Composition Of Background Electrolyte Research Articles

Enantioselective micellar electrokinetic chromatography of dl-amino acids using (+)-1-(9-fluorenyl)-ethyl chloroformate derivatization and UV-induced fluorescence detection.

Chiral analysis of dl‐amino acids was achieved by micellar electrokinetic chromatography coupled with UV‐excited fluorescence detection. The fluorescent reagent (+)‐1‐(9‐fluorenyl)ethyl chloroformate was employed as chiral amino acid derivatizing agent and sodium dodecyl sulfate served as pseudo‐stationary phase for separating the formed amino acid diastereomers. Sensitive analysis of (+)‐1‐(9‐fluorenyl)ethyl chloroformate‐amino acids was achieved applying a xenon‐mercury lamp for ultraviolet excitation, and a spectrograph and charge‐coupled device for wavelength‐resolved emission detection. Applying signal integration over a 30 nm emission wavelength interval, signal‐to‐noise ratios for derivatized amino acids were up to 23 times higher as obtained using a standard photomultiplier for detection. The background electrolyte composition (electrolyte, pH, sodium dodecyl sulfate concentration, and organic solvent) was studied in order to attain optimal chemo‐ and enantioseparation. Enantioseparation of 12 proteinogenic dl‐amino acids was achieved with chiral resolutions between 1.2 and 7.9, and detection limits for most derivatized amino acids in the 13–60 nM range (injected concentration). Linearity (coefficients of determination > 0.985) and peak‐area and migration‐time repeatabilities (relative standard deviations lower than 2.6 and 1.9%, respectively) were satisfactory. The employed fluorescence detection system provided up to 100‐times better signal‐to‐noise ratios for (+)‐1‐(9‐fluorenyl)ethyl chloroformate‐amino acids than ultraviolet absorbance detection, showing good potential for d‐amino acid analysis.

Cyclic band compression in toroidal capillary electrophoresis delivers an unlimited number of theoretical plates with a quadratic growth in time and a constant peak capacity.

Analytical instruments able to provide extremely high sensitivities, separation efficiencies, and peak capacities are important for both applied sciences and basic research. It is even more interesting if this can be achieved within organic, aqueous, and physiological solutions without restricting the operation parameters, such as buffer pH, temperature, ionic strength, and background electrolyte composition. Toroidal capillary electrophoresis offers this potential, as was recently proposed and demonstrated. In this platform, the analytes perform continuous round trips inside a fused-silica capillary having a torus-like shape. In the present work, the equations of the number of plates and peak capacity are deduced when on-column cyclic thermal band compression is applied. They are expressed as a function of the number of turns performed by the analyte, axial length of the toroid, number of microholes (reservoirs), compression factor, number of compression events performed per turn, and applied voltage. It was found that the variances of the bands reach a steady state, regardless of the number of dispersion mechanisms present. Consequently, the number of theoretical plates grows indefinitely as the square of time. The expression of peak capacity shows a well-defined limiting value that remains constant over time.

Short-sweep capillary electrophoresis with a selective zinc fluorescence imaging reagent FluoZin-3 for determination of free and metalothionein-2a-bound Zn2+ ions

A capillary electrophoretic (CE) method using a short-sweep approach and laser-induced fluorescence (LIF) detection (ShortSweepCE-LIF) was developed for determination of Zn2+ and Cd2+ as complexes with highly selective and sensitive fluorescent probe FluoZin-3. The ShortSweepCE-LIF method, established in this work, can be used for examining competitive Zn2+ and Cd2+ binding properties of metalloproteins or peptides. The parameters including background electrolyte composition, injection pressure and time as well as separation voltage were investigated. Under the optimized conditions, 80 mM HEPES, pH 7.4, with 1.5 μM FluoZin-3 was used as an electrolyte, hydrodynamic injection was performed at 50 mbar for 5 s, and separation voltage of 25 kV. Limits of detection for Zn2+ and Cd2+ were 4 and 125 nM, respectively. The developed method was demonstrated in a study of interactions between metalothionein-2a isoform and metal ions Zn2+, Co2+ and Cd2+. It was found that FluoZin-3 was able to extract a single Zn2+ ion, while added Co2+ (in surplus) extracted only 2.4 Zn2+ ions, and Cd2+ extracted all 7 Zn2+ ions present in the metalothionein molecule.

Computational contribution to the electrophoretic enantiomer separation mechanism and migration order using modified β-cyclodextrins.

Capillary electrophoresis (CE) is an extremely effective technique in many kinds of separations, including separation of enantiomers. Some additional techniques may be necessary to determine the enantiomer migration order (EMO) and also the mechanism involved in chiral recognition. This paper reports the development and optimization of a CE method for enantioseparation of racemic mixture of both R- and S-stereoisomers of tramadol (TRM) with a computational contribution for the EMO determination and the responsible mechanisms for chiral distinction. Parameters such as composition and concentration of background electrolyte (BGE) and type and concentration of cyclodextrins (CD) were evaluated. For calculations, a sequential methodology was used, resorting to semiempirical Parametric Model 3 (PM3) followed by calculations accomplished using density functional theory. The best results were obtained with sulfated-β-CD (s-β-CD) and carboxymethyl-β-cyclodextrin (cm-β-CD) as chiral selector. Calculations show that the inclusion of TRM is not a probable process due to the shape of the TRM molecule and the size CDs cavities. Therefore, the chiral recognition process occurs by the formation of association complexes between modified β-CD and groups of TRM molecules. The structural analysis of the fragments of complexes at a pH of 10 and a thermodynamic analysis of the complexes' formation process allows determining the EMO. Comparing results obtained experimentally and computationally, it seems that the developed method is adequate for separation of TRM enantiomers and the computational methodology is also adequate to get a sense of the system at a molecular level.

Improved sensitivity by post-column chemical environment modification of CE-ESI-MS using a flow-through microvial interface.

Post-column chemical environment modification can affect detection sensitivity and signal appearance when capillary electrophoresis is coupled through electrospray ionization to mass spectrometry (CE-ESI-MS). In this study, changes in the signal intensity and peak shape of N-Acetylneuraminic acid (Neu5Ac) were examined when the modifier solution used in a flow-through microvial interface for CE-ESI-MS was prepared using an acidic or basic background electrolyte (BGE) composition. The use of a basic modifier resulted in improved detection compared to the results obtained when an acidic modifier was used in negative ion mode. Increased sensitivity and more symmetrical peak shape were obtained. Using an acidic modifier, the LOD of Neu5Ac was 47.7nM, whereas for a basic modifier, the LOD of Neu5Ac was 5.20nM. The calculated asymmetry factor at 100nM of Neu5Ac ranged from 0.71 to 1.5 when an acidic modifier was used, while the factor ranged from 1.0 to 1.1 when a basic modifier was used. Properly chosen post-column chemical modification can have a significant effect on the performance of the CE-MS system.

Insights into head-column field-amplified sample stacking: Part I. Detailed study of electrokinetic injection of a weak base across a short water plug

The fundamentals of electrokinetic injection of the weak base methadone across a short water plug into a phosphate buffer at low pH were studied experimentally and with computer simulation. The current during electrokinetic injection, the formation of the analyte zone, changes occurring within and around the water plug and mass transport of all compounds in the electric field were investigated. The impact of water plug length, plug injection velocity, and composition of sample, plug and background electrolyte are discussed. Experimental data revealed that properties of sample, water plug and stacking boundary are significantly and rapidly altered during electrokinetic injection. Simulation provided insight into these changes, including the nature of the migrating boundaries and the stacking of methadone at the interface to a newly formed phosphoric acid zone. The data confirm the role of the water plug to prevent contamination of the sample by components of the background electrolyte and suggest that mixing caused by electrohydrodynamic instabilities increases the water plug conductivity. The sample conductivity must be controlled by addition of an acid to prevent generation of reversed flow which removes the water plug and to create a buffering environment. Results revealed that a large increase in background electrolyte concentration is not accompanied with a significant increase in stacking.

Quantitative Nonaqueous Capillary Electrophoresis-Mass Spectrometry Method for Determining Active Ingredients in Plant Extracts.

Nonaqueous capillary electrophoresis (NACE) is very well suited for online coupling with mass spectrometry due to the relatively high volatility and low surface tension of most organic solvents. Here we present a quantitative NACE-ESI-MS/MS method for separating and determining physcion, chrysophanol, and aloe-emodin in rhubarb. Dantron was used as an internal standard to ensure accuracy and reproducibility in quantitative analyses. Parameters including the pH, background electrolyte (BGE) composition, flow-through microvial chemical modifier solution composition, and modifier solution flow rate were carefully optimized. The developed method was validated by assessing its precision, LODs, and linear range. The contents of physcion, chrysophanol, and aloe-emodin in rhubarb were determined to be 0.22%, 1.0%, and 0.17%, respectively.

Optimization of capillary electrophoresis method for the determination of rare earth elements in soils and natural waters

Currently, rare earth elements (REEs) in the environmental objects are determined by neutron activation and ICP-MS methods. Capillary electrophoresis (CE) is not used for these purposes because the poor detection limits (LOD). This weakness can be overcome by multiple concentrating of the samples through the high effective sample stacking process of triply charged ions Ln3+. LOD for REEs were received ranged from 0.2 to 1.2μg/l. The following composition of background electrolyte for CE determination of lanthanides was proposed: 12mM benzimidazole, 8mM dipropylglycolic acid, 10mM glycolic acid, pH=3.0. Using this background electrolyte the completely separation of REEs (Y+La+Ln without Pm) is possible for 12min. The sample preparation procedure for CE determination of lanthanides in soil and natural water was improved and the analysis of these analytes was performed. The validity of experimental results was confirmed by AES and ICP-AES methods.

Electrochemical Transformation of Trace Organic Contaminants in the Presence of Halide and Carbonate Ions.

Electrochemical treatment on anodes shows promise for the oxidation of organic contaminants in industrial wastewater and reverse osmosis concentrate from municipal wastewater recycling due to the high conductivity of the matrix and the concomitant low energy demand. The effect of background electrolyte composition (Cl–, HCO3–, and NH4+) on the formation and fate of electrochemically produced heterogeneous (HO•ads and Cl•ads) and homogeneous (HOCl and HOBr) oxidants was evaluated on Ti–IrO2 and boron-doped diamond (BDD) electrodes using a suite of trace organic contaminants that exhibited varying reactivity with HO•, CO3•–, HOCl, and HOBr. The contributions of adsorbed and bulk oxidants to contaminant degradation were investigated. Results show that transformation rates for most contaminants increased in the presence of chloride and trace amounts of bromide; however, elevated concentrations of HCO3– often altered transformation rates due to formation of selective oxidants, with decreases in reactivity observed for electron-poor contaminants and increases in reactivity observed for compounds with amine and phenolic moieties. Using this information, rates of reactions on anode surfaces and measured production and loss rates for reactive homogeneous species were used to predict contaminant removal in municipal wastewater effluent. Despite some uncertainty in the reaction mechanisms, the model accurately predicted rates of removal of electron-rich contaminants but underestimated the transformation rates of compounds that exhibited low reactivity with HOCl and HOBr, possibly due to the formation of halogen radicals. The approach employed in this study provides a means of identifying key reactions for different classes of contaminants and for predicting the conditions under which anodic treatment of wastewater will be practical.

Monitoring the Palladium Contents in the Tailings Using Stripping Voltammetry

Anodic stripping voltammetry, a classical electroanalytical method has been optimized to analyze trace Pd (II) in tailings. The authors identified the registration conditions in the determination of the analytical signal Pd (II): the composition of background electrolyte and the electrolysis potential. The electroanalytical approaches with an unmodified carbon electrode were used. The use of stripping voltammetry applied to the assessment of the palladium content in geological objects was demonstrated.

Potential of capillary electrophoresis mass spectrometry for the characterization and monitoring of amine-derivatized naphthenic acids from oil sands process-affected water

Capillary electrophoresis coupled to mass spectrometry (CE–MS) was used for the analysis of naphthenic acid fraction compounds (NAFCs) of oil sands process-affected water (OSPW). A standard mixture of amine-derivatized naphthenic acids is injected directly onto the CE column and analyzed by CE–MS in less than 15min. Time of flight MS analysis (TOFMS), optimized for high molecular weight ions, showed NAFCs between 250 and 800m/z. With a quadrupole mass analyzer, only low-molecular weight NAFCs (between 100 and 450m/z) are visible under our experimental conditions. Derivatization of NAFCs consisted of two-step amidation reactions mediated by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC), or mediated by a mixture of EDC and N-hydroxysuccinimide, in dimethyl sulfoxide, dichloromethane or ethyl acetate. The optimum background electrolyte composition was determined to be 30% (V/V) methanol in water and 2% (V/V) formic acid. NAFCs extracted from OSPW in the Athabasca oil sands region were used to demonstrate the feasibility of CE–MS for the analysis of NAFCs in environmental samples, showing that the labeled naphthenic acids are in the mass range of 350 to 1500m/z.

Application of rifampicin as a chiral selector for enantioresolution of basic drugs using capillary electrophoresis

Rifampicin, a member of rifamycin sub-class of antibiotics which belongs to the naphthalenic ansamycin class of antibiotics, has a characteristic ansa structure, i.e., a ring structure or chromophore spanned by an aliphatic chain. The present work was designed to evaluate its potential as a chiral selector (CS) as its structure consisting of nine stereogenic centers, an aromatic moiety and several functional groups (i.e., one imine, one amide, one acetoxy residue, two aliphatic hydroxyl and three phenolic hydroxyl groups) was expected to instigate multiple enantioselective interactions, namely, hydrogen bonding and inclusion complexation with chiral analytes, and therefore resulting in efficient enantioseparations. Systematic experiments were performed to investigate the effects of concentration of CS, composition of background electrolyte (BGE) and applied voltage on chiral separation. Enantiomers of propranolol and metoprolol were baseline resolved using a BGE consisting of 20mM CS and 50/50 (v/v) iso-propanol/phosphate buffer (100mM, pH 7.0) whereas for enantiomers of sertraline, a BGE consisting of 23mM CS and 40/60 (v/v) iso-propanol/phosphate buffer (100mM, pH 7.0) resulted in baseline resolutions.

Impact of capillary conditioning and background electrolyte composition on capillary electrophoresis analysis of prostate specific antigen isoforms

Glycoproteins expressed in the human body can experience modifications as result of pathological situations. Detection of those changes can be useful as disease biomarkers. As a result of these modifications, size and/or electrical charge of the glycoprotein can be altered. Migration in capillary zone electrophoresis (CZE) is governed by the size to charge ratio of the analyte and therefore this separation technique can be used to monitor those modifications. At its turn, the alteration of the electrophoretical pattern of a given glycoprotein could be used as disease biomarker. To this aim, high repeatability for separation of a large number of peaks for a given glycoprotein is desirable.For prostate cancer, new markers are needed to decrease the high number of false positive results provided by the biomarkers currently used in clinics. In this sense, CZE methods for analysis of the several prostate specific antigen (PSA) peaks which this glycoprotein exhibit, called isoforms and containing one or more glycoforms, could be useful to study the PSA pattern as prostate cancer marker.In this study two complementary strategies to achieve both lot-to-lot capillary repeatability and high resolution of a large number of PSA isoforms are developed. Better performance and precision have been obtained for capillaries conditioned with HCl than for those conditioned with NaOH. Optimization of the background electrolyte (BGE) pH value to 8.0 and inclusion of 3M urea on its composition were the two factors of highest impact for enhancing resolution of the highest number of PSA peaks. Under the optimized conditions for capillary conditioning and BGE pH and composition, long-term resolution of 10 isoforms of PSA was achieved. Inter-day (n=3) %RSD was 0.55 for the ratio tm/tEOF, 1.15 for μeff, and 5.02 for % Acorr of the PSA peaks.

The role of surfactants in intensifying and increasing the efficiency of the electroflotation extraction of sparingly soluble lanthanum compounds

Kinetic trends of electroflotation extraction of sparingly soluble lanthanum compounds from solutions containing NaCl, NaNO3, Na2SO4, and Na2CO3 were established and studied. The role of surfactants of anionic, cationic and nonionogenic natures, as well as flocculants (first, of anionic and cationic type) that depend on background electrolyte composition (sulfate, chloride, carbonate, nitrate) is determined as positive. The electroflotation extraction of lanthanum hydroxide is shown to proceed with an degree of extraction of up to 96%.

Comparative Characteristics of Voltammetric Methods Determination of Platinum in Mineral Raw Materials

The technique of platinum (IV) determination in mineral raw materials with the application of stripping voltammetry has been proposed. The authors determined the registration conditions in the determination of the analytical signal Pt (IV): the composition of background electrolyte, the electrolysis potential. The graphite electrode impregnated with polyethylene was used as a working electrode. The use of stripping voltammetry applied to the assessment of the platinum content in geological objects was demonstrated.

Nonaqueous Capillary Electrophoresis Mass Spectrometry.

The term nonaqueous capillary electrophoresis (NACE) commonly refers to capillary electrophoresis with purely nonaqueous background electrolytes (BGE). Main advantages of NACE are the possibility to analyze substances with very low solubility in aqueous media as well as separation selectivity that can be quite different in organic solvents (compared to water)-a property that can be employed for manipulation of separation selectivities. Mass spectrometry (MS) has become more and more popular as a detector in CE a fact that applies also for NACE. In the present chapter, the development of NACE-MS since 2004 is reviewed. Relevant parameters like composition of BGE and its influence on separation and detection in NACE as well as sheath liquid for NACE-MS are discussed. Finally, an overview of the papers published in the field of NACE-MS between 2004 and 2014 is given. Applications are grouped according to the field (analysis of natural products, biomedical analysis, food analysis, analysis of industrial products, and fundamental investigations).

A Systematic Procedure to Develop a Capillary Electrophoresis Method Using a Minimal Experimental Data

The choice of an appropriate background electrolyte (BGE) and its components for capillary electrophoresis analysis is the main step in capillary electrophoresis method development. The use of an inadequate co-ion component could lead to asymmetrical peaks and selecting an inappropriate counter-ion could affect the buffer capacity and the pH of the BGE, leading to unreliable analysis. In this paper, we describe a systematic procedure for the development of a capillary electrophoresis method, based on the effect of varying pH on the ion effective mobility, to optimize the BGE composition. The method was applied to the separation of L-ascorbic acid in different samples. The optimized background electrolyte composition was 40 mmol L-1 tris(hydroxymethyl)aminomethane and 20 mmol L-1 2-morpholinoethanesulfonic acid, at pH 8.1. Sorbic acid was used as the internal standard and separation was carried out in a fused-silica capillary (32 cm total length and 8.5 cm effective length, 50 µm inner diameter), with a short-end-injection configuration and direct ultraviolet (UV) detection at 266 nm. The separation was performed in 26 s. The method shows good linearity (R2 > 0.999), excellent values for inter-day and intra-day precision and good recovery (in the range of 94-107%). The values obtained for limit of detection (LOD) and limit of quantification (LOQ) were 0.14 and 41 mg L-1, respectively. The systematic procedure applied shows to be a very useful tool for the first step method development for capillary electrophoresis.

Determination of water-soluble vitamins in energy and sport drinks by micellar electrokinetic capillary chromatography

A method for the determination of water-soluble vitamins in several energy and sport drinks by micellar electrokinetic chromatography (MEKC) has been developed in this work. The separation of vitamins was studied in terms of background electrolyte composition (borate content, pH, surfactant type and content) and in other MEKC parameters. A study of the possible compounds found in the vitamin-enriched drinks that could interfere in vitamin determination was also performed, and a modified procedure with enhanced resolution was developed. The proposed method was successfully applied to the analysis of water-soluble vitamins in a variety of energy and sport drinks and also in fruit nectars. The method implies minimal sample preparation and reagent consumption, being environmentally sustainable. Thus, the proposed methodology could be useful for quality control purposes in the soft drink industry.

Characterization of Behavior of Colloidal Zero-Valent Iron and Magnetite in Aqueous Environment

Nano-sized iron colloids are formed as acid mine drainage is exposed to surface environments and is introduced into surrounding water bodies. These iron nanomaterials invoke aesthetic contamination as well as adverse effects on aqueous ecosystems. In order to control them, the characteristics of their behaviour should be understood first, but the cumulative research outputs up to now are much less than the expected. Using zero-valent iron (ZVI) and magnetite, this study aims to investigate the behaviour of iron nanomaterials according to the change in the composition and pH of background electrolyte and the concentration of natural organic matter (NOM). The size and surface zeta potential of iron nanomaterials were measured using dynamic light scattering. Characteristic behaviour, such as aggregation and dispersion was compared each other based on the DLVO (Derjaguin, Landau, Verwey, and Overbeek) theory. Whereas iron nanomaterials showed a strong tendency of aggregation at the pH near point of zero charge (PZC) due to electrostatic attraction between particles, their dispersions became dominant at the pH which was higher or lower than PZC. In addition, the behaviour of iron nanomaterials was likely to be more significantly influenced by cations than anions in the electrolyte solutions. Particularly, it was observed that divalent cation influenced more effectively than monovalent cation in electrostatic attraction and repulsion between particles. It was also confirmed that the NOM enhanced the dispersion nanomaterials with increasing the negative charge of nanomaterials by coating on their surface. Under identical conditions, ZVI aggregated more easily than magnetite, and which would be attributed to the lower stability and larger reactivity of ZVI.

A new fluorinated polymer as a modifier for liquid chromatography and capillary electrophoresis

The potential of a newly synthesized fluorinated copolymer of perfluoro(3,6-dioxa-4-methyl-8-nonene)sulfonyl fluoride with ethylene (AE FS-101SK) as a modifier of eluent in liquid chromatography and of background electrolyte in capillary electrophoresis is studied. It was found that, in reversed-phase HPLC, the use of a fluorine-containing modifier improves efficiency for hydrophobic adsorbates (steroid hormones and fat-soluble vitamins). In capillary electrophoresis, AE FS-101SK added to a background electrolyte can both modify the quartz capillary walls and act as a pseudostationary phase, enabling the separation of neutral analytes. In the simultaneous use of a fluorinated polymer modifier and sodium dodecyl sulfate in the composition of the background electrolyte, efficiency of 900 000 theoretical plates/m was achieved in the separation of steroid hormones by micellar electrokinetic chromatography.