Bacterial Magnetic Particles Research Articles

Fully automated immunoassay for detection of prostate-specific antigen using nano-magnetic beads and micro-polystyrene bead composites, ‘Beads on Beads’

Magnetic beads have served as a conventional bioassay platform in biotechnology. In this study, a fully automated immunoassay was performed using novel nano- and microbead-composites constructed by assembling nano-magnetic beads onto polystyrene microbeads, designated ‘Beads on Beads’. Nano-sized bacterial magnetic particles (BacMPs) displaying the immunoglobulin G (IgG)-binding domain of protein A (ZZ domain) were used for the construction of ‘Beads on Beads’ via the interaction of biotin–streptavidin. The efficient assembly of ‘Beads on Beads’ was performed by gradual addition of biotin-labeled BacMPs onto streptavidin-coated polystyrene microbeads. Approximately 2000 BacMPs were uniformly assembled on a single microbead without aggregation. The constructed ‘Beads on Beads’ were magnetized and separated from the suspension by using an automated magnetic separation system with a higher efficiency than BacMPs alone. Furthermore, fully automated detection of prostate-specific antigens was performed with the detection limit of 1.48 ng mL −1. From this preliminary assay, it can be seen that ‘Beads on Beads’ could be a powerful tool in the development of high-throughput, fully automated multiplexed bioassays.

High-throughput SNP detection using nano-scale engineered biomagnetite

A semi-automated system for the large-scale detection of single nucleotide polymorphisms (SNPs) has been developed based on allele-specific oligonucleotide hybridization and thermal dissociation curve analysis using nano-scale engineered biomagnetite (bacterial magnetic particles; BacMPs). For reliable detection in large numbers of samples, several conditions for the capture of target DNA on nano-sized BacMPs and the denaturation of double-stranded DNA were optimized. The most efficient target DNA capture was observed using short PCR amplicons (69 bp). Captured DNAs were denatured using 50 mM NaOH. With these optimizations, large-scale SNP detection was performed on 822 samples of the transforming growth factor (TGF)-β1 gene, which is rich in both GC content and repetitive sequences. High reliability for the semi-automated BacMP-based SNP detection system was confirmed following comparison to traditional sequencing-based methods.

Detection of epidermal growth factor receptor (EGFR) mutations in non-small cell lung cancer (NSCLC) using a fully automated system with a nano-scale engineered biomagnetite

A fully automated system using nano-scale engineered biomagnetite was developed to detect mutations in the epidermal growth factor receptor (EGFR) gene in non-small cell lung cancer (NSCLC). Bacterial magnetic particles (BacMPs) were isolated from the magnetic bacterium Magnetospirillum magneticum AMB-1 and conjugated to streptavidin. Biotin-labeled target PCR products were then captured with the BacMPs, hybridized with the detection probe and detected by fluorescence signaling. The process was performed using a newly designed automated processor equipped with an XYZ mobile arm containing a 96-way automated pipetter, reagent dispenser and fluorescence detector. Two types of somatic mutations (in-frame deletions and point substitutions) in the EGFR gene were successfully identified within 3.5 h using this system, suggesting that this system could be used in clinical tests of EGFR gene mutations in lung cancer, and potentially other cancer, patients. Additionally, a very low mutation rate could be detected in these samples.

Magnetic separation of CD14 + cells using antibody binding with protein A expressed on bacterial magnetic particles for generating dendritic cells

Herein the potential of a highly efficient cell separation system using bacterial magnetic particles expressing protein A (protein A-BacMPs) was demonstrated. Protein A was expressed on BacMPs using the transmembrane proteins Mms13 and MagA as anchor molecules. The evaluations of the numbers of bound antibody molecules and binding capabilities of the protein A-BacMPs using Mms13 indicated that the antibodies were efficiently introduced into protein A-BacMPs using Mms13 in comparison to MagA. In addition, the recovery ratio of the target cells on the magnetic cell separation system was enhanced by using protein A-BacMPs with Mms13. Using positive selection against peripheral blood mononuclear cells, the CD14 + cells were separated at a purity of more than 99% by protein A-BacMPs using Mms13. Furthermore, in the evaluation of the influence of protein A-BacMPs on the separated cells, the CD14 + cells separated using protein A-BacMPs and were successfully differentiated into dendritic cells.

Simultaneous detection of multiple mutations conferring streptomycin resistance inMycobacterium tuberculosis using nanoscale engineered biomagnetites

Streptomycin-resistantMycobacterium tuberculosis has been attributed to two distinct classes of mutations, including point mutations within therpsL gene (three mutation sites) and therrs gene (seven mutation sites). We have developed an automated simultaneous detection system of multiple mutations based on thermal dissociation curve analysis for streptomycin resistance inM. tuberculosis using streptavidin-labeled bacterial magnetic particles (SA-BacMPs). With consideration for time and cost effectiveness, we used fewer PCR reactions, with a long PCR target (rpsL, 182 bp;rrs, 467 bp) including multiple mutation sites. In order to improve the amount of target DNA captured on BacMPs through streptavidin-biotin binding, several reaction conditions, such as salt species and concentration in the buffer, and reaction temperature were examined. Compared to the commonly used 1M NaCl solution, the amount of DNA captured on SA-BacMPs was about six times greater (approx 5 pmoles/50 μg BacMPs) in the 2M LiCl solution. Under these conditions, automated nucleotide discriminations of 10 targets inrpsL andrrs genes of streptomycin-resistant and wild-type strains were successfully performed at the same time.

Automated DNA extraction from genetically modified maize using aminosilane-modified bacterial magnetic particles

A novel, automated system, PNE-1080, equipped with eight automated pestle units and a spectrophotometer was developed for genomic DNA extraction from maize using aminosilane-modified bacterial magnetic particles (BMPs). The use of aminosilane-modified BMPs allowed highly accurate DNA recovery. The (A(260)-A(320)):(A(280)-A(320)) ratio of the extracted DNA was 1.9+/-0.1. The DNA quality was sufficiently pure for PCR analysis. The PNE-1080 offered rapid assay completion (30 min) with high accuracy. Furthermore, the results of real-time PCR confirmed that our proposed method permitted the accurate determination of genetically modified DNA composition and correlated well with results obtained by conventional cetyltrimethylammonium bromide (CTAB)-based methods.

Efficient and Stable Display of Functional Proteins on Bacterial Magnetic Particles Using Mms13 as a Novel Anchor Molecule

Magnetic particles are increasingly used for various biomedical applications because they are easy to handle and separate from biological samples. In this work, a novel anchor molecule was used for targeted protein display onto magnetic nanoparticles. The magnetic bacterium Magnetospirillum magneticum AMB-1 synthesizes intracellular bacterial magnetic particles (BMPs) covered with a lipid bilayer membrane. In our recent research, an integral BMP membrane protein, Mms13, was isolated and used as an anchor molecule to display functional proteins onto BMPs. The anchoring properties of Mms13 were confirmed by luciferase fusion studies. The C terminus of Mms13 was shown to be expressed on the surface of BMPs, and Mms13 was bound to magnetite directly and tightly permitting stable localization of a large protein, luciferase (61 kDa), on BMPs. Consequently, luminescence intensity obtained from BMPs using Mms13 as an anchor molecule was >400 or 1,000 times higher than Mms16 or MagA, which previously were used as anchor molecules. Furthermore, the immunoglobulin G-binding domain of protein A (ZZ) was displayed uniformly on BMPs using Mms13, and antigen was detected by transmission electron microscopy using antibody-labeled gold nanoparticles on a single BMP displaying the ZZ-antibody complex. The results of this study demonstrated the utility of Mms13 as a molecular anchor, which will facilitate the assembly of other functional proteins onto BMPs in the near feature.

Capture and release of DNA using aminosilane-modified bacterial magnetic particles for automated detection system of single nucleotide polymorphisms

Bacterial magnetic particles (BMPs) were modified with 3-[2-(2-aminoethylamino)-ethylamino]-propyltrimethoxysilane (AEEA) to produce a dense amine surface. Modification of BMPs in a toluene solution resulted in an increased amine yield, and approximately 11.3 x 10(4) surface amines were detected on a single particle. The modified BMPs were capable of efficient electrostatic capture of DNA. The maximum amount of DNA captured on 10 microg of aminosilane-modified BMPs was 600 ng. A 10 mM phosphate buffer effectively released the captured DNA. This efficiency was dramatically enhanced by incubation at 80 degrees C and DNA recovery from aminosilane-modified BMPs approached 95%. DNA extraction from whole blood using these modified BMPs, followed by PCR, was successfully performed. Furthermore, automated single nucleotide polymorphism (SNP) detection of the aldehyde dehydrogenase 2 (ALDH2) was demonstrated.

Development of efficient expression system for protein display on bacterial magnetic particles

Bacterial magnetic particles (BMPs) are utilized for various biomedical applications because they are easily manipulated by magnets, and functional proteins are easily displayed on BMPs. To establish highly expressed protein display on BMPs, strong promoters were identified using Magnetospirillum magneticum AMB-1 genome and proteome databases. Initially, several proteins highly expressed in AMB-1 were identified, and the upstream DNA sequences of the open-reading frames were evaluated using a luciferase-reporter gene assay to compare promoter activities. Consequently, luminescence intensity was 400 times higher due to the novel promoter identified in this study than the magA promoter previously used. Subsequently, efficient protein display on BMPs was performed using the newly identified promoter sequences. This developed display system will facilitate the assembly of various functional proteins onto BMPs to create novel magnetic nanoparticles.

Novel detection system for biomolecules using nano-sized bacterial magnetic particles and magnetic force microscopy

A system for streptavidin detection using biotin conjugated to nano-sized bacterial magnetic particles (BMPs) has been developed. BMPs, isolated from magnetic bacteria, were used as magnetic markers for magnetic force microscopy (MFM) imaging. The magnetic signal was obtained from a single particle using MFM without application of an external magnetic field. The number of biotin conjugated BMPs (biotin-BMPs) bound to streptavidin immobilized on the glass slides increased with streptavidin concentrations up to 100 pg/ml. The minimum streptavidin detection limit using this technique is 1 pg/ml, which is 100 times more sensitive than a conventional fluorescent detection system. This is the first report using single domain nano-sized magnetic particles as magnetic markers for biosensing. This assay system can be used for immunoassay and DNA detection with high sensitivities.

Development of a novel method for screening of estrogenic compounds using nano-sized bacterial magnetic particles displaying estrogen receptor

In this study, nano-sized bacterial magnetic particles (BMPs) displaying human estrogen receptor ligand binding domain (ERLBD) on the surface was successfully produced by the magnetic bacterium, Magnetospirillum magneticum AMB-1. Furthermore, a non-isotopic binding assay for estrogenic compounds using the BMPs displaying ERLBD was developed. A BMP membrane-specific protein, Mms16, was used as an anchor molecule to localize ERLBD on the surface of BMPs. ERLBD–BMP complexes were simply extracted by magnetic separation from ruptured AMB-1 transformants and used for the assay based on the competitive binding of alkaline phosphatase conjugated 17β-estradiol (ALP-E2) as a tracer. Dissociation constant of the receptor was 2.3 nM. Inhibition curves were evaluated by the decrease in luminescence intensity resulting from the enzymatic reaction of alkaline phosphatase. The overall simplicity of this receptor binding assay results in a method that can be easily adapted to a high throughput format. Moreover, this method can be integrated into a fully-automated ligand screening system using magnetic separation.

Magnetic Cell Separation Using Antibody Binding with Protein A Expressed on Bacterial Magnetic Particles

Bacterial magnetic particles (BacMPs) are efficient platforms of proteins for surface display systems. In this study, mononuclear cells from peripheral blood were separated using BacMPs expressing protein A on the BacMP membrane surface (protein A-BacMPs), which were complexed with the Fc fragment of anti-mouse IgG antibody. The procedure of positive selection involves incubation of mononuclear cells and mouse monoclonal antibodies against different cell surface antigens (CD8, CD14, CD19, CD20) prior to treatment with protein A-BacMP binding with rabbit anti-mouse IgG secondary antibodies. Flow cytometric analysis showed that approximately 97.5 +/- 1.7% of CD19(+) and CD20(+) cells were involved in the positive fraction after magnetic separation. The ratio of the negative cells in the negative fraction was approximately 97.6 +/-1.4%. This indicates that CD19(+) and CD20(+) cells can be efficiently separated from mononuclear cells. Stem cell marker (CD34) positive cells were also separated using protein A-BacMP binding with antibody. May-Grunwald Giemsa stain showed a high nuclear/cytoplasm ratio, which indicates a typical staining pattern of stem cells. The separated cells had the capability of colony formation as hematopoietic stem cells. Furthermore, the inhibitory effect of magnetic cell separation on CD14(+) cells was evaluated by measurement of cytokine in the culture supernatant by ELISA when the cells were cultured with or without lipopolysaccharide (LPS). The induction of IL1-beta, TNFalpha, and IL6 was observed in the presence of 1 ng/mL LPS in all fractions. On the other hand, in the absence of LPS, BacMPs had little immunopotentiation to CD14(+) cells as well as that of artificial magnetic particles, although TNFalpha and IL6 were slightly induced in the absence of LPS in the positive fraction.

Spontaneous integration of transmembrane peptides into a bacterial magnetic particle membrane and its application to display of useful proteins.

An antimicrobial peptide, temporin L, and its derivative (TL-A2) were employed as anchor peptides and displayed streptavidin on a bacterial magnetic particle (BMP) membrane. The ribotoxin L3 loop (L3) and the arginine-chain peptide (R(12)), which are carrier peptides permeable to eukaryotic cell membranes, were also used. The peptides were labeled with a fluorescent dye, 4-fluoro-7-nitrobenzofurazan (NBD), at the N-terminal region (NBD-peptides) and mixed with BMPs. A specific integration of NBD-temporin L into a BMP membrane was observed. The basic amino acids in temporin L played an important role in the integration into BMPs. Biotin conjugated to the N-terminus of temporin L was integrated into a BMP membrane. The C-terminus of temporin L was incorporated into a BMP membrane, and the N-terminus was located on the BMP membrane surface. The present study shows that temporin L is a stable molecular anchor on BMPs by the binding of soluble protein to the N-terminus.

Rapid and sensitive detection of 17β-estradiol in environmental water using automated immunoassay system with bacterial magnetic particles

A fully automated immunoassay of 17β-estradiol (E2) was performed using anti-E2 monoclonal antibody immobilized on bacterial magnetic particles (AntiE2-BMPs) and alkaline phosphatase-conjugated E2 (ALP-E2). E2 concentration in environmental water samples was evaluated by decrease in luminescence based on competitive reaction. A linear correlation between the luminescence intensity and E2 concentration was obtained between 0.5 and 5 ppb. The minimum detectable concentration of E2 was 20 ppt. All measurement steps were done within 0.5 h. The analysis of environmental water samples by a commercially available ELISA kit and the BMP-based immunoassay gave good correlation plots with a correlation efficient of 0.992. These results suggest that the fully automated system using the BMP-based immunoassay has some advantages in the high rapidity and sensitivity of the measurement. This system will enable us to determine low E2 concentrations without sample condensation.

Biotechnological application of nano-scale engineered bacterial magnetic particles

Magnetic particles have been studied with much interest with reference to many engineering applications. Much effort has been devoted to the preparation of nano-sized magnetite particles with well-controlled size and shape. Magnetic bacteria synthesize uniform and nano-sized magnetite particles enveloped by organic lipid membranes. This review discusses recent advances in bacterial magnetite particles. Especially, the tremendous biotechnological potential of bacterial magnetite particles (BMPs) and our recent understanding of mechanism of magnetite particle formation in Magnetospirillum magneticum strain AMB-1 were highlighted.

Development and evaluation of an automated workstation for single nucleotide polymorphism discrimination using bacterial magnetic particles

We designed an automated workstation for magnetic particle-based single nucleotide polymorphism (SNP) discrimination of ALDH genotypes. Bacterial magnetic particles (BMPs) extracted from Magnetospirillum magneticum AMB-1 were used as DNA carriers. The principle for SNP discrimination in this study was based on fluorescence resonance energy transfer (FRET) between FITC (donor) and POPO-3 (acceptor) bound to double-stranded DNA. The workstation is equipped with a 96-way automated pipetter which collects and dispenses fluids as it moves in x- and z-directions. The platform contains a disposable tip rack station, a reagent vessel serving as a stock for POPO-3 and FITC-labeled probes and a reaction station for a 96-well microtiter plate. BMPs were collected by attaching a neodymium iron boron sintered (Nd–Fe–B) magnet on the bottom of the microtiter plate. This system permits the simultaneous heating and magnetic separation of 96 samples per assay. The genotypes ALDH2*1 and ALDH2*2 were discriminated by calculating the relative fluorescence intensities on BMPs.

Single nucleotide mismatch analysis using oligonucleotide probes synthesized on bacterial magnetic particle

An approach to analyze mismatches using short and specific oligonucleotide probes directly synthesized on bacterial magnetic particles (BMPs) by phosphoramidite methods was exploited. Approximately 126 molecules of 4-mer oligonucleotides/particle were synthesized on BMPs with high reaction efficiencies. Hybridization between FITC-labeled oligonucleotides and chemically synthesized oligonucleotides on BMPs was performed. Perfect matched and mismatched hybridizations were successfully discriminated by using the oligonucleotide probes on BMPs.

Characterization of aldehyde ferredoxin oxidoreductase gene defective mutant in Magnetospirillum magneticum AMB-1

A non-magnetic mutant of Magnetospirillum magneticum AMB-1, designated as NMA21, was generated by mini-Tn5 transposon mutagenesis to identify genes involved in bacterial magnetic particle (BMP) synthesis. Alignment of the DNA sequences flanking the transposon allowed the isolation of an open reading frame (ORF2) within an operon consisting of five genes. The amino acid sequence of ORF2 showed homology with tungsten-containing aldehyde ferredoxin oxidoreductase (AOR) from Pyrococcus furiosus (48% identity and 64% similarity), which functions for aldehyde oxidation. AOR was found to be expressed under microaerobic conditions and localized in the cytoplasm of AMB-1. Iron uptake and growth of NMA21 were lower than wild type. Transmission electron microscopy (TEM) of NMA21 revealed that no BMPs were completely synthesized, but polyhydroxybutyrate (PHB)-like granules were persistently produced. These results indicate that AOR may contribute to ferric iron reduction during BMP synthesis in M. magneticum AMB-1 under microaerobic respiration.

A Novel Protein Tightly Bound to Bacterial Magnetic Particles in Magnetospirillum magneticum Strain AMB-1

Magnetic bacteria synthesize magnetite crystals with species-dependent morphologies. The molecular mechanisms that control nano-sized magnetite crystal formation and the generation of diverse morphologies are not well understood. From the analysis of magnetite crystal-associated proteins, several low molecular mass proteins tightly bound to bacterial magnetite were obtained from Magnetospirillum magneticum strain AMB-1. These proteins showed common features in their amino acid sequences, which contain hydrophobic N-terminal and hydrophilic C-terminal regions. The C-terminal regions in Mms5, Mms6, Mms7, and Mms13 contain dense carboxyl and hydroxyl groups that bind iron ions. Nano-sized magnetic particles similar to those in magnetic bacteria were prepared by chemical synthesis of magnetite in the presence of the acidic protein Mms6. These proteins may be directly involved in biological magnetite crystal formation in magnetic bacteria.

Single nucleotide polymorphism genotyping of aldehyde dehydrogenase 2 gene using a single bacterial magnetic particle

A single nucleotide polymorphism (SNP) genotyping for aldehyde dehydrogenase 2 gene ( ALDH2) has been developed by using a nano-sized magnetic particle, which was synthesized intracellularly by magnetic bacteria. Streptavidin-immobilized on bacterial magnetic particles (BMPs) were prepared using biotin labeled cross-linkers reacting with the amine group on BMPs. ALDH2 fragments from genomic DNA were amplified using a TRITC labeled primer and biotin labeled primer pair, and conjugated onto BMP surface by biotin-streptavidin interaction. PCR product–BMP complex was observed at a single particle level by fluorescence microscopy. These complexes were treated with restriction enzyme, specifically digesting the wild-type sequence of ALDH2 (normal allele of ALDH2). The homozygous ( ALDH2*1/*1), heterozygous ( ALDH2*1/*2), and mutant ( ALDH2*2/*2) genotypes were discriminated by three fluorescence patterns of each particle. SNP genotyping of ALDH2 has been successfully achieved at a single particle level using BMP.