B1 Chain Research Articles

Comparative analysis of granular starch hydrolysis and multi-structural changes by diverse α-amylases sources: Insights from waxy rice starch

Three cultivars of waxy rice starch with different multi-scale structures were subjected to α-amylase hydrolysis to determine amylopectin fine structure, production of oligosaccharides, morphology, and crystallinity of the partially hydrolyzed starch granules. α-amylases hydrolyzed the amylopectin B2 chain during the initial stage of hydrolysis, suggesting that it is primarily located in the outer shell of the granules. For waxy rice starch with loose structure, α-amylases attacked the crystalline and amorphous regions simultaneously in the initial stage, while for starch granules with compact structure, the outer shell blocklet (crystalline structure) can be a hurdle for α-amylases to proceed to hydrolysis of the internal granule structure. The ability of α-amylases from porcine pancreatic α-amylases to attack the outer shell crystalline structure was lower than that of α-amylases from Bacillus amyloliquefaciens and Aspergillus oryzae. These results show that α-amylase source and rice cultivar combinations can be used to generate diverse structures in degraded waxy rice starch.

Structure and functional characteristics of starch from different hulled oats cultivated in China

This work aimed to evaluate the structure and functional characteristics of starch from ten hulled oat cultivars grown in different locations in China. The protein, phosphorus, amylose, and starch contents were 0.2–0.4 %, 475.7–691.8 ppm, 16.2–23.0 %, and 93.6–96.7 %, respectively. All the starches showed irregular polygonal shapes and A-type crystallization with molecular weights ranging from 7.2 × 107 to 4.5 × 108 g/mol. The amounts of amylopectin A (DP 6–12), B1 (DP 13–24), B2 (DP 25–36), and B3 (DP > 36) chains were in the ranges of 10.3–16.0 %, 54.5–64.8 %, 16.5–21.1 %, and 4.9–13.1 %, respectively. The starches differed significantly in gelatinization temperatures, pasting viscosity, solubility, swelling power, rheological properties, and digestion parameters. The results revealed that the larger particle size could increase the peak viscosity of the starch paste. The presence of phosphorus increased the gelatinization temperature and enhanced the resistant starch content. The starch granules with higher crystallinity contained a higher proportion of phosphate, which increased final viscosity and setback viscosity but decreased rapidly digestible starch. Overall, oat starch with a high phosphorus content could be used to prepare low-glycemic-index food for diabetes patients.

Weakening the integrity of waxy starch granules by selective degradation of amorphous matrices using gaseous hydrogen chloride

Waxy corn starch with 6–12 % moisture was degraded by gaseous hydrogen chloride (HCl(g)) then characterized chromatographically and microscopically to investigate the relationship between moisture-resulting changes in unit chain properties of starch and its susceptibility to swelling. Starches with the highest degradation extents at different moisture content had recoveries of 76–83 % (w/w) and the weight-average degrees of polymerization of 66–93 anhydroglucose unit. Additionally, the HCl(g)-degraded starches were still of birefringent granules but with internal cavity. When increasing the swelling temperature from 25 to 40 °C, some granules showed enlarged internal cavity, and some were fragmented. Change in granule morphology, accompanied by leaching of constituting polymers, was particularly evident for starch with preferential degradation of B1 chains over B2+ chains as the moisture content decreased from 9 % to 6 %. These findings not only manifest the impact of changes in B2+ and B1 chains on the swelling characteristic of HCl(g)-degraded granules, but also demonstrate an approach for weakening the integrity of granules by selective degradation of amorphous matrices using HCl(g).

Enzymatic Modification of Starch Using Recombinant Genes from Sorghum in Escherichia coli: Insights and Potential Applications.

SBEIIb (Sobic.004G163700), SSSIIa (Sobic.010G093400), and GBSSI (Sobic.010G022600) genes that regulate starch synthesis in sorghum endosperm were transferred into Escherichia coli by transgenic technology. SBEIIb, SSSIIa, and GBSSI enzymes were separated and purified through a Ni column and analyzed by electrophoresis with molecular weights and activities of 91.57 84.57, and 66.89 kDa and 551 and 700 and 587 U/μL, respectively. Furthermore, they were applied to starch modification, yielding interesting findings: the A chain content increased from 25.79 to 89.55% for SBEIIb-treated waxy starch, while SSSIIa extended the A chain to form DPs of the B chain, with A chain content decreasing from 89.55 to 37.01%, whereas GBSSI was explicitly involved in the synthesis of B1 chain, with its content increasing from 9.59 to 48.45%. Modified starch was obtained, which could be accurately applied in various industries. For instance, we prepared a sample (containing 89.6% A chain content) with excellent antiaging and antidigestion properties through SBEIIb modification. Moreover, higher RS3 (34.25%) and SDS contents (15.75%) of starch were obtained through the joint modification of SBEIIb and SSSIIa. These findings provide valuable insights for developing sorghum starch synthesis-related enzymes and offer opportunities for improving starch properties through enzymatic approaches.

Impact of high temperature on microstructural changes and oil absorption of tigernut (Cyperus esculentus L.) starch: Investigations in the starch-oil model system

This study was to explore the internal reasons for the changes in oil absorption performance of tigernut starch (TS) by revealing the high-temperature induced variations of structural and functional properties of TS. The results showed that as the temperature increased from 80 °C to 140 °C, the degree of starch gelatinization increased, while the proportion of double helix structures, the total proportion of B1 and B2 chains, the relative crystallinity and the molecular weight decreased, accompanied by the fragmentation and swelling of TS granules. The oxidation of tigernut oil (TNO) led to a decrease in oil density and an increase in total polar component content. These phenomena could result in an increase of oil absorption capacity of TS and starch-lipid complex index. With further increase in temperature from 170 °C to 200 °C, the disruption of the crystalline structure and chain structure increased, resulting in the melting and disintegration of TS granules. This caused a decrease in the starch-oil contact area and capillary absorption of TNO by the TS granules. The results will contribute to revealing the effect of high-temperature induced changes in the structural and functional properties of TS on its oil absorption properties.

Effect of different screw speeds on the structure and properties of starch straws

To illustrate the action mechanism of screw speed on the performance of starch-based straws during the extrusion process, starch-based straws at different screw speeds were prepared using a twin-screw extruder and the structures and characteristics were compared. The results indicated that as screw speeds improved from 3 Hz to 13 Hz, the A chain of amylopectin increased from 25.47 % to 28.87 %, and the B3 chain decreased from 6.34 % to 3.47 %. The absorption peak of hydroxyl group shifted from 3296 cm−1 to 3280 cm−1. The relative crystallinity reduced from 13.49 % to 9.89 % and the gelatinization enthalpy decreased from 3.5 J/g to 0.2 J/g. The performance of starch straws did not increase linearly with increasing screw speeds. The starch straw produced at screw speed of 7 Hz had the largest amylose content, the highest gelatinization temperature, the minimum bending strength, and the lowest water absorption rate in hot water (80 °C). Screw speed had a remarkable impact on the mechanical strength, toughness and hydrophobicity of starch-based straws. This study revealed the mechanism of screw speed on the mechanical strength and water resistance of starch straws in the thermoplastic extrusion process and created the theoretical basis for the industrial production of starch-based straws.

Starch molecular structure, physicochemical properties and in vitro digestibility of Ethiopian malt barley varieties

Characterization of local varietal barley quality diversity can help boost further development of novel value-added utilization of the grain. Therefore, in this study starch was isolated from 11 Ethiopian malting barley varieties to determine starch structural, pasting, thermal and digestibility characteristics, and their inter-relationships. The varieties showed significant differences in all amylopectin chain length fractions, and the A, B1, B2 and B3 chains ranged from 25.4 to 30.1, 47.4–50.1, 14.3–16.0 and 7.8–9.0 %, respectively. The varieties also exhibited significant variation in amylose content, relative crystallinity, absorbance peak ratios, pasting and thermal properties. Moreover, on average about 83 % raw starch of the varieties was classified as slowly digestible and resistant, whereas after gelatinization this was reduced to 9 %. Molecular and crystalline structures were strongly related to pasting properties, thermal characteristics and in vitro digestibility of the starches. The study provides information on some starch quality characteristics and the inter-relationships among the parameters, and might inspire further studies to suggest possible target-based starch modifications, and future novel utilization of barley. More studies are required to investigate the association of starch quality parameters with malting quality attributes.

Waxes from Long-Chain Aliphatic Difunctional Monomers.

Petrochemical polyethylene waxes (Mn = 800-8000 g/mol for commercial Ziegler waxes) as additives, lubricants, and release agents are essential to numerous products and production processes. The biodegradability of this class of compounds when unintentionally released to the environment is molar mass dependent and subject to ongoing discussions, and alternatives to conventional polyethylene waxes are desirable. By employing bottom-up and top-down approaches, that is nonstoichiometric A2 + B2 polycondensation and chain scission, respectively, linear waxes with multiple in-chain ester groups as biodegradation break points could be obtained. Specifically, waxes with 12,12 (WLE-12,12, WLE = waxes linear ester) and 2,18 (WLE-2,18) carbon atom linear ester repeat unit motifs were accessible over a wide range of molar masses (Mn ≈ 600-10 000 g/mol). In addition to the molar mass, the type of end group functionality (i.e., methyl ester, hydroxy, or carboxylic acid end groups) significantly impacts the thermal properties of the waxes, with higher melting points observed for carboxylic acid end groups (e.g., Tm = 83 °C for carboxylic acid-terminated WLE-12,12 with Mn,NMR = 1900 g/mol, Tm = 92 °C for WLE-2,18 with Mn,NMR = 2200 g/mol). A HDPE-like orthorhombic crystalline structure and rheological properties comparable to a commercial polyethylene wax suggest WLE-12,12 and WLE-2,18 are viable biodegradable and biosourced alternatives to conventional, petrochemical polyethylene waxes.

Impact of molecular structure of starch on the glutinous taste quality of cooked chestnut kernels

Chestnuts are a starchy food with a characteristic glutinous taste that is often used to assess their quality. In this study, our findings indicated that chestnuts with higher glutinous taste quality had lower amylose content and microcrystalline structures, as well as higher subcrystalline structures and relative crystallinity in both the raw and steamed starches. In the leached starch, chestnuts with higher glutinous taste quality had lower amylopectin B1 chains and microcrystalline structure, but higher amylopectin B2 chains, subcrystalline structure and relative crystallinity. These results suggest that amylose content, relative crystallinity, and amylopectin chain length distribution are important factors determining the glutinous taste quality of chestnuts. To further enhance our understanding of these factors, an sensory evaluation model was developed based on textural profile analysis parameters. This study provides valuable insights into the relationship between molecular structure of starch and the glutinous taste quality of starchy foods.

Understanding the Relationship between the Molecular Structure and Physicochemical Properties of Soft Rice Starch.

The relationship between the molecular structure and physicochemical properties of soft rice starch (SRS) has been investigated in this research. The amylose content of SRS ranged from 10.76% to 11.85%, classified as the very low amylose type. Compared to waxy and japonica rice starch, the largest amount of small starch granules and the highest viscosity were shown in the SRS. The results of X-ray diffraction and Fourier transform infrared proved that the SRS depicted a typical A-type pattern with a low short-range ordered structure. Additionally, SRS had a great deal of A and B1 chains. Molecular weights and density of starch from soft rice were lower than those from waxy rice but higher than those from japonica rice. Furthermore, SRS possessed a higher amount of resistant starch. Correlation analysis indicated that the amylose content and the chain-length distributions of amylopectin play a major role in influencing the molecular structure and physicochemical properties of rice starch. In conclusion, the low amylose content, highest viscosity, and other excellent properties of soft rice starch make it have bright application prospects in instant rice and rice cakes.

Effects of starch multiscale structure on the physicochemical properties and digestibility of Radix Cynanchi bungei starch

Radix Cynanchi bungei (RCb) contains 40–70 % starch, yet little is known about the structure and properties of RCb starch. In this study, the multiscale structure of two cultivars of RCb starch (YW201501 and BW201001) were characterized, and the effects of starch structure on its physicochemical properties were investigated. The differences in physicochemical properties of RCb starch were influenced by its multiscale structure. The starch granules were round and irregular polygon, with sizes ranging between 2 and 14 μm. YW201501 had a higher amylose (21.81 %) and lipid (0.96 %) content, molecular weight (59.5 × 106 g/mol), and A chain proportion (27.5 %), and a lower average granule size (6.14 μm), amylopectin average chain length (19.7), and B3 chain proportion (10.3 %). Both starches were B-type crystalline, with higher crystallinity (26.3 %) and R1047/1022 (0.74) for YW201501, resulting in large gelatinization enthalpy. In addition, the higher peak viscosity and larger retrogradation degree of YW201501 were correlated to its higher amylose content. In vitro digestibility revealed that the low rapidly digestible starch and high resistant starch of BW201001 were related to the fine structure of starch. YW201501 and BW201001 had a medium glycemic index (62.6–66.0) with potential for processing into healthy starchy foods.

Effects of electron beam irradiation pretreatment on the substitution degree, multiscale structure and physicochemical properties of OSA-esterified rice starch

In order to investigate the effect of electron beam irradiation (EBI) pretreatment on the structure and physicochemical properties of octenyl succinic acid (OSA) esterified rice starch. In this study, rice starch was pretreated with EBI (2, 4, 6 KGy) followed by OSA esterification (3%, 6%). EBI pretreatment significantly increased the OSA-esterified starch's degree of substitution (0.0173–0.0305). However, the relative crystallinity of OSA-esterified starch decreased after EBI pretreatment. And the peak viscosity, trough viscosity and final viscosity of starch decreased significantly with the increase in irradiation dose. Moreover, EBI pretreatment significantly reduced gelatinization temperature and B3 chain content of OSA-esterified starch, and significantly increased transparency, solubility, swelling power and A chain content. In addition, OSA-esterified starch's RDS content decreased and RS + SDS content increased after EBI pretreatment. The PCA results suggest that EBI may affect the physicochemical properties of starch by acting on its structure. The results showed that EBI pretreatment improved the physicochemical and functional properties of OSA-esterified starch, which is expected to broaden its application scope.

Loss of ADP-glucose transporter in barley sex1 mutant caused shrunken endosperm but with elevated protein and β-glucan content in whole meal

Grain shape and plumpness affect barley yield. Despite numerous studies on shrunken endosperm mutants in barley, their molecular mechanism and application potential in the food industry are largely unknown. Here, map-based cloning, co-segregation analyses, and allelic variant validation revealed that the loss of HORVU6Hr1G037950 encoding an ADP-glucose transporter caused the shrunken endosperm in sex1. Haplotype analysis suggested that hap4 in the promoter sequence was positively related to the hundred-grain weight showing a breeding potential. A pair of near-isogenic lines targeting HORVU6Hr1G037950 was produced and characterized to investigate molecular mechanisms that SEX1 regulates endosperm development. Results presented that the absence of the SEX1 gene led to the decrease of starch content and A-type granules size, the increase of β-glucan, protein, gelatinization temperature, soluble sugar content, amylopectin A chains, and B1 chains. Enzymatic activity, transcriptome and metabolome analyses revealed the loss of SEX1 results in an impaired ADP-glucose-to-starch conversion process, consequently leading to higher soluble sugar contents and lower starch accumulation, thereby inducing a shrunken-endosperm phenotype in sex1. Taken together, this study provides new insights into barley grain development, and the elevated protein and β-glucan contents of the whole meal in sex1 imply its promising application in the food industry.

Multi-scale structural characteristics of black Tartary buckwheat resistant starch by autoclaving combined with debranching modification

The impact of autoclaving or autoclave-debranching treatments on the multi-scale structure of resistant starch (RS) and the relationship with starch digestion remains unclear, despite their widespread use in its preparation. This work investigated the relationship between RS structure in black Tartary buckwheat and its digestibility by analyzing the effects of autoclaving and autoclave-debranching combined treatments on the multi-scale structure of RS. The results showed that black Tartary buckwheat RS exhibited a more extensive honeycomb-like network structure and enhanced thermal stability than either black Tartary buckwheat native starch (BTBNS) or common buckwheat native starch (CBNS). Autoclaving and autoclaving-debranching converted A-type native starch to V-type and possibly the formation of flavonoid-starch complexes. Autoclaving treatment significantly increased the proportion of short A chain (DP 6-12) and the amylose (AM) content, reduced the viscosity and the total crystallinity. Notably, the autoclave-debranching co-treatment significantly enhanced the resistance of starch to digestion, promoted the formation of perfect microcrystallines, and increased the AM content, short-range ordered degree, and the proportion of long B2 chain (DP 25-36). This study reveals the relationship between the multi-scale structure and digestibility of black Tartary buckwheat RS by autoclaving combined with debranching modification.

Recrystallized Resistant Starch: Structural Changes in the Stomach, Duodenum, and Ileum and the Impact on Blood Glucose and Intestinal Microbiome in Mice.

The structure and properties of resistant starch (RS) and its digestive products were assessed in mice. Digestion of recrystallized (group RS3, including RS3a and RS3b) and control RS (RS2, RS4, and RS5) in the stomach, duodenum, and ileum of mice was systematically analyzed along with in vivo digestive degradation of RS3. RS3a and RS3b significantly reduced the release of blood glucose. During in vivo digestion, the proportion of ultrashort and A chains in the RS3a and RS3b digestive residues gradually increased, whereas the proportion of B1 and B2 chains gradually reduced. B3+ chain proportions did not change. The final digestive residues in the ileum (RS3a-I90 and RS3b-I90) maintained a high proportion of suitable chain length, accounting for more than 60%. The crystalline structure of RS3a-I90 was weakened, indicating the hydrolysis of partial crystal structure. In comparison, RS3b-I90 maintained an orderly crystalline structure, indicating its higher resistance to enzymatic hydrolysis. In vivo experiments showed that RS could maintain the normal growth of mice and effectively control weight gain. RS3a significantly increased the concentrations of acetic, propionic, and butyric acids, while reducing the abundance of Firmicutes to Bacteroidetes ratio, further confirming the benefits of RS3 in gastrointestinal health.

Physicochemical properties of waxy rice varieties with contrasting hardening rates

ABSTRACT In the present study, four waxy rice varieties (two japonica and two indica) with contrasting hardening rates were used for physicochemical properties investigation. The results showed that the hardness of cooked rice grains from zhenzhunuo and zhennuo29 increased slowly after cool storage, whereas those from zaonuo5 and yj98 raised rapidly. The peak gelatinisation temperatures for yj98, zaonuo5, zhennuo29, and zhenzhunuo flours were 78.60°C, 73.55°C, 69.00°C, and 67.25°C, respectively. The retrogradation enthalpies of stored flours (4°C, 48 h) followed the order: yj98 (3.876 J/g) > zaonuo5 (2.202 J/g) > zhennuo29 (1.684 J/g) > zhenzhunuo (1.370 J/g). Scanning electron microscopy (SEM) results exhibited that after cool storage, the cooked rice grains of zhenzhunuo and zhennuo29 had no obvious changes in morphology, whereas zaonuo5 presented increased cavities and yj98 occurred new fissures. Among intra-subspecies varieties, the rapid hardening rice accessions had a lower ratio of A chains (DP 6–12) but larger proportion of B3 chains (DP ≥ 37) than that of the corresponding genotypes with slow hardening. The physicochemical characteristics disclosed here will facilitate the application of the four cultivars in food processing industry.

Structural and physicochemical properties of bracken fern (Pteridium aquilinum) starch.

Bracken fern (Pteridium aquilinum) starch is a non-mainstream, litter-researched starch, thus the starch characteristics remain largely unknown. The structural and physicochemical properties of two bracken starches were systematically investigated, by use of various techniques that routinely applied in starch analysis. The starches had amylose contents of 22.6 and 24.7%, respectively. The starch granules possessed C-type polymorph with D (4,3) ranging from 18.6 to 24.5 μm. During gelatinization event, the bracken starches showed lower viscosity than typical for rice starch, and lower gelatinization temperature than typical for cereal starches. After gelatinization event, bracken starches formed much softer and sticky gel than rice and potato starch. The molecular weight and branching degree (indexed by Mw, Mn and Rz values) of bracken starches were much higher than starches of many other sources. The branch chain length distributions showed that the bracken starches were structurally similar to some rice varieties (e. g. BP033, Beihan 1#), as reflected by proportions of A, B1, B2, and B3 chains. Notable differences in some starch traits between the two bracken starches were recorded, e. g. amylose content, gel hardness, gelatinization temperature and traits of structural properties. This study provides useful information on the utilization of bracken starch in both food and non-food industries.

Understanding the structural contributions to the functional properties of chestnut starch high in resistant starch type-2.

Chestnut has recently attracted attention because of its exceptional functional properties, which are mainly influenced by the structural properties of chestnut starch (CS). In this study, ten varieties of chestnut from the northern, southern, eastern, and western regions of China were selected, and their functional properties, including thermal properties, pasting properties, in vitro digestibility, and multi-scale structural characteristics were characterized. The relationship between structure and functional properties was clarified. In the varieties that were studied, the pasting temperature of CS was in the range of 67.2-75.2 °C and the pastes displayed diverse viscosity characteristics. Slowly digestible starch (SDS), and resistant starch (RS) of CS were in the range of 17.17-28.78% and 61.19-76.10%, respectively. Chestnut starch from north-eastern China exhibited the highest RS content of 74.43-76.10%. Structural correlation analysis revealed that smaller size distribution, fewer B2 chains, and thinner lamellae thickness contributed to higher RS content. Meanwhile, CS with smaller granules, more B2 chains, and thicker amorphous lamellae displayed lower peak viscosities, stronger resistance to shear, and higher thermal stability. Overall, this study clarified the relationship between the functional properties and the multi-scale structure of CS, revealing the structural contributions to its high RS content. These findings provide significant information and basic data for use in the creation of nutritional chestnut food. © 2023 Society of Chemical Industry.

Unveiling the retrogradation mechanism of a novel high amylose content starch-Pouteria campechiana seed.

The research of starch retrogradation have been attracting interest. Thereby, the long-term retrogradation mechanism (0-21days) of Pouteria campechiana seed starch (PCSS) was investigated. The results showed that crystal type was changed from A- to B+V-type during retrogradation. The retrogradation PCSS (RPCSS) exhibited faster retrogradation rate and more compact internal ultra-structure compared to rice, wheat and maize starch. Pearson correlation indicated that, as retrogradation days increased, values of α-1,4-glycosidic bond, A chains, double helix, V-type polymorphism, Mw, relative crystallinity (Rc) and short-range order gradually significantly increased, and B1 chains, B3+chains values gradually significantly dropped (p<0.05). These inferred an increasing peak temperature and compactness of morphology with increasing retrogradation days. Compared to native starch, RPCSS α-1.4-glycosidic bond was increased, which indicated that its quick molecules degradation including decreased Mw, B3+chains, Rc, semicrystalline order, and ΔH. These might provide a theoretical direction for preparation of starch-basis food.

Structural, functional and mechanistic insights uncover the role of starch in foxtail millet cultivars with different congee-making quality

Ten foxtail millet cultivars with different congee-making quality were investigated for relationships between starch structures, functional properties and congee-making qualities. Swelling power, pasting peak viscosity (PV) and setback (SB), gel hardness and resilience, and gelatinization onset (To), peak (Tp) and range (R) temperature were correlated with congee-making performance significantly. Good eating-quality cultivars with these parameters were in the range of 15.41–18.58 %, 3095–3279 cp, 1540–1745 cp, 430–491 g, 0.47–0.57, 64.43–65.28 °C, 69.97–70.32 °C and 23.38–24.52 °C, respectively. Correlation analysis showed that amylose, amylopectin B2 chains and A21 were essential parameters controlling the functional properties. Amylose molecules with linear molecular morphology would cause crystal defects and a wide range of molecular weight distribution. Additionally, they were more prone to re-association, which influenced the PV, SB, To, Tp and gel hardness. B2 chains impacted the gelatinization temperature range (R), gel resilience and swelling behavior by affecting the alignment of double helices and the size of starch particles and pores. Starch with more binding sites of bound water (A21) tended to leach from the swelling granules easily and contributed to higher values of PV. The content of amylose, B2 chains and A21 of good eating-quality cultivars were 16.19–18.46 %, 11.60–11.69 % and 96.50–97.02 %, respectively.