized PGE pattern, whereas massive chromitite is enriched in IPGE relative to PPGE. The PGE patterns of pyroxenite and chromitite, though distinct, depict significant fractionation and partial melting in their formation. The elevated contents of PPGEs in pyroxenite suggest derivation from sulfur-saturated magmas as chromitite crystallization scavenged the compatible IPGEs from the parental melt. This assumption is supported by clinopyroxene in pyroxenite with variable Al2O3 contents and variable Cr2O3 contents (0.32 to 0.73 wt%). For the fractionated gabbro unit, zircons yielding a concordia U-Pb age of 162.8 ± 3.0 Ma and widely variable εHf(t) values (−9.2 to +12.0) suggest formation from heterogenous or reworked source materials during a Middle Jurassic subduction increment in the Neo-Tethyan Ocean.

Moho depth inversion in the Tibetan Plateau from high-precision gravity data

The Tibetan Plateau (TP) is the youngest orogenic belt formed by continental collision on the Earth. It is a natural laboratory for studying continental dynamics such as continental convergence, plate subduction, and plateau uplift. Studying its deep structure has always been a hot issue in geological research. The Moho is the interface between the crust and the mantle and is an important interface in the structure of the Earth's circle. Its depth, lateral variation, and fine structure of the crust-mantle interface are important parameters to reveal the process of lithospheric dynamics in the TP. The study of the Moho surface generally has two methods: seismic and gravity. Seismic detection has the characteristics of high precision, but they are limited along a few cross-sectional lines and have a high cost. It is not suitable and cannot be carried out in a large area of the TP; Gravity inversion can obtain large-area Moho depth, but affected by gravity data and inversion methods, the accuracy is lower than that of seismic. In this paper, a high-precision gravity field model is selected. With the constraint of seismic observation, the Parker-Oldenburg interface inversion method is used, and the Bott iteration method is introduced to improve the inversion efficiency. The high-precision Moho depth in the TP is obtained, consistent with the seismic detection results. The research results show that the shape of the Moho in the TP is complex, and the variation range is large, reaching 60-80 km. In sharp contrast with the adjacent area, there is a clear sharpness zone at the plateau's edge. In the TP's interior, the Moho's buried depth is characterized by "two depressions and two uplifts". The Moho in the south of the Yarlung Zangbo River (YZR) inclines to the north, and the Moho in the north depresses downward, interpreted as the Indian plate subducts to the north below Tibet. The Moho depression on the north side of the Qiangtang block (QTB), up to 72 km deep, may be related to the southward subduction of the lithosphere. The Moho uplift of the QTB has the same strike as the Bangong-Nujiang suture zone (BNS), which may reflect that the area is compensated by a low-density and low-velocity mantle.

An Oligocene-Miocene intermontane narrow lowland in the central Tibetan Plateau: Insights from provenance analysis and palynological record of a Cenozoic sedimentary succession

• The Niubao Formation in the Avengco Basin, the western part of the BNSZ, was deposited during Oligocene-Miocene with bidirectional sources. • The Oligocene-Miocene paleoelevation of the Avengco Basin was 3090-3290 m. • A 3 km high intermontane lowland on the BNSZ were formed during the Oligo-Miocene. • This intermontane lowland was probably formed by the reactivation of thrust belts and cloud extend westward to the Avengco Basin. A series of Cenozoic basins are distributed along the Bangong-Nujiang suture zone and amalgamate into an east-west trending topographic lowland. The reconstruction of the formation process for the lowland is critical to understanding the evolution of the Tibetan Plateau and paleoclimate. Here we present results from sedimentology, zircon U-Pb ages, and palynological records of the Niubao Formation in the Avengco Basin, the western part of central Tibet. The Niubao Formation consists of conglomerate, sandstone, siltstone, marl, and limestone, which were deposited in alluvial fan and shallow lake. The palynological assemblages suggest that the Niubao Formation in the Avengco Basin was deposited during the Oligocene-Miocene. Provenance analyses suggest that the Niubao Formation can have bidirectional sources, including the Southern Qiangtang terrane and/or Bangong-Nujiang suture zone in the north and the Northern Lhasa terrane in the south. By using the co-existence approach, palynological records from the Niubao Formation yielded a paleoelevation of 3090-3290 m after temperature and lapse rate correction, which was 1-2 km lower than those of the Lhasa and Qiangtang terranes during the Oligocene-Miocene. Based on the above observations and previous studies from the coeval sediments of the Lunpola and Nima Basins in central Tibet, we propose that the intermontane lowland along the Bangong-Nujiang suture zone was formed as a whole during the Oligocene at the latest and extended to the Avengco Basin in the west.

Paleomagnetism and geochronology of upper Eocene volcanic rocks from the western Qiangtang block: Constraints on the post-collisional shortening in western Tibet

Understanding the dynamics of the uplift of the Tibetan blocks requires constraints on the timing and magnitude of the crustal shortening accommodated by the different blocks. However, the estimates of the magnitude of post-collisional intra-Asian convergence range from >3000 km to a few hundred kilometers. Here we present new paleomagnetic and geochronological results from the Meisu Formation lavas on the southwestern margin of the western Qiangtang block, western Tibet. Zircon U/Pb data reveal that these volcanic rocks erupted during the late Eocene (∼40 Ma). Following progressive thermal demagnetization, stable characteristic remanent magnetizations (ChRMs) were successively isolated from 28 sites. These ChRMs passed the fold and reversal tests, consistent with a primary remanence. The paleopole at 50.2°N, 163.2°E with A 95 = 5.9° yields a paleolatitude of ∼29.5 ± 5.9°N at ca. 40 Ma for the southern margin of the western Qiangtang block (33.2°N, 80.9°E). A comparison of the Eocene latitudes between the western Qiangtang and Tarim block indicates a ∼ 700 km of post-40 Ma latitudinal crustal shortening between them at the longitude of ∼80°E. Our review of published Cretaceous-Paleogene paleopoles from western Tibet suggests that the western Qiangtang block was positioned at a stable latitude during ∼116–30 Ma. Our paleomagnetic compilation also indicate a discrepancy in the latitude (∼9.7 ± 4.3°) of western Lhasa and Qiangtang during the interval of 132 and 67 Ma, which vanished at ca. 30 Ma. We suggest a crustal shortening model to interpret this 1076 ± 477 km discrepancy, which was accommodated by the interior of the Lhasa block, the Bangong-Nujiang suture zone, and/or an eastward extrusion of Indochina from an original position between the Lhasa and Qiangtang blocks during ∼67–30 Ma. We conclude that the crustal shortening caused by the ongoing India-Asia collision spread progressively northwards into Asia. We emphasize that reliable paleomagnetic data from Paleocene and lower Eocene units in the western Qiangtang and Lhasa blocks have the potential to further refine these crustal shortening estimates. • We provide late Eocene paleomagnetic results from western Qiangtang. • The western Qiangtang block had a paleolatitude of 29.5 ± 5.9°N at ca. 40 Ma. • ∼700 km of post-40 Ma N-S crustal shortening between western Qiangtang and Tarim. • ∼1100 km of N-S crustal shortening between western Lhasa and Qiangtang during ∼67–30 Ma. • Crustal shortening spread progressively northwards into Asia.

The first identified oceanic core complex in the Bangong–Nujiang suture zone, central Tibet: New insights into the early Mesozoic tectonic evolution of the Meso-Tethys Ocean

In this paper, we report the first identified oceanic core complex (OCC) in the Saibucuo area of the Bangong-Nujiang suture zone, describe the geology and petrology of this OCC, and present new zircon U-Pb ages and Lu-Hf isotopes, and whole-rock major- and trace-elements and Sr-Nd isotopes for the diabase dikes in this OCC. The Saibucuo OCC consists of serpentinites, serpentinized peridotites, diabase dikes, tectonic breccias, sedimentary breccias, and limestones. The serpentinized peridotites cross-cut by carbonate veins, the sedimentary breccias with simple gravel compositions cut by normal faults, together with the limestones in the cover sequence lead to the conclusion that the Saibucuo OCC is similar to the OCCs of mid-ocean ridge settings. This conclusion is consistent with the E-MORB features of diabase dikes, which are formed by the interaction of the mid-ocean ridge and mantle plume, and the abyssal peridotite features of serpentinized peridotites. Zircon U–Pb ages of the diabase dikes indicate that the Saibucuo OCC was formed at the ca. 190 Ma. Based on these data and regional geological records, the early Mesozoic tectonic evolution of the Meso-Tethys Ocean was restored. The Meso-Tethys Ocean was a broad and mature oceanic basin during the Late Triassic-Early Jurassic. Coeval collision of the Northern and Southern Qiangtang terranes during the Late Triassic initiated the northward subduction of the Meso-Tethys Ocean, and the northward migration of the mid-ocean ridge. Continuous northward subduction of the Meso-Tethys Ocean caused the mid-ocean ridge to gradually approach the northward subduction zone, and eventually to subduct and collide with the northern trench during the Early-Middle Jurassic. The mid-ocean ridge within the Meso-Tethys Ocean was slow spreading during the Early Jurassic.

Terminal stage of divergent double subduction: Insights from Early Cretaceous magmatic rocks in the Gerze area, central Tibet

Divergent double subduction (DDS) plays an important role in facilitating tectonic processes such as ocean closure, accretion and amalgamation of magmatic arcs, and continental growth. However, DDS geodynamics remain poorly constrained, especially its evolution and the accompanying magmatism at the terminal stage. According to geological and geophysical data, the Meso-Tethys Ocean (also known as the Bangong–Nujiang Tethyan Ocean) in central Tibet has been considered a Mesozoic example of DDS, which provides a rare opportunity to evaluate the geodynamic processes of the terminal stage of a DDS system. Here, we present new geochronological, geochemical, and isotopic data of volcanic rocks from the Gerze area in the western segment of the Bangong–Nujiang suture zone (BNSZ). Combined with previous data, we found that the ca. 105 Ma magmatic rocks in the Gerze area are distributed not only along the two sides of the BNSZ but also as manifold types. On the northern side, the magmatism ca. 105 Ma varied, including A-type rhyolites, bajaitic latites, high-Nb basalts, N-MORB-type basalts, adakites and bimodal volcanic rocks, which originated from sources including a sinking oceanic slab, asthenospheric mantle, metasomatized mantle and overlying continental crust. The lithology on the southern side only includes A-type rhyolite and magnesia-rich andesite and adakitic intrusions. Spatial and compositional variations in ca. 105 Ma magmatism should have been the response to slab breakoff, which may have occurred only in the northern branch of the Meso-Tethys oceanic slab after ocean closure. Our results not only verify the existence of slab breakoff in the classical DDS model but also emphasize that breakoff can cause upwelling of the subslab asthenosphere, which leads to a complex magmatic response. • Manifold magmatism from the Gerze area, central Tibet, is active at ca. 105 Ma. • The ca. 105 Ma Gerze magmatic rocks record a slab breakoff event. • Slab breakoff plays an important role in the divergent double subduction system.

Isotope spatiotemporal analysis and prospecting indication based on GIS in Tibet

Tibet has received much attention as a pivotal area to explore the genesis of ore deposits. So far, a large number of researchers have conducted a lot of discussions on the geological conditions, genesis, distribution and scale of ore deposits in Tibet, and accumulated a plenty of isotopic test data. Isotopic data can reveal the geological changes of an area and analyze the metallogenic regularity. In this paper, combined with GIS (Geographic Information System) spatiotemporal analysis technology, Hf and Nd isotopic data mapping analysis has been carried out in Tibet. The mapping shows high zircons εHf(t) value and high whole rock εNd(t) value and low TDMc value on both sides of the Eastern Yarlung Zangbo Suture Zone and the Western Bangong-Nujiang Suture Zone. It indicates that the terranes in these two areas are relatively young and have typical characteristics of Cu and Au mineralization, which are favorable areas for the prospecting of Cu and Au. Combined with the geological fault characteristics of Tibet Plateau, the influence of terrane boundary on the deposit and the relevant characteristics of geochemical elements, three favorable targets for Cu and Au prospecting in Tibet Plateau are delineated by GIS analysis. The results show that the characteristics of isotopic data in Tibet Plateau are quite different in disparate terranes, and the isotopic analysis can quickly delineate the strategic prospecting targets. Therefore, using GIS technology for isotope analysis and metallogenic prediction provides important guiding significance for scientific prospecting.

Newly recognized retrograde eclogites overprinted by high‐temperature metamorphism in the Amdo microcontinent, Central Tibet: Implications for subduction erosion during continental subduction

The Amdo microcontinent located within the Bangong–Nujiang Suture Zone (BNSZ) holds one of the important keys to understand the tectonic evolution of Central Tibet before the Qiangtang‐Lhasa terrane collision during the Mesozoic. Newly discovered eclogites were reported within the Amdo microcontinent in this study, and their metamorphic evolution is deciphered by petrographic observations, pseudosection modelling, geochemistry, and zircon U–Pb dating. The eclogites are characterized by peak metamorphic mineral assemblages of garnet, omphacite, rutile, and quartz, and underwent a four‐stage metamorphic evolution, including eclogite facies stage (M1) at ~20–24 kbar and 580–620°C, followed by HP granulite facies decompression stage (M2) at ~13–15 kbar and 750–780°C, subsequent MP–HT granulite facies heating stage (M3) at 8–10 kbar and >840°C, and final amphibolite facies retrogression (M4) at 5.3–6.0 kbar and 560–580°C. The eclogites exhibit rare earth element (REE) distribution patterns and trace element abundance similar to those of N‐MORB and arc‐related volcanics, which are inferred to have formed in a back‐arc Basin tectonic setting. Zircon U–Pb dating yields eclogite facies metamorphic age of 190 ± 1 Ma. The clockwise P–T–t paths and the oceanic protolith signature of retrograde eclogites suggest that part of the back‐arc Basin was subducted to the depths of ~80 km. The subsequent ultra‐high temperature metamorphic overprinting may be related to the upwelling of the asthenosphere. Tectonic erosion associated with the subduction of the Amdo microcontinent beneath the Tethys Ocean accounts for the deep subduction of the back‐arc Basin and the absence of arc magmatic rocks in the northern Amdo microcontinent.

Bidirectional subduction of the Bangong-Nujiang ocean revealed by deep-crustal seismic reflection profile

It is well known that the Tibetan plateau exposes a series of terranes that were drifted northward and accreted progressively onto the south margin of Eurasia resulting from ocean closure. However, the processes associated with the ocean closure remains poorly unconstrained. One such issue is whether the demise of the Bangong-Nujiang ocean between the Lhasa and Qiangtang terranes were caused by northward subduction only or both northward and southward subduction. To address this issue, we analyze high-resolution seismic reflection data along a 275-km north-south traverse across the Bangong-Nujiang suture zone. Our work shows that the Moho of the Lhasa terrane lies at 22.5 s (two-way travel time) and the Moho of the Qiangtang terrane lies at 20 s. In the Lhasa terrane, the reflection profile reveals an X-shaped structure that segmented south-dipping reflectors are truncated by continuous north-dipping reflectors. Based on the existing geological and geophysical observations and the cross-cutting relationships among seismic reflectors, we propose that the fossil relics of south-dipping reflectors with relatively weak amplitude in Lhasa terrane were created by the Mesozoic southward subduction of the Bangong-Nujiang ocean, and the north-dipping reflectors were triggered by the younger Cenozoic deformation during the India-Asia collision. In the Qiangtang terrane, our seismic reflection profile displays an antiformal structure with a set of north-dipping reflections in the lower crust, which we interpret as triggered by the northward subduction of the Bangong-Nujiang ocean. The structures as revealed by our seismic observations as a whole indicate that the closure of the Bangong-Nujiang ocean was created by bidirectional oceanic subduction.